Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published

    "Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".

    Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  2. Published

    "Supercritical carbon dioxide in water" emulsion-templated synthesis of porous calcium alginate hydrogels

    Partap, S., Rehman, I., Jones, J. R. & Darr, J. A., 2006, In: Advanced Materials. 18, 4, p. 501-504 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. Published

    (Ethyl lactate)-gel high pressure CO2 extraction for the processing of mesoporous gelatine particles

    Paninho, A. B., Barbosa, C., Nogueira, I. D., Najdanovic-Visak, V. & V. M. Nunes, A., 11/2013, In: Journal of Supercritical Fluids. 83, p. 35–40 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    (Hydroxypropyl)methylcellulose mediated synthesis of highly porous composite scaffolds for trabecular bone repair applications

    Khan, A. F., Afzal, A., Chaudhary, A. A., Saleem, M., Shahzadi, L., Jamal, A., Yar, M., Habib, A. & Rehman, I. U., 1/06/2015, In: Science of Advanced Materials. 7, 6, p. 1177-1186 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Unpublished

    (Invited Lecture) Advise to the Greek government on renewable energy issues, Hon. George Vagionas MP

    Aggidis, G. A., 2005, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  6. Unpublished

    (Invited) Advances and results towards super-efficient klystrons

    Lingwood, C. J., 2016, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  7. Published

    (INVITED) All solution processed metal oxide-based Thin Film Transistors for CMOS technologies

    Adamopoulos, G., 08/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  8. Unpublished

    (Invited) Development of klystrons with ultimately high - 90% RF power production efficiency

    Lingwood, C. J., 24/03/2015, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  9. Unpublished

    (Invited) Development of the high efficiency MBK klystron for FCC

    Lingwood, C. J., 21/01/2016, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  10. Unpublished

    (Invited) High-power, high-efficiency klystrons

    Lingwood, C. J., 4/11/2015, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  11. Unpublished

    (Invited) Klystrons

    Lingwood, C. J., 1/03/2016, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  12. Published
  13. Published
  14. Published
  15. Published
  16. Published

    (INVITED) Solution Processed SiO2 and high-k Dielectrics for MO-based CMOS TFTs

    Adamopoulos, G., 12/10/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  17. Published

    (INVITED) Solution-processed metal oxide-based CMOS

    Adamopoulos, G., 15/10/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  18. Published

    “We don’t really” an exploratory investigation into innovation management in SMEs

    Lambert, C. & Ashwin, P., 19/05/2022. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  19. Published
  20. Published

    0.22 THz TWT based on the double corrugated waveguide

    Paoloni, C. & Mineo, M., 04/2014, 15th IEEE International Vacuum Electronic Conference. Piscataway, N.J.: IEEE, p. 227-228 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    1.55μm Efficient Temperature Insensitive GaSb-based Lasers for Telecoms Applications

    Bentley, M., 2021, Lancaster University. 165 p.

    Research output: ThesisDoctoral Thesis

  22. Published

    100 % amplitude modulation of an external cavity terahertz QCL using an optoelectronic chopper based on metamaterials and graphene

    Kindness, S. J., Jessop, D. S., Wei, B., Wallis, R., Kamboj, V. S., Xiao, L., Ren, Y., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. A. & Degl'lnnocenti, R., 29/06/2017, 2017 European Conference on Lasers and Electro-Optics and European Quantum Electronics Conference. OSA - The Optical Society, CB_2_4. (Optics InfoBase Conference Papers; vol. Part F82-CLEO_Europe 2017).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    1-THz Cascade Backward Wave Amplifier

    Paoloni, C., Mineo, M., Di Carlo, A., Durand, A. J., Krozer, V., Kotiranta, M., Bouamrane, F., Bouvet, T. & Megtert, S., 1/04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International . IEEE, p. 237-238 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  24. Published

    2D Analysis of Multimode Photonic Crystal Resonant Cavities with the Finite Volume Time Domain Method

    Pinto, D. & Obayya, S., 2008, In: Optical and Quantum Electronics. 40, 11-12, p. 875-890 16 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Published

    2-D and 3-D Integration of Heterogeneous Electronic Systems under Cost, Performance and Technological Constraints

    Weerasekera, R., Pamunuwa, D., Zheng, L-R. & Tenhunen, H., 08/2009, In: IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 28, 8, p. 1237-1250 14 p.

    Research output: Contribution to Journal/MagazineJournal article

  26. Published

    2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization

    Chi, Y., Huang, B., Saafi, M., Fullwood, N., Lambert, C., Whale, E., Hepworth, D. & Ye, J., 13/09/2021, In: Construction and Building Materials. 299, 23 p., 123867.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    2D finite element analysis of thermally bonded nonwoven materials: continuous and discontinuous models

    Hou, X., Acar, M. & Silberschmidt, V., 09/2009, In: Computational Materials Science. 46, 3, p. 700–707 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    2-D Mxene flakes as potential replacement for both TCO and Pt layers for Dye-Sensitized Solar cell

    Ahmad, M. S., Pandey, A. K., Abd Rahim, N., Aslfattahi, N., Mishra, Y. K., Rashid, B. & Saidur, R., 31/10/2021, In: Ceramics International. 47, 19, p. 27942-27947 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    2-D particle-in-cell simulations of high efficiency klystrons

    Constable, D., Lingwood, C. J., Burt, G. C., Syratchev, I., Baikov, A. Y., Marchesin, R. & Kowalczyk, R., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  30. Published

    346 GHz BWO for fusion plasma diagnostics

    Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  31. Published

    346 GHz source for plasma diagnostic applications

    Barchfeld, R., Popovic, B., Tang, X., Yue, L., Zhang, F., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  32. Published

    3D Analysis of Plasmonic Waveguides Using a Fourth-Order Accurate Finite Difference Subsampling Technique

    B.Hu, P. Sewell, J. Wykes, A. Vukovic, J. J. Lim and T. Benson, 2006.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  33. Published

    3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 05/2000, In: Journal of the Mechanics and Physics of Solids. 48, 5, p. 1037-1063 27 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    3D Arrays of Super-Hydrophobic Microtubes from Polypore Mushrooms as Naturally-Derived Systems for Oil Absorption

    Balzamo, G., Singh, N., Wang, N., Vladisavljević, G. T., Bolognesi, G. & Mele, E., 3/01/2019, In: Materials. 12, 1, 132.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Forthcoming

    3D Meander Line Slow Wave Structure for W-band TWT

    Socuellamos, J., Letizia, R., Dionisio, R. & Paoloni, C., 29/01/2020, (Accepted/In press) Proceedings 21th International Vacuum Electronics Conference. Springer, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  36. Published
  37. Published

    3D Motion Control of Connected Augmented Virtuality on Mobile Phones.

    Chehimi, F., Coulton, P. & Edwards, R., 10/07/2008, Proceedings of the 2008 International Symposium on Ubiquitous Virtual Reality. Gwangju: IEEE Computer Society, p. 67-70 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  38. Published

    3D printed facial laser scans for the production of localised radiotherapy treatment masks

    Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published

    3-D simulation of a soft-landing tilted electric field collector for linear beam tubes.

    Kumar, L. & Carter, R. G., 12/1996, Proceedings of the Asia-Pacific microwave conference. New Delhi

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  40. Published

    3-D simulation of asymmetric multistage depressed collectors with secondary electron emission effects for high efficiency space TWTs

    Ghosh, T. K. & Carter, R. G., 1/01/2001, In: ITG-Fachbericht. 165, p. 67-71 5 p.

    Research output: Contribution to Journal/MagazineConference articlepeer-review

  41. Published

    3-D simulation of asymmetric multi-stage depressed collectors with secondary electron emission effects for high efficiency space TWTs.

    Ghosh, T. K. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  42. Published

    3DB challenge for DfT, DfM, DOT and BIST integration into analogue and mixed signal ICs.

    Lechner, A., Burbidge, M. J., Richardson, A. M. D. & Hermes, B., 2001, Proceedings of the 2nd Latin-American test workshop (LATW ’01). p. 194-199 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  43. Published

    3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity

    Zhang, Z., Huang, Y., Kasinathan, A. R., Shahabad, S. I., Ali, U., Mahmoodkhani, Y. & Toyserkani, E., 31/01/2019, In: Optics and Laser Technology. 109, p. 297-312

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    3-Dimensional simulation of multistage depressed collectors on microcomputers.

    Kumar, L., Spadtke, P., Carter, R. G. & Perring, D., 09/1995, In: IEEE Transactions on Electron Devices. 42, 9, p. 1663-1673 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    4.11 - Biological and Microbial Fuel Cells

    Da Li, L., Şahin, S., Izadi, P., Ghangrekar, M., Duteanu, N. M., Erable, B., Scott, K. & Yu, E. H., 2/03/2022, Comprehensive Renewable Energy, Second Edition: Volume 1-9. Elsevier, Vol. 1-4. p. 290-316 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  46. Published

    71 – 76 GHz Traveling Wave Tube for High Data Rate Satellite Communication

    Li, X., Huang, X., Letizia, R. & Paoloni, C., 9/02/2018, IVEC 2017 - 18th International Vacuum Electronics Conference. IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  47. Published

    A 0.35 THz Extended Interaction Oscillator based on Overmoded and Bi-Periodic Structure

    Xu, C., Meng, L., Paoloni, C., Qin, Y., Bin, L., Wang, B., Li, H. & Yin, Y., 30/11/2021, In: IEEE Transactions on Electron Devices. 68, 11, p. 5814-5819 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  48. Published

    A 16-channel real-time digital processor for pulse-shape discrimination in multiplicity assay

    Joyce, M., Aspinall, M., Cave, F. & Lavietes, A., 06/2013, Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on. Piscataway, N.J.: IEEE, p. 1-5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  49. Published

    A 16-channel real-time digital processor for pulse-shape discrimination in multiplicity assay

    Joyce, M., Aspinall, M., Cave, F. & Lavietes, A., 08/2014, In: IEEE Transactions on Nuclear Science. 61, 4, p. 2222-2227 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    A 2D electro-mechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 2015, In: Biomed Research International. 2015, 12 p., 854953.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    A 2D Electromechanical Model of Human Atrial Tissue Using the Discrete Element Method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 25/10/2015, In: Biomed Research International. 2015, 13 p., 854953.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  52. Published

    A 2–dimensional Hammerstein model for heating and ventilation control of conceptual thermal zones

    Tsitsimpelis, I. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  53. Published

    A 3D BEM modelling of body-scanning MIT system.

    Pham, M. . H. & Peyton, A. J., 2004, Proceedings of the XII international conference on electrical bio-impedance.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  54. Published

    A 3D imaging system for measuring the shape and volume of the human body.

    Wan-Daud, W. A., Tapp, H. S., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 358-363 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  55. Published

    A 3D inverse finite element technique applied to experimental magnetic induction tomography data.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  56. Published

    A 4-channel multiplex analyzer for real-time, parallel processing of fast scintillators

    Joyce, M. J., Gamage, K. A. A., Aspinall, M. D., Cave, F. D. & Lavietes, A., 2012, IEEE Nuclear Science Symposium and Medical Imaging Conference Record (NSS/MIC). IEEE, p. 134-138 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  57. Published

    A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture

    Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  58. Published

    A Bidirectional Modular Cuk-Based Power Converter for Shore Power Renewable Energy Systems

    Darwish, A., 27/12/2022, In: Energies. 16, 1, 28 p., 274.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    A bio-hybrid tactile sensor incorporating living artificial skin and an impedance sensing array

    Cheneler, D., Buselli, E., Camboni, D., Anthony, C., Grover, L., Adams, M. J. & Oddo, C., 10/12/2014, In: Sensors. 14, 12, p. 23781-23802 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to Journal/MagazineMeeting abstractpeer-review

  61. Published

    A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures

    Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  62. Published

    A bioresorbable peripheral nerve stimulator for electronic pain block

    Lee, G., Ray, E., Yoon, H. J., Genovese, S., Choi, Y. S., Lee, M. K., Şahin, S., Yan, Y., Ahn, H. Y., Bandodkar, A. J., Kim, J., Park, M., Ryu, H., Kwak, S. S., Jung, Y. H., Odabas, A., Khandpur, U., Ray, W. Z., MacEwan, M. R. & Rogers, J. A., 5/10/2022, In: Science Advances. 8, 40, eabp9169.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  63. Published

    A breakthrough adsorption study of modified activated carbon using different environmentally-friendly activating agents

    Hussin, F., Kiat, L. B., Yusoff, R. & Aroua, M. K., 31/01/2024, In: Environmental Engineering Research. 29, 1, 230005.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  64. Published

    A Brownian Dynamics Simulation of Enzyme-Substrate Encounters at the Surface of a Colloidal Particle

    Dickinson, E. & Honary, F., 1986, In: Journal of the Chemical Society. Faraday Transactions Part 2. 82, p. 719-727 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  65. Published

    A built-in test solution for a SMART silicon micromachined resonant pressure sensor.

    Jeffery, C., Rosing, R. & Richardson, A. M. D., 2000, IEEE European Test Workshop. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  66. Published

    A capacitance and optical method for the static and dynamic characterization of micro electro mechanical systems (MEMS) devices.

    Richardson, A. M. D., Ferraris, E., Fassi, I., De Masi, B. & Rosing, R., 1/09/2006, In: Microsystem Technologies. 12, 10-11, p. 1053-1061 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  67. Published

    A Case Study of Fractional-Order Control

    Alarfaj, Y., 1/09/2021, Lancaster University. 179 p.

    Research output: ThesisDoctoral Thesis

  68. Published

    A case study of using cosmic ray muons to monitor supercritical CO2 migration in geological formations

    Zhong, J. & Jiang, X., 1/01/2017, In: Applied Energy. 185, 2, p. 1450-1458 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  69. Published

    A CFD model of laser cladding: From deposition head to melt pool dynamics

    Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  70. Published

    A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, In: Physics Procedia. 5, B, p. 337-346 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    A chemical kinetic modelling study of the combustion of CH4–CO–H2–CO2 fuel mixtures

    Fischer, M. C. P. & Jiang, X., 05/2016, In: Combustion and Flame. 167, p. 274-293 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  72. Unpublished

    A closer look at high-energy X-ray-induced bubble formation during soft tissue imaging

    Xian, R. P., Brunet, J., Huang, Y., Wagner, W. L., Lee, P. D., Tafforeau, P. & Walsh, C. L., 14/02/2023, (Unpublished) bioRxiv.

    Research output: Working paperPreprint

  73. Published

    A co-harmonic cyclotron resonance maser device for plasma applications

    Constable, D. A., Ronald, K., He, W., Phelps, A. D. R. & Cross, A. W., 12/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  74. Published

    A co-harmonic cyclotron resonant maser

    Constable, DA., 30/03/2009. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  75. Published

    A co-harmonic gyro-monotron with a novel corrugated interaction cavity

    Constable, DA., Ronald, K., Phelps, A. D. R., He, W., Cross, A. W., Savilov, A. V., Bratman, V. L., Bandurkin, I. V., McConville, S. L. & Konoplev, I. V., 26/02/2009, IET Conference on High Power RF Technologies. IET Press, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  76. Published

    A co-harmonic gyro-oscillator with a novel interaction cavity

    Constable, D. A., Ronald, K., Phelps, A. D. R., He, W., Cross, A. W., McConville, S. L., Konoplev, I. V., Bandurkin, I. V., Savilov, A. V. & Bratman, V. L., 2009, Vacuum Electronics Conference, 2009. IVEC '09. IEEE International. IEEE, p. 233-234 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  77. Published

    A combination of hybrid generator and battery system for frequency support

    Guo, R., Schofield, N. & Zhao, N., 29/08/2022, 11th International Conference on Power Electronics, Machines and Drives (PEMD 2022). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  78. Published

    A combined digital camera – EMT system to measure human body composition.

    Tapp, H. S., Goss, D., Mackin, R. O., Crescenzo, E., Wan-Daud, W. A., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 384-390 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  79. Published

    A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Castillo, P. E. J. R. D. D. & Zwaag, S. V. D., 04/2009, In: Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  80. Published

    A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging

    Pitman, S. & Hu, J., 11/2013, 2013 Loughborough Antennas & Propagation Conference. Loughborough, UK: IEEE, p. 534-538 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  81. Published

    A comparative approach to the economic modelling of a large-scale wave power scheme

    Stallard, T., Rothschild, R. & Aggidis, G., 2008, In: European Journal of Operational Research. 185, 2, p. 884-898 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  82. Published

    A comparative finite elemental analysis of glass abutment supported and unsupported cantilever fixed partial denture

    Ramakrishaniah, R., Al Kheraif, A. A., Elsharawy, M. A., Alsaleh, A. K., Ismail Mohamed, K. M. & Rehman, I. U., 2015, In: Dental Materials. 31, 5, p. 514-521 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  83. Published

    A comparative investigation on various platinum nanoparticles decorated carbon supports for oxygen reduction reaction

    Narasimulu, A. A., Singh, D. K., Soin, N., Gupta, G., Geng, J., Zhu, Z. & Luo, J. K., 30/04/2017, In: Current Nanoscience. 13, 2, p. 136-148 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Published

    A comparative production and characterisation of fast pyrolysis bio-oil from Populus and Spruce woods

    Echresh Zadeh, Z., Abdulkhani, A. & Saha, B., 1/01/2021, In: Energy. 214, 12 p., 118930.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    A comparative RANS/LES study of transient gas jets and sprays under diesel conditions

    Valentino, M., Jiang, X. & Zhao, H., 2007, In: Atomization and Sprays. 17, 5, p. 451-472 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Published

    A comparative structural characterisation of different lignin biomass

    Echresh, Z., Abdulkhani, A., Gadalla, M. & Saha, B., 23/06/2019, ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. p. 3167-3176 10 p. (ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  87. Published

    A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios

    Jeong, Y., Barlat, F., Tomé, C. N. & Wen, W., 1/06/2017, In: International Journal of Plasticity. 93, p. 212-228 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  88. Published

    A comparative study of different stable identification techniques using frequency domain subspace identification methods for a flexible plate

    Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 2011, p. 833-836. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  89. Published

    A Comparative Study of Diffusion Coefficients from Convective and IR Drying of Woodchip

    Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/11/2020, In: Journal of Fluid Flow, Heat and Mass Transfer. 7, p. 66-72 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published

    A comparative study of instabilities in forced reacting plumes of nonpremixed flames

    Jiang, J., Jing, L., Zhu, M. & Jiang, X., 08/2016, In: Journal of the Energy Institute. 89, 3, p. 456-467 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  91. Published

    A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders

    Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  92. Published

    A comparative study of melting behavior of phase change material with direct fluid contact and container inclination

    Khademi, A., Mehrjardi, S. A. A., Said, Z., Saidur, R., Ushak, S. & Chamkha, A. J., 30/06/2023, In: Energy Nexus. 10, 16 p., 100196.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  93. Published

    A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  94. Published

    A comparative study of psychological morbidity in women with screen detected and symptomatic breast cancer.

    Farmer, A., Payne, S. & Royle, G., 1995, Nursing research in cancer care. Richardson, A. & Wilson-Barnett, J. (eds.). London: Scutari Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  95. Published

    A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V

    Chen, H-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  96. Published

    A comparative study of wave energy technologies, public workshop: ‘making waves: the economic and social impacts of marine renewables.

    Aggidis, G. A., Bradshaw, A., French, M. J., McCabe, A. P., Meadowcroft, J. A. C. & Widden, M. B., 2005, Proceedings of the EPSRC SuperGen marine energy research consortium.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  97. Published

    A comparative study of wave energy technologies, public workshop: making waves: the economic and social impacts of marine renewables. (Invited paper)

    Aggidis, G. A., Stallard, T. J. & Rothschild, R., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  98. Published

    A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 2005, In: Applied Surface Science. 247, 1-4, p. 268-276 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  99. Published

    A comparative study on biodiesel production from waste cooking oils obtained from different sources using supercritical methanol

    Aboelazayem, O., Gadalla, M. & Saha, B., 5/09/2017, In: Journal of Bioremediation & Biodegradation. 8, 5, p. 56 1 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  100. Published

    A Comparative Study on Colloidal Nanosilica Incorporation in Polymer-Modified Cement Mortars

    Zabihi, N. & Özkul, M. H., 2018, International Congress on Polymers in Concrete. p. 675-681 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

Previous 1 2 3 4 5 6 7 8 ...61 Next

Back to top