Home > Research > Structures, Materials and Manufacturing > Publications & Outputs
View graph of relations

Structures, Materials and Manufacturing

  1. 2012
  2. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. Published

    Optimisation of Build Orientation for FDM Additive Manufactured Products

    Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  4. Published

    A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders

    Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, PJ., DeLemos, ACS., Tojeira, APO., Pereira, AMH., Mateus, AJ., Mendes, ALA., DosSantos, C., Freitas, DMF., Bartolo, HM., Almeida, HD., IM, D., Dias, JR., Domingos, MAN., Alves, NMF., Pereira, RFB., Patricio, TMF. & Ferreira, TMD. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Published

    A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction

    Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  6. Published

    A verified model of transient and residual stresses in laser direct metal deposition

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper 304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  7. Published

    Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis

    Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material

    Khan, M., Vogel, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P133

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  9. Published

    Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2012, In: Lasers in Engineering. 22, 5-6, p. 281-298 18 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Design and operation of a compact 1 MeV X-band Linac

    Burt, G., Ambattu, P., Lingwood, C., Abram, T., Burrows, I., Corlett, P., Goulden, A., Hartnett, T., Hindley, P., McIntosh, P. A., Middleman, K., Saveliev, Y., Smith, R. & White, C., 2012, Proceedings of LINAC2012, Tel-Aviv, Israel. p. 183-185 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  11. Published

    Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis

    Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    Guest Editorial: The 36th MATADOR Conference 2010

    Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.

    Research output: Contribution to Journal/MagazineEditorialpeer-review

  13. Published

    Modeling of a jig sampling and its application in disc cutter tools

    Yahaya, S. H., Sihombing, H., Yaakob, M. Y. & Hasib, H., 2012, In: Journal of Mechanical and Civil Engineering . 3, 2, p. 20-23 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    Multi-scale modeling of the progressive damage in cross-ply laminates under thermal and mechanical loading

    Yang, D., Sheng, Y. & Ye, J., 2012, In: IOP Conference Series: Materials Science and Engineering. 40, 1

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    p-i-n junction quantum dot saturable absorber mirror: electrical control of ultrafast dynamics

    Zolotovskaya, S., Butkus, M., Haring, R., Able, A., Kaenders, W., Krestnikov, I. L., Livshits, D. A. & Rafailov, E. U., 2012, In: Optics Express. 20, 8, p. 9038-9045 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    Progressive Collapse Evaluation of High Rise Steel Structures due to Sudden Loss of Structural Members

    Stephen, D., Ye, J. & Lam, D., 2012, Advances in steel concrete composite and hybrid structures : proceedings of the 10th International Conference on Steel Concrete Composite and Hybrid Structures, 2-4 July 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore: Research Publishing Services

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  17. Published

    Shape optimization of membrane structures based on finite element simulation

    Lim, C. W., Toropov, V. V. & Ye, J., 2012, Proceedings of the Eleventh International Conference on Computational Structures Technology. Topping, B. H. V. (ed.). Stirlingshire, United Kingdom: Civil-Comp press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  18. Published

    Static shape control using piezoelectric actuator

    Bhagate, K., Ye, J. & Singh, A., 2012, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures: Politecnico di Torino, 19-20 June 2012. Ferreira, A. J. M. & Carrera, E. (eds.). 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  19. 2011
  20. Published

    Visualization of water vapour flow in a packed bed adsorber by near-infrared diffused transmittance tomography

    tSaoir, M. N. A., Abreu Fernandes, D. L., Sa, J., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 15/12/2011, In: Chemical Engineering Science. 66, 24, p. 6407-6423 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  21. Published

    Electromagnetic NDT and condition monitoring - A personal view

    Ma, X., 21/11/2011, Proceedings of 2011 17th International Conference on Automation and Computing (ICAC’11): 10 Sept. 2011, Huddersfield, UK. IEEE, p. 266-271 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  22. Published

    Automated variation in product design: Using visual basics.net programming language to generate product variation

    Smith, P. & Rennie, A., 11/2011, Proceedings of the RAPDASA 2011 Conference. 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    Numerical investigation of powder heating in coaxial laser metal deposition

    Ibarra-Medina, J. & Pinkerton, A. J., 11/2011, In: Surface Engineering. 27, 10, p. 754-761 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Delivering Regional Eco-Innovation through Knowledge Exchange

    Lambert, C. & Rennie, A., 25/10/2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  25. Published

    Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate

    Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  26. Published

    Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints

    Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    Surface finishing techniques for SLM manufactured stainless steel 316L components

    Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  28. Published

    Variable fused deposition modelling: analysis of benefits, concept design and tool path generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  29. Published

    A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders

    Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  30. Published

    Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions

    Turvey, G., 6/09/2011, p. 470-481.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  31. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  33. Published

    Opportunities offered by additive manufacturing in creative businesses: informing designers

    Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  34. Published

    Dynamic simulation of crack initiation and propagation in cross-ply laminates by DEM

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 28/07/2011, In: Composites Science and Technology. 71, 11, p. 1410-1418 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Published

    An analytical-numerical model of laser direct metal deposition track and microstructure formation

    Ahsan, M. N. & Pinkerton, A. J., 07/2011, In: Modelling and Simulation in Materials Science and Engineering. 19, 5, p. - 22 p., 055003.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  36. Published

    Geometry Optimisation of Tools used in Milling of Spherical Surfaces

    Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  37. Published

    Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools

    Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  38. Published

    A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture

    Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  39. Published

    Additive manufacturing technologies and functional analysis used in product development optimization

    Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  40. Published

    Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips

    Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  41. Published

    Optimisation of build orientation for FDM additive manufactured products

    Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  42. Published

    Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs

    Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  43. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on

    Rennie, A. (ed.) & Bocking, C. E. (ed.), 06/2011, CRDM Ltd. 203 p.

    Research output: Book/Report/ProceedingsBook

  44. Published

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  45. Published

    Variable Fused Deposition Modelling – Concept Design and Tool Path Generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  46. Published

    Deformation behaviour simulation of an apple under drop case by finite element method

    Celik, H. K., Rennie, A. & Akinci, I., 05/2011, In: Journal of Food Engineering. 104, 2, p. 293-298 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  47. Published

    Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes

    Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 05/2011, In: Journal of Laser Applications. 23, 2, p. - 10 p., 022009.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  48. Published

    Online intelligent condition monitoring of electrical machines.

    Ma, X., 05/2011, p. 223-228. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  49. Published

    The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector

    Qureshi, J., Lam, D. & Ye, J., 05/2011, In: Engineering Structures. 33, 5, p. 1643-1656 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation

    Ahsan, M. N., Paul, C. P., Kukreja, L. M. & Pinkerton, A. J., 1/04/2011, In: Journal of Materials Processing Technology. 211, 4, p. 602-609 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 04/2011, In: International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME). 1, 2, p. 1-18 18 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  52. Published

    Effect of shear connector spacing and layout on the shear connector capacity in composite beams

    Qureshi, J., Lam, D. & Ye, J., 04/2011, In: Journal of Constructional Steel Research. 67, 4, p. 706-719 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  53. Published

    Second-harmonic conical refraction: observation of free and forced harmonic waves

    Zolotovskaya, S., Abdolvand, A., Kalkandjiev, T. K. & Rafailov, E. U., 04/2011, In: Applied Physics B. 103, 1, p. 9-12 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  54. Published

    Residual stresses in laser direct metal deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 15/03/2011, In: Materials Science and Engineering: A. 528, 6, p. 2288-2298 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  55. Published

    Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  56. Published

    Screening wall effects of a thin fluidized bed by near-infrared imaging

    Aiouache, F., tSaoir, M. N. A. & Kitagawa, K., 15/02/2011, In: Chemical Engineering Journal. 167, 1, p. 288-296 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  57. Published

    Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications

    Chen, H-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  58. Published

    Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points

    Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In: Computational Materials Science. 50, 4, p. 1292–1298 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications

    Chen, H-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. Published

    Innovative reconsolidation of carbon steel machining swarf by laser metal deposition

    Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 02/2011, In: Optics and Lasers in Engineering. 49, 2, p. 240-247 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  61. Published

    Modeling progressive delamination of laminated composites by discrete element method

    Yang, D., Ye, J., Tan, Y. & Sheng, Y., 01/2011, In: Computational Materials Science. 50, 3, p. 858-864 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  62. Published

    Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure

    Hou, X., Acar, M. & Silberschmidt, V., 01/2011, In: Journal of Materials Science. 46, 2, p. 307–315 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  63. Published

    A CFD model of laser cladding: From deposition head to melt pool dynamics

    Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  64. Published

    An integrated model of laser clad formation using CFD and FE methods

    Vogel, M., Ibarra-Medina, J., N'Dri, N. & Pinkerton, A. J., 2011, Surface modification technologies XXV : Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. & Nylen, P. (eds.). India: Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  65. Published

    Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites

    Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  66. Published

    Buckling behaviour of concrete- filled elliptical steel columns

    Lam, D., Dai, X., Jamaluddin, N. & Ye, J., 2011, 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia. Ho, L. H. (ed.).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  67. Published

    Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility.

    Lam, D., Qureshi, J. & Ye, J., 2011, 5th International Conference on Steel & Composite Structures, Seoul, Korea..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  68. Published

    Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns

    Lam, D., Dai, X., Ye, J. & Jamaluddin, N., 2011, EUROSTEEL 2011, Budapest, Hungary. .

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  69. Published

    Laser metal deposition of steel components using machining waste as build material

    Mahmood, K., Khan, A. & Pinkerton, A. J., 2011, Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. New York: IEEE, p. - 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  70. Published

    Laser surface cladding of Inconel 617 chips on mild steel

    Mahmood, K., Pinkerton, A. J. & Syed, W. U. H., 2011, Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  71. Published

    Material-efficient laser cladding for corrosion resistance

    Mahmood, K., Stevens, N., Syed, W. U. H. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 695-704 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  72. Published

    Multi-scale modelling of damage progression in FRC laminates - Applications of DEM

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 2011, Particle-Based Methods II: Fundamentals and Applications. Onate, E. & Owen, D. R. J. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 256-263 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  73. Published

    Nonlinear compression behavior of warp-knitted spacer fabric: effect of sandwich structure

    Hou, X., Hu, H., Liu, Y. & Silberschmidt, V., 2011, In: Computers, Materials & Continua. 23, 2, p. 119-134 16 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  74. Published

    Numerical Modelling of Damage Progression in Single-fiber Composite under Axial Tension

    Yang, D., Sheng, Y., Ye, J., Tan, Y. & Jiang, S., 2011, In: Advanced Materials Research. 268-270, p. 280-285 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  75. Published

    Product Optimization by Rapid Manufacturing and Targeted Functional Analysis

    Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  76. Published

    Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model

    Gu, J., Feng, Z., Ma, X. & Ni, J., 2011, In: Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  77. Published

    Realistic Modeling of High Rise Structures subjected to Progressive Collapse

    Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  78. Published
  79. 2010
  80. Unpublished

    Analysis and verification of fuel exhaust emissions.

    Ma, X., 2/12/2010, (Unpublished) 12 p.

    Research output: Working paper

  81. Published

    Computer aided material selection for additive manufacturing materials

    Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  82. Published

    Rapid design, prototyping and manufacturing

    Rennie, A., Aitchison, D. (ed.) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.

    Research output: Contribution to Journal/MagazineEditorial

  83. Published

    Microstructure effects on transverse cracking in composite laminae by DEM

    Sheng, Y., Yang, D., Tan, Y. & Ye, J., 30/11/2010, In: Composites Science and Technology. 70, 14, p. 2093-2101 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Published

    Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine

    Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    Feature detection and monitoring of eddy current imaging data by means of wavelet based singularity analysis.

    Ma, X. & Peyton, A. J., 11/2010, In: NDT and E International. 43, 8, p. 687-694 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Unpublished
  87. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  88. Published

    Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams

    Turvey, G., 7/09/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  89. Published

    Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA

    Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  90. Published

    Skills development of employees at SMEs in the construction sector in the North of England

    Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  91. Published

    Structural optimisation of a subsoiler

    Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  92. Published

    Use of FDM in an undergraduate student project: design, build and test a model wind turbine

    Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  93. Published

    Discrete element modeling of the microbond test of fiber reinforced composite

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 08/2010, In: Computational Materials Science. 49, 2, p. 253-259 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  94. Published

    Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry

    Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  95. Published

    A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  96. Published

    Using additive manufacturing effectively: a CAD tool to support decision making

    Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  97. Published

    A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.

    Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  98. Published

    Analysis of existing Additive manufacturing material selectors

    Hambali, R. H. & Rennie, A., 06/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  99. Published

    Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials

    Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  100. Published

    Fire responses and resistance of concrete-filled steel tubular frame structures

    Yu, M., Zha, X., Ye, J. & Li, Y., 06/2010, In: International Journal of Structural Stability and Dynamics. 10, 2, p. 253-271 19 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  101. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  102. Published

    A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & She, C., 04/2010, In: Engineering Structures. 32, 4, p. 1046-1053 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  103. Published

    Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine

    Topakci, M., Celik, H. K., Canakci, M., Rennie, A., Akinci, I. & Karayel, D., 04/2010, In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Back to top