Andrew Kennedy - Publications & Outputs - Research Portal

Professor Andrew Kennedy

Chair in Advanced Manufacturing, Head of Department

1 - 25 out of 46Page size: 25

RSS feed of this list

Sort by: Title

Published
A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting
Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel method for the manufacture of porous structures with multi-component, coated pores
Siddiq, A. R. & Kennedy, A. R., 1/06/2017, In: Materials Letters. 196, p. 324-327 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills
Butler-Smith, P. W., Axinte, D. A., Daine, M., Kennedy, A. R., Harper, L. T., Bucourt, J. F. & Ragueneau, R., 01/2015, In: International Journal of Machine Tools and Manufacture. 88, p. 175-183 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A water-soluble core material for manufacturing hollow composite sections
Xiao, Z., Harper, L. T., Kennedy, A. R. & Warrior, N. A., 15/12/2017, In: Composite Structures. 182, p. 380-390 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Airflow measurement across negatively infiltration processed porous aluminum structures
Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/04/2019, In: AIChE Journal. 65, 4, p. 1355-1364 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Al-TiC composite made by the addition of master alloys pellets synthesised from reacted elemental powders
Selcuk, C. & Kennedy, A. R., 1/12/2006, In: Materials Letters. 60, 28, p. 3364-3366 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Assessing the potential for multi-functional textquotedbllefthybridtextquotedblright porous Al-phase change material structures
Kennedy, A. R., 15/12/2016, In: Materials Letters. 185, p. 339-341 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Boosting visual servoing performance through RGB-based methods
Fei, H., Wang, Z., Tedeschi, S. & Kennedy, A., 21/08/2023, In: Robotic Intelligence and Automation. 43, 4, p. 468-475 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cold sprayed metal-ceramic coatings using satellited powders
Al-Hamdani, K. S., Murray, J. W., Hussain, T., Kennedy, A. & Clare, A. T., 1/07/2017, In: Materials Letters. 198, p. 184-187 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Compression moulding and injection over moulding of porous PEEK components
Siddiq, A. & Kennedy, A. R., 1/11/2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 10 p., 103996.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Data-driven Process Parameter Optimisation for Laser Wire Metal Additive Manufacturing
Roberts, M., Xia, M. & Kennedy, A., 10/10/2022, Proceedings of the 27th International Conference on Automation & Computing. IEEE, p. 1-6 6 p. 124
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Development of metal matrix composites by direct energy deposition of ‘satellited’ powders
Farayibi, P. K., Abioye, T. E., Kennedy, A. & Clare, A. T., 1/09/2019, In: Journal of Manufacturing Processes. 45, p. 429-437 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Discrete element modelling of flexible fibre packing
Langston, P., Kennedy, A. R. & Constantin, H., 01/2015, In: Computational Materials Science. 96, A, p. 108-116 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Discrete element modelling of the packing of spheres and its application to the structure of porous metals made by infiltration of packed beds of NaCl beads
Langston, P. & Kennedy, A. R., 1/12/2014, In: Powder Technology. 268, p. 210-218 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Magnesium Addition on the Cell Structure of Foams Produced From Re-melted Aluminum Alloy Scrap
Vinod-Kumar, G. S., Heim, K., Jerry, J., Garcia-Moreno, F., Kennedy, A. R. & Banhart, J., 1/10/2017, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 5, p. 2551-2563 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of solidification rate on pore connectivity of aluminium foams and its consequences on mechanical properties
Lázaro, J., Solórzano, E., Rodríguez-Perez, M. A. & Kennedy, A. R., 30/08/2016, In: Materials Science and Engineering: A. 672, p. 236-246 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of the Material Extrusion Process Parameters on the Compressive Properties of Additively Manufactured Foamed and Nonfoamed Polylactic Acid Structures
Yousefi Kanani, A. & Kennedy, A., 1/02/2024, In: 3D Printing and Additive Manufacturing. 11, 1, p. 207-218 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns
Shah, A. A., Shahid, M., Hardy, J. G., Siddiqui, N. A., Kennedy, A. R., Gul, I. H., Rehman, S. U. & Nawab, Y., 27/05/2022, In: Crystals. 12, 6, 16 p., e781.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electron beam weld penetration depth prediction improved by beam characterisation
Yin, Y., Kennedy, A., Mitchell, T., Sieczkiewicz, N., Jefimovs, V. & Tian, Y., 31/03/2023, In: International Journal of Advanced Manufacturing Technology. 125, 1-2, p. 399-415 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and numerical analysis of additively manufactured foamed sandwich beams
Yousefi Kanani, A. & Kennedy, A., 15/05/2023, In: Composite Structures. 312, 9 p., 116866.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and tomography-based CFD investigations of the flow in open cell metal foams with application to aero engine separators
De Carvalho, T. P., Morvan, H. P., Hargreaves, D., Oun, H. & Kennedy, A., 2015, Heat Transfer. American Society of Mechanical Engineers (ASME), Vol. 5C. 11 p. GT2015-43509
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Experimental investigation of pressure-drop characteristics across multi-layer porous metal structures
Oun, H. & Kennedy, A. R., 12/2014, In: Journal of Porous Materials. 21, 6, p. 1133-1141 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fault diagnosis of a rotor-bearing system under variable rotating speeds using two-stage parameter transfer and infrared thermal images
Shao, H., Li, W., Xia, M., Zhang, Y., Shen, C., Williams, D., Kennedy, A. & De Silva, C. W., 10/09/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock
Aboulkhair, N. T., Zhao, G., Hague, R. J. M., Kennedy, A. R., Ashcroft, I. A. & Clare, A. T., 1/07/2020, In: Journal of Manufacturing Processes. 55, p. 249-253 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration
Patel, U., Macri-Pellizzeri, L., Zakir Hossain, K. M., Scammell, B. E., Grant, D. M., Scotchford, C. A., Hannon, A. C., Kennedy, A. R., Barney, E. R., Ahmed, I. & Sottile, V., 1/03/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 396-405 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 Next

Research

Professor Andrew Kennedy

A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting

A novel method for the manufacture of porous structures with multi-component, coated pores

A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills

A water-soluble core material for manufacturing hollow composite sections

Airflow measurement across negatively infiltration processed porous aluminum structures

Al-TiC composite made by the addition of master alloys pellets synthesised from reacted elemental powders

Assessing the potential for multi-functional textquotedbllefthybridtextquotedblright porous Al-phase change material structures

Boosting visual servoing performance through RGB-based methods

Cold sprayed metal-ceramic coatings using satellited powders

Compression moulding and injection over moulding of porous PEEK components

Data-driven Process Parameter Optimisation for Laser Wire Metal Additive Manufacturing

Development of metal matrix composites by direct energy deposition of ‘satellited’ powders

Discrete element modelling of flexible fibre packing

Discrete element modelling of the packing of spheres and its application to the structure of porous metals made by infiltration of packed beds of NaCl beads

Effect of Magnesium Addition on the Cell Structure of Foams Produced From Re-melted Aluminum Alloy Scrap

Effect of solidification rate on pore connectivity of aluminium foams and its consequences on mechanical properties

Effect of the Material Extrusion Process Parameters on the Compressive Properties of Additively Manufactured Foamed and Nonfoamed Polylactic Acid Structures

Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns

Electron beam weld penetration depth prediction improved by beam characterisation

Experimental and numerical analysis of additively manufactured foamed sandwich beams

Experimental and tomography-based CFD investigations of the flow in open cell metal foams with application to aero engine separators

Experimental investigation of pressure-drop characteristics across multi-layer porous metal structures

Fault diagnosis of a rotor-bearing system under variable rotating speeds using two-stage parameter transfer and infrared thermal images

Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock

In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration

Quick Links

Connect With Us

Faculties & Depts

Contact Us