Home > Research > Researchers > Professor James Taylor > Publications

Professor James Taylor PhD, FIET

Professor of Control Engineering

  1. 2021
  2. Published

    COTS vision system, radiation sensor and 6 DoF robot for use in identifying radiologically uncharacterised objects

    Monk, S., Cheneler, D., West, C., Bandala Sanchez, M., Montazeri, A., Dixon, N. & Taylor, C. J., 21/01/2021, 2020 Australian and New Zealand Control Conference (ANZCC). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  3. Published

    Unknown and time-varying time delays in the modelling and control of hydraulic actuators: literature review

    Albrecht, O. & Taylor, C. J., 21/01/2021, 2020 Australian and New Zealand Control Conference (ANZCC). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  4. Published

    A prototype telepresence robot for use in the investigation of ebola and lassa virus threatened villages in Nigeria

    Monk, S., Jorgensen, E., McCulloch, A., Peacock, R., Sangprachatanaruk, I., Azeta, J., Bolu, C. A. & Taylor, C. J., 7/01/2021, Proceedings of the 27th International Conference on Systems Engineering, ICSEng 2020. Selvaraj, H., Chmaj, G. & Zydek, D. (eds.). Springer, p. 34-48 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. 2020
  6. Published

    Reduced chatter sliding mode control for hydraulic manipulators based on continuous–time state dependent parameter models

    Nemati, H., Bandala Sanchez, M., Albrecht, O. & Taylor, C. J., 27/11/2020, 4th Australian and New Zealand Control Conference (ANZCC). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  7. Published

    Action conditional recurrent Kalman networks for forward and inverse dynamics learning

    Shaj, V., Becker, P., Buchler, D., Pandya, H., van Duijkeren, N., Taylor, C. J., Hanheide, M. & Neumann, G., 18/11/2020, Proceedings of Machine Learning Research.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  8. Published

    Optimal power flow solution with uncertain RES using augmented grey wolf optimization

    Khan, I. U., Javaid, N., Akurugoda Gamage, K., Taylor, C. J. & Ma, X., 2/11/2020, 2020 IEEE International Conference on Power Systems Technology (POWERCON). IEEE, 6 p. (IEEE International Conference on Power Systems Technology (POWERCON)).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  9. Published

    Plant leaf position estimation with computer vision

    Beadle, J., Taylor, C. J., Ashworth, K. & Cheneler, D., 20/10/2020, In: Sensors. 20, 20, 16 p., 5933.

    Research output: Contribution to journalJournal articlepeer-review

  10. Published

    Heuristic algorithm based optimal power flow model incorporating stochastic renewable energy sources

    Khan, I. U., Javaid, N., Akurugoda Gamage, K., Taylor, C. J., Baig, S. & Ma, X., 14/08/2020, In: IEEE Access. 8, p. 148622-148643 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Big data analytics based short term electricity load forecasting model for residential buildings in smart grids

    Khan, I. U., Javaid, N., Taylor, C. J., Gamage, K. A. A. & Ma, X., 10/08/2020, IEEE INFOCOM 2020 - IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS). IEEE, p. 544-549 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  12. Published

    Robust and adaptive anticoagulant control

    Avery, P., Clairon, Q., Henderson, R., Taylor, C. J. & Wilson, E., 1/06/2020, In: Journal of the Royal Statistical Society: Series C (Applied Statistics). 69, 3, p. 503-524 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    Control of hydraulically–actuated manipulators with dead–band and time–delay uncertainties

    Albrecht, O., Bandala Sanchez, M., Monk, S. & Taylor, J., 17/04/2020, p. 54-55. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  14. E-pub ahead of print

    Adaptive treatment and robust control

    Clairon, Q., Henderson, R., Young, N., Wilson, E. & Taylor, C. J., 6/04/2020, In: Biometrics. 0, p. 0-0 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  15. 2019
  16. Published

    Eigenvalue analysis and case study examples of fractional order generalised predictive control

    Alarfaj, Y. & Taylor, C. J., 11/11/2019, 25th IEEE International Conference on Automation and Computing (ICAC). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  17. Published

    A thermal-electrical analogy model of a four-floor building with occupancy estimation for heating system control

    Tate, O., Cheneler, D. & Taylor, C. J., 29/10/2019, In: IFAC-PapersOnLine. 52, 11, p. 91-96 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  18. Published

    Fast, vision-based line-following schemes for micro-aerial vehicles in nuclear environments

    Nemati, H., Goki, S. H. M., Yazdanshenas, A. & Taylor, J., 27/10/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  19. Published

    A dual-arm, hydraulically-actuated robot for operations within radiological environments

    Albrecht, O., Monk, S. D., Bandala Sanchez, M., Montazeri, A. & Taylor, J., 1/10/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  20. Published

    Simplified models for heating system optimisation using a thermal-electrical analogy

    Tate, O., Cheneler, D. & Taylor, C. J., 7/09/2019, 25th IEEE International Conference on Automation and Computing (ICAC). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    Robustness evaluation and robust design for Proportional-Integral-Plus control

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 1/09/2019, In: International Journal of Control. 92, 12, p. 2939-2951 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  22. Published

    Pulse shape discrimination performance of a pixelated plastic scintillator (EJ-299-34) for a coded-aperture based dual particle imaging system

    Cieslak, M., Akurugoda Gamage, K., Glover, R. & Taylor, C. J., 31/07/2019, In: Journal of Instrumentation. 14, 16 p., P07017.

    Research output: Contribution to journalJournal articlepeer-review

  23. Published

    Compact viscometer prototype for remote in-situ analysis of sludge

    Fried, T., Cheneler, D., Monk, S. D., Taylor, C. J. & Dodds, J., 26/07/2019, In: Sensors. 19, 15, 14 p., 3299.

    Research output: Contribution to journalJournal articlepeer-review

  24. Published

    Heuristic algorithm based dynamic scheduling model of home appliances in smart grid

    Khan, I. U., Ma, X., Taylor, C. J., Javaid, N. & Gamage, K., 1/07/2019, 24th International Conference on Automation and Computing. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  25. Published
  26. Published

    Study of modulation properties of tungsten based coded-aperture

    Cieslak, M., Gamage, K. A. A. & Taylor, C. J., 14/06/2019, p. 242. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  27. Published

    Recurrent Kalman networks: factorized inference in high-dimensional deep feature spaces

    Becker, P., Pandya, H., Gebhardt, G., Zhao, C., Taylor, C. J. & Neumann, G., 13/06/2019, Proceedings of Machine Learning Research (PMLR). Vol. 97. p. 544-552 9 p. (Proceedings of Machine Learning Research (PMLR); vol. 97).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  28. Published
  29. Published

    A review of ground-based robotic systems for the characterization of nuclear environments

    Tsitsimpelis, I., Taylor, C. J., Lennox, B. & Joyce, M. J., 1/03/2019, In: Progress in Nuclear Energy. 111, p. 109-124 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  30. Published

    Gamma-ray modulation properties of tungsten coded apertures for a novel mixed-field imaging system

    Cieslak, M., Akurugoda Gamage, K., Glover, R. & Taylor, C. J., 8/02/2019, In: Journal of Instrumentation. 14, 15 p., P02007.

    Research output: Contribution to journalJournal articlepeer-review

  31. Published

    In Situ Mechanical Analysis of Sludge in Hazardous Environments

    Fried, T., Cheneler, D., Monk, S. D., Taylor, C. J. & Dodds, J., 2019.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  32. 2018
  33. Published

    Model predictive and proportional integral control of blood clotting speed using warfarin when data are missing

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 29/10/2018, 18th IEEE International Conference on Bioinformatics and Bioengineering. IEEE, p. 22-27 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  34. Published

    Stochastic non-minimal state space control with application to automated drug delivery

    Wilson, E. D., Clairon, Q. & Taylor, C. J., 29/10/2018, 2018 18th IEEE International Conference on Bioinformatics and Bioengineering. IEEE, p. 28-34 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    A vision-based positioning system with inverse dead-zone control for dual-hydraulic manipulators

    West, C., Monk, S. D., Montazeri, A. & Taylor, C. J., 5/09/2018, 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, p. 379-384 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  36. Published

    Towards a Cooperative Robotic System for Autonomous Pipe Cutting in Nuclear Decommissioning

    Burrell, T. I., West, C., Monk, S. D., Montazeri, A. & Taylor, C. J., 5/09/2018, 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, p. 283-288 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  37. Published

    Alpha particle detection using alpha-induced air radioluminescence: a review and future prospects for preliminary radiological characterisation for nuclear facilities decommissioning

    Crompton, A., Gamage, K. A. A., Jenkins, A. & Taylor, C. J., 28/03/2018, In: Sensors. 18, 4, 23 p.

    Research output: Contribution to journalJournal articlepeer-review

  38. Published

    Non-minimal state space polynomial form of the Kalman filter for a general noise model

    Wilson, E. D., Clairon, Q. & Taylor, C. J., 27/02/2018, In: Electronics Letters. 54, 4, p. 204-206 3 p.

    Research output: Contribution to journalLetterpeer-review

  39. Published

    Computational Fluid Dynamics and Data-Based Mechanistic Modelling of a Forced Ventilation Chamber

    Tate, O., Wilson, E. D., Cheneler, D. & Taylor, C. J., 2018, In: IFAC-PapersOnLine. 51, 15, p. 263-268 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  40. Published

    Dealing with observational data in control

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 2018, In: Annual Reviews in Control. 46, p. 94-106 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  41. Published

    Models for heating system optimisation

    Tate, O., Cheneler, D. & Taylor, C. J., 2018.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  42. Published

    New developments in the CAPTAIN Toolbox for Matlab with case study examples

    Taylor, C. J., Young, P. C., Tych, W. & Wilson, E. D., 2018, In: IFAC-PapersOnLine. 51, 15, p. 694-699 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  43. Published

    State-dependent parameter model identification for inverse dead-zone control of a hydraulic manipulator

    West, C., Wilson, E. D., Clairon, Q., Monk, S. D., Montazeri, A. & Taylor, C. J., 2018, In: IFAC-PapersOnLine. 51, 15, p. 126-131 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  44. 2017
  45. Published

    A new approach to improve the parameter estimation accuracy in robotic manipulators using a multi-objective output error identification technique

    West, C., Montazeri, A., Monk, S. D., Duda, D. & Taylor, C. J., 14/12/2017, 26th IEEE International Symposium on Robot and Human Interactive Communication, Lisbon. IEEE, p. 1406-1411 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  46. Published

    Modeling and analysis of secondary sources coupling for active sound field reduction in confined spaces

    Montazeri, A. & Taylor, C. J., 10/2017, In: Mechanical Systems and Signal Processing. 95, p. 286-309 24 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published
  48. Published

    Adaptive biomedical treatment and robust control

    Clairon, Q., Wilson, E. D., Henderson, R. & Taylor, C. J., 07/2017, In: IFAC-PapersOnLine. 50, 1, p. 12191-12196 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    Overview of wave energy converter devices and the development of a new multi-axis laboratory prototype

    Aggidis, G. A. & Taylor, C. J., 07/2017, In: IFAC-PapersOnLine. 50, 1, p. 15651-15656 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  50. Published

    The CAPTAIN Toolbox for System Identification, Time Series Analysis, Forecasting and Control: Getting Started Guide

    Taylor, C. J., 27/06/2017, Lancaster University.

    Research output: Book/Report/ProceedingsOther report

  51. Published

    The Microphenotron: a robotic miniaturized plant phenotyping platform with diverse applications in chemical biology

    Burrell, T. I., Fozard, S., Holroyd, G. H., French, A. P., Pound, M. P., Bigley, C., Taylor, C. J. & Forde, B. G., 1/03/2017, In: Plant Methods. 13, 20 p., 10.

    Research output: Contribution to journalJournal articlepeer-review

  52. 2016
  53. Published

    Development of a grow-cell test facility for research into sustainable controlled-environment agriculture

    Tsitsimpelis, I., Wolfenden, I. & Taylor, C. J., 10/2016, In: Biosystems Engineering. 150, p. 40-53 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  54. Published

    Dynamic modeling and parameter estimation of a hydraulic robot manipulator using a multi-objective genetic algorithm

    Montazeri, A., West, C., Monk, S. D. & Taylor, C. J., 21/09/2016, In: International Journal of Control. 90, 4, p. 661-683 23 p.

    Research output: Contribution to journalJournal articlepeer-review

  55. Published

    Feedback control-based inverse kinematics solvers for a nuclear decommissioning robot

    Burrell, T. I., Montazeri, A., Monk, S. D. & Taylor, C. J., 5/09/2016, MECHATRONICS 2016: 7th IFAC Symposium on Mechatronic Systems & 15th Mechatronics Forum International Conference Loughborough University 5th - 8th September 2016.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  56. Published

    Model development and energy management control for hybrid electric race vehicles

    Reeves, K., Montazeri, A. & Taylor, C. J., 31/08/2016, 2016 UKACC 11th International Conference on Control (CONTROL). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  57. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 28/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  58. Published

    Validation of a hybrid electric vehicle dynamics model for energy management and vehicle stability control

    Reeves, K., Montazeri, A. & Taylor, C. J., 8/06/2016, Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on. IEEE, p. 849-854 6 p. (Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  59. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 2016, In: IFAC-PapersOnLine. 49, 12, p. 1261-1266 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  60. 2015
  61. Published

    Partitioning of indoor airspace for multi-zone thermal modelling using hierarchical cluster analysis

    Tsitsimpelis, I. & Taylor, C. J., 15/07/2015, 14th European Control Conference. IEEE, p. 410-415 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  62. Published

    Combined pole assignment and mean value engine model multivariable decoupling control

    Titi, S. & Taylor, C. J., 2015, In: Transactions of the Institute of Measurement and Control. 37, 1, p. 40-49 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Research and teaching using a hydraulically-actuated nuclear decommissioning robot

    West, C., Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  64. Published

    Review of autonomous navigation for indoor aerial robots within a nuclear decommissioning context

    Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  65. 2014
  66. Published

    A 2–dimensional Hammerstein model for heating and ventilation control of conceptual thermal zones

    Tsitsimpelis, I. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  67. Published

    Exact linearization by feedback of state dependent parameter models applied to a mechatronics demonstrator

    Shaban, E. M., Nada, A. A. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  68. Published

    Inverse kinematics for a redundant robotic manipulator used for nuclear decommissioning

    Besset, P. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  69. Published

    Modelling seasonal and multi annual variation in bank vole populations and nephropathia epidemica

    Haredasht, S. A., Taylor, C. J., Maes, P., Verstraeten, W. W., Clement, J., Van Ranst, M., Coppin, P., Berckmans, D. & Aerts, J-M., 05/2014, In: Biosystems Engineering. 121, p. 25–37 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  70. Published

    Control of nonlinear biological systems by non–minimal state variable feedback

    Taylor, C. J. & Aerts, J-M., 2014, In: Statistics in Biosciences. 6, 2, p. 290-313 24 p.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    Micro–climate control in a grow–cell: system development and overview

    Tsitsimpelis, I. & Taylor, C. J., 2014, International Federation of Automatic Control 19th Triennial World Congress. Cape Town, South Africa, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  72. 2013
  73. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Taylor, C. J. & Robertson, D., 12/2013, In: Control Engineering Practice. 21, 12, p. 1716-1725 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  74. Published

    True digital control: statistical modelling and non–minimal state space design

    Taylor, C. J., Young, P. & Chotai, A., 08/2013, Chichester: John Wiley & Sons, Ltd. 360 p.

    Research output: Book/Report/ProceedingsBook

  75. Published

    Dynamic data–based modelling of synaptic plasticity: mGluR–dependent long–term depression

    Tambuyzer, T., Ahmed, T., Taylor, C. J., Berckmans, D., D., B. & Aerts, J-M., 02/2013, 6th International Conference on Bio–inspired Systems and Signal Processing. p. 48-53 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  76. Published

    Model–based prediction of nephropathia epidemica outbreaks based on climatologic and vegetation data and bank voles population dynamics

    Haredasht, S. A., Taylor, C. J., Maes, P., Verstraeten, W. W., Clement, J., Barrios, M., Lagrou, K., Van Ranst, M., Coppin, P., Berckmans, D. & Aerts, J-M., 2013, In: Zoonoses and Public Health. 60, 7, p. 462-477 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  77. Published

    System identification of metabotropic glutamate receptor dependent long–term depression

    Tambuyzer, T., Ahmed, T., Berckmans, D., Taylor, C. J., Balschun, D. & Aerts, J-M., 2013, In: Neural Computation. 25, 3, p. 650-670 21 p.

    Research output: Contribution to journalJournal articlepeer-review

  78. 2012
  79. Published

    Linear and nonlinear non-minimal state space control system design.

    Taylor, C. J., Chotai, A. & Tych, W., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 559-582 24 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  80. Published

    Low-level joint control of a robotic manipulator using state-dependent parameter models

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  81. Published

    Multi-state dependent parameter model identification and estimation

    Tych, W., Sadeghi, J., Smith, P. J., Chotai, A. & Taylor, C. J., 2012, System Identification, Environmental Modelling, and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 191-210 20 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  82. Published

    Non–minimal state variable feedback decoupling control for multivariable continuous–time systems

    Taylor, J., Chotai, A. & Cross, P., 2012, In: International Journal of Control. 85, 6, p. 722-734 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  83. Published

    Practical experience with unified discrete and continuous–time, multi–input identification for control system design

    Taylor, C. J., Young, P. & Cross, P., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  84. Published

    Recent developments in the CAPTAIN Toolbox for Matlab

    Young, P. & Taylor, C. J., 2012, 16th IFAC Symposium on System Identification . Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  85. Published

    SSpace: A flexible and general state space toolbox for MATLAB.

    Taylor, C. J. & Pedregal, D. J., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 615-636 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  86. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  87. Published

    State-dependent system identification for control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D., Taylor, C. J. & Lokuciewski, C., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  88. 2011
  89. Published

    Challenges in oil and gas subsea production systems: Control, monitoring and reliability - an introduction

    Theobald, M., Taylor, C. J. & Burnham, K. J., 07/2011, In: Measurement and Control. 44, 7, p. 206-207 2 p.

    Research output: Contribution to journalEditorialpeer-review

  90. Published

    Controllable forms for stabilising pole assignment design of generalised bilinear systems

    Taylor, C. J., Chotai, A. & Burnham, K. J., 31/03/2011, In: Electronics Letters. 47, 7, p. 437-439 3 p.

    Research output: Contribution to journalLetterpeer-review

  91. Published

    An Independent Validation of the Optimality of Latching and De-clutching Control by Evolutionary Methods.

    Gunn, K. J., Taylor, C. J. & Lingwood, C. J., 2011, 9th European Wave and Tidal Energy Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  92. Published

    State dependent feed-forward control for wave energy conversion

    Cross, P., Taylor, J. & Aggidis, G., 2011, 9th European Wave and Tidal Energy Conference. EWTEC

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  93. 2010
  94. Published

    State dependent control of a robotic manipulator used for nuclear decommissioning activities.

    Taylor, C. J., Chotai, A. & Robertson, D., 10/2010, IEEE RSJ International Conference on Intelligent Robots and Systems IROS 2010. Taipei, Taiwan, p. 2413-2418 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  95. Published

    Captain toolbox analysis of the hyperfast switching peltier cooling system benchmark.

    Taylor, C. J. & Young, P. C., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 1082-1087 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  96. Published

    Continuous-time feed-forward proportional-integral-plus control.

    Cross, P., Taylor, C. J. & Aggidis, G. A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 229-234 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  97. Published

    Multi-objective evolutionary optimisation of the geometry of a class of controlled wave energy converter.

    Gunn, K., Lingwood, C. & Taylor, C. J., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 349-354 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  98. Published

    Nonlinear control by input-output pole assignment: state space derivation.

    Taylor, C. J. & Chotai, A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 1076-1081 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  99. Published

    Control of a dual-arm robotic manipulator

    Taylor, C. J. & Seward, D., 08/2010, In: Nuclear Engineering International. 55, 673, p. 24-26 3 p.

    Research output: Contribution to journalJournal article

  100. Published

    Multi-objective performance optimisation for model predictive control by goal attainment

    Exadaktylos, V. & Taylor, C. J., 2010, In: International Journal of Control. 83, 7, p. 1374-1386 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  101. Published

    The Captain Toolbox

    Young, P. C., Taylor, C. J., Tych, W., Pedregal, D. J. & McKenna, P. G., 2010

    Research output: Exhibits, objects and web-based outputsSoftware

  102. 2009
  103. Published

    Nonlinear control by input-output state variable feedback pole assignment

    Taylor, C. J., Chotai, A. & Young, P. C., 06/2009, In: International Journal of Control. 82, 6, p. 1029-1044 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  104. Published

    Non-minimal state space model-based continuous-time model predictive control with constraints

    Wang, L., Young, P. C., Gawthrop, P. & Taylor, C. J., 06/2009, In: International Journal of Control. 82, 6, p. 1122-1137 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  105. Published

    Stabilizing global mean surface temperature: a feedback control perspective

    Jarvis, A., Leedal, D., Taylor, J. & Young, P., 05/2009, In: Environmental Modelling and Software. 24, 5, p. 665-674 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  106. Published

    An interactive PC-based electrical power system simulator for engineering education.

    Ma, X., Taylor, C. J. & Joyce, M. J., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  107. Published

    Evolutionary algorithms for the development and optimisation of wave energy converter control systems.

    Gunn, K., Taylor, C. J. & Lingwood, C., 2009, 8th European Wave and Tidal Energy Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  108. Published

    Feed-forward control of a nonlinear power take-off simulation for wave energy conversion.

    Cross, P., Taylor, C. J. & Aggidis, A., 2009, 20th International Conference on Systems Engineering.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  109. Published

    Forward path model predictive control using a non-minimal state space form

    Exadaktylos, V., Taylor, C. J., Wang, L. & Young, P. C., 2009, In: Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering. 223, 3, p. 353-369 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  110. Published

    Linear and nonlinear control of a power take-off simulation for wave energy conversion.

    Taylor, C. J., Stables, M. A., Cross, P., Gunn, K. & Aggidis, G. A., 2009, 8th European Wave and Tidal Energy Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  111. Published

    State dependent ramp metering control of motorway bottlenecks using non-linear pole assignment.

    Taylor, C. J. & Chotai, A., 2009, 12th IFAC Symposium on Control in Transportation Systems.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  112. Published

    The Captain Toolbox for Matlab

    Young, P., Tych, W. & Taylor, J., 2009, p. 758-763. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  113. Published
Previous 1 2 Next

Back to top