Home > Research > Researchers > Professor Mark Stevenson > Publications

Professor Mark Stevenson

Professor of Operations Management

  1. Chapter
  2. Published

    The future of resilient supply chains

    Donadoni, M., Roden, S., Scholten, K., Stevenson, M., Caniato, F., van Donk, D. P. & Wieland, A., 3/01/2019, Revisiting supply chain risk. Zsidisin, G. A. & Henke, M. (eds.). Cham: Springer, p. 169-186 18 p. (Springer Series in Supply Chain Management; vol. 7).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  3. Published

    Embedding hands-on experience with ERP systems into university courses: aligning academic and industry needs

    Stevenson, M., 2008, ERP: Enhancing and Sustaining Value. Hyderabad: ICFAI University Press, p. 188-202 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  4. Conference contribution/Paper
  5. Published

    Actor Network Theory and ES adoption and Implementation: Learning from the expereince of Chinese SMEs

    Brown, D., Xu, Z. & Stevenson, M., 4/09/2018, British Academy of Management 2018 Proceedings. British Academy of Management, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  6. Published

    Enterprise Systems Adoption and Implementation in Chinese SMEs: Exploring relationships between user firms and technology providers through ANT

    Xu, Z., Brown, D. & Stevenson, M., 18/08/2018, AMCIS 2018 Proceedings: Twenty-fourth Americas Conference on Information Systems, New Orleans. Association for Information Systems, 10 p. (Americas Conference on Information Systems 2018: Digital Disruption, AMCIS 2018).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  7. Published

    Adopting and Implementing Enterprise Systems in Chinese SMEs: An ANT Perspective

    Xu, Z., Brown, D. & Stevenson, M., 26/06/2018, PACIS 2018 - Opportunities and Challenges for the Digitized Society: Are We Ready?. Association for Information Systems, 283

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  8. Published

    Enterprise System Engagement in Chinese SMEs: Issues of Policy Implementation

    Xu, Z., Brown, D. H. & Stevenson, M., 1/09/2017, Proceedings of the British Academy of Management 2017.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  9. Published

    ES Adoption in Chinese SMEs: Policy Effects on Users and Providers

    Brown, D. H., Xu, Z. & Stevenson, M., 1/08/2017, AMCIS 2017 Proceedings: The 23rd Americas Conference on Information Systems.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  10. E-pub ahead of print

    Load-based POLCA: an assessment of the load accounting approach

    Fernandes, N. O., Thurer, M., Stevenson, M. & Carmo-Silva, S., 29/03/2017, Recent Advances in Information Systems and Technologies: World Conference on Information Systems and Technologies (WorldCIST). Rocha, Á., Correia, A. M., Adeli, H., Reis, L. P. & Costanzo, S. (eds.). Cham: Springer, Vol. 2. p. 397-405 9 p. (Advances in Intelligent Systems and Computing; vol. 570).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  11. Published

    ES adoption in Chinese SMEs: institutional effects on users and providers

    Xu, Z., Brown, D. H. & Stevenson, M., 2016, Proceedings of UKAIS 2016: Information Systems (IS) Comes of Age 21 years of IS, looking back to look forward. UKAIS, 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  12. Published

    User and provider perspectives on ES engagement by Chinese SMEs: a process analysis

    Xu, Z., Brown, D. & Stevenson, M., 2015, The 14th International Conference on e-Learning, e-Business, Enterprise Information Systems, and e-Government (EEE'15) . p. 61-68 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  13. Published

    Adoption of enterprise systems in Chinese SMEs: contrasting user and provider experiences

    Brown, D., Xu, Z. & Stevenson, M., 2015, ICIME 2015 5th International Conference on IS Management and Evaluation - Shaanxi, China . Chen, J. Q., Xinghua, D., Hu, W. & Zhang, R. (eds.). Reading: Academic Conferences and Publishing International Limited, p. 10-19 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  14. Published

    Sustainable Sourcing: a Plethora of Theories?

    Hendry, L., Zorzini, M. & Stevenson, M., 2012, Proceedings of the P&OM World Conference, 2012 Amsterdam.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  15. Published

    A contingency-based approach to the internationalization of operations: a multi-case analysis in Argentina

    Zorzini, M., Stevenson, M. & Hendry, L., 2011, POMS Annual Conference (Reno) - 2011. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  16. Published

    Investigating the applicability and impact of enterprise resource planning systems: the effect of production strategy

    Aslan, B., Stevenson, M. & Hendry, L., 2011, 18th European Operations Management Association (EurOMA) Conference (Cambridge) - 2011.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  17. Published

    Risk from product counterfeiting and the resilience of legitimate supply chains

    Busby, J. & Stevenson, M., 2011, 19th SRA Europe Conference (Stuttgart) - 2011.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  18. Published

    Product counterfeiting and supply chain resilience: The effect of production strategy

    Stevenson, M. & Busby, J., 2011, 22nd Production and Operations Management Society (POMS) Conference (Reno).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  19. Published

    Workload control due date setting rules: the key to short and reliable lead times

    Thurer, M., Stevenson, M., Silva, C., Land, M. & Fredendall, L., 2011, 22nd Production and Operations Management Society (POMS) Conference (Reno).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  20. Published

    Improving the applicability of workload control (WLC): the influence of sequence dependent set-up times on the performance of WLC in job shops

    Thurer, M., Silva, C. & Stevenson, M., 2011, 17th European Operations Management Association (EurOMA) Conference (Porto) - 2010.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  21. Published

    An Assessment of the Applicability of Enterprise Resource Planning Systems to Make-to-Order Companies

    Aslan, B., Stevenson, M. & Hendry, L., 2011, 6th European, Mediterranean & Middle Eastern Conference on Information Systems (EMCIS) (Ankara) - 2009.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  22. Published

    Internationalizing operations into emerging economies: a cross-case analysis

    Zorzini, M., Stevenson, M. & Hendry, L., 2010, POMS Annual Conference (Vancouver) - 2010. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  23. Published

    Approaches to the internationalization of operations: a multi-case study analysis

    Zorzini, M., Stevenson, M. & Hendry, L., 2010, 16th International Working Seminar on Production Economics (Innsbruck) - 2010. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  24. Published

    Managing supply chain uncertainty: Emerging ethical issues

    Hendry, L., Stevenson, M. & Simangunsong, E., 2010, 17th European Operations Management Association (EurOMA) Conference (Porto) - 2010. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  25. Published

    Successful implementation of workload control: results of an action research project

    Hendry, L., Stevenson, M. & Huang, Y., 2010, 16th International Working Seminar on Production Economics (Innsbruck) - 2010. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  26. Published

    Managing supply chain uncertainty: emerging ethical issues

    Stevenson, M., Simangunsong, E. S. & Hendry, L., 2010, 21st Production and Operations Management Society (POMS) Conference (Vancouver).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  27. Published

    Naturalistic decision making and social structure: a case study of coordination under conditions of growth of small firms

    Vanharanta, M. & Stevenson, M., 2009, Academy of Management Conference (Chicago) - 2009. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  28. Published

    NDM integrated organizational structures and the growth of organizations

    Vanharanta, M. & Stevenson, M., 2009, 9th Bi-annual International Conference on Naturalistic Decision Making (London) - 2009. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  29. Published

    An action research project to improve customer responsiveness in a bespoke manufacturing company

    Stevenson, M., Hendry, L. & Huang, Y., 2009, Global Challenges and opportunities: The 20th Production and Operations Management Society (POMS) Conference (Florida) - 2009. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  30. Published

    Using workload control in a supply chain context: an action research project

    Huang, Y., Stevenson, M. & Hendry, L., 2009, 2nd International Workshop on Successful Strategies in Supply Chain Management (Hong Kong) - 2009. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  31. Published

    Developing an implementation strategy for workload control: an action research project

    Stevenson, M., Huang, Y. & Hendry, L., 2008, 3rd World Conference on Production and Operations Management (Tokyo) - 2008. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  32. Published

    Supply chain uncertainty: A framework linking sources, management strategies and performance

    Simangunsong, E., Hendry, L. & Stevenson, M., 2008, 15th European Operations Management Association (EurOMA) Conference (Groningen) - 2008. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  33. Published

    Organisational embedding of a workload control concept: An action research project

    Huang, Y., Stevenson, M. & Hendry, L., 2008, 15th European Operations Management Association (EurOMA) Conference (Groningen) - 2008. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  34. Published

    Customer enquiry management in a global competitive context: a comparative multi-case analysis

    Zorzini, M., Stevenson, M. & Hendry, L., 2008, 15th International Working Seminar on Production Economics (Austria) - 2008. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  35. Published

    Flexibility in the supply chain: addressing research gaps through empirical study

    Stevenson, M., 2007, 14th International EurOMA Conference (Ankara, Turkey) - 2007. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  36. Published

    Implementation issues for workload control: European exploratory empirical research

    Hendry, L., Land, M. L., Stevenson, M. & Gaalman, G., 2007, 14th European Operations Management Association (EurOMA) Conference (Ankara) - 2007. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  37. Published

    Customer enquiry management and product customization: An empirical multi-case study analysis in the European capital goods sector

    Zorzini, M., Hendry, L. & Stevenson, M., 2007, 14th European Operations Management Association (EurOMA) Conference (Ankara) - 2007. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  38. Published

    Investigating implementation issues for workload control: a comparative case study analysis

    Stevenson, M., Hendry, L., Land, M. L. & Gaalman, G., 2006, 14th International Working Seminar on Production Economics (Innsbruck) - 2006. N/A: unknown, Vol. 3. p. 129-142 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  39. Published

    The development of a decision support system (DSS) for workload control (WLC): a case study

    Stevenson, M. & Hendry, L., 2005, Winds of Change: Production and Operations Management Society (POMS) Conference (Chicago) - 2005. N/A: unknown

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  40. Published

    Aggregate load oriented workload control

    Stevenson, M., Hendry, L. & Kingsman, B. G., 2004, 13th International Working Seminar of Production Economics (Innsbruck) - 2004. N/A: unknown, Vol. 1. p. 399-411 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  41. Published

    A review of new and established production planning and control (PPC) methods and their applicability to make-to-order (MTO) companies

    Stevenson, M., Hendry, L. & Kingsman, B. G., 2003, One World? One view of Operations Management? EurOMA-POMS Conference, Como, Italy - 2003. N/A: unknown, Vol. 2. p. 739-748 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  42. Conference paper
  43. Published

    Load-based ConWIP: An assessment by simulation

    Thurer, M., Fernandes, N. O., Ziengs, N., Stevenson, M. & Qu, T., 24/06/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  44. Published

    Slave to Fashion: Detecting Modern Slavery in the Fashion Industry

    Benstead, A., Hendry, L. C. & Stevenson, M., 12/04/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  45. Published
  46. Published

    Social capital and signalling explanations of buyer supplier relationships in the supply chain risk management process

    Fan, Y. & Stevenson, M., 4/07/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  47. Published

    Horizontal supply chain collaboration in response to modern slavery legislation: a relational perspective

    Benstead, A., Hendry, L. C. & Stevenson, M., 27/02/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  48. Published

    Local food supply chain resilience: The Brexit effect?

    Hendry, L. C., Sayed, M., Stevenson, M., MacBryde, J., Liu, L. & Ball, P., 2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  49. Published

    Detecting modern slavery in supply chains: A targeted audit approach

    Benstead, A., Hendry, L. C. & Stevenson, M., 2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  50. Published

    On the meaning of business excellence: does business excellence mean doing excellent business?

    Thurer, M., Stevenson, M., Protzman III, C. W., Fredendall, L. & Tomasevic, I., 30/11/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  51. Published
  52. Published

    The future of resilient supply chains: a Delphi study

    Donadoni, M., Roden, S., Scholten, K., Stevenson, M., Blome, C., Caniato, F., Juttner, U., Krumme, K., van Donk, D. P. & Wieland, A., 20/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  53. Published

    The reshoring process in the UK textiles industry

    Benstead, A., Hendry, L. C. & Stevenson, M., 17/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  54. Published

    Creating sustainable value through social business operations at the bottom of the pyramid

    Chowdhury, I. N., Huq, F., Gold, S. & Stevenson, M., 11/04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  55. Published

    Supply chain resilience in a developing country: a case study analysis of a supply network in Uganda

    Tukamuhabwa R, B., Stevenson, M. & Busby, J., 29/06/2015, p. 1-10. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  56. Published
  57. Published

    Reshoring in the UK textiles and clothing industry: an exploratory study

    Benstead, A., Hendry, L. & Stevenson, M., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  58. Published
  59. Published

    Buffer analysis: a framework for decomposition

    Land, M., Thurer, M., Stevenson, M. & Fredendall, L., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  60. Published

    A card-based delivery date promising approach for high-variety manufacturing

    Land, M., Thurer, M., Stevenson, M. & Fredendall, L., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  61. Published
  62. Published
  63. Published

    Lean for small make-to-order shops: operationalizing Workload Control (WLC) using spreadsheets

    Thurer, M., Filho, M., Fredendall, L., Land, M. & Stevenson, M., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  64. Published

    Social sustainability in the Apparel Supply Chain: an Institutional Theory perspective

    Huq, F., Stevenson, M., Zorzini, M. & Hendry, L., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  65. Published

    Developments, opportunities and challenges faced by small manufacturers in Brazil: An exploratory survey

    Thurer, M., Filho, M., Stevenson, M. & Fredendall, L., 2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  66. Published

    Controlled order release (OR) in two-level multi-stage job shops: An assessment by simulation

    Thurer, M., Stevenson, M., Silva, C., Land, M. & Filho, M., 2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  67. Published

    Integrating load-based order release and priority dispatching

    Land, M., Stevenson, M. & Thurer, M., 2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  68. Published

    A case study of the successful implementation of Workload Control: A practitioner-led approach

    Silva, C., Thurer, M. & Stevenson, M., 2012. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  69. Published

    Workload control and the OM-marketing link in MTO companies: Successful implementation in practice

    Hendry, L., Stevenson, M. & Huang, Y., 2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  70. Published

    Emergent research design strategies in collaborative research: a tale of two studies

    Spring, M., Stevenson, M. & Selviaridis, K., 2007.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  71. Doctoral Thesis
  72. Unpublished

    Bridging the Gap: Refining a Workload Control Concept for Practical Implementation.

    Stevenson, M., 2006, (Unpublished) Lancaster: Lancaster University. 386 p.

    Research output: ThesisDoctoral Thesis

  73. Journal article
  74. Forthcoming

    Material Flow Control in High-Variety Make-to-Order Shops: Combining COBACABANA and POLCA

    Thurer, M., Fernandes, N. & Stevenson, M., 5/05/2020, (Accepted/In press) In : Production and Operations Management.

    Research output: Contribution to journalJournal article

  75. Forthcoming

    Supplier Initiating Risk Management Behaviour and Supply-Side Resilience: The Effects of Interpersonal Relationships and Dependence Asymmetry in Buyer-Supplier Relationships

    Fan, Y., Stevenson, M. & Li, F., 22/04/2020, (Accepted/In press) In : International Journal of Operations and Production Management.

    Research output: Contribution to journalJournal article

  76. Forthcoming

    Workload Control in Additive Manufacturing Shops where Post-Processing is a Constraint: An Assessment by Simulation

    Thurer, M., Huang, Y. & Stevenson, M., 21/04/2020, (Accepted/In press) In : International Journal of Production Research.

    Research output: Contribution to journalJournal article

  77. Published

    A systematic review of China’s belt and road initiative: Implications for global supply chain management

    Thurer, M., Tomasevic, I., Stevenson, M., Blome, C., Melnyk, S. A., Chan, H. K. & Huang, G., 1/04/2020, In : International Journal of Production Research. 58, 8, p. 2436-2453 18 p.

    Research output: Contribution to journalJournal article

  78. Published

    Absorptive and Desorptive Capacity Configurations in Supply Chains: An Inverted U-shaped Relationship

    Roldán Bravo, M. I., Stevenson, M., Ruiz Moreno, A. & Llorens-Montes, J., 1/04/2020, In : International Journal of Production Research. 58, 7, p. 2036-2053 18 p.

    Research output: Contribution to journalJournal article

  79. E-pub ahead of print

    Systematic review and discussion of production control systems that emerged between 1999 and 2018

    Bagni, G., Godinho Filho, M., Thürer, M. & Stevenson, M., 23/03/2020, In : Production Planning and Control. 15 p.

    Research output: Contribution to journalJournal article

  80. E-pub ahead of print

    Workload Control Order Release in General and Pure Flow Shops with Limited Buffer Size Induced Blocking: An Assessment by Simulation

    Thurer, M., Ma, L. & Stevenson, M., 6/03/2020, In : International Journal of Production Research.

    Research output: Contribution to journalJournal article

  81. E-pub ahead of print

    State-Dependent Service Rates in Make-to-Order Shops: An Assessment by Simulation

    Thurer, M., Stevenson, M., Aitken, J. & Silva, C., 4/02/2020, In : Operations Management Research.

    Research output: Contribution to journalJournal article

  82. Published

    Implementing socially sustainable practices in challenging institutional contexts: Building theory from seven supplier cases

    Huq, F. & Stevenson, M., 1/01/2020, In : Journal of Business Ethics. 161, 2, p. 415-442 28 p.

    Research output: Contribution to journalJournal article

  83. Published

    Parts feeding in two-stage assembly system: an assessment by simulation

    Thurer, M., Fernandes, N. O. & Stevenson, M., 31/12/2019, In : Journal of Industrial and Production Engineering. 36, 7, p. 493-501 9 p.

    Research output: Contribution to journalJournal article

  84. Published

    Dealing With the Unpredictable: Supply Chain Resilience

    Scholten, K., Stevenson, M. & van Donk, D. P., 19/12/2019, In : International Journal of Operations and Production Management. 40, 1, p. 1-10 10 p.

    Research output: Contribution to journalJournal article

  85. Published

    Non-linear effects of relational capital on supply-side resilience: The moderating role of boundary spanners’ personal ties

    Fan, Y. & Stevenson, M., 6/12/2019, In : International Journal of Operations and Production Management. 39, 9/10, p. 1053-1075 23 p.

    Research output: Contribution to journalJournal article

  86. E-pub ahead of print

    Lot Synchronization in Make-to-Order Shops with Order Release Control: An Assessment by Simulation

    Fernandes, N. O., Thurer, M., Stevenson, M. & Carmo-Silva, S., 5/11/2019, In : International Journal of Production Research.

    Research output: Contribution to journalJournal article

  87. E-pub ahead of print

    A game theory model based on Gale-Shapley for dual-resource constrained (DRC) flexible job shop scheduling

    Renna, P., Thurer, M. & Stevenson, M., 1/11/2019, In : International Journal of Industrial Engineering Computations. 11, 2, p. 173-184 12 p.

    Research output: Contribution to journalJournal article

  88. E-pub ahead of print

    Worker Assignment in Dual Resource Constrained Assembly Job Shops with Worker Heterogeneity: An Assessment by Simulation

    Thurer, M., Zhang, H., Stevenson, M., Costa, F. & Ma, L., 17/10/2019, In : International Journal of Production Research.

    Research output: Contribution to journalJournal article

  89. Published

    POLC-A: an assessment of POLCA’s authorization element

    Thurer, M., Fernandes, N. O., Stevenson, M., Silva, C. & Carmo-Silva, S., 1/08/2019, In : Journal of Intelligent Manufacturing. 30, 6, p. 2435–2447 13 p.

    Research output: Contribution to journalJournal article

  90. Published

    Blockchain technology: Implications for operations and supply chain management

    Cole, R., Stevenson, M. & Aitken, J., 1/07/2019, In : Supply Chain Management: An International Journal. 24, 4, p. 469-483 15 p.

    Research output: Contribution to journalJournal article

  91. E-pub ahead of print

    The use of finite loading to guide short-term capacity adjustments in make-to-order job shops: An assessment by simulation

    Thurer, M. & Stevenson, M., 25/06/2019, In : International Journal of Production Research.

    Research output: Contribution to journalJournal article

  92. Published

    Local food supply chain resilience to constitutional change: The Brexit effect

    Hendry, L. C., Stevenson, M., MacBryde, J., Ball, P., Sayed, M. & Liu, L., 3/05/2019, In : International Journal of Operations and Production Management. 39, 3, p. 429-453 25 p.

    Research output: Contribution to journalJournal article

  93. Published

    On the combined effect of due date setting, order release, and output control: an assessment by simulation

    Thurer, M., Stevenson, M., Land, M. J. & Fredendall, L., 19/03/2019, In : International Journal of Production Research. 57, 6, p. 1741-1755 15 p.

    Research output: Contribution to journalJournal article

  94. Published

    Workload control in dual resource constrained high-variety shops: an assessment by simulation

    Thurer, M., Stevenson, M. & Renna, P., 1/03/2019, In : International Journal of Production Research. 57, 3, p. 931-947 17 p.

    Research output: Contribution to journalJournal article

  95. Published

    On the meaning of ConWIP cards: an assessment by simulation

    Thurer, M., Fernandes, N. O., Ziengs, N. & Stevenson, M., 1/03/2019, In : Journal of Industrial and Production Engineering. 36, 1, p. 49-58 3 p.

    Research output: Contribution to journalJournal article

  96. Published

    Centralised vs. decentralised control decision in card-based control systems: comparing kanban systems and COBACABANA

    Thurer, M., Fernandes, N. O., Stevenson, M., Qu, T. & Li, C. D., 2019, In : International Journal of Production Research. 57, 2, p. 322-337 16 p.

    Research output: Contribution to journalJournal article

  97. Published

    Horizontal Collaboration in Response to Modern Slavery Legislation: An Action Research Project

    Benstead, A. V., Hendry, L. C. & Stevenson, M., 3/12/2018, In : International Journal of Operations and Production Management. 38, 12, p. 2286-2312 27 p.

    Research output: Contribution to journalJournal article

  98. E-pub ahead of print

    On the integration of manufacturing strategy: Deconstructing Hoshin Kanri

    Thurer, M., Fredendall, L., Gianiodis, P., Maschek, T., Deuse, J. & Stevenson, M., 22/11/2018, In : Management Research Review. 15 p.

    Research output: Contribution to journalJournal article

  99. Published

    Lot splitting under load-limiting order release in high-variety shops: An assessment by simulation

    Thürer, M., Fernandes, N. O., Carmo-Silva, S. & Stevenson, M., 07/2018, In : Journal of Manufacturing Systems. 48, Part A, p. 63-72 10 p.

    Research output: Contribution to journalJournal article

  100. Published

    Reading On and Between the Lines: Risk Identification in Collaborative and Adversarial Buyer-Supplier Relationships

    Fan, Y. & Stevenson, M., 11/06/2018, In : Supply Chain Management: An International Journal. 23, 4, p. 351-376 26 p.

    Research output: Contribution to journalJournal article

  101. Published

    Modern Slavery in Supply Chains: A Secondary Data Analysis of Detection, Remediation, and Disclosure

    Stevenson, M. & Cole, R., 05/2018, In : Supply Chain Management: An International Journal. 12, 3, p. 81-99 19 p.

    Research output: Contribution to journalJournal article

  102. Published

    A Systematic Review of the Literature on Integrating Sustainability into Engineering Curricula

    Thürer, M., Tomašević, I., Stevenson, M., Qu, T. & Huisingh, D., 20/04/2018, In : Journal of Cleaner Production. 181, p. 608-617 10 p.

    Research output: Contribution to journalJournal article

  103. Published

    Supply chain flexibility in dynamic environments: The enabling role of operational absorptive capacity and organisational learning

    Gallego-Burin, A. R., Stevenson, M., Llorens-Montes, J. & Perez-Arostegui, M. N., 03/2018, In : International Journal of Operations and Production Management. 38, 3, p. 636-666 31 p.

    Research output: Contribution to journalJournal article

  104. Published

    Bottleneck-oriented order release with shifting bottlenecks: An assessment by simulation

    Thurer, M. & Stevenson, M., 03/2018, In : International Journal of Production Economics. 197, p. 275-282 8 p.

    Research output: Contribution to journalJournal article

  105. E-pub ahead of print

    On the meaning and use of excellence in the operations literature: a systematic review

    Thurer, M., Tomasevic, I., Stevenson, M., Fredendall, L. & Protzman III, C. W., 6/02/2018, In : Total Quality Management and Business Excellence. 28 p.

    Research output: Contribution to journalJournal article

  106. E-pub ahead of print

    A review on supply chain risk management: Definition, theory, and research agenda

    Fan, Y. & Stevenson, M., 10/01/2018, In : International Journal of Physical Distribution and Logistics Management. 48, 3, p. 205-230 26 p.

    Research output: Contribution to journalJournal article

  107. Published

    On the Beat of the Drum: Improving the Flow Shop Performance of the Drum-Buffer-Rope Scheduling Mechanism

    Thurer, M. & Stevenson, M., 2018, In : International Journal of Production Research. 56, 9, p. 3294-3305 12 p.

    Research output: Contribution to journalJournal article

  108. Published

    Supply chain resilience in a developing country context: A case study on the interconnectedness of threats, strategies, and outcomes

    Tukamuhabwa Rwakira, B., Stevenson, M. & Busby, J. S., 4/12/2017, In : Supply Chain Management: An International Journal. 22, 6, p. 486-505 20 p.

    Research output: Contribution to journalJournal article

  109. Published

    Why and how do firms reshore? A contingency-based conceptual framework

    Benstead, A., Stevenson, M. & Hendry, L. C., 12/2017, In : Operations Management Research. 10, 3-4, p. 85-103 19 p.

    Research output: Contribution to journalJournal article

  110. Published

    On strategic trade-offs: Does the principle of energy conservation explain the trade-off law?

    Thurer, M., Stevenson, M., Sarmiento, R. & Gianiodis, P., 11/2017, In : Management Research Review. 40, 11, p. 1163-1174 12 p.

    Research output: Contribution to journalJournal article

  111. Published

    Deconstructing bottleneck shiftiness: the impact of the bottleneck position on order release control in pure flow shops

    Thurer, M., Qu, T., Stevenson, M., Huang, G. & Li, C. D., 09/2017, In : Production Planning and Control. 28, 15, p. 1223-1235 13 p.

    Research output: Contribution to journalJournal article

  112. Published

    Improving performance in POLCA controlled high variety shops: an assessment by simulation

    Thurer, M., Fernandes, N. O., Carmo-Silva, S. & Stevenson, M., 07/2017, In : Journal of Manufacturing Systems. 44, Part 1, p. 143-153 11 p.

    Research output: Contribution to journalJournal article

  113. Published

    On the backlog-sequencing decision for extending the applicability of ConWIP to high-variety contexts: an assessment by simulation

    Thurer, M., Fernandes, N. O., Stevenson, M. & Qu, T., 06/2017, In : International Journal of Production Research. 55, 16, p. 4695-4711 17 p.

    Research output: Contribution to journalJournal article

  114. Published

    Drum-buffer-rope and workload control in high-variety flow and job shops with bottlenecks: an assessment by simulation

    Thurer, M., Stevenson, M., Silva, C. & Qu, T., 06/2017, In : International Journal of Production Economics. 188, p. 116-127 12 p.

    Research output: Contribution to journalJournal article

  115. Published

    On the integration of due date setting and order release control

    Thurer, M., Land, M., Stevenson, M. & Fredendall, L., 05/2017, In : Production Planning and Control. 28, 5, p. 420-430 11 p.

    Research output: Contribution to journalJournal article

  116. Published

    On the meaning of ‘waste’: review and definition

    Thurer, M., Tomasevic, I. & Stevenson, M., 03/2017, In : Production Planning and Control. 28, 3, p. 244-255 12 p.

    Research output: Contribution to journalJournal article

  117. Published

    The relationship between risk control imperative and perceived causation: the case of product counterfeiting in China

    Ding, B., Stevenson, M. & Busby, J. S., 2017, In : Journal of Risk Research. 20, 6, p. 800-826 27 p.

    Research output: Contribution to journalJournal article

  118. Published

    Managing Supply Chains Uncertainty with Emerging Ethical Issues

    Simangunsong, E., Hendry, L. & Stevenson, M., 3/10/2016, In : International Journal of Operations and Production Management. 36, 10, p. 1281-1307 27 p.

    Research output: Contribution to journalJournal article

  119. Published

    Managing supply chain uncertainty with emerging ethical issues

    Simangunsong, E., Hendry, L. C. & Stevenson, M., 29/09/2016, In : International Journal of Operations and Production Management. 36, 10, p. 1272-1307 36 p.

    Research output: Contribution to journalJournal article

  120. Published

    Improving the logistics of a constant order-cycle Kanban system

    Silva, C., Ferreira, L. M., Thurer, M. & Stevenson, M., 07/2016, In : Production Planning and Control. 27, 7-8, p. 650-659 10 p.

    Research output: Contribution to journalJournal article

  121. Published

    Workload control in job shops with re-entrant flows: an assessment by simulation

    Thurer, M. & Stevenson, M., 07/2016, In : International Journal of Production Research. 54, 17, p. 5136-5150 15 p.

    Research output: Contribution to journalJournal article

  122. E-pub ahead of print

    Card-based delivery date promising in pure flow shops with order release control

    Thurer, M. & Stevenson, M., 22/04/2016, In : International Journal of Production Research. 54, 22, p. 6798-6811 14 p.

    Research output: Contribution to journalJournal article

  123. Published

    On the integration of input and output control: workload control order release

    Thurer, M., Stevenson, M. & Land, M., 04/2016, In : International Journal of Production Economics. 174, p. 43-53 11 p.

    Research output: Contribution to journalJournal article

  124. Published

    Job sequencing and selection within workload control order release: an assessment by simulation

    Thurer, M., Stevenson, M. & Qu, T., 02/2016, In : International Journal of Production Research. 54, 4, p. 1061-1075 15 p.

    Research output: Contribution to journalJournal article

  125. Published

    Handling the complexities of real-life job shops when implementing workload control: a decision framework and case study

    Cransberg, V., Land, M., Hicks, C. & Stevenson, M., 02/2016, In : International Journal of Production Research. 54, 4, p. 1094-1109 16 p.

    Research output: Contribution to journalJournal article

  126. Published

    Card-based delivery date promising in high-variety manufacturing with order release control

    Thurer, M., Land, M., Stevenson, M. & Fredendall, L. D., 02/2016, In : International Journal of Production Economics. 172, p. 19-30 12 p.

    Research output: Contribution to journalJournal article

  127. Published

    Load oriented order release (LOOR) revisited: bringing it back to the state of the art

    Yan, H., Stevenson, M., Hendry, L. C. & Land, M. J., 2016, In : Production Planning and Control. 27, 13, p. 1078-1091 14 p.

    Research output: Contribution to journalJournal article

  128. Published

    Card-based production control: a review of the control mechanisms underpinning Kanban, ConWIP, POLCA and COBACABANA systems

    Thurer, M., Stevenson, M. & Protzman III, C. W., 2016, In : Production Planning and Control. 27, 14, p. 1143-1157 15 p.

    Research output: Contribution to journalJournal article

  129. Published

    Job shop control: in search of the key to delivery improvements

    Land, M., Stevenson, M., Thurer, M. & Gaalman, G. J. C., 10/2015, In : International Journal of Production Economics. 168, p. 257-266 10 p.

    Research output: Contribution to journalJournal article

  130. Published

    COBACABANA (control of balance by card based navigation): an alternative to kanban in the pure flow shop?

    Thurer, M., Stevenson, M. & Protzman III, C. W., 08/2015, In : International Journal of Production Economics. 166, p. 143-151 9 p.

    Research output: Contribution to journalJournal article

  131. Published

    Concerning workload control and order release: the pre-shop pool sequencing decision

    Thurer, M., Land, M., Stevenson, M., Fredendall, L. & Filho, M., 07/2015, In : Production and Operations Management. 24, 7, p. 1179-1192 14 p.

    Research output: Contribution to journalJournal article

  132. Published

    The applicability and impact of Enterprise Resource Planning (ERP) systems: results from a mixed method study on Make-To-Order (MTO) companies

    Aslan, B., Stevenson, M. & Hendry, L., 06/2015, In : Computers in Industry. 70, p. 127-143 17 p.

    Research output: Contribution to journalJournal article

  133. Published

    The effects of managerial decision making behavior and order book size on workload control system implementation in make-to-order companies

    Stevenson, M. & Vanharanta, M., 2015, In : Production Planning and Control. 26, 2, p. 97-115 19 p.

    Research output: Contribution to journalJournal article

  134. Published

    An exploratory analysis of counterfeiting strategies: towards counterfeit-resilient supply chains

    Stevenson, M. & Busby, J., 2015, In : International Journal of Operations and Production Management. 35, 1, p. 110-144 35 p.

    Research output: Contribution to journalJournal article

  135. Published

    Socially responsible sourcing: reviewing the literature and its use of theory

    Zorzini, M., Hendry, L., Huq, F. & Stevenson, M., 2015, In : International Journal of Operations and Production Management. 35, 1

    Research output: Contribution to journalJournal article

  136. Published

    A case study of the successful implementation of workload control: a practitioner-led approach

    Silva, C., Stevenson, M. & Thurer, M., 2015, In : Journal of Manufacturing Technology Management. 26, 2, p. 280-296 17 p.

    Research output: Contribution to journalJournal article

  137. Published

    Simple subcontracting rules for make-to-order shops with limited subcontractor capacity: an assessment by simulation

    Thurer, M., Stevenson, M. & Qu, T., 2015, In : Production Planning and Control. 26, 13, p. 1145-1161 17 p.

    Research output: Contribution to journalJournal article

  138. Published

    Supply chain resilience: definition, review and theoretical foundations for further study

    Tukamuhabwa Rwakira, B., Stevenson, M., Busby, J. & Zorzini, M., 2015, In : International Journal of Production Research. 53, 18, p. 5592-5623 32 p.

    Research output: Contribution to journalJournal article

  139. Published

    Small and medium sized manufacturing companies in Brazil: is innovativeness a key competitive capability to develop?

    Thurer, M., Filho, M., Stevenson, M. & Fredendall, L., 2015, In : Acta Scientiarum. Technology. 37, 3, p. 379-387 9 p.

    Research output: Contribution to journalJournal article

  140. Published

    The design of simple subcontracting rules for make-to-order shops: an assessment by simulation

    Thurer, M., Stevenson, M., Qu, T. & Filho, M., 16/12/2014, In : European Journal of Operational Research. 239, 3, p. 854-864 11 p.

    Research output: Contribution to journalJournal article

  141. Published

    Small manufacturers in Brazil: competitive priorities vs. capabilities

    Thurer, M., Filho, M., Stevenson, M. & Fredendall, L., 10/2014, In : International Journal of Advanced Manufacturing Technology. 74, 9-12, p. 1175-1185 11 p.

    Research output: Contribution to journalJournal article

  142. Published

    Coordinating offshored operations in emerging economies: a contingency-based study

    Zorzini, M., Stevenson, M. & Hendry, L., 07/2014, In : International Journal of Production Economics. 153, p. 323-339 17 p.

    Research output: Contribution to journalJournal article

  143. Published

    Lean control for make-to-order companies: integrating customer enquiry management and order release

    Thurer, M., Stevenson, M., Silva, C., Land, M., Fredendall, L. & Melnyk, S. A., 03/2014, In : Production and Operations Management. 23, 3, p. 463-476 14 p.

    Research output: Contribution to journalJournal article

  144. Published

    Card-based workload control for job shops: improving COBACABANA

    Thurer, M., Land, M. & Stevenson, M., 01/2014, In : International Journal of Production Economics. 147 Part A, p. 180-188 9 p.

    Research output: Contribution to journalJournal article

  145. Published

    Controlled order release: a performance assessment in job shops with sequence dependent set-up times

    Thürer, M., Silva, C., Stevenson, M. & Land, M., 2014, In : Production Planning and Control. 25, 7, p. 603-615 13 p.

    Research output: Contribution to journalJournal article

  146. Published

    Integrating load-based order release and priority dispatching

    Land, M., Stevenson, M. & Thurer, M., 2014, In : International Journal of Production Research. 52, 4, p. 1059-1073 15 p.

    Research output: Contribution to journalJournal article

  147. Published

    Social sustainability in developing country suppliers: an exploratory study in the readymade garments industry of Bangladesh

    Huq, F., Stevenson, M. & Zorzini, M., 2014, In : International Journal of Operations and Production Management. 34, 5, p. 610-638 29 p.

    Research output: Contribution to journalJournal article

  148. Published

    Continuous workload control order release revisited: an assessment by simulation

    Thurer, M., Qu, T., Stevenson, M., Maschek, T. & Filho, M., 2014, In : International Journal of Production Research. 55, 22, p. 6664-6680 17 p.

    Research output: Contribution to journalJournal article

  149. Published

    Coping with finite storage space in job shops through order release control: an assessment by simulation

    Thurer, M., Filho, M. & Stevenson, M., 09/2013, In : International Journal of Computer Integrated Manufacturing. 26, 9, p. 830-838 9 p.

    Research output: Contribution to journalJournal article

  150. Published

    Workload control and order release in two-level multi-stage job shops: an assessment by simulation

    Thurer, M., Stevenson, M., Silva, C., Land, M. & Filho, M., 02/2013, In : International Journal of Production Research. 51, 3, p. 869-882 14 p.

    Research output: Contribution to journalJournal article

  151. Published

    Workload control: Successful implementation taking a contingency-based view of production planning & control

    Hendry, L., Huang, Y. & Stevenson, M., 2013, In : International Journal of Operations and Production Management. 33, 1, p. 69-103 35 p.

    Research output: Contribution to journalJournal article

  152. Published

    Towards an integrated Workload Control (WLC) concept: the performance of due date setting rules in job shops with contingent orders

    Thurer, M., Stevenson, M., Silva, C. & Land, M., 2013, In : International Journal of Production Research. 51, 15, p. 4502-4516 15 p.

    Research output: Contribution to journalJournal article

  153. Published

    The role of services in flexible supply chains: an exploratory study

    Stevenson, M., 2013, In : International Journal of Agile Systems and Management. 6, 4, p. 307-323 17 p.

    Research output: Contribution to journalJournal article

  154. Published

    Competitive priorities of small manufacturers in Brazil

    Thurer, M., Filho, M., Stevenson, M. & Fredendall, L., 2013, In : Industrial Management and Data Systems. 113, 6, p. 856-874 19 p.

    Research output: Contribution to journalJournal article

  155. Published

    Workload control (WLC) and order release: a lean solution for make-to-order companies

    Thurer, M., Stevenson, M., Silva, C., Land, M. & Fredendall, L., 09/2012, In : Production and Operations Management. 21, 5, p. 939-953 15 p.

    Research output: Contribution to journalJournal article

  156. Published

    Enterprise resource planning systems: An assessment of applicability to make-to-order companies

    Aslan, B., Stevenson, M. & Hendry, L., 09/2012, In : Computers in Industry. 63, 7, p. 692-705 14 p.

    Research output: Contribution to journalJournal article

  157. Published

    Customer enquiry management in global supply chains: a comparative multi-case study analysis

    Zorzini, M., Stevenson, M. & Hendry, L., 04/2012, In : European Management Journal. 30, 2, p. 121-140 20 p.

    Research output: Contribution to journalJournal article

  158. Published

    Supply chain uncertainty: a review and theoretical foundation for future research

    Simangunsong, E. S., Hendry, L. & Stevenson, M., 2012, In : International Journal of Production Research. 50, 16, p. 4493-4523 30 p.

    Research output: Contribution to journalJournal article

  159. Published

    The application of workload control in assembly job shops: an assessment by simulation

    Thurer, M., Stevenson, M., Silva, C. & Huang, G., 2012, In : International Journal of Production Research. 50, 18, p. 5048-5062 15 p.

    Research output: Contribution to journalJournal article

  160. Published

    The performance of due date setting rules in assembly and multi-stage job shops: an assessment by simulation

    Thurer, M., Huang, G., Stevenson, M., Silva, C. & Filho, M., 2012, In : International Journal of Production Research. 50, 20, p. 5949-5965 17 p.

    Research output: Contribution to journalJournal article

  161. Published

    Improving the applicability of workload control (WLC): the influence of sequence dependent set-up times on workload controlled job shops

    Thurer, M., Silva, C., Stevenson, M. & Land, M., 2012, In : International Journal of Production Research. 50, 22, p. 6419-6430 12 p.

    Research output: Contribution to journalJournal article

  162. Published

    The theory and practice of workload control: A research agenda and implementation strategy

    Stevenson, M., Huang, Y., Hendry, L. & Soepenberg, E., 06/2011, In : International Journal of Production Economics. 131, 2, p. 689-700 12 p.

    Research output: Contribution to journalJournal article

  163. Published

    Optimising workload norms: The influence of shop floor characteristics on setting workload norms for the workload control concept

    Thurer, M., Silva, C. & Stevenson, M., 2011, In : International Journal of Production Research. 49, 4, p. 1151-1171 21 p.

    Research output: Contribution to journalJournal article

  164. Published

    Three decades of workload control research: a systematic review of the literature

    Thurer, M., Stevenson, M. & Silva, C., 2011, In : International Journal of Production Research. 49, 23, p. 6905-6935 31 p.

    Research output: Contribution to journalJournal article

  165. Published

    Workload control release mechanisms: from practice back to theory building

    Thurer, M., Silva, C. & Stevenson, M., 2010, In : International Journal of Production Research. 48, 12, p. 3593-3613 21 p.

    Research output: Contribution to journalJournal article

  166. Published

    The develoment and application of an interactive end-user training tool: part of an implementation strategy for workload control

    Stevenson, M., Huang, Y. & Hendry, L., 2009, In : Production Planning and Control. 20, 7, p. 622-635 14 p.

    Research output: Contribution to journalJournal article

  167. Published

    Supply chain flexibility: an inter-firm empirical study

    Stevenson, M. & Spring, M., 2009, In : International Journal of Operations and Production Management. 29, 9, p. 946-971 26 p.

    Research output: Contribution to journalJournal article

  168. Published

    Investigating implementation issues for workload control (WLC): a comparative case study analysis

    Hendry, L., Land, M. L., Stevenson, M. & Gaalman, G., 03/2008, In : International Journal of Production Economics. 112, 1, p. 452-469 18 p.

    Research output: Contribution to journalJournal article

  169. Published

    Theoretical development of a workload control methodology: evidence from two case studies

    Stevenson, M. & Silva, C., 2008, In : International Journal of Production Research. 46, 11, p. 3107-3131 25 p.

    Research output: Contribution to journalJournal article

  170. Published

    Customer enquiry management and product customization: an empirical multi-case study analysis in the Italian capital goods sector

    Zorzini, M., Hendry, L., Stevenson, M. & Pozzetti, A., 2008, In : International Journal of Operations and Production Management. 28, 12, p. 1186-1218 33 p.

    Research output: Contribution to journalJournal article

  171. Published

    Improving supply chain integration using a workload control concept and web-functionality

    Stevenson, M. & Hendry, L., 2007, In : Production Planning and Control. 18, 2, p. 142 - 155 14 p.

    Research output: Contribution to journalJournal article

  172. Published

    Flexibility and lean manufacturing in customised b2B industries

    Stevenson, M. & Hendry, L., 2007, In : Control (Journal of the Institute of Operations Management). 33, 1, p. 16-20 5 p.

    Research output: Contribution to journalJournal article

  173. Published

    Embedding hands-on experience with ERP systems into university courses: aligning academic and industry needs

    Stevenson, M., 2007, In : ITALICS. 6, 1, p. 1-11 11 p.

    Research output: Contribution to journalJournal article

  174. Published

    Flexibility from a supply chain perspective: definition and review

    Stevenson, M. & Spring, M., 2007, In : International Journal of Operations and Production Management. 27, 7, p. 685-713 29 p.

    Research output: Contribution to journalJournal article

  175. Published

    Aggregate load oriented workload control: a review and a reclassification of a key approach

    Stevenson, M. & Hendry, L., 12/2006, In : International Journal of Production Economics. 104, 2, p. 676-693 18 p.

    Research output: Contribution to journalJournal article

  176. Published

    Refining a workload control (WLC) concept: a case study

    Stevenson, M., 2006, In : International Journal of Production Research. 44, 4, p. 767-790 24 p.

    Research output: Contribution to journalJournal article

  177. Published

    A review of production planning and control: the applicability of key concepts to the make-to-order industry

    Stevenson, M., Hendry, L. & Kingsman, B. G., 2005, In : International Journal of Production Research. 43, 5, p. 869-898 30 p.

    Research output: Contribution to journalJournal article

  178. Editorial
  179. Published

    The practical implementation of production planning and control methods in SMEs

    Stevenson, M., 10/2009, In : Production Planning and Control. 20, 7, p. 541-547 7 p.

    Research output: Contribution to journalEditorial

  180. Working paper
  181. Published

    A contingency-based approach to internationalization: a multi-case study analysis in Argentina

    Zorzini, M., Stevenson, M. & Hendry, L., 2011, Lancaster University: The Department of Management Science, (Management Science Working Paper Series; vol. 2011).

    Research output: Working paper

  182. Published

    The Theory & Practice of Workload Control: A Research Agenda & Implementation Strategy

    Stevenson, M., Huang, Y., Hendry, L. & Soepenberg, E., 2010, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  183. Published

    Supply Chain Uncertainty: A Review and Theoretical Foundation for Future Research

    Simangunsong, E., Hendry, L. & Stevenson, M., 2010, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  184. Published

    Workload Control: Successful Implementation Taking a Contingency-based View of Production Planning & Control

    Hendry, L., Huang, Y. & Stevenson, M., 2010, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  185. Published

    Customer Enquiry Management in a Global Competitive Context: A Comparative Multi-Case Study Analysis

    Zorzini, M., Stevenson, M. & Hendry, L., 2008, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  186. Published

    A Review and Assessment of Enterprise Resource Planning for Make-To-Order Companies

    Aslan, B., Stevenson, M. & Hendry, L., 2008, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  187. Published

    Investigating implementation issues for workload control (WLC): a comparative case study analysis

    Hendry, L., Land, M. J., Stevenson, M. & Gaalman, G., 2007, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  188. Published

    Improving supply chain integration using a workload control (WLC) concept and web functionality

    Stevenson, M. & Hendry, L., 2005, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  189. Published

    Aggregate load oriented workload control

    Stevenson, M. & Hendry, L., 2004, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  190. Published

    A review of Production Planning and Control (PPC): the applicability of key concepts to the Make to Order (MTO) industry

    Stevenson, M., Hendry, L. & Kingsman, B. G., 2003, Lancaster University: The Department of Management Science, (Management Science Working Paper Series).

    Research output: Working paper

  191. Book
  192. Published

    Card-based control systems for a lean work design: the fundamentals of Kanban, ConWIP, POLCA and COBACABANA

    Thurer, M., Stevenson, M. & Protzman III, C. W., 22/02/2016, Boca Raton: CRC Press/Taylor & Francis, Ltd. 194 p.

    Research output: Book/Report/ProceedingsBook

  193. Published

    Kartenbasierte Steuerungssysteme für eine schlanke Arbeitsgestaltung: Grundwissen Kanban, ConWIP, POLCA und COBACABANA

    Thurer, M., Stevenson, M. & Protzman III, C. W., 2016, Wiesbaden: Springer.

    Research output: Book/Report/ProceedingsBook

Back to top