Home > Research > Researchers > Dr Xiaonan Hou > Publications

Dr Xiaonan Hou

Lecturer in Mechanical Engineering

  1. Published

    Strength of submarine hoses in Chinese-lantern configuration from hydrodynamic loads on CALM buoy

    Amaechi, C. V., Facheng Wang, Hou, X. & Ye, J., 1/01/2019, In : Ocean Engineering. 171, p. 429-442 14 p.

    Research output: Contribution to journalJournal article

  2. Published

    Composite risers for deep waters using a numerical modelling approach

    Amaechi, C. V., Gillett, N., Odijie, A. C., Hou, X. & Ye, J., 15/02/2019, In : Composite Structures. 210, p. 486-499 14 p.

    Research output: Contribution to journalJournal article

  3. Published

    Local and Global Design of Composite Risers on Truss SPAR Platform in Deep waters

    Amaechi, C. V., Ye, J., Hou, X., Gillett, N., Odijie, A. C. & Wang, F., 3/07/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  4. Published

    Recycling of Renewable Composite Materials in the Offshore Industry

    Amaechi, C. V., Agbomerie, C. O., Sotayo, A., Wang, F., Hou, X. & Ye, J., 1/09/2019, Reference Module in Materials Science and Materials Engineering. Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNEntry for encyclopedia/dictionary

  5. Published

    Numerical modelling of thermally bonded nonwovens: continuous and discontinuous approaches

    Demirci, E., Hou, X., Acar, M., Pourdeyhimi, B. & Silberschmidt, V., 05/2012, In : Solid State Phenomena. 188, p. 164-169 6 p.

    Research output: Contribution to journalJournal article

  6. Published

    Non-linear finite element model for dynamic analysis of high-speed valve train and coil collisions

    Gu, Z., Hou, X., Keating, E. & Ye, J., 1/05/2020, In : International Journal of Mechanical Sciences. 173, 10 p., 105476.

    Research output: Contribution to journalJournal article

  7. Published

    Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

    Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  8. Published

    A novel 3D composite structure with tunable Poisson's ratio and stiffness

    Hou, X. & Hu, H., 07/2015, In : physica status solidi (b). 252, 7, p. 1565–1574 10 p.

    Research output: Contribution to journalJournal article

  9. Published

    Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials

    Hou, X., Hu, H. & Silberschmidt, V., 2014, In : Journal of Applied Physics. 115, 8 p., 224903.

    Research output: Contribution to journalJournal article

  10. Published

    Numerical analysis of composite structure with in-plane isotropic negative Poisson’s ratio: effects of materials properties and geometry features of inclusions

    Hou, X., Hu, H. & Silberschmidt, V., 03/2014, In : Composites Part B: Engineering. 58, p. 152–159 8 p.

    Research output: Contribution to journalJournal article

  11. Published

    Erratum to: A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 01/2014, In : Journal of Materials Science. 49, 1, p. 461 1 p.

    Research output: Contribution to journalJournal article

  12. Published

    A novel concept to develop composite structures with isotropic negative Poisson's ratio: effects of random inclusions

    Hou, X., Hu, H. & Silberschmidt, V., 12/10/2012, In : Composites Science and Technology. 72, 15, p. 1848–1854 7 p.

    Research output: Contribution to journalJournal article

  13. Published

    A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation

    Hou, X., Hu, H. & Silberschmidt, V., 05/2012, In : Journal of Materials Science. 47, 9, p. 3989–3999 11 p.

    Research output: Contribution to journalJournal article

  14. Published

    Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure

    Hou, X., Acar, M. & Silberschmidt, V., 01/2011, In : Journal of Materials Science. 46, 2, p. 307–315 9 p.

    Research output: Contribution to journalJournal article

  15. Published

    Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points

    Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In : Computational Materials Science. 50, 4, p. 1292–1298 7 p.

    Research output: Contribution to journalJournal article

  16. Published

    Nonlinear compression behavior of warp-knitted spacer fabric: effect of sandwich structure

    Hou, X., Hu, H., Liu, Y. & Silberschmidt, V., 2011, In : Computers, Materials & Continua. 23, 2, p. 119-134 16 p.

    Research output: Contribution to journalJournal article

  17. Published

    2D finite element analysis of thermally bonded nonwoven materials: continuous and discontinuous models

    Hou, X., Acar, M. & Silberschmidt, V., 09/2009, In : Computational Materials Science. 46, 3, p. 700–707 8 p.

    Research output: Contribution to journalJournal article

  18. Published

    Tensile behaviour of low density thermally bonded nonwoven material

    Hou, X., Acar, M. & Silberschmidt, V., 2009, In : Journal of Engineered Fibres and Fabrics . 4, 1, p. 26-33 8 p.

    Research output: Contribution to journalJournal article

  19. Published

    A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In : Journal of Materials Science. 48, 24, p. 8493-8500 8 p.

    Research output: Contribution to journalJournal article

  20. Published

    Double lap adhesive joint with reduced stress concentration: effect of slot

    Hou, X., Yousefi Kanani, A. & Ye, J., 15/10/2018, In : Composite Structures. 202, p. 635-642 8 p.

    Research output: Contribution to journalJournal article

  21. Published

    Tensile behavior of low density thermally bonded nonwoven material

    Hou, X., Acar, M. & Silberschmidt, V. V., 20/04/2009, In : Journal of Engineered Fibers and Fabrics. 4, 1, p. 26-33 8 p.

    Research output: Contribution to journalJournal article

  22. Published
  23. Published

    A multi-scale model for studying failure mechanisms of composite wind turbine blades

    Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In : Composite Structures. 212, p. 220-229 10 p.

    Research output: Contribution to journalJournal article

  24. Published

    The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 1/06/2020, In : Composite Structures. 241, 10 p., 112136.

    Research output: Contribution to journalJournal article

  25. Published

    Fracture mechanisms of hybrid adhesive bonded joints: effects of the stiffness of constituents

    Yousefi Kanani, A., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 1/10/2020, In : International Journal of Adhesion and Adhesives . 102, 102649.

    Research output: Contribution to journalJournal article

  26. E-pub ahead of print

    A novel dissimilar single-lap joint with interfacial stiffness improvement

    Yousefi Kanani, A., Hou, X. & Ye, J., 30/07/2020, In : Composite Structures. 252, 11 p., 112741.

    Research output: Contribution to journalJournal article

  27. E-pub ahead of print

    The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 10/10/2020, In : Engineering Structures. 11 p., 111322.

    Research output: Contribution to journalJournal article

Back to top