Rights statement: This is the author’s version of a work that was accepted for publication in Materials Letters. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Materials Letters, 196, 2017 DOI: 10.1016/j.matlet.2017.03.100
Accepted author manuscript, 956 KB, PDF document
Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
Final published version
Research output: Contribution to Journal/Magazine › Journal article › peer-review
<mark>Journal publication date</mark> | 1/06/2017 |
---|---|
<mark>Journal</mark> | Materials Letters |
Volume | 196 |
Number of pages | 4 |
Pages (from-to) | 324-327 |
Publication Status | Published |
Early online date | 21/03/17 |
<mark>Original language</mark> | English |
A novel process is demonstrated which is able to produce porous structures with internal coatings. This is achieved using sacrificial porogens which are coated with a powder and which are then infiltrated by compression moulding using a molten polymer. The coating powder is transferred to the pore and multi-material or compositionally-gradient coatings are produced. The interconnectivity of the porous structure is reduced when the pores are coated, but can be increased by reducing the degree of powder coverage of the porogen.