Home > Research > Publications & Outputs > Energy and exergy analyses of a parabolic troug...

Electronic data

  • Authors_final_version

    Rights statement: This is the author’s version of a work that was accepted for publication in Energy Conversion and Management. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Energy Conversion and Management, 155, 2018 DOI: 10.1016/j.enconman.2017.10.059

    Accepted author manuscript, 3.99 MB, PDF document

    Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License

Links

Text available via DOI:

View graph of relations

Energy and exergy analyses of a parabolic trough collector operated with nanofluids for medium and high temperature applications

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published
  • Amine Allouhi
  • Benzakour Amine
  • Saidur Rahman
  • T. T. Kousksou
  • A. Jamil
Close
<mark>Journal publication date</mark>01/2018
<mark>Journal</mark>Energy Conversion and Management
Volume155
Number of pages17
Pages (from-to)201-217
Publication StatusPublished
Early online date13/11/17
<mark>Original language</mark>English

Abstract

Thermal performance of parabolic trough collectors (PTCs) can be improved by suspending nanoparticles into the traditionally used heat transfer fluids. In this work, a one-dimensional mathematical model is proposed to investigate the effect of various nanoprticles suspended in the working fluid for medium and high temperature PTCs. The major finding of this work is that the nanofluid enhances the thermal efficiency of the PTC slightly. High operating temperatures are more suitable for using nanofluids and generate higher relative gains of energy delivered. It is also found that the exergetic efficiency improvement is more important than energetic efficiency. The peak exergy efficiency is achieved by the CuO based nanofluid and is about 9.05%. The maximum daily relative gain of thermal energy delivered is found to be 1.46% by using 5% of Al2O3 in the base fluid. Optimal control of the operating conditions can lead to maximum energetic and exergetic performances of the PTC.

Bibliographic note

This is the author’s version of a work that was accepted for publication in Energy Conversion and Management. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Energy Conversion and Management, 155, 2018 DOI: 10.1016/j.enconman.2017.10.059