Home > Research > Publications & Outputs > Remediation of 137Cs Contaminated Concrete Usin...

Associated organisational unit

Electronic data

  • 1-s2.0-S030438941730506X-main

    Rights statement: This is the author’s version of a work that was accepted for publication in Journal of Hazardous Materials. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of Hazardous Materials, 340, 2017 DOI: 10.1016/j.jhazmat.2017.07.007

    Accepted author manuscript, 508 KB, PDF document

    Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License

Links

Text available via DOI:

View graph of relations

Remediation of 137Cs Contaminated Concrete Using Electrokinetic Phenomena and Ionic Salt Washes in Nuclear Energy Contexts

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published
<mark>Journal publication date</mark>15/10/2017
<mark>Journal</mark>Journal of Hazardous Materials
Volume340
Number of pages9
Pages (from-to)454-462
Publication StatusPublished
Early online date6/07/17
<mark>Original language</mark>English

Abstract

This work describes the first known the use of electrokinetic treatments and ionic salt washes to remediate concrete contaminated with 137Cs. A series of experiments were performed on concrete samples, contaminated with K+ and 137Cs, using a bespoke migration cell and an applied electric field (60 V potential gradient and current limit of 35 mA). Additionally, two samples were treated with an ionic salt wash (≤400 mol m−3 of KCl) alongside the electrokinetic treatment. The results show that the combined treatment produces removal efficiencies three times higher (>60%) than the electrokinetic treatment alone and that the decontamination efficiency appears to be proportional to the initial degree of contamination. Furthermore, the decontamination efficiencies are equivalent to previous electrokinetic studies that utilised hazardous chemical enhancement agents demonstrating the potential of the technique for use on nuclear licensed site. The results highlight the relationship between the initial contamination concentration within the concrete and achievable removal efficiency of electrokinetic treatment and other treatments. This information would be useful when selecting the most appropriate decontamination techniques for particular contamination scenarios.

Bibliographic note

This is the author’s version of a work that was accepted for publication in Journal of Hazardous Materials. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Journal of Hazardous Materials, 340, 2017 DOI: 10.1016/j.jhazmat.2017.07.007