Home > Research > Publications & Outputs > Robust aerodynamic design optimization of horiz...

Associated organisational unit

View graph of relations

Robust aerodynamic design optimization of horizontal axis wind turbines

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

Published
Close
Publication date2015
Host publicationAdvances in evolutionary and deterministic methods for design, optimization and control in engineering and sciences
EditorsDavid Greiner, Blas Galván, Jacques Periaux, Nicolas Gauger, Kyriakos Giannakoglou, Gabriel Winter
PublisherSpringer
Pages225-240
Number of pages16
ISBN (electronic)9783319115412
ISBN (print)3319115405, 9783319115405
<mark>Original language</mark>English

Publication series

NameComputational Methods in Applied Sciences
PublisherSpringer
Volume36
ISSN (Print)1871-3033

Abstract

The work reported in this paper deals with the development of a design system for the robust aerodynamic design optimization of horizontal axis wind turbine rotors. The system developed is here used to design a 126-m diameter, three-bladed rotor, featuring minimal sensitivity to uncertainty associated with blade manufacturing tolerances. In particular, the uncertainty affecting the rotor geometry is associated with the radial distributions of blade chord and twist, and the airfoil thickness. In this study, both geometric and operative design variables are treated as part of the optimization. Airfoil aerodynamics and rotor aeroelasticity are predicted by means of XFOIL and FAST codes, respectively, and a novel deterministic method, the Univariate Reduced Quadrature, is used for uncertainty propagation. The optimization is performed by means of a two-stage multi-objective evolution-based algorithm, aiming to maximize the rotor expected annual energy production and minimize its standard deviation. The design optimization is subjected to a single structural constrain associated with the maximum out-of-plane blade tip deflection. The results of this research highlight that a lower sensitivity to uncertainty tied to manufacturing tolerances can be achieved by lowering the angular speed of the rotor.