Home > Research > Publications & Outputs > Pressure drop and velocity simulations in non-s...
View graph of relations

Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing

Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

Published
Publication date12/2015
Number of pages8
<mark>Original language</mark>English
EventTesting, Characterisation and Filter Media 7: Conference, Exhibition and Training Course - Riverside Innovation Centre, Chester, United Kingdom
Duration: 30/11/20151/12/2015

Conference

ConferenceTesting, Characterisation and Filter Media 7: Conference, Exhibition and Training Course
Country/TerritoryUnited Kingdom
CityChester
Period30/11/151/12/15

Abstract

This research utilises additive manufacturing technology to fabricate filter mesh designed with non-stochastic lattice structures. Disc filters with 1-layer, 2-layer and 3-layer thicknesses of repeated 1.8 mm lattice unit cell as the filter mesh are modelled in SolidWorks. Computational Fluid Dynamic (CFD) simulation using ANSYS CFX is performed at eight different flow rates (250 lit/min, 270 lit/min, 290 lit/min, 310 lit/min, 330 lit/min, 350 lit/min, 370 lit/min and 390 lit/min) and the results (pressure drop and velocity) are analysed. Simulations are also done for perforated plates with circular-shaped and square-shaped holes with the same aperture size for benchmarking purposes. The outcomes indicate that the pressure drop of the lattice filters is noticeably lower than the perforated plates’. These findings show that several layers of lattice structure could be stacked together as filter mesh to increase filtration efficiency with minimal pressure drop and to create a more tortuous path for the fluid.