Home > Research > Publications & Outputs > Analysis of unimorph piezoceramic patches on da...

Links

Text available via DOI:

View graph of relations

Analysis of unimorph piezoceramic patches on damped square shaped plate

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published

Standard

Analysis of unimorph piezoceramic patches on damped square shaped plate. / Ali Mokhtar, Najib; Jafar, Fairul Azni; Bani Hashim, Ahmad Yusairi et al.
In: Applied Mechanics and Materials, Vol. 315, 2013, p. 965-971.

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Harvard

Ali Mokhtar, N, Jafar, FA, Bani Hashim, AY, Hasib, H & Muhammad, MN 2013, 'Analysis of unimorph piezoceramic patches on damped square shaped plate', Applied Mechanics and Materials, vol. 315, pp. 965-971. https://doi.org/10.4028/www.scientific.net/AMM.315.965

APA

Ali Mokhtar, N., Jafar, F. A., Bani Hashim, A. Y., Hasib, H., & Muhammad, M. N. (2013). Analysis of unimorph piezoceramic patches on damped square shaped plate. Applied Mechanics and Materials, 315, 965-971. https://doi.org/10.4028/www.scientific.net/AMM.315.965

Vancouver

Ali Mokhtar N, Jafar FA, Bani Hashim AY, Hasib H, Muhammad MN. Analysis of unimorph piezoceramic patches on damped square shaped plate. Applied Mechanics and Materials. 2013;315:965-971. doi: 10.4028/www.scientific.net/AMM.315.965

Author

Ali Mokhtar, Najib ; Jafar, Fairul Azni ; Bani Hashim, Ahmad Yusairi et al. / Analysis of unimorph piezoceramic patches on damped square shaped plate. In: Applied Mechanics and Materials. 2013 ; Vol. 315. pp. 965-971.

Bibtex

@article{62c91babd9394a09a4c921755d1eacbe,
title = "Analysis of unimorph piezoceramic patches on damped square shaped plate",
abstract = "Active damping using piezoelectric element is one of the effective techniques to counter vibration problems. A 3D finite-element model is developed as part of investigation for damping control. The piezoelectric patches are surface bonded on quadrilateral thin plate and supported with spring damper elements. The main goal of this paper is to investigate mechanical characteristics of piezoceramic array on membrane and the effect of force excitation using small motor and electric excitation on the system. The system setup produced small vibration displacement and does not displace the plate beyond elastic strain region. The results show the linear behavior of piezoceramic and the correlation between electric excitation, motor vibration and displacement at the centre of the plate at different frequency range. The mode shapes and natural frequencies at low frequency spectrum are also presented. Therefore, the results can be used as reference to develop damping system with aid of piezoelectric patches.",
author = "{Ali Mokhtar}, Najib and Jafar, {Fairul Azni} and {Bani Hashim}, {Ahmad Yusairi} and Hazman Hasib and Muhammad, {Mohd Nazrin}",
note = "A.M.M. Najib, A.J. Fairul, Finite element analysis of plate structure excited by patches of piezoelectric actuators, Proceedings of Malaysian Technical Universities International Conference on Engineering and Technology, (2011) 834-838. Y. Yaman, T. Caliskan, V. Nalbantoglu, E. Prasad and D. Waechter , Active vibration control of a smart plate, ICAS 2002 Congress, (2002). L. Young-Hun, Finite-element simulation of closed loop vibration control of a smart plate under transient loading, Smart Materials and Structures 12 (2) (2003) 272-286. A. Joshi and S.M. Khot, Smart actuator effectiveness improvement through modal Analysis, VETOMAC-3 and ACSIM 2004 International Conference (2004)142-150. D. Halim and S.O.R. Moheimani, An optimization approach to optimal placement of collocated piezoelectric actuators and sensors on a thin plate, Mechatronics 13 (2003) 27-47. G.P. Gibbs and C.R. Fuller, Excitation of thin beams using asymmetric piezoelectric actuators, Journal of the Acoustical Society of America 92 (6) (1992) 3221-3227. C.R. Fuller, S.J. Elliot and P.A. Nelson, Active control of vibration, 1st ed., Academic Press, 1996. H. Karag{\"u}lle, L. Malgaca, H.F. {\"O}ktem, Analysis of active vibration control in smart structures by ANSYS, Smart Material and Structure 13 (2004) 661-667. M.W. Al Hazmi, Finite Element Analysis of cantilever structure excited by patches of piezoelectric actuators, 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) (2008) 809-814. M.S. Kozien, B. Koltowski, Comparison of active and passive damping of plate vibration by piezoelectric actuators-FEM Simulaton, Acoustic and Biomedical Engineering 119 (2011). Z. Gosiewski, A.P. Koszewnik, Fast prototyping method for the active vibration damping system of mechanical structures, Mechanical Systems and Signal Processing (2012). ",
year = "2013",
doi = "10.4028/www.scientific.net/AMM.315.965",
language = "English",
volume = "315",
pages = "965--971",
journal = "Applied Mechanics and Materials",
issn = "1660-9336",
publisher = "Trans Tech Publications",

}

RIS

TY - JOUR

T1 - Analysis of unimorph piezoceramic patches on damped square shaped plate

AU - Ali Mokhtar, Najib

AU - Jafar, Fairul Azni

AU - Bani Hashim, Ahmad Yusairi

AU - Hasib, Hazman

AU - Muhammad, Mohd Nazrin

N1 - A.M.M. Najib, A.J. Fairul, Finite element analysis of plate structure excited by patches of piezoelectric actuators, Proceedings of Malaysian Technical Universities International Conference on Engineering and Technology, (2011) 834-838. Y. Yaman, T. Caliskan, V. Nalbantoglu, E. Prasad and D. Waechter , Active vibration control of a smart plate, ICAS 2002 Congress, (2002). L. Young-Hun, Finite-element simulation of closed loop vibration control of a smart plate under transient loading, Smart Materials and Structures 12 (2) (2003) 272-286. A. Joshi and S.M. Khot, Smart actuator effectiveness improvement through modal Analysis, VETOMAC-3 and ACSIM 2004 International Conference (2004)142-150. D. Halim and S.O.R. Moheimani, An optimization approach to optimal placement of collocated piezoelectric actuators and sensors on a thin plate, Mechatronics 13 (2003) 27-47. G.P. Gibbs and C.R. Fuller, Excitation of thin beams using asymmetric piezoelectric actuators, Journal of the Acoustical Society of America 92 (6) (1992) 3221-3227. C.R. Fuller, S.J. Elliot and P.A. Nelson, Active control of vibration, 1st ed., Academic Press, 1996. H. Karagülle, L. Malgaca, H.F. Öktem, Analysis of active vibration control in smart structures by ANSYS, Smart Material and Structure 13 (2004) 661-667. M.W. Al Hazmi, Finite Element Analysis of cantilever structure excited by patches of piezoelectric actuators, 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) (2008) 809-814. M.S. Kozien, B. Koltowski, Comparison of active and passive damping of plate vibration by piezoelectric actuators-FEM Simulaton, Acoustic and Biomedical Engineering 119 (2011). Z. Gosiewski, A.P. Koszewnik, Fast prototyping method for the active vibration damping system of mechanical structures, Mechanical Systems and Signal Processing (2012).

PY - 2013

Y1 - 2013

N2 - Active damping using piezoelectric element is one of the effective techniques to counter vibration problems. A 3D finite-element model is developed as part of investigation for damping control. The piezoelectric patches are surface bonded on quadrilateral thin plate and supported with spring damper elements. The main goal of this paper is to investigate mechanical characteristics of piezoceramic array on membrane and the effect of force excitation using small motor and electric excitation on the system. The system setup produced small vibration displacement and does not displace the plate beyond elastic strain region. The results show the linear behavior of piezoceramic and the correlation between electric excitation, motor vibration and displacement at the centre of the plate at different frequency range. The mode shapes and natural frequencies at low frequency spectrum are also presented. Therefore, the results can be used as reference to develop damping system with aid of piezoelectric patches.

AB - Active damping using piezoelectric element is one of the effective techniques to counter vibration problems. A 3D finite-element model is developed as part of investigation for damping control. The piezoelectric patches are surface bonded on quadrilateral thin plate and supported with spring damper elements. The main goal of this paper is to investigate mechanical characteristics of piezoceramic array on membrane and the effect of force excitation using small motor and electric excitation on the system. The system setup produced small vibration displacement and does not displace the plate beyond elastic strain region. The results show the linear behavior of piezoceramic and the correlation between electric excitation, motor vibration and displacement at the centre of the plate at different frequency range. The mode shapes and natural frequencies at low frequency spectrum are also presented. Therefore, the results can be used as reference to develop damping system with aid of piezoelectric patches.

U2 - 10.4028/www.scientific.net/AMM.315.965

DO - 10.4028/www.scientific.net/AMM.315.965

M3 - Journal article

VL - 315

SP - 965

EP - 971

JO - Applied Mechanics and Materials

JF - Applied Mechanics and Materials

SN - 1660-9336

ER -