Home > Research > Publications & Outputs > Design and fabrication of double corrugated wav...

Research

Associated organisational units

Electronic data

  • IVEC2016_Ka_band_TWT_final

    Rights statement: ©2016 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

    Accepted author manuscript, 2.02 MB, PDF document

    Available under license: CC BY: Creative Commons Attribution 4.0 International License

Links

Text available via DOI:

Keywords

View graph of relations

Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Published
  • Claudio Paoloni
  • Mauro Mineo
  • Luke Busnell
  • Mat Beardsley
  • Manju Henry
  • Peter G. Huggard
Close
More...
Publication date19/04/2016
Host publicationProceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016)
PublisherIEEE
Number of pages2
ISBN (print)9781467392174
<mark>Original language</mark>English

Abstract

The double corrugated waveguide is demonstrated to be a slow wave structure which is straightforward to manufacture and assemble. The design and fabrication of a Ka-band prototype is presented. The ability of the double corrugated waveguide to be bent through 90o has permitted the build of a compact slow wave structure with very good electrical behavior which is suitable for millimeter wave travelling wave tubes.

Bibliographic note

©2016 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.