Home > Research > Publications & Outputs > Design and fabrication of double corrugated wav...

Research

Associated organisational units

Electronic data

  • IVEC2016_Ka_band_TWT_final

    Rights statement: ©2016 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

    Accepted author manuscript, 2.02 MB, PDF document

    Available under license: CC BY: Creative Commons Attribution 4.0 International License

Links

Text available via DOI:

Keywords

View graph of relations

Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Published

Standard

Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube. / Paoloni, Claudio; Mineo, Mauro; Busnell, Luke et al.
Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE, 2016.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Harvard

Paoloni, C, Mineo, M, Busnell, L, Beardsley, M, Henry, M & Huggard, PG 2016, Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube. in Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE. https://doi.org/10.1109/IVEC.2016.7561844

APA

Paoloni, C., Mineo, M., Busnell, L., Beardsley, M., Henry, M., & Huggard, P. G. (2016). Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube. In Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016) IEEE. https://doi.org/10.1109/IVEC.2016.7561844

Vancouver

Paoloni C, Mineo M, Busnell L, Beardsley M, Henry M, Huggard PG. Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube. In Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE. 2016 doi: 10.1109/IVEC.2016.7561844

Author

Paoloni, Claudio ; Mineo, Mauro ; Busnell, Luke et al. / Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube. Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE, 2016.

Bibtex

@inproceedings{c09e29761146475c8f038b981538b3a3,
title = "Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube",
abstract = "The double corrugated waveguide is demonstrated to be a slow wave structure which is straightforward to manufacture and assemble. The design and fabrication of a Ka-band prototype is presented. The ability of the double corrugated waveguide to be bent through 90o has permitted the build of a compact slow wave structure with very good electrical behavior which is suitable for millimeter wave travelling wave tubes.",
keywords = "traveling wave tube, double corrugated waveguide, sws, TWT, Ka-band",
author = "Claudio Paoloni and Mauro Mineo and Luke Busnell and Mat Beardsley and Manju Henry and Huggard, {Peter G.}",
note = "{\textcopyright}2016 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. ",
year = "2016",
month = apr,
day = "19",
doi = "10.1109/IVEC.2016.7561844",
language = "English",
isbn = "9781467392174",
booktitle = "Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016)",
publisher = "IEEE",

}

RIS

TY - GEN

T1 - Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube

AU - Paoloni, Claudio

AU - Mineo, Mauro

AU - Busnell, Luke

AU - Beardsley, Mat

AU - Henry, Manju

AU - Huggard, Peter G.

N1 - ©2016 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

PY - 2016/4/19

Y1 - 2016/4/19

N2 - The double corrugated waveguide is demonstrated to be a slow wave structure which is straightforward to manufacture and assemble. The design and fabrication of a Ka-band prototype is presented. The ability of the double corrugated waveguide to be bent through 90o has permitted the build of a compact slow wave structure with very good electrical behavior which is suitable for millimeter wave travelling wave tubes.

AB - The double corrugated waveguide is demonstrated to be a slow wave structure which is straightforward to manufacture and assemble. The design and fabrication of a Ka-band prototype is presented. The ability of the double corrugated waveguide to be bent through 90o has permitted the build of a compact slow wave structure with very good electrical behavior which is suitable for millimeter wave travelling wave tubes.

KW - traveling wave tube

KW - double corrugated waveguide

KW - sws

KW - TWT

KW - Ka-band

U2 - 10.1109/IVEC.2016.7561844

DO - 10.1109/IVEC.2016.7561844

M3 - Conference contribution/Paper

SN - 9781467392174

BT - Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016)

PB - IEEE

ER -