Home > Research > Publications & Outputs > Design of Slow Wave Structure for G-band TWT fo...

Electronic data

  • PID5788641

    Rights statement: ©2019 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

    Accepted author manuscript, 363 KB, PDF document

    Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License

Links

Text available via DOI:

View graph of relations

Design of Slow Wave Structure for G-band TWT for High Data Rate Links

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

Published
NullPointerException

Abstract

The need of high data rate can be satisfied only by wide frequency bands in the millimetre wave region. This paper presents the design of a G-band (215 – 250 GHz) Traveling Wave Tube with 40 dB gain for wireless communications, based on the double corrugated waveguide.
The structure of the TWT is based on a single section, instead of the typical configuration of two sections with a sever used at microwave frequency. This is possible due to the high losses at those frequency that permit a stable behaviour. This paper reports both cold and hot simulations.

Bibliographic note

©2019 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.