TY - CONF

T1 - Digital fast neutron radiography of rebar in concrete

AU - Mitton, Katie

AU - Jones, Ashley Richard

AU - Joyce, Malcolm

PY - 2014

Y1 - 2014

N2 - Neutron imaging has previously been used in order to test for cracks, degradation and water content in concrete. However, these techniques often fall short of alternative non-destructive testing methods, such as gamma-ray and X-ray imaging, particularly in terms of resolution. Further, thermal neutron techniques can be compromised by the significant expense associated with thermal neutron sources of sufficient intensity to yield satisfactory results that can often precipitate the need for a reactor. Such embodiments are clearly not portable in the context of the needs of field applications.This paper summarises the results of a study to investigate the potential for transmission radiography based on fast neutrons. The objective of this study was to determine whether the presence of heterogeneities in concrete structures, such as reinforcement structures, could be identified on the basis of variation in transmitted fast-neutron flux between structures containing different materials. Monte Carlo simulations have been performed and the results from these are compared to those arising from practical tests using a 252Cf source. The experimental data have been acquired in real-time using a digital pulse-shape discrimination system that enables fast neutron transmission to be studied across an array of liquid scintillators placed in close proximity to samples under test, and read out in real time. This approach could offer non-destructive testing methods that give less dose, better transportability and better accessibility than competing methods. It is also suitable for thick samples where gamma-ray and X-ray methods can be limited.

AB - Neutron imaging has previously been used in order to test for cracks, degradation and water content in concrete. However, these techniques often fall short of alternative non-destructive testing methods, such as gamma-ray and X-ray imaging, particularly in terms of resolution. Further, thermal neutron techniques can be compromised by the significant expense associated with thermal neutron sources of sufficient intensity to yield satisfactory results that can often precipitate the need for a reactor. Such embodiments are clearly not portable in the context of the needs of field applications.This paper summarises the results of a study to investigate the potential for transmission radiography based on fast neutrons. The objective of this study was to determine whether the presence of heterogeneities in concrete structures, such as reinforcement structures, could be identified on the basis of variation in transmitted fast-neutron flux between structures containing different materials. Monte Carlo simulations have been performed and the results from these are compared to those arising from practical tests using a 252Cf source. The experimental data have been acquired in real-time using a digital pulse-shape discrimination system that enables fast neutron transmission to be studied across an array of liquid scintillators placed in close proximity to samples under test, and read out in real time. This approach could offer non-destructive testing methods that give less dose, better transportability and better accessibility than competing methods. It is also suitable for thick samples where gamma-ray and X-ray methods can be limited.

M3 - Conference paper

T2 - 10th International Conference on Position Sensitive Detectors

Y2 - 8 September 2014 through 12 September 2014

ER -