Home > Research > Publications & Outputs > Effect of back wood choice on the perceived qua...

Electronic data

  • JASA-03561_R1

    Accepted author manuscript, 3.12 MB, PDF document

    Available under license: CC BY: Creative Commons Attribution 4.0 International License

Links

Text available via DOI:

View graph of relations

Effect of back wood choice on the perceived quality of steel-string acoustic guitars

Research output: Contribution to journalJournal article

Published
Close
<mark>Journal publication date</mark>27/12/2018
<mark>Journal</mark>Journal of the Acoustical Society of America
Issue number6
Volume144
Number of pages15
Pages (from-to)3533-3547
Publication statusPublished
Original languageEnglish

Abstract

Some of the most prized woods used for the backs and sides of acoustic guitars are expensive, rare, and from unsustainable sources. It is unclear to what extent back woods contribute to the sound and playability qualities of acoustic guitars. Six steel-string acoustic guitars were built for this study to the same design and material specifications except for the back/side plates which were made of woods varying widely in availability and price (Brazilian rosewood, Indian rosewood, mahogany, maple, sapele, and walnut). Bridge-admittance measurements revealed small differences between the modal properties of the guitars which could be largely attributed to residual manufacturing variability rather than to the back/side plates. Overall sound quality ratings, given by 52 guitarists in a dimly lit room while wearing welder's goggles to prevent visual identification, were very similar between the six guitars. The results of a blinded ABX discrimination test, performed by another subset of 31 guitarists, indicate that guitarists could not easily distinguish the guitars by their sound or feel. Overall, the results suggest that the species of wood used for the back and sides of a steel-string acoustic guitar has only a marginal impact on its body mode properties and perceived sound.