TY - JOUR

T1 - High-resolution analysis of polyacrylamide gels for trace metals in two dimensions using diffusive gradients in thin-films (DGT) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS).

AU - Warnken, Kent W.

AU - Zhang, Hao

AU - Davison, William

PY - 2004/10/15

Y1 - 2004/10/15

N2 - A simple method for the analysis of polyacrylamide diffusive gradients in thin film (DGT) gels by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS), employing a novel use of 115In internal standardization, has been developed. This method allows the determination of Co, Ni, Cu, Zn, Cd, and Pb concentrations (at the DGT filter face) or fluxes in sediments at a spatial resolution of 100 μm. Single-layered gels, using an optimized laser defocus of 4000 μm at 400 mJ power, showed high precision (generally 10%) and a linear response during solution deployment. Of the elements Sc, In, Ba, La, Ce, and Tb, Ba most closely tracked variations in laser energy and showed the highest analytical precision but could not be used as an internal standard due to its elevated presence in natural sediments. Therefore, internal standardization, necessary to normalize data collected on different days, was carried out using 115In contained within a second layer of backing gel and dried along with the analyte layer as a dual-gel disk. This multilayered gel standard required a laser defocus setting of 1000 μm and a laser power of 800 mJ. Analytical precision for a 64-spot ablation grid at 100-μm spacing was 10%. Verification of this method was carried out on DGT sediment probes deployed in Priest Pot (English Lake District). Results obtained by conventional slicing techniques and aqueous elution agreed with laser ablation results when the different sampling areas were considered. The elution results varied by a factor of <2, whereas the laser ablation technique showed a variability of 4, indicating localized elevated concentrations of Co. This higher resolution LA-ICPMS method could ultimately lead to an improved understanding of the geochemical processes responsible for metal uptake and release in sediments.

AB - A simple method for the analysis of polyacrylamide diffusive gradients in thin film (DGT) gels by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS), employing a novel use of 115In internal standardization, has been developed. This method allows the determination of Co, Ni, Cu, Zn, Cd, and Pb concentrations (at the DGT filter face) or fluxes in sediments at a spatial resolution of 100 μm. Single-layered gels, using an optimized laser defocus of 4000 μm at 400 mJ power, showed high precision (generally 10%) and a linear response during solution deployment. Of the elements Sc, In, Ba, La, Ce, and Tb, Ba most closely tracked variations in laser energy and showed the highest analytical precision but could not be used as an internal standard due to its elevated presence in natural sediments. Therefore, internal standardization, necessary to normalize data collected on different days, was carried out using 115In contained within a second layer of backing gel and dried along with the analyte layer as a dual-gel disk. This multilayered gel standard required a laser defocus setting of 1000 μm and a laser power of 800 mJ. Analytical precision for a 64-spot ablation grid at 100-μm spacing was 10%. Verification of this method was carried out on DGT sediment probes deployed in Priest Pot (English Lake District). Results obtained by conventional slicing techniques and aqueous elution agreed with laser ablation results when the different sampling areas were considered. The elution results varied by a factor of <2, whereas the laser ablation technique showed a variability of 4, indicating localized elevated concentrations of Co. This higher resolution LA-ICPMS method could ultimately lead to an improved understanding of the geochemical processes responsible for metal uptake and release in sediments.

U2 - 10.1021/ac0400358

DO - 10.1021/ac0400358

M3 - Journal article

VL - 76

SP - 6077

EP - 6084

JO - Analytical Chemistry

JF - Analytical Chemistry

SN - 0003-2700

IS - 20

ER -