Home > Research > Publications & Outputs > Low-level measurements of DC voltages using a S...

Research

Associated organisational units

Links

Text available via DOI:

View graph of relations

Low-level measurements of DC voltages using a SQUID

Research output: Contribution to Journal/Magazine › Journal article › peer-review

Published

Standard

Low-level measurements of DC voltages using a SQUID. / Guénault, Tony; Dee, R.H.; Pickett, George.
In: Journal of Physics E: Scientific Instruments, Vol. 9, No. 10, 1976, p. 807-809.

Research output: Contribution to Journal/Magazine › Journal article › peer-review

Harvard

Guénault, T, Dee, RH & Pickett, G 1976, 'Low-level measurements of DC voltages using a SQUID', Journal of Physics E: Scientific Instruments, vol. 9, no. 10, pp. 807-809. https://doi.org/10.1088/0022-3735/9/10/004

APA

Guénault, T., Dee, R. H., & Pickett, G. (1976). Low-level measurements of DC voltages using a SQUID. Journal of Physics E: Scientific Instruments, 9(10), 807-809. https://doi.org/10.1088/0022-3735/9/10/004

Vancouver

Guénault T, Dee RH, Pickett G. Low-level measurements of DC voltages using a SQUID. Journal of Physics E: Scientific Instruments. 1976;9(10):807-809. doi: 10.1088/0022-3735/9/10/004

Author

Guénault, Tony ; Dee, R.H. ; Pickett, George. / Low-level measurements of DC voltages using a SQUID. In: Journal of Physics E: Scientific Instruments. 1976 ; Vol. 9, No. 10. pp. 807-809.

Bibtex

@article{a65f7ff55e714110bf3f58bdf823d75f,
title = "Low-level measurements of DC voltages using a SQUID",
abstract = "The input circuitry of a SQUID voltmeter system has been modified by using a shorted signal coil which acts as a low-pass filter with a cut-off frequency of less than 1 Hz. This enables the SQUID to be used under adverse noise conditions in order to measure voltages generated in an unscreened sample. The incorporation of a superconducting switch is also described which enables sample voltages to be isolated without changes in the applied conditions. The frequency response of the low-pass filter is measured in the magnetometer mode.",
author = "Tony Gu{\'e}nault and R.H. Dee and George Pickett",
year = "1976",
doi = "10.1088/0022-3735/9/10/004",
language = "English",
volume = "9",
pages = "807--809",
journal = "Journal of Physics E: Scientific Instruments",
issn = "0022-3735",
publisher = "Institute of Physics and the Physical Society",
number = "10",

}

RIS

TY - JOUR

T1 - Low-level measurements of DC voltages using a SQUID

AU - Guénault, Tony

AU - Dee, R.H.

AU - Pickett, George

PY - 1976

Y1 - 1976

N2 - The input circuitry of a SQUID voltmeter system has been modified by using a shorted signal coil which acts as a low-pass filter with a cut-off frequency of less than 1 Hz. This enables the SQUID to be used under adverse noise conditions in order to measure voltages generated in an unscreened sample. The incorporation of a superconducting switch is also described which enables sample voltages to be isolated without changes in the applied conditions. The frequency response of the low-pass filter is measured in the magnetometer mode.

AB - The input circuitry of a SQUID voltmeter system has been modified by using a shorted signal coil which acts as a low-pass filter with a cut-off frequency of less than 1 Hz. This enables the SQUID to be used under adverse noise conditions in order to measure voltages generated in an unscreened sample. The incorporation of a superconducting switch is also described which enables sample voltages to be isolated without changes in the applied conditions. The frequency response of the low-pass filter is measured in the magnetometer mode.

U2 - 10.1088/0022-3735/9/10/004

DO - 10.1088/0022-3735/9/10/004

M3 - Journal article

VL - 9

SP - 807

EP - 809

JO - Journal of Physics E: Scientific Instruments

JF - Journal of Physics E: Scientific Instruments

SN - 0022-3735

IS - 10

ER -