Home > Research > Publications & Outputs > Modeling and analysis of secondary sources coup...

Electronic data

  • 17_mech_active_sound

    Rights statement: This is the author’s version of a work that was accepted for publication in Mechanical Systems and Signal Processing. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Mechanical Systems and Signal Processing, 95, 2017 DOI: 10.1016/j.ymssp.2017.03.025

    Accepted author manuscript, 911 KB, PDF document

    Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License

Links

Text available via DOI:

View graph of relations

Modeling and analysis of secondary sources coupling for active sound field reduction in confined spaces

Research output: Contribution to journalJournal article

Published
<mark>Journal publication date</mark>10/2017
<mark>Journal</mark>Mechanical Systems and Signal Processing
Volume95
Number of pages24
Pages (from-to)286-309
Publication statusPublished
Early online date5/04/17
Original languageEnglish

Abstract

This article addresses the coupling of acoustic secondary sources in a confined space in a sound field reduction framework. By considering the coupling of sources in a rectangular enclosure, the set of coupled equations governing its acoustical behavior are solved. The model obtained in this way is used to analyze the behavior of multi-input multi-output (MIMO) active sound field control (ASC) systems, where the coupling of sources cannot be neglected. In particular, the article develops the analytical results to analyze the effect of coupling of an array of secondary sources on the sound pressure levels inside an enclosure, when an array of microphones is used to capture the acoustic characteristics of the enclosure. The results are supported by extensive numerical simulations showing how coupling of loudspeakers through acoustic modes of the enclosure will change the strength and hence the driving voltage signal applied to the secondary loudspeakers. The practical significance of this model is to provide a better insight on the performance of the sound reproduction/reduction systems in confined spaces when an array of loudspeakers and microphones are placed in a fraction of wavelength of the excitation signal to reduce/reproduce the sound field. This is of particular importance because the interaction of different sources affects their radiation impedance depending on the electromechanical properties of the loudspeakers.

Bibliographic note

This is the author’s version of a work that was accepted for publication in Mechanical Systems and Signal Processing. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Mechanical Systems and Signal Processing, 95, 2017 DOI: 10.1016/j.ymssp.2017.03.025