Research output: Contribution to Journal/Magazine › Journal article › peer-review
Research output: Contribution to Journal/Magazine › Journal article › peer-review
}
TY - JOUR
T1 - Nonlinear detection of ultrasonic vibration of AFM cantilevers in and out of contact with the sample.
AU - Kolosov, Oleg
AU - Briggs, G. A. D.
AU - Cuberes, M. T.
N1 - A new way of delivering ultrasonic vibration via AFM cantilever was developed leading to the effective realization of the contact and non-contact detection of short time scale (microsecond to sub-nanosecond) physical phenomena in scanned probe microscopy. RAE_import_type : Journal article RAE_uoa_type : Physics
PY - 2001/3
Y1 - 2001/3
N2 - Ultrasonic vibration can be nonlinearly detected by means of an atomic force microscopy cantilever when the tip is in contact with a sample surface owing to the so-called (sample-induced) ultrasonic force. The procedure has been developed as a novel technique, ultrasonic force microscopy (UFM), that provides information about the nanoscale elastic and adhesive properties of surfaces. Here, we compare differences in the UFM signal when ultrasound is excited from the back of the sample (sample UFM) and from the cantilever base (waveguide UFM). UFM relies on the nonlinear ultrasound-induced cantilever displacement (due to the aforementioned ultrasonic force), and does not monitor the linear high-frequency vibration of the cantilever. In this paper, we discuss the influence of a linear high-frequency cantilever response in the UFM measurements and provide experimental evidence of the feasibility of nonlinearly detecting the free ultrasonic cantilever vibration when the tip is out of contact with the sample surface using the typical laser-beam deflection method for monitoring cantilever displacements.
AB - Ultrasonic vibration can be nonlinearly detected by means of an atomic force microscopy cantilever when the tip is in contact with a sample surface owing to the so-called (sample-induced) ultrasonic force. The procedure has been developed as a novel technique, ultrasonic force microscopy (UFM), that provides information about the nanoscale elastic and adhesive properties of surfaces. Here, we compare differences in the UFM signal when ultrasound is excited from the back of the sample (sample UFM) and from the cantilever base (waveguide UFM). UFM relies on the nonlinear ultrasound-induced cantilever displacement (due to the aforementioned ultrasonic force), and does not monitor the linear high-frequency vibration of the cantilever. In this paper, we discuss the influence of a linear high-frequency cantilever response in the UFM measurements and provide experimental evidence of the feasibility of nonlinearly detecting the free ultrasonic cantilever vibration when the tip is out of contact with the sample surface using the typical laser-beam deflection method for monitoring cantilever displacements.
U2 - 10.1088/0957-4484/12/1/310
DO - 10.1088/0957-4484/12/1/310
M3 - Journal article
VL - 12
SP - 53
EP - 59
JO - Nanotechnology
JF - Nanotechnology
SN - 0957-4484
IS - 1
ER -