Home > Research > Publications & Outputs > Numerical design of Novel Composite risers for ...

Research

Associated organisational units

Electronic data

  • PGR Research Conference_Victor_July 2018

    Final published version, 15.4 MB, application/octet-stream

    Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License

  • PGR Conference 2018-Final Timetable V2 for Students

    Final published version, 30.4 KB, application/vnd.openxmlformats-officedocument.spreadsheetml.sheet

    Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License

  • Abstracts July 2018 V2

    Final published version, 1.19 MB, PDF document

    Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License

Keywords

View graph of relations

Numerical design of Novel Composite risers for deep water applications

Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Published
Publication date5/05/2018
<mark>Original language</mark>English
EventLancaster University Engineering PGR Conference - Lancaster University, Lancaster, United Kingdom
Duration: 4/07/2018 → 5/07/2018

Conference

ConferenceLancaster University Engineering PGR Conference
Country/TerritoryUnited Kingdom
CityLancaster
Period4/07/18 → 5/07/18

Abstract

Due to recent challenges in oil exploration, there has been an increase in oil exploration from shallow waters to deep waters. This requires more length of the risers and thus an increase in the weight of the risers on the offshore structure. Risers are conduits which are used to transport fluid from the oil well to the offshore platform of transport vessel. The application of composites in riser design is to harness the properties of composites. This includes the reduction in the weight of the structure, and to improve the material behaviour. Submarine hoses are also a type of risers that are connected to buoys and other offshore structures but have short service periods. The design for some load cases on the composite riser is presented.