Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. 2021
  2. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to journalJournal articlepeer-review

  3. Published

    Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact

    Wang, X-E., Huang, X-H., Yang, J., Hou, X., Zhu, Y. & Xie, D., 15/09/2021, In: International Journal of Mechanical Sciences. 206, 20 p., 106613.

    Research output: Contribution to journalJournal articlepeer-review

  4. Published

    2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization

    Chi, Y., Huang, B., Saafi, M., Fullwood, N., Lambert, C., Whale, E., Hepworth, D. & Ye, J., 13/09/2021, In: Construction and Building Materials. 299, 23 p., 123867.

    Research output: Contribution to journalJournal articlepeer-review

  5. E-pub ahead of print

    Microstructures and mechanical properties of reduced activation ferritic/martensitic steel fabricated by laser melting deposition

    Feng, J., Zhang, P., Jia, Z., Yu, Z., Fang, C., Yan, H., Shi, H. & Tian, Y., 31/12/2021, In: Fusion Engineering and Design. 173, 12 p., 112865.

    Research output: Contribution to journalJournal articlepeer-review

  6. E-pub ahead of print

    A clean energy source: Assessing the energy potential of retrofitting the European hydropower fleet

    Quaranta, E., Aggidis, G., Boes, R., Comoglio, C., De Michele, C., Ritesh Patro, E., Georgievskaia, E., Harby, A., Kougias, I., Muntean, S., Pérez-Díaz, J., Romero–Gomez, P., Rosa-Clot, M., Schleiss, A., Vagnoni, E., Wirth, M. & Pistocchi, A., 15/10/2021, In: Energy Conversion and Management. 246, 15 p., 114655.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    A Case Study of Fractional-Order Control

    Alarfaj, Y., 1/09/2021, Lancaster University. 179 p.

    Research output: ThesisDoctoral Thesis

  8. Published

    A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts

    Farooqi, A. S., Yusuf, M., Mohd Zabidi, N. A., Saidur, R., Sanaullah, K., Khan, A. & Abdullah, B., 1/09/2021, In: International Journal of Hydrogen Energy. 46, 60, p. 31024-31040 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  9. E-pub ahead of print

    Escherichia coli as an antibody expression host for the production of diagnostic proteins: significance and expression

    Huleani, S., Roberts, M. R., Beales, L. & Papaioannou, E. H., 1/09/2021, In: Critical Reviews in Biotechnology.

    Research output: Contribution to journalJournal articlepeer-review

  10. Published

    Machine learnt prediction method for rain erosion damage on wind turbine blades

    Castorrini, A., Venturini, P., Corsini, A. & Rispoli, F., 31/08/2021, In: Wind Energy. 24, 8, p. 917-934 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Radiation Sensing: Design and Deployment of Sensors and Detectors

    Gamage, K. A. A. (ed.) & Taylor, C. J. (ed.), 31/08/2021, Multidisciplinary Digital Publishing Institute (MDPI). 101 p.

    Research output: Book/Report/ProceedingsBook

  12. Published

    Different Approaches for Manufacturing Ti-6Al-4V Alloy with Triply Periodic Minimal Surface Sheet-Based Structures by Electron Beam Melting

    Khrapov, D., Kozadayeva, M., Manabaev, K., Panin, A., Sjöström, W., Koptyug, A., Mishurova, T., Evsevleev, S., Meinel, D., Bruno, G., Cheneler, D., Surmenev, R. & Surmeneva, M., 29/08/2021, In: Materials. 14, 17, 21 p., 4912.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    Alkaline wood ash, turbulence, and traps with excess of sulfuric acid do not strip completely the ammonia off an agro-waste digestate

    Moure Abelenda, A., Semple, K., Lag Brotons, A., Herbert, B., Aggidis, G. & Aiouache, F., 28/08/2021, In: Edelweiss Chemical Science Journal. 4, 1, p. 19-24 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  14. Published

    Short-Term Solar Irradiance Forecasting Model Based on Bidirectional Long Short-Term Memory Deep Learning

    Alharbi, F. & Csala, D., 27/08/2021, 2021 International Conference on Electrical, Communication, and Computer Engineering (ICECCE). IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  15. Published

    Selective laser melted AlSi10Mg alloy under melting mode transition: Microstructure evolution, nanomechanical behaviors and tensile properties

    Wu, H., Ren, Y., Ren, J., Liang, L., Li, R., Fang, Q., Cai, A., Shan, Q., Tian, Y. & Baker, I., 25/08/2021, In: Journal of Alloys and Compounds. 873, 10 p., 159823.

    Research output: Contribution to journalJournal articlepeer-review

  16. E-pub ahead of print

    Advanced static and dynamic analysis method for helical springs of non-linear geometries

    Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.

    Research output: Contribution to journalJournal articlepeer-review

  17. E-pub ahead of print

    The femtosecond laser induced Zr64.13Cu15.75Ni10.12Al10 amorphous periodic surface structure

    Wang, J., Zhang, P., Shen, L., Yu, Z., Shi, H. & Tian, Y., 30/09/2021, In: Journal of Manufacturing Processes. 69, p. 613-620 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  18. Forthcoming

    Amine-Rich Coatings to Potentially Promote Cell Adhesion, Proliferation and Differentiation, and Reduce Microbial Colonization: Strategies for Generation and Characterization

    Martocq, L. & Douglas, T., 17/08/2021, (Accepted/In press) In: Coatings.

    Research output: Contribution to journalJournal articlepeer-review

  19. E-pub ahead of print

    Comparative life cycle assessment of NAD(P)H regeneration technologies

    Burnett, J., Sun, Z., Li, J., Wang, X. & Wang, X., 17/08/2021, In: Green Chemistry. 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  20. Published

    Pushing the Capture Limit of Thermionic Gun Linacs

    Saitiniyazi, S., Castilla Loeza, A., McKenzie, J., Apsimon, R., Militsyn, B., Angal-Kalinin, D. & Burt, G., 16/08/2021, In: Physical Review Accelerators and Beams. 24, 8, 12 p., 080401.

    Research output: Contribution to journalJournal articlepeer-review

  21. Published

    Fundamental properties of octalithium plumbate ceramic breeder material

    Davies, A. W. & Murphy, S. T., 15/08/2021, In: Journal of Nuclear Materials. 552, 8 p., 152982.

    Research output: Contribution to journalJournal articlepeer-review

  22. Published

    Kinetic study of the stabilization of an agro-industrial digestate by adding wood bottom ash

    Moure Abelenda, A., Semple, K., Lag Brotons, A., Herbert, B., Aggidis, G. & Aiouache, F., 15/08/2021, In: Chemical Engineering Journal Advances. 7, 7 p., 100127.

    Research output: Contribution to journalJournal articlepeer-review

  23. Published

    Martensite formation in titanium alloys: Crystallographic and compositional effects

    Bignon, M., Bertrand, E., Rivera-Díaz-del-Castillo, P. E. J. & Tancret, F., 15/08/2021, In: Journal of Alloys and Compounds. 872, 16 p., 159636.

    Research output: Contribution to journalJournal articlepeer-review

  24. Published

    Study regarding the influence of material type on economic objectives in MEx fabrication

    Ulmeanu, M-E., Doicin, C-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.

    Research output: Contribution to journalConference articlepeer-review

  25. Forthcoming

    Dynamics-Based Modified Fast Simultaneous Localisation and Mapping for Unmanned Aerial Vehicles with Joint Inertial Sensor Bias and Drift Estimation

    Sadeghzadeh Nokhodberiz, N., Can, A., Stolkin, R. & Montazeri, A., 2/08/2021, (Accepted/In press) In: IEEE Access.

    Research output: Contribution to journalJournal articlepeer-review

  26. Published

    A review on the effect of laser pulse shaping on the microstructure and hot cracking behavior in the welding of alloys

    Zhang, P., Jia, Z., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Chen, J., Wang, F. & Tian, Y., 1/08/2021, In: Optics and Laser Technology. 140, 20 p., 107094.

    Research output: Contribution to journalJournal articlepeer-review

  27. E-pub ahead of print

    Laser pyrolysis in papers and patents

    Spreafico, C., Russo, D. & Degl’Innocenti, R., 1/08/2021, In: Journal of Intelligent Manufacturing. 33 p.

    Research output: Contribution to journalJournal articlepeer-review

  28. Published

    Micromechanical analysis of UD CFRP composite lamina under multiaxial loading with different loading paths

    Chen, J., Wan, L., Ismail, Y., Hou, P., Ye, J. & Yang, D., 1/08/2021, In: Composite Structures. 269, 13 p., 114024.

    Research output: Contribution to journalJournal articlepeer-review

  29. Published

    Reliability-based design assessment of offshore inflatable barrier structures made of fibre-reinforced composites

    Aboshio, A., Uche, A. O., Akagwu, P. & Ye, J., 1/08/2021, In: Ocean Engineering. 233, 10 p., 109016.

    Research output: Contribution to journalJournal articlepeer-review

  30. Unpublished

    Highly Efficient Generation of Energy from Waste and Biomass Using Microwave-Induced Plasma Gasification

    Vecten, S., 08/2021, (Unpublished) Lancaster University. 220 p.

    Research output: ThesisDoctoral Thesis

  31. Published

    Flux-Weakening Control of Dual Three-Phase PMSM Based on Vector Space Decomposition Control

    Hu, Y., Li, Y., Ma, X., Li, X. & Huang, S., 31/07/2021, In: IEEE Transactions on Power Electronics . 36, 7, p. 8428-8438 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  32. E-pub ahead of print

    Machine learning-enabled prediction of wind turbine energy yield losses due to general blade leading edge erosion

    Cappugi, L., Castorrini, A., Bonfiglioli, A., Minisci, E. & Campobasso, S., 1/10/2021, In: Energy Conversion and Management. 245, 17 p., 114567.

    Research output: Contribution to journalJournal articlepeer-review

  33. Published

    Modification of heat-induced whey protein isolate hydrogel with highly bioactive glass particles results in promising biomaterial for bone tissue engineering

    Dziadek, M., Charuza, K., Kudlackova, R., Aveyard, J., D'Sa, R., Serafim, A., Stancu, I-C., Iovu, H., Kerns, J., Allinson, S., Dziadek, K., Szatkowski, P., Cholewa-Kowalska, K., Bacakova, L., Pamula, E. & Douglas, T., 31/07/2021, In: Materials and Design. 205, 14 p., 109749.

    Research output: Contribution to journalJournal articlepeer-review

  34. Published

    Numerical Analysis of Resonant Multipolar Instabilities in High Power Klystrons

    Cai, J., Syratchev, I. & Burt, G., 31/07/2021, In: IEEE Transactions on Electron Devices. 68, 7, p. 3617-3621 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  35. Published

    The effects of 1-ethyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide [emim] [NTf2] IL: acetone compositions on the amount, homogeneity and chemical stability of immobilized IL in hollow fiber-supported ionic liquid membranes (SILMs)

    Ramli, N. A., Hashim, N. A., Aroua, M. K., Shamiri, A. & Abdul Patah, M. F., 31/07/2021, In: Chemical Engineering Communications. 208, 7, p. 925-936 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  36. Published

    Thanaka (H. crenulata, n. crenulata, l. acidissima l.): A systematic review of its chemical, biological properties and cosmeceutical applications

    Lim, M. W., Aroua, M. K. & Gew, L. T., 30/07/2021, In: Cosmetics. 8, 3, 26 p., 68.

    Research output: Contribution to journalJournal articlepeer-review

  37. Published

    Big Data Analytics for Electricity Theft Detection in Smart Grids

    Khan, I. U., Javaid, N., Taylor, C. J., Gamage, K. & Ma, X., 29/07/2021, 2021 IEEE Madrid PowerTech - 14th IEEE Power and Energy Society PowerTech Conference. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  38. E-pub ahead of print

    Intelligent fault diagnosis of machinery using digital twin-assisted deep transfer learning

    Xia, M., Shao, H., Williams, D., Lu, S., Shu, L. & de Silva, C. W., 30/11/2021, In: Reliability Engineering and System Safety. 215, 9 p., 107938.

    Research output: Contribution to journalJournal articlepeer-review

  39. E-pub ahead of print

    Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies: a Finite Element Analysis

    Levent, A., Yapti, M., Celik, H. K., Kose, O., Kılıçaslan, Ö. F. & Rennie, A., 23/07/2021, In: The Journal of Foot and Ankle Surgery. YJFAS 53575.

    Research output: Contribution to journalJournal articlepeer-review

  40. Published

    Heparinized bioactive hybrid scaffolds for promoting and improving bone angiogenesis

    Najera Romero, G. V., 22/07/2021, Lancaster University. 219 p.

    Research output: ThesisDoctoral Thesis

  41. E-pub ahead of print

    Nonlinear analytical study of structural laminated glass under hard body impact in the pre-crack stage

    Huang, X-H., Wang, X-E., Yang, J., Pan, Z., Wang, F. & Azim, I., 31/10/2021, In: Thin-Walled Structures. 167, 17 p., 108137.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    Machine Learning for Additive Manufacturing

    Grierson, D., Rennie, A. & Quayle, S., 19/07/2021, In: Encyclopedia. 1, 3, p. 576-588 13 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  43. Published

    A parametric study of adhesive bonded joints with composite material using black-box and grey-box machine learning methods: Deep neuron networks and genetic programming

    Gu, Z., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 15/07/2021, In: Composites Part B: Engineering. 217, 11 p., 108894.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro-textures

    Wang, W., Wang, S., Zhang, X., Xu, Y., Tian, Y. & Huang, H., 15/07/2021, In: Materials Letters. 295, 4 p., 129872.

    Research output: Contribution to journalJournal articlepeer-review

  45. Published

    Process and Energy Intensification of Glycerol Carbonate Production from Glycerol and Dimethyl Carbonate in the Presence of Eggshell-Derived CaO Heterogeneous Catalyst

    Praikaew, W., Kiatkittipong, W., Aiouache, F., Najdanovic-Visak, V., Ngaosuwan, K., Wongsawaeng, D., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 14/07/2021, In: Energies. 14, 14, 15 p., 4249.

    Research output: Contribution to journalJournal articlepeer-review

  46. E-pub ahead of print

    Application of Spectral Kurtosis on vibration signals for the detection of cavitation in centrifugal pumps

    Mousmoulis, G., Yiakopoulos, C., Aggidis, G., Antoniadis, I. & Anagnostopoulos, I., 30/11/2021, In: Applied Acoustics. 182, 17 p., 108289 .

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    Power and spectral evolution of a Free Electron Laser oscillator with electron beam energy ramping

    Marks, H. S., Borodin, D. & Lurie, Y., 11/07/2021, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1004, 12 p., 165376.

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    Evolving Defect Chemistry of (Pu,Am)O2± x

    Neilson, W. D., Steele, H. & Murphy, S. T., 7/07/2021, In: The Journal of Physical Chemistry C. 125, 28, p. 15560-15568 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    Simulating ionising radiation in gazebo for robotic nuclear inspection challenges

    Wright, T., West, A., Licata, M., Hawes, N. & Lennox, B., 7/07/2021, In: Robotics. 10, 3

    Research output: Contribution to journalJournal articlepeer-review

  50. Published

    Use of Gaussian process regression for radiation mapping of a nuclear reactor with a mobile robot

    West, A., Tsitsimpelis, I., Licata, M., Jazbec, A., Snoj, L., Joyce, M. J. & Lennox, B., 7/07/2021, In: Scientific Reports. 11, 1, 11 p., 13975.

    Research output: Contribution to journalJournal articlepeer-review

  51. E-pub ahead of print

    Microstructure and properties of FeCoCrNiMoSix high-entropy alloys fabricated by spark plasma sintering

    Yang, Y., Ren, Y., Tian, Y., Li, K., Zhang, W., Shan, Q., Huang, Q. & Wu, H., 5/12/2021, In: Journal of Alloys and Compounds. 884, 9 p., 161070.

    Research output: Contribution to journalJournal articlepeer-review

  52. Published

    Elucidating the chemical and structural composition of breast cancer using raman micro-spectroscopy

    Lazaro-Pacheco, D., Shaaban, A. M., Titiloye, N. A., Rehman, S. & Rehman, I. U., 2/07/2021, In: EXCLI Journal. 20, p. 1118-1132 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  53. Published

    A micromechanics and machine learning coupled approach for failure prediction of unidirectional CFRP composites under triaxial loading: A preliminary study

    Chen, J., Wan, L., Ismail, Y., Ye, J. & Yang, D., 1/07/2021, In: Composite Structures. 267, 14 p., 113876.

    Research output: Contribution to journalJournal articlepeer-review

  54. Published

    Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process

    Wang, W., Du, M., Zhang, X., Luan, C. & Tian, Y., 1/07/2021, In: Materials. 14, 13, 15 p., 3700.

    Research output: Contribution to journalJournal articlepeer-review

  55. E-pub ahead of print

    2-D Mxene flakes as potential replacement for both TCO and Pt layers for Dye-Sensitized Solar cell

    Ahmad, M. S., Pandey, A. K., Abd Rahim, N., Aslfattahi, N., Mishra, Y. K., Rashid, B. & Saidur, R., 30/06/2021, In: Ceramics International.

    Research output: Contribution to journalJournal articlepeer-review

  56. Published

    Analysis of efficiency enhancement of flat plate solar collector using crystal nano-cellulose (CNC) nanofluids

    Farhana, K., Kadirgama, K., Mohammed, H. A., Ramasamy, D., Samykano, M. & Saidur, R., 30/06/2021, In: Sustainable Energy Technologies and Assessments. 45, 16 p., 101049.

    Research output: Contribution to journalJournal articlepeer-review

  57. Published

    Effects of wood ash-based alkaline treatment on nitrogen, carbon, and phosphorus availability in food waste and agro-industrial waste digestates

    Moure Abelenda, A., Semple, K., Lag Brotons, A., Herbert, B., Aggidis, G. & Aiouache, F., 30/06/2021, In: waste and biomass valorization journal. 12, 6, p. 3355-3370 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    Fission gas released from molten salt reactor fuel: the case of noble gas short life radioisotopes for radiopharmaceutical application

    Degueldre, C., Dawson, R., Cooley, I. & Besley, E., 30/06/2021, In: Medicine in Novel Technology and Devices. 10, 8 p., 100057.

    Research output: Contribution to journalJournal articlepeer-review

  59. Published

    State of the art of UV water treatment technologies and hydraulic design optimisation using computational modelling

    Shah, J., Zidonis, A. & Aggidis, G., 30/06/2021, In: Journal of Water Process Engineering. 41, 7 p., 102099.

    Research output: Contribution to journalJournal articlepeer-review

  60. E-pub ahead of print

    Experimentally validated three-dimensional computational aerodynamics of wind turbine blade sections featuring leading edge erosion cavities

    Campobasso, S., Castorrini, A., Cappugi, L. & Bonfiglioli, A., 27/06/2021, In: Wind Energy. 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  61. Forthcoming

    The evolving defect chemistry of (Pu,Am)O2x

    Murphy, S., Steele, H. & Neilson, W., 25/06/2021, (Accepted/In press) In: The Journal of Physical Chemistry C.

    Research output: Contribution to journalJournal articlepeer-review

  62. Published

    Filling Pattern Dependence of Regenerative Beam Breakup Instability in Energy Recovery Linacs

    Saitiniyazi, S., Apsimon, R. & Williams, P., 23/06/2021, In: Physical Review Accelerators and Beams. 24, 6, p. 1-10 10 p., 061003.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Tunable polarization-sensitive, long-wave infrared MDM subwavelength grating structure with wide-angle, narrow-band, and high absorption

    Zhang, L., Zheng, Y., Zhang, J., Yin, Y., Li, Q., Lei, J. & Zhu, Y., 23/06/2021, In: Optics Express. 29, 14, p. 21473-21491 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  64. Published

    A Review on Additive Manufacturing of Pure Copper

    Jiang, Q., Zhang, P., Yu, Z., Shi, H., Wu, D., Yan, H., Ye, X., Lu, Q. & Tian, Y., 21/06/2021, In: Coatings. 11, 6, 30 p., 740.

    Research output: Contribution to journalJournal articlepeer-review

  65. E-pub ahead of print

    The eggshell membrane: A potential biomaterial for corneal wound healing

    Mensah, R. A., Jo, S. B., Kim, H., Park, S-M., Patel, K. D., Cho, K. J., Cook, M. T., Kirton, S. B., Hutter, V., Sidney, L. E., Alves-Lima, D., Lin, H., Lee, J-H., Kim, H. & Chau, D. Y. S., 18/06/2021, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  66. E-pub ahead of print

    Anisotropic thermal conductivity in Li2TiO3 ceramic breeder materials

    Sanjeev, M., Gilbert, M. & Murphy, S., 16/06/2021, In: Fusion Engineering and Design. 8 p., 112710.

    Research output: Contribution to journalJournal articlepeer-review

  67. Published

    Effect of cartilage thickness mismatch in osteochondral grafting from knee to talus on articular contact pressures: A finite element analysis

    Kılıçaslan, Ö. F., Levent, A., Celik, H. K., Tokgöz, M. A., Köse, Ö. & Rennie, A., 11/06/2021, In: Joint Diseases and Related Surgery. 32, 2, p. 355-362 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  68. Published

    First demonstration of the use of crab cavities on hadron beams

    Calaga, R., Alekou, A., Antoniou, F., Appleby, R. B., Arnaudon, L., Artoos, K., Arduini, G., Baglin, V., Barriere, S., Bartosik, H., Baudrenghien, P., Ben-Zvi, I., Bohl, T., Boucherie, A., Brüning, O. S., Brodzinski, K., Butterworth, A., Burt, G., Capatina, O., Calvo, S. & 62 others, Capelli, T., Carlà, M., Carra, F., Carver, L. R., Castilla-Loeza, A., Daly, E., Dassa, L., Delayen, J., De Silva, S. U., Dexter, A., Garlasche, M., Gerigk, F., Giordanino, L., Glenat, D., Guinchard, M., Harrison, A., Jensen, E., Julie, C., Jones, T., Killing, F., Krawczyk, A., Levens, T., Leuxe, R., Lindstrom, B., Li, Z., MacEwen, A., MacPherson, A., Menendez, P., Mikkola, T., Minginette, P., Mitchell, J., Montesinos, E., Papotti, G., Park, H., Pasquino, C., Pattalwar, S., Pleite, E. C., Powers, T., Prochal, B., Ratti, A., Rossi, L., Rude, V., Therasse, M., Tomás, R., Stapley, N., Santillana, I., Shipman, N., Simonin, J., Sosin, M., Swieszek, J., Templeton, N., Vandoni, G., Verdú-Andrés, S., Wartak, M., Welsch, C., Wollman, D., Wu, Q., Xiao, B., Yamakawa, E., Zanoni, C., Zimmermann, F. & Zwozniak, A., 11/06/2021, In: Physical Review Accelerators and Beams. 24, 6, 6 p., 062001.

    Research output: Contribution to journalJournal articlepeer-review

  69. Published

    Numerical modelling of a large-scale UV-LED reactor performance – a case study

    Zidonis, A., Autin, O., Shah, J. & Aggidis, G., 8/06/2021.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  70. E-pub ahead of print

    Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

    Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 8/06/2021, In: Journal of Failure Analysis and Prevention. 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  71. Forthcoming

    Development of a D-band Traveling Wave Tube for high data rate wireless links

    Basu, R., Mahadev Rao, J., Quang, T. L., Letizia, R. & Paoloni, C., 7/06/2021, (Accepted/In press) In: IEEE Transactions on Electron Devices.

    Research output: Contribution to journalJournal articlepeer-review

  72. Published

    Evidence of solidification crack propagation in pulsed laser welding of aluminum alloy

    Jia, Z., Zhang, P., Yu, Z., Wu, D., Tian, Y. & Yan, H., 7/06/2021, In: Optics Express. 29, 12, p. 18495-18501 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  73. Published

    Experiences from COVID-19 and Emergency Remote Teaching for Entrepreneurship Education in Engineering Programmes

    Lambert, C. & Rennie, A., 7/06/2021, In: Educational Sciences. 11, 16 p., 282.

    Research output: Contribution to journalJournal articlepeer-review

  74. Published

    Pillared Mo2TiC2MXene for high-power and long-life lithium and sodium-ion batteries

    Maughan, P. A., Bouscarrat, L., Seymour, V. R., Shao, S., Haigh, S. J., Dawson, R., Tapia-Ruiz, N. & Bimbo, N., 7/06/2021, In: Nanoscale Advances. 3, 11, p. 3145-3158 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  75. Forthcoming

    Application of ultrasound-assisted extraction method to recover betalains and polyphenols from red beetroot waste

    Fernando, G. S., Wood, K., Papaioannou, E., Marshall, L. J., Sergeeva, N. N. & Bosch, C., 4/06/2021, (Accepted/In press) In: ACS Sustainable Chemistry & Engineering.

    Research output: Contribution to journalJournal articlepeer-review

  76. Published

    Weld zone porosity elimination process of galvanized steel zero-gap lap joints in remote laser spiral welding

    Xiong, W., Zhang, P., Yu, Z., Yan, H., Wu, D., Lu, Q. & Tian, Y., 2/06/2021, In: MATERIALS RESEARCH EXPRESS. 8, 6, 16 p., 066502.

    Research output: Contribution to journalJournal articlepeer-review

  77. Published

    Powder Characterization – Methods, Standards and State of the Art

    Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  78. Published

    Single virus inductively coupled plasma mass spectroscopy analysis: A comprehensive study

    Degueldre, C., 1/06/2021, In: Talanta. 228, 8 p., 122211.

    Research output: Contribution to journalJournal articlepeer-review

  79. Published

    Determination of the corrosion resistance of the welded steels used in underwater marine systems (including the submerged parts of Wave Energy Converters)

    Oikonomou, A. & Aggidis, G., 31/05/2021, In: Materials Today: Proceedings. 44, 7, p. 5048-5073 26 p.

    Research output: Contribution to journalJournal articlepeer-review

  80. Published

    Bio-Inspired Soft Robot for Locomotion and Navigation in Restricted Spaces

    Hu, Z. J. & Cheneler, D., 29/05/2021, In: Journal of Robotics and Automation. 5, 1, p. 236-250 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  81. E-pub ahead of print

    Using hierarchical mesoporous Mg-Al LDH as a potential model to precisely load BSA for biological application

    Li, X., Liang, L., Tan, Y., Huang, Q., Yang, S., Tian, Y., Zhou, J. & Wu, H., 24/05/2021, In: Journal of Micromechanics and Molecular Physics.

    Research output: Contribution to journalJournal articlepeer-review

  82. E-pub ahead of print

    A global-scale screening of non-native aquatic organisms to identify potentially invasive species under current and future climate conditions

    Vilizzi, L., Copp, G. H., Hill, J. E., Adamovich, B., Aislabie, L., Akin, D., Al-Faisal, A. J., Almeida, D., Azmai, M. N. A., Bakiu, R., Bellati, A., Bernier, R., Bies, J. M., Bilge, G., Branco, P., Bui, T. D., Canning-Clode, J., Cardoso Ramos, H. A., Castellanos-Galindo, G. A., Castro, N. & 176 others, Chaichana, R., Chainho, P., Chan, J., Cunico, A. M., Curd, A., Dangchana, P., Dashinov, D., Davison, P. I., de Camargo, M. P., Dodd, J. A., Durland Donahou, A. L., Edsman, L., Ekmekçi, F. G., Elphinstone-Davis, J., Erős, T., Evangelista, C., Fenwick, G., Ferincz, Á., Ferreira, T., Feunteun, E., Filiz, H., Forneck, S. C., Gajduchenko, H. S., Gama Monteiro, J., Gestoso, I., Giannetto, D., Gilles A.S., J., Gizzi, F., Glamuzina, B., Glamuzina, L., Goldsmit, J., Gollasch, S., Goulletquer, P., Grabowska, J., Harmer, R., Haubrock, P. J., He, D., Hean, J. W., Herczeg, G., Howland, K. L., İlhan, A., Interesova, E., Jakubčinová, K., Jelmert, A., Johnsen, S. I., Kakareko, T., Kanongdate, K., Killi, N., Kim, J-E., Kırankaya, Ş. G., Kňazovická, D., Kopecký, O., Kostov, V., Koutsikos, N., Kozic, S., Kuljanishvili, T., Kumar, B., Kumar, L., Kurita, Y., Kurtul, I., Lazzaro, L., Lee, L., Lehtiniemi, M., Leonardi, G., Leuven, R. S. E. W., Li, S., Lipinskaya, T., Liu, F., Lloyd, L., Lorenzoni, M., Luna, S. A., Lyons, T. J., Magellan, K., Malmstrøm, M., Marchini, A., Marr, S. M., Masson, G., Masson, L., McKenzie, C. H., Memedemin, D., Mendoza, R., Minchin, D., Miossec, L., Moghaddas, S. D., Moshobane, M. C., Mumladze, L., Naddafi, R., Najafi-Majd, E., Năstase, A., Năvodaru, I., Neal, J. W., Nienhuis, S., Nimtim, M., Nolan, E. T., Occhipinti-Ambrogi, A., Ojaveer, H., Olenin, S., Olsson, K., Onikura, N., O'Shaughnessy, K., Paganelli, D., Parretti, P., Patoka, J., Pavia R.T.B., J., Pellitteri-Rosa, D., Pelletier-Rousseau, M., Peralta, E. M., Perdikaris, C., Pietraszewski, D., Piria, M., Pitois, S., Pompei, L., Poulet, N., Preda, C., Puntila-Dodd, R., Qashqaei, A. T., Radočaj, T., Rahmani, H., Raj, S., Reeves, D., Ristovska, M., Rizevsky, V., Robertson, D. R., Robertson, P., Ruykys, L., Saba, A. O., Santos, J. M., Sarı, H. M., Segurado, P., Semenchenko, V., Senanan, W., Simard, N., Simonović, P., Skóra, M. E., Slovák Švolíková, K., Smeti, E., Šmídová, T., Špelić, I., Srėbalienė, G., Stasolla, G., Stebbing, P., Števove, B., Suresh, V. R., Szajbert, B., Ta, K. A. T., Tarkan, A. S., Tempesti, J., Therriault, T. W., Tidbury, H. J., Top-Karakuş, N., Tricarico, E., Troca, D. F. A., Tsiamis, K., Tuckett, Q. M., Tutman, P., Uyan, U., Uzunova, E., Vardakas, L., Velle, G., Verreycken, H., Vintsek, L., Wei, H., Weiperth, A., Weyl, O. L. F., Winter, E. R., Włodarczyk, R., Wood, L. E., Yang, R., Yapıcı, S., Yeo, S. S. B., Yoğurtçuoğlu, B., Yunnie, A. L. E., Zhu, Y., Zięba, G., Žitňanová, K. & Clarke, S., 20/09/2021, In: Science of the Total Environment. 788, 16 p., 147868.

    Research output: Contribution to journalJournal articlepeer-review

  83. Published

    Alloy design by tailoring phase stability in commercial Ti alloys

    Zhao, G-H., Liang, X. Z., Xu, X., Gamża, M. B., Mao, H., Louzguine-Luzgin, D. V. & Rivera-Díaz-del-Castillo, P. E. J., 20/05/2021, In: Materials Science and Engineering: A. 815, 10 p., 141229.

    Research output: Contribution to journalJournal articlepeer-review

  84. E-pub ahead of print

    Radiation testing of low cost, commercial off the shelf microcontroller board

    Fried, T., Di Buono, A., Cheneler, D., Cockbain, N., Dodds, J., Green, P. R., Lennox, B., Taylor, C. J. & Monk, S., 31/10/2021, In: Nuclear Engineering and Technology. 53, 10, p. 3335-3343 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  85. E-pub ahead of print

    Selective Laser Melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry

    El Kashouty, M., Rennie, A., Ghazy, M. & El Aziz, A. A., 18/05/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 12 p., 989382.

    Research output: Contribution to journalJournal articlepeer-review

  86. Published

    Microstructures and mechanical properties of Nb nanoparticles modified Ni60 hard-facing alloy fabricated by laser metal deposition

    Liu, L., Wang, W., Zhang, X., Li, X., Tian, Y. & Zhao, X., 13/05/2021, In: Materials Science and Engineering: A. 814, 13 p., 141238.

    Research output: Contribution to journalJournal articlepeer-review

  87. E-pub ahead of print

    The response of macrophages and their osteogenic potential modulated by micro/nano-structured Ti surfaces

    Liu, W., Liang, L., Liu, B., Zhao, D., Tian, Y., Huang, Q. & Wu, H., 30/09/2021, In: Colloids and Surfaces B: Biointerfaces. 205, 11 p., 111848.

    Research output: Contribution to journalJournal articlepeer-review

  88. E-pub ahead of print

    Stray Flux-Based Rotation Angle Measurement for Bearing Fault Diagnosis in Variable-Speed BLDC Motors

    Wang, X., Lu, S., Cao, W., Xia, M., Chen, K., Ding, J. & Zhang, S., 12/05/2021, In: IEEE Transactions on Energy Conversion.

    Research output: Contribution to journalJournal articlepeer-review

  89. E-pub ahead of print

    Adversarial domain-invariant generalization: a generic domain-regressive framework for bearing fault diagnosis under unseen conditions

    Chen, L., Li, Q., Shen, C., Zhu, J., Wang, D. & Xia, M., 11/05/2021, In: IEEE Transactions on Industrial Informatics. 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  90. Published

    Deformation mechanisms in hexagonal close-packed high-entropy alloys

    Wang, Z., Bao, M. L., Wang, X. J., Liaw, P. K., Guo, R. P. & Qiao, J. W., 7/05/2021, In: Journal of Applied Physics. 129, 17, 10 p., 175104.

    Research output: Contribution to journalJournal articlepeer-review

  91. Published

    Effect of phase transformation on mechanical properties of Al16.80Co20.74Cr20.49Fe21.28Ni20.70 high entropy alloy coatings processed by laser cladding

    Wei, X., Zhang, P., Yu, Z., Yan, H., Wu, D., Shi, H., Chen, J., Lu, Q., Tian, Y., Ma, S. & Lei, W., 5/05/2021, In: Journal of Alloys and Compounds. 862, 16 p., 158563.

    Research output: Contribution to journalJournal articlepeer-review

  92. E-pub ahead of print

    Enzyme catalysis coupled with artificial membranes towards process intensification in biorefinery- a review

    Mazzei, R., Yihdego Gebreyohannes, A., Papaioannou, E., Nunes, S. P., Vankelecom, I. F. J. & Giorno, L., 30/09/2021, In: Bioresource Technology. 335, 13 p., 125248.

    Research output: Contribution to journalJournal articlepeer-review

  93. Published

    Synthesis and characterization of alkali-activated loess and its application as protective coating

    Dassekpo, J-BM., Feng, W., Li, Y., Miao, L., Dong, Z. & Ye, J., 3/05/2021, In: Construction and Building Materials. 282, 12 p., 122631.

    Research output: Contribution to journalJournal articlepeer-review

  94. Published

    Experimental investigation and performance comparison of a 1 single OWC, array and M-OWC

    Doyle, S. & Aggidis, G. A., 1/05/2021, In: Renewable Energy. 168, p. 365-374 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  95. Published

    The influence of power-take-off control on the dynamic response and power output of combined semi-submersible floating wind turbine and point-absorber wave energy converters

    Si, Y., Chen, Z., Zeng, W., Sun, J., Zhang, D., Ma, X. & Qian, P., 1/05/2021, In: Ocean Engineering. 227, 23 p., 108835.

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    Effect of deposition rate on microstructure and mechanical properties of wire arc additive manufacturing of Ti-6Al-4V components

    Zhang, P-L., Jia, Z-Y., Yan, H., Yu, Z-S., Wu, D., Shi, H-C., Wang, F-X., Tian, Y-T., Ma, S-Y. & Lei, W-S., 30/04/2021, In: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology). 28, 4, p. 1100-1110 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  97. Published

    Investigations on the impact of the introduction of the Aloe vera into the hydrogel matrix on cytotoxic and hydrophilic properties of these systems considered as potential wound dressings

    Kudlacik-Kramarczyk, S., Drabczyk, A., Glab, M., Alves De Lima, D., Lin, H., Douglas, T., Kuciel, S., Zagorska, A. & Tyliszczak, B., 30/04/2021, In: Materials Science and Engineering: C . 123, 12 p., 111977.

    Research output: Contribution to journalJournal articlepeer-review

  98. Published

    Optimisation of energy harvesting for stiffened composite shells with application to the aircraft wing at structural flight frequency

    Daraji, A. H., Hale, J. M. & Ye, J., 30/04/2021, In: Thin-Walled Structures. 161, 10 p., 107392.

    Research output: Contribution to journalJournal articlepeer-review

  99. Published

    Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties

    Wang, W., Wang, S., Zhang, X., Chen, F., Xu, Y. & Tian, Y., 30/04/2021, In: Journal of Manufacturing Processes. 64, p. 530-543 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  100. Forthcoming

    Surveying the Challenges to Improve Linear Accelerator-based Radiation Therapy in Africa: a Unique Collaborative Platform of All 28 African Countries Offering Such Treatment

    Burt, G., 29/04/2021, (Accepted/In press) In: Clinical Oncology.

    Research output: Contribution to journalJournal articlepeer-review

  101. E-pub ahead of print

    Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming

    Gu, Z., Hou, X. & Ye, J., 28/04/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 14 p.

    Research output: Contribution to journalJournal articlepeer-review

Previous 1 2 3 4 5 6 7 8 ...50 Next

Back to top