Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    Pore-scale numerical investigation of pressure drop behaviour across open-cell metal foams

    Carvalho, T. P. D., Morvan, H., Hargreaves, D., Oun, H. & Kennedy, A., 03/2017, In: Transport in Porous Media. 117, 2, p. 311-336 26 p.

    Research output: Contribution to journalJournal articlepeer-review

  2. Published

    Comparison between three GaAs monolithic transimpedance amplifiers for optical communication systems

    Casao, J. A., Dorta, P., Caceres, J. L., Salazar-Palma, M., Perez, J., Orengo, G., Paoloni, C. & Giannini, F., 1/12/1992, 1992 22nd European Microwave Conference. IEEE, p. 330-335 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  3. Published

    Influence of collisions on parametric instabilities induced by lower hybrid waves in tokamak plasmas

    Castaldo, C., Di Siena, A., Fedele, R., Napoli, F., Amicucci, L., Cesario, R. & Schettini, G., 25/11/2015, In: Nuclear Fusion. 56, 1, 13 p., 016003.

    Research output: Contribution to journalJournal articlepeer-review

  4. Published

    Modelling of an integrated supermarket refrigeration and heating system using natural refrigerants.

    Castle, T. & Anderson, D. C., 1996, Proceedings of the 6th international refrigeration conference. Indiana

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  5. Published

    Computational analysis of particle-laden-airflow erosion and experimental verification

    Castorrini, A., Venturini, P., Corsini, A., Rispoli, F., Takizawa, K. & Tezduyar, T. E., 24/03/2020, In: Computational Mechanics. 65, p. 1549–1565 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  6. Published

    Assessing wind turbine energy losses due to blade leading edge erosion cavities with parametric CAD and 3D CFD

    Castorrini, A., Cappugi, L., Bonfiglioli, A. & Campobasso, S., 28/09/2020, In: Journal of Physics: Conference Series. 1618, 11 p., 052015.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    Increasing spatial resolution of wind resource prediction using NWP and RANS simulation

    Castorrini, A., Gentile, S., Geraldi, E. & Bonfiglioli, A., 31/03/2021, In: Journal of Wind Engineering and Industrial Aerodynamics. 210, 18 p., 104499.

    Research output: Contribution to journalJournal articlepeer-review

  8. Published

    Machine learnt prediction method for rain erosion damage on wind turbine blades

    Castorrini, A., Venturini, P., Corsini, A. & Rispoli, F., 31/08/2021, In: Wind Energy. 24, 8, p. 917-934 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  9. Published

    Simulation of the deposit evolution on a fan blade for tunnel ventilation

    Castorrini, A., Venturini, P., Corsini, A. & Rispoli, F., 30/04/2020, In: Journal of Engineering for Gas Turbines and Power. 142, 4, 041010.

    Research output: Contribution to journalJournal articlepeer-review

  10. Published

    Changes in microbial utilization and fate of soil carbon following the addition of different fractions of anaerobic digestate to soils

    Cattin, M., Semple, K., Stutter, M., Romano, G., Lag Brotons, A., Parry, C. & Surridge, B., 30/11/2021, In: European Journal of Soil Science. 72, 6, p. 2398-2413 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Low Head Hydropower Developments.

    Cattley, R., Widden, M. B. & Aggidis, G. A., 2005, In: Proceedings of the world renewable energy congress.

    Research output: Contribution to journalJournal article

  12. Published

    Harmonic balance Navier-Stokes analysis of tidal stream turbine wave loads

    Cavazzini, A., Campobasso, M. S., Marconcini, M., Pacciani, R. & Arnone, A., 1/03/2019, Recent Advances in CFD for Wind and​ Tidal Offshore Turbines: Springer Tracts in Mechanical Engineering. Ferrer, E. & de Montflaur, A. (eds.). 2nd ed. ed. Cham: Springer International Publishing, p. 37-49 13 p. (Springer Tracts in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  13. Unpublished

    Estimating energy losses of utility-scale wind turbines due to blade surface damage

    Cavazzini, A., 2019, (Unpublished) Lancaster University. 106 p.

    Research output: ThesisMaster's Thesis

  14. Published

    Machine learning-aided assessment of wind turbine energy losses due to blade leading edge damage

    Cavazzini, A., Minisci, E. & Campobasso, M. S., 13/12/2019, ASME 2019 2nd International Offshore Wind Technical Conference. The American Society of Mechanical Engineers, 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  15. Published

    Deformation behaviour simulation of an apple under drop case by finite element method

    Celik, H. K., Rennie, A. & Akinci, I., 05/2011, In: Journal of Food Engineering. 104, 2, p. 293-298 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  16. Published

    Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine

    Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  17. Published

    Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips

    Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  18. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  19. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  20. Published

    Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components

    Celik, H. K., Tan, Y., Seviour, R. & Rennie, A., 09/2009, US _ TURKEY Workshop on Rapid Technologies (RapidTech 2009). p. 83-88 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  22. Published

    Stress analysis of a sample marine crane’s boom under static loading condition

    Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method

    Celik, K., Rennie, A. & Akinci, I., 07/2012, International Conference of Agricultural Engineering (CIGR-AgEng 2012): Proceedings of the . 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  24. Published

    Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools

    Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  25. Published
  26. Published

    Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips

    Celik, K., Lupeanu, M., Rennie, A., Neagu, C. & Akinci, I., 10/2013, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  27. Published

    Predicting limit draft force for a chisel tine using FEA based simulation

    Celik, K., Rennie, A. & Akinci, I., 09/2013, 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  28. Published

    Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  29. Published

    Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

    Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  30. Published

    Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

    Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  31. Published

    Design and structural optimisation of a tractor mounted telescopic boom crane

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924

    Research output: Contribution to journalJournal articlepeer-review

  32. Published

    Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering

    Celik, H. K., Caglayan, N. & Rennie, A. E. W., 10/2017, In: Journal of Food Process Engineering. 40, 5, 8 p., e12520.

    Research output: Contribution to journalJournal articlepeer-review

  33. Published

    Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication

    Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  34. Published

    Determination of the Failure Susceptibility of a Flat Die used in Biomass Pelletizing Machines by means of FEA based Design Exploration

    Celik, H. K., Yilmaz, H., Rennie, A. E. W., Cinar, R. & Firat, M. Z., 10/2018, In: Journal of Failure Analysis and Prevention. 18, 5, p. 1099-1110 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  35. Published

    Finite Element Analysis of a PTO Shaft Used in an Agricultural Tractor

    Celik, H. K., Cinar, R., Kunt, G., Rennie, A. E. W., Ucar, M. & Akinci, I., 15/05/2018, In: Ergonomics International Journal. 2, 3, 6 p., 000147.

    Research output: Contribution to journalJournal articlepeer-review

  36. Published

    Determination of Time Dependent Stress Distribution on Potato Tubers at Mechanical Collision

    Celik, H. K., Cinar, R., Rennie, A. E. W., Ulmeanu, M-E. & Akinci, I., 04/2018, CIGR 2018: XIX World Congress of CIGR: "Sustainable Life for Children". Akinci, I., Aykas, E. & Güngör, Ö. (eds.). Antalya, Turkey, p. 123 1 p. OP-081 [Section VI: Bioprocesses]

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNAbstract

  37. Published

    Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses

    Celik, H. K., Rennie, A. E. W. & Caglayan, N., 12/2017, In: Journal of Agricultural Machinery Science. 13, 2, p. 107-112 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  38. Published

    Finite Element Analysis of a PTO Shaft used in an Agricultural Tractor

    Celik, H. K., Cinar, R., Rennie, A. E. W., Ucar, M. & Akinci, I., 22/04/2018, p. 213-213. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  39. Published

    Mechanical collision simulation of potato tubers

    Celik, H. K., Cinar, R., Yilmaz, D., Ulmeanu, M-E., Rennie, A. E. W. & Akinci, I., 1/08/2019, In: Journal of Food Process Engineering. 42, 5, 7 p., e13078.

    Research output: Contribution to journalJournal articlepeer-review

  40. Published

    Strength-based Design Analysis of a Para-Plow Tillage Tool

    Celik, H. K., Caglayan, N., Topakci, M., Rennie, A. & Akinci, I., 29/02/2020, In: Computers and Electronics in Agriculture. 169, 15 p., 105168.

    Research output: Contribution to journalJournal articlepeer-review

  41. Published

    A Potential Research Area Under Shadow In Engineering: Agricultural Machinery Design and Manufacturing

    Celik, H. K., Rennie, A. & Akinci, I., 1/06/2020, In: ISPEC Journal of Agricultural Sciences. 4, 2, p. 66-86 21 p.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    A potential research area under shadow in engineering: Agricultural machinery design and manufacturing

    Celik, K., Rennie, A. & Akinci, I., 28/03/2019. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  43. Published

    Design and Additive Manufacturing of a Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19)

    Celik, H. K., Kose, O., Ulmeanu, M-E., Rennie, A., Abram, T. & Akinci, I., 7/08/2020, In: International Journal of Bioprinting. 6, 4, 21 p., 286.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    Effects of Bruising of ‘Pink Lady’ Apple Under Impact Loading in Drop Test on Firmness, Colour and Gas Exchange of Fruit During Long Term Storage

    Celik, H. K., Ustun, H., Erkan, M., Rennie, A. & Akinci, I., 30/09/2021, In: Postharvest Biology and Technology. 179, 13 p., 111561.

    Research output: Contribution to journalJournal articlepeer-review

  45. Published

    CFD Simulation of Air Flow Behaviour at Different Flow Rates in a Turkish Woodwind Instrument (Turkish Treble Recorder)

    Celik, H. K., Bedel, A., Gok, S. & Rennie, A., 28/03/2021, In: Open Journal of Acoustics. 11, 1, p. 1-16 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  46. Published

    Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

    Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    A literature review on the linear elastic material properties assigned in finite element analyses in dental research

    Celik, H. K., Koc, S., Kustarci, A. & Rennie, A., 31/03/2022, In: MATERIALS TODAY COMMUNICATIONS. 30, 10 p., 103087.

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    Neutron-induced soft errors in advanced flash memories

    Cellere, G., Gerardin, S., Bagatin, M., Paccagnella, A., Visconti, A., Bonanomi, M., Beltrami, S., Roche, P., Gasiot, G., Sørensen, R. H., Virtanen, A., Frost, C., Fuochi, P., Andreani, C., Gorini, G., Pietropaolo, A. & Platt, S., 1/12/2008, 2008 IEEE International Electron Devices Meeting, IEDM 2008. IEEE, 4 p. 4796693. (Technical Digest - International Electron Devices Meeting, IEDM).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  49. Published

    Criticality of the [C(4)mim] [BF4] plus water system

    Cerdeirina, CA., Troncoso, N. V., Ramos, CP., Romani, L., Najdanovic-Visak, V., Guedes, HJR., Esperanca, JMSS., Visak, ZP., da Ponte, MN. & Rebelo, LPN., 2005, Ionic liquids III: fundamentals, progress, challenges, and opportunities. Rogers, R. D. & Seddon, K. R. (eds.). Washington, D. C.: American Chemical Society, p. 175-186 12 p. (ACS Symposium Series; vol. 901).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  50. Unpublished

    Conceptual design and development of a navigation system for a mobile robot

    Chandler, A., Yavuz, H., Bradshaw, A. & Seward, D., 05/1999, (Unpublished) Lancaster University.

    Research output: ThesisDoctoral Thesis

  51. Unpublished

    Testing Petri Nets for Mobile Robots Using Groebner Bases

    Chandler, A., Blair, L., Heyworth, A. & Seward, D., 01/2000, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Other

  52. Unpublished

    From Design to Execution of a Mechatronic System

    Chandler, A., Seward, D. & Chaplin, R., 01/2000, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Other

  53. Published

    Control systems for WRASPA.

    Chaplin, R., Rahmati, R., Gunura, K., Ma, X. & Aggidis, G. A., 06/2009. 93 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  54. Published

    WRASPA: Wave Interactions and Control for Pitching-Surge Point-Absorber Wave Energy Converters.

    Chaplin, R. V. & Aggidis, G. A., 09/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  55. Published

    An Investigation into Power from Pitch-Surge Point-Absorber Wave Energy Converters.

    Chaplin, R. V. & Aggidis, G. A., 05/2007, International Conference on Clean Electrical Power, 2007. ICCEP '07.. IEEE, p. 520-525 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  56. Published

    Smart sensors for buried utility location and performance monitoring

    Chapman, D., Cheneler, D., Metje, N., Thomas, A. & Ward, M., 2009, London: UK Water Industry Research. 44 p.

    Research output: Book/Report/ProceedingsBook

  57. Published

    Successful surgical treatment of obstructive liver disease caused by a biliary calculus in a captive Chimpanzee (Pan Troglodytes)

    Chatterton, J., Unwin, S., Rehman, I. U. & Bridson-Walton, J. M., 2015, In: Journal of Zoo and Wildlife Medicine. 46, 4, p. 925-928 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    Engineering FEA Sintering Model Development for Metal Supported SOFC

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Mukerjee, S. & Selby, M., 23/07/2017, In: ECS Transactions. 78, 1, p. 2773-2783 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  59. Published

    Validation of Engineering FEA Predictive Sintering Models of Steel Supported SOFCs

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Selby, M. & Mukerjee, S., 3/07/2018, Proceedings of the 13th European SOFC & SOE Forum 2018 .

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  60. Unpublished

    Engineering FEA Sintering Model Development for Metal Supported SOFCs

    Chatzimichail, R., 2021, (Unpublished) Lancaster University. 273 p.

    Research output: ThesisDoctoral Thesis

  61. Published

    Determination of water content in dehydrated mammalian cells using terahertz pulsed imaging: a feasibility study

    Chau, D. Y. S., Dennis, A. R., Lin, H., Zeitler, J. A. & Tunnacliffe, A., 2016, In: Current Pharmaceutical Biotechnology. 17, 2, p. 200-207 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  62. Published

    Instant nano-hydroxyapatite: A continuous and rapid hydrothermal synthesis

    Chaudhry, A. A., Haque, S., Kellici, S., Boldrin, P., Rehman, I., Khalid, F. A. & Darr, J. A., 2006, In: Chemical Communications. 21, p. 2286-2288 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Phase stability and rapid consolidation of hydroxyapatite-zirconia nano-coprecipitates made using continuous hydrothermal flow synthesis

    Chaudhry, A. A., Yan, H., Viola, G., Reece, M. J., Knowles, J. C., Gong, K., Rehman, I. & Darr, J. A., 2012, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 27, 1, p. 79-90 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  64. Published

    High-strength nanograined and translucent hydroxyapatite monoliths via continuous hydrothermal synthesis and optimized spark plasma sintering

    Chaudhry, A. A., Yan, H., Gong, K., Inam, F., Viola, G., Reece, M. J., Goodall, J. B. M., Ur Rehman, I., McNeil-Watson, F. K., Corbett, J. C. W., Knowles, J. C. & Darr, J. A., 2011, In: Acta Biomaterialia. 7, 2, p. 791-799 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  65. Published

    Synthesis and characterisation of magnesium substituted calcium phosphate bioceramic nanoparticles made via continuous hydrothermal flow synthesis

    Chaudhry, A. A., Goodall, J., Vickers, M., Cockcroft, J. K., Rehman, I., Knowles, J. C. & Darr, J. A., 2008, In: Journal of Materials Chemistry. 18, 48, p. 5900-5908 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  66. Published

    Rapid hydrothermal flow synthesis and characterisation of carbonate and silicate-substituted calcium phosphates

    Chaudhry, A. A., Knowles, J. C., Rehman, I. & Darr, J. A., 2013, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 28, 3, p. 448-461 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  67. Published

    Quantifying Extracellular Matrix Changes in Osteoarthritic Human Cartilage and Subchondral Bone Using Raman Microspectroscopy

    Che Ahmad Tantowi, N. A., Cheneler, D., McLauchlan, G. & Kerns, J., 1/03/2021, In: Orthopaedic Proceedings. 103-B, SUPP_2, p. 101 1 p.

    Research output: Contribution to journalMeeting abstract

  68. Published

    Using a Camera Phone as a Mixed-Reality Laser Cannon.

    Chehimi, F., Coulton, P. & Edwards, R., 03/2008, In: International Journal of Computer Games Technology. 2008, p. 1-6 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  69. Published

    3D Motion Control of Connected Augmented Virtuality on Mobile Phones.

    Chehimi, F., Coulton, P. & Edwards, R., 10/07/2008, Proceedings of the 2008 International Symposium on Ubiquitous Virtual Reality. Gwangju: IEEE Computer Society, p. 67-70 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  70. Published

    Augmented Reality 3D Interactive Advertisements on Smartphones.

    Chehimi, F., Coulton, P. & Edwards, R., 07/2007, International Conference on the Management of Mobile Business, 2007. ICMB 2007.. Toronto, Ont.: IEEE Computer Society, p. 21-21 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  71. Published

    Mobilazer: A Mixed-Reality First-Person Shoot-Em-Up Using Camera Phones.

    Chehimi, F., Coulton, P. & Edwards, R., 09/2007. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  72. Published

    A Novel 3D Game API for Symbian OS Smartphones.

    Chehimi, F., Coulton, P. & Edwards, R., 11/2006. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  73. Published

    Delivering 3D advertising to mobile phones.

    Chehimi, F., Coulton, P. & Edwards, R., 01/2006. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  74. Published

    C++ Optimisations for Mobile Applications.

    Chehimi, F., Coulton, P. & Edwards, R., 07/2006, Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  75. Published

    Advances in 3D Graphics for Smartphones.

    Chehimi, F., Coulton, P. & Edwards, R., 04/2006, Information and Communication Technologies, 2006. ICTTA '06. 2nd. IEEE, p. 99-104 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  76. Published

    Evolution of 3D Games on Mobile Phones.

    Chehimi, F., Coulton, P. & Edwards, R., 07/2005, Mobile Business, 2005. ICMB 2005. International Conference on. IEEE, p. 173-179 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  77. Published

    Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications

    Chen, H-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  78. Published

    Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications

    Chen, H-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  79. Published

    Single mode fibre laser welding of dissimilar aerospace alloys

    Chen, H-C., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 505-510 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Published

    A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V

    Chen, H-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  81. Published

    Fibre laser welding of Zn-coated steel in Al alloy for next generation lightweight vehicles

    Chen, H-C., Pinkerton, A. J., Li, L. & Mistry, A. T., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P104

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  82. Published

    Simulation of Neptunium Extraction in an Advanced PUREX Process — Model Improvement

    Chen, H., Taylor, R. J., Jobson, M., Woodhead, D., Boxall, C., Masters, A. & Edwards, S., 2017, In: Solvent Extraction and Ion Exchange. 35, 1, p. 1-18 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  83. Published

    SU-8 micromachined WR-3 band waveguide bandpass filter with low insertion loss

    Chen, Q., Shang, X., Tian, Y., Xu, J. & Lancaster, M. J., 28/03/2013, In: Electronics Letters. 49, 7, p. 480-482 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  84. Published

    Laser cladding of Ni60+ 17-4 PH composite for a cracking-free and corrision resistive coating

    Chen, Z., Li, R., Gu, J., Zhang, Z., Tao, Y. & Tian, Y., 1/01/2020, In: International Journal of Modern Physics B. 34, 1n03, 2040042.

    Research output: Contribution to journalJournal articlepeer-review

  85. Published

    Composition-structure-property effects of antimony in soda-lime-silica glasses

    Chen, T-Y., Rautiyal, P., Vaishnav, S., Gupta, G., Schlegl, H., Dawson, R. J., Evans, A. W., Kamali, S., Johnson, J. A., Johnson, C. E. & Bingham, P. A., 15/09/2020, In: Journal of Non-Crystalline Solids. 544, 16 p., 120184.

    Research output: Contribution to journalJournal articlepeer-review

  86. Published

    Effect of beam defocusing on porosity formation in laser-MIG hybrid welded TA2 titanium alloy joints

    Chen, S., Luo, S., Yu, H., Geng, H., Xu, G., Li, R. & Tian, Y., 1/10/2020, In: Journal of Manufacturing Processes. 58, p. 1221-1231 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  87. Published

    Exploring Equipment Electrocardiogram Mechanism for Performance Degradation Monitoring in Smart Manufacturing

    Chen, B., Wan, J., Xia, M. & Zhang, Y., 1/10/2020, In: IEEE/ASME Transactions on Mechatronics. 25, 5, p. 2276-2286 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  88. Published

    A micromechanics and machine learning coupled approach for failure prediction of unidirectional CFRP composites under triaxial loading: A preliminary study

    Chen, J., Wan, L., Ismail, Y., Ye, J. & Yang, D., 1/07/2021, In: Composite Structures. 267, 14 p., 113876.

    Research output: Contribution to journalJournal articlepeer-review

  89. Published

    Micromechanical analysis of UD CFRP composite lamina under multiaxial loading with different loading paths

    Chen, J., Wan, L., Ismail, Y., Hou, P., Ye, J. & Yang, D., 1/08/2021, In: Composite Structures. 269, 13 p., 114024.

    Research output: Contribution to journalJournal articlepeer-review

  90. Published

    Adversarial domain-invariant generalization: a generic domain-regressive framework for bearing fault diagnosis under unseen conditions

    Chen, L., Li, Q., Shen, C., Zhu, J., Wang, D. & Xia, M., 31/03/2022, In: IEEE Transactions on Industrial Informatics. 18, 3, p. 1790-1800 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  91. Published

    Ceramic Stereolithography of Bioactive Glasses: Influence of Resin Composition on Curing Behavior and Green Body Properties

    Chen, Q., Schmidt, F., Görke, O., Asif, A., Weinhold, J., Aghaei, E., Ur Rehman, I., Gurlo, A. & Shah, A. T., 7/02/2022, In: Biomedicines. 10, 2, 15 p., e395.

    Research output: Contribution to journalJournal articlepeer-review

  92. Published

    Fabrication and analysis of cylindrical resin AFM microcantilevers

    Cheneler, D., Bowen, J., Leigh, S. J., Purssell, C. P., Billson, D. R., Hutchins, D. A. & Ward, M. C. L., 07/2011, In: Ultramicroscopy. 111, 8, p. 1214-1223 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  93. Published

    Spherical indentation analysis of stress relaxation for thin film viscoelastic materials

    Cheneler, D., Mehrban, N. & Bowen, J., 07/2013, In: Rheologica Acta. 52, 7, p. 695-706 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  94. Published

    Degradation of polymer films

    Cheneler, D. & Bowen, J., 2013, In: Soft Matter. 9, 2, p. 344-358 15 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  95. Published

    Bio-hybrid tactile sensor for the study of the role of mechanoreceptors in human tactile perception

    Cheneler, D., Ward, M. & Anthony, C., 09/2012, In: Microelectronic Engineering. 97, p. 297-300 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    Micro squeeze flow rheometer for high frequency analysis of nano-litre volumes of viscoelastic fluid

    Cheneler, D., Bowen, J., Ward, M. C. L. & Adams, M. J., 08/2011, In: Microelectronic Engineering. 88, 8, p. 1726-1729 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  97. Published

    Measurement of dynamic properties of small volumes of fluid using MEMS

    Cheneler, D., Ward, M. C. L., Adams, M. J. & Zhang, Z., 28/03/2008, In: Sensors and Actuators B: Chemical. 130, 2, p. 701-706 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  98. Published

    Printed circuit board as a MEMS platform for focused ion beam technology

    Cheneler, D., Teng, J., Adams, M., Anthony, C. J., Carter, E. L. & Ward, M., 01/2011, In: Microelectronic Engineering. 88, 1, p. 121-126 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  99. Published

    Characteristics and durability of fluoropolymer thin films

    Cheneler, D., Bowen, J., Evans, S. D., Górzny, M., Adams, M. J. & Ward, M. C. L., 04/2011, In: Polymer Degradation and Stability. 96, 4, p. 561-565 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  100. Published

    Principles of a micro squeeze flow rheometer for the analysis of extremely small volumes of liquid

    Cheneler, D., Bowen, J., Ward, M. C. L. & Adams, M. J., 04/2011, In: Journal of Micromechanics and Microengineering. 21, 4, 045030.

    Research output: Contribution to journalJournal articlepeer-review

Previous 1...7 8 9 10 11 12 13 14 ...53 Next

Back to top