Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    Neutron detection at the extremes of sensitivity in the cosmic environment.

    Benson, C., Joyce, M. J., O'Connell, B. & Silvie, J., 12/2000, In: IEEE Transactions on Nuclear Science. 47, 6 Part, p. 2417-2422 6 p.

    Research output: Contribution to journalJournal article

  2. Published

    Monte-Carlo Calculation of the Response Functions for Two Prototype Cosmic Neutron Metrology Instruments.

    Benson, C., Joyce, M. J., Winsby, A. & Silvie, J., 2001.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  3. Published

    Towards Reactor Dosimetry with MOSFET devices.

    Benson, C., Joyce, M. J., Kestell, D., Stevenson, D., Mathewson, A., Price, R. A. & Silvie, J., 2003, Reactor Dosimetry in the 21st Century: Proceedings of the 11th International Symposium on Reactor Dosimetry. Wagemans, J., Abderrahim, H. A., D'Hondt, P., D'hondt, P. J. & Raedt, C. D. (eds.). World Scientific Publishing Co. Pte Ltd, 756 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  4. Published

    What is the future for beam propagation methods?

    Benson, T., Hu, B., Vukovic, A. & Sewell, P., 2004, In: Proceedings of SPIE. 5579

    Research output: Contribution to journalJournal articlepeer-review

  5. Published

    1.55μm Efficient Temperature Insensitive GaSb-based Lasers for Telecoms Applications

    Bentley, M., 2021, Lancaster University. 165 p.

    Research output: ThesisDoctoral Thesis

  6. Published

    Impulse turbine injector design improvement using Computational Fluid Dynamics

    Benzon, D., Zidonis, A., Panagiotopoulos, A., Aggidis, G., Anagnostopoulos, J. & Papantonis, D., 1/04/2015, In: Journal of Fluids Engineering. 137, 4, 9 p., 041106.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    Numerical investigation of the spear valve configuration on the performance of Pelton and Turgo turbine injectors and runners

    Benzon, D., Zidonis, A., Panagiotopoulos, A., Aggidis, G., Anagnostopoulos, I. & Papantonis, D., 25/06/2015, In: Journal of Fluids Engineering. 137, 11, 8 p., 111201.

    Research output: Contribution to journalJournal articlepeer-review

  8. Published

    Development of the Turgo Impulse turbine: past and present

    Benzon, S., Aggidis, G. A. & Anagnostopoulos, J. S., 16/03/2016, In: Applied Energy. 166, p. 1-18 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  9. Published

    The Turgo impulse turbine: a CFD based approach to the design improvement with experimental validation

    Benzon, S., 2016, Lancaster University. 260 p.

    Research output: ThesisDoctoral Thesis

  10. Published

    Experimental investigation and analysis of three spear valve designs on the performance of Turgo impulse turbines

    Benzon, S., Zidonis, A., Petley, S., Aggidis, G. A., Panagiotopoulos, A., Anagnostopoulos, I. & Papantonis, D., 11/10/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  11. Published

    Machine Learning-Based Condition Monitoring for PV Systems: State of the Art and Future Prospects

    Berghout, T., Benbouzid, M., Bentrcia, T., Ma, X., Djurović, S. & Mouss, L-H., 3/10/2021, In: Energies. 14, 19, 25 p., 6316.

    Research output: Contribution to journalLiterature reviewpeer-review

  12. Published

    Machine Learning for Photovoltaic Systems Condition Monitoring: A Review

    Berghout, T., Benbouzid, M., Ma, X., Durovic, S. & Mouss, L-H., 15/11/2021, IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  13. Published

    Tritium detection by electrochemical assisted radiometrics (TRIBECA)

    Berhane, G., Boxall, C., Cave, F., Joyce, M. & Pates, J., 22/09/2019, p. 687-693. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  14. Published

    Linking atomic and mesoscopic scales for the modelling of the transport properties of uranium dioxide under irradiation

    Bertolus, M., Freyss, M., Dorado, B., Martin, G., Hoang, K., Maillard, S., Skorek, R., Garcia, P., Valot, C., Chartier, A., Van Brutzel, L., Fossati, P., Grimes, R. W., Parfitt, D. C., Bishop, C. L., Murphy, S. T., Rushton, M. J. D., Staicu, D., Yakub, E., Nichenko, S. & 6 others, Krack, M., Devynck, F., Ngayam-Happy, R., Govers, K., Deo, C. S. & Behera, R. K., 14/06/2015, In: Journal of Nuclear Materials. 462, p. 475-495 21 p.

    Research output: Contribution to journalJournal articlepeer-review

  15. Published

    Inverse kinematics for a redundant robotic manipulator used for nuclear decommissioning

    Besset, P. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  16. Published

    Bimetallic Mo-Fe Co-catalyst-based nano-carbon impregnated on PAC for optimumsuper-hydrophobicity

    Betar, B. O., Alsaadi, M. A., Chowdhury, Z. Z., Aroua, M. K., Mjalli, F. S., Dimyati, K., Hindia, M. N., Elfghi, F. M., Ahmed, Y. M. & Abbas, H. F., 28/07/2020, In: Symmetry. 12, 8, 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  17. Published

    High yield super-hydrophobic carbon nanomaterials using cobalt/iron co-catalyst impregnated on powder activated carbon

    Betar, B. O., Alsaadi, M. A., Chowdhury, Z. Z., Aroua, M. K., Mjalli, F. S. & Niazi, M. D. M., 11/01/2021, In: Processes. 9, 1, 19 p., 134.

    Research output: Contribution to journalJournal articlepeer-review

  18. Published

    Comments by the Senior Editor

    Betta, G-FD., Obryk, B., Pia, M. G., Britton, C., Cao, L. R., Dong, Z., Dreyer, J., Girard, S., Jansson, P., Joyce, M., Kouzes, R. & Lyoussi, A., 16/04/2020, In: IEEE Transactions on Nuclear Science. 67, 4, p. 543-543 1 p.

    Research output: Contribution to journalEditorialpeer-review

  19. Published

    THE EFFECTS OF ALLYL ETHERS UPON RADICAL POLYMERIZATIONS.

    Bevington, J. C., Huckerby, T. N., Hunt, B. J. & Jenkins, A. D., 2001, In: Journal of Macromolecular Science Part A Pure and Applied Chemistry. 38, 7, p. 627-640 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  20. Published

    FURTHER STUDY OF ALLYL ETHERS AND RELATED COMPOUNDS AS TRANSFER AGENTS IN RADICAL POLYMERIZATIONS.

    Bevington, J. C., Huckerby, T. N., Hunt, B. J. & Jenkins, A. D., 2001, In: Journal of Macromolecular Science Part A Pure and Applied Chemistry. 38, 10, p. 981-990 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  21. Published

    A study of an azonitrile containing a sizable fluorocarbon group.

    Bevington, J. C., Guyot, B., Huckerby, T. N., Hunt, B. J. & Jones, R., 04/2000, In: European Polymer Journal. 36, 4, p. 657-661 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  22. Published

    Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method

    Bhagate, K. A., Pawar, P., Singh, A. K. & Ye, J., 2006, III European Conference on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Motasoares, C. A., Martins, J. A. C., Rodrigues, H. C., Ambrósio, J. A. C., Pina, C. A. B., Motasoares, C. M., Pereira, E. B. R. & Folgado, J. (eds.). Berlin: Springer, p. 711-711 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    Static shape control using piezoelectric actuator

    Bhagate, K., Ye, J. & Singh, A., 2012, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures: Politecnico di Torino, 19-20 June 2012. Ferreira, A. J. M. & Carrera, E. (eds.). 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  24. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to journalJournal articlepeer-review

  25. Published

    Numerical & Experimental Flow Analysis of a Wave Energy Converter.

    Bhinder, M. A., Rahmati, M. T., Aggidis, G. A., Mingham, C. G., Chaplin, R. V. & Causon, D. M., 09/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  26. Published

    Numerical and Experimental Study of a Point Absorbing Wave Energy Converter in Regular and Irregular Waves.

    Bhinder, M. A., Rahmati, M. T., Aggidis, G. A., Chaplin, R. V., Mingham, C. G. & Causon, D. M., 06/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  27. Published

    A Joint Numerical and Experimental Study of a Surging Point Absorbing Wave Energy Converter.

    Bhinder, M. A., Rahmati, M. T., Aggidis, G. A., Chaplin, R. V., Mingham, C. G. & Causon, D. M., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  28. Published

    Numerical hydrodynamic modelling of a pitching wave energy converter

    Bhinder, M. A., Rahmati, M. T., Mingham, C. G. & Aggidis, G. A., 2015, In: European Journal of Computational Mechanics. 24, 4, p. 129-143 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  29. Published

    Editorial: Rapid Design, Prototyping and Manufacturing

    Bibb, R. (Guest ed.) & Rennie, A. E. W. (Guest ed.), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.

    Research output: Contribution to journalEditorialpeer-review

  30. Published

    Modelling leaky photonic wires: A mode solver comparison

    Bienstman, P., Selleri, S., Rosa, L., Uranus, H. P., Hopman, W. C. L., Costa, R., Melloni, A., Andreani, L. C., Hugonin, J. P., Lalanne, P., Pinto, D., Obayya, S., Dems, M. & Panajotov, K., 07/2006, In: Optical and Quantum Electronics. 38, 9-11, p. 731-759 29 p.

    Research output: Contribution to journalJournal articlepeer-review

  31. Published

    Modelling martensitic transformation in titanium alloys: The influence of temperature and deformation

    Bignon, M., Bertrand, E., Tancret, F. & Rivera-Díaz-del-Castillo, P. E. J., 1/09/2019, In: Acta Materialia. 7, 17 p., 100382.

    Research output: Contribution to journalJournal articlepeer-review

  32. Published

    Martensite formation in titanium alloys: Crystallographic and compositional effects

    Bignon, M., Bertrand, E., Rivera-Díaz-del-Castillo, P. E. J. & Tancret, F., 15/08/2021, In: Journal of Alloys and Compounds. 872, 16 p., 159636.

    Research output: Contribution to journalJournal articlepeer-review

  33. Published

    NittanySat - a student satellite mission for D-region study and calibration of riometers.

    Bilen, S. G., Philbrick, C. R., Escobar, A. C., Schratz, B. C., Thrane, E. V., Gausa, M., Dahle, K., Honary, F., Marple, S., Smith, R., Friedrich, M. & Zilaji, T., 2007, p. 407-412. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  34. Published

    Cold-test analysis of H-plane and E-plane loaded rectangular slow-ware structure

    Billa, L. R., Li, X., Huang, X., Paoloni, C., Muhammad, N. A. & Chen, X., 11/09/2017, 2017 10th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    H-Plane and E-Plane Loaded Rectangular Slow-Wave Structure for Terahertz TWT Amplifier

    Billa, L. R., Muhammad, N. A. & Chen, X., 04/2016, In: IEEE Transactions on Electron Devices. 63, 4, p. 1722-1727 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  36. Published

    Improved Design and Microfabrication of H -Plane and E -Plane Loaded Rectangular Slow-Wave Structure for THz TWT Amplifier

    Billa, L. R., Shi, X., Muhammad, N. A. & Chen, X., 05/2017, In: IEEE Transactions on Electron Devices. 64, 5, p. 2383-2389 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  37. Published

    Novel rectangular slow-wave circuit for THz traveling wave tubes

    Billa, L. R., Muhammad, N. A. & Chen, X., 14/09/2015, 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  38. Published

    Variable aperture horn antenna for millimeter wave wireless communications

    Billa, L., Paoloni, C., Letizia, R. & Lewis, E., 27/02/2020, 2019 12th UK-Europe-China Workshop on Millimeter Waves and Terahertz Technologies (UCMMT). IEEE, p. 1-4 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  39. Published

    H - and E -Plane Loaded Slow Wave Structure for W -Band TWT

    Billa, L., Akram, M. N., Paoloni, C. & Chen, X., 31/01/2020, In: IEEE Transactions on Electron Devices. 67, 1, p. 309-313 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  40. Published

    Assessing catchment-scale erosion and yields of suspended solids from improved temperate grassland.

    Bilotta, G. S., Krueger, T., Brazier, R. E., Butler, P., Freer, J., Hawkins, J. M. B., Haygarth, P. M., Macleod, C. J. A. & Quinton, J. N., 2010, In: Journal of Environmental Monitoring. 12, 3, p. 731-739 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  41. Published

    High volumetric and energy densities of methane stored in nanoporous materials at ambient temperatures and moderate pressures

    Bimbo, N., Physick, A. J., Noguera-Diaz, A., Pugsley, A., Holyfield, L. T., Ting, V. P. & Mays, T. J., 15/07/2015, In: Chemical Engineering Journal. 272, p. 38-47 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    Isosteric enthalpies for hydrogen adsorbed on nanoporous materials at high pressures

    Bimbo, N., Sharpe, J. E., Ting, V. P., Noguera-Diaz, A. & Mays, T. J., 02/2014, In: Adsorption-Journal of the International Adsorption Society. 20, 2, p. 373-384 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  43. Published

    Analysis of optimal conditions for adsorptive hydrogen storage in microporous solids

    Bimbo, N., Ting, V. P., Sharpe, J. E. & Mays, T. J., 20/11/2013, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 437, p. 113-119 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    Analysis of hydrogen storage in nanoporous materials for low carbon energy applications

    Bimbo, N., Ting, V. P., Hruzewicz-Kolodziejczyk, A. & Mays, T. J., 3/08/2011, In: Faraday Discussions. 151, 1-2, p. 59-74 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  45. Published

    High-pressure adsorptive storage in hydrogen in MIL-101 (Cr) and AX-21 for mobile applications: cryocharging and cryokinetics

    Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P. & Mays, T. J., 5/01/2016, In: Materials and Design. 89, p. 1086-1094 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  46. Published

    Corrigendum to “High-pressure adsorptive storage of hydrogen in MIL-101 (Cr) and AX-21 for mobile applications: Cryocharging and cryokinetics” [Mater & Des 89 (2016) 1086–1094]

    Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P. & Mays, T. J., 5/02/2016, In: Materials and Design. 91, p. 440 1 p.

    Research output: Contribution to journalJournal article

  47. Published
  48. Published

    High-mobility ZnO thin film transistors based on solution-processed hafnium oxide gate dielectrics

    Bin Esro, M., Vourlias, G., Somerton, C., Milne, W. I. & Adamopoulos, G., 7/01/2015, In: Advanced Functional Materials. 25, 1, p. 134-141 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    Low-voltage ZnO thin-film transistors employing Nd2O3 high-k dielectrics deposited by spray pyrolysis in air

    Bin Esro, M., Kolosov, O., Vourlias, G., Krier, A., Milne, W. I. & Adamopoulos, G., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  50. Published

    Solution processed a-LaAlO3 gate dielectrics for their applications in thin film transistors employing metal oxide semiconducting channels

    Bin Esro, M., Mazzocco, R., Vourlias, G., Krier, A., Milne, W. I., Kolosov, O. & Adamopoulos, G., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  51. Published

    Solution processed lanthanum aluminate gate dielectrics for use in metal oxide-based thin film transistors

    Bin Esro, M., Mazzocco, R., Vourlias, G., Kolosov, O., Milne, W. I. & Adamopoulos, G., 22/05/2015, In: Applied Physics Letters. 106, 5 p., 203507.

    Research output: Contribution to journalJournal articlepeer-review

  52. Published

    Solution processed SnO2:Sb transparent conductive oxide as alternative to Indium Tin Oxide for applications in Organic Light Emitting Diodes

    Bin Esro, M., Georgakopoulos, S., Lu, H., Vourlias, G., Krier, A., Milne, W. I., Gillin, W. P. & Adamopoulos, G., 28/04/2016, In: Journal of Materials Chemistry C. 4, 16, p. 3563-3570 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  53. Published

    Structural and electrical characterization of SiO2 gate dielectrics grown from solutions at moderate temperature in air

    Bin Esro, M., Kolosov, O. V., Cho, J. H., Milne, W. I. & Adamopoulos, G., 05/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  54. Published

    Structural and electrical characterization of SiO2 gate dielectrics deposited from solutions at moderate temperatures in air

    Bin Esro, M., Kolosov, O. V., Jones, P. J., Milne, W. I. & Adamopoulos, G., 10/01/2017, In: ACS Applied Materials and Interfaces. 9, 1, p. 529-536 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  55. Published

    Solution-Processed Neodymium Oxide/ZnO Thin-Film Transistors with Electron Mobility in Excess of 65 cm V−1 s−1

    Bin Esro, M., Kolosov, O. V., Stolojan, V., Jones, P. J., Milne, W. I. & Adamopoulos, G., 04/2017, In: Advanced Electronic Materials. 3, 4, 1700025.

    Research output: Contribution to journalJournal articlepeer-review

  56. Published

    Two Dimensional Microwave Tomographic Imaging of Low Water Content Tissues

    Bindu, G., Thomas, V., Lonappan, A., Ambattu, P., Anandan, CK., Hamsakutty, V. & Mathew, KT., 20/09/2005, In: Microwave and Optical Technology Letters. 46, 6, p. 599-601 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  57. Published

    Quantifying water in spent fuel assemblies with neutrons: A simulation-based approach

    Binnersley, C., Ashley, S. F., Chard, P., Lansdell, A., O'Brien, G., Shaughnessy, P. & Joyce, M. J., 31/03/2022, In: Progress in Nuclear Energy. 145, 25 p., 104110.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    Multi-frequency electromagnetic impedance spectroscopy for the detection of phase transformation during strip steel cooling.

    Binns, R., Crudgington, K., Davis, C. L., Dickinson, S. J., Morris, P. F. & Peyton, A. J., 2002, Proceedings of the metallurgy and materials conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  59. Published

    Developments in the use of electromagnetic methods to monitor cooling transformations in steel samples.

    Binns, R., Davis, C., Dickinson, S. J., Morris, P. F., Peyton, A. J., Papaelias, M. P. H., Pritchard, W. D. N. & Strangwood, M., 2002, Proceedings of the IOM conference: instrumentation to innovation - applications and developments in metal production and use.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  60. Published

    Detection of phase transformation in hot strip steel samples using a multi-frequency electromagnetic impedance measuring node.

    Binns, R., Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 11th conference on sensors and their applications. p. 45-50 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  61. Published

    Imaging steel profiles within a pouring nozzle.

    Binns, R., Lyons, A. R. A. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 138-147 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  62. Published

    Imaging molten steel flow profiles.

    Binns, R., Lyons, A. R. A., Peyton, A. J. & Pritchard, W. D. N., 08/2001, In: Measurement Science and Technology. 12, 8, p. 1132-1138 7 p.

    Research output: Contribution to journalJournal article

  63. Published

    Developments in the use of electromagnetic methods to monitor the transformation of steel samples.

    Binns, R., Johnstone, S., Morris, P. F., Peyton, A. J. & Pritchard, W. D. N., 2000, Proceedings of the institute of material conference: measurement technology and information management through the process route.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  64. Published

    Imaging molten steel flow profiles.

    Binns, R., Lyons, A. R. A., Peyton, A. J. & Pritchard, W. D. N., 2000, In: Proceedings of SPIE. 4188, p. 248-293 46 p.

    Research output: Contribution to journalJournal article

  65. Published

    Developments in the use of electromagnetic methods to monitor the transformation of steel samples.

    Binns, R. & Peyton, A. J., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000). Penang, Malaysia, p. 155-162 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  66. Published

    Using electromagnetic methods to monitor phase transformation in steel samples.

    Binns, R., Johnstone, S., Mallinson, S., Meydan, T. & Peyton, A. J., 1999, Proceedings of the institute of material conference: advances in on-line instrumentation for finishing processes in strip production. London

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  67. Published

    A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium.

    Bissessur, Y. & Peyton, A. J., 2002, Proceedings of the 2nd international symposium on process tomography.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  68. Published

    Image reconstruction for electromagnetic inductance tomography employing a parameterized finite-element-based forward model.

    Bissessur, Y. & Peyton, A. J., 2001, In: Proceedings of SPIE. 4188, p. 261-272 12 p.

    Research output: Contribution to journalJournal article

  69. Published

    The Role of Ontologies in Emergent Middleware: Supporting Interoperability in Complex Distributed Systems

    Blair, G., Bennaceur, A., Georgantas, N., Grace, P., Issarny, V., Nundloll-Ramdhany, V. & Paolucci, M., 12/2011, Proceedings of ACM/IFIP/USENIX 12th International Middleware Conference (Middleware 2011). Kon, F. & Kermarrec, A-M. (eds.). Berlin: Springer Verlag, p. 410-430 21 p. (Lecture Notes in Computer Science; vol. 7049).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  70. Published

    Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  71. Published

    Directing self-assembly to grow adaptive physical structures

    Blaney, A., Dunn, N. S., Alexander, J. M., Richards, D., Rennie, A. E. W. & Anwar, J., 8/02/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 114-133 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  72. Published

    Adaptive Materials: Utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Rennie, A. & Anwar, J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  73. Published

    Coupling self-assembling materials with digital designs to grow adaptive structures

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Doursat, R., Rennie, A. & Anwar, J., 2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  74. Published

    N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application.

    Boampong, D. K., Green, S. M. & Unsworth, A., 2003, In: Journal of Applied Biomaterials and Biomechanics. 1, p. 164-171 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  75. Published

    Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  76. Published

    Rapid design, prototyping and manufacture: proceedings of the seventh national conference on

    Bocking, C. E. (ed.), Rennie, A. E. W. (ed.) & Jacobson, D. M. J. (ed.), 2006, MJA Print. 134 p.

    Research output: Book/Report/ProceedingsBook

  77. Published

    Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports

    Bocking, C. E. (ed.), Rennie, A. (ed.) & Jacobson, D. M. (ed.), 2003, Professional Engineering Publishing. 330 p.

    Research output: Book/Report/ProceedingsBook

  78. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  79. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  81. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  82. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  83. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on

    Bocking, C. E. (ed.) & Rennie, A. (ed.), 06/2012, High Wycombe: CRDM Ltd. 109 p.

    Research output: Book/Report/ProceedingsProceedings

  84. Published

    Distribution ratios of lipase-catalyzed reaction products in ionic liquid supercritical CO2 systems: resolution of 2-octanol enantiomers

    Bogel-Lukasik, R., Najdanovic, V., Barreiros, S. & da Ponte, M. N., 2/07/2008, In: Industrial and Engineering Chemistry Research. 47, 13, p. 4473-4480 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  85. Published

    Hydrogenation of CO(2)-Expanded Liquid Terpenes: Phase Equilibrium-Controlled Kinetics

    Bogel-Lukasik, E., Serbanovic, A., Bogel-Lukasik, R., Banet-Osuna, A., Najdanovic-Visak, V. & da Ponte, M. N., 2009, Gas-expanded liquids and near-critcial media : green chemistry and engineering. Hutchenson, K. W., Scurto, A. M. & Subramaniam, B. (eds.). Washington, D.C.: American Chemical Society, p. 191-201 11 p. (ACS Symposium Series; vol. 1006).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  86. Published

    I&EC 90-Hydrogenation of CO2-expanded liquid terpenes: Phase equilibrium-controlled kinetics

    Bogel-Lukasik, E., Serbanovic, A., Bogel-Lukasik, R., Banet-Osuna, A., Najdanovic-Visak, V. & da Ponte, M. N., 19/08/2007, In: Abstracts of Papers of the American Chemical Society. 234, 1 p.

    Research output: Contribution to journalMeeting abstractpeer-review

  87. Published

    Method for deposition of ceramic films

    Bone, A., Dawson, R. & Leah, R., 23/07/2009, IPC No. C04B41/87; C04B41/89; C23C18/12; H01M8/12, Patent No. WO2009090419 (A2)

    Research output: Patent

  88. Published

    METHOD FOR PREPARING SOFC ELECTROLYTE

    Bone, A., Leah, R. & Dawson, R. J., 30/09/2015, Patent No. EA021907 (B1), 30/08/2011, Priority date 13/06/2008, Priority No. EA20110070017 20090430

    Research output: Patent

  89. Published

    A parallel 3D unstructured implicit RANS solver for compressible and incompressible CFD simulations

    Bonfiglioli, A., Campobasso, S., Carpentieri, B. & bollhoefer, M., 2012, Parallel Processing and Applied Mathematics: 9th International Conference, PPAM 2011, Torun, Poland, September 11-14, 2011. Revised Selected Papers, Part II. Wyrzykowski, R., Dongarra, J., Karczewski, K. & Waśniewski, J. (eds.). Berlin: Springer, p. 312-322 11 p. (Lecture Notes in Computer Science; vol. 7203).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  90. Published

    Phosphatidylinositol 4,5-bisphosphate specific phospholipase C in Pharbitis nil membranes.

    Bonner, P. L. R., Prior, S., Hetherington, A. M. & Lumsden, P. J., 1992, In: Biologia Plantarum. 34, 5-6, p. 367-372 6 p.

    Research output: Contribution to journalJournal article

  91. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to journalMeeting abstractpeer-review

  92. Published

    Process design of continuous biodiesel production by reactive distillation: comparison between homogeneous and heterogeneous catalysts

    Boon-anuwat, N., Kiatkittipong, W., Aiouache, F. & Assabumrungrat, S., 06/2015, In: Chemical Engineering and Processing: Process Intensification. 92 , p. 33-44 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  93. Published

    Excitation and trapping of lower hybrid waves in striations

    Borisov, N. & Honary, F., 3/12/2008, In: Physics of Plasmas. 15, 12, 11 p., 122901.

    Research output: Contribution to journalJournal articlepeer-review

  94. Published

    Trapping of lower hybrid waves in elongated plasma depletions in the earth's ionosphere

    Borisov, N. & Honary, F., 31/03/2008, In: Physics Letters A. 372, 14, p. 2440-2445 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  95. Published

    Stationary state and relaxation of artificial irregularities excited in ionospheric heating experiments

    Borisov, N., Senior, A. & Honary, F., 05/2005, In: Journal of Plasma Physics. 71, 3, p. 315-334 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion

    Borodachenkova, M., Barlat, F., Wen, W., Bastos, A. & Grácio, J. J., 2015, In: International Journal of Plasticity. 68, p. 150-163 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  97. Published

    Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading

    Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2015, In: Journal of Materials Processing Technology. 224, p. 143-148 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  98. Published

    Numerical simulation of the mechanical response during strain path change: Application to Zn alloys

    Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2014, In: Procedia Engineering. 81, p. 1300-1305 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  99. Published

    Bioloistic delivery of Ca2+ dyes into plant and algal cells.

    Bothwell, J. H. F., Brownlee, C., Hetherington, A. M., Ng, C. K-Y., Wheeler, G. L. & McAinsh, M., 04/2006, In: Plant Journal. 46, 2, p. 327-335 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  100. Published

    LIGA-based Slow Wave Structure for a THz Vacuum Amplifier

    Bouamrane, F., Bouvet, T., Megtert, S., Brunetti, F., Mineo, M., Paoloni, C., Tamburri, E., Terranova, M. L., Ulisse, G., Di Carlo, A., Marchesin, R., Pham, K., Durand, A. J., Kotiranta, M., Krozer, V., Guiset, P., De Rossi, A., Schnell, J. P., Legagneux, P., Dolfi, D. & 6 others, Fiorello, A. M., Dispenza, M., Secchi, A., Zhurbenko, V., Gohier, A. & Cojocaru, C-S., 06/2011, Proceedings of High Aspect Ratio Micro Structure Conference HARMST 2011. Taiwan, 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

Previous 1...3 4 5 6 7 8 9 10 ...53 Next

Back to top