Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    Recursive decoding algorithms for hamming codes.

    Zyablov, V., Potapov, V., Sidorenko, V., Markarian, G. S. & Honary, B., 1993, 2nd International Symposium Communication Theory & Applications. Ambleside, UK, p. 18-21 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  2. Published

    New low complexity soft maximum likelihood decoding of partial unit memory codes.

    Zyablov, V. V., Honary, B. & Markarian, G. S., 1993, Proceedings of the IEEE international symposium of information theory. USA: San Antonio, p. 23-23 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  3. Published

    Quality of Service consideration for the wireless telemedicine and e-health services.

    Zvikhachevskaya, A., Markarian, G. & Mihaylova, L., 6/04/2009, IEEE Wireless Communications and Networking Conference, 2009. WCNC 2009.. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  4. Published

    A study of the sharp yield point of a Ti-22Al-25Nb alloy

    Zong, Y., Shao, B., Tian, Y. & Shan, D., 15/04/2017, In: Journal of Alloys and Compounds. 701, p. 727-731 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  5. Published

    Surface plasmon resonance assisted rapid laser joining of glass

    Zolotovskaya, S. A., Tang, G., Wang, Z. & Abdolvand, A., 25/08/2014, In: Applied Physics Letters. 105, 8, 5 p., 083109.

    Research output: Contribution to journalJournal articlepeer-review

  6. Published

    Stable dual-wavelength operation of InGaAs diode lasers with volume Bragg gratings

    Zolotovskaya, S. A., Daghestani, N., Venus, G. B., Glebov, L. B., Smirnov, V. I. & Rafailov, E. U., 22/10/2007, In: Applied Physics Letters. 91, 17, 3 p., 171113.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    p-i-n junction quantum dot saturable absorber mirror: electrical control of ultrafast dynamics

    Zolotovskaya, S., Butkus, M., Haring, R., Able, A., Kaenders, W., Krestnikov, I. L., Livshits, D. A. & Rafailov, E. U., 2012, In: Optics Express. 20, 8, p. 9038-9045 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  8. Published

    Second-harmonic conical refraction: observation of free and forced harmonic waves

    Zolotovskaya, S., Abdolvand, A., Kalkandjiev, T. K. & Rafailov, E. U., 04/2011, In: Applied Physics B. 103, 1, p. 9-12 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  9. Published

    Electronically controlled pulse duration passively mode-locked Cr:forsterite laser

    Zolotovskaya, S., Wilcox, K. G., Abdolvand, A., Livshits, D. A. & Rafailov, E. U., 15/08/2009, In: IEEE Photonics Technology Letters. 21, 16, p. 1124-1126 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  10. Published

    Two-colour output from InGaAs laser with multiplexed reflective Bragg mirror

    Zolotovskaya, S., Smirnov, V. I., Venus, G. B., Glebov, L. B. & Rafailov, E. U., 1/08/2009, In: IEEE Photonics Technology Letters. 21, 15, p. 1093-1095 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Absorption saturation properties and laser Q-switch performance of Cr5+-doped YVO4 crystal

    Zolotovskaya, S., Yumashev, K. V., Kuleshov, N. V., Matrosov, V. N., Matrosova, T. A. & Kupchenko, M. I., 03/2007, In: Applied Physics B. 86, 4, p. 667-671 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  12. Published

    Nonlinear properties of phototropic media on the basis of CuxSe nanoparticles in quartz glass

    Zolotovskaya, S., Posnov, N. N., Prokosin, P. V., Yumashev, K. V., Gurin, V. S. & Alexeenko, A. A., 07/2004, In: Semiconductors. 38, 7, p. 812-817 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    Nonlinear optical properties and Q-switch performance of silica glasses doped with CuxSe nanoparticles

    Zolotovskaya, S., Savitski, V. G., Prokoshin, P. V., Yumashev, K. V., Gurin, V. S. & Alexeenko, A. A., 1/07/2006, In: Journal of the Optical Society of America B. 23, 7, p. 1268-1275 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  14. Published

    Nd:KGd(WO4)2 laser at 1.35 μm passively Q-switched with V3+:YAG crystal and PbS-doped glass

    Zolotovskaya, S., Savitski, V. G., Gaponenko, M. S., Malyarevich, A. M., Yumashev, K. V., Demchuk, M. I., Raaben, H., Zhilin, A. A. & Nejezchleb, K., 06/2006, In: Optical Materials. 28, 8-9, p. 919-924 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  15. Published

    Diode-pumped Yb,Er:glass laser passively Q switched with a V3+:YAG crystal

    Zolotovskaya, S., Yumashev, K. V., Kuleshov, N. V. & Sandulenko, A. V., 21/03/2005, In: Applied Optics. 44, 9, p. 1704-1708 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  16. Published

    On second harmonic generation and multiphoton-absorption induced luminescence from laser-reshaped silver nanoparticles embedded in glass

    Zolotovskaya, S., Tyrk, M. A., Stalmashonak, A., Gillespie, W. A. & Abdolvand, A., 23/09/2016, In: Nanotechnology. 27, 43, 8 p., 435703.

    Research output: Contribution to journalJournal articlepeer-review

  17. Published

    Sensing platform based on laser-engineered nanocomposite glass

    Zolotovskaya, S. & Abdolvand, A., 5/09/2016, Photon16. IOP Publishing Ltd, p. 79 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNAbstract

  18. Published

    Automatic gain control for propagation analysis and countermeasures

    Zolghadr, F., Honary, B. & Maundrell, M., 1991, HF Radio Systems and Techniques, 1991., Fifth International Conference on. IEEE, p. 206-211 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  19. Published

    Gap waveguides for millimeter wave slow wave structures

    Zied Abozied, A. & Letizia, R., 28/04/2021.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  20. Published

    Parametric optimisation of two Pelton turbine runner designs using CFD

    Zidonis, A., Panagiotopoulos, A., Aggidis, G., Anagnostopoulos, J. & Papantonis, D., 2015, In: Journal of Hydrodynamics. 27, 3, p. 840-847 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  21. Published

    State of the art in numerical modeling of Pelton turbines

    Zidonis, A. & Aggidis, G., 05/2015, In: Renewable and Sustainable Energy Reviews. 45, p. 135-144 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  22. Published

    Pelton turbine: identifying the optimum number of buckets using CFD

    Zidonis, A. & Aggidis, G., 02/2016, In: Journal of Hydrodynamics. 28, 1, p. 75-83 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  23. Published

    Development of hydro impulse turbines and new opportunities

    Zidonis, A., Benzon, D. & Aggidis, G., 11/2015, In: Renewable and Sustainable Energy Reviews. 51, p. 1624–1635 12 p., RSER4610.

    Research output: Contribution to journalJournal articlepeer-review

  24. Published

    Optimisation and efficiency improvement of pelton hydro turbine using computational fluid dynamics and experimental testing

    Zidonis, A., 2015, Lancaster University. 197 p.

    Research output: ThesisDoctoral Thesis

  25. Published

    Experimental investigation and analysis of the spear valve design on the performance of Pelton turbines: 3 case studies

    Zidonis, A., Benzon, S., Panagiotopoulos, A., Petley, S., Aggidis, G. A., Anagnostopoulos, I. & Papantonis, D., 11/10/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  26. Published

    Numerical modelling of a large-scale UV-LED reactor performance – a case study

    Zidonis, A., Autin, O., Shah, J. & Aggidis, G., 8/06/2021.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  27. Published

    Luminous efficiency enhancement of WLEDs via patterned RGB phosphor arrays

    Zhu, H., Liu, X., Fu, R., Shi, Y., Wang, H., He, Q. & Song, X., 31/07/2019, In: JOURNAL OF LUMINESCENCE. 211, p. 1-7 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  28. Published

    Multi-colour light emission based on pixel-array phosphor layer in LEDs

    Zhu, H., Fu, R., Shi, Y., He, Q., Wang, H. & Liu, X., 31/05/2020, In: JOURNAL OF LUMINESCENCE. 221, 6 p., 117057.

    Research output: Contribution to journalJournal articlepeer-review

  29. E-pub ahead of print

    Real-time Defect Detection of Die Cast Rotor in Induction Motor Based on Circular Flux Sensing Coils

    Zhu, Q., Wang, X., Wang, H., Xia, M., Lu, S., Liu, B., Li, G. & Cao, W., 20/12/2021, In: IEEE Transactions on Industrial Informatics.

    Research output: Contribution to journalJournal articlepeer-review

  30. Published

    Optimal algorithms for wavelet-based denoising in PD measurement.

    Zhou, C., Ma, X. & Kemp, I. J., 08/2003. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  31. Published

    A modelling study of the multiphase leakage flow from pressurised CO2 pipeline

    Zhou, X., Li, K., Tu, R., Yi, J., Xie, Q. & Jiang, X., 5/04/2016, In: Journal of Hazardous Materials. 306, p. 286-294 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  32. Published

    The effects of chemical kinetic mechanisms on large eddy simulation (LES) of a nonpremixed hydrogen jet flame

    Zhou, X., Jiang, X. & Mira Martinez, D., 13/07/2016, In: International Journal of Hydrogen Energy. 41, 26, p. 11427-11440 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  33. Published
  34. Published

    Electric-field-assisted facile synthesis of metal nanoparticles

    Zhou, Q., Zhang, J., Saba, T., Yue, Z., Li, W., Anderson, J. A. & Wang, X., 7/01/2019, In: ACS Sustainable Chemistry & Engineering. 7, 1, p. 1271-1278 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  35. Published

    A case study of using cosmic ray muons to monitor supercritical CO2 migration in geological formations

    Zhong, J. & Jiang, X., 1/01/2017, In: Applied Energy. 185, 2, p. 1450-1458 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  36. Published

    A study of using cosmic-ray muon radiography to detect CO2 leakage from a primary storage into geological formations

    Zhong, J. & Jiang, X., 05/2016, In: Environmental Earth Sciences. 75, 13 p., 912.

    Research output: Contribution to journalJournal articlepeer-review

  37. Published

    Accurate a priori signal integrity estimation using a multilevel dynamic interconnect model for deep submicron VLSI design.

    Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 2000, Proceedings of the 26th European Solid-State Circuits Conference, 2000. ESSCIRC '00.. IEEE, p. 352-355 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  38. Published

    Large-eddy simulation of mixing and combustion in a premixed swirling combustor with synthesis gases

    Zheng, Y., Zhu, M., Mira Martinez, D. & Jiang, X., 15/12/2013, In: Computers and Fluids. 88, p. 702-714 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  39. Published

    The resonant frequencies of cavities with arbitrary shapes using 3-dimensional FDTD algorithm in non-orthogonal coordinates.

    Zhao, L., Carter, R. G. & Wang, P., 1993, Proceedings of the Asia-Pacific microwave conference. Taiwan

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  40. Published

    The solution of waveguide eigenvalues with arbitrary shapes by FD-FD algorithm in curvilinear coordinates.

    Zhao, L. & Carter, R. G., 1992, 22nd European microwave conference : conference proceedings, Monday 24th to Thursday 27th August 1992, Helsinki University of Technology, Espoo, Finland. Räisänen, A. (ed.). Tunbridge Wells: Microwave Exhibitions and Publishers

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  41. Published

    The improvement of the output performance of a low-energy medical standing-wave accelerator.

    Zhao, H. B., Carter, R. G., Hannaford, C. D., Zhou, P. & Hughes, E. A., 03/1995, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 356, 2-3, p. 552-557 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    The influence of boundary-conditions on resonant frquencies of cavities in 3-D FDTD algorithm using nonorthogonal coordinates.

    Zhao, L., Tong, L. S. & Carter, R. G., 09/1994, In: IEEE Transactions on Magnetics. 30, 5, Par, p. 3570-3573 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  43. Published

    Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent

    Zhao, C., Chen, X., Anthony, E. J., Jiang, X., Duan, L., Wu, Y., Dong, W. & Zhao, C., 12/2013, In: Progress in Energy and Combustion Science. 39, 6, p. 515-534 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    Salt-metal feedstocks for the creation of stochastic cellular structures with controlled relative density by powder bed fabrication

    Zhao, G., Ashcroft, I. A., Hague, R. J. M., Kennedy, A. R. & Clare, A. T., 5/07/2018, In: Materials and Design. 149, p. 63-72 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  45. Published

    Modelling strengthening mechanisms in beta-type Ti alloys

    Zhao, G-H., Liang, X. Z., Kim, B. & Rivera-Díaz-del-Castillo, P. E. J., 22/05/2019, In: Materials Science and Engineering: A. 756, p. 156-160 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  46. Published

    Microstructural evolution and strain-hardening in TWIP Ti alloys

    Zhao, G-H., Xu, X., Dye, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/01/2020, In: Acta Materialia. 183, p. 155-164 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    Effects of Structure and Constituent of Prussian Blue Analogs on Their Application in Oxygen Evolution Reaction

    Zhao, D., Lu, Y. & Ma, D., 14/05/2020, In: Molecules. 25, 10, 26 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  48. Published

    Alloy design by tailoring phase stability in commercial Ti alloys

    Zhao, G-H., Liang, X. Z., Xu, X., Gamża, M. B., Mao, H., Louzguine-Luzgin, D. V. & Rivera-Díaz-del-Castillo, P. E. J., 20/05/2021, In: Materials Science and Engineering: A. 815, 10 p., 141229.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    Photoelectrophoresis of colloidal iron oxides 1. Hematite (α-Fe2O3)

    ZHANG, Z., BOXALL, C. & KELSALL, G. H., 29/06/1993, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 73, p. 145-163 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  50. Published

    The simulation and modelling of safety systems for construction robots.

    Zhang, L., Bradley, D. A. & Seward, D. W., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 224-229 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  51. Published

    Accuracy improvement of machine tools by computer real-time control.

    Zhang, C., Margrave, F. W. & Bradshaw, A., 1994, Proceedings of the annual meeting of the American society for precision engineers. Cincinnati

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  52. Published

    Safety critical systems for robot excavation.

    Zhang, L. B. & Seward, D. W., 1993, Automation and robotics in construction X : proceedings of the 10th International Symposium on Automation and Robotics in Construction (ISARC) Houston, Texas, U.S.A., 24-26 May, 1993. Watson, G. H., Tucker, R. L. & Walters, J. K. (eds.). Amsterdam ; London: Elsevier, p. 109-116 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  53. Published

    A fault-tolerant MEF peptide synthesizer using control and direct sensing electrodes employing current and impedance tests

    Zhang, X., Kerkhoff, H. G., Mailly, F., Nouet, P., Liu, H. & Richardson, A., 1/06/2007, 13th International mixed signals testing workshop and 3rd international GHz/Gbps test workshop, Póvoa de Varzim, Portugal. Portugal: University of Porto, p. 176-181 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  54. Published

    Numerical simulations of buoyant reactive jets with sidewall effects

    Zhang, H. P., Jiang, X., Wang, W., Yang, Y., Xu, L. & Fan, W. C., 10/2004, In: Chinese Science Bulletin. 49, 19, p. 2105-2109 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  55. Published

    Free-edge and ply cracking effect in angle-ply laminated composites subjected to in-plane loads

    Zhang, D., Ye, J. & Lam, D., 12/2007, In: Journal of Engineering Mechanics. 133, 12, p. 1268-1277 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  56. Published

    Properties degradation induced by transverse cracks in general symmetric laminates

    Zhang, D., Ye, J. & Lam, D., 15/08/2007, In: International Journal of Solids and Structures. 44, 17, p. 5499-5517 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  57. Published

    Free-edge and ply cracking effect in cross-ply laminated composites under uniform extension and thermal loading

    Zhang, D., Ye, J. & Sheng, H. Y., 12/2006, In: Composite Structures. 76, 4, p. 314-325 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    Ply cracking and stiffness degradation in cross-ply laminates under biaxial extension, bending and thermal loading

    Zhang, D., Ye, J. & Lam, D., 09/2006, In: Composite Structures. 75, 1-4, p. 121-131 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  59. Published

    Prediction of failure envelopes and stress strain curves of fiber composite laminates under triaxial loads: comparison with experimental results

    Zhang, D., Xu, L. & Ye, J., 03/2013, In: Journal of Composite Materials. 47, 6-7, p. 763-776 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  60. Published

    Improved control of individual blade pitch for wind turbines

    Zhang, D., Cross, P., Ma, X. & Li, W., 15/08/2013, In: Sensors and Actuators A: Physical. 198, p. 8-14 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  61. Published

    Wave tank experiments on the power capture of a multi-axis wave energy converter

    Zhang, D., Aggidis, G., Wang, Y., Gu, X., Li, W. & Chen, Y., 09/2015, In: Journal of Marine Science and Technology. 20, 3, p. 520-529 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  62. Published

    Mathematical modelling of batch sedimentation subject to slow aggregate densification

    Zhang, Y., Grassia, P., Martin, A., Usher, S. & Scales, P., 25/05/2015, In: Chemical Engineering Science. 128, p. 54-63 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Fault ride-through analysis and protection of a 2-MW DFIG tidal current turbine

    Zhang, D., Chen, Y., Yang, J., Tan, M., Ma, X. & Li, W., 1/09/2015, In: Marine Technology Society Journal . 49, 5, p. 49-57 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  64. Published

    Designing thickeners by matching hindered settling and gelled suspension zones in the presence of aggregate densification

    Zhang, Y., Grassia, P., Martin, A., Usher, S. P. & Scales, P. J., 29/09/2015, In: Chemical Engineering Science. 134, p. 297-307 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  65. Published

    Simultaneous fault detection and sensor selection for condition monitoring of wind turbines

    Zhang, W. & Ma, X., 12/04/2016, In: Energies. 9, 4, 15 p., 280.

    Research output: Contribution to journalJournal articlepeer-review

  66. Published

    High energy beam THz backward wave oscillator based on double corrugated waveguide

    Zhang, J., Paoloni, C., Letizia, R., Luhmann Jr., N. C., Popovic, B., Himes, L., Barchfeld, R., Gamzina, D., Feng, J., Li, L., Pan, P., Tang, Y. & Zhang, F., 19/04/2016, 2016 IEEE International Vacuum Electronics Conference (IVEC). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  67. Published

    Effect of doubly fed induction generatortidal current turbines on stability of a distribution grid under unbalanced voltage conditions

    Zhang, D., Ma, X., Si, Y., Huang, C., Huang, B. & Li, W., 13/02/2017, In: Energies. 10, 2, 14 p., 212.

    Research output: Contribution to journalJournal articlepeer-review

  68. E-pub ahead of print

    W-band klystron upconverter driven by pseudospark-sourced electron beam

    Zhang, L., Yin, H., Zhao, J., He, W., Cross, A. W., Burt, G. C., Lingwood, C. J. & Paoloni, C., 24/04/2017. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  69. Published

    A novel surface-cluster approach towards transient modeling of hydro-turbine governing systems in the start-up process

    Zhang, H., Chen, D., Guo, P., Luo, X. & Aggidis, G., 1/06/2018, In: Energy Conversion and Management. 165, p. 861-868 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  70. Published

    Nature rules hidden in the biomimetic wave energy converters

    Zhang, H. & Aggidis, G. A., 1/12/2018, In: Renewable and Sustainable Energy Reviews. 97, p. 28-37 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    Use of MCNP Simulation for the Tomographic Inspection of Airport Luggage Using Neutron and Gamma Ray Methods

    Zhang, G., Silfhout, R. V., Peyton, A. J., Joyce, M. J., Aspinall, M. D., Boston, A. J., Nolan, P. J. & Hawkes, N. P., 2009, What Where When: Multi-dimensional Advances for Industrial Process Monitoring . University of Leeds, p. 341-353 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  72. Published

    Continuous hydrothermal synthesis of extensive 2D sodium titanate (Na 2Ti3O7) nano-sheets

    Zhang, Z., Goodall, J. B. M., Brown, S., Karlsson, L., Clark, R. J. H., Hutchison, J. L., Rehman, I. U. & Darr, J. A., 2010, In: Dalton Transactions. 39, 3, p. 711-714 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  73. Published

    Sub-surface imaging of soiled cotton fabric using full-field optical coherence tomography

    Zhang, Z., Ikpatt, U., Lawman, S., Williams, B. M., Zheng, Y., Lin, H. & Shen, Y., 13/05/2019, In: Optics Express. 27, 10, p. 13951-13964 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  74. Published

    Differentiating Generic versus Branded Pharmaceutical Tablets Using Ultra-High-Resolution Optical Coherence Tomography

    Zhang, Z., Williams, B. M., Zheng, Y., Lin, H. & Shen, Y., 17/05/2019, In: Coatings. 9, 5, 8 p., 326.

    Research output: Contribution to journalJournal articlepeer-review

  75. Published

    Minimally invasive neutron beam monitoring for single-event effects accelerated testing

    Zhang, L. H. & Platt, S. P., 1/12/2011, RADECS 2011 - 12th European Conference on Radiation and Its Effects on Component and Systems, Conference Proceedings. p. 945-949 5 p. 6131336. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  76. Published

    In-situ neutron dosimetry for single-event effect accelerated testing

    Zhang, L. H., Platt, S. P., Edwards, R. H. & Allabush, C., 1/08/2009, In: IEEE Transactions on Nuclear Science. 56, 4, p. 2070-2076 7 p., 5204744.

    Research output: Contribution to journalJournal articlepeer-review

  77. E-pub ahead of print

    Fast–slow dynamic behaviors of a hydraulic generating system with multi-timescales

    Zhang, J., Chen, D., Zhang, H., Xu, B., Li, H., Aggidis, G. A. & Chatterton, S., 29/06/2019, In: JVC/Journal of Vibration and Control. 0, 0, 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  78. Published

    Experimental results from wave tank trials of a multi-axis wave energy converter

    Zhang, D., Aggidis, G., Wang, Y., McCabe, A. & Li, W., 2/09/2013, In: Applied Physics Letters. 103, 10, 4 p., 103901.

    Research output: Contribution to journalJournal articlepeer-review

  79. Published

    Constructing magnetic Si-C-Fe hybrid microspheres for room temperature nitroarenes reduction

    Zhang, X., Chen, L., Yun, J., Wang, X. & Kong, J., 26/04/2017, In: Journal of Materials Chemistry A. 5, 22, p. 10986-10997 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  80. Published

    Effect of positive/negative electrode ratio on cold metal transfer welding of 6061 aluminum alloy

    Zhang, P., Li, G., Yan, H. & Tian, Y., 29/02/2020, In: International Journal of Advanced Manufacturing Technology. 106, 3-4, p. 1453-1464 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  81. Published

    Magnetic-field-assisted laser cladding in the preparation of a crack-free Fe-Cr-Mo-C-Y-B amorphous coating on steel

    Zhang, Q., Zhang, P., Yan, H., Yu, Z., Wu, D., Shi, H., Li, S. & Tian, Y., 29/02/2020, In: Philosophical Magazine Letters. 100, 2, p. 86-93 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  82. Published

    Unraveling and manipulating of NADH oxidation by photo-generated holes

    Zhang, S., Shi, J., Chen, Y., Huo, Q., Li, W., Wu, Y., Sun, Y., Zhang, Y., Wang, X. & Jiang, Z., 1/05/2020, In: ACS Catalysis. 10, 9, p. 4967-4972 6 p.

    Research output: Contribution to journalLetterpeer-review

  83. Published

    Nanocarbon Catalysts: Recent Understanding Regarding the Active Sites

    Zhang, L-H., Shi, Y., Wang, Y. & Raveendran, S., 4/03/2020, In: Advanced Science. 7, 5, 14 p., 1902126.

    Research output: Contribution to journalJournal articlepeer-review

  84. Published

    Designing effective solid catalysts for biomass conversion: Aerobic oxidation of ethyl lactate to ethyl pyruvate

    Zhang, W., Ensing, B., Raveendran, S. & Rothenberg, G., 9/02/2018, In: Green Chemistry. 20, 8, p. 1866-1873 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  85. Published

    Highly Selective Oxidation of Ethyl Lactate to Ethyl Pyruvate Catalyzed by Mesoporous Vanadia–Titania

    Zhang, W., Innocenti, G., Oulego, P., Gitis, V., Wu, H., Ensing, B., Cavani, F., Rothenberg, G. & Shiju, N. R., 13/02/2018, In: ACS Catalysis. 8, 3, p. 2365-2374 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  86. Published

    Understanding the oxidative dehydrogenation of ethyl lactate to ethyl pyruvate over vanadia/titania

    Zhang, W., Innocenti, G., Ferbinteanu, M., Ramos-Fernandez, E. V., Sepulveda-Escribano, A., Wu, H., Cavani, F., Rothenberg, G. & Shiju, N. R., 19/02/2018, In: Catalysis Science and Technology. 8, 15, p. 3737-3747 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  87. Published

    Selective Aerobic Oxidation of Lactate to Pyruvate Catalyzed by Vanadium-Nitrogen-Doped Carbon Nanosheets

    Zhang, W., Oulego, P., Slot, T. K., Rothenberg, G. & Shiju, N. R., 7/08/2019, In: ChemCatChem. 11, 15, p. 3381-3387 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  88. Published

    Effect of zinc on the fracture behavior of galvanized steel/6061 aluminum alloy by laser brazing

    Zhang, P., Shi, H., Tian, Y., Yu, Z. & Wu, D., 1/01/2021, In: Welding in the World. 65, p. 13–22 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  89. Published

    Microstructure and Properties of an Al 6061/Galvanized Plate Fabricated by CMT Welding

    Zhang, Q., Zhang, P., Yu, Z., Yan, H., Shi, H., Wu, D., Li, S. & Tian, Y., 8/10/2020, In: Journal Wuhan University of Technology, Materials Science Edition. 35, 5, p. 937-945 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  90. Published

    Fabrication, microstructure and micromechanical properties of Fe-based metallic glass coating manufactured by laser

    Zhang, P., Zhang, Q., Yan, H., Yu, Z., Yang, J., Chen, J., Wu, D., Shi, H., Tian, Y., Ma, S. & Lei, W., 15/01/2021, In: Surface and Coatings Technology. 405, 14 p., 126726.

    Research output: Contribution to journalJournal articlepeer-review

  91. Published

    A review on the effect of laser pulse shaping on the microstructure and hot cracking behavior in the welding of alloys

    Zhang, P., Jia, Z., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Chen, J., Wang, F. & Tian, Y., 1/08/2021, In: Optics and Laser Technology. 140, 20 p., 107094.

    Research output: Contribution to journalJournal articlepeer-review

  92. Published

    Effect of deposition rate on microstructure and mechanical properties of wire arc additive manufacturing of Ti-6Al-4V components

    Zhang, P-L., Jia, Z-Y., Yan, H., Yu, Z-S., Wu, D., Shi, H-C., Wang, F-X., Tian, Y-T., Ma, S-Y. & Lei, W-S., 30/04/2021, In: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology). 28, 4, p. 1100-1110 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  93. Published

    Tunable polarization-sensitive, long-wave infrared MDM subwavelength grating structure with wide-angle, narrow-band, and high absorption

    Zhang, L., Zheng, Y., Zhang, J., Yin, Y., Li, Q., Lei, J. & Zhu, Y., 23/06/2021, In: Optics Express. 29, 14, p. 21473-21491 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  94. Published

    Optimizing Converter Layer and Active Volume Thickness for Gallium Nitride Neutron Detectors

    Zhang, Z. & Aspinall, M., 12/08/2021, 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). Boston, MA, USA: IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  95. E-pub ahead of print

    Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review

    Zhang, P., Tan, J., Tian, Y., Yan, H. & Yu, Z., 28/02/2022, In: International Journal of Advanced Manufacturing Technology. 118, 7-8, p. 2017-2057 41 p.

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    Comparison of Neutron Detection Performance of Four Thin-Film Semiconductor Neutron Detectors Based on Geant4

    Zhang, Z. & Aspinall, M., 27/11/2021, In: Sensors. 21, 15 p., 7930.

    Research output: Contribution to journalJournal articlepeer-review

  97. Published

    Discrete element modeling of metal skinned sandwich composite panels subject to uniform load

    Zha, X., Wan, C., Fan, Y. & Ye, J., 1/03/2013, In: Computational Materials Science. 69, p. 73-80 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  98. Published

    Numerical modeling of supercritical carbonation process in cement-based materials

    Zha, X., Yu, M., Ye, J. & Feng, G., 06/2015, In: Cement and Concrete Research. 72, p. 10-20 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  99. Published

    Leaching resistance of hazardous waste cement solidification after accelerated carbonation

    Zha, X., Wang, H., Xie, P., Wang, C., Dangla, P. & Ye, J., 09/2016, In: Cement and Concrete Composites. 72, p. 125-132 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  100. Published

    Effect of supercritical carbonation on the strength and heavy metal retention of cement-solidified fly ash

    Zha, X., Ning, J., Saafi, M., Dong, L., Dassekpo, J-BM. & Ye, J., 1/06/2019, In: Cement and Concrete Research. 120, p. 36-45 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  101. Published

    Oxygen generating polymeric nano fibers that stimulate angiogenesis and show efficient wound healing in a diabetic wound model

    Zehra, M., Zubairi, W., Hasan, A., Butt, H., Ramzan, A., Azam, M., Mehmood, A., Falahati, M., Anwar Chaudhry, A., Ur Rehman, I. & Yar, M., 18/05/2020, In: International Journal of Nanomedicine. 15, p. 3511-3522 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  102. Published

    Surface-grafted remedial hydroxyapatite nanoparticles to avoid operational infections

    Zarif, F., Tabassum, S., Jamal, A., Gul, U., Gilani, M. A., Sharif, F., Zahid, S., Asif, A., Chaudhry, A. A. & Rehman, I. U., 1/04/2019, In: Monatshefte fur Chemie. 150, 4, p. 605-615 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  103. Published

    Design and comparison of LQG/LTR and H-infinity controllers for a VSTOL flight control system

    Zarei, J., Montazeri, A., Motlagh, M. R. J. & Poshtan, J., 08/2007, In: Journal of The Franklin Institute. 344, 5, p. 577-594 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  104. Published

    Magneto-optic transmittance modulation observed in a hybrid graphene-split ring resonator terahertz metasurface

    Zanotto, S., Lange, C., Maag, T., Pitanti, A., Miseikis, V., Coletti, C., Degl'Innocenti, R., Baldacci, L., Huber, R. & Tredicucci, A., 21/09/2015, In: Applied Physics Letters. 107, 12, 4 p., 121104.

    Research output: Contribution to journalJournal articlepeer-review

  105. Published

    Ultrafast optical bleaching of intersubband cavity polaritons

    Zanotto, S., Degl'Innocenti, R., Xu, J. H., Sorba, L., Tredicucci, A. & Biasiol, G., 28/11/2012, In: Physical review B. 86, 20, 4 p., 201302.

    Research output: Contribution to journalJournal articlepeer-review

  106. Published

    Analysis of line shapes and strong coupling with intersubband transitions in one-dimensional metallodielectric photonic crystal slabs

    Zanotto, S., Degl'Innocenti, R., Sorba, L., Tredicucci, A. & Biasiol, G., 11/01/2012, In: Physical review B. 85, 3, 12 p., 035307.

    Research output: Contribution to journalJournal articlepeer-review

  107. Published

    Strong coupling between intersubband transitions and surface plasmons sustained by a metallic grating

    Zanotto, S., Degl'Innocenti, R., Biasiol, G., Sorba, L. & Tredicucci, A., 2011, Quantum Electronics and Laser Science Conference, QELS 2011.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  108. Published

    Intersubband polaritons in a one-dimensional surface plasmon photonic crystal

    Zanotto, S., Biasiol, G., Degl'Innocenti, R., Sorba, L. & Tredicucci, A., 6/12/2010, In: Applied Physics Letters. 97, 23, 3 p., 231123.

    Research output: Contribution to journalJournal articlepeer-review

  109. Published

    Ultrafast optical modulation of magneto-optical terahertz effects occurring in a graphene-loaded resonant metasurface

    Zanotto, S., Lange, C., Maag, T., Pitanti, A., Miseikis, V., Coletti, C., Degl'Innocenti, R., Baldacci, L., Huber, R. & Tredicucci, A., 27/09/2016, In: Proceedings of SPIE. 9924, 6 p., 99240J.

    Research output: Contribution to journalJournal articlepeer-review

  110. Published

    Graphene-based External Optoelectronic Terahertz Modulators for High Speed Wireless Communications

    Zaman, A., Almond, N., Lu, Y., Romain, X., Alves De Lima, D., Lin, H., Burton, O., Alexander-Webber, J., Hofmann, S., Mitchell, T., Griffiths, J., Beere, H., Ritchie, D. & Degl'Innocenti, R., 25/10/2021, 2021 14th UK-Europe-China Workshop on Millimetre-Waves and Terahertz Technologies (UCMMT). IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  111. Published

    Liquid-liquid equilibria of mixtures with ethyl lactate and various hydrocarbons

    Zakrzewska, M. E., Manic, M. S., Macedo, E. A. & Najdanovic, V., 25/04/2012, In: Fluid Phase Equilibria. 320, p. 38-42 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  112. Published

    A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material

    Zakir, M., Kheraif, A. A. A. A., Asif, M., Wong, F. S. L. & Rehman, I. U., 2013, In: Dental Materials. 29, 4, p. e53-e59

    Research output: Contribution to journalJournal articlepeer-review

  113. Published

    Laser powder bed fusion of precipitation-hardened martensitic stainless steels: a review

    Zai, L., Zhang, C., Wang, Y., Guo, W., Wellmann, D., Tong, X. & Tian, Y., 14/02/2020, In: Metals. 10, 2, 25 p., 255.

    Research output: Contribution to journalJournal articlepeer-review

  114. Published

    Fabrication, in vitro and in vivo studies of bilayer composite membrane for periodontal guided tissue regeneration

    Zahid, S., Khan, A. S., Chaudhry, A. A., Ghafoor, S., Ul Ain, Q., Raza, A., Rahim, M. I., Goerke, O., Rehman, I. U. & Tufail, A., 1/02/2019, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 33, 7, p. 967-978 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  115. Published

    Biological behavior of bioactive glasses and their composites

    Zahid, S., Shah, A. T., Jamal, A., Chaudhry, A. A., Khan, A. S., Khan, A. F., Muhammad, N. & Rehman, I. U., 1/08/2016, In: RSC Advances. 6, 74, p. 70197-70214 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  116. Published

    Bi-layered α-tocopherol acetate loaded membranes for potential wound healing and skin regeneration

    Zahid, S., Khalid, H., Ikram, F., Iqbal, H., Samie, M., Shahzadi, L., Shah, A. T., Yar, M., Chaudhry, A. A., Awan, S. J., Khan, A. F. & Rehman, I. U., 1/08/2019, In: Materials Science and Engineering: C . 101, p. 438-447 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  117. Published

    Therapeutic applications of nanotechnology in dentistry: Nanostructures for Oral Medicine

    Zafar, M. S., Khurshid, Z., Najeeb, S., Zohaib, S. & Rehman, I. U., 2017, Nanostructures for Oral Medicine: Micro and nano technologies. Elsevier Inc., p. 833-862 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  118. Published

    Characterization of fast pyrolysis bio-oil from hardwood and softwood lignin

    Zadeh, Z. E., Abdulkhani, A. & Saha, B., 17/02/2020, In: Energies. 13, 4, 14 p., 887.

    Research output: Contribution to journalJournal articlepeer-review

  119. Published

    Recent Insights into Lignocellulosic Biomass Pyrolysis: A Critical Review on Pretreatment, Characterization, and Products Upgrading

    Zadeh, Z. E., Abdulkhani, A., Aboelazayem, O. & Saha, B., 8/07/2020, In: Processes. 8, 7, 31 p., 799.

    Research output: Contribution to journalJournal articlepeer-review

  120. Published

    Recent developments in the energy harvesting systems from road infrastructures

    Zabihi, N. & Saafi, M., 20/08/2020, In: Sustainability. 12, 17, 27 p., 6738.

    Research output: Contribution to journalJournal articlepeer-review

  121. Published

    A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings

    Yuan, W., Li, R., Chen, Z., Gu, J. & Tian, Y., 15/01/2021, In: Surface and Coatings Technology. 405, 13 p., 126582.

    Research output: Contribution to journalJournal articlepeer-review

  122. Published

    Development of sensor arrays for electromagnetic tomography: compensation of large background signal values.

    Yu, Z. Z. & Peyton, A. J., 1998, In: Transactions of the Institute of Measurement and Control. 20, 4, p. 195-202 8 p.

    Research output: Contribution to journalJournal article

  123. Published

    Electromagnetic inductance tomography (EMT): sensor, electronics and image reconstruction for a system with a rotatable parallel excitation.

    Yu, Z. Z., Peyton, A. J., Xu, L. A. & Beck, M. S., 1998, In: IEE Proceedings Science Measurement and Technology. 145, 1, p. 20-25 6 p.

    Research output: Contribution to journalJournal article

  124. Published

    Development of sensor arrays for electromagnetic tomography.

    Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  125. Published

    Fire responses and resistance of concrete-filled steel tubular frame structures

    Yu, M., Zha, X., Ye, J. & Li, Y., 06/2010, In: International Journal of Structural Stability and Dynamics. 10, 2, p. 253-271 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  126. Published

    A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & She, C., 04/2010, In: Engineering Structures. 32, 4, p. 1046-1053 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  127. Published

    The influence of joints and composite floor slabs on effective tying of steel structures in preventing progressive collapse

    Yu, M., Zha, X. & Ye, J., 03/2010, In: Journal of Constructional Steel Research. 66, 3, p. 442-451 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  128. Published

    A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & Li, Y., 04/2013, In: Engineering Structures. 49, p. 1-10 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  129. Published

    A unified method for calculating fire resistance of solid and hollow concrete-filled steel tube columns based on average temperature

    Yu, M., Zha, X., Ye, J. & Wang, B., 15/07/2014, In: Engineering Structures. 71, p. 12-22 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  130. Published

    The effect of random porosity field on supercritical carbonation of cement-based materials

    Yu, M., Bao, H., Ye, J. & Chi, Y., 15/08/2017, In: Construction and Building Materials. 146, p. 144-155 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  131. Published

    A unified formula for calculating bending capacity of solid and hollow concrete-filled steel tubes under normal and elevated temperature

    Yu, M., Pei, X., Xu, L. & Ye, J., 02/2018, In: Journal of Constructional Steel Research. 141, p. 216-225 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  132. Published

    A unified interaction equation for strength and global stability of solid and hollow concrete-filled steel tube columns under room and elevated temperatures

    Yu, M., Xu, H., Ye, J. & Chi, Y., 1/09/2018, In: Journal of Constructional Steel Research. 148, p. 304-313 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  133. Published

    Fire resistance of concrete-filled steel tube columns with preload. Part I: Experimental investigation

    Yu, M., Wang, T., Huang, W., Yuan, H. & Ye, J., 1/09/2019, In: Composite Structures. 223, 110994.

    Research output: Contribution to journalJournal articlepeer-review

  134. Published

    Fire resistance of concrete-filled steel tube columns with preload: Part II: Numerical and analytical investigation

    Yu, M., Wang, T., Huang, W. & Ye, J., 1/09/2019, In: Composite Structures. 223, 110995.

    Research output: Contribution to journalJournal articlepeer-review

  135. Published

    A unified method for calculating the fire resistance of concrete-filled steel tube with fire protection under combined loading

    Yu, M., Hu, X., Chi, Y. & Ye, J., 31/05/2020, In: Journal of Constructional Steel Research. 168, 17 p., 106003.

    Research output: Contribution to journalJournal articlepeer-review

  136. Published

    Experimental study and DEM modelling of bolted composite lap joints subjected to tension

    Yu, M., Yang, B., Chi, Y., Xie, J. & Ye, J., 1/06/2020, In: Composites Part B: Engineering. 190, 14 p., 107951.

    Research output: Contribution to journalJournal articlepeer-review

  137. Published

    The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 1/06/2020, In: Composite Structures. 241, 10 p., 112136.

    Research output: Contribution to journalJournal articlepeer-review

  138. Published

    Fracture mechanisms of hybrid adhesive bonded joints: effects of the stiffness of constituents

    Yousefi Kanani, A., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 1/10/2020, In: International Journal of Adhesion and Adhesives . 102, 102649.

    Research output: Contribution to journalJournal articlepeer-review

  139. Published

    A novel dissimilar single-lap joint with interfacial stiffness improvement

    Yousefi Kanani, A., Hou, X. & Ye, J., 15/11/2020, In: Composite Structures. 252, 11 p., 112741.

    Research output: Contribution to journalJournal articlepeer-review

  140. Published

    The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 1/01/2021, In: Engineering Structures. 11 p., 111322.

    Research output: Contribution to journalJournal articlepeer-review

  141. Published

    Hybrid and adhesively bonded joints with dissimilar adherends: a critical review

    Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.

    Research output: Contribution to journalReview articlepeer-review

  142. Published

    A novel configuration of a double lap adhesive joint with reduced stress concentrations

    Yousefi Kanani, A., Hou, X. & Ye, J., 7/09/2017, 20th International Conference on Composite Structures - ICCS 20. Tornabene, F. (ed.). Bologna, Italy: Societa Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  143. Published

    Development of Novel Multi-Material Adhesive Joints

    Yousefi Kanani, A., 1/03/2021, Lancaster University. 190 p.

    Research output: ThesisDoctoral Thesis

  144. Published

    Digital discrimination of neutrons and gamma-rays in liquid scintillators using wavelets

    Yousefi, S., Lucchese, L. & Aspinall, M. D., 11/01/2009, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 598, 2, p. 551-555 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  145. Published

    A novel wavelet-based method for neutron/gamma discrimination in liquid scintillators

    Yousefi, S., Lucchese, L. & Aspinall, M. D., 2008, IEEE Nuclear Science Symposium Conference Record. IEEE, p. 2387-2391 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  146. Published

    The Captain Toolbox

    Young, P. C., Taylor, C. J., Tych, W., Pedregal, D. J. & McKenna, P. G., 2010

    Research output: Exhibits, objects and web-based outputsSoftware

  147. Published

    The Captain Toolbox for Matlab

    Young, P., Tych, W. & Taylor, J., 2009, p. 758-763. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  148. Published

    Recent developments in the CAPTAIN Toolbox for Matlab

    Young, P. & Taylor, C. J., 2012, 16th IFAC Symposium on System Identification . Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  149. Published

    Resolving the internal and basal geometry of ice masses using imaging phase-sensitive radar

    Young, T. J., Schroeder, D. M., Christoffersen, P., Lok, L. B., Nicholls, K. W., Brennan, P. V., Doyle, S. H., Hubbard, B. & Hubbard, A., 1/08/2018, In: Journal of Glaciology. 64, 246, p. 649-660 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  150. Published

    Physical conditions of fast glacier flow: 3. Seasonally-evolving ice deformation on Store Glacier, West Greenland

    Young, T. J., Christoffersen, P., Doyle, S. H., Nicholls, K. W., Stewart, C. L., Hubbard, B., Hubbard, A., Lok, L. B., Brennan, P., Benn, D. I., Luckman, A. & Bougamont, M., 30/01/2019, In: Journal of Geophysical Research: Earth Surface. 124, p. 245-267 23 p.

    Research output: Contribution to journalJournal articlepeer-review

  151. Published

    In situ reaction kinetic analysis of dental restorative materials

    Younas, B., Khan, A. S., Muzaffar, D., Hussain, I., Chaudhry, A. A. & Rehman, I. U., 1/12/2013, In: Applied Physics B. 64, 3, 10 p., 30701.

    Research output: Contribution to journalJournal articlepeer-review

  152. Published

    Raman spectroscopy detects melanoma and the tissue surrounding melanoma using tissue-engineered melanoma models

    Yorucu, C., Lau, K., Mittar, S., Green, N. H., Raza, A., Rehman, I. U. & MacNeil, S., 1/05/2016, In: APPLIED SPECTROSCOPY REVIEWS. 51, 4, p. 263-277 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  153. Published

    Analysis of the lift-off effect of spectra for eddy current sensors.

    Yin, W., Binns, R., Davis, C. & Peyton, A. J., 2005, Proceedings of the IMTC 2005 – instrumentation and measurement technology conference. p. 1779-1784 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  154. Published

    Imaging the permeability distribution of a layered conductor using inductance spectroscopy.

    Yin, W., Dickinson, S. J. & Peyton, A. J., 2005, Proceedings of the 4th world congress on industrial process tomography. p. 720-725 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  155. Published

    A multi-frequency impedance analyser for electrical tomography systems.

    Yin, W., Dickinson, S. J. & Peyton, A. J., 2005, Proceedings of the 4th world congress on industrial process tomography. p. 30-35 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  156. Published

    Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model.

    Yin, W., Peyton, A. J. & Dickinson, S. J., 08/2004, In: IEEE Transactions on Instrumentation and Measurement. 53, 4, p. 1335-1338 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  157. Published

    The use of inductance spectroscopy to image the conductivity distribution of a layered conductor.

    Yin, W., Dickinson, S. J. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 472-478 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  158. Published

    Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model.

    Yin, W., Peyton, A. J. & Dickinson, S. J., 2003, Proceedings of the 20th IEEE instrumentation and measurement technology conference. IEEE, Vol. 1. p. 162-165 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  159. Published

    Linear EMT for the detection of faults in metallic planar structures (DIF).

    Yin, W., Ma, X., Zysko, G. & Peyton, A. J., 09/2007. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  160. Published

    Pneumatic Suspension Damping Characterisation with Equivalent Damping Ratio

    Yin, Z., Cao, D., Khajepour, A., Ebrahimi, B. & Guo, K., 2012, In: International Journal of Heavy Vehicle Systems. 19, 3, p. 314-332 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  161. Published

    Experimental and analytical property characterization of a self-damped pneumatic suspension system

    Yin, Z., Khajepour, A., Cao, D., Ebrahimi, B. & Guo, K., 2010, p. SAE 2010-01-1894.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  162. Published

    A new pneumatic suspension system with independent stiffness and ride height tuning capabilities

    Yin, Z., Khajepour, A., Cao, D., Ebrahimi, B. & Guo, K., 2012, In: Vehicle System Dynamics. 50, 12, p. 1735-1746 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  163. Published

    Initiation and propagation of transverse cracking in composite laminates

    Ye, J., Lam, D. & Zhang, D., 02/2010, In: Computational Materials Science. 47, 4, p. 1031-1039 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  164. Published

    An investigation on the stress transfer in concrete beams bonded with FRP plates

    Ye, J. Q. & Yang, J., 2005, Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005. Chen, JF. & Teng, JG. (eds.). HONG KONG: IIFC SECRETARIAT, p. 183-188 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  165. Published

    A state space finite element for laminated composites with free edges and subjected to transverse and in-plane loads

    Ye, J. Q., Sheng, H. Y. & Qin, Q. H., 06/2004, In: Computers and Structures. 82, 15-16, p. 1131-1141 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  166. Published

    Free-edge effect in cross-ply laminated hollow cylinders subjected to axisymmetric transverse loads

    Ye, J. Q. & Sheng, H. Y., 08/2003, In: International Journal of Mechanical Sciences. 45, 8, p. 1309-1326 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  167. Published

    Interfacial shear transfer of RC beams strengthened by bonded composite plates

    Ye, J. Q., 2001, In: Cement and Concrete Composites. 23, 4-5, p. 411-417 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  168. Published

    Edge effects in angle-ply laminated hollow cylinders

    Ye, J. Q., 05/2001, In: Composite Structures. 52, 2, p. 247-253 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  169. Published

    Edge effects in cross-ply laminated hollow cylindrical shells

    Ye, J. Q., 2000, Computational techniques for materials, composites and composite structures. Topping, BHV. (ed.). Edinburgh: Civil-Comp press, p. 359-363 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  170. Published

    Decay rate of edge effects in cross-ply-laminated hollow cylinders

    Ye, J. Q., 02/2001, In: International Journal of Mechanical Sciences. 43, 2, p. 455-470 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  171. Published

    Micro-mechanical analysis of splitting failure in concrete reinforced with fiber reinforced plastic rods

    Ye, J. Q. & Wu, Z. J., 08/2000, In: Cement and Concrete Composites. 22, 4, p. 243-251 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  172. Published

    Closure to “Buckling Analysis of Angle‐Ply Multilaminated Long Hollow Cylinders”

    Ye, J. Q., 08/2000, In: Journal of Engineering Mechanics. 126, 8, p. 887-887 1 p.

    Research output: Contribution to journalEditorialpeer-review

  173. Published

    Buckling analysis of angle-ply multilaminated long hollow cylinders

    Ye, J. Q., 08/1999, In: Journal of Engineering Mechanics. 125, 8, p. 964-969 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  174. Published

    Error bounds on the eigenvalues of a linearized dynamic stiffness matrix

    Ye, J. Q., 04/1998, In: Communications in Numerical Methods in Engineering. 14, 4, p. 305-312 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  175. Published

    Axisymmetric vibration analysis of laminated hollow cylinders with ring stiffeners

    Ye, J. Q., 1997, In: Composite Structures. 38, 1-4, p. 151-156 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  176. Published

    Axisymmetric vibration of laminated annular plates composed of transversely isotropic layers

    Ye, J. Q., 14/08/1997, In: Journal of Sound and Vibration. 205, 2, p. 250-256 7 p.

    Research output: Contribution to journalLetterpeer-review

  177. Published

    Three-dimensional vibrations of cross-ply laminated hollow cylinders with clamped edge boundaries

    Ye, J. Q. & Soldatos, K. P., 07/1997, In: Journal of Vibration and Acoustics. 119, 3, p. 317-323 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  178. Published

    Quadratic representation of a nonlinear dynamic stiffness matrix and related eigenvalue problems

    Ye, J. Q. & Williams, F. W., 15/07/1997, In: Computer Methods in Applied Mechanics and Engineering. 146, 3-4, p. 313-323 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  179. Published

    A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges

    Ye, J. Q., 30/01/1997, In: Computer Methods in Applied Mechanics and Engineering. 140, 3-4, p. 383-392 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  180. Published

    Three-dimensional vibration of laminated composite plates and cylindrical panels with arbitrarily located lateral surfaces point supports

    Ye, J. Q. & Soldatos, K. P., 03/1996, In: International Journal of Mechanical Sciences. 38, 3, p. 271-281 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  181. Published

    Bounding properties for eigenvalues of a transcendental dynamic stiffness matrix by using a quadratic matrix pencil

    Ye, J. & Williams, F. W., 6/07/1995, In: Journal of Sound and Vibration. 184, 1, p. 173-183 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  182. Published

    Three-dimensional buckling analysis of laminated composite hollow cylinders and cylindrical panels

    Ye, J. & Soldatos, K. P., 07/1995, In: International Journal of Solids and Structures. 32, 13, p. 1949-1962 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  183. Published

    Bounding Properties For Eigenvalues Of A Transcendental Constrained Matrix By Using A Simple Matrix Pencil

    Ye, J. & Williams, F. W., 20/10/1994, In: Journal of Sound and Vibration. 177, 2, p. 282-287 6 p.

    Research output: Contribution to journalLetterpeer-review

  184. Published

    Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels

    Ye, J. & Soldatos, K. P., 08/1994, In: Computer Methods in Applied Mechanics and Engineering. 117, 3-4, p. 331-351 21 p.

    Research output: Contribution to journalJournal articlepeer-review

  185. Published

    An alternative approach for large deflection analysis of axisymmetric plates on elastic foundation

    Ye, J., 08/1994, In: Communications in Numerical Methods in Engineering. 10, 8, p. 623-632 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  186. Published

    Three-dimensional vibration of laminated cylinders and cylindrical panels with symmetric or antisymmetric cross-ply lay-up

    Ye, J. & Soldatos, K. P., 1994, In: Composites Part B: Engineering. 4, 4, p. 429-444 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  187. Published

    Large Deflection of Imperfect Plates by Iterative BE‐FE Method

    Ye, J., 03/1994, In: Journal of Engineering Mechanics. 120, 3, p. 431-444 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  188. Published

    Postbuckling Analysis of Plates Under Combined Loads by a Mixed Finite Element and Boundary Element Method

    Ye, J., 08/1993, In: Journal of Pressure Vessel Technology. 115, 3, p. 262-267 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  189. Published

    Axisymmetric nonlinear analysis of shallow spherical shells by a combined boundary element and finite difference method

    Ye, J., 1992, In: Engineering Analysis with Boundary Elements. 9, 4, p. 283-287 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  190. Published

    Non-linear bending analysis of plates and shells by using a mixed spline boundary element and finite element method

    Ye, J., 20/05/1991, In: International Journal for Numerical Methods in Engineering. 31, 7, p. 1283-1294 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  191. Published

    Large deflection analysis of axisymmetric circular plates with variable thickness by the boundary element method

    Ye, J., 06/1991, In: Applied Mathematical Modelling. 15, 6, p. 325-328 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  192. Published

    Thin plates of variable thickness with linear flexural rigidity

    Ye, J. & Xiao, H., 04/1989, In: Communications in Applied Numerical Methods. 5, 3, p. 153-158 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  193. Published

    A new approach for the bending problem of shallow shell by the boundary element method

    Ye, J., 10/1988, In: Applied Mathematical Modelling. 12, 5, p. 467-470 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  194. Published

    Laminated composite plates and shells: 3D modelling

    Ye, J., 2003, London: Springer-Verlag. 273 p.

    Research output: Book/Report/ProceedingsMonograph

  195. Published

    Structural and Stress Analysis: theories, Tutorial and Examples

    Ye, J., 2008, UK: Spon Press (Taylor and Francis). 217 p.

    Research output: Book/Report/ProceedingsBook

  196. Published

    Initiation and propagation of transverse cracking in composite laminates

    Ye, J. & Zhang, D., 2008, Third International Conference on Engineering Failure Analysis, ICEFA-III, Barcelona. Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  197. Published

    Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates.

    Ye, J., 2009, Advances in Engineering Mechanics. Qin, Q. & Sun, B. (eds.). Nova Science Publishers, Vol. 1. p. 127-165 39 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  198. Published

    Analytical solutions of composite plate and shell structures and their engineering applications

    Ye, J., 1996, Advances in Applied Mechanics Research in the UK. Beijing: Science Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  199. Published

    A successive bounding method to find the exact eigenvalues of transcendental stiffness matrix formulations

    Ye, J. & Williams, F. W., 30/03/1995, In: International Journal for Numerical Methods in Engineering. 38, 6, p. 1057-1067 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  200. Published

    A unified approach for the linear and nonlinear analysis of plates and shallow shells

    Ye, J., 1993, In: Thin-Walled Structures. 17, 3, p. 223-236 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  201. Published

    Axisymmetric Buckling of Homogeneous and Laminated Circular Plates

    Ye, J., 08/1995, In: Journal of Structural Engineering. 121, 8, p. 1221-1224 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  202. Published

    Axisymmetric buckling analysis of homogeneous and laminated annular plates

    Ye, J., 1995, In: International Journal of Pressure Vessels and Piping. 62, 2, p. 153-159 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  203. Published

    Axisymmetric elastic postbuckling of circular plates

    Ye, J., 1995, In: International Journal of Pressure Vessels and Piping. 62, 3, p. 213-217 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  204. Published

    Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers

    Ye, J. & Soldatos, K. P., 1996, Proceedings of the 1996 Engineering Systems Design and Analysis Conference. Sabir, A. B. (ed.). American Society of Mechanical Engineers

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  205. Published

    Vibration of laminated composite panels with intermediate point supports and clamped edges

    Ye, J., 1997, Proceedings of the 2nd International Symposium on Structures and Foundations in Civil Engineering. Shen, C. K., Kuang, J. S. & Ng, C. W. W. (eds.). Hong Kong: Department of Civil and Structural Engineering, The Hong Kong University of Science and Technology, p. 103-108

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  206. Published

    Decay rate of boundary effects in laminated composite cylinders and cylindrical panels.

    Ye, J., 1998, Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  207. Published

    Interfacial effects On RC beams strengthened by bonded composite plates

    Ye, J., 1999, Proceedings of the Second Asia Pacific Specialty Conference on Fiber Reinforced Concrete . Lok, T. S. & Tseng, K. (eds.). Singapore

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  208. Published

    Study and applications of a Bounding Method in stability analysis of Stiffened composite aerospace panels

    Ye, J., 2001, Solids, structures and coupled problems in engineering : : proceedings of the 2nd European Conference on Computational Mechanics 26-29 June 2001, Cracow Poland. Waszczyszyn, Z. & Pamin, J. (eds.). Cracow: Cracow University of Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  209. Published

    Stress transfer in cross-ply laminates with transverse cracks

    Ye, J. & Yang, J., 2004, Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China . Yao, Z. H., Yuan, M. W. & Zhong, W. X. (eds.). Beijing: Tsinghua University Press & Springer-Verlag

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  210. Published

    Prediction of failure envelopes and stress–strain curves of fiber composite laminates under triaxial loads

    Ye, J. & Zhang, D., 09/2012, In: Journal of Composite Materials. 46, 19-20, p. 2417-2430 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  211. Published

    Subwavelength vortical plasmonic lattice solitons

    Ye, F., Mihalache, D., Hu, B. & Panoiu, N. C., 16/12/2010, In: Optics Letters. 36, 7, p. 1179-1181 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  212. Published

    Organo-erbium systems for optical amplification at telecommunications wavelengths

    Ye, H. Q., Li, Z., Peng, Y., Wang, C. C., Li, T. Y., Zheng, Y. X., Sapelkin, A., Adamopoulos, G., Hernandez, I., Wyatt, P. B. & Gillin, W. P., 04/2014, In: Nature Materials. 13, 4, p. 382-386 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  213. Published

    Energy harvesting of composite cantilever beam mounted on flexible structures to protect piezoelectric sensor and maximisation of the output power

    Ye, J. & Daraji, A. H. A., 09/2017, ICCS20 20th International Conference on Composite Structures. Ferreira, A., Larbi, W., Deu, J-F., Tornabene, F. & Fantuzzi, N. (eds.). Societa Editorice Esculapio, (Structural and Computational Mechanics Book Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNAbstract

  214. Published

    A multi-scale model for studying failure mechanisms of composite wind turbine blades

    Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In: Composite Structures. 212, p. 220-229 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  215. Published

    Failure analysis of fiber-reinforced composites subjected to coupled thermo-mechanical loading

    Ye, J., Wang, Y., Li, Z., Saafi, M., Jia, F., Huang, B. & Ye, J., 1/03/2020, In: Composite Structures. 235, 13 p., 111756.

    Research output: Contribution to journalJournal articlepeer-review

  216. Published

    Microscale intrinsic properties of hybrid unidirectional/woven composite laminates: Part I experimental tests

    Ye, J., Cai, H., Liu, L., Zhai, Z., Amaechi, C. V., Wang, Y., Wan, L., Yang, D., Chen, X. & Ye, J., 15/04/2021, In: Composite Structures. 262, 11 p., 113369.

    Research output: Contribution to journalJournal articlepeer-review

  217. Published

    Microscale damage evolutions in fiber-reinforced composites with different initial defects

    Ye, J., Hong, Y., Liu, L., Cai, H., He, W., Huang, B., Saafi, M., Wang, Y. & Ye, J., 1/01/2022, In: Composite Structures. 279, 14 p., 114856.

    Research output: Contribution to journalJournal articlepeer-review

  218. Published

    Multimedia Communications System Operating over Low Voltage Electricity Distribution Network

    Yazdani, J., Fallows, K., Brown, P. & Honary, B., 11/1998, Proceedings of the EPSRC MNA Workshop 1998 (MNA'98), Leeds, UK, 16-17 Nov 1998. Leeds, UK

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  219. Published

    On the design and implementation of a mobile robot control system.

    Yavuz, H. & Bradshaw, A., 05/2002, In: Journal of Intelligent and Robotic Systems. 34, 1, p. 1-26 26 p.

    Research output: Contribution to journalJournal article

  220. Published

    Conceptual design and modelling of a domestic mobile robot.

    Yavuz, H. & Bradshaw, A., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 15-35 21 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  221. Published

    Conceptual design and development of a navigation system for a mobile robot.

    Yavuz, H., Chandler, A., Bradshaw, A. & Seward, D. W., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 65-85 21 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  222. Published

    Navigation system design for an individual excavator robot.

    Yavuz, H., Bradshaw, A. & Dogantan, Z. S., 1997, Proceedings of Mamkon '97. Istanbul, p. 489-495 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  223. Published

    Time series analysis-based adaptive tuning techniques for a heaving wave energy converter in irregular seas.

    Yavuz, H., Stallard, T. J., McCabe, A. P. & Aggidis, G. A., 2007, In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 221, 1, p. 77-90 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  224. Published

    Diffusion and swelling measurements in pharmaceutical powder compacts using terahertz pulsed imaging

    Yassin, S., Su, K., Lin, H., Gladden, L. F. & Zeitler, J. A., 05/2015, In: Journal of Pharmaceutical Sciences. 104, 5, p. 1658-1667 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  225. Published

    Aqueous diffusion in porous polymer powder compacts studied by terahertz pulsed imaging

    Yassin, S., Lin, H., Gladden, L. F. & Zeitler, J. A., 2013, Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), 2013 38th International Conference on. IEEE, 2 p. 6665798

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  226. Published

    Deoxy-sugar releasing biodegradable hydrogels promote angiogenesis and stimulate wound healing

    Yar, M., Shahzadi, L., Mehmood, A., Raheem, M. I., Roman, S., Chaudhry, A. A., Rehman, I. U., Douglas, C. W. I. & MacNeil, S., 1/12/2017, In: MATERIALS TODAY COMMUNICATIONS. 13, p. 295-305 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  227. Published

    Heparin binding chitosan derivatives for production of pro-angiogenic hydrogels for promoting tissue healing

    Yar, M., Shahzad, S., Shahzadi, L., Shahzad, S. A., Mahmood, N., Chaudhry, A. A., Rehman, I. U. & MacNeil, S., 1/05/2017, In: Materials Science and Engineering: C . 74, p. 347-356 10 p.

    Research output: Contribution to journalReview articlepeer-review

  228. Published

    Novel meloxicam releasing electrospun polymer/ceramic reinforced biodegradable membranes for periodontal regeneration applications

    Yar, M., Farooq, A., Shahzadi, L., Khan, A. S., Mahmood, N., Rauf, A., Chaudhry, A. A. & Rehman, I. U., 1/07/2016, In: Materials Science and Engineering: A. 64, p. 148-156 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  229. Published

    Production of chitosan PVA PCL hydrogels to bind heparin and induce angiogenesis

    Yar, M., Gigliobianco, G., Shahzadi, L., Dew, L., Siddiqi, S. A., Khan, A. F., Chaudhry, A. A., Rehman, I. U. & MacNeil, S., 1/09/2016, In: International Journal of Polymeric Materials and Polymeric Biomaterials. 65, 9, p. 466-476 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  230. Published

    Triethyl orthoformate mediated a novel crosslinking method for the preparation of hydrogels for tissue engineering applications: Characterization and in vitro cytocompatibility analysis

    Yar, M., Shahzad, S., Siddiqi, S. A., Mahmood, N., Rauf, A., Anwar, M. S., Chaudhry, A. A. & Rehman, I. U., 1/11/2015, In: Materials Science and Engineering: A. 56, p. 154-164 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  231. Published

    Dynamic simulation of crack initiation and propagation in cross-ply laminates by DEM

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 28/07/2011, In: Composites Science and Technology. 71, 11, p. 1410-1418 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  232. Published

    Modeling progressive delamination of laminated composites by discrete element method

    Yang, D., Ye, J., Tan, Y. & Sheng, Y., 01/2011, In: Computational Materials Science. 50, 3, p. 858-864 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  233. Published

    Discrete element modeling of the microbond test of fiber reinforced composite

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 08/2010, In: Computational Materials Science. 49, 2, p. 253-259 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  234. Published

    An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach

    Yang, J. & Ye, J., 01/2010, In: International Journal of Mechanical Sciences. 52, 1, p. 13-30 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  235. Published

    Stress analysis of cross-ply composite laminates with transverse cracks

    Yang, J., Ye, J. & Bao, Y., 12/2008, In: Mechanics of Composite Materials. 44, 6, p. 557-580 24 p.

    Research output: Contribution to journalJournal articlepeer-review

  236. Published

    Simplified solutions for the stress transfer in concrete beams bonded with FRP plates

    Yang, J., Ye, J. & Niu, Z., 02/2008, In: Engineering Structures. 30, 2, p. 533-545 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  237. Published

    Interfacial shear stress in FRP-plated RC beams under symmetric loads

    Yang, J., Ye, J. & Niu, Z., 05/2007, In: Cement and Concrete Composites. 29, 5, p. 421-432 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  238. Published

    Interfacial stresses in plated beams with cracks

    Yang, J. & Ye, J. Q., 2002, In: Composite Structures. 57, 1-4, p. 125-134 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  239. Published

    Dynamic elastic local buckling of piles under impact loads

    Yang, J. & Ye, J. Q., 05/2002, In: Structural Engineering and Mechanics. 13, 5, p. 543-556 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  240. Published

    Discrete Element Method Simulation of the Damage Evolution in Cross-Ply Laminate under Tensile Loading

    Yang, D., Ye, J., Tan, Y. Q. & Sheng, Y., 2010, The Tenth International Conference on Computational Structures Technology. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). Stirling: Civil-Comp press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  241. Published

    Closed-form rigorous solution for the interfacial stress in plated beams using a two-stage method.

    Yang, J. & Ye, J., 2005, Bond behaviour of FRP in structures : : proceedings of the International Symposium on Bond Behaviour of FRP in Structures, 7-9 December 2005, Hong Kong, China. Chen, J. F. & Teng, J. G. (eds.). International Institute for FRP in Construction

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  242. Published

    Multi-scale modelling of damage progression in FRC laminates - Applications of DEM

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 2011, Particle-Based Methods II: Fundamentals and Applications. Onate, E. & Owen, D. R. J. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 256-263 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  243. Published

    Three-Dimensional Discrete Element Modeling of the Damage Behaviour of Cross-Ply Laminate under Low-Velocity Impact

    Yang, D., Tan, Y. Q., Ye, J. & Sheng, Y., 2009, In: Civil-Comp Proceedings. 91, Paper 191.

    Research output: Contribution to journalJournal articlepeer-review

  244. Published

    Numerical Modelling of Damage Progression in Single-fiber Composite under Axial Tension

    Yang, D., Sheng, Y., Ye, J., Tan, Y. & Jiang, S., 2011, In: Advanced Materials Research. 268-270, p. 280-285 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  245. Published

    Multi-scale modeling of the progressive damage in cross-ply laminates under thermal and mechanical loading

    Yang, D., Sheng, Y. & Ye, J., 2012, In: IOP Conference Series: Materials Science and Engineering. 40, 1

    Research output: Contribution to journalJournal articlepeer-review

  246. Published

    Design, Optimization and Numerical Modelling of A Novel Floating Pendulum Wave Energy Converter with Tide Adaptation

    Yang, J., Zhang, D., Chen, Y., Liang, H., Tan, M., Li, W. & Ma, X., 10/2017, In: China Ocean Engineering. 31, 5, p. 578–588 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  247. Published

    A numerical study of the elastic behaviors of carbon-epoxy lamina under uni-axial compression using the discrete element method

    Yang, D. M., Tan, Y. Q., Ye, J. Q. & Sheng, Y., 1/01/2008, Proceedings of the 9th International Conference on Computational Structures Technology, CST 2008. Topping, B. H. V. & Papadrakakis, M. (eds.). Civil-Comp press, Vol. 88. 18

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  248. Published

    A layer-wise fourier expansion approach for stress transfer in cross-ply laminates with transverse matrix cracks

    Yang, J. & Ye, J., 1/12/2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16: "A Giant Step Towards Environmental Awareness From Green Composites to Aerospace".

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  249. Published

    Constructing quantum dots@flake graphitic carbon nitride isotype heterojunctions for enhanced visible-light-driven NADH regeneration and enzymatic hydrogenation

    Yang, D., Zou, H., Wu, Y., Shi, J., Zhang, S., Wang, X., Han, P., Tong, Z. & Jiang, Z., 31/05/2017, In: Industrial and Engineering Chemistry Research. 56, 21, p. 6247-6255 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  250. Published

    Coordination between electron transfer and molecule diffusion through a bioinspired amorphous titania nanoshell for photocatalytic nicotinamide cofactor regeneration

    Yang, D., Zhang, Y., Zhang, S., Cheng, Y., Wu, Y., Cai, Z., Wang, X., Shi, J. & Jiang, Z., 6/12/2019, In: ACS Catalysis. 9, 12, p. 11492-11501 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  251. Published

    Microstructure and properties of FeCoCrNiMoSix high-entropy alloys fabricated by spark plasma sintering

    Yang, Y., Ren, Y., Tian, Y., Li, K., Zhang, W., Shan, Q., Huang, Q. & Wu, H., 5/12/2021, In: Journal of Alloys and Compounds. 884, 9 p., 161070.

    Research output: Contribution to journalJournal articlepeer-review

  252. Published

    Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions

    Yang, J., Wang, Y., Wang, X. E., Hou, X., Zhao, C. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, B, 13 p., 125595.

    Research output: Contribution to journalJournal articlepeer-review

  253. E-pub ahead of print

    Microstructure and tribological behaviors of FeCoCrNiMoSix high-entropy alloy coatings prepared by laser cladding

    Yang, Y., Ren, Y., Tian, Y., Li, K., Bai, L., Huang, Q., Shan, Q., Tian, Y. & Wu, H., 25/02/2022, In: Surface and Coatings Technology. 432, 9 p., 128009.

    Research output: Contribution to journalJournal articlepeer-review

  254. Published

    The influence of flow confinement on the rheological properties of complex fluids

    Yan, Y., Zhang, Z., Cheneler, D., Stokes, J. R. & Adams, M. J., 1/03/2010, In: Rheologica Acta. 49, 3, p. 255-266 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  255. Published
  256. Published

    Activation in injection area of J-PARC 3-GeV rapid cycling synchrotron and its countermeasures

    Yamamoto, K., Yamakawa, E., Takayanagi, T., Miki, N., Kamiya, J., Saha, P. K., Yoshimoto, M., Yanagibashi, T., Horino, K., Nakanoya, T. & Takeda, O., 26/08/2018, Radiation Protection and Shielding Division 20th Topical Meeting. American Nuclear Society

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  257. Published

    Luminosity reduction caused by phase modulations at the HL-LHC crab cavities

    Yamakawa, E., Apsimon, R. J., Baudrenghien, P., Calaga, R. & Dexter, A. C., 11/11/2018, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 908, p. 338-346 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  258. Published

    Luminosity Reduction Caused by the Full-Detuning LLRF Scheme on the HL-LHC Crab Cavities

    Yamakawa, E., Apsimon, R., Dexter, A., Baudrenghien, P., Calaga, R., Galindo Guarch & Galindo Guarch, F. J., 1/06/2018, IPAC 2018 Proceedings of the 9th International Particle Accelerator Conference. JACoW, 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  259. Published

    Modeling of a jig sampling and its application in disc cutter tools

    Yahaya, S. H., Sihombing, H., Yaakob, M. Y. & Hasib, H., 2012, In: Journal of Mechanical and Civil Engineering . 3, 2, p. 20-23 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  260. Published

    Hierarchical titania nanostructures prepared with focused ion beam-assisted anodisation of titanium in an aqueous electrolyte

    Yadav, P. K., Lemoine, P., Dale, G., Hamilton, J. W. J., Dunlop, P. S. M., Byrne, J. A., Mailley, P. & Boxall, C., 04/2015, In: Applied Physics A. 119, 1, p. 107-113 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  261. Published

    Experimental Study on the Thermal-Mechanical Properties and Degradation of Sleeve Grouting Material at Elevated Temperatures

    Xue, C., Su, C., Yu, M., Xu, H. & Ye, J., 1/02/2021, In: Journal of Materials in Civil Engineering. 33, 2, 3493.

    Research output: Contribution to journalJournal articlepeer-review

  262. Published

    Experimental study on thermal performance of ultra-high performance concrete with coarse aggregates at high temperature

    Xue, C., Yu, M., Xu, H., Xu, L., Saafi, M. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, Part A, 12 p., 125585.

    Research output: Contribution to journalJournal articlepeer-review

  263. Published

    Acoustic system for online wiring test on aircraft.

    Xu, Z., Koltsov, D., Richardson, A. & Sutherland, A., 18/06/2008, IEEE 14th International Mixed-Signals, Sensors, and Systems Test Workshop, 2008. IMS3TW 2008.. IEEE, p. 1-4 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  264. Published

    Design and simulation of a multi-function MEMS sensor for health and usage monitoring.

    Xu, Z., Kotsov, D., Richardson, A., Li, L. & Begbie, M., 12/01/2010, In: Proceedings of IEEE Prognostics & System Health Management Conference. p. 1-7 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  265. Published

    Embedded Health Monitoring Strategies for Aircraft Wiring Systems

    Xu, Z., Saha, S., Koltsov, D., Richardson, A., Honary, B., Hannu, J., Sutherland, A., Moffat, B. G. & Desmulliez, M. P. Y., 2008, ESTC 2008: 2ND ELECTRONICS SYSTEM-INTEGRATION TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS. NEW YORK: IEEE, p. 463-469 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  266. Published

    A multi-mode MEMS sensor design to support system test and health & usage monitoring applications

    Xu, Z., Richardson, A., Koltsov, D., Li, L., Begbie, M. & Wang, C., 1/05/2010, Test Symposium (ETS), 2010 15th IEEE European. p. 263 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  267. Published

    Move from Online Test to Fault-tolerant: Design and Simulation of a Multi-Functional MEMS Sensor

    Xu, Z., Richardson, A., Begbie, M. & Wang, C., 16/05/2011, Proceedings of the IEEE International Mixed Signals, Sensors and Systems Test Workshop. USA: IEEE COMPUTER SOC, p. 88-95 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  268. Published

    A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera-Díaz-Del-Castillo, P. E. J., Yan, W., Yang, K., San Martín, D., Kestens, L. A. I. & Van Der Zwaag, S., 06/2010, In: Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  269. Published

    Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by Ni3Ti intermetallic nanoprecipitates

    Xu, W., Rivera-Díaz-del-Castillo, P. E. J., Wang, W., Yang, K., Bliznuk, V., Kestens, L. A. I. & van der Zwaag, S., 06/2010, In: Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  270. Published

    Computational design of UHS maraging stainless steels incorporating composition as well as austenitisation and ageing temperatures as optimisation parameters

    Xu, W., Rivera-Diaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 07/2009, In: Philosophical Magazine. 89, 20, p. 1647-1661 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  271. Published

    The composition and temperature effects on the ultra high strength stainless steel design

    Xu, W., Castillo, P. E. J. R. D. D. & Zwaag, S. V. D., 20/03/2009, In: International Journal of Modern Physics B. 23, 6-7, p. 1060-1065 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  272. Published

    A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Castillo, P. E. J. R. D. D. & Zwaag, S. V. D., 04/2009, In: Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  273. Published

    Modelling Chi-phase precipitation in high molybdenum stainless steels

    Xu, W., San Martin, D., Rivera Diaz Del Castillo, P. E. J. & Van Der Zwaag, S., 2007, In: Advanced Materials Research. 15-17, p. 531-536 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  274. Published

    Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

    Xu, W., San Martin, D., Rivera Díaz del Castillo, P. E. J. & van der Zwaag, S., 15/10/2007, In: Materials Science and Engineering: A. 467, 1-2, p. 24-32 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  275. Published

    Ferrite/pearlite band prevention in dual phase and TRIP steels: Model development

    Xu, W., Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 2005, In: ISIJ International. 45, 3, p. 380-387 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  276. Published

    Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics

    Xu, W., Rivera-Díaz-del-Castillo, P. E. J. & van der Zwaag, S., 12/2008, In: Computational Materials Science. 44, 2, p. 678-689 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  277. Published

    Genetic alloy design based on thermodynamics and kinetics

    Xu, W., Rivera-Diaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 04/2008, In: Philosophical Magazine. 88, 12, p. 1825-1833 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  278. Published

    Performance of the High-Strength Self-Stressing and Self-Compacting Concrete-Filled Steel Tube Columns Subjected to the Uniaxial Compression

    Xu, L., Zhou, P., Chi, Y., Huang, L., Ye, J. & Yu, M., 09/2018, In: International journal of civil engineering. 16, 9A, p. 1069-1083 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  279. Published

    Experimental Study on Seismic Behavior of Cluster-Reinforced Precast Concrete Columns with Grouting-Anchor Connections

    Xu, L. H., Wang, Q. L., Yu, M., Chi, Y., Yang, B., Liu, M. & Ye, J. Q., 1/08/2019, In: Journal of Earthquake and Tsunami. 13, 03n04, 1940007.

    Research output: Contribution to journalJournal articlepeer-review

  280. Published

    Experimental study on fire resistance of precast concrete columns with efficient reinforcement

    Xu, H., Yu, M., Xue, C., Xu, L. & Ye, J., 1/02/2020, In: Engineering Structures. 204, 14 p., 109947.

    Research output: Contribution to journalJournal articlepeer-review

  281. Published

    Computational design of UHS stainless steel strengthened by multi-species nanoprecipitates combining genetic algorithms and thermokinetics

    Xu, W., Del Castillo, P. E. J. R. D. & Van Der Zwaag, S., 1/12/2008, p. 1167-1181. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  282. Published

    A 0.35 THz Extended Interaction Oscillator based on Overmoded and Bi-Periodic Structure

    Xu, C., Meng, L., Paoloni, C., Qin, Y., Bin, L., Wang, B., Li, H. & Yin, Y., 30/11/2021, In: IEEE Transactions on Electron Devices. 68, 11, p. 5814-5819 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  283. Published

    Weld zone porosity elimination process of galvanized steel zero-gap lap joints in remote laser spiral welding

    Xiong, W., Zhang, P., Yu, Z., Yan, H., Wu, D., Lu, Q. & Tian, Y., 2/06/2021, In: MATERIALS RESEARCH EXPRESS. 8, 6, 16 p., 066502.

    Research output: Contribution to journalJournal articlepeer-review

  284. Published

    The identification of genes involved in the stomatal response to reduced atmospheric relative humidity.

    Xie, X. D., Wang, Y. B., Williamson, L., Holroyd, G. H., Tagliavia, C., Murchie, E., Theobald, J. C., Knight, M. R., Davies, W. J., Leyser, H. M. O. & Hetherington, A. M., 9/05/2006, In: Current Biology. 16, 9, p. 882-887 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  285. Published

    The leakage behavior of supercritical CO2 flow in an experimental pipeline system

    Xie, Q., Tu, R., Jiang, X., Li, K. & Zhou, X., 1/10/2014, In: Applied Energy. 130, p. 574-580 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  286. Published

    A water-soluble core material for manufacturing hollow composite sections

    Xiao, Z., Harper, L. T., Kennedy, A. R. & Warrior, N. A., 15/12/2017, In: Composite Structures. 182, p. 380-390 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  287. Published

    A Two-Stage Approach for the Remaining Useful Life Prediction of Bearings Using Deep Neural Networks

    Xia, M., Li, T., Shu, T., Wan, J., De Silva, C. W. & Wang, Z., 1/06/2019, In: IEEE Transactions on Industrial Informatics. 15, 6, p. 3703-3711 9 p., 8454498.

    Research output: Contribution to journalJournal articlepeer-review

  288. Published

    Fault Diagnosis for Rotating Machinery Using Multiple Sensors and Convolutional Neural Networks

    Xia, M., Li, T., Xu, L., Liu, L. & De Silva, C. W., 1/02/2018, In: IEEE/ASME Transactions on Mechatronics. 23, 1, p. 101-110 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  289. Published

    Remaining useful life prediction of rotating machinery using hierarchical deep neural network

    Xia, M., Li, T., Liu, L., Xu, L., Gao, S. & De Silva, C. W., 27/11/2017, 2017 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2017. Institute of Electrical and Electronics Engineers Inc., p. 2778-2783 6 p. (2017 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2017; vol. 2017-January).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  290. Published

    Intelligent fault diagnosis approach with unsupervised feature learning by stacked denoising autoencoder

    Xia, M., Li, T., Liu, L., Xu, L. & de Silva, C. W., 7/09/2017, In: IET Science, Measurement and Technology. 11, 6, p. 687-695 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  291. Published

    Closed-loop design evolution of engineering system using condition monitoring through internet of things and cloud computing

    Xia, M., Li, T., Zhang, Y. & De Silva, C. W., 4/06/2016, In: Computer Networks. 101, p. 5-18 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  292. Published

    A framework of design weakness detection through machine health monitoring for the evolutionary design optimization of multi-domain systems

    Xia, M. & De Silva, C. W., 15/10/2014, Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014. Institute of Electrical and Electronics Engineers Inc., p. 205-210 6 p. 6926455. (Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  293. Published

    An approach for bearing fault diagnosis based on PCA and multiple classifier fusion

    Xia, M., Kong, F. & Hu, F., 24/10/2011, Proceedings - 2011 6th IEEE Joint International Information Technology and Artificial Intelligence Conference, ITAIC 2011. IEEE, p. 321-325 5 p. 6030215. (Proceedings - 2011 6th IEEE Joint International Information Technology and Artificial Intelligence Conference, ITAIC 2011; vol. 1).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  294. Published

    Data-driven prognosis method using hybrid deep recurrent neural network

    Xia, M., Zheng, X., Imran, M. & Shoaib, M., 1/08/2020, In: Applied Soft Computing Journal. 93, 8 p., 106351.

    Research output: Contribution to journalJournal articlepeer-review

  295. Published

    A Stacked GRU-RNN-based Approach for Predicting Renewable Energy and Electricity Load for Smart Grid Operation

    Xia, M., Shao, H., Ma, X. & de Silva, C. W., 31/10/2021, In: IEEE Transactions on Industrial Informatics. 17, 10, p. 7050-7059 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  296. Published

    Intelligent fault diagnosis of machinery using digital twin-assisted deep transfer learning

    Xia, M., Shao, H., Williams, D., Lu, S., Shu, L. & de Silva, C. W., 30/11/2021, In: Reliability Engineering and System Safety. 215, 9 p., 107938.

    Research output: Contribution to journalJournal articlepeer-review

  297. Published

    Strength and fracture resistance of FRP reinforced concrete flexural members

    Wu, Z. J. & Ye, J. Q., 02/2003, In: Cement and Concrete Composites. 25, 2, p. 253-261 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  298. Published

    Interfacial effects on stress transfer in fiber-reinforced composites

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 2000, In: Mechanics of Composite Materials and Structures. 7, 4, p. 315-330 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  299. Published

    3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 05/2000, In: Journal of the Mechanics and Physics of Solids. 48, 5, p. 1037-1063 27 p.

    Research output: Contribution to journalJournal articlepeer-review

  300. Published

    Digital power system simulators applied to protective relay testing

    Wu, J., Liang, Z., Ma, X. & Wang, H., 11/1993, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 17, 11, p. 47-51 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  301. Published

    Kullback-Leibler divergence based wind turbine fault feature extraction

    Wu, Y. & Ma, X., 1/07/2019, 24th International Conference on Automation & Computing. IEEE, p. 507-512 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  302. Published

    Alarms-related wind turbine fault detection based on kernel support vector machines

    Wu, Y. & Ma, X., 1/07/2019, In: The Journal of Engineering. 2019, 18, p. 4980 – 4985 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  303. Published

    Alarms-related wind turbine fault detection based on Kernel support vector machines

    Wu, Y. & Ma, X., 27/09/2018. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  304. Published

    Effect of melting modes on microstructure and tribological properties of selective laser melted AlSi10Mg alloy

    Wu, H., Ren, Y., Ren, J., Cai, A., Song, M., Liu, Y., Wu, X., Li, Q., Huang, W., Wang, X. & Baker, I., 8/12/2020, In: Virtual and Physical Prototyping. 15, sup1, p. 570-582 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  305. Published

    Selective laser melted AlSi10Mg alloy under melting mode transition: Microstructure evolution, nanomechanical behaviors and tensile properties

    Wu, H., Ren, Y., Ren, J., Liang, L., Li, R., Fang, Q., Cai, A., Shan, Q., Tian, Y. & Baker, I., 25/08/2021, In: Journal of Alloys and Compounds. 873, 10 p., 159823.

    Research output: Contribution to journalJournal articlepeer-review

  306. E-pub ahead of print

    A hybrid LSTM-KLD approach to condition monitoring of operational wind turbines

    Wu, Y. & Ma, X., 31/01/2022, In: Renewable Energy. 181, p. 554-566 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  307. Published

    The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques

    Wrigley, S., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  308. Unpublished

    The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs

    wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  309. Published

    Space plasma exploration by active radar (SPEAR): An overview of a future radar facility

    Wright, D. M., Davies, J. A., Robinson, T. R., Chapman, P. J., Yeoman, T. K., Thomas, E. C., Lester, M., Cowley, F. C., Stocker, A. J., Horne, R. B. & Honary, F., 2000, In: Annales Geophysicae. 18, 9, p. 1248-1255 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  310. Published

    The processing and properties of syntactic Al foams containing low cost expanded glass particles

    Wright, A. & Kennedy, A. R., 11/2017, In: Advanced Engineering Materials. 19, 11, 6 p., 1600467.

    Research output: Contribution to journalJournal articlepeer-review

  311. Published

    Simulating ionising radiation in gazebo for robotic nuclear inspection challenges

    Wright, T., West, A., Licata, M., Hawes, N. & Lennox, B., 7/07/2021, In: Robotics. 10, 3

    Research output: Contribution to journalJournal articlepeer-review

  312. Published

    Sphingolipids, new players in plant signalling.

    Worrall, D., Ng, C. K-Y. & Hetherington, A. M., 07/2003, In: Trends in Plant Science. 8, 7, p. 317-320 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  313. Published

    Crosstalk in guard cell signalling.

    Worrall, D., Fletcher, S., Mills, L., McAinsh, M., Hunt, L., Gray, J. E. & Hetherington, A. M., 04/2003, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 134, Supple, p. S132

    Research output: Contribution to journalJournal articlepeer-review

  314. Published

    High power X-band RF test stand development and high power testing of the CLIC crab cavity

    Woolley, B., 2015, Lancaster University. 173 p.

    Research output: ThesisDoctoral Thesis

  315. Published

    High gradient testing of an X-band crab cavity at XBOX2

    Woolley, B., Ambattu, P. K., Apsimon, R. J., Burt, G. C., Dexter, A. C., Grudiev, A., Syratchev, I., Wegner, R. & Wuensch, W., 06/2015, Proceedings of the 6th International Particle Accelerator Conference: IPAC 2015. Henderson, S., Satogata, T. & Schaa, V. R. W. (eds.). Geneva: JACoW, p. 3242-3245 4 p. WEPHA057

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  316. Published

    High-gradient behavior of a dipole-mode rf structure

    Woolley, B., Burt, G., Dexter, A. C., Peacock, R., Millar, W. L., Catalan Lasheras, N., Degiovanni, A., Grudiev, A., McMonagle, G., Syratchev, I., Wuensch, W., Rodriguez Castro, E. & Giner Navarro, J., 17/12/2020, In: Physical Review Accelerators and Beams. 23, 12, 11 p., 122002.

    Research output: Contribution to journalJournal articlepeer-review

  317. Published

    Preliminary Results of the CASCADE Hidden Sector Photon Search

    Woollett, N., Bailey, I., Burt, G., Chattopadhyay, S., Dainton, J., Dexter, A., Goudket, P., Jenkins, M., Kalliokoski, M., Moss, A., Pattalwar, S., Thakker, T. & Williams, P., 25/09/2015, Unknown. Verlag Deutsches Elektronen-Synchrotron

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  318. Published

    Biological approaches to global environment change mitigation and remediation.

    Woodward, F. I., Bardgett, R. D., Raven, J. A. & Hetherington, A. M., 28/07/2009, In: Current Biology. 19, 14, p. R615-R623

    Research output: Contribution to journalJournal articlepeer-review

  319. Published

    Nitric acid reduction on 316L stainless steel under conditions representative of reprocessing

    Woodhouse, B., Boxall, C. & Wilbraham, R., 09/2013, In: ECS Transactions. 53, 21, p. 33-44 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  320. Published

    X-ray photoelectron spectroscopic study of impregnated La0.4Sr0.6Ti0.8Mn0.2O3±d anode material for high temperature-operating solid oxide fuel cell

    Woo, S. H., Park, D. S., Choi, W., Kang, H., Baek, S-W., Kim, H-S., Shin, T. H., Park, J-Y., Schlegl, H. & Kim, J. H., 29/02/2020, In: Solid State Ionics. 345, 8 p., 115175.

    Research output: Contribution to journalJournal articlepeer-review

  321. Published

    Microstructural and electrochemical properties of impregnated La0.4Sr0.6Ti0.8Mn0.2O3±d into a partially removed Ni SOFC anode substrate

    Woo, S. H., Baek, S-W., Park, D. S., Song, K. E., Schlegl, H., Park, J-Y. & Kim, J. H., 15/02/2021, In: Journal of Alloys and Compounds. 854

    Research output: Contribution to journalJournal articlepeer-review

  322. Published

    Solution Processed Ultra-violet Light Sensing ZnO Thin-film Transistors

    Wöbkenberg, P., Zimmerling, T., Bashir, A., Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  323. Published

    Sub-diffraction thin-film sensing with planar terahertz metamaterials

    Withayachumnankul, W., Lin, H., Serita, K., Shah, C. M., Sriram, S., Bhaskaran, M., Tonouchi, M., Fumeaux, C. & Abbott, D., 2012, In: Optics Express. 20, 3, p. 3345-3352 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  324. Published

    Uncertainty in terahertz time-domain spectroscopy measurement

    Withayachumnankul, W., Fischer, B. M., Lin, H. & Abbott, D., 2008, In: Journal of the Optical Society of America B. 25, 6, p. 1059-1072 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  325. Published

    T-ray sensing and imaging

    Withayachumnankul, W., Png, G. M., Xiaoxia, Y., Atakaramians, S., Jones, I., Lin, H., Ung, B. S. Y., Balakrishnan, J., Ng, B. W. H., Ferguson, B., Mickan, S. P., Fischer, B. M. & Abbott, D., 2007, In: Proceedings of the IEEE . 95, 8, p. 1528-1558 31 p.

    Research output: Contribution to journalJournal articlepeer-review

  326. Published

    Analysis of measurement uncertainty in THz-TDS

    Withayachumnankul, W., Lin, H., Mickan, S. P., Fischer, B. M. & Abbott, D., 2007, Proceedings of SPIE : Photonics Materials, Devices, and Applications II. Serpengüzel, A., Badenes, G. & Righini, G. (eds.). SPIE, Vol. 6593. 18 p. 659326L. (Proceedings of SPIE; vol. 6593).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  327. Published

    An intuitive visual aid to the design and analysis of controller transformations.

    Winsby, A. J., Burge, S., Grout, I. & Widden, M. B., 2003, Proceedings of the educational ECAD user group.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  328. Published

    Towards the realisation of a multi-perspective virtual design environment: the integration of design tools, methods and virtual reality.

    Winsby, A. J., Quayle, S. D. & Seward, D. W., 2003, Proceedings of the 4th national conference on rapid and virtual prototyping and applications.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  329. Published

    Torque ripple and power in a variable pitch vertical axis tidal turbine

    Winchester, J. & Quayle, S., 5/09/2011. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  330. Published

    Torque ripple and variable blade force: A comparison of Darrieus and Gorlov-type turbines for tidal stream energy conversion

    Winchester, J. & Quayle, S., 8/09/2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  331. Published

    Dead time (a ghost story).

    Wilson, S. T. & Botting, F., 2000, The limits of death : between philosophy and psychoanalysis. Morra, J., Robson, M. & Smith, M. (eds.). Manchester: Manchester University Press, p. 57-78 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  332. Published

    Evolutionary ecology of insect host-parasite interactions : an ecological immunology perspective.

    Wilson, K., 2005, Insect evolutionary ecology. Fellowes, M., Holloway, G. J. & Rolff, J. (eds.). Wallingford: CABI Publications, p. 289-341 53 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  333. Published

    Non-minimal state space polynomial form of the Kalman filter for a general noise model

    Wilson, E. D., Clairon, Q. & Taylor, C. J., 27/02/2018, In: Electronics Letters. 54, 4, p. 204-206 3 p.

    Research output: Contribution to journalLetterpeer-review

  334. Published

    Robustness evaluation and robust design for Proportional-Integral-Plus control

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 1/09/2019, In: International Journal of Control. 92, 12, p. 2939-2951 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  335. Published

    Dealing with observational data in control

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 2018, In: Annual Reviews in Control. 46, p. 94-106 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  336. Published

    Model predictive and proportional integral control of blood clotting speed using warfarin when data are missing

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 29/10/2018, 18th IEEE International Conference on Bioinformatics and Bioengineering. IEEE, p. 22-27 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  337. Published

    Stochastic non-minimal state space control with application to automated drug delivery

    Wilson, E. D., Clairon, Q. & Taylor, C. J., 29/10/2018, 2018 18th IEEE International Conference on Bioinformatics and Bioengineering. IEEE, p. 28-34 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  338. Published

    Comparison of CdZnTe neutron detector models using MCNP6 and Geant4

    Wilson, E., Anderson, M., Prendergasty, D. & Cheneler, D., 10/01/2018, In: EPJ Web of Conferences. 170, 5 p., 08008.

    Research output: Contribution to journalConference articlepeer-review

  339. Published

    A comparison of models of the isometric force of locust skeletal muscle in response to pulse train inputs

    Wilson, E. D., Rustighi, E., Newland, P. L. & Mace, B. R., 03/2012, In: Biomechanics and modeling in mechanobiology. 11, 3-4, p. 519–532 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  340. Published

    Slow motor neuron stimulation of locust skeletal muscle: model and measurement

    Wilson, E. D., Rustighi, E., Newland, P. L. & Mace, B. R., 06/2013, In: Biomechanics and modeling in mechanobiology. 12, 3, p. 581–596 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  341. Published

    Bioinspired adaptive control for artificial muscles

    Wilson, E. D., Assaf, T., Pearson, M. J., Rossiter, J. M., Anderson, S. R. & Porrill, J., 2013, p. 311-322. 12 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  342. Published

    Biohybrid control of general linear systems using the adaptive filter model of cerebellum

    Wilson, E. D., Assaf, T., Pearson, M. J., Rossiter, J., Dean, P., Anderson, S. R. & Porrill, J., 2015, In: Frontiers in neurorobotics. 9, 5, 13 p., 5.

    Research output: Contribution to journalJournal articlepeer-review

  343. Published

    Cerebellar-inspired algorithm for adaptive control of nonlinear dielectric elastomer-based artificial muscle

    Wilson, E. D., Assaf, T., Pearson, M. J., Rossiter, J., Dean, P., Anderson, S. R. & Porrill, J., 30/09/2016, In: Interface. 13, 122, 15 p., 20160547.

    Research output: Contribution to journalJournal articlepeer-review

  344. Published

    Lifetimes of the superdeformed band in 192Hg

    Willsau, P., Korichi, A., Hannachi, F., Hubel, H., Korten, W., Neffgen, M., Azaiez, F., Bourgeois, C., Duprat, J., Perrin, N., Poffé, N., Sergolle, H., Bastin, G., Deloncle, I., Gall, B., Kaci, M., Porquet, M. G., Schuck, C., Simpson, J., Duffait, R. & 19 others, Le Coz, Y., Meyer, M., Redon, N., De France, G., Smith, A. G., Beausang, C. W., Joyce, M. J., Paul, E. S., Sharpey-Schafer, J. F., Clark, R. M., Wadsworth, R., Ahmad, I., Carpenter, M. P., Henry, R. G., Janssens, R. V. F., Khoo, T. L., Lauritsen, T., Hughes, J. R. & Maier, H. J., 1994, In: Nuclear Physics, Section A. 574, 3, p. 560-574 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  345. Published

    Mechanisms of fixed contamination of commonly engineered surfaces

    Williamson, B., 2018, Lancaster University. 290 p.

    Research output: ThesisDoctoral Thesis

  346. Published

    Optimum mass design of prismatic assemblies of plates with longitudinal voids

    Williams, F. W. & Ye, J., 17/07/1992, In: Computers and Structures. 44, 3, p. 557-565 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  347. Published

    Optimum mass design of laminated plates with longitudinal mid-surface voids

    Williams, F. W. & Ye, J., 17/04/1992, In: Computers and Structures. 43, 2, p. 265-272 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  348. Published

    Reactions to other corticosteroids in patients with allergic contact-dermatitis from hydrocortisone.

    Wilkinson, S. M., Hollis, S. & Beck, M. H., 1995, In: British Journal of Dermatology. 132, 5, p. 766-771 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  349. Published

    Reactions to other corticosteroids in patients with positive patch test reactions to budesonide.

    Wilkinson, S. M., Hollis, S. & Beck, M. H., 1995, In: Journal of The American Academy of Dermatology. 33, 6, p. 963-968 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  350. Published

    Beta beams for precision measurements of neutrino oscillation parameters

    Wildner, E., Benedetto, E., Hansen, C., De Melo Mendonca, T., Stora, T., Damjanovic, S., Payet, J., Chancé, A., Zorin, V., Izotov, I., Rasin, S., Sidorov, A., Skalyga, V., De Angelis, G., Prete, G., Cinausero, M., Kravchuk, V., Gramegna, F., Marchi, T., Collazuol, G. & 25 others, Mezzetto, M., Delbar, T., Loiselet, M., Keutgen, T., Mitrofanov, S., Burt, G., Dexter, A., Lamy, T., Latrasse, L., Marie-Jeanne, M., Sortais, P., Thuillier, T., Debray, F., Trophime, C., Hass, M., Hirsh, T., Berkovits, D., Stahl, A., Vardaci, E., De Nitto, A., Brondi, A., Rana, G. L., Moro, R., De Rosa, G. D. & Palladino, V., 1/12/2012, IPAC 2012 - International Particle Accelerator Conference 2012. p. 3939-3941 3 p. (IPAC 2012 - International Particle Accelerator Conference 2012).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  351. Published

    Beta beams: An accelerator based facility to explore neutrino oscillation physics

    Wildner, E., Benedetto, E., Hansen, C., De Melo Mendonca, T., Stora, T., Payet, J., Chanće, A., Zorin, V., Izotov, I., Rasin, S., Sidorov, A., Skalyga, V., De Angelis, G., Prete, G., Cinausero, M., Kravchuk, V., Gramegna, F., Marchi, T., Collazuol, G., Mezzetto, M. & 18 others, De Rosa, G., Delbar, T., Loiselet, M., Keutgen, T., Mitrofanov, S., Burt, G., Dexter, A., Lamy, T., Latrasse, L., Marie-Jeanne, M., Sortais, P., Thuillier, T., Debray, F., Trophime, C., Hass, M., Hirsh, T., Berkovits, D. & Stahl, A., 1/12/2011, IPAC 2011 - 2nd International Particle Accelerator Conference. p. 2535-2537 3 p. (IPAC 2011 - 2nd International Particle Accelerator Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  352. Published

    Triangulating the height of cosmic noise absorption: A method for estimating the characteristic energy of precipitating electrons

    Wild, P., Honary, F., Kavanagh, A. J. & Senior, A., 21/12/2010, In: Journal of Geophysical Research. 115, A12326, p. 1-11 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  353. Published

    Surface decontamination by photocatalysis

    Wilbraham, R. J., Boxall, C. & Taylor, R. J., 2010, ASME 12th International Conference on Environmental Remediation and Radioactive Waste Management: Volume 2: Facility Decontamination and Decommissioning; Environmental Remediation; Environmental Management/Public Involvement. NEW YORK: AMER SOC MECHANICAL ENGINEERS, p. 185-193 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  354. Published

    Photocatalytically driven dissolution of macroscopic metal surfaces. Part 1: Silver

    Wilbraham, R. J., Boxall, C. & Taylor, R. J., 1/12/2012, In: Journal of Photochemistry and Photobiology A: Chemistry. 249, p. 21-28 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  355. Published

    The effect of hydrogen peroxide on uranium oxide films on 316L stainless steel

    Wilbraham, R., Boxall, C., Goddard, D. T., Taylor, R. J. & Woodbury, S. E., 09/2015, In: Journal of Nuclear Materials. 464, p. 86-96 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  356. Published

    The effect of SO3-Ph-BTBP on stainless steel corrosion in nitric acid

    Wilbraham, R. J. & Boxall, C., 12/2015, In: Nukleonika. 60, 4, p. 865-869 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  357. Published

    Photocatalytically Driven Dissolution of Macroscopic Nickel Surfaces

    Wilbraham, R. J., Boxall, C. & Taylor, R. J., 1/02/2018, In: Corrosion Science. 131, p. 137-146 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  358. Published

    Raman Studies of Advanced Gas-Cooled Reactor Simulated Spent Nuclear Fuels

    Wilbraham, R. J., Rauff-Nisthar, N., Boxall, C., Howett, E., Hambley, D., Hiezl, Z., Lee, W. & Padovani, C., 1/11/2018, In: Progress in Nuclear Science and Technology. 5, p. 213-216 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  359. Published

    Model based design optimization of micromechanical systems, based on the Cosserat theory

    Wiegand, T., Peters, D., Laur, R., Rosing, R., Richardson, A., Del Sarto, M. & Baldo, L., 2008, PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT, VOL I. Cernat, M. (ed.). NEW YORK: IEEE, p. 33-38 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  360. Published

    Analysis of PS frog pitching and surging wave-energy converter operating in regular sinusoidal waves.

    Widden, M. B., French, M. J. & Aggidis, G. A., 2005, In: Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment.

    Research output: Contribution to journalJournal article

  361. Published

    Economic low head hydro power by conversion to air pressure.

    Widden, M. B., French, M. J. & Aggidis, G. A., 05/2005, Proceedings of the world renewable energy congress.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  362. Published

    The power capture of PS frog pitching and surging point absorber wave energy converter.

    Widden, M. B., French, M. J. & Aggidis, G. A., 2005, Proceedings of the international symposium on fluid machinery for wave and tidal energy: state of the art and new developments.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  363. Published

    Economic energy from low head water by conversion to air pressure.

    Widden, M. B., French, M. J. & Aggidis, G. A., 12/2004, In: IMechE Conference Transactions. v. 6, p. 41-49 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  364. Published

    Economical conversion of low-head hydropower

    Widden, M. B. & French, M. J., 2000, Proceedings of the world renewable energy congress VI. Brighton, p. 1611-1614 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  365. Published

    Fluid mechanics.

    Widden, M. B., 1995, Foundations of engineering. Macmillan

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  366. Published

    Function-costing and function maps in conceptual design.

    Widden, M. B., Oh, V. K., Li, M., Green, I. & Chaplin, R. V., 1994, Proceedings of the 1994 Lancaster international workshop on engineering design: computer-aided conceptual design, CACD'94.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  367. Published

    Analysis of a pitching-and-surging wave-energy converter that reacts against an internal mass, when operating in regular sinusoidal waves.

    Widden, M. B., French, M. J. & Aggidis, G. A., 2008, In: Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. 222, Number, p. 153-161 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  368. Published

    Use of FDM in an undergraduate student project: design, build and test a model wind turbine

    Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  369. Published

    A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture

    Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  370. Published

    Community-University Research: A Warts and All Account

    Whittle, J., Ferrario, M. A. & Simm, W., 1/01/2020, Into the Wild: Beyond the Design Research Lab. Chamberlain, A. & Crabtree, A. (eds.). Springer International Publishing, p. 115-147 33 p. (Studies in Applied Philosophy, Epistemology and Rational Ethics ; vol. 48).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  371. Published

    Defining ‘critical speed’ in driver-vehicle systems

    West, C. & Cao, D., 10/2013, p. 4155-4160. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  372. Published

    Research and teaching using a hydraulically-actuated nuclear decommissioning robot

    West, C., Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  373. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 28/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  374. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 2016, In: IFAC-PapersOnLine. 49, 12, p. 1261-1266 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  375. Published

    A new approach to improve the parameter estimation accuracy in robotic manipulators using a multi-objective output error identification technique

    West, C., Montazeri, A., Monk, S. D., Duda, D. & Taylor, C. J., 14/12/2017, 26th IEEE International Symposium on Robot and Human Interactive Communication, Lisbon. IEEE, p. 1406-1411 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  376. Published

    State-dependent parameter model identification for inverse dead-zone control of a hydraulic manipulator

    West, C., Wilson, E. D., Clairon, Q., Monk, S. D., Montazeri, A. & Taylor, C. J., 2018, In: IFAC-PapersOnLine. 51, 15, p. 126-131 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  377. Published

    A vision-based positioning system with inverse dead-zone control for dual-hydraulic manipulators

    West, C., Monk, S. D., Montazeri, A. & Taylor, C. J., 5/09/2018, 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, p. 379-384 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  378. Published

    Development of an assisted-teleoperation system for a dual-manipulator nuclear decommissioning robot

    West, C., 2019, Lancaster University. 333 p.

    Research output: ThesisDoctoral Thesis

  379. Published

    Use of Gaussian process regression for radiation mapping of a nuclear reactor with a mobile robot

    West, A., Tsitsimpelis, I., Licata, M., Jazbec, A., Snoj, L., Joyce, M. J. & Lennox, B., 7/07/2021, In: Scientific Reports. 11, 1, 11 p., 13975.

    Research output: Contribution to journalJournal articlepeer-review

  380. Published

    High-throughput continuous hydrothermal synthesis of an entire nanoceramic phase diagram

    Weng, X., Cockcroft, J. K., Hyett, G., Vickers, M., Boldrin, P., Tang, C. C., Thompson, S. P., Parker, J. E., Knowles, J. C., Rehman, I., Parkin, I., Evans, J. R. G. & Darr, J. A., 2009, In: Journal of Combinatorial Chemistry. 11, 5, p. 829-834 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  381. Published

    Synthesis and characterization of doped nano-sized ceria-zirconia solid solutions

    Weng, X., Perston, B., Wang, X. Z., Abrahams, I., Lin, T., Yang, S., Evans, J. R. G., Morgan, D. J., Carley, A. F., Bowker, M., Knowles, J. C., Rehman, I. & Darr, J. A., 2009, In: Applied Catalysis B: Environmental. 90, 3-4, p. 405-415 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  382. Published

    Mechanism-based modeling of solute strengthening: Application to thermal creep in Zr alloy

    Wen, W., Capolungo, L. & Tomé, C. N., 1/07/2018, In: International Journal of Plasticity. 106, p. 88-106 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  383. Published

    A Physics-Based Crystallographic Modeling Framework for Describing the Thermal Creep Behavior of Fe-Cr Alloys

    Wen, W., Capolungo, L., Patra, A. & Tomé, C. N., 1/05/2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 5, p. 2603-2617 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  384. Published

    Mechanical behavior of low carbon steel subjected to strain path changes: Experiments and modeling

    Wen, W., Borodachenkova, M., Tomé, C. N., Vincze, G., Rauch, E. F., Barlat, F. & Grácio, J. J., 1/06/2016, In: Acta Materialia. 111, p. 305-314 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  385. Published

    Modeling of the Mechanical Response During Reversal Shear Loading: Application to Steels

    Wen, W., Borodachenkova, M., Barlat, F., Liao, J. & Grácio, J. J., 1/07/2016, In: Steel Research International. 87, 7, p. 850-858 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  386. Published

    Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling

    Wen, W., Borodachenkova, M., Tomé, C. N., Vincze, G., Rauch, E. F., Barlat, F. & Grácio, J. J., 1/10/2015, In: International Journal of Plasticity. 73, p. 171-183 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  387. Published

    Coupled effects of the lattice rotation definition, twinning and interaction strength on the FCC rolling texture evolution using the viscoplastic φ-model

    Wen, W., M'Guil, S., Ahzi, S. & Gracio, J. J., 2013, In: International Journal of Plasticity. 46, p. 23-36 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  388. Published

    Rolling texture transition in FCC metals using the viscoplastic φ -model and considering mechanical twinning

    Wen, W., M'Guil, S. & Ahzi, S., 2012, In: Materials Science Forum. 702-703, p. 241-244 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  389. Published

    Hardening behavior and texture evolution of TWIP steel during strain path change

    Wen, W., Borodachenkova, M., Pereira, A., Barlat, F. & Gracio, J., 2015, In: IOP Conference Series: Materials Science and Engineering. 82, 1, 4 p., 012089.

    Research output: Contribution to journalJournal articlepeer-review

  390. Published

    Mechanism-based modeling of thermal and irradiation creep behavior: An application to ferritic/martensitic HT9 steel

    Wen, W., Kohnert, A., Arul Kumar, M., Capolungo, L. & Tomé, C. N., 31/03/2020, In: International Journal of Plasticity. 126, 12 p., 102633.

    Research output: Contribution to journalJournal articlepeer-review

  391. Published

    Modeling in Crystal Plasticity: from theory to application

    Wen, W. & Wang, W., 2021, Encyclopedia of Materials: Metals and Alloys. Elsevier, p. 552-560 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNEntry for encyclopedia/dictionary

  392. Published

    Scalability of Network-on-Chip communication architecture for 3-D meshes.

    Weldezion, A. Y., Grange, M., Pamunuwa, D. B., Lu, Z., Jantsch, A., Weerasekera, R. & Tenhunen, H., 12/06/2009, Proc. ACM/IEEE International Symposium on Networks on Chip (NOCS). San Diego: IEEE, p. 114-123 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  393. Published

    Bandwidth optimization for through silicon via (TSV) bundles in 3D integrated circuits.

    Weldezion, A., Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  394. Published

    Amplitude stabilization and active control of a terahertz quantum cascade laser with a graphene loaded split-ring-resonator array

    Wei, B., Kindness, S., Almond, N., Wallis, R., Wu, Y., Ren, Y., Shi, S. C., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. & Degl'Innocenti, R., 15/05/2018, In: Applied Physics Letters. 112, 20, 4 p., 201102.

    Research output: Contribution to journalJournal articlepeer-review

  395. Published

    Amplitude Stabilization of a Terahertz Quantum Cascade Laser with an External Metamaterial Amplitude Modulator

    Wei, B., Kindness, S., Almond, N., Wallis, R., Wu, Y., Ren, Y., Braeuninger-Weimer, P., Hofmann, S., Beere, HE., Ritchie, D. & Degl'Innocenti, R., 13/05/2018, CLEO: Science and Innovations 2018: Conference on Lasers and Electro-Optics OSA Technical Digest. USA: Optical Society of America (OSA), paper STu4D.5

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  396. Published

    Terahertz s-SNOM with >λ/1000 resolution based on self-mixing in quantum cascade lasers

    Wei, B., Wallis, R., Kindness, S., Mitrofanov, O., Beere, H. E., Ritchie, D. A. & Degl'Innocenti, R., 25/06/2017, The European Conference on Lasers and Electro-Optics, CLEO_Europe 2017. IEEE, 1 p. (Optics InfoBase Conference Papers; vol. Part F82-CLEO_Europe 2017).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  397. Published

    Effect of phase transformation on mechanical properties of Al16.80Co20.74Cr20.49Fe21.28Ni20.70 high entropy alloy coatings processed by laser cladding

    Wei, X., Zhang, P., Yu, Z., Yan, H., Wu, D., Shi, H., Chen, J., Lu, Q., Tian, Y., Ma, S. & Lei, W., 5/05/2021, In: Journal of Alloys and Compounds. 862, 16 p., 158563.

    Research output: Contribution to journalJournal articlepeer-review

  398. Published

    Crosstalk immune interconnect driver design.

    Weerasekera, R., Pamunuwa, D. B., Zheng, L. R. & Tenhunen, H., 2004, Proceedings of the international symposium on system-on-chip conference. p. 139-142 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  399. Published

    2-D and 3-D Integration of Heterogeneous Electronic Systems under Cost, Performance and Technological Constraints

    Weerasekera, R., Pamunuwa, D., Zheng, L-R. & Tenhunen, H., 08/2009, In: IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 28, 8, p. 1237-1250 14 p.

    Research output: Contribution to journalJournal article

  400. Published

    Minimal-power, delay-balanced smart repeaters for global interconnects in the nanometer regime.

    Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 05/2008, In: IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 16, 5, p. 589-593 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  401. Published

    Closed-form equations for through-silicon via (TSV) parasitics in 3-D integrated circuits (ICs).

    Weerasekera, R., Pamunuwa, D. B., Grange, M., Tenhunen, H. & Zheng, L-R., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  402. Published

    Extending systems-on-chip to the third dimension : performance, cost and technological tradeoffs.

    Weerasekera, R., Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 11/2007, Proc. IEEE/ACM International Conference on Computer-Aided Design (ICCAD). San Jose, California: IEEE, p. 212-219 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  403. Published

    Early selection of system implementation choice among SoC, SoP and 3-D integration.

    Weerasekera, R., Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 09/2007, Proc. International System-On-Chip Conference (SOCC). Hsin Chu, Taiwan: IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  404. Published

    Delay-balanced smart repeaters for on-chip global signaling.

    Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 12/02/2007, Proc. International Conference on VLSI Design. Bangalore: IEEE, p. 308-313 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  405. Published

    Minimal-power, delay-balanced smart repeaters for interconnects in the nanometer regime.

    Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 03/2006, Proc. International Workshop on System-level Interconnect Prediction (SLIP). Munich: ACM, p. 113-120 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  406. Published

    On signalling over through-silicon via (TSV) interconnects in 3-D integrated circuits.

    Weerasekera, R., Grange, M., Pamunuwa, D. B. & Tenhunen, H., 03/2010, p. 1325-1328. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  407. Published

    Compact modelling of through-silicon vias (TSVs) in three-dimensional (3-D) integrated circuits.

    Weerasekera, R., Grange, M., Pamunuwa, D. B., Tenhunen, H. & Zheng, L-R., 10/2009, Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. San Francisco: IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  408. Published

    Switching sensitive driver circuit to combat dynamic delay in on-chip buses

    Weerasekera, R., Zheng, L-R., Pamunuwa, D. B., Tenhunen, H., Paliouras, V. (ed.), Vounckx, J. (ed.) & Verkest, D. (ed.), 09/2005, Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation: 15th International Workshop, PATMOS 2005, Leuven, Belgium, September 21-23, 2005. Proceedings. Paliouras, V., Vounckx, J. & Verkest, D. (eds.). Berlin: Springer, p. 277-285 9 p. (Lecture Notes in Computer Science; vol. 3728).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  409. Published

    A comparative study on the aqueous photodegradation of two organophosphorus pesticides under simulated and natural sunlight.

    Weber, J., Halsall, C. J., Wargent, J. J. & Paul, N. D., 2009, In: Journal of Environmental Monitoring. 11, 3, p. 654-659 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  410. Published

    The aqueous photodegradation of fenitrothion under various agricultural plastics : implications for pesticide longevity in agricultural 'micro-environments'.

    Weber, J., Halsall, C. J., Wargent, J. J. & Paul, N. D., 06/2009, In: Chemosphere. 76, 1, p. 147-150 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  411. Published

    Carbon dioxide induces increases in guard cell cytosolic free calcium.

    Webb, A. A. R., McAinsh, M. R., Mansfield, T. A. & Hetherington, A. M., 03/1996, In: The Plant Journal. 9, 3, p. 297-304 8 p.

    Research output: Contribution to journalJournal article

  412. Published

    Calcium Ions as Intracellular Second Messengers in Higher Plants.

    Webb, A. A. R., McAinsh, M. R., Taylor, J. E. & Hetherington, A. M., 1996, In: Advances in Botanical Research. 22, p. 45-96 52 p.

    Research output: Contribution to journalJournal article

  413. Published

    Signal transduction in stomatal guard cells.

    Webb, A. A. R., McAinsh, M. R., Mansfield, T. A. & Hetherington, A. M., 1995, In: Journal of Experimental Botany. 46, Supple, p. 58-58 1 p.

    Research output: Contribution to journalJournal articlepeer-review

  414. Published

    The presence of LEA (Late Embryo Abundant) protein homologues in guard cells.

    Webb, A. A. R., Renwick, K. F., Shirras, A. D., Mansfield, T. A. & Hetherington, A. M., 1993, In: Journal of Experimental Botany. 44, Supple, p. P1.9

    Research output: Contribution to journalJournal article

  415. Published

    The role of calcium in ABA-induced gene expression and stomatal movements.

    Webb, A. A. R., Larman, M. G., Montgomery, L. T., Taylor, J. E. & Hetherington, A. M., 05/2001, In: Plant Journal. 26, 3, p. 351-362 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  416. Published

    Recent improvements to a transportable neutron spectrometer (TNS).

    Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 2002, Proceedings of a conference on nuclear instruments and methods in physics research.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  417. Published

    Unique broad-spectrum neutron sensing instrument.

    Weaver, J. A., Joyce, M. J., Peyton, A. J., Roskell, J. & Armishaw, M. J., 2001, In: Review of Scientific Instruments. 72, 4, p. 2043-2047 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  418. Published

    Reliability and usability improvements to a transportable neutron spectrometer (TNS).

    Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000). p. 292-301 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  419. Published

    Signal processing techniques applied to a transportable neutron spectrometer (TNS).

    Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 2000.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  420. Published

    Recent improvements to a transportable neutron spectrometer (TNS).

    Weaver, J. A., Joyce, M. J., Peyton, A. J. & Silvie, J., 2000, Proceedings of the international workshop on neutron field spectrometry in science, technology and radiation protection. Pisa

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  421. Published

    The introduction of digital processing techniques to a neutron sensing system.

    Weaver, J. A., Peyton, A. J., Joyce, M. J. & Silvie, J., 2000, Proceedings of the 2nd conference on postgraduate research in electronics and photonics. p. 30-35 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  422. Published

    Using digital signal processing techniques for neutron spectroscopy.

    Weaver, J. A., Peyton, A. J., Joyce, M. J. & Silvie, J., 2000, Proceedings of the universities nuclear technology forum. University of Bath

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  423. Published

    Recent improvements to a transportable neutron spectrometer (TNS).

    Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 01/2002, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 476, 1-2, p. 143-148 6 p.

    Research output: Contribution to journalJournal article

  424. Published

    Leak detection in power plant heat recovery steam generators utilizing medical radionuclides

    Watkins, D., 2018, Lancaster University. 100 p.

    Research output: ThesisMaster's Thesis

  425. Published

    Over 2000 years in review: revival of the Archimedes screw from pump to turbine

    Waters, S. & Aggidis, G., 11/2015, In: Renewable and Sustainable Energy Reviews. 51, p. 497-505 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  426. Published

    Analysing the performance of the Archimedes screw turbine within tidal range technologies

    Waters, S., 2015, Lancaster University. 184 p.

    Research output: ThesisMaster's Thesis

  427. Published

    Tidal range technologies and state of the art in review

    Waters, S. & Aggidis, G. A., 06/2016, In: Renewable and Sustainable Energy Reviews. 59, p. 514-529 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  428. Published

    A world first: Swansea Bay Tidal lagoon in review

    Waters, S. & Aggidis, G. A., 04/2016, In: Renewable and Sustainable Energy Reviews. 56, p. 916-921 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  429. Published

    Polymeric barrier membranes for device packaging, diffusive control and biocompatibility

    Wasikiewicz, J. M., Roohpour, N., Paul, D., Grahn, M., Ateh, D., Rehman, I. & Vadgama, P., 2008, In: Applied Surface Science. 255, 2, p. 340-343 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  430. Published

    A Fast Model of a 1-D Nonlinear Beam-Wave Interaction for a 225GHz TWT

    Waring, R., Hu, Y. & Paoloni, C., 23/06/2015, 8th UK-Europe-China Workshop on mm-waves and THz Technologies . IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  431. Published

    A fast model of a 1-D nonlinear beam-wave interaction for a 225 GHz TWT

    Waring, R., Hu, Y. & Paoloni, C., 14/09/2015, 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT). IEEE, p. 1-3 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  432. Published

    Lagrangian simulator for Millimetre Wave TWT Based on Non-rotationally Symmetric Slow-Wave Structure

    Waring, R. & Paoloni, C., 09/2017, In: Journal of Electromagnetic Waves and Applications. 31, 17, p. 1902-1913 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  433. Published

    Lagrangian Large Signal Model for Double Corrugated Waveguides

    Waring, R. & Paoloni, C., 25/09/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  434. Published

    Lagrangian Large Signal Model for Double Corrugated Waveguide

    Waring, R. & Paoloni, C., 04/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  435. Published

    Intruder bands in (Z=53) I113: Band termination interpretation

    Waring, M. P., Paul, E. S., Beausang, C. W., Clark, R. M., Cunningham, R. A., Davinson, T., Forbes, S. A., Fossan, D. B., Gale, S. J., Gizon, A., Gizon, J., Hauschild, K., Hibbert, I. M., James, A. N., Jones, P. M., Joyce, M. J., Lafosse, D. R., Page, R. D., Ragnarsson, I., Schnare, H. & 5 others, Sellin, P. J., Simpson, J., Vaska, P., Wadsworth, R. & Woods, P. J., 1995, In: Physical Review C. 51, p. 2427-2438 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  436. Published

    Comparison of couplers for 0.346 THz DCW-BWO

    Waring, R., Paoloni, C., Gamzina, D., Popovic, B., Himes, L., Letizia, R., Tang, Y., Li, H., Pan, P., Feng, J. & Luhmann, N. C., 7/03/2017, Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016. Yu, J. & Chen, X. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 208-209 2 p. 7874013. (Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  437. Published

    Analysis and synthesis of slow wave structures for millimetre wave TWTs

    Waring, R., 30/06/2020, Lancaster University. 177 p.

    Research output: ThesisDoctoral Thesis

  438. Published

    Ultraviolet radiation as a limiting factor in leaf expansion and development.

    Wargent, J. J., Moore, J. P., Ennos, A. R. & Paul, N. D., 01/2009, In: Photochemistry and Photobiology. 85, 1, p. 279-286 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  439. Published

    Mechanisms of response to ultraviolet-b radiation — A whole plant perspective.

    Wargent, J. J. & Paul, N. D., 04/2007, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 146, 4 Supp, p. S228

    Research output: Contribution to journalJournal articlepeer-review

  440. Published

    UV supplementation for growth regulation and disease control.

    Wargent, J. J., Taylor, A. & Paul, N. D., 2006, In: Acta Horticulturae. 711, p. 333-338 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  441. Published

    Forearm bone geometry and mineral content in UK women of European and South-Asian origin

    Ward, K. A., Roy, D. K., Pye, S. R., O'Neill, T. W., Berry, J. L., Swarbrick, C. M., Silman, A. J. & Adams, J. E., 07/2007, In: Bone. 41, 1, p. 117-121 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  442. Published

    Boosting the oxygen evolution activity in non-stoichiometric praseodymium ferrite-based perovskites by A site substitution for alkaline electrolyser anodes

    Ward, S., Isaacs, M. A., Gupta, G., Mamlouk, M. & Pramana, S. S., 1/01/2021, In: Sustainable Energy & Fuels. 5, p. 154-165 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  443. Published

    Construction of nonlinear dynamic MEMS component models using cosserat theory.

    Wang, C., Richardson, A. M. D., Liu, D., Rosing, R., Tucker, R. & De Masi, B., 05/2003, Proceedings of the SPIE design, test, integration and packaging of MEMS symposium. France: Cannes Mandelieu

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  444. Published

    An improved technique for measuring the Pierce impedance of helix slow-wave structures.

    Wang, P., Carter, R. G. & Basu, B. N., 1994, Proceedings of the 24th European microwave conference. Cannes: Nexus

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  445. Published

    Non-minimal state space model-based continuous-time model predictive control with constraints

    Wang, L., Young, P. C., Gawthrop, P. & Taylor, C. J., 06/2009, In: International Journal of Control. 82, 6, p. 1122-1137 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  446. Published

    Integrated sensors for health monitoring in advanced electronic systems

    Wang, C. H., Liu, Y., Desmulliez, M. & Richardson, A., 1/11/2009, Design and Test Workshop (IDT), 2009 4th International. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  447. Published

    Dynamic response of metallic sandwich panles under blast loadings.

    Wang, H., Zha, X. & Ye, J., 05/2012, In: International Journal of Structural Stability and Dynamics. 12, 3, p. - 23 p., 1250017.

    Research output: Contribution to journalJournal articlepeer-review

  448. Published

    Fire resistance performance of FRP rebar reinforced concrete columns.

    Wang, H., Zha, X. & Ye, J., 2009, In: International Journal of Concrete Structures and Materials. 3, 2, p. 111-117 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  449. Published

    Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach

    Wang, Y., Ma, X. & Joyce, M., 09/2012. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  450. Published

    Component repair using laser direct metal deposition

    Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, KC. (eds.). London: Springer Verlag, p. 345-350 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  451. Published

    A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition

    Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  452. Published

    Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design

    Wang, G., Ma, X., Hua, T. & Zhang, D., 2013, In: Advanced Robotics. 27, 8, p. 597-609 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  453. Published

    Enhancing condition monitoring of distributed generation systems through optimal sensor selection

    Wang, Y., Ma, X. & Joyce, M., 2013, Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE. Piscataway, N.J.: IEEE, p. 7610-7616 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  454. Unpublished

    Variable selection for wind turbine condition monitoring and fault detection system

    Wang, Y., 2016, (Unpublished) 260 p.

    Research output: ThesisDoctoral Thesis

  455. Published

    Reducing sensor complexity for monitoring wind turbine performance using principal component analysis

    Wang, Y., Ma, X. & Joyce, M. J., 11/2016, In: Renewable Energy. 97, p. 444–456 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  456. Published

    Wind turbine fault detection and identification through PCA-based optimal variable selection

    Wang, Y., Ma, X. & Qian, P., 10/2018, In: IEEE Transactions on Sustainable Energy. 9, 4, p. 1627-1635 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  457. Published

    Micromachined thick mesh filters for millimeter-wave and terahertz applications

    Wang, Y., Yang, B., Tian, Y., Donnan, R. S. & Lancaster, M. J., 03/2014, In: IEEE Transactions on Terahertz Science and Technology. 4, 2, p. 247-253 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  458. Published

    Plug-In Repetitive Control Strategy for High-Order Wide-Output Range Impedance-Source Converters

    Wang, Y., Darwish, A., Holliday, D. & Williams, B. W., 1/08/2017, In: IEEE Transactions on Power Electronics . 32, 8, p. 6510-6522 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  459. Published

    A model for predicting smoke back-layering length in tunnel fires with the combination of longitudinal ventilation and point extraction ventilation in the roof

    Wang, J., Yuan, J., Fang, Z., Tang, Z., Qian, P. & Ye, J., 1/10/2018, In: Tunnelling and Underground Space Technology. 80, p. 16-25 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  460. Published

    Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration: OMAE2019‑96755

    Wang, F., Amaechi, C. V., Hou, X. & Ye, J., 10/06/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  461. Published

    System study using injection phase locked magnetron as an alternative source for superconducting radio frequency accelerator

    Wang, H., Plawski, T., Rimmer, R., Dexter, A., Tahir, I., Neubauer, M. & Dudas, A., 1/01/2014, IEEE International Vacuum Electronics Conference, IVEC 2014. IEEE Computer Society Press, p. 443-444 2 p. 6857680. (IEEE International Vacuum Electronics Conference, IVEC 2014).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  462. Published

    Use of an injection locked magnetron to drive a superconducting RF cavity

    Wang, H., Davis, K., Rimmer, R., Tahir, I., Dexter, A. C., Burt, G. & Carter, R. G., 1/12/2010, IPAC 2010 - 1st International Particle Accelerator Conference. p. 4026-4028 3 p. (IPAC 2010 - 1st International Particle Accelerator Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  463. Published

    Gas phase selective hydrogenation of phenylacetylene to styrene over Au/Al2O3

    Wang, X. & Keane, M. A., 1/12/2019, In: Journal of Chemical Technology and Biotechnology. 94, 12, p. 3772–3779 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  464. Published

    Cofactor NAD(P)H regeneration inspired by heterogeneous pathways

    Wang, X., Saba, T., Yiu, H. H. P., Howe, R. F., Anderson, J. A. & Shi, J., 11/05/2017, In: Chem. 2, 5, p. 621-654 34 p.

    Research output: Contribution to journalJournal articlepeer-review

  465. Published

    Heterogeneous catalysis mediated cofactor NADH regeneration for enzymatic reduction

    Wang, X. & Yiu, H. H. P., 18/02/2016, In: ACS Catalysis. 6, 3, p. 1880-1886 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  466. Published

    Selective gas phase hydrogenation of nitroarenes over Mo2C-supported Au-Pd

    Wang, X., Perret, N., Delannoy, L., Louis, C. & Keane, M. A., 21/09/2016, In: Catalysis Science and Technology. 6, 18, p. 6932-6941 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  467. Published

    Selective gas phase hydrogenation of p-nitrobenzonitrile to p-aminobenzonitrile over zirconia supported gold

    Wang, X., Hao, Y. & Keane, M. A., 1/01/2016, In: Applied Catalysis A: General. 510, p. 171-179 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  468. Published

    Harnessing the selective catalytic action of supported gold in hydrogenation applications

    Wang, X., Li, M. & Keane, M. A., 2014, Heterogeneous Gold Catalysts and Catalysis. Ma, Z. & Dai, S. (eds.). Royal Society of Chemistry (Great Britain), p. 424-461 38 p. (RSC Catalysis Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  469. Published

    Toward sustainable chemoselective nitroarene hydrogenation using supported gold as catalyst

    Wang, X., Cardenas-Lizana, F. & Keane, M. A., 2014, In: ACS Sustainable Chemistry & Engineering. 2, 12, p. 2781-2789 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  470. Published

    Gas phase hydrogenation of nitrocyclohexane over supported gold catalysts

    Wang, X., Perret, N. & Keane, M. A., 2013, In: Applied Catalysis A: General. 467, p. 575-584 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  471. Published

    Reducible support effects in the gas phase hydrogenation of p-chloronitrobenzene over gold

    Wang, X., Perret, N., Delgado, J. J., Blanco, G., Chen, X., Olmos, C. M., Bernal, S. & Keane, M. A., 2013, In: Journal of Physical Chemistry C. 117, 2, p. 994-1005 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  472. Published

    The role of hydrogen partial pressure in the gas phase hydrogenation of p-chloronitrobenzene over alumina supported Au and Pd: A consideration of reaction thermodynamics and kinetics

    Wang, X., Perret, N. & Keane, M. A., 2012, In: Chemical Engineering Journal. 210, p. 103-113 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  473. Published

    Hydrogen production by sorption enhanced steam reforming of propane: A thermodynamic investigation

    Wang, X., Wang, N. & Wang, L., 2011, In: International Journal of Hydrogen Energy. 36, 1, p. 466-472 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  474. Published

    Hydrogen production by glycerol steam reforming with in situ hydrogen separation: A thermodynamic investigation

    Wang, X., Wang, N., Li, M., Li, S., Wang, S. & Ma, X., 2010, In: International Journal of Hydrogen Energy. 35, 19, p. 10252-10256 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  475. Published

    Hydrogen production by glycerol steam reforming with/without calcium oxide sorbent: A comparative study of thermodynamic and experimental work

    Wang, X., Li, M., Li, S., Wang, H., Wang, S. & Ma, X., 2010, In: Fuel Processing Technology. 91, 12, p. 1812-1818 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  476. Published

    Thermodynamic analysis of propane dry and steam reforming for synthesis gas or hydrogen production

    Wang, X., Wang, N., Zhao, J. & Wang, L., 2010, In: International Journal of Hydrogen Energy. 35, 23, p. 12800-12807 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  477. Published

    Thermodynamic analysis of glycerol dry reforming for hydrogen and synthesis gas production

    Wang, X., Li, M., Wang, M., Wang, H., Li, S., Wang, S. & Ma, X., 1/11/2009, In: Fuel. 88, 11, p. 2148-2153 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  478. Published

    Thermodynamic analysis of hydrogen production from glycerol autothermal reforming

    Wang, H., Wang, X., Li, M., Li, S., Wang, S. & Ma, X., 2009, In: International Journal of Hydrogen Energy. 34, 14, p. 5683-5690 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  479. Published

    Thermodynamic analysis of glycerin steam reforming

    Wang, X., Li, S., Wang, H., Liu, B. & Ma, X., 2008, In: Energy and Fuels. 22, 6, p. 4285-4291 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  480. Published

    Experimental investigation on the failure modes of grouted sleeve connections under thermal and mechanical loads

    Wang, T., Xu, H., Yu, M., Xu, L. & Ye, J., 1/01/2020, In: Engineering Failure Analysis. 109, 12 p., 104246.

    Research output: Contribution to journalJournal articlepeer-review

  481. Published

    Microstructures and mechanical properties of ni60 alloy fabricated by laser metal deposition

    Wang, W., Liu, L., Zhang, X., Shi, Z., Tian, Y. & Lin, J., 20/01/2020, In: MATERIALS RESEARCH EXPRESS. 7, 1, 9 p., 016569.

    Research output: Contribution to journalJournal articlepeer-review

  482. Published

    The gravity load simulator – Re-visited

    Wang, P. & Turvey, G. J., 1/08/2020, In: structures. 26, p. 204-213 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  483. Published

    Multi-scale deep intra-class transfer learning for bearing fault diagnosis

    Wang, X., Shen, C., Xia, M., Wang, D., Zhu, J. & Zhu, Z., 1/10/2020, In: Reliability Engineering and System Safety. 202, 15 p., 107050.

    Research output: Contribution to journalJournal articlepeer-review

  484. Published

    Stable Autonomous Robotic Wheelchair Navigation in the Environment with Slope Way

    Wang, C., Xia, M. & Meng, MQ-H., 22/10/2020, In: IEEE Transactions on Vehicular Technology. 69, 10, p. 10759-10771 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  485. Published

    Efficient Data Reduction at the Edge of Industrial Internet of Things for PMSM Bearing Fault Diagnosis

    Wang, X., Lu, S., Huang, W., Wanga, Q., Zhang, S. & Xia, M., 1/03/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 12 p., 3508612.

    Research output: Contribution to journalJournal articlepeer-review

  486. Published

    Experimental investigation on the post-fire cyclic behavior of grouted sleeve connections

    Wang, T., Yu, M., Li, X., Yan, Z., Saafi, M. & Ye, J., 12/04/2021, In: Construction and Building Materials. 279, 13 p., 122394.

    Research output: Contribution to journalJournal articlepeer-review

  487. Published

    Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties

    Wang, W., Wang, S., Zhang, X., Chen, F., Xu, Y. & Tian, Y., 30/04/2021, In: Journal of Manufacturing Processes. 64, p. 530-543 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  488. Published

    Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro-textures

    Wang, W., Wang, S., Zhang, X., Xu, Y., Tian, Y. & Huang, H., 15/07/2021, In: Materials Letters. 295, 4 p., 129872.

    Research output: Contribution to journalJournal articlepeer-review

  489. Published

    Deformation mechanisms in hexagonal close-packed high-entropy alloys

    Wang, Z., Bao, M. L., Wang, X. J., Liaw, P. K., Guo, R. P. & Qiao, J. W., 7/05/2021, In: Journal of Applied Physics. 129, 17, 10 p., 175104.

    Research output: Contribution to journalJournal articlepeer-review

  490. Published

    Stray Flux-Based Rotation Angle Measurement for Bearing Fault Diagnosis in Variable-Speed BLDC Motors

    Wang, X., Lu, S., Cao, W., Xia, M., Chen, K., Ding, J. & Zhang, S., 31/12/2021, In: IEEE Transactions on Energy Conversion. 36, 4, p. 3156-3166 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  491. Published

    Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact

    Wang, X-E., Huang, X-H., Yang, J., Hou, X., Zhu, Y. & Xie, D., 15/09/2021, In: International Journal of Mechanical Sciences. 206, 20 p., 106613.

    Research output: Contribution to journalJournal articlepeer-review

  492. Published

    Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process

    Wang, W., Du, M., Zhang, X., Luan, C. & Tian, Y., 1/07/2021, In: Materials. 14, 13, 15 p., 3700.

    Research output: Contribution to journalJournal articlepeer-review

  493. Published

    The femtosecond laser induced Zr64.13Cu15.75Ni10.12Al10 amorphous periodic surface structure

    Wang, J., Zhang, P., Shen, L., Yu, Z., Shi, H. & Tian, Y., 30/09/2021, In: Journal of Manufacturing Processes. 69, p. 613-620 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  494. Published
  495. Published

    A 3D imaging system for measuring the shape and volume of the human body.

    Wan-Daud, W. A., Tapp, H. S., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 358-363 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  496. Published

    EPass Using DRM in Symbian v8 OS and TrustZone : Securing Vital Data on Mobile Devices.

    Wan Hussin, W., Edwards, R. & Coulton, P., 06/2006, Mobile Business, 2006. ICMB '06. International Conference on. IEEE, 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  497. Published

    Mobile Ticketing System Employing TrustZone Technology.

    Wan Hussin, W., Coulton, P. & Edwards, R., 07/2005, Mobile Business, 2005. ICMB 2005. International Conference on. IEEE, p. 651-654 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  498. Published

    Mapping Nanostructural Variations in Silk by Secondary Electron Hyperspectral Imaging

    Wan, Q., Abrams, K. J., Masters, R. C., Talari, A. C. S., Rehman, I. U., Claeyssens, F., Holland, C. & Rodenburg, C., 20/12/2017, In: Advanced Materials. 29, 47, 6 p., 1703510.

    Research output: Contribution to journalJournal articlepeer-review

  499. Published

    Ieee Access Special Section Editorial: Key Technologies for Smart Factory of Industry 4.0

    Wan, J., Xia, M., Hong, J., Pang, Z., Jayaraman, B. & Shen, F., 20/02/2019, In: IEEE Access. 7, p. 17969-17974 6 p., 8643705.

    Research output: Contribution to journalEditorialpeer-review

  500. Published

    Fog Computing for Energy-Aware Load Balancing and Scheduling in Smart Factory

    Wan, J., Chen, B., Wang, S., Xia, M., Li, D. & Liu, C., 1/10/2018, In: IEEE Transactions on Industrial Informatics. 14, 10, p. 4548-4556 9 p., 8323243.

    Research output: Contribution to journalJournal articlepeer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Back to top