Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    Profiling the depth of caesium-137 contamination in concrete via a relative linear attenuation model.

    Shippen, A. & Joyce, M. J., 03/2010, In: Applied Radiation and Isotopes. 68, 4-5, p. 631-634 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  2. Published

    Extension of the Linear Depth Attenuation Method for the Radioactivity Depth Analysis Tool (RADPAT)

    Shippen, A. & Joyce, M., 2011, In: IEEE Transactions on Nuclear Science. 58, 3, p. 1145-1150 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  3. Published

    The design and calibration of a phantom for depth profiling measurements of entrained radioactivity in silica-based media

    Shippen, A. & Joyce, M., 2011, In: Nuclear Engineering and Design. 241, 2, p. 526-532 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  4. Published

    Inverse radiation modelling for plant characterisation

    Shippen, B. A., Adams, J., Joyce, M. J. & Mellor, M. P., 2012, 2012 IEEE Nuclear Science Symposium and Medical Imaging Conference Record (NSS/MIC). IEEE, p. 284-294 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Published

    Beam dynamics simulations of the CLIC crab cavity and implications on the BDS

    Shinton, I. R. R., Burt, G., Glasman, C. J., Jones, R. M. & Wolski, A., 21/11/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 657, 1, p. 126-130 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  6. Published

    Efficient interference mitigation in mmWave backhaul network for high data rate 5G wireless communications

    Shi, J., Ni, Q., Paoloni, C. & Magne, F., 09/2016, Proceedings of the 12th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM2016). London: IET Press, p. 382-387 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  7. Published

    Modeling and Analysis of Point-to-Multipoint Millimeter-Wave Backhaul Networks

    Shi, J., Lv, L., Ni, Q., Pervaiz, H. & Paoloni, C., 01/2019, In: IEEE Transactions on Wireless Communications. 18, 1, p. 268-285 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  8. Published

    Experimental determination and thermodynamic correlation of 7-amino-4-methylcoumarin solubility in various cosolvency mixtures at (278.15–323.15) K

    Shi, Y., Zhang, H., Hong, X. & Wang, X., 9/01/2020, In: Journal of Chemical and Engineering Data. 65, 1, p. 209-216 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  9. Published

    Solubility behavior and thermodynamic modeling of inosine (form β) in four cosolvency systems at T = 278.15 to 323.15 K

    Shi, Y., Zhang, H. & Wang, X., 9/04/2020, In: Journal of Chemical and Engineering Data. 65, 4, p. 2170-2177 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  10. Published

    Simulation of optical behavior of YAG:Ce3+@SiO2 phosphor used for chip scale packages WLED

    Shi, Y., Su, X., Zhu, H., Fu, R., He, Q., Zhu, M. & Ren, H., 30/04/2022, In: JOURNAL OF LUMINESCENCE. 244

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Effect of pH, polymer concentration and molecular weight on the physical state properties of tolfenamic acid

    Sheraz, M. A., Ahmed, S. & Rehman, I. U., 2015, In: Pharmaceutical Development and Technology. 20, 3, p. 352-360 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  12. Published

    Microstructure effects on transverse cracking in composite laminae by DEM

    Sheng, Y., Yang, D., Tan, Y. & Ye, J., 30/11/2010, In: Composites Science and Technology. 70, 14, p. 2093-2101 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    State space solution for thick laminated piezoelectric plates with clamped and electric open-circuited boundary conditions

    Sheng, H. Y., Wang, H. & Ye, J. Q., 09/2007, In: International Journal of Mechanical Sciences. 49, 7, p. 806-818 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  14. Published

    State space solution for axisymmetric bending of angle-ply laminated cylinder with clamped edges

    Sheng, H. Y. & Ye, J. Q., 04/2005, In: Composite Structures. 68, 1, p. 119-128 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  15. Published

    A three-dimensional state space finite element solution for laminated composite cylindrical shells

    Sheng, H. Y. & Ye, J. Q., 2003, In: Computer Methods in Applied Mechanics and Engineering. 192, 22-24, p. 2441-2459 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  16. Published

    A semi-analytical finite element for laminated composite plates

    Sheng, H. Y. & Ye, J. Q., 07/2002, In: Composite Structures. 57, 1-4, p. 117-123 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  17. Published

    A state space finite element for laminated composite plates

    Sheng, H. Y. & Ye, J. Q., 16/08/2002, In: Computer Methods in Applied Mechanics and Engineering. 191, 37-38, p. 4259-4276 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  18. Published

    Free-edge effect in cross-ply laminated plates under a uniform extension

    Sheng, H. Y. & Ye, J. Q., 09/2004, In: Structural Engineering and Mechanics. 18, 3, p. 377-388 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  19. Published

    State variable method for transient heat conduction analysis of composite sold cylinder

    Sheng, H. Y., Li, H. P., Ye, J. Q. & Wu, X. T., 1/02/2011, In: Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University. 45, 2, p. 247-251 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  20. Published

    Hydrodynamic studies of floating structures: Comparison of wave-structure interaction modelling

    Sheng, W., Tapoglou, E., Ma, X., Taylor, C. J., Dorrell, R. M., Parsons, D. R. & Aggidis, G., 1/04/2022, In: Ocean Engineering. 249, 16 p., 110878.

    Research output: Contribution to journalJournal articlepeer-review

  21. Published

    Time‐Domain Implementation and Analyses of Multi‐Motion Modes of Floating Structures

    Sheng, W., Tapoglou, E., Ma, X., Taylor, C. J., Dorrell, R. M., Parsons, D. R. & Aggidis, G., 13/05/2022, In: Journal of Marine Science and Engineering (JMSE). 10 , 5, 24 p., 662.

    Research output: Contribution to journalJournal articlepeer-review

  22. Published

    Non-linear FEM for RC shear wall structures

    Shen, PS., Ye, J. & Cai, SB., 1999, Developments in Analysis & Design Using FEM: 7th Int. Conf. Civil. Struct. Eng., Oxford. Topping, B. H. V. & Kumar, B. (eds.). Stirling: Civil-Comp press, p. 181-186 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    Discovery of marageing steels: machine learning vs. physical metallurgical modelling

    Shen, C., Wang, C., Rivera-Díaz-del-Castillo, P. E. J., Xu, D., Zhang, Q., Zhang, C. & Xu, W., 10/10/2021, In: Journal of Materials Science and Technology. 87, 10, p. 258-268 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  24. Published

    Protein adsorption capability on polyurethane and modified-polyurethane membrane for periodontal guided tissue regeneration applications

    Sheikh, Z., Khan, A. S., Roohpour, N., Glogauer, M. & Rehman, I. U., 1/11/2016, In: Materials Science and Engineering: A. 68, p. 267-275 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  25. Published

    New plasmonic materials based split ring resonators for high frequency applications

    Sharples, E. & Letizia, R., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  26. Published

    Wakefield excitation via metasurface-loaded waveguide

    Sharples, E. & Letizia, R., 2014, Proceedings of IPAC2014, Dresden, Germany. Geneva: JACoW, p. 1437-1439 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  27. Published

    InSb grating for Smith-Purcell THz radiation

    Sharples, E. & Letizia, R., 2014. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  28. Published

    Investigation of CSRR loaded waveguide for accelerator applications

    Sharples, E. & Letizia, R., 11/2014, In: Journal of Instrumentation. 13 p., P11017.

    Research output: Contribution to journalJournal articlepeer-review

  29. Published

    Optimization studies on CSRR loaded waveguide for particle accelerator applications

    Sharples, E. & Letizia, R., 2015, Abstracts 2015 IEEE International Conference on Plasma Sciences (ICOPS). IEEE, 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  30. Published

    Electron beam excitation of CSRR loaded waveguide for Cherenkov radiation

    Sharples, E. & Letizia, R., 1/09/2015, In: Proceedings of SPIE. 9544, 8 p., 95442L.

    Research output: Contribution to journalJournal articlepeer-review

  31. Published

    THz Wakefield radiation generation via dielectric Bragg waveguide

    Sharples, E. & Letizia, R., 2015, Advanced Electromagnetic Materials in Microwaves and Optics (METAMATERIALS), 2015 9th International Congress on. IEEE, p. 289-291 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  32. Unpublished

    Artificial engineered materials for novel accelerator applications

    Sharples, E., 2016, (Unpublished) Lancaster University. 210 p.

    Research output: ThesisDoctoral Thesis

  33. Published

    Design considerations on complementary split ring resonator-loaded waveguides for Wakefield generation

    Sharples, E. & Letizia, R., 12/2016, In: IEEE Transactions on Plasma Science. 44, 12, p. 3281-3287 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  34. Published

    Wakefield excitation via a metasurface-loaded waveguide

    Sharples, E. & Letizia, R., 1/07/2014, IPAC 2014: Proceedings of the 5th International Particle Accelerator Conference. Joint Accelerator Conferences Website (JACoW), p. 1437-1439 3 p. (IPAC 2014: Proceedings of the 5th International Particle Accelerator Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    Keynote address: mechatronics - the design challenge: an overview of the issues raised during the optimal design of mechatronic systems and products.

    Sharpe, J., 1994, Mechatronics - the basis for a new industrial development. Acar, M., Makra, J. & Penney, E. (eds.). Southampton: Computational Mechanics Publications

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  36. Published

    Application of bond graph methodology to concurrent conceptual design of interdisciplinary systems.

    Sharpe, J. & Bracewell, R. H., 10/1993, Proceedings of IEEE/SSMC conference: 1993, International Conference on Systems, Man and Cybernetics, Le Touquet - France. Piscataway, NJ: IEEE, Vol. 1. p. 7-13 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  37. Published

    Application of bond graphs in complex concurrent multi-disciplinary engineering design

    Sharpe, J. & Goodwin, E. M., 1993, Proceedings of the 1993 international conference on bond graph modelling and simulation. San Diego: US Society for Computer Simulation, p. 7-13 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  38. Published

    Quality control of dielectric loss in oil-filled EHV power cables.

    Sharpe, J. & Milnes, A. J., 1993, Proceedings of the third international conference on power cables. London: IEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  39. Published

    Modelling the potential of adsorbed hydrogen for use in aviation

    Sharpe, J. E., Bimbo, N., Ting, V. P., Rechain, B., Joubert, E. & Mays, T. J., 06/2015, In: Microporous and Mesoporous Materials. 209, p. 135-140 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  40. Published

    Supercritical hydrogen adsorption in nanostructured solids with hydrogen density variation in pores

    Sharpe, J. E., Bimbo, N., Ting, V. P., Burrows, A. D., Jiang, D. & Mays, T. J., 04/2013, In: Adsorption-Journal of the International Adsorption Society. 19, 2, p. 643-652 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  41. Published

    Exploring PANI-TiN Nanoparticle Coatings in a PEFC Environment: Enhancing Corrosion Resistance and Conductivity of Stainless Steel Bipolar Plates

    Sharma, S., Zhang, K., Gupta, G. & Santamaria, D. G., 7/08/2017, In: Energies. 10, 8, 13 p., 1152.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    An integrated diagnostic reconfiguration (IDR) technique for fault tolerant mixed signal microsystems.

    Sharif, E., Dorey, A. P. & Richardson, A. M. D., 1998, Proceedings of the IEEE international circuits and systems symposium. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  43. Published

    Reconfigurable smart sensors for dependable systems

    Sharif, E., Richardson, A. & Dorey, T., 1/11/1997, Hardware Systems for Dependable Applications (Digest No: 1997/335), IEE Half-Day Colloquium on. IEEE, p. 2/1 -2/6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  44. Published

    Dental materials for cleft palate repair

    Sharif, F., Ur Rehman, I., Muhammad, N. & MacNeil, S., 1/04/2016, In: Materials Science and Engineering: A. 61, p. 1018-1028 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  45. Published

    Bioresorbable antibacterial PCL-PLA-nHA composite membranes for oral and maxillofacial defects

    Sharif, F., Tabassum, S., Mustafa, W., Asif, A., Zarif, F., Tariq, M., Siddiqui, S. A., Gilani, M. A., Rehman, I. U. & MacNeil, S., 1/04/2019, In: POLYMER COMPOSITES. 40, 4, p. 1564-1575 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  46. Published

    Developing A Synthetic Composite Membrane For Cleft Palate Repair

    Sharif, F., Roman, S., Asif, A., Gigliobianco, G., Ghafoor, S., Tariq, M., Siddiqui, S. A., Mahmood, F., Muhammad, N., Rehman, I. U. & MacNeil, S., 1/07/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 7, p. 1178-1189 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    Incidence and management of cleft lip and palate in Pakistan

    Sharif, F., Mahmood, F., Azhar, M. J., Asif, A., Zahid, M., Muhammad, N., Rehman, I. U. & Neil, S. M., 30/05/2019, In: Journal of the American Medical Informatics Association : JAMIA. 69, 5, p. 632-639 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    Investigation of the phase transformations in Ti-22Al-25Nb alloy

    Shao, B., Zong, Y., Wen, D., Tian, Y. & Shan, D., 04/2016, In: Materials Characterization. 114, p. 75-78 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  49. E-pub ahead of print

    Intelligent fault diagnosis of rotor-bearing system under varying working conditions with modified transfer CNN and thermal images

    Shao, H., Xia, M., Han, G., Zhang, Y. & Wan, J., 30/06/2020, (E-pub ahead of print) In: IEEE Transactions on Industrial Informatics.

    Research output: Contribution to journalJournal articlepeer-review

  50. Published

    Fault diagnosis of a rotor-bearing system under variable rotating speeds using two-stage parameter transfer and infrared thermal images

    Shao, H., Li, W., Xia, M., Zhang, Y., Shen, C., Williams, D., Kennedy, A. & De Silva, C. W., 10/09/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  51. Published

    Modified Stacked Autoencoder Using Adaptive Morlet Wavelet for Intelligent Fault Diagnosis of Rotating Machinery

    Shao, H., Xia, M., Wan, J. & de Silva, C. W., 28/02/2022, In: IEEE ASME Trans Mechatron. 27, 1, p. 24-33 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  52. Published

    Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications

    Shanjani, Y., Pinkerton, A. J. & Toyserkani, E., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 489-494 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  53. Published

    A SU8 micromachined WR-1.5 band waveguide filter

    Shang, X., Tian, Y., Lancaster, M. J. & Singh, S., 2013, In: IEEE Microwave and Wireless Components Letters. 23, 6, p. 300-302 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  54. Published

    Action conditional recurrent Kalman networks for forward and inverse dynamics learning

    Shaj, V., Becker, P., Buchler, D., Pandya, H., van Duijkeren, N., Taylor, C. J., Hanheide, M. & Neumann, G., 18/11/2020, Proceedings of Machine Learning Research.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  55. Published

    Development of K-doped ZnO nanoparticles encapsulated crosslinked chitosan based new membranes to stimulate angiogenesis in tissue engineered skin grafts

    Shahzadi, L., Chaudhry, A. A., Aleem, A. R., Malik, M. H., Ijaz, K., Akhtar, H., Alvi, F., Khan, A. F., Rehman, I. U. & Yar, M., 1/12/2018, In: International Journal of Biological Macromolecules. 120, p. 721-728 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  56. Published

    Triethyl orthoformate covalently cross-linked chitosan-(poly vinyl) alcohol based biodegradable scaffolds with heparin-binding ability for promoting neovascularisation

    Shahzadi, L., Yar, M., Jamal, A., Siddiqi, S. A., Chaudhry, A. A., Zahid, S., Tariq, M., Rehman, I. U. & MacNeil, S., 1/06/2016, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 31, 4, p. 582-593 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  57. Published

    Thyroxine impregnated chitosan-based dressings stimulate angiogenesis and support fast wounds healing in rats: Potential clinical candidates

    Shahzadi, L., Bashir, M., Tehseen, S., Zehra, M., Mehmood, A., Chaudhry, A. A., Rehman, I. U. & Yar, M., 1/10/2020, In: International Journal of Biological Macromolecules. 160, p. 296-306 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    A new synthetic methodology for the preparation of biocompatible and organo-soluble barbituric- and thiobarbituric acid based chitosan derivatives for biomedical applications

    Shahzad, S., Shahzadi, L., Mahmood, N., Siddiqi, S. A., Rauf, A., Manzoor, F., Chaudhry, A. A., Rehman, I. U. & Yar, M., 1/09/2016, In: Materials Science and Engineering: A. 66, p. 156-163 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  59. Published

    Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys

    Shah, K., Pinkerton, A. J., Salman, A. & Li, L., 2010, In: Materials and Manufacturing Processes. 25, 12, p. 1372-1380 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  60. Published

    Direct diode laser deposition of functionally graded Ti-6AL-4V and inconel 718 components

    Shah, K., Pinkerton, A. J., Moat, R., Li, L. & Preuss, M., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 273-278 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  61. Published

    The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys

    Shah, K., Salman, A., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 569-576 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  62. Published

    Parametric study of development of inconel-steel functionally graded materials by laser direct metal deposition

    Shah, K., ul Haq, I., Khan, A., Shah, S. A., Khan, M. & Pinkerton, A., 02/2014, In: Materials and Design. 54, p. 531-538 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Microfabrication of flexible large-area terahertz fishnet metamaterials

    Shah, C. M., Sriram, S., Bhaskaran, M., Khodasevych, I. E., Withayachumnankul, W., Ung, B. S. Y., Lin, H., Abbott, D. & Mitchell, A., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  64. Published

    Acid catalysed synthesis of bioactive glass by evaporation induced self assembly method

    Shah, A. T., Ain, Q., Chaudhry, A. A., Ahmad, S., Zarif, F., Siddiqi, S. A., bin Qasim, S., Goerke, O., Khan, A. S. & Rehman, I. U., 1/01/2018, In: Journal of Non-Crystalline Solids. 479, p. 1-8 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  65. Published

    A study of the effect of precursors on physical and biological properties of mesoporous bioactive glass

    Shah, A. T., Ain, Q., Chaudhry, A. A., Khan, A. F., Iqbal, B., Ahmad, S., Siddiqi, S. A. & Rehman, I., 1/02/2015, In: Journal of Materials Science. 50, 4, p. 1794-1804 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  66. Published

    Effect of calcium hydroxide on mechanical strength and biological properties of bioactive glass

    Shah, A. T., Batool, M., Chaudhry, A. A., Iqbal, F., Javaid, A., Zahid, S., Ilyas, K., bin Qasim, S., Khan, A. F., Khan, A. S. & ur Rehman, I., 1/08/2016, In: Journal of the Mechanical Behavior of Biomedical Materials. 61, p. 617-626 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  67. Published

    Tri-layered functionally graded membrane for potential application in periodontal regeneration

    Shah, A. T., Zahid, S., Ikram, F., Maqbool, M., Chaudhry, A. A., Rahim, M. I., Schmidt, F., Goerke, O., Khan, A. S. & Rehman, I. U., 1/10/2019, In: Materials Science and Engineering C. 103, 7 p., 109812.

    Research output: Contribution to journalJournal articlepeer-review

  68. Published

    State of the art of UV water treatment technologies and hydraulic design optimisation using computational modelling

    Shah, J., Zidonis, A. & Aggidis, G., 30/06/2021, In: Journal of Water Process Engineering. 41, 7 p., 102099.

    Research output: Contribution to journalJournal articlepeer-review

  69. Published

    Study of wettability and cell viability of H implanted stainless steel

    Shafique, M. A., Ahmad, R. & Rehman, I. U., 9/03/2018, In: MATERIALS RESEARCH EXPRESS. 5, 3, 5 p., 036509.

    Research output: Contribution to journalJournal articlepeer-review

  70. Published

    An in situ electrochemical quartz crystal microbalance study of polycrystalline gold electrodes in nitric acid solution

    Shackleford, S. G. D., Boxall, C., Port, S. N. & Taylor, R. J., 13/12/2002, In: Journal of Electroanalytical Chemistry. 538-539, p. 109-119 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    Proportional-integral-plus control of a class of nonlinear systems using exact and partial linearisation by feedback.

    Shaban, E. M. & Taylor, C. J., 2005, Proceedings of the international conference on automatic control and system engineering (ACSE-05).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  72. Published

    Nonlinear control system design for construction robots: estimation, partial linearization by feedback and state-dependent-parameter control.

    Shaban, E. M., Zied, K., Taylor, C. J. & Seward, D. W., 2005, Proceedings of the 22nd international symposium on automation and robotics in construction (ISARC-05).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  73. Published

    State dependent parameter proportional-integral-plus (SDP-PIP) control of a nonlinear robot digger arm.

    Shaban, E. M., Taylor, C. J. & Chotai, A., 2004, Proceedings of the UKACC international conference on control. 59 ed.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  74. Published

    Development of an automated verticality alignment system for a vibro-lance

    Shaban, E. M., Ako, S., Taylor, C. J. & Seward, D. W., 07/2008, In: Automation in Construction. 17, 5, p. 645-655 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  75. Published

    Exact linearization by feedback of state dependent parameter models applied to a mechatronics demonstrator

    Shaban, E. M., Nada, A. A. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  76. Published

    The sower's way: quantifying the narrowing net-energy pathways to a global energy transition

    Sgouridis, S., Csala, D. & Bardi, U., 7/09/2016, In: Environmental Research Letters. 11, 9, 8 p., 094009.

    Research output: Contribution to journalJournal articlepeer-review

  77. Published

    A framework for defining sustainable energy transitions: principles, dynamics, and implications

    Sgouridis, S. & Csala, D., 2/05/2014, In: Sustainability. 6, 5, p. 2601-2622 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  78. Published

    Comparative net energy analysis of renewable electricity and carbon capture and storage

    Sgouridis, S., Carbajales-Dale, M., Csala, D., Chiesa, M. & Bardi, U., 8/04/2019, In: Nature Energy. 4, p. 456–465 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  79. Published

    Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys

    Sezer, H. K., Li, L., Schmidt, M., Pinkerton, A. J., Anderson, B. & Williams, P., 12/2006, In: International Journal of Machine Tools and Manufacture. 46, 15, p. 1972-1982 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  80. Published

    An investigation into delamination mechanisms in inclined laser drilling of thermal barrier coated aerospace superalloys

    Sezer, H. K., Pinkerton, A. J., Li, L. & Byrd, P., 2005, In: Journal of Laser Applications. 17, 4, p. 225-234 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  81. Published

    The use of robotics and automation in nuclear decommissioning.

    Seward, D. W. & Bakari, M. J., 2005, Proceedings of the 22nd international symposium on automation and robotics in construction.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  82. Published

    Formula student – the problem of learning and assessment.

    Seward, D. W. & Quayle, S. D., 2004, Proceedings of the international conference on innovation, good practice and research in engineering education. Vol. 2. p. 99-104 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  83. Published

    Criteria for the selection of a software development environment for construction robotic systems.

    Seward, D. W. & Zied, K., 2003, Proceedings of the 20th international symposium on automation and robotics in construction. p. 407-412 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  84. Published

    Towards a comprehensive feasibility analysis for the use of robots in the construction industry.

    Seward, D. W. & Zied, K., 2003, Proceedings of the 20th international symposium on automation and robotics in construction. p. 399-405 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  85. Published

    Data interpretation from Leuze RotoScan sensor for robot localisation and environment mapping.

    Seward, D. W., Quayle, S. D., Kied, K. & Pace, C., 2002, Proceedings of the 19th international symposium on automation and robotics in construction.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  86. Published

    Teaching safety – issues of course design and delivery.

    Seward, D. W. & Joyce, M. J., 2001, Proceedings of a safety critical systems symposia.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  87. Published

    The use of simulation in the economic analysis of robotised construction tasks.

    Seward, D. W., Zied, K. & Riehl, J., 2001, Proceedings of the 18th international symposium on robotics in construction. p. 265-270 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  88. Published

    Safety analysis of autonomous excavator functionality.

    Seward, D. W., Pace, C., Morrey, R. & Sommerville, I., 10/2000, In: Reliability Engineering and System Safety. 70, 1, p. 29-39 11 p.

    Research output: Contribution to journalJournal article

  89. Published

    Global integration of construction automation and robotics.

    Seward, D. W., Quayle, S., Mure, N. & Scott, J., 1999, Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. Madrid, p. 11-16 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  90. Published

    The software development process for intelligent robots.

    Seward, D. W. & Garman, A., 04/1996, In: Computing and Control Engineering. 7, 2, p. 86-92 7 p.

    Research output: Contribution to journalJournal article

  91. Published

    The anatomy of a humanoid robot.

    Seward, D. W., Margrave, F. W. & Bradshaw, A., 1996, In: Robotica. 14, 4, p. 437-443 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  92. Published

    LUCIE the robot excavator - design for system safety.

    Seward, D. W., Margrave, F. W., Sommerville, I. & Morrey, R., 04/1996, Proceedings of the 1996 IEEE international conference on robotics and automation. Minneapolis: IEEE, Vol. 1. p. 936-968 33 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  93. Published

    System architectures and safety for mobile construction robots.

    Seward, D. W. & Quayle, S., 1996, Proceedings of the 13th international symposium on robotics in construction. Tokyo, Japan: Japan Robot Association (JARA), p. 727-732 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  94. Published

    The automation of piling rig positioning using satellite GPS.

    Seward, D. W., Ward, J., Findlay, J. & Kinniburgh, H., 1996, Proceedings of the 13th international symposium on robotics in construction. Tokyo, Japan: Japan Robot Association (JARA), p. 223-230 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  95. Published

    Precise on-site positioning of a piling rig.

    Seward, D. W., Ward, J., Findlay, J. & Kinniburgh, H., 1996, Proceedings of the Trimble 1996 surveying and mapping conference. California, p. 183-189 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  96. Published

    The automation of piling rig positioning using satellite GPS.

    Seward, D. W., Scott, J., Findlay, J. & Kinniburgh, H., 1997, In: Automation in Construction. 6, 3, p. 229-240 12 p.

    Research output: Contribution to journalJournal article

  97. Published

    LUCIE - Lancaster University computerised intelligent excavator.

    Seward, D. W. & Quayle, S., 1997, In: Circuit Cellar - The Magazine For Computer Applications. 79, p. 67-73 7 p.

    Research output: Contribution to journalJournal article

  98. Published

    Developing the safety case for large mobile robots.

    Seward, D. W., Quayle, S., Sommerville, I. & Morey, R., 1997, Advances in safety and reliability : proceedings of the ESREL '97 International Conference on Safety and Reliability, 17 - 20 June 1997, Lisbon, Portugal. Soares, C. G. (ed.). Oxford: Pergamon, p. 2293-2300 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  99. Published

    Safe systems for mobile robots: the safe-SAM project.

    Seward, D. W., Margrave, F. W., Sommerville, I. & Kotonyam, G., 1995, Proceedings of the 3rd safety-critical systems symposium published as directions in safety-critical systems. Brighton: Springer-Verlag, p. 153-170 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  100. Published

    Behaviours, models and the LUCIE robot excavator.

    Seward, D. W., 1994, Proceedings of an ALSB'94 workshop. Leeds

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  101. Published

    Hazard analysis techniques for mobile construction robots.

    Seward, D. W., Bradley, D. A. & Margrave, F. W., 1994, Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Chamberlain., D. A. (ed.). Amsterdam: Elsevier, p. 35-42 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  102. Published

    Designing a robot excavator - the decision making process.

    Seward, D. W., 1992, Mechatronics case studies. Mechatronics case studies

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  103. Published

    LUCIE - the autonomous excavator

    Seward, D., 1992, In: Industrial Robot: An International Journal. 19, 1, p. 14-18 5 p.

    Research output: Contribution to journalJournal article

  104. Published

    Robot excavator.

    Seward, D. W., 1992, IEE computing and control colloquium on telerobotically controlled mobil vehicles. London, p. 5/1-5/3

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  105. Published

    Robots in construction.

    Seward, D. W., 1992, In: Industrial Robot: An International Journal. 19, 3, p. 25-29 5 p.

    Research output: Contribution to journalJournal article

  106. Published

    Controlling an intelligent excavator for autonomous digging in difficult ground.

    Seward, D. W., Bradley, D. A., Mann, J. E. & Goodwin, M. R., 1992, 9th international symposium on automation and robotics in construction. Tokyo

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  107. Published

    Automating the construction workplace: positioning and navigational factors.

    Seward, D. W., 1/01/2002, In: Construction Innovation: Information, Process, Management. 2, 3, p. 167-189 23 p.

    Research output: Contribution to journalJournal articlepeer-review

  108. Published

    Graphical programming and the development of construction robots.

    Seward, D. W. & Zeid, K., 01/2004, In: Computer-Aided Civil and Infrastructure Engineering. 19, 1, p. 64-80 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  109. Published

    Safe and effective navigation of autonomous robots in hazardous environments.

    Seward, D. W., Agate, R. & Pace, C., 04/2007, In: Autonomous Robots. 22, 3, p. 223-242 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  110. Published

    Control architecture characteristics for intelligence in autonomous mobile construction robots.

    Seward, D., Agate, R. Y., Bakari, M. & Pace, C. M., 2006, Proceedings of the 24th international symposium on automation and robotics in construction.. p. 846-851 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  111. Published

    Emotions modelling for safe behaviour generation in robotic systems.

    Seward, D., Agate, R. Y. & Pace, C. M., 2006, Proceeding of the European safety and reliability conference (ESREL 2006).. p. 93-99 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  112. Published

    Implementation issues for safe behaviour in robotic systems.

    Seward, D. W., Pace, C. M. & Agate, R. Y., 2006, Proceeding of the European safety and reliability conference (ESREL 2006)..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  113. Published

    SME expectations and experiences

    Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  114. Published

    The Role of Elastic and Inelastic Electron Reflection in Multipactor Discharges.

    Seviour, R., 01/2005, In: IEEE Transactions on Electron Devices. 52, 8, p. 1927-1930 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  115. Published

    Multipactor Discharge.

    Seviour, R. & Carter, R., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  116. Published

    Identification of clouds and aurorae in optical data images

    Seviour, R., Kosch, M. & Honary, F., 17/01/2003, In: New Journal of Physics. 5, p. 6.1-6.7

    Research output: Contribution to journalJournal articlepeer-review

  117. Published

    Anomalous magnetoresistance of magnetic multlilayers.

    Seviour, R., Sanvito, S., Lambert, C. J. & Jefferson, J. H., 2000, In: Journal of Physics: Condensed Matter. 12, p. L621-L626

    Research output: Contribution to journalJournal articlepeer-review

  118. Published

    Hidden-sector photon and axion searches using photonic band gap structures

    Seviour, R., Bailey, I., Woollett, N. & Williams, P., 12/02/2014, In: Journal of Physics G: Nuclear and Particle Physics. 41, 3, 10 p., 035005.

    Research output: Contribution to journalJournal articlepeer-review

  119. Published

    Rapid manufacturing complex geometries for high-power microwave applications

    Seviour, R., Rennie, A. & Celik, H. K., 12/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  120. Published

    Design of the beam delivery system for the international linear collider

    Seryi, A., Amann, J., Arnold, R., Asiri, F., Bane, K., Bellomo, P., Doyle, E., Fasso, A., Jonghoon, K., Keller, L., Ko, K., Li, Z., Markiewicz, T., Maruyama, T., Moffeit, K., Molloy, S., Nosochkov, Y., Phinney, N., Raubenheimer, T., Seletskiy, S. & 81 others, Smith, S., Spencer, C., Tenenbaum, P., Walz, D., White, G., Woodley, M., Woods, M., Xiao, L., Anerella, M., Jain, A., Marone, A., Parker, B., Delferriere, O., Napoly, O., Payet, J., Uriot, D., Watson, N., Agapov, I., Baldy, J. L., Schulte, D., Burt, G., Dexter, A., Buesser, K., Lohmann, W., Bellantoni, L., Drozhdin, A., Kashikhin, V., Kuchler, V., Lackowski, T., Mokhov, N., Nakao, N., Peterson, T., Ross, M., Striganov, S., Tompkins, J., Wendt, M., Yang, X., Enomoto, A., Kuroda, S., Okugi, T., Sanami, T., Suetsugu, Y., Tauchi, T., Del Carmen Alabau, M., Bambade, P., Brossard, J., Dadoun, O., Burrows, P., Christian, G., Clarke, C., Constance, B., Dabiri Khah, H., Hartin, A., Perry, C., Swinson, C., Ferrari, A., Blair, G., Boogert, S., Carter, J., Angal-Kalinin, D., Beard, C., Densham, C., Fernandez-Hernando, L., Greenhalgh, J., Goudket, P., Jackson, F., Jones, J., Kalinin, A., Ma, L., McIntosh, P., Yamamoto, H., Mattison, T., Carwardine, J., Saunders, C., Appleby, R., Torrence, E., Gronberg, J., Sanuki, T., Iwashita, Y., Telnov, V. & Warner, D., 1/12/2007, Proceedings of the IEEE Particle Accelerator Conference, PAC07. IEEE, p. 1985-1987 3 p. 4441135. (Proceedings of the IEEE Particle Accelerator Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  121. Published

    Analysis of excitation of the 630.0 nm airglow during a heating experiment in Troms on February 16, 1999

    Sergienko, T., Gustavsson, B., Steen, AA., Brändström, U., Rietveld, M., Leyser, T. B. & Honary, F., 2000, In: Physics and Chemistry of the Earth Part B: Hydrology, Oceans and Atmosphere. 25, 5-6, p. 531-535 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  122. Published

    Simultaneous THEMIS observations in the near-tail portion of the inner and outer plasma sheet flux tubes at substorm onset

    Sergeev, V. A., Apatenkov, S. V., Angelopoulos, V., McFadden, J. P., Larson, D., Bonnell, J. W., Kuznetsova, M., Partamies, N. & Honary, F., 19/11/2008, In: Journal of Geophysical Research. 113, p. A00C02

    Research output: Contribution to journalJournal articlepeer-review

  123. Published

    High-frequency magnetospheric sounding at EISCAT: Some trials and their implications

    Senior, A., Honary, F., Chapman, P. J., Rietveld, M. T., Kelso, T. S. & Kosch, M. J., 14/08/2008, In: Radio Science. 43, RS4009, p. 1-13 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  124. Published

    Comparison of methods to determine auroral ionospheric conductances using ground-based optical and riometer data

    Senior, A., Kosch, M. J. & Honary, F., 2008, In: Annales Geophysicae. 26, 12, p. 3831-3840 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  125. Published

    Estimating the field-parallel scale length of artificial F-region striations by means of HF radar backscatter

    Senior, A., Kosch, M. J., Borisov, N. D., Yeoman, T. K., Rietveld, M. T. & Honary, F., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  126. Published

    Measurements and modeling of cosmic noise absorption changes due to radio heating of the D region ionosphere

    Senior, A., Rietveld, M. T., Honary, F., Singer, W. & Kosch, M. J., 14/04/2011, In: Journal of Geophysical Research. 116, A04310, p. 1-10 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  127. Published

    Statistical relationships between cosmic radio noise absorption and ionospheric electrical conductances in the auroral zone

    Senior, A., Kavanagh, A. J., Kosch, M. J. & Honary, F., 2007, In: Journal of Geophysical Research. 112, p. A11301

    Research output: Contribution to journalJournal articlepeer-review

  128. Published

    Observations of the spatial structure of electron precipitation pulsations using an imaging riometer

    Senior, A. & Honary, F., 04/2003, In: Annales Geophysicae. 21, 4, p. 997-1003 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  129. Published

    Multi-frequency HF radar measurements of artificial F-region field-aligned irregularities

    Senior, A., Borisov, N. D., Kosch, M. J., Yeoman, T. K., Honary, F. & Rietveld, M. T., 11/2004, In: Annales Geophysicae. 22, 10, p. 3503-3511 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  130. Published

    ITG modes in the presence of inhomogeneous field-aligned flow

    Sen, S., McCarthy, D. R., Lontano, M., Lazzaro, E. & Honary, F., 02/2010, In: Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology. 165, 2, p. 180-186 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  131. Published

    Rayleigh Taylor instability in a dusty plasma

    Sen, S., Fukuyama, A. & Honary, F., 08/2010, In: Journal of Atmospheric and Solar-Terrestrial Physics. 72, 13, p. 938-942 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  132. Published

    Case study on Resource Recovery: linking renewable energy, waste management and sustainable agriculture

    Semple, K., Marshall, R., Lag Brotons, A., Herbert, B. & Hurst, L., 12/2018, From waste to resource productivity: Evidence and case studies. p. 39-50 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  133. Unpublished

    Additive manufacturing in assistive product design development

    Sembiring, E., Rennie, A. & Laha, S., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  134. Published

    Construction issues surrounding a portable four-band neutron detection system.

    Selwood, M. J. & Monk, S. D., 03/2011, In: Radiation Protection Dosimetry. 144, 1-4, p. 249-252 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  135. Published

    Development of a portable isotropic neutron spectrometer

    Selwood, M. J. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1145-1149 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  136. Published

    Evolution of a neutron detector for the purpose of portability and resolvability

    Selwood, M. & Monk, S., 11/07/2012, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 680, p. 18-26 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  137. Published

    Improved Design of Photonic Crystal Based Multiplexer/Demultiplexer Devices

    Selim, R., Pinto, D. & Obayya, S., 2010, In: IET Optoelectronics. 4, 4, p. 165-173 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  138. Published

    Complex Envelope Alternating Direction Implicit Finite Difference Time Domain Analysis Of Ultra-Fast Photonic Bandgap Switches

    Selim, R., Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  139. Published

    Analysis of New Ultra-Fast PhC MUX/DEMUX

    Selim, R., Pinto, D. & Obayya, S., 2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  140. Published

    Analysis of a 3x1 Demultiplexer PhC Using CE-ADI-FDTD

    Selim, R., Pinto, D. & Obayya, S., 2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  141. Published

    Terahertz Ultra Fast Switching Device Based Photonic Crystals

    Selim, R., Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  142. Published

    Terahertz Ring Resonator Based Photonic Crystals

    Selim, R., Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  143. Published

    The development of an interactive simulation of site information technology systems in relation to construction automation.

    Scott, J., Bradley, D. A., Seward, D. W., Adelson, R. M. & Pengelly, M., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 154-165 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  144. Published

    Issues in the development of data flow simulation of construction sites: the pursuit of quality.

    Scott, J., Bradley, D. A., Adelson, R., Pengelly, M. & Seward, D. W., 1995, In: International Journal of Project Management. 13, 5, p. 335-339 5 p.

    Research output: Contribution to journalJournal article

  145. Published

    IT in support of construction site automation and robotics.

    Scott, J. N., Bradley, D. A., Adelson, R. M., Pengelly, M. & Seward, D. W., 1994, Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Chamberlain, D. A. (ed.). Amsterdam: Elsevier, p. 531-538 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  146. Published

    The influence of magma ocean on the lunar global stress field due to tidal interaction between the Earth and Moon.

    Scott, R. S. & Wilson, L., 2004, In: Lunar and Planetary Science Conference Abstracts. XXXV(1, p. CD-ROM

    Research output: Contribution to journalJournal articlepeer-review

  147. Published

    The influence of tidal, despinning, and magma ocean cooling stresses on the magnitude and orientation of the Moon's early global stress field.

    Scott, R. S. & Wilson, L., 2004, In: Lunar and Planetary Science Conference Abstracts. XXXV(1, p. CD-ROM

    Research output: Contribution to journalJournal articlepeer-review

  148. Published

    The wear of metal-on-metal total hip prostheses measured in a hip simulator.

    Scholes, S. C., Green, S. M. & Unsworth, A., 06/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 6, p. 523-530 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  149. Published

    The friction and lubrication of alumina-on-alumina total hip prostheses - The effect of radial clearance and wear testing.

    Scholes, S. C., Green, S. M. & Unsworth, A., 2001, In: Key Engineering Materials. 218-220, p. 535-540 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  150. Published

    Nanotribological characterisation of alumina femoral heads using an atomic force microscope

    Scholes, S. C., Green, S. M. & Unsworth, A., 2002, In: Key Engineering Materials. 218-220, p. 543-548 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  151. Published

    THE WEAR OF ALUMINA-ON-ALUMINA TOTAL HIP PROSTHESES

    Scholes, S. C., Green, S. M. & Unsworth, A., 1/04/2004, In: Journal of Bone and Joint Surgery, British Volume. 86-B, SUPP IV, p. 403 1 p.

    Research output: Contribution to journalMeeting abstractpeer-review

  152. Published

    Complex electronic implants and polymer packaging needs

    Schoenleber, M., Vaghela, J., Ismail, F., Grahn, M., Popa, C., Rehman, I., Vadgama, P., T.S., S. (ed.) & S.I., K. (ed.), 2007, p. 703-706. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  153. Published

    FEA analysis and modelling of thermal stress in SOFCs

    Schlegl, H. & Dawson, R. J., 5/07/2016, Proceedings of 12th European SOFC & SOE Forum 2016: Modelling, validation and optimisation: Cell & stack. p. 109-119 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  154. Published

    Finite element analysis and modelling of thermal stress in solid oxide fuel cells

    Schlegl, H. & Dawson, R. J., 1/11/2017, In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 231, 7, p. 654-665 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  155. Published

    Thermal stress and strain in flat tubular SOFCs: FEA simulation and optical validation

    Schlegl, H., Hong, J-E., Kim, K-H., Park, S-T., Song, R-H. & Dawson, R. J., 3/07/2018, Proceedings of the 13th European SOFC & SOE Forum 2018.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  156. Published

    A selective uranium extraction agent prepared by polymer imprinting.

    Saunders, G. D., Walton, P. H., Joyce, M. J. & Port, S. N., 2000, In: Chemical Communications. 4, p. 273-274 2 p.

    Research output: Contribution to journalJournal article

  157. Published

    Very low field electron emission from hot filament CVD grown microcrystalline diamond

    Satyanarayana, B. S., Peng, X. L., Adamopoulos, G., Robertson, J., Milne, W. I. & Clyne, T. W., 2000, In: MRS Online Proceedings Library. 621, p. Q531-Q537

    Research output: Contribution to journalJournal articlepeer-review

  158. Published

    Very low field emission from HFCVD grown micro-crystalline diamong

    Satyanarayana, B. S., Peng, X. L., Adamopoulos, G., Robertson, J., Milne, W. I. & Clyne, T. W., 2000, Materials Research Society.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  159. Published

    An event-triggered coincidence algorithm for fast-neutron multiplicity assay corrected for cross-talk and photon breakthrough

    Sarwar, R., Astromskas, V., Zimmerman, C. H., Nutter, G., Simone, A. T., Croft, S. & Joyce, M. J., 21/09/2018, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 903, p. 152-161 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  160. Published
  161. Published

    Some aspects of neptunium acetohydroxamic acid chemistry under acidic conditions

    Sarsfield, M. J., Taylor, R. J., Boxall, C., Adrieux, F. & Sims, H. E., 2009, In: Radiochimica Acta. 97, 4-5, p. 219-222 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  162. Published

    Effect of dc voltage pulsing on high-vacuum electrical breakdowns near Cu surfaces

    Saressalo, A., Profatilova, I., Millar, W. L., Kyritsakis, A., Calatroni, S., Wuensch, W. & Djurabekova, F., 9/11/2020, In: Physical Review Accelerators and Beams. 23, 11, 14 p., 113101.

    Research output: Contribution to journalJournal articlepeer-review

  163. Published

    Assessing the sensitivity of stall-regulated wind turbine power to blade design using high-fidelity computational fluid dynamics

    Sanvito, A., Persico, G. & Campobasso, S., 31/10/2019, In: Journal of Engineering for Gas Turbines and Power. 141, 10, 11 p., 101022.

    Research output: Contribution to journalJournal articlepeer-review

  164. Published

    Assessing the sensitivity of stall-regulated wind turbine power to blade design using high-fidelity CFD

    Sanvito, A., Persico, G. & Campobasso, S., 2019, ASME Turbo Expo Conference. The American Society of Mechanical Engineers, GT2019-90956

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  165. Published

    Anisotropic thermal conductivity in Li2TiO3 ceramic breeder materials

    Sanjeev, M., Gilbert, M. & Murphy, S., 30/09/2021, In: Fusion Engineering and Design. 170, 8 p., 112710.

    Research output: Contribution to journalJournal articlepeer-review

  166. Published

    Design of a high-gain silicon BJT and an E- pHEMT hybrid matrix amplifier with an optimum filter-matching technique

    Sangaran, P., Narendra, K. & Paoloni, C., 2/10/2019, In: IET Microwaves, Antennas and Propagation. 13, 12, p. 2153 – 2158 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  167. Published

    Characterisation of the geometrical and kinematical influences of a 5-axis machining cell on the quality of the laser structuring process

    Sandmann, S. & Quayle, S., 15/06/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  168. Published

    Experimental study on properties of hybrid stable & surfactant-free nanofluids GNPs/CNCs (Graphene nanoplatelets/cellulose nanocrystal) in water/ethylene glycol mixture for heat transfer application

    Sandhya, M., Ramasamy, D., Kadirgama, K., Harun, W. S. W. & Saidur, R., 28/02/2022, In: Journal of Molecular Liquids. 348, 10 p., 118019.

    Research output: Contribution to journalJournal articlepeer-review

  169. Published

    On the production and properties of novel particulate NiTip/AA2124 metal matrix composites

    San Martín, D., Risanti, D. D., Garcés, G., Rivera-Diaz-del-Castillo, P. E. J. & van der Zwaag, S., 25/11/2009, In: Materials Science and Engineering: A. 526, 1-2, p. 250-252 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  170. Published

    Isothermal martensitic transformation in a 12Cr-9Ni-4Mo-2Cu stainless steel in applied magnetic fields

    San Martín, D., Aarts, K. W. P., Rivera-Díaz-del-Castillo, P. E. J., van Dijk, N. H., Brück, E. & van der Zwaag, S., 05/2008, In: Journal of Magnetism and Magnetic Materials. 320, 10, p. 1722-1728 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  171. Published

    In situ study of austenite formation by dilatometry in a low carbon microalloyed steel

    San Martín, D., Rivera-Díaz-del-Castillo, P. E. J. & García-de-Andrés, C., 05/2008, In: Scripta Materialia. 58, 10, p. 926-929 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  172. Published

    A new etching route for revealing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, P. E. J., Peekstok, E. & van der Zwaag, S., 05/2007, In: Materials Characterization. 58, 5, p. 455-460 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  173. Published

    Compression of Frequency-Modulated Pulses using Helically Corrugated Waveguides and Its Potential for Generating Multigigawatt rf Radiation

    Samsonov, S. V., Phelps, A. D. R., Bratman, V. L., Burt, G., Denisov, G. G., Cross, A. W., Ronald, K., He, W. & Yin, H., 2004, In: Physical review letters. 92, 11, p. 118301 -118301

    Research output: Contribution to journalJournal articlepeer-review

  174. Published

    Fabrication of dual drug loaded bilayered chitosan based composite scaffolds as osteochondral substitutes and evaluation of in vitro cell response using the MC3T3 pre-osteoblast cell line

    Samie, M., Yameen, M. A., Ikram, H. F., Iqbal, H., Chaudhry, A. A., ur Rehman, I. & Khan, A. F., 31/03/2020, In: Cellulose. 27, p. 2253-2266 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  175. Published

    Investigation of energy saving potentials in T-junction and elbow in compressed air systems

    Sambandam, M. T., Madlool, N. A., Rahman, S., Devaraj, D. & Rajakarunakaran, S., 10/2017, In: Energy Efficiency. 10, 5, p. 1099-1113 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  176. Published

    Experimental and Self-Consistent Modeling Study of De-twinning in a Twinning-Induced Plasticity Steel

    Saleh, A. A., Wen, W., Pereloma, E. V., McCormack, S. J., Tomé, C. N. & Gazder, A. A., 1/04/2019, In: JOM. 71, 4, p. 1396-1403 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  177. Published

    Current state and perspectives on transesterification of triglycerides for biodiesel production

    Salaheldeen, M., Mariod, A. A., Aroua, M. K., Rahman, S. M. A., Soudagar, M. E. M. & Fattah, I. M. R., 18/09/2021, In: Catalysts. 11, 9, 37 p., 1121.

    Research output: Contribution to journalJournal articlepeer-review

  178. Published

    Crosslinked thermoelectric hydro-ionogels: A new class of highly conductive thermoelectric materials

    Sajid, I. H., Sabri, M. F. M., Said, S. M., Salleh, M. F. M., Ghazali, N. N. N., Saidur, R., Subramaniam, B., Hasan, S. W. & Jaffery, H. A., 15/10/2019, In: Energy Conversion and Management. 198, 9 p., 111813.

    Research output: Contribution to journalJournal articlepeer-review

  179. Published

    Implications of beam filling patterns on the design of recirculating Energy Recovery Linacs

    Saitiniyazi, S., Apsimon, R. & Williams, P., 17/07/2020, In: Physical Review Accelerators and Beams. 23, 7, 17 p., 072002.

    Research output: Contribution to journalJournal articlepeer-review

  180. Published

    Filling Pattern Dependence of Regenerative Beam Breakup Instability in Energy Recovery Linacs

    Saitiniyazi, S., Apsimon, R. & Williams, P., 23/06/2021, In: Physical Review Accelerators and Beams. 24, 6, p. 1-10 10 p., 061003.

    Research output: Contribution to journalJournal articlepeer-review

  181. Published

    Pushing the Capture Limit of Thermionic Gun Linacs

    Saitiniyazi, S., Castilla Loeza, A., McKenzie, J., Apsimon, R., Militsyn, B., Angal-Kalinin, D. & Burt, G., 16/08/2021, In: Physical Review Accelerators and Beams. 24, 8, 12 p., 080401.

    Research output: Contribution to journalJournal articlepeer-review

  182. Published

    Health monitoring of aircraft wiring by acoustic method

    Saha, S., Xu, Z., Koltsov, D., Richardson, A. & Sutherland, A., 2009, 2009 IEEE AEROSPACE CONFERENCE, VOLS 1-7. NEW YORK: IEEE, p. 3744-3753 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  183. Published

    A continuous process for the liquid phase epoxidation of an olefinic compound

    Saha, B., Ambroziak, K., Sherrington, DC. & Mbeleck, R., 17/04/2018, Patent No. Indian Patent No.: 295846

    Research output: Patent

  184. Published

    Carbon dioxide utilization by graphene based nanocomposite materials as catalysts

    Saha, B., 22/03/2017, International Conference on Nanotechnology Applications: Chemical, Energy and Environment (NACEE-2017).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  185. Published

    A permeable particle container

    Saha, B., Ambroziak, K., Sherrington, DC. & Mbeleck, R., 7/12/2016, Patent No. Chinese Patent No.: ZL 201410840925.7

    Research output: Patent

  186. Published

    A continuous-flow apprach to alkene epoxidation catalysed by Polystyrene 2-(Aminomethyl)Pyridine supported Mo(VI) complex

    Saha, B., Mohammed, ML. & Mbeleck, R., 19/06/2016, 5th International Conference on Green Process Engineering (GPE 2016). Berruti, F. & Briens, C. (eds.). (An ECI Conference Series; vol. 16AG).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  187. Published

    Greener and Sustainable Alkene Epoxidation Process

    Saha, B., Mohammed, ML. & Mbeleck, R., 8/11/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  188. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys

    Safdar, S., Pinkerton, A. J., Li, L., Sheikh, M. & Withers, P., 1/02/2013, In: Applied Mathematical Modelling. 37, 3, p. 1187-1195 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  189. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools

    Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  190. Published

    Geomagnetic disturbances on ground associated with particle precipitation during SC

    Safargaleev, V., Kozlovsky, A., Honary, F., Voronin, A. & Turunen, T., 22/01/2010, In: Annales Geophysicae. 28, 1, p. 247-265 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  191. Published

    Event-Triggered Based State Estimation for Autonomous Operation of an Aerial Robotic Vehicle

    Sadeghzadeh Nokhodberiz, N., Nemati, H. & Montazeri, A., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2348-2353 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  192. Published

    Dynamics-Based Modified Fast Simultaneous Localisation and Mapping for Unmanned Aerial Vehicles with Joint Inertial Sensor Bias and Drift Estimation

    Sadeghzadeh Nokhodberiz, N., Can, A., Stolkin, R. & Montazeri, A., 24/08/2021, In: IEEE Access. 9, p. 120247-120260 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  193. Published

    Modification of polyethylene glycol with choline chloride and evaluation of the CO2 absorption capacity of their aqueous solutions

    Sadeghpour, M., Yusoff, R., Aroua, M. K. & Tabandeh, M., 1/04/2018, In: Greenhouse Gases: Science and Technology. 8, 2, p. 324-334 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  194. Published

    Structural Vibration Control Using Novel Adaptive Tuned Mass Inertance Damper (ATMID) with Adjustable Inertance

    Sadeghian, M. A., Yang, J., Wang, F. & Wang, X., 15/04/2022, In: Applied Sciences. 12, 8, 17 p., e4028.

    Research output: Contribution to journalJournal articlepeer-review

  195. Published

    A modified proportional guidance law for homming missiles by using of nonlinear filters

    Sadeghi, H., Poshtan, J. & Montazeri, A., 2008, Mechatronics and Its Applications, 2008. ISMA 2008. 5th International Symposium on. New York: IEEE, p. 350-355 6 p. (International Symposium on Mechatronics and its Applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  196. Published

    Defect prevention in selective laser melting components: Compositional and process effects

    Sabzi, H. E. & Rivera-Díaz-del-Castillo, P. E. J., 18/11/2019, In: Materials. 12, 22, 15 p., 3791.

    Research output: Contribution to journalJournal articlepeer-review

  197. Published

    Controlling crack formation and porosity in laser powder bed fusion: Alloy design and process optimisation

    Sabzi, H. E., Maeng, S., Liang, X., Simonelli, M., Aboulkhair, N. T. & Rivera-Díaz-del-Castillo, P. E. J., 1/08/2020, In: Additive Manufacturing. 34, 14 p., 101360.

    Research output: Contribution to journalJournal articlepeer-review

  198. Published

    Grain refinement in laser powder bed fusion: The influence of dynamic recrystallization and recovery

    Sabzi, H. E., Aboulkhair, N. T., Liang, X., Li, X. H., Simonelli, M., Fu, H. & Rivera-Díaz-del-Castillo, P. E. J., 30/11/2020, In: Materials and Design. 196, 10 p., 109181.

    Research output: Contribution to journalJournal articlepeer-review

  199. Published

    Deformation twinning-induced dynamic recrystallization during laser powder bed fusion

    Sabzi, H. E., Li, X-H., Zhang, C., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/01/2022, In: Scripta Materialia. 207, 114307.

    Research output: Contribution to journalJournal articlepeer-review

  200. Published

    Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering

    Sabzi, H. E., Hernandez-Nava, E., Li, X-H., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/12/2021, In: Materials and Design. 212, 17 p., 110246.

    Research output: Contribution to journalJournal articlepeer-review

  201. Published

    Synthesis and characterization of cellulose/hydroxyapatite based dental restorative composites

    Sabir, M., Ali, A., Siddiqui, U., Muhammad, N., Khan, A. S., Sharif, F., Iqbal, F., Shah, A. T., Rahim, A. & Rehman, I. U., 21/09/2020, In: Journal of Biomaterials Science, Polymer Edition. 31, 14, p. 1806-1819 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  202. Published

    UV-LIGA Microfabrication of 0.3 THz Double Corrugated Waveguide

    Sabaawi, A., Doychinov, V., Mathisen, S., David Paul, S., Letizia, R. & Paoloni, C., 9/02/2018, IVEC 2017 - 18th International Vacuum Electronics Conference. IEEE, 2 p. (IVEC 2017 - 18th International Vacuum Electronics Conference; vol. 2018-January).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  203. Published

    Assessing the environmental performance of NADH regeneration methods: A cleaner process using recyclable Pt/Fe3O4 and hydrogen

    Saba, T., Burnett, J. W. H., Li, J., Wang, X., Anderson, J. A., Kechagiopoulos, P. N. & Wang, X., 1/01/2020, In: Catalysis Today. 339, p. 281–288 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  204. Published

    A facile analytical method for reliable selectivity examination in cofactor NADH regeneration

    Saba, T., Burnett, J. W. H., Li, J., Kechagiopoulos, P. N. & Wang, X., 25/01/2020, In: Chemical Communications. 56, 8, p. 1231-1234 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  205. Published

    NADH regeneration: a case study of Pt-catalyzed NAD+ reduction with H2

    Saba, T., Li, J., Burnett, J. W. H., Howe, R. F., Kechagiopoulos, P. N. & Wang, X., 1/01/2021, In: ACS Catalysis. 11, 1, p. 283–289 7 p.

    Research output: Contribution to journalLetterpeer-review

  206. Published

    Graphene/fly ash geopolymeric composites as self-sensing structural materials

    Saafi, M., Tang, L., Fung, J., Rahman, M., Sillars, F., Liggat, J. & Zhou, X., 2014, In: Smart Materials and Structures. 23, 6, 10 p., 065006.

    Research output: Contribution to journalJournal articlepeer-review

  207. Published

    Enhanced properties of graphene/fly ash geopolymeric composite cement

    Saafi, M., Tang, L., Fung, J., Rahman, M. & Liggat, J., 01/2015, In: Cement and Concrete Research. 67, p. 292-299 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  208. Published

    Hybrid graphene/geopolymeric cement as a superionic conductor for structural health monitoring applications

    Saafi, M. B. S., Piukovics, G. & Ye, J., 20/09/2016, In: Smart Materials and Structures. 25, 10, 11 p., 105018.

    Research output: Contribution to journalJournal articlepeer-review

  209. Published

    Inherently multifunctional geopolymeric cementitious composite as electrical energy storage and self-sensing structural material

    Saafi, M. B. S., Gullane, A., Huang, B., Sadeghi, H., Ye, J. & Sadeghi, F., 1/10/2018, In: Composite Structures. 201, p. 766-778 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  210. Published

    Greener synthesis of dimethyl carbonate using a novel tin-zirconia/graphene nanocomposite catalyst

    Saada, R., Aboelazayem, O., SUELA, KELLICI., Heil, T., Morgan, D., Lampronti, G. & Saha, B., 15/06/2018, In: Applied Catalysis B: Environmental. 226, p. 451-462 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  211. Published

    SpaciMS: spatial and temporal operando resolution of reactions within catalytic monoliths

    Sá, J., Fernandes, D. L. A., Aiouache, F., Goguet, A., Hardacre, C., Lundie, D., Naeem, W., Partridge, W. P. & Stere, C., 2010, In: Analyst. 135, 9, p. 2260-2272 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  212. Published

    The monitoring of pile construction to assess integrity and load carrying capacity of CFA piles.

    Rust, M., Clayton, C., Mure, N., Scott, J., Seward, D. & Quayle, S., 2004, p. 1565-1569. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  213. Published

    High-pressure phase behaviour of nicotine / carbon dioxide system

    Ruiz-Rodríguez, A., Najdanovic-Visak, V. & Nunes da Ponte, M., 2008.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  214. Published

    High-pressure phase behaviour of binary (CO2 + nicotine) and ternary (CO2 + nicotine plus solanesol) mixtures

    Ruiz-Rodriguez, A., Najdanovic, V., Visak, Z. P., Bronze, M. D. R., Antunes, C. & da Ponte, M. N., 15/08/2009, In: Fluid Phase Equilibria. 282, 1, p. 58-64 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  215. Published

    Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids

    Rubbi, F., Habib, K., Saidur, R., Aslfattahi, N., Yahya, S. M. & Das, L., 15/09/2020, In: Solar Energy. 208, p. 124-138 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  216. Published

    State-of-the-art review on water-based nanofluids for low temperature solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Rahman, M. T., 15/09/2021, In: Solar Energy Materials and Solar Cells. 230, 40 p., 111220.

    Research output: Contribution to journalJournal articlepeer-review

  217. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to journalJournal articlepeer-review

  218. Published

    Vitamin D and peak bone mass in UK South Asian women

    Roy, D. K., Berry, J. L., Adams, J. E., Swarbrick, C. M., King, Y., Pye, S. R., Silman, A. J. & O', N. T. W., 2004, In: Osteoporosis International. 15, Supplement 2, p. S9 1 p.

    Research output: Contribution to journalJournal articlepeer-review

  219. Published

    Modelling techniques for reliability prediction in MEMS technologies.

    Rosing, R. & Richardson, A. M. D., 2003, Proceedings of the Nanotech 2003 conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  220. Published

    Generation of component level fault models for MEMS.

    Rosing, R., Reichenbach, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of the 7th international mixed-signal testing workshop (IMSTW ’01). p. 40-45 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  221. Published

    Fault simulation and modelling of microelectromechanical systems.

    Rosing, R., Lechner, A., Richardson, A. M. D. & Dorey, A. P., 2000, In: IEE Journal on Computing and Control Engineering. 11, 5, p. 242-250 9 p.

    Research output: Contribution to journalJournal article

  222. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  223. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  224. Published

    Fault simulation for MEMS

    Rosing, R., Richardson, A., Dorey, A. & Peyton, A., 1/06/1999, Intelligent and Self-Validating Sensors (Ref. No. 1999/160), IEE Colloquium on. p. 7/1 -7/6

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  225. Published

    Generation of component level fault models for MEMS

    Rosing, R., Reichenbach, R. & Richardson, A., 2002, In: Microelectronics Journal. 33, 10, p. 861-868 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  226. Published

    Clock switching: a new design for current test (DcT) method for dynamic logic circuits

    Rosing, R., Richardson, A. M. D., Kerkhoff, A. & Acosta, A., 1998, IDDQ Testing, 1998. Proceedings. 1998 IEEE International Workshop on. IEEE, p. 20-25 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  227. Published

    Generation of MEMS component models using Cosserat symbolic simulations

    Rosing, R., Wang, C., Tucker, R., Richardson, A. & De Masi, B., 2002, SPIE Proceedings: design, test, integration, and packaging of MEMS/MOEMS 2002. Vol. 4755. p. 149-154 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  228. Published

    Accurate vehicular positioning using a DAB-GSM hybrid system

    Rooney, S., Chippendale, P., Choony, R., Roux, C. L. & Honary, B., 05/2000, Vehicular Technology Conference Proceedings, 2000. VTC 2000-Spring Tokyo. 2000 IEEE 51st. Tokyo, Japan: IEEE, p. 97-101 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  229. Published

    Polyurethane membranes modified with isopropyl myristate as a potential candidate for encapsulating electronic implants: A study of biocompatibility and water permeability

    Roohpour, N., Wasikiewicz, J. M., Moshaverinia, A., Paul, D., Grahn, M. F., Rehman, I. U. & Vadgama, P., 2010, In: Polymers. 2, 3, p. 102-119 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  230. Published

    Isopropyl myristate-modified polyether-urethane coatings as protective barriers for implantable medical devices

    Roohpour, N., Wasikiewicz, J. M., Moshaverinia, A., Paul, D., Rehman, I. U. & Vadgama, P., 2009, In: Materials. 2, 3, p. 719-733 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  231. Published

    Synthesis and characterisation of enhanced barrier polyurethane for encapsulation of implantable medical devices

    Roohpour, N., Wasikiewicz, J. M., Paul, D., Vadgama, P. & Rehman, I. U., 2009, In: Journal of Materials Science: Materials in Medicine. 20, 9, p. 1803-1814 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  232. Published

    Polarization-induced Fano resonances using wire-grid metasurfaces for the THz region: Metamaterials, Metadevices, and Metasystems 2020

    Romain, X., Degl'Innocenti, R., Baida, F. I., Boyer, P., N., E. (ed.), M.A., N. (ed.), N.I., Z. (ed.) & (SPIE), T. S. O. P-O. I. E., 20/08/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  233. Published

    Tunable Polarization-Induced Fano Resonances in Stacked Wire-Grid Metasurfaces

    Romain, X., Degl'Innocenti, R., Baida, F. I. & Boyer, P., 3/06/2021, In: Communications Physics. 4, 5 p., 115.

    Research output: Contribution to journalJournal articlepeer-review

  234. Published

    Foam formation in low expansion fire fighting equipment

    Rogers, L., 2001, Lancaster University. 210 p.

    Research output: ThesisDoctoral Thesis

  235. Published

    Foam formation in low expansion fire fighting equipment.

    Roger, L. E., Widden, M. B. & Osborne, M. J., 2000, Proceedings of the Eurofoam 2000 conference. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  236. Published

    RF heating in a strong auroral electrojet

    Robinson, T. R., Bond, G., Eglitis, P., Honary, F. & Rietveld, M. T., 1998, In: Advances in Space Research. 21, 5, p. 689-692 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  237. Published

    A Resonance Broadening Kinetic Theory of the Modified-two-stream Instability: Implications for Radar Auroral Backscatter Experiments

    Robinson, T. R. & Honary, F., 1/02/1990, In: Journal of Geophysical Research. 95, A2, p. 1073-1085 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  238. Published

    Adiabatic and Isothermal Ion-acoustic Speeds of Stable Farley-Buneman Waves in the Auroral E Region

    Robinson, T. R. & Honary, F., 1993, In: Journal of Atmospheric and Terrestrial Physics. 55, 1, p. 65-77 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  239. Published

    First EISCAT observations of the modification of F-region electron temperatures during RF heating at harmonics of the electron gyro frequency

    Robinson, T. R., Honary, F., Stocker, A. J., Jones, T. B. & Stubbe, P., 3/01/1996, In: Journal of Atmospheric and Terrestrial Physics. 58, 1-4, p. 385-395 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  240. Published

    Factors influencing the heating of the auroral electrojet by high power radio waves

    Robinson, T. R., Honary, F., Stocker, A. & Jones, T. B., 1995, In: Advances in Space Research. 15, 12, p. 41-44 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  241. Published

    State-dependent system identification for control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D., Taylor, C. J. & Lokuciewski, C., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  242. Published

    Low-level joint control of a robotic manipulator using state-dependent parameter models

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  243. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  244. Published

    You talk – but what does it type.

    Roberts, P. E., Joyce, M. J. & Philpott, C., 23/02/2004, In: Speech and Language Therapy in Practice. p. 16-19 4 p.

    Research output: Contribution to journalJournal article

  245. Published

    Speech recognition software for dysarthric speakers.

    Roberts, P. & Joyce, M. J., 2003, Proceedings of the 5th European CPLOL congress.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  246. Published

    Understanding microstructural transitions occurring under rolling contact fatigue

    Rivera-Díaz-Del-Castillo, P. E. J., 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, Vol. STP 1580. p. 550-563 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  247. Published

    Computational design of nanostructured steels employing irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J., Hayashi, K. & Galindo-Nava, E. I., 10/2013, In: Materials Science and Technology (United Kingdom). 29, 10, p. 1206-1211 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  248. Published

    Dislocation annihilation in plastic deformation: I. Multiscale irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J. & Huang, M., 04/2012, In: Acta Materialia. 60, 6-7, p. 2606-2614 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  249. Published

    Precipitate coarsening in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J., 07/2002, In: Scripta Materialia. 47, 2, p. 113-117 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  250. Published

    Theory for growth of needle-shaped particles in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2002, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 33, 4, p. 1075-1081 7 p., 209.

    Research output: Contribution to journalJournal articlepeer-review

  251. Published

    Assuring microstructural homegeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 11/2004, In: Steel Research International. 75, 11, p. 711-715 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  252. Published

    Assurring microstructural homogeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 2004, Multiscaling in Applied Science and Emerging Technology; Fundamentals and Applications in Mesomechanics: Proceedings of the Sixth International Conference for Mesomechanics. Sih, G. C., Kermanidis, T. B. & Pantelakis, S. G. (eds.). p. 261-265 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  253. Published

    A model for ferrite/pearlite band formation and prevention in steels

    Rivera-Díaz-Del-Castillo, P. E. J., Sietsma, J. & Van Der Zwaag, S., 02/2004, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 35 A, 2, p. 425-433 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  254. Published

    Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera-Díaz-Del-Castillo, P. E. J., Reischig, P., Xu, W. & Van Der Zwaag, S., 11/2005, In: Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  255. Published

    Strengthening mechanisms in high-entropy alloys: Perspectives for alloy design

    Rivera-Díaz-Del-Castillo, P. E. J. & Fu, H., 14/10/2018, In: Journal of Materials Research. 33, 19, p. 2970-2982 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  256. Published

    Rolling contact fatigue in bearings: Phenomenology and modelling techniques

    Rivera-Díaz-del-Castillo, P. E. J., 2012, Bearing Steel Technologies, 9th Volume: Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies. ASTM International, Vol. 1548 STP. p. 355-381 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  257. Published

    On the origin of ultra-hardness in bearing steels: Two-step bainite transformation processes

    Rivera-Díaz-del-Castillo, P. E. J., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1094-1101 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  258. Published

    On the origin of ultra-hardness in bearing steels: Two-step bainite transformation processes

    Rivera-Díaz-del-Castillo, P. E. J., 2012, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'12, Materials Science and Technology 2012. p. 295-302 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  259. Published

    Genetic alloy design of ultra high strength stainless steels: From thermodynamics to quantum mechanics

    Rivera-Díaz-del-Castillo, P. E. J., Xu, W. & Van Der Zwaag, S., 2010, THERMEC 2009. 5 ed. Vol. 638-642. p. 3473-3478 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  260. Published

    Growth of needle and plate shaped particles: Theory for small supersaturations, maximum velocity hypothesis

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 25-29 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  261. Published

    Theory for growth of spherical precipitates with capillarity effects

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 30-32 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  262. Published

    Heat treatment and composition optimization of nanoprecipitation hardened alloys

    Rivera-Diaz-Del-Castillo, P. E. J. & Xu, W., 11/04/2011, In: Materials and Manufacturing Processes. 26, 3, p. 375-381 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  263. Published

    Tailoring dynamic recrystallization in Ni- and Fe-base high temperature alloys

    Rivera-Diaz-del-Castillo, P. & Galindo-Nava, E., 2013, Recrystallization and Grain Growth V. Vol. 753. p. 427-430 4 p. (Materials Science Forum; vol. 753).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  264. Published

    Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms

    Rivera-Diaz-del-Castillo, P. E. J., de Jong, M. & Sluiter, M. H. F., 20/04/2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. John Wiley and Sons Inc., Vol. 2. p. 477-484 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  265. Published

    A statistical mechanics theory of grain deformation and its prediction of dynamical recovery and recrystallization

    Rivera Díaz Del Castillo, P. E. J. & Van Der Zwaag, S., 2004, In: Materials Science Forum. 467-470, I, p. 87-92 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  266. Published

    Statistical mechanics prediction of solid-solid transformations induced by plastic deformation

    Rivera Díaz Del Castillo, P. E. J., Huang, M. & Van Der Zwaag, S., 2005, Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005. Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Vol. 1. p. 621-628 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  267. Published

    Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz Del Castillo, P. E. J., Reischig, P. & Van Der Zwaag, S., 04/2005, In: Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  268. Published

    Observed characteristics of sudden commencement absorption.

    Ritchie, S. E. & Honary, F., 04/2009, In: Journal of Atmospheric and Solar-Terrestrial Physics. 71, 5, p. 609-617 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  269. Published

    Storm sudden commencement and its effect on high-latitude HF communication links

    Ritchie, S. E. & Honary, F., 25/06/2009, In: Space Weather. 7, S06005, p. 1-20 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  270. Published

    Observations on the variability and screening effect of sporadic-E

    Ritchie, S. E. & Honary, F., 08/2009, In: Journal of Atmospheric and Solar-Terrestrial Physics. 71, 12, p. 1353-1364 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  271. Published

    Advances in ionospheric propagation modelling at high-latitudes

    Ritchie, S. E. & Honary, F., 28/04/2009, p. 32-38. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  272. Published

    Prediction of sudden commencement absorption

    Ritchie, S. E. & Honary, F., 04/2006, p. 113-116. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  273. Published

    A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, D. D., Yin, M., del Castillo, P. E. J. R. D. & van der Zwaag, S., 15/10/2009, In: Materials Science and Engineering: A. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  274. Published

    Strength-toughness optimisation scenarios through interrupted ageing in AA6061 and AA2024

    Risanti, D. D., Rivera-Díaz-del-Castillo, P. E. J. & Van Der Zwaag, S., 2008, Aluminum Alloys: Fabrication, Characterization and Applications - Proceedings of Symposia held during TMS 2008 Annual Meeting and Exhibition. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  275. Published

    Fault diagnosis in multi-machine power systems using the Derivative-free nonlinear Kalman Filter

    Rigatos, G., Siano, P., Wira, P. & Ma, X., 13/06/2016, Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016 IEEE Workshop on. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  276. Published

    An HF magnetospheric radar for EISCAT

    Rietveld, M. T., Honary, F., Robinson, T. R., Thide, B. & Stubbee, P., 1997, Proceedings of the 8th EISCAT international workshop. Leicester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  277. Published

    Hf-pump-induced parametric instabilities in the auroral E-region

    Rietveld, M. T., Isham, B., Grydeland, T., Hoz, C. L., Leyser, T. B., Honary, F., Ueda, H., Kosch, M. & Hagfors, T., 2002, In: Advances in Space Research. 29, 9, p. 1363-1368 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  278. Published

    Bringing Multi-Domain Functions to Intelligent Systems through MEMS Technology Platforms – The INTEGRAMplus Access Service.

    Richardson, A., Pickering, C., McNie, M., Reeves, C., Schropfer, G., Knapp, H. & Bosshard, C., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic). 4, p. 38-40 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  279. Published

    Design-for-testability for mixed signal and analogue design.

    Richardson, A. M. D. & Lechner, A., 2000, Proceedings of 7th international conference on mixed design of integrated circuits and systems. Poland

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  280. Published

    Design for testability strategies for mixed signal and analogue designs: from layout to system.

    Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  281. Published

    Reliability indicators.

    Richardson, A. M. D. & Dorey, A. P., 1992, Third European symposium of reliability of electron devices, failure, physics and analysis (ESREF). Schabisch Gmund, p. 277-285 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  282. Published

    Supply current monitoring in cmos circuits for reliability prediction and test.

    Richardson, A. M. D. & Dorey, A. P., 1992, In: Quality and Reliability Engineering International. 8, 6, p. 543-548 6 p.

    Research output: Contribution to journalJournal article

  283. Published

    System in Package Technology - Design for Manufacture Challenges.

    Richardson, A. M. D., Bailey, C., Dumas, N. & Yannou, J. M., 1/02/2007, In: Circuit World. 33, 1, p. 36-46 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  284. Published

    Sensor Testing Through Bias Superposition.

    Richardson, A. M. D., Bunyan, R., Mathias, H. & Nouet, P., 1/05/2007, In: Sensors and Actuators A: Physical. 136, 1, p. 441-455 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  285. Published

    A capacitance and optical method for the static and dynamic characterization of micro electro mechanical systems (MEMS) devices.

    Richardson, A. M. D., Ferraris, E., Fassi, I., De Masi, B. & Rosing, R., 1/09/2006, In: Microsystem Technologies. 12, 10-11, p. 1053-1061 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  286. Published

    Construction of Nonlinear Dynamic MEMS Component Models Using Cosserat Theory.

    Richardson, A., De Masi, B., Rosing, R. & Wang, C., 1/08/2004, In: Analog Integrated Circuits and Signal Processing. 40, 2, p. 117-130 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  287. Published

    INTEGRAMplus : a new European service project providing development platforms for integrated micro-nano technologies and products.

    Richardson, A. M. D., Pickering, C., McNie, M. & Reeves, C. L., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic).

    Research output: Contribution to journalJournal articlepeer-review

  288. Published

    MNT needs methodologies and software tools.

    Richardson, A. M. D., Solomon, P. & El-Fatatry, A., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic). 2, p. 16-35 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  289. Published

    Guest editorial.

    Richardson, A. M. D., Mir, S. & Cheng, T., 12/2006, In: Journal of Electronic Testing. 22, 4-6, p. 311

    Research output: Contribution to journalJournal articlepeer-review

  290. Published

    Editorial: Mixed signal & analogue IC test technology

    Richardson, A. & Dorey, T., 12/1996, In: IEE Proceedings - Circuits, Devices and Systems. 143, 6, p. 357-357 1 p.

    Research output: Contribution to journalEditorialpeer-review

  291. Published

    Fault-tolerant and self-testable architectures for zero failure electronics

    Richardson, A., Sharif, E. & Betts, W. R., 1997, AUTOMOTIVE ELECTRONICS - AUTOTECH'97. EDMUNDS: MECHANICAL ENGINEERING PUBL, p. 133-142 10 p. (IMechE seminar publication ; 1997-10).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  292. Published

    Design for Micro and Nano Manufacture; The "PATENT-DfMM Network of Excellence: Modelling and Simulation Cluster

    Richardson, A., Slattery, O. & Rencz, M., 1/04/2006, Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2006. EuroSime 2006. 7th International Conference on. p. 1 -5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  293. Published

    Integrated Test Support for Micro- Electro-Mechanical-Systems (MEMS)

    Richardson, A., Vermeiren, W., Straube, B. & Olbrich, T., 19/09/1996, p. 273. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  294. Published

    The application of IDDX test strategies in analogue and mixed signal IC's

    Richardson, A., Bratt, A., Baturone, I. & HUERTAS, J. L., 22/06/1995. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  295. Published

    Defect oriented test development based on inductive fault analysis

    Richardson, A., Kerkhoff, H. G. & Harvey, R., 22/06/1995, p. 2-11. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  296. Published

    An Integrated Diagnostic Reconfiguration (IDR) design approach for fault tolerant mixed signal integrated systems

    Richardson, A., Sharif, E. & Dorey, A., 11/06/1998, p. 88-90. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  297. Published

    Reconfiguration based built-in self-test for analogue front-end circuits

    Richardson, A., Lechner, A. & Hermes, B., 18/06/1999, p. 243-247. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  298. Published

    The application of neuMOS transistors to enhanced Built-in Self-Test (BIST) and product quality

    Richardson, A. & Nicholson, R., 18/06/1999, p. 257-261. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  299. Published

    Test support strategies for MEMS

    Richardson, A., Rosing, R., Peyton, A. & Dorey, A., 18/06/1999, p. 345-350. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  300. Published

    Reconfigurable circuits for fault tolerant systems: factors to consider

    Richardson, A., Jeffrey, C. & Lechner, A., 21/06/2002, p. 215-218. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  301. Published

    Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers

    Richardson, A., Tijou, J., Burbidge, M. & Vaid, V., 21/06/2002, p. 23-29. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  302. Published

    Testing high resolution SD ADC’s by using the noise transfer function

    Richardson, A. & De-Venuto, D., 26/05/2004. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  303. Published

    Test of A/D Converters

    Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  304. Published

    Phase Locked Loop Test Methodology

    Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  305. Published

    Delivering Bio-Mems & Microfluidic Education Around Accessible Technologies

    Richardson, A., Liu, H., Koltsov, D., Rosing, R., Ryan, T. & Wooton, R., 28/05/2008, Proceedings of the 8th European Workshop on Microelectronics Education. EDA Publishing, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  306. Published

    A Dependable Microelectronic Peptide Synthesizer Using Electrode Data

    Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.

    Research output: Contribution to journalJournal articlepeer-review

  307. Published

    Microsystems for structural health monitoring.

    Richardson, A., Van Heeren, H. & Neylon, S., 10/2008, European Commission.

    Research output: Book/Report/ProceedingsCommissioned report

  308. Published

    The economics of multi-axis wave energy converters

    Richardson, D. & Aggidis, G., 9/06/2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  309. Published

    Development of a multi frequency impedance measurement system for use in MEMS flow cytometers

    Richardson, A. M. D., Cole, N. & Abdul‑Hafiz, A., 12/2017, In: Microsystem Technologies. 23, 12, p. 5527-5543 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  310. Published

    Multi-axis point absorber wave energy converters

    Richardson, D., 2019, Lancaster University. 179 p.

    Research output: ThesisDoctoral Thesis

  311. E-pub ahead of print

    Self-Monitoring, Self-Healing Biomorphic Sensor Technology

    Richardson, A. & Cheneler, D., 3/10/2019, (E-pub ahead of print) 2019 IEEE 25th International Symposium on On-Line Testing and Robust System Design, IOLTS 2019. Gizopoulos, D., Alexandrescu, D., Papavramidou, P. & Maniatakos, M. (eds.). IEEE, p. 121-124 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  312. Published

    Designing Digital Materials with Volumetric Gradients

    Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  313. Published

    Phosphorus solubility changes following additions of bioenergy wastes to an agricultural soil: implications for crop availability and environmental mobility  

    Richards, S., Marshall, R., Lag Brotons, A., Semple, K. & Stutter, M., 1/11/2021, In: Geoderma. 401, 11 p., 115150.

    Research output: Contribution to journalJournal articlepeer-review

  314. Published

    Field emission vacuum triode: THz waveguide solutions for the transmission lines

    Riccitelli, R., Brunetti, F., Paoloni, C., Ulisse, G., Di Carlo, A. & Krozer, V., 2008, 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 379-380 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  315. Published

    Innovative design of nano-vacuum triode

    Riccitelli, R., Brunetti, F., Petrolati, E., Paoloni, C., Di Carlo, A., Toschi, F., Terranova, M. L. & Cirillo, M., 2007, EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, p. 323-324 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  316. Published

    Innovative vacuum device flip-cathode based on carbon nanotubes field emitters

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G., Di Carlo, A., sessa, V., Terranova, M. L., Cirillo, M. & Orlanducci, S., 06/2008, First Mediterranean Photonic Conference. Italy

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  317. Published

    Flip-cathode field emission vacuum triode for THz applications

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G. & Di Carlo, A., 05/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  318. Published

    FTIR analysis of natural and synthetic collagen

    Riaz, T., Zeeshan, R., Zarif, F., Ilyas, K., Muhammad, N., Safi, S. Z., Rahim, A., Rizvi, S. A. A. & Rehman, I. U., 1/09/2018, In: APPLIED SPECTROSCOPY REVIEWS. 53, 9, p. 703-746 44 p.

    Research output: Contribution to journalReview articlepeer-review

  319. Published

    Optical properties of metamorphic type-I InAs1-xSbx/AlyIn1-yAs quantum wells grown on GaAs for the mid-infrared spectral range

    Repiso Menendez, E., Broderick, C., de la Mata, M., Arkani, R., Lu, Q., Marshall, A., Molina, S., O'Reilly, E., Carrington, P. & Krier, A., 30/08/2019, In: Journal of Physics D: Applied Physics. 52, 10 p., 465102.

    Research output: Contribution to journalJournal articlepeer-review

  320. Published

    ABA regulated gene expression in stomatal guard cells of Commelina communis.

    Renwick, K. F., Webb, A. A. R., Sarsag, M., Shirras, A. D., Mansfield, T. A. & Hetherington, A. M., 1992, In: Journal of Experimental Botany. 43, Supple, p. P10.64

    Research output: Contribution to journalJournal article

  321. Published

    Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on

    Rennie, A. E. W. (ed.), Jacobson, D. M. (ed.) & Bocking, C. (ed.), 2002, Professional Engineering Publishing. 173 p.

    Research output: Book/Report/ProceedingsBook

  322. Published

    Electroforming for Injection Moulding

    Rennie, A. E. W. & Bocking, C., 2002, In: State of the Art Report - RAPTIA European Thematic Network.

    Research output: Contribution to journalJournal article

  323. Published

    The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes

    Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  324. Published

    Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes

    Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  325. Published

    Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)

    Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  326. Published

    Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on

    Rennie, A. (ed.), Jacobson, D. M. (ed.) & Bocking, C. E. (ed.), 2005, X-CD Technologies Inc. 129 p.

    Research output: Book/Report/ProceedingsBook

  327. Published

    Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on

    Rennie, A. (ed.), Jacobson, D. M. (ed.) & Bocking, C. E. (ed.), 2008, MJA Print. 173 p.

    Research output: Book/Report/ProceedingsBook

  328. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on

    Rennie, A. (ed.), Bocking, C. E. (ed.) & Jacobson, D. M. (ed.), 2009, MJA Print. 123 p.

    Research output: Book/Report/ProceedingsBook

  329. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on

    Rennie, A. (ed.) & Bocking, C. E. (ed.), 06/2011, CRDM Ltd. 203 p.

    Research output: Book/Report/ProceedingsBook

  330. Published

    Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software

    Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  331. Published

    Electroforming for Injection Moulding

    Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  332. Published

    Rapid design, prototyping and manufacturing

    Rennie, A., Aitchison, D. (ed.) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.

    Research output: Contribution to journalEditorial

  333. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  334. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  335. Published

    Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

    Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  336. Published

    A transnational approach to the implementation of eco-design methodologies in SMEs

    Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  337. Published

    A review of suitable methods for producing automated or semi automated product designs for production using RM technologies

    Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  338. Unpublished
  339. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/ProceedingsCommissioned report

  340. Published

    Virtual Prototyping Phase II

    Rennie, A., 05/2006, N/A. 37 p.

    Research output: Book/Report/ProceedingsCommissioned report

  341. Published

    Virtual Prototyping

    Rennie, A., 07/2005, N/A. 77 p.

    Research output: Book/Report/ProceedingsCommissioned report

  342. Published

    Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference

    Rennie, A. E. W. (ed.) & Bibb, R. (ed.), 2016, Lancaster: Lancaster University. 165 p.

    Research output: Book/Report/ProceedingsProceedings

  343. Published

    University Programmes during COVID-19 Pandemic

    Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNEntry for encyclopedia/dictionary

  344. Published

    The mechanical behaviour of silicon diaphragms for micromachined capacitive pressure sensor

    Ren, J., Cheneler, D. & Ward, M., 2008, In: Advances in Science and Technology. 54, p. 422-427 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  345. Published

    Fast terahertz imaging using a quantum cascade amplifier

    Ren, Y., Wallis, R., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Beere, H. E. & Ritchie, D. A., 6/07/2015, In: Applied Physics Letters. 107, 1, 5 p., 011107.

    Research output: Contribution to journalJournal articlepeer-review

  346. Published

    Terahertz quantum cascade amplifier

    Ren, Y., Wallis, R., Shah, Y. D., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Kamboj, V., Beere, H. E. & Ritchie, D. A., 2015, 26th International Symposium on Space Terahertz Technology, ISSTT 2015. International Symposium on Space Terahertz Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  347. Published

    Single mode terahertz quantum cascade amplifier

    Ren, Y., Wallis, R., Shah, Y. D., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Kamboj, V., Beere, H. E. & Ritchie, D. A., 10/2014, In: Applied Physics Letters. 105, 14, 4 p., 141102.

    Research output: Contribution to journalJournal articlepeer-review

  348. Published

    Fast Terahertz imaging using a quantum cascade amplifier up to 20,000 pps

    Ren, Y., Wallis, R., Jessop, D. S., Degl'innocenti, R., Klimont, A., Beere, H. E. & Ritchie, D. A., 12/04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  349. Published

    Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion

    Ren, Y., Liang, L., Shan, Q., Cai, A., Du, J., Huang, Q., Liu, S., Yang, X., Tian, Y. & Wu, H., 31/12/2020, In: Virtual and Physical Prototyping. 15, S1, p. 543-554 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  350. Published

    Finite element analysis to support component level fault modelling for MEMS.

    Reichenbach, R., Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of SPIE design, test, integration and packaging of MEMS symposium. Vol. 4408. p. 147-158 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  351. Published

    Raman spectroscopic analysis of breast cancer tissues: Identifying differences between normal, invasive ductal carcinoma and ductal carcinoma in situ of the breast tissue

    Rehman, S., Movasaghi, Z., Tucker, A. T., Joel, S. P., Darr, J. A., Ruban, A. V. & Rehman, I. U., 2007, In: Journal of Raman Spectroscopy. 38, 10, p. 1345-1351 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  352. Published

    Analysis of apatite layers on glass-ceramic particulate using FTIR and FT-Raman spectroscopy

    Rehman, I., Karsh, M., Hench, L. L. & Bonfield, W., 2000, In: Journal of Biomedical Materials Research Part A. 50, 2, p. 97-100 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  353. Published

    Analysis of in vitro reaction layers formed on Bioglass® using thin- film X-ray diffraction and ATR-FTIR microspectroscopy

    Rehman, I., Knowles, J. C. & Bonfield, W., 1998, In: Journal of Biomedical Materials Research Part A. 41, 1, p. 162-166 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  354. Published

    Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy

    Rehman, I. & Bonfield, W., 1997, In: Journal of Materials Science: Materials in Medicine. 8, 1, p. 1-4 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  355. Published

    Fourier transform infrared analysis of poly(ester-urethanes) at low temperature in-situ by using a newly constructed liquid nitrogen cooled sample stage

    Rehman, I., Barnardo, C. & Smith, R., 1997, In: Journal of Materials Science. 32, 10, p. 2617-2621 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  356. Published

    Biodegradable polyurethanes: biodegradable low adherence films for the prevention of adhesions after surgery

    Rehman, I. U., 1996, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 11, 2, p. 182-257 76 p.

    Research output: Contribution to journalJournal articlepeer-review

  357. Published

    In situ analysis of the degree of polymerization of bone cement by using FT-Raman spectroscopy

    Rehman, I., Harper, E. J. & Bonfield, W., 1996, In: Biomaterials. 17, 16, p. 1615-1619 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  358. Published

    In vitro degradation of poly(ester-urethanes) for biomedical applications

    Rehman, I., Andrews, E. H. & Smith, R., 1996, In: Journal of Materials Science: Materials in Medicine. 7, 1, p. 17-20 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  359. Published

    Characterization of synthetic and natural materials by Fourier transform Raman spectroscopy

    Rehman, I. U., 1995, In: Journal of Advanced Materials. 27, 1, p. 59-63 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  360. Published

    Structural evaluation of human and sheep bone and comparison with synthetic hydroxyapatite by FT‐Raman spectroscopy

    Rehman, I., Smith, R., Hench, L. L. & Bonfield, W., 1/10/1995, In: Journal of Biomedical Materials Research Part A. 29, 10, p. 1287-1294 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  361. Published

    Analysis of surface layers on bioactive glasses

    Rehman, I., Hench, L. L., Bonfield, W. & Smith, R., 1/08/1994, In: Biomaterials. 15, 10, p. 865-870 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  362. Published

    Vibrational spectroscopy for tissue analysis: Vibrational Spectroscopy for Tissue Analysis

    Rehman, I. U., Movasaghi, Z. & Rehman, S., 2012, 1st ed. CRC Press. 303 p.

    Research output: Book/Report/ProceedingsBook

  363. Published

    Dental regeneration

    Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  364. Published

    Fourier transform infrared spectroscopic analysis of breast cancer tissues; Identifying differences between normal breast, invasive ductal carcinoma, and ductal carcinoma in situ of the breast

    Rehman, S., Movasaghi, Z., Darr, J. A. & Rehman, I. U., 2010, In: APPLIED SPECTROSCOPY REVIEWS. 45, 5, p. 355-368 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  365. Published

    Role of artificial intelligence and vibrational spectroscopy in cancer diagnostics

    Rehman, I. U., Khan, R. S. & Rehman, S., 1/08/2020, In: Expert Review of Molecular Diagnostics. 20, 8, p. 749-755 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  366. Published

    Sparkling extreme-ultraviolet bright dots observed with Hi-C

    Régnier, S., Alexander, C. E., Walsh, R. W., Winebarger, A. R., Cirtain, J., Golub, L., Korreck, K. E., Mitchell, N., Platt, S., Weber, M., De Pontieu, B., Title, A., Kobayashi, K., Kuzin, S. & Deforest, C. E., 2014, In: The Astrophysical Journal. 784, 2, 11 p., 134.

    Research output: Contribution to journalJournal articlepeer-review

  367. Published

    Validation of a hybrid electric vehicle dynamics model for energy management and vehicle stability control

    Reeves, K., Montazeri, A. & Taylor, C. J., 8/06/2016, Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on. IEEE, p. 849-854 6 p. (Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  368. Published

    Model development and energy management control for hybrid electric race vehicles

    Reeves, K., Montazeri, A. & Taylor, C. J., 31/08/2016, 2016 UKACC 11th International Conference on Control (CONTROL). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  369. Published

    Integrated optimisation for dynamic modelling, path planning and energy management in hybrid race vehicles

    Reeves, K., 2021, Lancaster University. 268 p.

    Research output: ThesisDoctoral Thesis

  370. Published

    High pressure vapor–liquid equilibrium for the ternary system ethanol/(±)-menthol/carbon dioxide

    Rebocho, S., V. M. Nunes, A., Najdanovic-Visak, V., Barreiros, S., Simões, P. M. C. & Paiva, A., 08/2014, In: Journal of Supercritical Fluids. 92, p. 282–287 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  371. Published

    Experimental Determination and Modeling of the Phase Behavior of the CO2 + Propionic Anhydride Binary System at High Pressure

    Rebocho, S., V. M. Nunes, A., Najdanovic, V., Barreiros, S. & Paiva, A., 12/01/2017, In: Journal of Chemical and Engineering Data. 62, 1

    Research output: Contribution to journalJournal articlepeer-review

  372. Published

    Accounting for the unique, doubly dual nature of ionic liquids from a molecular thermodynamic, and modeling standpoint

    Rebelo, L. P. N., Lopes, J. N. C., Esperanca, J. M. S. S., Guedes, H. J. R., Lachwa, J., Najdanovic-Visak, V. & Visak, Z. P., 11/2007, In: Accounts of Chemical Research. 40, 11, p. 1114-1121 8 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  373. Published

    Phase behavior and thermodynamic properties of ionic liquids, ionic liquid mixtures, and ionic liquid solutions

    Rebelo, LPN., Najdanovic-Visak, V., de Azevedo, RG., Esperanca, JMSS., da Ponte, MN., Guedes, HJR., Visak, Z. P., de Sousa, HC., Szydlowski, J., Lopes, JNC. & Cordeiro, TC., 2005, Ionic liquids III: fundamentals, progress, challenges, and opportunities. Rogers, R. D. & Seddon, K. R. (eds.). Washington, D. C.: American Chemical Society, p. 270-291 22 p. (ACS Symposium Series; vol. 901).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  374. Published

    A detailed thermodynamic analysis of [C(4)mim][BF4] plus water as a case study to model ionic liquid aqueous solutions

    Rebelo, LPN., Najdanovic-Visak, V., Visak, Z. P., da Ponte, MN., Szydlowski, J., Cerdeirina, CA., Troncoso, J., Romani, L., Esperanca, JMSS., Guedes, HJR. & de Sousa, HC., 2004, In: Green Chemistry. 6, 8, p. 369-381 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  375. Published

    Double critical phenomena in (water plus polyacrylamides) solutions

    Rebelo, LPN., Visak, Z. P., de Sousa, HC., Szydlowski, J., de Azevedo, RG., Ramos, A. M., Najdanovic-Visak, V., da Ponte, MN. & Klein, J., 26/02/2002, In: Macromolecules. 35, 5, p. 1887-1895 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  376. Published

    Two ways of looking at Prigogine and Defay's equation

    Rebelo, LPN., Najdanovic-Visak, V., Visak, Z. P., da Ponte, MN., Troncoso, J., Cerdeirina, CA. & Romani, L., 2002, In: Physical Chemistry Chemical Physics. 4, 11, p. 2251-2259 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  377. Published

    Intracavity generation of 610 nm light by periodically poled near-stoichiometric lithium tantalate

    Rautiainen, J., Okhotnikov, O. G., Eger, D., Zolotovskaya, S., Fedorova, K. A. & Rafailov, E. U., 29/01/2009, In: Electronics Letters. 45, 3, p. 177-179 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  378. Published

    Energy Return on Energy Invested (ERoEI) for photovoltaic solar systems in regions of moderate insolation: a comprehensive response

    Raugei, M., Sgouridis, S., Murphy, D., Fthenakis, V., Frischknecht, R., Breyer, C., Bardi, U., Barnhart, C., Buckley, A., Carbajales-Dale, M., Csala, D., de Wild-Scholten, M., Heath, G., Jæger-Waldau, A., Jones, C., Keller, A., Leccisi, E., Mancarella, P., Pearsall, N., Siegel, A. & 2 others, Sinke, W. & Stolz, P., 03/2017, In: Energy Policy. 102, p. 377-384 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  379. Published

    Corrosion behaviour of AGR simulated fuels: evolution of the fuel surface

    Rauff-Nisthar, N., Boxall, C., Farnan, I., Hiezl, Z., Lee, W., Perkins, C. & Wilbraham, R., 09/2013, In: ECS Transactions. 53, 21, p. 95-104 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  380. Published

    Corrosion behaviour of AGR SIMFUELS

    Rauff-Nisthar, N., Boxall, C., Hambley, D., Hiezl, Z., Padovani, C. & Wilbraham, R., 11/08/2015, In: ECS Transactions. 66, 17, p. 85-94 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  381. Published

    BLDC motor power control techniques appraisal: novel current control technique

    Ratcliffe, M. & Gamage, K., 2013, Power Engineering, Energy and Electrical Drives (POWERENG), 2013 Fourth International Conference on. Piscataway, N.J.: IEEE, p. 1700-1705 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  382. Published

    Providing location based information/advertising for existing mobile phone users.

    Rashid, O., Coulton, P. & Edwards, R., 01/2008, In: Personal and Ubiquitous Computing. 12, 1, p. 3-10 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  383. Published

    Extending Cyberspace:Location Based Games Using Cellular Phones.

    Rashid, O., Mullins, I., Coulton, P. & Edwards, R., 01/2006, In: Computers in Entertainment (CIE). 4, 1, p. 1-18 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  384. Published

    PAC-LAN: Mixed reality gaming with RFID enabled mobile phones

    Rashid, O., Bamford, W., Coulton, P., Edwards, R. & Scheible, J., 1/10/2006, In: Computers in Entertainment (CIE). 4, 4, p. 1-17 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  385. Published

    Implications of IMS and SIP on the Evolution of Mobile Applications.

    Rashid, O., Coulton, P. & Edwards, R., 07/2006, Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  386. Published

    PAC-LAN: the human arcade.

    Rashid, O., Bamford, W., Coulton, P. & Edwards, R., 06/2006, ACE '06 Proceedings of the 2006 ACM SIGCHI international conference on Advances in computer entertainment technology. New York: ACM, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNOther chapter contribution

  387. Published

    Implementing Location Based Information/Advertising for Existing Mobile Phone Users in Indoor/Urban Environments.

    Rashid, O., Coulton, P. & Edwards, R., 07/2005, Mobile Business, 2005. ICMB 2005. International Conference on. IEEE, p. 377-383 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  388. Published

    Utilising RFID for mixed reality mobile games.

    Rashid, O., Coulton, P., Edwards, R. & Bamford, W., 01/2006, Consumer Electronics, 2006. ICCE '06. 2006 Digest of Technical Papers. International Conference on. IEEE, p. 459-460 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  389. Published

    Dopamine/mucin-1 functionalized electro-active carbon nanotubes as a probe for direct competitive electrochemical immunosensing of breast cancer biomarker

    Rashid, S., Nawaz, M. H., Rehman, I. U., Hayat, A. & Marty, J. L., 1/03/2021, In: Sensors and Actuators B: Chemical. 330, 11 p., 129351.

    Research output: Contribution to journalJournal articlepeer-review

  390. Published

    Combustion characteristics of H2/N2 and H2/CO syngas nonpremixed flames

    Ranga Dinesh, K. K. J., Jiang, X., Kirkpatrick, M. P. & Malalasekera, W., 11/2012, In: International Journal of Hydrogen Energy. 37, 21, p. 16186-16200 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  391. Published

    Influence of fuel variability on the characteristics of impinging non-premixed syngas burning

    Ranga Dinesh, K. K. J., Jiang, X., van Oijen, J. A., Bastiaans, R. J. M. & de Goey, L. P. H., 2013, In: Symposium International on Combustion. 34, 2, p. 3219–3229 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  392. Published

    Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames

    Ranga Dinesh, K. K. J., Jiang, X., Malalasekera, W. & Odedra, A., 03/2013, In: Fuel Processing Technology. 107, p. 2-13 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  393. Published

    Direct numerical simulation of nonpremixed syngas burning with detailed chemistry

    Ranga Dinesh, K. K. J., Jiang, X. & van Oijen, J. A., 05/2013, In: Fuel. 107, p. 343-355 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  394. Published

    Hydrogen-enriched nonpremixed jet flames: effects of preferential diffusion

    Ranga Dinesh, K. K. J., Jiang, X., van Oijen, J. A., Bastiaans, R. J. M. & de Goey, L. P. H., 15/04/2013, In: International Journal of Hydrogen Energy. 38, 11, p. 4848-4863 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  395. Published

    Hydrogen-enriched non-premixed jet flames: compositional structures with near-wall effects

    Ranga Dinesh, K. K. J., Jiang, X. & van Oijen, J. A., 22/04/2013, In: International Journal of Hydrogen Energy. 38, 12, p. 5150-5164 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  396. Published

    Hydrogen-enriched non-premixed jet flames: analysis of the flame surface, flame normal, flame index and Wobbe index

    Ranga Dinesh, K. K. J., Jiang, X. & van Oijen, J. A., 15/04/2014, In: International Journal of Hydrogen Energy. 39, 12, p. 6753-6763 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  397. Published

    Near-field local flame extinction of oxy-syngas non-premixed jet flames: a DNS study

    Ranga Dinesh, K. K. J., van Oijen, J. A., Luo, K. H. & Jiang, X., 15/08/2014, In: Fuel. 130, p. 189–196 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  398. Published

    RadICAL Stack: a localisation method for dynamic gamma/neutron fields

    Randall, G., Ellis, M., Duroe, K., Jones, A. R., Joyce, M. J., Payne, C., Sellin, P. & Speller, R., 31/10/2015, 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, p. 1-4 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  399. Published

    The use of vibrational spectroscopy to study the pathogenesis multiple sclerosis and other neurological conditions

    Ramos, I. R., Lyng, F. M., Rehman, I. U., Sharrack, B. & Woodroofe, M. N., 1/10/2017, In: APPLIED SPECTROSCOPY REVIEWS. 52, 10, p. 868-882 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  400. Published

    Prediction of CO2/O2 absorption selectivity using supported ionic liquid membranes (SILMs) for gas–liquid membrane contactor

    Ramli, N. A., Hashim, N. A. & Aroua, M. K., 4/03/2018, In: Chemical Engineering Communications. 205, 3, p. 295-310 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  401. Published

    Supported ionic liquid membranes (SILMs) as a contactor for selective absorption of CO2/O2 by aqueous monoethanolamine (MEA)

    Ramli, N. A., Hashim, N. A. & Aroua, M. K., 2/01/2020, In: Separation and Purification Technology. 230, 9 p., 115849.

    Research output: Contribution to journalJournal articlepeer-review

  402. Published

    The effects of 1-ethyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide [emim] [NTf2] IL: acetone compositions on the amount, homogeneity and chemical stability of immobilized IL in hollow fiber-supported ionic liquid membranes (SILMs)

    Ramli, N. A., Hashim, N. A., Aroua, M. K., Shamiri, A. & Abdul Patah, M. F., 31/07/2021, In: Chemical Engineering Communications. 208, 7, p. 925-936 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  403. Published

    Preliminary fabrication and characterization of electron beam melted Ti-6Al-4V customized dental implant

    Ramakrishnaiah, R., Al Kheraif, A. A., Mohammad, A., Divakar, D. D., Kotha, S. B., Celur, S. L., Hashem, M. I., Vallittu, P. K. & Rehman, I. U., 1/05/2017, In: SAUDI JOURNAL OF BIOLOGICAL SCIENCES. 24, 4, p. 787-796 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  404. Published

    Applications of Raman spectroscopy in dentistry part II: Soft tissue analysis

    Ramakrishnaiah, R., Kotha, S. B., Alkheraif, A. A., Celur, S. L., Divakar, D. D., Javed, F. & Rehman, I. U., 1/10/2016, In: APPLIED SPECTROSCOPY REVIEWS. 51, 10, p. 799-821 23 p.

    Research output: Contribution to journalJournal articlepeer-review

  405. Published

    Applications of Raman spectroscopy in dentistry: Analysis of tooth structure

    Ramakrishnaiah, R., Rehman, G. U., Basavarajappa, S., Al Khuraif, A. A., Durgesh, B. H., Khan, A. S. & Rehman, I. U., 2015, In: APPLIED SPECTROSCOPY REVIEWS. 50, 4, p. 332-350 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  406. Published

    A comparative finite elemental analysis of glass abutment supported and unsupported cantilever fixed partial denture

    Ramakrishaniah, R., Al Kheraif, A. A., Elsharawy, M. A., Alsaleh, A. K., Ismail Mohamed, K. M. & Rehman, I. U., 2015, In: Dental Materials. 31, 5, p. 514-521 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  407. Published

    Urban bus driver ride and road-friendliness. Part I: model development and role of operating parameters

    Rakheja, S., Cao, D. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 305-332 28 p.

    Research output: Contribution to journalJournal articlepeer-review

  408. Published

    Electrospun polycaprolactone membranes with Zn-doped bioglass for nasal tissues treatment

    Rajzer, I., Dziadek, M., Kurowska, A., Cholewa-Kowalska, K., Ziabka, M., Menaszek, E. & Douglas, T., 1/07/2019, In: Journal of Materials Science: Materials in Medicine. 30, 11 p., 80.

    Research output: Contribution to journalJournal articlepeer-review

  409. E-pub ahead of print

    Adaptive Self-Organizing Fuzzy Sliding Mode Controller for a Non-Local Strain Gradient Nanobeam

    Rajaeia, A., Chizfahm, A., Vatankhah, R. & Montazeri, A., 11/03/2022, (E-pub ahead of print) In: European Journal of Control. 100626.

    Research output: Contribution to journalJournal articlepeer-review

  410. Published

    Nonlinear identification of a gas turbine system in transient operation mode using neural network

    Rahnama, M., Ghorbani, H. & Montazeri, A., 2012, Thermal Power Plants (CTPP), 2012 4th Conference on. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  411. Published

    Machine-learning approach for fault detection in brushless synchronous generator using vibration signals

    Rahnama, M., Vahedi, A., Alikhani, A. M. & Montazeri, A., 1/08/2019, In: IET Science, Measurement & Technology. 13, 6, p. 852-861 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  412. Published

    Investigating a Power-Absorber Wave Energy Converter.

    Rahmati, M. T., Aggidis, G. A. & Chaplin, R. V., 07/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  413. Published

    Test on a Novel Pitching-Surge Wave Energy Converter.

    Rahmati, M. T., Aggidis, G. A., Chaplin, R. V. & McCabe, A. P., 07/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  414. Published

    A RANS Code for Low-Speed Axial Turbo machinery flow analysis.

    Rahmati, M. T. & Aggidis, G. A., 06/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  415. Published

    An inverse approach for blade shape design.

    Rahmati, M. T. & Aggidis, G. A., 05/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  416. Published

    An inverse approach for airfoil design.

    Rahmati, M. T., Aggidis, G. A. & Zangeneh, M., 05/2008, In: Advances in Fluid Mechanics. 59, p. 35-44 10 p.

    Research output: Contribution to journalJournal article

  417. Published

    Numerical and experimental analysis of the power output of a point absorber wave energy converter in irregular waves

    Rahmati, M. & Aggidis, G. A., 1/01/2016, In: Ocean Engineering. 111, p. 483-492 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  418. Published

    Investigating a power-obsorber wave energy converter

    Rahmati, M. T., Mccabe, A. P., Aggidis, G. A. & Chaplin, R. V., 2008, ASME 2008 Power Conference. American Society of Mechanical Engineers (ASME), p. 699-705 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  419. Published

    A review of recent developments on kinetics parameters for glycerol electrochemical conversion – A by-product of biodiesel

    Rahim, S. A. N. M., Lee, C. S., Abnisa, F., Aroua, M. K., Daud, W. A. W., Cognet, P. & Pérès, Y., 25/02/2020, In: Science of the Total Environment. 705, 27 p., 135137.

    Research output: Contribution to journalReview articlepeer-review

  420. Published

    Significance enhancement in the conductivity of core shell nanocomposite electrolytes

    Rafique, A., Raza, R., Akram, N., Ullah, M. K., Ali, A., Irshad, M., Siraj, K., Khan, M. A., Zhu, B. & Dawson, R. J., 6/10/2015, In: RSC Advances. 2015, 105, p. 86322-86329 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  421. Published

    Dairy-inspired coatings for bone implants from whey protein isolate-derived self-assembled fibrils

    Rabe, R., Hempel, U., Martocq, L., Keppler, J. K., Aveyard, J. & Douglas, T., 3/08/2020, In: International Journal of Molecular Sciences. 21, 15, 7 p., 5544.

    Research output: Contribution to journalJournal articlepeer-review

  422. Published

    The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector

    Qureshi, J., Lam, D. & Ye, J., 05/2011, In: Engineering Structures. 33, 5, p. 1643-1656 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  423. Published

    Effect of shear connector spacing and layout on the shear connector capacity in composite beams

    Qureshi, J., Lam, D. & Ye, J., 04/2011, In: Journal of Constructional Steel Research. 67, 4, p. 706-719 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  424. Published

    Finite element modelling of shear connection behaviour in a push test using profiled sheeting

    Qureshi, J., Lam, D. & Ye, J., 16/08/2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. CRC Press/Balkema, p. 679-682 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  425. Published

    Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting

    Qureshi, J., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 737-744 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  426. Published

    The influence of vegetation species and plant properties on runoff and soil erosion: results from a rainfall simulation study in south east Spain.

    Quinton, J. N., Edwards, G. M. & Morgan, R. P. C., 09/1997, In: Soil Use and Management. 13, 3, p. 143-148 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  427. Published

    Preliminary investigation of multi-element profiles for a high-life variable pitch vertical-axis tidal stream device.

    Quayle, S. D. & Aggidis, G. A., 2006, In: IMechE Conference Transactions. v. 10

    Research output: Contribution to journalJournal articlepeer-review

  428. Published

    Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator

    Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  429. Published

    Assessing the energy potential of modernizing the European hydropower fleet

    Quaranta, E., Aggidis, G., Boes, R., Comoglio, C., De Michele, C., Ritesh Patro, E., Georgievskaia, E., Harby, A., Kougias, I., Muntean, S., Pérez-Díaz, J., Romero–Gomez, P., Rosa-Clot, M., Schleiss, A., Vagnoni, E., Wirth, M. & Pistocchi, A., 15/10/2021, In: Energy Conversion and Management. 246, 15 p., 114655.

    Research output: Contribution to journalJournal articlepeer-review

  430. Published

    Reagent and power consumption of in-situ waterborne pollution monitoring systems

    Quane, N., Moore, B. & Cheneler, D., 3/07/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  431. Published

    Resource management in microreactors - a computational study

    Quane, N., Moore, B. & Cheneler, D., 3/07/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  432. Published

    Optimised self-calibrating microfluidic systems towards design optimisation

    Quane, N., 24/04/2022, Lancaster University. 182 p.

    Research output: ThesisDoctoral Thesis

  433. Published

    Modeling driver steering control based on stochastic model predictive control

    Qu, T., Chen, H., Ji, Y., Guo, H. & Cao, D., 10/2013, p. 3704-3709. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  434. Published

    Auto-generation methodology of complex-shaped coarse aggregate set of 3D concrete numerical test specimen

    Qiu, W., Fu, S. & Ye, J., 30/08/2019, In: Construction and Building Materials. 217, p. 612-625 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  435. Published

    Thermo electroelastic solutions for surface bone remodeling under axial and transverse loads

    Qin, Q. H., Qu, C. Y. & Ye, J. Q., 11/2005, In: Biomaterials. 26, 33, p. 6798-6810 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  436. Published

    Thermoelectroelastic solutions for internal bone remodeling under axial and transverse loads

    Qin, Q. H. & Ye, J. Q., 05/2004, In: International Journal of Solids and Structures. 41, 9-10, p. 2447-2460 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  437. Published

    Toughening mechanisms in composite materials

    Qin, Q. (ed.) & Ye, J. (ed.), 06/2015, Elsevier. 416 p. (Woodhead Publishing Series in Composites Science and Engineering)

    Research output: Book/Report/ProceedingsBook

  438. Published

    Formation mechanism of tight coal-derived-gas reservoirs with medium-low abundance in Xujiahe Formation, central Sichuan Basin, China

    Qin, S., Li, F., Li, W., Zhou, Z. & Zhou, G., 01/2018, In: Marine and Petroleum Geology. 89, 1, p. 144-154 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  439. Published

    Preparation and characterization of bioactive composites and fibers for dental applications

    Qidwai, M., Sheraz, M. A., Ahmed, S., Alkhuraif, A. A. & Ur Rehman, I., 2014, In: Dental Materials. 30, 10, p. e253-e263 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  440. Published

    Condition monitoring of wind turbines based on extreme learning machine

    Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  441. Published

    An integrated data-driven model-based approach to condition monitoring of the wind turbine gearbox

    Qian, P., Ma, X. & Cross, P., 12/07/2017, In: IET Renewable Power Generation. 11, 9, p. 1177-1185 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  442. Published

    Reducing neutral-point voltage fluctuation in NPC three-level active power filters

    Qian, P., Ma, X., Liu, G. & Chen, Z., 06/2018, In: Electrical Engineering. 100, 2, p. 721-732 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  443. Published

    Estimating Health Condition of the Wind Turbine Drivetrain System

    Qian, P., Ma, X. & Zhang, D., 12/10/2017, In: Energies. 2017, 10, 19 p., 1583.

    Research output: Contribution to journalJournal articlepeer-review

  444. Unpublished

    Data-driven model-based approaches to condition monitoring and improving power output of wind turbines

    Qian, P., 2017, (Unpublished) Lancaster University. 183 p.

    Research output: ThesisDoctoral Thesis

  445. Published

    Data-driven condition monitoring approaches to improving power output of wind turbines

    Qian, P., Ma, X., Zhang, D. & Wang, J., 1/08/2019, In: IEEE Transactions on Industrial Electronics. 66, 8, p. 6012 - 6020 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  446. Published

    Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine

    Qasim, S. B., Zafar, M. S., Najeeb, S., Khurshid, Z., Shah, A. H., Husain, S. & Rehman, I. U., 02/2018, In: International Journal of Molecular Sciences. 19, 2, 26 p., 407.

    Research output: Contribution to journalReview articlepeer-review

  447. Published

    In- vitro and in -vivo degradation studies of freeze gelated porous chitosan composite scaffolds for tissue engineering applications

    Qasim, S. B., Husain, S., Huang, Y., Pogorielov, M., Deineka, V., Lyndin, M., Rawlinson, A. & Rehman, I. U., 1/02/2017, In: Polymer Degradation and Stability. 136, p. 31-38 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  448. Published

    Application of nanomaterials in dentistry: Micro and Nanomanufacturing

    Qasim, S. B. & Rehman, I. U., 2017, Micro and Nanomanufacturing. Springer International Publishing, Vol. 2. p. 319-336 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  449. Published

    Freeze gelated porous membranes for periodontal tissue regeneration

    Qasim, S. B., Delaine-Smith, R. M., Fey, T., Rawlinson, A. & Rehman, I. U., 1/09/2015, In: Acta Biomaterialia. 23, p. 317-328 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  450. Published

    Potential of electrospun chitosan fibers as a surface layer in functionally graded GTR membrane for periodontal regeneration

    Qasim, S. B., Najeeb, S., Delaine-Smith, R. M., Rawlinson, A. & Ur Rehman, I., 1/01/2017, In: Dental Materials. 33, 1, p. 71-83 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  451. Published

    The influence of lifestyle factors on bone mineral density at the mid radius assessed using pQCT

    Pye, S. R., Ward, K. A., Roy, D. K., Swarbrick, C. M., Adams, J. E., Silman, A. J. & O'Neill, T. W., 2005, In: Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research. 20, 9, p. S378 1 p.

    Research output: Contribution to journalJournal articlepeer-review

  452. Published

    Mathematical Model Analysis for Mass and Rates of Woodchip IR Drying

    Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/08/2020, Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering. Avestia , 9 p. HTFF 177. ( Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  453. Published

    A Comparative Study of Diffusion Coefficients from Convective and IR Drying of Woodchip

    Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/11/2020, In: Journal of Fluid Flow, Heat and Mass Transfer. 7, p. 66-72 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  454. Published

    An Experimental and CFD Based Analysis on Industrial Biomass Drying Production

    Pryce, M., 2021, Lancaster University. 249 p.

    Research output: ThesisMaster's Thesis

  455. Published

    Characterization of the ANITA neutron source for accelerated SEE testing at the Svedberg Laboratory

    Prokofiev, A. V., Blomgren, J., Majerle, M., Nolte, R., Röttger, S., Platt, S. P., Xiao, C. X. & Smirnov, A. N., 1/12/2009, 2009 IEEE Radiation Effects Data Workshop, REDW 2009 - Workshop Record, Held in Conjunction with the IEEE Nuclear and Space Radiation Effects Conference, NSREC 2009. IEEE, p. 166-173 8 p. 5336295. (IEEE Radiation Effects Data Workshop).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  456. Published

    ANITA - A new neutron facility for accelerated SEE testing at the Svedberg Laboratory

    Prokofiev, A. V., Blomgren, J., Platt, S. P., Nolte, R., Röttger, S. & Smirnov, A. N., 17/11/2009, 2009 IEEE International Reliability Physics Symposium, IRPS 2009. IEEE, p. 929-935 7 p. 5173383. (IEEE International Reliability Physics Symposium Proceedings).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  457. Published

    Characterization of the ANITA neutron source for accelerated SEE testing at the Svedberg laboratory

    Prokofiev, A. V., Blomgren, J., Nolte, R., Platt, S. P., Röttger, S. & Smirnov, A. N., 1/12/2008, 2008 European Conference on Radiation and Its Effects on Components and Systems, RADECS 2008. IEEE, p. 260-267 8 p. 5782723. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  458. Published

    A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR

    Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  459. Published

    An approach to realistic fault prediction and layout design for testability in analogue circuits.

    Prieto, J., Richardson, A. M. D., Rueda, A. & Grout, I., 1998, Proceedings of the conference on design, automation and test in Europe. Paris, p. 906-912 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  460. Published

    An approach to realistic fault prediction and layout design for testability in analog circuits

    Prieto, J. A., Rueda, A., Grout, I., Peralias, E., Huertas, J. L. & Richardson, A. M. D., 1998, Design, Automation and Test in Europe, 1998 Proceedings. LOS ALAMITOS: IEEE COMPUTER SOC, p. 905-909 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  461. Published

    Novel developments in the MOSFET dosemeter for neutron dosimetry applications

    Price, R. A., Benson, C., Joyce, M. J., Kestell, D. J. & Silvie, J., 2004, In: Radiation Protection Dosimetry. 110, 1-4, p. 283-290 8 p.

    Research output: Contribution to journalJournal article

  462. Published

    Development of a linear array for intracavitary in vivo dosimetry during external beam radiotherapy and brachytherapy.

    Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2004, In: IEEE Transactions on Nuclear Science. 51, 4, p. 1420-1426 7 p., 8076167 .

    Research output: Contribution to journalJournal articlepeer-review

  463. Published

    Development of a linear array for intracavatary in vivo dosimetry during external beam radiotherapy and brachytherapy.

    Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2003, Proceedings of the nuclear science symposium, medical imaging conference: 13th international workshop on room temperature semiconductor X- and gamma-ray detectors.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  464. Published

    Novel developments in the MOSFET for neutron radiation dosimetry applications

    Price, R. A., Kestell, D. J., Stevens, D. L., Jaksic, A., Silvie, J. & Joyce, M. J., 2003, Proceedings of the 9th neutron dosimetry symposium.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  465. Published

    Data-Based Mechanistic Modelling (DBM) and control of mass and energy transfer in agricultural buildings

    Price, L., Young, P. C., Berckmans, D., Janssens, K. & Taylor, C. J., 1999, In: Annual Reviews in Control. 23, 1, p. 71-82 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  466. Published

    Stress-induced curvature of focused ion beam fabricated microcantilevers

    Prewett, P. D., Anthony, C. J., Cheneler, D. & Ward, M. C. L., 8/04/2008, In: Micro and Nano Letters. 3, 1, p. 25-28 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  467. Published

    Liquid-liquid phase equilibria of aqueous biphasic systems based on glycerol formal: Application on tetracycline recovery from water

    Praikaew, W., Kiatkittipong, W., Kiatkittipong, K., Assabumrungrat, S., Aiouache, F. & Najdanovic-Visak, V., 1/11/2019, In: Journal of Chemical and Engineering Data. 64, 11, p. 4856-4862 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  468. Published

    Process and Energy Intensification of Glycerol Carbonate Production from Glycerol and Dimethyl Carbonate in the Presence of Eggshell-Derived CaO Heterogeneous Catalyst

    Praikaew, W., Kiatkittipong, W., Aiouache, F., Najdanovic-Visak, V., Ngaosuwan, K., Wongsawaeng, D., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 14/07/2021, In: Energies. 14, 14, 15 p., 4249.

    Research output: Contribution to journalJournal articlepeer-review

  469. Published

    Mechanism of CaO catalyst deactivation with unconventional monitoring method for glycerol carbonate production via transesterification of glycerol with dimethyl carbonate

    Praikaew, W., Kiatkittipong, W., Aiouache, F., Najdanovic-Visak, V., Termtanun, M., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 28/02/2022, In: International Journal of Energy Research. 46, 2, p. 1646-1658 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  470. Published

    Repurposing of metal support structures to form powder for use in additive manufacturing

    Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  471. Unpublished

    Recycling and reuse of metal powders for various applications in additively manufactured products

    Powell, D., 7/04/2020, (Unpublished) Lancaster University. 176 p.

    Research output: ThesisMaster's Thesis

  472. Published

    Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders

    Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.

    Research output: Contribution to journalJournal articlepeer-review

  473. Published

    Atmospheric hydrodeoxygenation of bio-oil oxygenated model compounds: A review

    Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 08/2018, In: Journal of Analytical and Applied Pyrolysis. 133, p. 117-127 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  474. Published

    Gas-phase hydrodeoxygenation of phenol over Zn/SiO2 catalysts: Effects of zinc load, temperature, weight hourly space velocity, and H 2 volumetric flow rate

    Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 1/07/2020, In: Biomass and Bioenergy. 138, 10 p., 105556.

    Research output: Contribution to journalJournal articlepeer-review

  475. Published

    Catalyst characteristics and performance of silica-supported zinc for hydrodeoxygenation of phenol

    Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A., Aroua, M. K. & Mahlia, T. M. I., 1/06/2020, In: Energies. 13, 11, 13 p., 2802.

    Research output: Contribution to journalJournal articlepeer-review

  476. Published

    Two case studies for applying Model Predictive Controllers on chemical processes

    Pour, N. D., Montazeri, A., Poshtan, J. & Motlahgh, M. R. J., 2007, Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE. New York: IEEE, p. 580-585 6 p. (IEEE Industrial Electronics Society).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  477. Published

    Integration of modelling and conceptual design applied to mechatronics.

    Porter, I., Bradshaw, A., Counsell, J. M. & Nagy, Z., 2002, Proceedings of the mechatronics forum international conference (Mechatronics 2002).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  478. Published

    Schemebuilder mechatronics.

    Porter, I., 1998, Proceedings of the engineering design conference ’98: design reuse. Brunel University, p. 561-568 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  479. Published

    Knowledge representation for mechatronic systems.

    Porter, I., Counsell, J. M. & Shao, J., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 181-196 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  480. Published

    Fission induced by heavy ions: new results from euro g am array

    Porquet, M. G., Azaiez, F., Sharpey-Schafer, J. F., Astier, A., Bastin, G., Beausang, C. W., Bourgeois, C., Clark, R. M., Deloncle, I., Duprat, J., Gall, B. J. P., Hannachi, F., Joyce, M. J., Kaci, M., Korichi, A., Coz, Y. L. E., Meyer, M., Perrin, N., Poffe, N., Redon, N. & 5 others, Schück, C., Sergolle, H., Simpson, J., Smith, A. G. & Wadsworth, R., 1/12/1996, In: Acta Physica Polonica B. 27, 1-2, p. 179-185 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  481. Published

    Two-proton high-K oblate structures in 194Pb

    Porquet, M. G., Hannachi, F., Bastin, G., Brindejonc, V., Deloncle, I., Gall, B., Schuck, C., Smith, A. G., Azaiez, F., Bourgeois, C., Duprat, J., Korichi, A., Perrin, N., Poffe, N., Sergolle, H., Astier, A., Le Coz, Y., Meyer, M., Redon, N., Simpson, J. & 5 others, Sharpey-Schafer, J. F., Joyce, M. J., Beausang, C. W., Wadsworth, R. & Clark, R. M., 1/12/1994, In: Journal of Physics G: Nuclear and Particle Physics. 20, 5, p. 765-773 9 p., 010.

    Research output: Contribution to journalJournal articlepeer-review

  482. Published

    Nonadiabatic switching of a photonic band structure: Ultrastrong light-matter coupling and slow-down of light

    Porer, M., Ménard, J. M., Leitenstorfer, A., Huber, R., Degl'Innocenti, R., Zanotto, S., Biasiol, G., Sorba, L. & Tredicucci, A., 3/02/2012, In: Physical review B. 85, 8, 4 p., 081302.

    Research output: Contribution to journalJournal articlepeer-review

  483. Published

    346 GHz BWO for fusion plasma diagnostics

    Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  484. Published

    Design and fabrication of a sheet beam BWO at 346 GHz

    Popovic, B., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, p. 1-2 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  485. Published

    Electron gun and CVD diamond window for a 346 GHz sheet beam BWO

    Popovic, B., Zheng, Y., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Feng, J., Tang, Y., Gao, M., Zhang, F., Yue, L., Tang, X. & Ting, L., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  486. Published

    Relative response of TL and component-resolved OSL to alpha and beta radiations in annealed sedimentary quartz

    Polymeris, G. S., Afouxenidis, D., Raptis, S., Liritzis, I., Tsirliganis, N. C. & Kitis, G., 10/2011, In: Radiation Measurements. 46, 10, p. 1055-1064 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  487. Published

    The TL and room temperature OSL properties of the glow peak at 110°C in natural milky quartz: a case study

    Polymeris, G. S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 01/2009, In: Radiation Measurements. 44, 1, p. 23-31 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  488. Published

    Thermally assisted OSL from deep traps in Al2O3:C

    Polymeris, G. S., Raptis, S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 03/2010, In: Radiation Measurements. 45, 3-6, p. 519-522 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  489. Published

    UV integrated optics devices based on beta-barium borate

    Poberaj, G., Degl'Innocenti, R., Medrano, C. & Günter, P., 05/2009, In: Optical Materials. 31, 7, p. 1049-1053 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  490. Published

    Neutron and gamma fields at neutron spallation sources for single-event-effects testing

    Platt, S. P., Hong, Q., Mein, S. J. & Zhang, L. H., 28/10/2013, Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS. Institute of Electrical and Electronics Engineers Inc., 4 p. 6937365. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  491. Published

    Fidelity of energy spectra at neutron facilities for single-event effects testing

    Platt, S. P., Prokofiev, A. V. & Xiao, C. X., 20/10/2010, 2010 IEEE International Reliability Physics Symposium, IRPS 2010. IEEE, p. 411-416 6 p. 5488795. (IEEE International Reliability Physics Symposium Proceedings).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  492. Published

    Charge-collection and single-event upset measurements at the ISIS neutron source

    Platt, S., Torok, Z., Frost, C. D. & Ansell, S., 2008, In: IEEE Transactions on Nuclear Science. 55, 4, p. 2126 - 2132 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  493. Published

    Charge-collection and single-event upset measurements at the ISIS neutron source

    Platt, S. P., Torok, Z., Frost, C. D. & Ansell, S., 2007, 6 p. IEEE.

    Research output: Other contribution

  494. Published

    Analysis of SEE-inducing charge generation in the neutron beam at the Svedberg laboratory

    Platt, S. P. & Török, Z., 1/08/2007, In: IEEE Transactions on Nuclear Science. 54, 4, p. 1163-1169 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  495. Published

    Development and application of a neutron sensor for single event effects analysis

    Platt, S. P., Cassels, B. & Torok, Z., 1/01/2005, In: Journal of Physics: Conference Series. 15, 1, p. 172-176 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  496. Published

    Thermal neutron absorption in printed circuit boards

    Platt, S., August, S., MacLeod, M., Anderson, M., Cheneler, D. & Monk, S., 31/03/2021, In: IEEE Transactions on Nuclear Science. 68, 4, p. 463 - 469 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  497. Published

    Producing Useful Chemicals Using a Nuclear Reactor

    Plant, A., Najdanovic, V., Joyce, M., Jazbec, A. & Snoj, L., 20/01/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  498. Published

    Nuclear-driven production of renewable fuel additives from waste organics

    Plant, A. G., Kos, B., Jazbec, A., Snoj, L., Najdanovic-Visak, V. & Joyce, M. J., 17/09/2021, In: Communications Chemistry. 4, 1, 132.

    Research output: Contribution to journalJournal articlepeer-review

  499. Published

    A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging

    Pitman, S. & Hu, J., 11/2013, 2013 Loughborough Antennas & Propagation Conference. Loughborough, UK: IEEE, p. 534-538 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  500. Published

    Optimisation studies for a high gradient proton Linac for application in proton imaging: ProBE: Proton Boosting Linac for imaging and therapy

    Pitman, S., 27/09/2019, Lancaster University. 273 p.

    Research output: ThesisDoctoral Thesis

Previous 1 2 3 4 5 6 7 8 ...11 Next

Back to top