Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    Ultra Capacity Wireless Layer Beyond 100 GHz Based on Millimeter Wave Traveling Wave Tubes

    Paoloni, C., 18/06/2018. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  2. Published
  3. Published

    Technology for D-band/G-band Ultra Capacity Layer

    Paoloni, C., Boppel, S., Krozer, V., Quang, T. L., Letizia, R., Limiti, E., Magne, F., Marilier, M., Ramirez, A., Vidal, B. & Zimmerman, R., 15/08/2019, 2019 European Conference on Networks and Communications (EuCNC). IEEE, p. 209-213 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  4. Published

    Long range millimeter wave wireless links enabled by traveling wave tubes and resonant tunnelling diodes

    Paoloni, C., Basu, R., Billa, L., Mahadev Rao, J., Letizia, R., Ni, Q., Wasige, E., Al-Khalidi, A. & Wang, J., 27/02/2020, 2019 12th UK-Europe-China Workshop on Millimeter Waves and Terahertz Technologies (UCMMT). IEEE, p. 1-3 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Published

    Sub-THz components for high capacity point to multipoint wireless networks

    Paoloni, C., Boppel, S., Krozer, V., Letizia, R., Limiti, E., Magne, F., Marilier, M., Ramirez, A., Vidal, B., Le, T. & Zimmerman, R., 21/10/2019, 2019 44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz). IEEE, 2 p. 8874311

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  6. Published

    Millimeter Wave Traveling Wave Tubes for the 21st Century

    Paoloni, C., Gamzina, D., Letizia, R., Zheng, Y. & Luhmann Jr., N. C., 20/04/2021, In: Journal of Infrared, Millimeter, and Terahertz Waves. 35, 5, p. 567-603 37 p.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    Graphical method for traveling wave amplifier based on the filter theory

    Paoloni, C. & Kosslowsky, S., 1993, 1993 IEEE MTT-S International Microwave Symposium Digest. IEEE, p. 273-276 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  8. Published

    Long-range millimetre wave wireless links enabled by travelling wave tubes and resonant tunnelling diodes

    Paoloni, C., Basu, R., Billa, L., Mahadev Rao, J., Letizia, R., Ni, Q., Wasige, E., Al-Khalidi, A., Wang, J. & Morariu, R., 30/11/2020, In: IET Microwaves, Antennas and Propagation. 14, 15, p. 2110 - 2114 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  9. Published

    D-band point to multi-point deployment with G-band transport

    Paoloni, C., Krozer, V., Magne, F., Le, T., Basu, R., Mahadev Rao, J., Letizia, R., Limiti, E., Marilier, M., Ulisse, G., Ramirez, A., Vidal, B. & Yacob, H., 21/09/2020, 29th European Conference on Networks and Communications, EuCNC 2020. IEEE, p. 84-88 5 p. (European Conference on Networks and Communications (EuCNC); vol. 2020).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  10. Published

    Sub-THz wireless transport layer for ubiquitous high data rate

    Paoloni, C., 31/05/2021, In: IEEE Communications Magazine. 59, 5, p. 102-107 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Enabling Sub-THz Novel Wireless High Capacity Networks by Traveling Wave Tubes

    Paoloni, C., 17/03/2021.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  12. Forthcoming

    Toward the first D-band Point to multipoint wireless system field test

    Paoloni, C., Letizia, R., Mahadev Rao, J., Basu, R., Magne, F., Krozer, V., Ulisse, G., Marilier, M., Ramirez, A., Vidal, B., Limiti, E., Yacob, H., Hossain, M., Huebsch, D., Burhenn, M. & Quang, T. L., 12/04/2021, (Accepted/In press) 2021 Joint EuCNC & 6G Summit. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  13. Published

    D-band Transmission Hub for Point to MultiPoint Wireless Distribution

    Paoloni, C., Letizia, R., Hossain, M., Krozer, V., Quang, T. L., Basu, R., Limiti, E., Magne, F., Marilier, M., Ramirez, A., Mahadev Rao, J., Ulisse, G., Vidal, B. & Yacob, H., 12/01/2020. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  14. Published

    Vacuum Electronic Devices

    Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 317-327 11 p. (Springer Series in Optical Sciences; vol. 234).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  15. Published

    ULTRAWAVE

    Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 423-425 3 p. (Springer Series in Optical Sciences; vol. 234).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  16. Published

    AN APPROACH TO DISTRIBUTED-AMPLIFIER BASED ON A DESIGN-ORIENTED FET MODEL

    PAOLONI, C. & DAGOSTINO, S., 02/1995, In: IEEE Transactions on Microwave Theory and Techniques. 43, 2, p. 272-277 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  17. Published

    New approach on the design of travelling wave amplifier

    PAOLONI, C. & KOBLOWSKI, S., 1992, Proceedings of the 34th Midwest Symposium on Circuits and Systems : the Monterey Sheraton Hotel, Monterey, California, May 14-17, 1991 . Michael, S. (ed.). New York: IEEE, p. 414-417 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  18. Published

    Graphical design method for traveling wave amplifier based on filter theory

    PAOLONI, C. & KOSSLOWSKY, S., 1993, Microwave Symposium Digest, 1993., IEEE MTT-S International. New York: IEEE, p. 273-276 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  19. Published

    Application of filter theory in the design of twas based on FETS with different gate widths

    PAOLONI, C. & KOSSLOWSKY, S., 20/03/1993, In: Microwave and Optical Technology Letters. 6, 4, p. 261-266 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  20. Published

    High spin levels in119Te

    Papadopoulos, C. T., Vlastou, R., Serris, M., Hartas, H. G., Fotiades, N., Kalfas, C. A., Harissopoulos, S., Kossionides, S., Simpson, J., Paul, E. S., Araddad, S., Beausang, C. W., Bentley, M. A., Joyce, M. J. & Sharpey-Schafer, J. F., 1995, In: Zeitschrift für Physik A Hadrons and Nuclei. 352, 3, p. 243-244 2 p.

    Research output: Contribution to journalJournal articlepeer-review

  21. Published

    Electromagnetic sensors for monitoring phase transformations in steel – experimental results and modelling simulations.

    Papaelias, M. P. H., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2002, Proceedings of the TMS conference: modelling the performance of engineering structural materials III.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  22. Published

    On-line detection of phase transformation and effects of microstructural variability in steel using electromagnetic sensors.

    Papaelias, M. P. H., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2002, Proceedings of the metallurgy and materials conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  23. Published

    Detection of phase transformation during steel processing using EM sensors.

    Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of the 1st international seminar in progress in innovative manufacturing engineering (PRIME).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  24. Published

    Effects of microstructural variability on the measurement of ferrite transformation using EM sensors.

    Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of a materials research conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  25. Published

    Measurement of the ferrite-austenite phase balance during transformation in steel using electromagnetic sensors.

    Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of the XVIIth national panhellenic conference in solid state physics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  26. Published

    The use of electromagnetic sensors to monitor temperature during strip steel processing.

    Papaelias, M. P., Davis, C. L., Peyton, A. J., Strangwood, M. & Binns, R., 2000, Proceedings of the XVI panhellenic national conference in solid state physics. Greece

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  27. Published

    Adsorptive behaviour of a novel Ag-4,4-bipyridine metal organic framework thin film tethered to a quartz crystal microbalance

    Papageorgiou, A. & Andrieux, F., 2/11/2021, In: Journal of The Electrochemical Society. 168, 11, 7 p., 117502.

    Research output: Contribution to journalJournal articlepeer-review

  28. Published

    Molecularly imprinted polymers for cholecystokinin C-terminal pentapeptide

    Papaioannou, E., Liakopoulou-Kyriakides, M., Papi, R. M. & Kyriakidis, D. A., 18/12/2007, In: Macromolecular Chemistry and Physics. 208, 24, p. 2621-2627 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  29. Published

    Molecularly imprinted polymers for RGD selective recognition and separation

    Papaioannou, E., Koutsas, C. & Liakopoulou-Kyriakides, M., 03/2009, In: Amino Acids. 36, 3, p. 563-569 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  30. Published

    Artificial receptor for peptide recognition in protic media: the role of metal ion coordination

    Papaioannou, E. H., Liakopoulou-Kyriakides, M., Papi, R. M. & Kyriakidis, D. A., 25/08/2008, In: Materials Science and Engineering: B . 152, 1-3, p. 28-32 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  31. Published

    Effect of biomass pre-treatment and solvent extraction on β-carotene and lycopene recovery from Blakeslea trispora cells

    Papaioannou, E., Roukas, T. & Liakopoulou-Kyriakides, M., 07/2008, In: Preparative Biochemistry and Biotechnology. 38, 3, p. 246-256 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  32. Published

    Raman spectroscopy for intracellular monitoring of carotenoid in blakeslea trispora

    Papaioannou, E. H., Liakopoulou-Kyriakides, M., Christofilos, D., Arvanitidis, I. & Kourouklis, G., 11/2009, In: Applied Biochemistry and Biotechnology. 159, 2, p. 478-487 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  33. Published

    Substrate contribution on carotenoids production in Blakeslea trispora cultivations

    Papaioannou, E. H. & Liakopoulou-Kyriakides, M., 06/2010, In: Food and Bioproducts Processing. 88, 2-3, p. 305-311 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  34. Published

    Substrate contribution on free radical scavenging capacity of carotenoid extracts produced from Blakeslea trispora cultures

    Papaioannou, E. H., Stoforos, N. G. & Liakopoulou-Kyriakides, M., 04/2011, In: World Journal of Microbiology and Biotechnology. 27, 4, p. 851-858 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  35. Published

    Lycopene recovery from tomato peel under mild conditions assisted by enzymatic pre-treatment and non-ionic surfactants

    Papaioannou, E. H. & Karabelas, A. J., 2012, In: Acta Biochimica Polonica. 59, 1, p. 71-74 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  36. Published

    Agro-food wastes utilization by Blakeslea trispora for carotenoids production

    Papaioannou, E. H. & Liakopoulou-Kyriakides, M., 2012, In: Acta Biochimica Polonica. 59, 1, p. 151-153 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  37. Published

    Characterization of condensates from an indirect olive oil pomace drying process: the effect of drying temperature

    Papaioannou, E. H., Patsios, S. I., Karabelas, A. J. & Philippopoulos, N. A., 12/2013, In: Journal of Environmental Chemical Engineering. 1, 4, p. 831-837 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  38. Published

    Natural origin lycopene and its “green” downstream processing

    Papaioannou, E. H., Liakopoulou-Kyriakides, M. & Karabelas, A. J., 11/03/2016, In: Critical Reviews in Food Science and Nutrition. 56, 4, p. 686-709 24 p.

    Research output: Contribution to journalJournal articlepeer-review

  39. Published

    Valorization of pomegranate husk - Integration of extraction with nanofiltration for concentrated polyphenols recovery

    Papaioannou, E., Mitrouli, S., Patsios, S., Kazakli, M. & Karabelas, A., 1/08/2020, In: Journal of Environmental Chemical Engineering. 8, 4, 8 p., 103951.

    Research output: Contribution to journalJournal articlepeer-review

  40. Published

    An artificial neural network approach for the prediction of dynamic viscosity of MXene-palm oil nanofluid using experimental data

    Parashar, N., Aslfattahi, N., Yahya, S. M. & Saidur, R., 2020, In: Journal of Thermal Analysis and Calorimetry.

    Research output: Contribution to journalJournal articlepeer-review

  41. Published

    ANN Modeling of Thermal Conductivity and Viscosity of MXene-Based Aqueous IoNanofluid

    Parashar, N., Aslfattahi, N., Yahya, S. M. & Saidur, R., 11/01/2021, In: International Journal of Thermophysics. 42, 2, 24 p., 24.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    A method for the replacement of 137Cs with 40K as a non-hazardous radioactive tracer for open-source decommissioning research applications

    Parker, A. J., Boxall, C. & Joyce, M., 11/2013, In: Journal of Radioanalytical and Nuclear Chemistry. 298, 2, p. 797-802 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  43. Published

    A thalium-doped sodium iodide well counter for radioactive tracer applications with naturally-abundant 40K

    Parker, A. J., Boxall, C., Joyce, M. & Schotanus, P., 11/09/2013, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 722, p. 5-10 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    A method for the replacement of 137Cs with 40K for open-source ion exchange research applications in hot cells,

    Parker, A. J., Joyce, M. & Boxall, C., 27/09/2012.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  45. Published

    A NaI(Tl) scintillator for in situ environmental studies and laboratory detection measurements of aqueous potassium chloride

    Parker, A. J., Boxall, C., Joyce, M. & Schotanus, P., 12/2012, IEEE Nuclear Science Symposium and Medical Imaging Conference. IEEE, p. 38-43 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  46. Published

    An electrochemical method for the production of graphite oxide

    Parker, A. J., Dickinson, J., Boxall, C. & Joyce, M., 09/2013, In: ECS Transactions. 53, 14, p. 23-32 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    A radioanalytical phantom for assessing the efficacy of electrokinetic decontamination of entrained radioactivity within concrete media

    Parker, A. J., Joyce, M. & Boxall, C., 05/2014, In: Journal of Radioanalytical and Nuclear Chemistry. 300, 2, p. 769-777 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    The use of ionising radiation to image nuclear fuel: a review

    Parker, H. & Joyce, M., 11/2015, In: Progress in Nuclear Energy. 85, p. 297-318 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    Counting neutrons from the spontaneous fission of 238-U using scintillation detectors and mixed field analysers

    Parker, H., Joyce, M. & Jones, A. R., 22/05/2015.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  50. Published

    Radiometric detection of non-radioactive caesium flux using displaced naturally abundant potassium

    Parker, A. J., Joyce, M. J. & Boxall, C., 01/2016, In: Journal of Radioanalytical and Nuclear Chemistry. 307, 1, p. 769-776 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  51. Published

    Active fast neutron singles assay of 235U enrichment in small samples of triuranium octoxide

    Parker, H. M., Aspinall, M., Couture, A., Cave, F. D., Orr, C., Swinson, D. & Joyce, M. J., 11/2016, In: Progress in Nuclear Energy. 93, p. 59-66 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  52. Published

    Remediation of 137Cs Contaminated Concrete Using Electrokinetic Phenomena and Ionic Salt Washes in Nuclear Energy Contexts

    Parker, A. J., Joyce, M. J. & Boxall, C., 15/10/2017, In: Journal of Hazardous Materials. 340, p. 454-462 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  53. Published

    Passive, non-intrusive assay of depleted uranium

    Parker, H. M. & Joyce, M. J., 12/03/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  54. Published

    Passive, non-intrusive assay of depleted uranium

    Parker, H. M., Beaumont, J. & Joyce, M. J., 15/02/2019, In: Journal of Hazardous Materials. 364, p. 293-299 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  55. Published

    Characterizing Corrosion-Born Defects in Oil Pipelines Using Fast-Neutron Elastic Scattering

    Parker, H. M. O., Licata, M., Cave, F. D., Aspinall, M. D., Joyce, M. J., Bandala, M. S., Gerta, D. & Conway, S., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. 8824711

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  56. Published

    Formation of porous natural-synthetic polymer composites using emulsion templating and supercritical fluid assisted impregnation

    Partap, S., Hebb, A. K., Ur Rehman, I. & Darr, J. A., 2007, In: Polymer Bulletin. 58, 5-6, p. 849-860 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  57. Published

    Preparation and characterisation of controlled porosity alginate hydrogels made via a simultaneous micelle templating and internal gelation process

    Partap, S., Muthutantri, A., Rehman, I. U., Davis, G. R. & Darr, J. A., 2007, In: Journal of Materials Science. 42, 10, p. 3502-3507 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    "Supercritical carbon dioxide in water" emulsion-templated synthesis of porous calcium alginate hydrogels

    Partap, S., Rehman, I., Jones, J. R. & Darr, J. A., 2006, In: Advanced Materials. 18, 4, p. 501-504 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  59. Published

    Recovery of platinum group metals from end of life PEMFC

    Patel, A., Harding, A. & Dawson, R., 28/09/2014, In: Chemical Engineering Transactions. 41, p. 43-48 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  60. Published

    Recovery of platinum group metal value via potassium iodide leaching

    Patel, A. & Dawson, R., 10/2015, In: Hydrometallurgy. 157, p. 219-225 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  61. Published

    Structural and physico-chemical analysis of calcium/ strontium substituted, near-invert phosphate based glasses for biomedical applications

    Patel, U., Moss, R. M., Hossain, K. M. Z., Kennedy, A. R., Ahmed, I. & Hannon, A. C., 15/09/2017, In: Acta Biomaterialia. 60, p. 109-127 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  62. Published

    In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration

    Patel, U., Macri-Pellizzeri, L., Zakir Hossain, K. M., Scammell, B. E., Grant, D. M., Scotchford, C. A., Hannon, A. C., Kennedy, A. R., Barney, E. R., Ahmed, I. & Sottile, V., 1/03/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 396-405 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Green process engineering as the key to future processes

    Patel, D., Kellici, S. & Saha, B., 19/03/2014, In: Processes. 2, 1, p. 311-332 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  64. Published

    Growth Determinants of the Small Hydropower Sector.

    Pates, W., Aggidis, G. A. & Panagopoulos, A., 09/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  65. Published

    A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures

    Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  66. Published

    Encapsulation of the peptide Ac-Glu-Thr-Lys-Thr-Tyr-Phe-Trp-Lys-NH 2 into polyvinyl alcohol biodegradable formulations: effect of calcium alginate

    Patsialas, K., Papaioannou, E. H. & Liakopoulou-Kyriakides, M., 15/01/2012, In: Carbohydrate Polymers. 87, 2, p. 1112-1118 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  67. Published

    Long-term performance of a membrane bioreactor treating table olive processing wastewater

    Patsios, S. I., Papaioannou, E. H. & Karabelas, A. J., 1/08/2016, In: Journal of Chemical Technology and Biotechnology. 91, 8, p. 2253-2262 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  68. Published

    Design approach for the development of a cryomodule for compact crab cavities for Hi-Lumi LHC

    Pattalwar, S., Jones, T., Templeton, N., Goudket, P., McIntosh, P. A., Wheelhouse, A., Burt, G. C., Hall, B., Wright, L. & Peterson, T., 29/01/2014, In: AIP Conference Proceedings. 1573, 1, p. 795-802 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  69. Published

    Hybrid Phototransistors-based on Dye-functionalised ZnO Semiconducting Channels

    Pattanasattayavong, P., Thomas, S., Adamopoulos, G., Labram, J. & Anthopoulos, T., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  70. Published

    p-channel thin-film transistors based on spray-coated Cu2O films

    Pattanasattayavong, P., Thomas, S., Adamopoulos, G., McLachlan, M. A. & Anthopoulos, T. D., 22/04/2013, In: Applied Physics Letters. 102, 16, 4 p., 163505.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    The Use of Wavelength-selective Plastic Cladding Materials in Horticulture: Understanding of Crop and Fungal Responses Through the Assessment of Biological Spectral Weighting Functions.

    Paul, N. D., Jacobson, R. J., Taylor, A., Wargent, J. J. & Moore, J. P., 09/2005, In: Photochemistry and Photobiology. 81, 5, p. 1052-1060 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  72. Published

    Deformed intruder band in Te112: First evidence for rotational behavior in the tellurium isotopes

    Paul, E. S., Beausang, C. W., Forbes, S. A., Gale, S. J., James, A. N., Jones, P. M., Joyce, M. J., Andrews, H. R., Janzen, V. P., Radford, D. C., Ward, D., Clark, R. M., Hauschild, K., Hibbert, I. M., Wadsworth, R., Cunningham, R. A., Simpson, J., Davinson, T., Page, R. D., Sellin, P. J. & 10 others, Woods, P. J., Fossan, D. B., LaFosse, D. R., Schnare, H., Waring, M. P., Gizon, A., Gizon, J., Drake, T. E., DeGraaf, J. & Pilotte, S., 1994, In: Physical Review C. 50, p. 698-706 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  73. Published

    Deformed intruder band in I113

    Paul, E. S., Beausang, C. W., Forbes, S. A., Gale, S. J., James, A. N., Jones, P. M., Joyce, M. J., Clark, R. M., Hauschild, K., Hibbert, I. M., Wadsworth, R., Cunningham, R. A., Simpson, J., Davinson, T., Page, R. D., Sellin, P. J., Woods, P. J., Fossan, D. B., Lafosse, D. R., Schnare, H. & 3 others, Waring, M. P., Gizon, A. & Gizon, J., 1993, In: Physical Review C. 48, p. 490-493 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  74. Published

    The high-spin single-particle structure of 121I

    Paul, E. S., Simpson, J., Araddad, S., Beausang, C. W., Bentley, M. A., Joyce, M. J. & Sharpey-Schafer, J. F., 1993, In: Journal of Physics G: Nuclear and Particle Physics. 19, 6, p. 913-919 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  75. Published

    High negative bias stress stability of metal oxide-based TFTs employing tungsten-doped Indium Oxide semiconducting channels

    Paxinos, K., Milne, W. I. & Adamopoulos, G., 23/05/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  76. Published

    Thin film transistors based on solution-processed In2O3:W. A remarkably stable semiconductor under high negative bias stress

    Paxinos, K., Milne, W. I. & Adamopoulos, G., 15/10/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  77. Published

    Neutron/gamma pulse shape discrimination in EJ-299-34 at high flux

    Payne, C., Sellin, P., Ellis, M., Duroe, K., Jones, A. R., Joyce, M. J., Randall, G. & Speller, R., 31/10/2015, 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, p. 1-5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  78. Published

    Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension

    Pazooki, A., Cao, D., Rakheja, S. & Boileau, P-E., 2011, In: Vehicle System Dynamics. 49, 9, p. 1455-1476 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  79. Published

    Experimental and analytical evaluations of a torsio-elastic suspension for off-road vehicles

    Pazooki, A., Cao, D., Rakheja, S. & Boileau, P-E., 2010, In: SAE International Journal of Materials and Manufacturing. 3, 1, p. 326-338 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  80. Published

    Modelling and validation of off-road vehicle ride dynamics

    Pazooki, A., Rakheja, S. & Cao, D., 04/2012, In: Mechanical Systems and Signal Processing. 28, p. 679-695 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  81. Published

    Kineto-dynamic directional response analysis of an articulated frame steer vehicle

    Pazooki, A., Rakheja, S. & Cao, D., 2014, In: International Journal of Vehicle Design. 65, 1, p. 1-30 30 p.

    Research output: Contribution to journalJournal articlepeer-review

  82. Published

    A three-dimensional model of an articulated frame-steer vehicle for coupled ride and handling dynamic analyses

    Pazooki, A., Rakheja, S. & Cao, D., 2014, In: International Journal of Vehicle Performance. 1, 3-4, p. 264-297 34 p.

    Research output: Contribution to journalJournal articlepeer-review

  83. Published

    Effect of terrain roughness on the roll and yaw directional stability of an articulated frame steer vehicle

    Pazooki, A., Rakheja, S. & Cao, D., 2013, In: SAE International Journal of Commercial Vehicles. 6, 2, p. 325-339 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  84. Published

    Measurement of field-emission induced optical emission spectra

    Peacock, R., Wuensch, W. & Burt, G., 22/09/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  85. Published

    System identification, time series analysis and forecasting: The Captain Toolbox handbook.

    Pedregal, D. J., Taylor, C. J. & Young, P. C., 2007, Lancaster: Lancaster University. 273 p.

    Research output: Book/Report/ProceedingsOther report

  86. Published

    A quantitative comparison of in-line coating thickness distributions obtained from a pharmaceutical tablet mixing process using discrete element method and terahertz pulsed imaging

    Pei, C., Lin, H., Markl, D., Shen, Y., Zeitler, J. A. & Elliott, J. A., 31/12/2018, In: Chemical Engineering Science. 192, p. 34-45 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  87. Published

    Micro-optical ring electrode: Development of a novel electrode for photoelectrochemistry

    Pennarun, G. I., Boxall, C. & OHare, D., 12/1996, In: Analyst. 121, 12, p. 1779-1788 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  88. Published

    The micro-optical ring electrode: Development of a novel electrode for photoelectrochemistry

    Pennarun, G. I., Boxall, C. & OHare, D., 1997, Proceedings of the Symposium on Chemical and Biological Sensors and Analytical Electrochemical Methods. Ricco, AJ., Vanyek, P., Horvai, G. & Silva, AF. (eds.). PENNINGTON: ELECTROCHEMICAL SOCIETY INC, p. 1039-1051 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  89. Published

    The electron accelerator for the AWAKE experiment at CERN

    Pepitone, K., Doebert, S., Burt, G. C., Chevallay, E., Chritin, N., Delory, C., Fedosseev, V., Hessler, C., McMonagle, G., Mete, O., Verzilov, V. & Apsimon, R. J., 1/09/2016, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 829, p. 73-75 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  90. Published

    The electron accelerators for the AWAKE experiment at CERN—Baseline and Future Developments

    Pepitone, K., Doebert, S., Apsimon, R. J., Bauche, J., Bernardini, M., Bracco, C., Burt, G., Chauchet, A., Chevallay, E., Chritin, N., Curt, S., Damerau, H., Kelisani, M. D., Delory, C., Fedosseev, V., Friebel, F., Galleazzi, F., Gorgisyan, I., Gschwendtner, E., Hansen, J. & 15 others, Jensen, L., Keeble, F., Maricalva, L., Mazzoni, S., McMonagle, G., Mete, O., Pardons, A., Pasquino, C., Verzilov, V., Schmidt, J. S., Soby, L., Williamson, B., Yamakawa, E., Pitman, S. & Mitchell, J., 12/11/2018, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 909, p. 102-106 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  91. Published

    Selective hydrogenation of benzoic acid over Au supported on CeO2 and Ce0.62Zr0.38O2: Formation of benzyl alcohol

    Perret, N., Wang, X., Delgado, J. J., Blanco, G., Chen, X., Olmos, C. M., Bernal, S. & Keane, M. A., 1/08/2014, In: Journal of Catalysis. 317, p. 114-125 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  92. Published

    Selectivity in the gas-phase hydrogenation of 4-nitrobenzaldehyde over supported Au catalysts

    Perret, N., Wang, X., Onfroy, T., Calers, C. & Keane, M. A., 1/01/2014, In: Journal of Catalysis. 309, p. 333-342 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  93. Published

    Enhanced selective nitroarene hydrogenation over Au supported on beta-Mo2C and beta-Mo2C/Al2O3

    Perret, N., Wang, X., Delannoy, L., Potvin, C., Louis, C. & Keane, M. A., 2012, In: Journal of Catalysis. 286, p. 172-183 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  94. Published

    A submillimetre wave extended interaction oscillator with novel broadband mechanical tuning

    Perring, D., Phillips, G. & Carter, R. G., 1/12/1990, International Technical Digest on Electron Devices. IEEE, p. 897-900 4 p. (Technical Digest - International Electron Devices Meeting).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  95. Published

    Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures

    Perry, M., Saafi, M., Fusiek, G. & Niewczas, P., 24/02/2015, In: Smart Materials and Structures. 24, 4, 8 p., 045011.

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    Wireless surface acoustic wave sensors for displacement and crack monitoring in concrete structures

    Perry, M., McKeeman, I., Saafi, M. B. S. & Niewczas, P., 22/02/2016, In: Smart Materials and Structures. 25, 3, 9 p., 035035.

    Research output: Contribution to journalJournal articlepeer-review

  97. Published

    Process design of biodiesel production: Hybridization of ester-and transesterification in a single reactive distillation

    Petchsoongsakul, N., Ngaosuwan, K., Kiatkittipong, W., Aiouache, F. & Assabumrungrat, S., 1/12/2017, In: Energy Conversion and Management. 153, p. 493-503 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  98. Published

    Radar Altimetry as a Robust Tool for Monitoring the Active Lava Lake at Erebus Volcano, Antarctica

    Peters, N. J., Oppenheimer, C., Brennan, P., Lok, L. B., Ash, M. & Kyle, P., 16/09/2018, In: Geophysical Research Letters. 45, 17, p. 8897-8904 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  99. Published

    Swansea Bay tidal lagoon annual energy estimation

    Petley, S. & Aggidis, G., 1/01/2016, In: Ocean Engineering. 111, p. 348-357 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  100. Published

    Investigating the influence of the jet from three nozzle and spear design configurations on Pelton runner performance by numerical simulation

    Petley, S., Panagiotopoulos, A., Benzon, S., Zidonis, A., Aggidis, G. A., Anagnostopoulos, I. & Papantonis, D., 17/09/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  101. Published

    Transient CFD and experimental analysis for improved Pelton turbine casing designs

    Petley, S. & Aggidis, G. A., 17/09/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  102. Published

    Out with the old, in with the new: Pelton hydro turbine performance influence utilising three different injector geometries

    Petley, S., Zidonis, A., Panagiotopoulos, A., Benzon, S., Aggidis, G. A., Anagnostopoulos, I. & Papantonis, D., 30/01/2019, In: Journal of Fluids Engineering. 141, 8, 14 p., 081103.

    Research output: Contribution to journalJournal articlepeer-review

  103. Published

    Numerical and experimental investigation of flow in horizontal axis Pelton turbines

    Petley, S., 2019, Lancaster University. 293 p.

    Research output: ThesisDoctoral Thesis

  104. Published

    Transient CFD and experimental analysis for improved Pelton turbine casing designs

    Petley, S. & Aggidis, G. A., 28/03/2019, In: IOP Conf. Series: Earth and Environmental Science. 240, 11 p., 022005.

    Research output: Contribution to journalJournal articlepeer-review

  105. Published

    Investigating the influence of the jet from three nozzle and spear design configurations on Pelton runner performance by numerical simulation

    Petley, S., Panagiotopoulos, A., Benzon, D. S., Zidonis, A., Aggidis, G. A., Anagnostopoulos, J. & Papantonis, D., 28/03/2019, In: IOP Conf. Series: Earth and Environmental Science. 240, 11 p., 022004.

    Research output: Contribution to journalJournal articlepeer-review

  106. Published

    Opportunities for tidal range projects beyond energy generation: using Mersey barrage as a case study

    Petley, S., Starr, D., Underwood, Z., Parish, L. & Aggidis, G., 1/12/2019, In: Frontiers of Architectural Research. 8, 4, p. 620-633 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  107. Published

    Estimating the Energy Loss in Pelton Turbine Casings by Transient CFD and Experimental Analysis

    Petley, S. & Aggidis, G., 26/12/2019, In: International Journal of Fluid Machinery and Systems. 12, 4, p. 400-417 18 p., O19059S.

    Research output: Contribution to journalJournal articlepeer-review

  108. Published

    Simulation of a THz vacuum triode using carbon-nanotube emitter

    Petrolati, E., Paoloni, C. & Di Carlo, A., 2006, 2006 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE HELD JOINTLY WITH 2006 IEEE INTERNATIONAL VACUUM ELECTRON SOURCES. NEW YORK: IEEE, p. 197-198 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  109. Published

    The development of a novel scanner to measure human composition.

    Peyton, A. J., Tapp, H. S., Ktistis, C., Mackin, R. O., Wan-Daud, W. A., Goss, D. & Crescenzo, E., 2004, Proceedings of the XII international conference on electrical bio-impedance.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  110. Published

    Electromagnetic imaging and tomography – a review of recent advances.

    Peyton, A. J., Dickinson, S. J., Lionheart, W. R. B., Soleimani, M. & Pritchard, W. D. N., 2003, Proceedings of the institute of materials conference on on-line measurements for quality in the metals industry.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  111. Published

    Addressing the difficulties in using inductive methods to evaluating human body composition.

    Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, In: Biométrie Humaine et Anthropologie. 21, p. 69-77 9 p.

    Research output: Contribution to journalJournal article

  112. Published

    Addressing the difficulties in using inductive methods to evaluating human body composition.

    Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, Proceedings of the international conference on robotics, vision, information and signal processing (ROVISP 2003).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  113. Published

    The development of high frequency electromagnetic inductance tomography for low conductivity materials.

    Peyton, A. J., Mackin, R. O., Goss, D., Crescenzo, E. & Tapp, H. S., 2002, Proceedings of the 2nd international symposium on process tomography.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  114. Published

    Addressing the difficulties in using inductive methods to evaluating human body composition.

    Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2002, Proceedings of the 9th symposium of the société de biométrie humaine.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  115. Published

    Development of electromagnetic tomography (EMT) for industrial applications: part 1: sensor design and instrumentation

    Peyton, A. J., Borges, A. R., Oliveira, E., Lyon, G. M. & Yu, Z. Z., 1999, Proceedings of the world congress on industrial process tomography. Buxton

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  116. Published

    An overview of electromagnetic inductance tomography: description of three different systems.

    Peyton, A. J., Yu, Z. Z. & Lyon, G., 1996, In: Measurement Science and Technology. 7, p. 261-271 11 p.

    Research output: Contribution to journalJournal article

  117. Published

    Non Contact Cable Testing

    Peyton, A., Coulton, P., Mackin, R. & John, K., 27/04/2010, Patent No. US7705606

    Research output: Patent

  118. Published

    Atomic composition tomography using pulsed fast neutron analysis

    Peyton, A. J., Aspinall, M., D'Mellow, B., Mackin, R. O. & Joyce, M. J., 2007, Proceedings of 5th World Congress on Industrial Process Tomography : Bergen, Norway, 3rd to 6th September, 2007.. Virtual Centre for Industrial Process Tomography

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  119. Published

    High-speed, in-band performance measurement instrumentation for next generation IP networks

    Pezaros, D. P., Georgopoulos, K. & Hutchison, D., 2010, In: Computer Networks. 54, 18, p. 3246-3263 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  120. Published

    A 3D BEM modelling of body-scanning MIT system.

    Pham, M. . H. & Peyton, A. J., 2004, Proceedings of the XII international conference on electrical bio-impedance.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  121. Published

    Surface modification of bioceramics by grafting of tailored allyl phosphonic acid

    Phillips, M. J., Duncanson, P., Wilson, K., Darr, J. A., Griffiths, D. V. & Rehman, I., 2005, In: Advances in Applied Ceramics. 104, 5, p. 261-267 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  122. Published

    Synthesis and characterization of nano-biomaterials with potential osteological applications

    Phillips, M. J., Darr, J. A., Luklinska, Z. B. & Rehman, I., 2003, In: Journal of Materials Science: Materials in Medicine. 14, 10, p. 875-882 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  123. Published

    Dissolved organic carbon and biodegradable dissolved organic carbon determination in river water of the Strug Basin

    Piech, A., Trzyna, K., Skwarczynska-Wojsa, A. L. & Douglas, T., 31/03/2019, In: JOURNAL OF CIVIL ENGINEERING, ENVIRONMENT AND ARCHITECTURE. 36, 1, p. 27-35 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  124. Published

    Social Design Fiction. New Methods for the Design of Emerging Technology.

    Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  125. Published

    Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  126. Published

    Component repair using laser direct metal deposition

    Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  127. Published

    Theoretical analysis of the coincident wire-powder laser deposition process

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  128. Published

    An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition

    Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  129. Published

    Thermal and microstructural aspects of the laser direct metal deposition of waspaloy

    Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  130. Published

    An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  131. Published

    Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them

    Pinkerton, A. J. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 175-181 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  132. Published

    Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders

    Pinkerton, A. J. & Li, L., 2005, In: International Journal of Advanced Manufacturing Technology. 25, 5-6, p. 471-479 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  133. Published

    An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition

    Pinkerton, A. J. & Li, L., 2005, In: Journal of Laser Applications. 17, 1, p. 47-56 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  134. Published

    Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances

    Pinkerton, A. J. & Li, L., 21/07/2004, In: Journal of Physics D: Applied Physics. 37, 14, p. 1885-1895 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  135. Published

    The development of temperature fields and powder flow during laser direct metal deposition wall growth

    Pinkerton, A. J. & Li, L., 05/2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 5, p. 531-541 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  136. Published

    An analytical model of energy distribution in laser direct metal deposition

    Pinkerton, A. J. & Li, L., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 4, p. 363-374 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  137. Published

    Multiple-layer cladding of stainless steel using a high-powered diode laser: an experimental investigation of the process characteristics and material properties

    Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 471-476 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  138. Published

    The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication

    Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 600-605 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  139. Published

    Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling

    Pinkerton, A. J. & Li, L., 02/2004, In: Journal of Manufacturing Science and Engineering. 126, 1, p. 33-41 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  140. Published

    The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)

    Pinkerton, A. J. & Li, L., 05/2004, In: International Journal of Machine Tools and Manufacture. 44, 6, p. 573-584 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  141. Published

    Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling

    Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  142. Published

    Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping

    Pinkerton, A. J. & Li, L., 2003, In: CIRP Annals - Manufacturing Technology. 52, 1, p. 181-184 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  143. Published

    Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate

    Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  144. Published

    An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel

    Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  145. Published

    The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish

    Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  146. Published

    Guest Editorial: The 36th MATADOR Conference 2010

    Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.

    Research output: Contribution to journalEditorialpeer-review

  147. Published

    Laser and electron beams - evolving tools for surface engineering

    Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.

    Research output: Contribution to journalEditorialpeer-review

  148. Published

    Laser rapid manufacturing process advancement through powder morphology

    Pinkerton, A. J., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  149. Published

    A method and model for pulsed laser cleaning of rapid manufactured parts

    Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  150. Published

    Direct laser deposition layer profiles and the factors affecting them

    Pinkerton, A. J. & Li, L., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  151. Published

    A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  152. Published

    A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  153. Published

    The effect of diode laser beam shape and traverse direction on the direct metal deposition process

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  154. Published

    Direct metal deposition by diode laser: modelling the effect of increased beam coupling

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  155. Published

    Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  156. Published

    The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process

    Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  157. Published

    Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle

    Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  158. Published

    Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)

    Pinkerton, A. J., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  159. Published

    Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology

    Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  160. Published

    An analytical model of the combined powder-wire deposition process

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  161. Published

    A verified model of laser direct metal deposition using an analytical enthalpy balance method

    Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  162. Published

    Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition

    Pinkerton, A. J., Kamara, A. M., Shah, K., Safdar, S. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 369-374 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  163. Published

    Direct laser deposited titanium with controlled porosity for bone tissue engineering

    Pinkerton, A. J., Paul, C. P., Iravani-Tabrizipoor, M., Kukreja, L. M. & Khajepour, A., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 421-430 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  164. Published

    Laser direct metal deposition: theory and applications in manufacturing and maintenance

    Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  165. Published

    Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications

    Pinkerton, A. J., Ahsan, M. N., Paul, C. P. & Kukreja, L. M., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  166. Published
  167. Published

    Advances in the modelling of laser direct metal deposition (invited)

    Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.

    Research output: Contribution to journalJournal articlepeer-review

  168. Published

    Lasers in additive manufacturing

    Pinkerton, A. J., 04/2016, In: Optics and Laser Technology. 78, Part A, p. 25-32 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  169. Published

    FDTD analysis of nonlinear bragg grating based devices

    Pinto, D., Obayya, S., Rahman, B. & Grattan, K., 12/2006, In: Optical and Quantum Electronics. 38, 15, p. 1217-1235 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  170. Published

    Improved complex envelope alternative direction implicit finite difference time domain method for photonic bandgap cavities

    Pinto, D. & Obayya, S., 01/2007, In: Journal of Lightwave Technology. 25, 1, p. 440-447 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  171. Published

    Accurate perfectly matched layer finite-volume time-domain method for photonic bandgap devices

    Pinto, D. & Obayya, S., 03/2008, In: IEEE Photonics Technology Letters. 20, 5, p. 339-341 3 p.

    Research output: Contribution to journalLetterpeer-review

  172. Published

    Nonlinear finite-volume time-domain analysis of photonic crystal-based resonant cavities

    Pinto, D. & Obayya, S., 2008, In: IET Optoelectronics. 2, 6, p. 254-261 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  173. Published

    2D Analysis of Multimode Photonic Crystal Resonant Cavities with the Finite Volume Time Domain Method

    Pinto, D. & Obayya, S., 2008, In: Optical and Quantum Electronics. 40, 11-12, p. 875-890 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  174. Published

    Accurate finite element time domain modelling of resonant photonic bandgap cavities

    Pinto, D. & Obayya, S., 2005. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  175. Published

    Complex envelope alternating direction implicit finite difference time domain method for photonic bandgap structures

    Pinto, D. & Obayya, S., 2006. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  176. Published

    Time-domain modelling of nonlinear optical waveguides

    Pinto, D. & Obayya, S., 2006. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  177. Published

    New Alternating-Direction-Implicit Finite-Difference-Time-Domain Method for Photonic Crystal Devices

    Pinto, D. & Obayya, S., 2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  178. Published

    Novel Time Domain Technique for Photonic Bandgap Resonant Cavities

    Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  179. Published

    Finite Volume Time Domain Analysis of Nonlinear Photonic Crystal Devices

    Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  180. Published

    Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices

    Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  181. Published

    Evaluation of performance and operation viability of non-uniform potential solid oxide fuel cell fueled by reformed methane

    Piroonlerkgul, P., Kiatkittipong, W., Wongsakulphasatch, S., Aiouache, F. & Assabumrungrat, S., 15/01/2014, In: Journal of Power Sources. 246, p. 719–728 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  182. Published

    A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging

    Pitman, S. & Hu, J., 11/2013, 2013 Loughborough Antennas & Propagation Conference. Loughborough, UK: IEEE, p. 534-538 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  183. Published

    Optimisation studies for a high gradient proton Linac for application in proton imaging: ProBE: Proton Boosting Linac for imaging and therapy

    Pitman, S., 27/09/2019, Lancaster University. 273 p.

    Research output: ThesisDoctoral Thesis

  184. Published

    Producing Useful Chemicals Using a Nuclear Reactor

    Plant, A., Najdanovic, V., Joyce, M., Jazbec, A. & Snoj, L., 20/01/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  185. Published

    Nuclear-driven production of renewable fuel additives from waste organics

    Plant, A. G., Kos, B., Jazbec, A., Snoj, L., Najdanovic-Visak, V. & Joyce, M. J., 17/09/2021, In: Communications Chemistry. 4, 1, 132.

    Research output: Contribution to journalJournal articlepeer-review

  186. Published

    Neutron and gamma fields at neutron spallation sources for single-event-effects testing

    Platt, S. P., Hong, Q., Mein, S. J. & Zhang, L. H., 28/10/2013, Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS. Institute of Electrical and Electronics Engineers Inc., 4 p. 6937365. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  187. Published

    Fidelity of energy spectra at neutron facilities for single-event effects testing

    Platt, S. P., Prokofiev, A. V. & Xiao, C. X., 20/10/2010, 2010 IEEE International Reliability Physics Symposium, IRPS 2010. IEEE, p. 411-416 6 p. 5488795. (IEEE International Reliability Physics Symposium Proceedings).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  188. Published

    Charge-collection and single-event upset measurements at the ISIS neutron source

    Platt, S., Torok, Z., Frost, C. D. & Ansell, S., 2008, In: IEEE Transactions on Nuclear Science. 55, 4, p. 2126 - 2132 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  189. Published

    Charge-collection and single-event upset measurements at the ISIS neutron source

    Platt, S. P., Torok, Z., Frost, C. D. & Ansell, S., 2007, 6 p. IEEE.

    Research output: Other contribution

  190. Published

    Analysis of SEE-inducing charge generation in the neutron beam at the Svedberg laboratory

    Platt, S. P. & Török, Z., 1/08/2007, In: IEEE Transactions on Nuclear Science. 54, 4, p. 1163-1169 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  191. Published

    Development and application of a neutron sensor for single event effects analysis

    Platt, S. P., Cassels, B. & Torok, Z., 1/01/2005, In: Journal of Physics: Conference Series. 15, 1, p. 172-176 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  192. Published

    Thermal neutron absorption in printed circuit boards

    Platt, S., August, S., MacLeod, M., Anderson, M., Cheneler, D. & Monk, S., 31/03/2021, In: IEEE Transactions on Nuclear Science. 68, 4, p. 463 - 469 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  193. Published

    UV integrated optics devices based on beta-barium borate

    Poberaj, G., Degl'Innocenti, R., Medrano, C. & Günter, P., 05/2009, In: Optical Materials. 31, 7, p. 1049-1053 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  194. Published

    Relative response of TL and component-resolved OSL to alpha and beta radiations in annealed sedimentary quartz

    Polymeris, G. S., Afouxenidis, D., Raptis, S., Liritzis, I., Tsirliganis, N. C. & Kitis, G., 10/2011, In: Radiation Measurements. 46, 10, p. 1055-1064 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  195. Published

    The TL and room temperature OSL properties of the glow peak at 110°C in natural milky quartz: a case study

    Polymeris, G. S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 01/2009, In: Radiation Measurements. 44, 1, p. 23-31 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  196. Published

    Thermally assisted OSL from deep traps in Al2O3:C

    Polymeris, G. S., Raptis, S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 03/2010, In: Radiation Measurements. 45, 3-6, p. 519-522 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  197. Published

    346 GHz BWO for fusion plasma diagnostics

    Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  198. Published

    Design and fabrication of a sheet beam BWO at 346 GHz

    Popovic, B., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, p. 1-2 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  199. Published

    Electron gun and CVD diamond window for a 346 GHz sheet beam BWO

    Popovic, B., Zheng, Y., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Feng, J., Tang, Y., Gao, M., Zhang, F., Yue, L., Tang, X. & Ting, L., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  200. Published

    Nonadiabatic switching of a photonic band structure: Ultrastrong light-matter coupling and slow-down of light

    Porer, M., Ménard, J. M., Leitenstorfer, A., Huber, R., Degl'Innocenti, R., Zanotto, S., Biasiol, G., Sorba, L. & Tredicucci, A., 3/02/2012, In: Physical review B. 85, 8, 4 p., 081302.

    Research output: Contribution to journalJournal articlepeer-review

  201. Published

    Fission induced by heavy ions: new results from euro g am array

    Porquet, M. G., Azaiez, F., Sharpey-Schafer, J. F., Astier, A., Bastin, G., Beausang, C. W., Bourgeois, C., Clark, R. M., Deloncle, I., Duprat, J., Gall, B. J. P., Hannachi, F., Joyce, M. J., Kaci, M., Korichi, A., Coz, Y. L. E., Meyer, M., Perrin, N., Poffe, N., Redon, N. & 5 others, Schück, C., Sergolle, H., Simpson, J., Smith, A. G. & Wadsworth, R., 1/12/1996, In: Acta Physica Polonica B. 27, 1-2, p. 179-185 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  202. Published

    Two-proton high-K oblate structures in 194Pb

    Porquet, M. G., Hannachi, F., Bastin, G., Brindejonc, V., Deloncle, I., Gall, B., Schuck, C., Smith, A. G., Azaiez, F., Bourgeois, C., Duprat, J., Korichi, A., Perrin, N., Poffe, N., Sergolle, H., Astier, A., Le Coz, Y., Meyer, M., Redon, N., Simpson, J. & 5 others, Sharpey-Schafer, J. F., Joyce, M. J., Beausang, C. W., Wadsworth, R. & Clark, R. M., 1/12/1994, In: Journal of Physics G: Nuclear and Particle Physics. 20, 5, p. 765-773 9 p., 010.

    Research output: Contribution to journalJournal articlepeer-review

  203. Published

    Integration of modelling and conceptual design applied to mechatronics.

    Porter, I., Bradshaw, A., Counsell, J. M. & Nagy, Z., 2002, Proceedings of the mechatronics forum international conference (Mechatronics 2002).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  204. Published

    Schemebuilder mechatronics.

    Porter, I., 1998, Proceedings of the engineering design conference ’98: design reuse. Brunel University, p. 561-568 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  205. Published

    Knowledge representation for mechatronic systems.

    Porter, I., Counsell, J. M. & Shao, J., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 181-196 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  206. Published

    Two case studies for applying Model Predictive Controllers on chemical processes

    Pour, N. D., Montazeri, A., Poshtan, J. & Motlahgh, M. R. J., 2007, Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE. New York: IEEE, p. 580-585 6 p. (IEEE Industrial Electronics Society).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  207. Published

    Atmospheric hydrodeoxygenation of bio-oil oxygenated model compounds: A review

    Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 08/2018, In: Journal of Analytical and Applied Pyrolysis. 133, p. 117-127 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  208. Published

    Gas-phase hydrodeoxygenation of phenol over Zn/SiO2 catalysts: Effects of zinc load, temperature, weight hourly space velocity, and H 2 volumetric flow rate

    Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 1/07/2020, In: Biomass and Bioenergy. 138, 10 p., 105556.

    Research output: Contribution to journalJournal articlepeer-review

  209. Published

    Catalyst characteristics and performance of silica-supported zinc for hydrodeoxygenation of phenol

    Pourzolfaghar, H., Abnisa, F., Wan Daud, W. M. A., Aroua, M. K. & Mahlia, T. M. I., 1/06/2020, In: Energies. 13, 11, 13 p., 2802.

    Research output: Contribution to journalJournal articlepeer-review

  210. Published

    Repurposing of metal support structures to form powder for use in additive manufacturing

    Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  211. Unpublished

    Recycling and reuse of metal powders for various applications in additively manufactured products

    Powell, D., 7/04/2020, (Unpublished) Lancaster University. 176 p.

    Research output: ThesisMaster's Thesis

  212. Published

    Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders

    Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.

    Research output: Contribution to journalJournal articlepeer-review

  213. Published

    Liquid-liquid phase equilibria of aqueous biphasic systems based on glycerol formal: Application on tetracycline recovery from water

    Praikaew, W., Kiatkittipong, W., Kiatkittipong, K., Assabumrungrat, S., Aiouache, F. & Najdanovic-Visak, V., 1/11/2019, In: Journal of Chemical and Engineering Data. 64, 11, p. 4856-4862 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  214. Published

    Process and Energy Intensification of Glycerol Carbonate Production from Glycerol and Dimethyl Carbonate in the Presence of Eggshell-Derived CaO Heterogeneous Catalyst

    Praikaew, W., Kiatkittipong, W., Aiouache, F., Najdanovic-Visak, V., Ngaosuwan, K., Wongsawaeng, D., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 14/07/2021, In: Energies. 14, 14, 15 p., 4249.

    Research output: Contribution to journalJournal articlepeer-review

  215. E-pub ahead of print

    Mechanism of CaO catalyst deactivation with unconventional monitoring method for glycerol carbonate production via transesterification of glycerol with dimethyl carbonate

    Praikaew, W., Kiatkittipong, W., Aiouache, F., Najdanovic-Visak, V., Termtanun, M., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 15/09/2021, In: International Journal of Energy Research.

    Research output: Contribution to journalJournal articlepeer-review

  216. Published

    Stress-induced curvature of focused ion beam fabricated microcantilevers

    Prewett, P. D., Anthony, C. J., Cheneler, D. & Ward, M. C. L., 8/04/2008, In: Micro and Nano Letters. 3, 1, p. 25-28 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  217. Published

    Novel developments in the MOSFET dosemeter for neutron dosimetry applications

    Price, R. A., Benson, C., Joyce, M. J., Kestell, D. J. & Silvie, J., 2004, In: Radiation Protection Dosimetry. 110, 1-4, p. 283-290 8 p.

    Research output: Contribution to journalJournal article

  218. Published

    Development of a linear array for intracavitary in vivo dosimetry during external beam radiotherapy and brachytherapy.

    Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2004, In: IEEE Transactions on Nuclear Science. 51, 4, p. 1420-1426 7 p., 8076167 .

    Research output: Contribution to journalJournal articlepeer-review

  219. Published

    Development of a linear array for intracavatary in vivo dosimetry during external beam radiotherapy and brachytherapy.

    Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2003, Proceedings of the nuclear science symposium, medical imaging conference: 13th international workshop on room temperature semiconductor X- and gamma-ray detectors.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  220. Published

    Novel developments in the MOSFET for neutron radiation dosimetry applications

    Price, R. A., Kestell, D. J., Stevens, D. L., Jaksic, A., Silvie, J. & Joyce, M. J., 2003, Proceedings of the 9th neutron dosimetry symposium.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  221. Published

    Data-Based Mechanistic Modelling (DBM) and control of mass and energy transfer in agricultural buildings

    Price, L., Young, P. C., Berckmans, D., Janssens, K. & Taylor, C. J., 1999, In: Annual Reviews in Control. 23, 1, p. 71-82 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  222. Published

    An approach to realistic fault prediction and layout design for testability in analogue circuits.

    Prieto, J., Richardson, A. M. D., Rueda, A. & Grout, I., 1998, Proceedings of the conference on design, automation and test in Europe. Paris, p. 906-912 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  223. Published

    An approach to realistic fault prediction and layout design for testability in analog circuits

    Prieto, J. A., Rueda, A., Grout, I., Peralias, E., Huertas, J. L. & Richardson, A. M. D., 1998, Design, Automation and Test in Europe, 1998 Proceedings. LOS ALAMITOS: IEEE COMPUTER SOC, p. 905-909 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  224. Published

    A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR

    Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  225. Published

    Characterization of the ANITA neutron source for accelerated SEE testing at the Svedberg Laboratory

    Prokofiev, A. V., Blomgren, J., Majerle, M., Nolte, R., Röttger, S., Platt, S. P., Xiao, C. X. & Smirnov, A. N., 1/12/2009, 2009 IEEE Radiation Effects Data Workshop, REDW 2009 - Workshop Record, Held in Conjunction with the IEEE Nuclear and Space Radiation Effects Conference, NSREC 2009. IEEE, p. 166-173 8 p. 5336295. (IEEE Radiation Effects Data Workshop).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  226. Published

    ANITA - A new neutron facility for accelerated SEE testing at the Svedberg Laboratory

    Prokofiev, A. V., Blomgren, J., Platt, S. P., Nolte, R., Röttger, S. & Smirnov, A. N., 17/11/2009, 2009 IEEE International Reliability Physics Symposium, IRPS 2009. IEEE, p. 929-935 7 p. 5173383. (IEEE International Reliability Physics Symposium Proceedings).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  227. Published

    Characterization of the ANITA neutron source for accelerated SEE testing at the Svedberg laboratory

    Prokofiev, A. V., Blomgren, J., Nolte, R., Platt, S. P., Röttger, S. & Smirnov, A. N., 1/12/2008, 2008 European Conference on Radiation and Its Effects on Components and Systems, RADECS 2008. IEEE, p. 260-267 8 p. 5782723. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  228. Published

    Mathematical Model Analysis for Mass and Rates of Woodchip IR Drying

    Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/08/2020, Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering. Avestia , 9 p. HTFF 177. ( Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  229. Published

    A Comparative Study of Diffusion Coefficients from Convective and IR Drying of Woodchip

    Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/11/2020, In: Journal of Fluid Flow, Heat and Mass Transfer. 7, p. 66-72 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  230. Published

    An Experimental and CFD Based Analysis on Industrial Biomass Drying Production

    Pryce, M., 2021, Lancaster University. 249 p.

    Research output: ThesisMaster's Thesis

  231. Published

    The influence of lifestyle factors on bone mineral density at the mid radius assessed using pQCT

    Pye, S. R., Ward, K. A., Roy, D. K., Swarbrick, C. M., Adams, J. E., Silman, A. J. & O'Neill, T. W., 2005, In: Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research. 20, 9, p. S378 1 p.

    Research output: Contribution to journalJournal articlepeer-review

  232. Published

    Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine

    Qasim, S. B., Zafar, M. S., Najeeb, S., Khurshid, Z., Shah, A. H., Husain, S. & Rehman, I. U., 02/2018, In: International Journal of Molecular Sciences. 19, 2, 26 p., 407.

    Research output: Contribution to journalReview articlepeer-review

  233. Published

    In- vitro and in -vivo degradation studies of freeze gelated porous chitosan composite scaffolds for tissue engineering applications

    Qasim, S. B., Husain, S., Huang, Y., Pogorielov, M., Deineka, V., Lyndin, M., Rawlinson, A. & Rehman, I. U., 1/02/2017, In: Polymer Degradation and Stability. 136, p. 31-38 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  234. Published

    Application of nanomaterials in dentistry: Micro and Nanomanufacturing

    Qasim, S. B. & Rehman, I. U., 2017, Micro and Nanomanufacturing. Springer International Publishing, Vol. 2. p. 319-336 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  235. Published

    Freeze gelated porous membranes for periodontal tissue regeneration

    Qasim, S. B., Delaine-Smith, R. M., Fey, T., Rawlinson, A. & Rehman, I. U., 1/09/2015, In: Acta Biomaterialia. 23, p. 317-328 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  236. Published

    Potential of electrospun chitosan fibers as a surface layer in functionally graded GTR membrane for periodontal regeneration

    Qasim, S. B., Najeeb, S., Delaine-Smith, R. M., Rawlinson, A. & Ur Rehman, I., 1/01/2017, In: Dental Materials. 33, 1, p. 71-83 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  237. Published

    Condition monitoring of wind turbines based on extreme learning machine

    Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  238. Published

    An integrated data-driven model-based approach to condition monitoring of the wind turbine gearbox

    Qian, P., Ma, X. & Cross, P., 12/07/2017, In: IET Renewable Power Generation. 11, 9, p. 1177-1185 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  239. Published

    Reducing neutral-point voltage fluctuation in NPC three-level active power filters

    Qian, P., Ma, X., Liu, G. & Chen, Z., 06/2018, In: Electrical Engineering. 100, 2, p. 721-732 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  240. Published

    Estimating Health Condition of the Wind Turbine Drivetrain System

    Qian, P., Ma, X. & Zhang, D., 12/10/2017, In: Energies. 2017, 10, 19 p., 1583.

    Research output: Contribution to journalJournal articlepeer-review

  241. Unpublished

    Data-driven model-based approaches to condition monitoring and improving power output of wind turbines

    Qian, P., 2017, (Unpublished) Lancaster University. 183 p.

    Research output: ThesisDoctoral Thesis

  242. Published

    Data-driven condition monitoring approaches to improving power output of wind turbines

    Qian, P., Ma, X., Zhang, D. & Wang, J., 1/08/2019, In: IEEE Transactions on Industrial Electronics. 66, 8, p. 6012 - 6020 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  243. Published

    Preparation and characterization of bioactive composites and fibers for dental applications

    Qidwai, M., Sheraz, M. A., Ahmed, S., Alkhuraif, A. A. & Ur Rehman, I., 2014, In: Dental Materials. 30, 10, p. e253-e263 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  244. Published

    Thermo electroelastic solutions for surface bone remodeling under axial and transverse loads

    Qin, Q. H., Qu, C. Y. & Ye, J. Q., 11/2005, In: Biomaterials. 26, 33, p. 6798-6810 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  245. Published

    Thermoelectroelastic solutions for internal bone remodeling under axial and transverse loads

    Qin, Q. H. & Ye, J. Q., 05/2004, In: International Journal of Solids and Structures. 41, 9-10, p. 2447-2460 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  246. Published

    Toughening mechanisms in composite materials

    Qin, Q. (ed.) & Ye, J. (ed.), 06/2015, Elsevier. 416 p. (Woodhead Publishing Series in Composites Science and Engineering)

    Research output: Book/Report/ProceedingsBook

  247. Published

    Formation mechanism of tight coal-derived-gas reservoirs with medium-low abundance in Xujiahe Formation, central Sichuan Basin, China

    Qin, S., Li, F., Li, W., Zhou, Z. & Zhou, G., 01/2018, In: Marine and Petroleum Geology. 89, 1, p. 144-154 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  248. Published

    Auto-generation methodology of complex-shaped coarse aggregate set of 3D concrete numerical test specimen

    Qiu, W., Fu, S. & Ye, J., 30/08/2019, In: Construction and Building Materials. 217, p. 612-625 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  249. Published

    Modeling driver steering control based on stochastic model predictive control

    Qu, T., Chen, H., Ji, Y., Guo, H. & Cao, D., 10/2013, p. 3704-3709. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  250. Published

    Reagent and power consumption of in-situ waterborne pollution monitoring systems

    Quane, N., Moore, B. & Cheneler, D., 3/07/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  251. Published

    Resource management in microreactors - a computational study

    Quane, N., Moore, B. & Cheneler, D., 3/07/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  252. Published

    Assessing the energy potential of modernizing the European hydropower fleet

    Quaranta, E., Aggidis, G., Boes, R., Comoglio, C., De Michele, C., Ritesh Patro, E., Georgievskaia, E., Harby, A., Kougias, I., Muntean, S., Pérez-Díaz, J., Romero–Gomez, P., Rosa-Clot, M., Schleiss, A., Vagnoni, E., Wirth, M. & Pistocchi, A., 15/10/2021, In: Energy Conversion and Management. 246, 15 p., 114655.

    Research output: Contribution to journalJournal articlepeer-review

  253. Published

    Preliminary investigation of multi-element profiles for a high-life variable pitch vertical-axis tidal stream device.

    Quayle, S. D. & Aggidis, G. A., 2006, In: IMechE Conference Transactions. v. 10

    Research output: Contribution to journalJournal articlepeer-review

  254. Published

    Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator

    Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  255. Published

    The influence of vegetation species and plant properties on runoff and soil erosion: results from a rainfall simulation study in south east Spain.

    Quinton, J. N., Edwards, G. M. & Morgan, R. P. C., 09/1997, In: Soil Use and Management. 13, 3, p. 143-148 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  256. Published

    The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector

    Qureshi, J., Lam, D. & Ye, J., 05/2011, In: Engineering Structures. 33, 5, p. 1643-1656 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  257. Published

    Effect of shear connector spacing and layout on the shear connector capacity in composite beams

    Qureshi, J., Lam, D. & Ye, J., 04/2011, In: Journal of Constructional Steel Research. 67, 4, p. 706-719 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  258. Published

    Finite element modelling of shear connection behaviour in a push test using profiled sheeting

    Qureshi, J., Lam, D. & Ye, J., 16/08/2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. CRC Press/Balkema, p. 679-682 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  259. Published

    Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting

    Qureshi, J., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 737-744 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  260. Published

    Dairy-inspired coatings for bone implants from whey protein isolate-derived self-assembled fibrils

    Rabe, R., Hempel, U., Martocq, L., Keppler, J. K., Aveyard, J. & Douglas, T., 3/08/2020, In: International Journal of Molecular Sciences. 21, 15, 7 p., 5544.

    Research output: Contribution to journalJournal articlepeer-review

  261. Published

    Significance enhancement in the conductivity of core shell nanocomposite electrolytes

    Rafique, A., Raza, R., Akram, N., Ullah, M. K., Ali, A., Irshad, M., Siraj, K., Khan, M. A., Zhu, B. & Dawson, R. J., 6/10/2015, In: RSC Advances. 2015, 105, p. 86322-86329 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  262. Published

    A review of recent developments on kinetics parameters for glycerol electrochemical conversion – A by-product of biodiesel

    Rahim, S. A. N. M., Lee, C. S., Abnisa, F., Aroua, M. K., Daud, W. A. W., Cognet, P. & Pérès, Y., 25/02/2020, In: Science of the Total Environment. 705, 27 p., 135137.

    Research output: Contribution to journalReview articlepeer-review

  263. Published

    Investigating a Power-Absorber Wave Energy Converter.

    Rahmati, M. T., Aggidis, G. A. & Chaplin, R. V., 07/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  264. Published

    Test on a Novel Pitching-Surge Wave Energy Converter.

    Rahmati, M. T., Aggidis, G. A., Chaplin, R. V. & McCabe, A. P., 07/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  265. Published

    A RANS Code for Low-Speed Axial Turbo machinery flow analysis.

    Rahmati, M. T. & Aggidis, G. A., 06/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  266. Published

    An inverse approach for blade shape design.

    Rahmati, M. T. & Aggidis, G. A., 05/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  267. Published

    An inverse approach for airfoil design.

    Rahmati, M. T., Aggidis, G. A. & Zangeneh, M., 05/2008, In: Advances in Fluid Mechanics. 59, p. 35-44 10 p.

    Research output: Contribution to journalJournal article

  268. Published

    Numerical and experimental analysis of the power output of a point absorber wave energy converter in irregular waves

    Rahmati, M. & Aggidis, G. A., 1/01/2016, In: Ocean Engineering. 111, p. 483-492 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  269. Published

    Investigating a power-obsorber wave energy converter

    Rahmati, M. T., Mccabe, A. P., Aggidis, G. A. & Chaplin, R. V., 2008, ASME 2008 Power Conference. American Society of Mechanical Engineers (ASME), p. 699-705 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  270. Published

    Nonlinear identification of a gas turbine system in transient operation mode using neural network

    Rahnama, M., Ghorbani, H. & Montazeri, A., 2012, Thermal Power Plants (CTPP), 2012 4th Conference on. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  271. Published

    Machine-learning approach for fault detection in brushless synchronous generator using vibration signals

    Rahnama, M., Vahedi, A., Alikhani, A. M. & Montazeri, A., 1/08/2019, In: IET Science, Measurement & Technology. 13, 6, p. 852-861 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  272. Published

    Electrospun polycaprolactone membranes with Zn-doped bioglass for nasal tissues treatment

    Rajzer, I., Dziadek, M., Kurowska, A., Cholewa-Kowalska, K., Ziabka, M., Menaszek, E. & Douglas, T., 1/07/2019, In: Journal of Materials Science: Materials in Medicine. 30, 11 p., 80.

    Research output: Contribution to journalJournal articlepeer-review

  273. Published

    Urban bus driver ride and road-friendliness. Part I: model development and role of operating parameters

    Rakheja, S., Cao, D. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 305-332 28 p.

    Research output: Contribution to journalJournal articlepeer-review

  274. Published

    A comparative finite elemental analysis of glass abutment supported and unsupported cantilever fixed partial denture

    Ramakrishaniah, R., Al Kheraif, A. A., Elsharawy, M. A., Alsaleh, A. K., Ismail Mohamed, K. M. & Rehman, I. U., 2015, In: Dental Materials. 31, 5, p. 514-521 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  275. Published

    Preliminary fabrication and characterization of electron beam melted Ti-6Al-4V customized dental implant

    Ramakrishnaiah, R., Al Kheraif, A. A., Mohammad, A., Divakar, D. D., Kotha, S. B., Celur, S. L., Hashem, M. I., Vallittu, P. K. & Rehman, I. U., 1/05/2017, In: SAUDI JOURNAL OF BIOLOGICAL SCIENCES. 24, 4, p. 787-796 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  276. Published

    Applications of Raman spectroscopy in dentistry part II: Soft tissue analysis

    Ramakrishnaiah, R., Kotha, S. B., Alkheraif, A. A., Celur, S. L., Divakar, D. D., Javed, F. & Rehman, I. U., 1/10/2016, In: APPLIED SPECTROSCOPY REVIEWS. 51, 10, p. 799-821 23 p.

    Research output: Contribution to journalJournal articlepeer-review

  277. Published

    Applications of Raman spectroscopy in dentistry: Analysis of tooth structure

    Ramakrishnaiah, R., Rehman, G. U., Basavarajappa, S., Al Khuraif, A. A., Durgesh, B. H., Khan, A. S. & Rehman, I. U., 2015, In: APPLIED SPECTROSCOPY REVIEWS. 50, 4, p. 332-350 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  278. Published

    Prediction of CO2/O2 absorption selectivity using supported ionic liquid membranes (SILMs) for gas–liquid membrane contactor

    Ramli, N. A., Hashim, N. A. & Aroua, M. K., 4/03/2018, In: Chemical Engineering Communications. 205, 3, p. 295-310 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  279. Published

    Supported ionic liquid membranes (SILMs) as a contactor for selective absorption of CO2/O2 by aqueous monoethanolamine (MEA)

    Ramli, N. A., Hashim, N. A. & Aroua, M. K., 2/01/2020, In: Separation and Purification Technology. 230, 9 p., 115849.

    Research output: Contribution to journalJournal articlepeer-review

  280. Published

    The effects of 1-ethyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide [emim] [NTf2] IL: acetone compositions on the amount, homogeneity and chemical stability of immobilized IL in hollow fiber-supported ionic liquid membranes (SILMs)

    Ramli, N. A., Hashim, N. A., Aroua, M. K., Shamiri, A. & Abdul Patah, M. F., 31/07/2021, In: Chemical Engineering Communications. 208, 7, p. 925-936 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  281. Published

    The use of vibrational spectroscopy to study the pathogenesis multiple sclerosis and other neurological conditions

    Ramos, I. R., Lyng, F. M., Rehman, I. U., Sharrack, B. & Woodroofe, M. N., 1/10/2017, In: APPLIED SPECTROSCOPY REVIEWS. 52, 10, p. 868-882 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  282. Published

    RadICAL Stack: a localisation method for dynamic gamma/neutron fields

    Randall, G., Ellis, M., Duroe, K., Jones, A. R., Joyce, M. J., Payne, C., Sellin, P. & Speller, R., 31/10/2015, 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, p. 1-4 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  283. Published

    Combustion characteristics of H2/N2 and H2/CO syngas nonpremixed flames

    Ranga Dinesh, K. K. J., Jiang, X., Kirkpatrick, M. P. & Malalasekera, W., 11/2012, In: International Journal of Hydrogen Energy. 37, 21, p. 16186-16200 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  284. Published

    Influence of fuel variability on the characteristics of impinging non-premixed syngas burning

    Ranga Dinesh, K. K. J., Jiang, X., van Oijen, J. A., Bastiaans, R. J. M. & de Goey, L. P. H., 2013, In: Symposium International on Combustion. 34, 2, p. 3219–3229 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  285. Published

    Large eddy simulation of fuel variability and flame dynamics of hydrogen-enriched nonpremixed flames

    Ranga Dinesh, K. K. J., Jiang, X., Malalasekera, W. & Odedra, A., 03/2013, In: Fuel Processing Technology. 107, p. 2-13 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  286. Published

    Direct numerical simulation of nonpremixed syngas burning with detailed chemistry

    Ranga Dinesh, K. K. J., Jiang, X. & van Oijen, J. A., 05/2013, In: Fuel. 107, p. 343-355 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  287. Published

    Hydrogen-enriched nonpremixed jet flames: effects of preferential diffusion

    Ranga Dinesh, K. K. J., Jiang, X., van Oijen, J. A., Bastiaans, R. J. M. & de Goey, L. P. H., 15/04/2013, In: International Journal of Hydrogen Energy. 38, 11, p. 4848-4863 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  288. Published

    Hydrogen-enriched non-premixed jet flames: compositional structures with near-wall effects

    Ranga Dinesh, K. K. J., Jiang, X. & van Oijen, J. A., 22/04/2013, In: International Journal of Hydrogen Energy. 38, 12, p. 5150-5164 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  289. Published

    Hydrogen-enriched non-premixed jet flames: analysis of the flame surface, flame normal, flame index and Wobbe index

    Ranga Dinesh, K. K. J., Jiang, X. & van Oijen, J. A., 15/04/2014, In: International Journal of Hydrogen Energy. 39, 12, p. 6753-6763 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  290. Published

    Near-field local flame extinction of oxy-syngas non-premixed jet flames: a DNS study

    Ranga Dinesh, K. K. J., van Oijen, J. A., Luo, K. H. & Jiang, X., 15/08/2014, In: Fuel. 130, p. 189–196 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  291. Published

    Providing location based information/advertising for existing mobile phone users.

    Rashid, O., Coulton, P. & Edwards, R., 01/2008, In: Personal and Ubiquitous Computing. 12, 1, p. 3-10 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  292. Published

    Extending Cyberspace:Location Based Games Using Cellular Phones.

    Rashid, O., Mullins, I., Coulton, P. & Edwards, R., 01/2006, In: Computers in Entertainment (CIE). 4, 1, p. 1-18 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  293. Published

    PAC-LAN: Mixed reality gaming with RFID enabled mobile phones

    Rashid, O., Bamford, W., Coulton, P., Edwards, R. & Scheible, J., 1/10/2006, In: Computers in Entertainment (CIE). 4, 4, p. 1-17 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  294. Published

    Implications of IMS and SIP on the Evolution of Mobile Applications.

    Rashid, O., Coulton, P. & Edwards, R., 07/2006, Consumer Electronics, 2006. ISCE '06. 2006 IEEE Tenth International Symposium on. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  295. Published

    PAC-LAN: the human arcade.

    Rashid, O., Bamford, W., Coulton, P. & Edwards, R., 06/2006, ACE '06 Proceedings of the 2006 ACM SIGCHI international conference on Advances in computer entertainment technology. New York: ACM, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNOther chapter contribution

  296. Published

    Implementing Location Based Information/Advertising for Existing Mobile Phone Users in Indoor/Urban Environments.

    Rashid, O., Coulton, P. & Edwards, R., 07/2005, Mobile Business, 2005. ICMB 2005. International Conference on. IEEE, p. 377-383 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  297. Published

    Utilising RFID for mixed reality mobile games.

    Rashid, O., Coulton, P., Edwards, R. & Bamford, W., 01/2006, Consumer Electronics, 2006. ICCE '06. 2006 Digest of Technical Papers. International Conference on. IEEE, p. 459-460 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  298. Published

    Dopamine/mucin-1 functionalized electro-active carbon nanotubes as a probe for direct competitive electrochemical immunosensing of breast cancer biomarker

    Rashid, S., Nawaz, M. H., Rehman, I. U., Hayat, A. & Marty, J. L., 1/03/2021, In: Sensors and Actuators B: Chemical. 330, 11 p., 129351.

    Research output: Contribution to journalJournal articlepeer-review

  299. Published

    BLDC motor power control techniques appraisal: novel current control technique

    Ratcliffe, M. & Gamage, K., 2013, Power Engineering, Energy and Electrical Drives (POWERENG), 2013 Fourth International Conference on. Piscataway, N.J.: IEEE, p. 1700-1705 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  300. Published

    Corrosion behaviour of AGR simulated fuels: evolution of the fuel surface

    Rauff-Nisthar, N., Boxall, C., Farnan, I., Hiezl, Z., Lee, W., Perkins, C. & Wilbraham, R., 09/2013, In: ECS Transactions. 53, 21, p. 95-104 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  301. Published

    Corrosion behaviour of AGR SIMFUELS

    Rauff-Nisthar, N., Boxall, C., Hambley, D., Hiezl, Z., Padovani, C. & Wilbraham, R., 11/08/2015, In: ECS Transactions. 66, 17, p. 85-94 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  302. Published

    Energy Return on Energy Invested (ERoEI) for photovoltaic solar systems in regions of moderate insolation: a comprehensive response

    Raugei, M., Sgouridis, S., Murphy, D., Fthenakis, V., Frischknecht, R., Breyer, C., Bardi, U., Barnhart, C., Buckley, A., Carbajales-Dale, M., Csala, D., de Wild-Scholten, M., Heath, G., Jæger-Waldau, A., Jones, C., Keller, A., Leccisi, E., Mancarella, P., Pearsall, N., Siegel, A. & 2 others, Sinke, W. & Stolz, P., 03/2017, In: Energy Policy. 102, p. 377-384 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  303. Published

    Intracavity generation of 610 nm light by periodically poled near-stoichiometric lithium tantalate

    Rautiainen, J., Okhotnikov, O. G., Eger, D., Zolotovskaya, S., Fedorova, K. A. & Rafailov, E. U., 29/01/2009, In: Electronics Letters. 45, 3, p. 177-179 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  304. Published

    Accounting for the unique, doubly dual nature of ionic liquids from a molecular thermodynamic, and modeling standpoint

    Rebelo, L. P. N., Lopes, J. N. C., Esperanca, J. M. S. S., Guedes, H. J. R., Lachwa, J., Najdanovic-Visak, V. & Visak, Z. P., 11/2007, In: Accounts of Chemical Research. 40, 11, p. 1114-1121 8 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  305. Published

    Phase behavior and thermodynamic properties of ionic liquids, ionic liquid mixtures, and ionic liquid solutions

    Rebelo, LPN., Najdanovic-Visak, V., de Azevedo, RG., Esperanca, JMSS., da Ponte, MN., Guedes, HJR., Visak, Z. P., de Sousa, HC., Szydlowski, J., Lopes, JNC. & Cordeiro, TC., 2005, Ionic liquids III: fundamentals, progress, challenges, and opportunities. Rogers, R. D. & Seddon, K. R. (eds.). Washington, D. C.: American Chemical Society, p. 270-291 22 p. (ACS Symposium Series; vol. 901).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  306. Published

    A detailed thermodynamic analysis of [C(4)mim][BF4] plus water as a case study to model ionic liquid aqueous solutions

    Rebelo, LPN., Najdanovic-Visak, V., Visak, Z. P., da Ponte, MN., Szydlowski, J., Cerdeirina, CA., Troncoso, J., Romani, L., Esperanca, JMSS., Guedes, HJR. & de Sousa, HC., 2004, In: Green Chemistry. 6, 8, p. 369-381 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  307. Published

    Double critical phenomena in (water plus polyacrylamides) solutions

    Rebelo, LPN., Visak, Z. P., de Sousa, HC., Szydlowski, J., de Azevedo, RG., Ramos, A. M., Najdanovic-Visak, V., da Ponte, MN. & Klein, J., 26/02/2002, In: Macromolecules. 35, 5, p. 1887-1895 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  308. Published

    Two ways of looking at Prigogine and Defay's equation

    Rebelo, LPN., Najdanovic-Visak, V., Visak, Z. P., da Ponte, MN., Troncoso, J., Cerdeirina, CA. & Romani, L., 2002, In: Physical Chemistry Chemical Physics. 4, 11, p. 2251-2259 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  309. Published

    High pressure vapor–liquid equilibrium for the ternary system ethanol/(±)-menthol/carbon dioxide

    Rebocho, S., V. M. Nunes, A., Najdanovic-Visak, V., Barreiros, S., Simões, P. M. C. & Paiva, A., 08/2014, In: Journal of Supercritical Fluids. 92, p. 282–287 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  310. Published

    Experimental Determination and Modeling of the Phase Behavior of the CO2 + Propionic Anhydride Binary System at High Pressure

    Rebocho, S., V. M. Nunes, A., Najdanovic, V., Barreiros, S. & Paiva, A., 12/01/2017, In: Journal of Chemical and Engineering Data. 62, 1

    Research output: Contribution to journalJournal articlepeer-review

  311. Published

    Validation of a hybrid electric vehicle dynamics model for energy management and vehicle stability control

    Reeves, K., Montazeri, A. & Taylor, C. J., 8/06/2016, Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on. IEEE, p. 849-854 6 p. (Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  312. Published

    Model development and energy management control for hybrid electric race vehicles

    Reeves, K., Montazeri, A. & Taylor, C. J., 31/08/2016, 2016 UKACC 11th International Conference on Control (CONTROL). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  313. Published

    Integrated optimisation for dynamic modelling, path planning and energy management in hybrid race vehicles

    Reeves, K., 2021, Lancaster University. 268 p.

    Research output: ThesisDoctoral Thesis

  314. Published

    Sparkling extreme-ultraviolet bright dots observed with Hi-C

    Régnier, S., Alexander, C. E., Walsh, R. W., Winebarger, A. R., Cirtain, J., Golub, L., Korreck, K. E., Mitchell, N., Platt, S., Weber, M., De Pontieu, B., Title, A., Kobayashi, K., Kuzin, S. & Deforest, C. E., 2014, In: The Astrophysical Journal. 784, 2, 11 p., 134.

    Research output: Contribution to journalJournal articlepeer-review

  315. Published

    Raman spectroscopic analysis of breast cancer tissues: Identifying differences between normal, invasive ductal carcinoma and ductal carcinoma in situ of the breast tissue

    Rehman, S., Movasaghi, Z., Tucker, A. T., Joel, S. P., Darr, J. A., Ruban, A. V. & Rehman, I. U., 2007, In: Journal of Raman Spectroscopy. 38, 10, p. 1345-1351 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  316. Published

    Analysis of apatite layers on glass-ceramic particulate using FTIR and FT-Raman spectroscopy

    Rehman, I., Karsh, M., Hench, L. L. & Bonfield, W., 2000, In: Journal of Biomedical Materials Research Part A. 50, 2, p. 97-100 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  317. Published

    Analysis of in vitro reaction layers formed on Bioglass® using thin- film X-ray diffraction and ATR-FTIR microspectroscopy

    Rehman, I., Knowles, J. C. & Bonfield, W., 1998, In: Journal of Biomedical Materials Research Part A. 41, 1, p. 162-166 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  318. Published

    Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy

    Rehman, I. & Bonfield, W., 1997, In: Journal of Materials Science: Materials in Medicine. 8, 1, p. 1-4 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  319. Published

    Fourier transform infrared analysis of poly(ester-urethanes) at low temperature in-situ by using a newly constructed liquid nitrogen cooled sample stage

    Rehman, I., Barnardo, C. & Smith, R., 1997, In: Journal of Materials Science. 32, 10, p. 2617-2621 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  320. Published

    Biodegradable polyurethanes: biodegradable low adherence films for the prevention of adhesions after surgery

    Rehman, I. U., 1996, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 11, 2, p. 182-257 76 p.

    Research output: Contribution to journalJournal articlepeer-review

  321. Published

    In situ analysis of the degree of polymerization of bone cement by using FT-Raman spectroscopy

    Rehman, I., Harper, E. J. & Bonfield, W., 1996, In: Biomaterials. 17, 16, p. 1615-1619 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  322. Published

    In vitro degradation of poly(ester-urethanes) for biomedical applications

    Rehman, I., Andrews, E. H. & Smith, R., 1996, In: Journal of Materials Science: Materials in Medicine. 7, 1, p. 17-20 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  323. Published

    Characterization of synthetic and natural materials by Fourier transform Raman spectroscopy

    Rehman, I. U., 1995, In: Journal of Advanced Materials. 27, 1, p. 59-63 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  324. Published

    Structural evaluation of human and sheep bone and comparison with synthetic hydroxyapatite by FT‐Raman spectroscopy

    Rehman, I., Smith, R., Hench, L. L. & Bonfield, W., 1/10/1995, In: Journal of Biomedical Materials Research Part A. 29, 10, p. 1287-1294 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  325. Published

    Analysis of surface layers on bioactive glasses

    Rehman, I., Hench, L. L., Bonfield, W. & Smith, R., 1/08/1994, In: Biomaterials. 15, 10, p. 865-870 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  326. Published

    Vibrational spectroscopy for tissue analysis: Vibrational Spectroscopy for Tissue Analysis

    Rehman, I. U., Movasaghi, Z. & Rehman, S., 2012, 1st ed. CRC Press. 303 p.

    Research output: Book/Report/ProceedingsBook

  327. Published

    Dental regeneration

    Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  328. Published

    Fourier transform infrared spectroscopic analysis of breast cancer tissues; Identifying differences between normal breast, invasive ductal carcinoma, and ductal carcinoma in situ of the breast

    Rehman, S., Movasaghi, Z., Darr, J. A. & Rehman, I. U., 2010, In: APPLIED SPECTROSCOPY REVIEWS. 45, 5, p. 355-368 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  329. Published

    Role of artificial intelligence and vibrational spectroscopy in cancer diagnostics

    Rehman, I. U., Khan, R. S. & Rehman, S., 1/08/2020, In: Expert Review of Molecular Diagnostics. 20, 8, p. 749-755 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  330. Published

    Finite element analysis to support component level fault modelling for MEMS.

    Reichenbach, R., Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of SPIE design, test, integration and packaging of MEMS symposium. Vol. 4408. p. 147-158 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  331. Published

    The mechanical behaviour of silicon diaphragms for micromachined capacitive pressure sensor

    Ren, J., Cheneler, D. & Ward, M., 2008, In: Advances in Science and Technology. 54, p. 422-427 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  332. Published

    Fast terahertz imaging using a quantum cascade amplifier

    Ren, Y., Wallis, R., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Beere, H. E. & Ritchie, D. A., 6/07/2015, In: Applied Physics Letters. 107, 1, 5 p., 011107.

    Research output: Contribution to journalJournal articlepeer-review

  333. Published

    Terahertz quantum cascade amplifier

    Ren, Y., Wallis, R., Shah, Y. D., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Kamboj, V., Beere, H. E. & Ritchie, D. A., 2015, 26th International Symposium on Space Terahertz Technology, ISSTT 2015. International Symposium on Space Terahertz Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  334. Published

    Single mode terahertz quantum cascade amplifier

    Ren, Y., Wallis, R., Shah, Y. D., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Kamboj, V., Beere, H. E. & Ritchie, D. A., 10/2014, In: Applied Physics Letters. 105, 14, 4 p., 141102.

    Research output: Contribution to journalJournal articlepeer-review

  335. Published

    Fast Terahertz imaging using a quantum cascade amplifier up to 20,000 pps

    Ren, Y., Wallis, R., Jessop, D. S., Degl'innocenti, R., Klimont, A., Beere, H. E. & Ritchie, D. A., 12/04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  336. Published

    Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion

    Ren, Y., Liang, L., Shan, Q., Cai, A., Du, J., Huang, Q., Liu, S., Yang, X., Tian, Y. & Wu, H., 31/12/2020, In: Virtual and Physical Prototyping. 15, S1, p. 543-554 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  337. Published

    Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on

    Rennie, A. E. W. (ed.), Jacobson, D. M. (ed.) & Bocking, C. (ed.), 2002, Professional Engineering Publishing. 173 p.

    Research output: Book/Report/ProceedingsBook

  338. Published

    Electroforming for Injection Moulding

    Rennie, A. E. W. & Bocking, C., 2002, In: State of the Art Report - RAPTIA European Thematic Network.

    Research output: Contribution to journalJournal article

  339. Published

    The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes

    Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  340. Published

    Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes

    Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  341. Published

    Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)

    Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  342. Published

    Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on

    Rennie, A. (ed.), Jacobson, D. M. (ed.) & Bocking, C. E. (ed.), 2005, X-CD Technologies Inc. 129 p.

    Research output: Book/Report/ProceedingsBook

  343. Published

    Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on

    Rennie, A. (ed.), Jacobson, D. M. (ed.) & Bocking, C. E. (ed.), 2008, MJA Print. 173 p.

    Research output: Book/Report/ProceedingsBook

  344. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on

    Rennie, A. (ed.), Bocking, C. E. (ed.) & Jacobson, D. M. (ed.), 2009, MJA Print. 123 p.

    Research output: Book/Report/ProceedingsBook

  345. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on

    Rennie, A. (ed.) & Bocking, C. E. (ed.), 06/2011, CRDM Ltd. 203 p.

    Research output: Book/Report/ProceedingsBook

  346. Published

    Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software

    Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  347. Published

    Electroforming for Injection Moulding

    Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  348. Published

    Rapid design, prototyping and manufacturing

    Rennie, A., Aitchison, D. (ed.) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.

    Research output: Contribution to journalEditorial

  349. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  350. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  351. Published

    Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

    Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  352. Published

    A transnational approach to the implementation of eco-design methodologies in SMEs

    Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  353. Published

    A review of suitable methods for producing automated or semi automated product designs for production using RM technologies

    Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  354. Unpublished
  355. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/ProceedingsCommissioned report

  356. Published

    Virtual Prototyping Phase II

    Rennie, A., 05/2006, N/A. 37 p.

    Research output: Book/Report/ProceedingsCommissioned report

  357. Published

    Virtual Prototyping

    Rennie, A., 07/2005, N/A. 77 p.

    Research output: Book/Report/ProceedingsCommissioned report

  358. Published

    Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference

    Rennie, A. E. W. (ed.) & Bibb, R. (ed.), 2016, Lancaster: Lancaster University. 165 p.

    Research output: Book/Report/ProceedingsProceedings

  359. Published

    University Programmes during COVID-19 Pandemic

    Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNEntry for encyclopedia/dictionary

  360. Published

    ABA regulated gene expression in stomatal guard cells of Commelina communis.

    Renwick, K. F., Webb, A. A. R., Sarsag, M., Shirras, A. D., Mansfield, T. A. & Hetherington, A. M., 1992, In: Journal of Experimental Botany. 43, Supple, p. P10.64

    Research output: Contribution to journalJournal article

  361. Published

    Optical properties of metamorphic type-I InAs1-xSbx/AlyIn1-yAs quantum wells grown on GaAs for the mid-infrared spectral range

    Repiso Menendez, E., Broderick, C., de la Mata, M., Arkani, R., Lu, Q., Marshall, A., Molina, S., O'Reilly, E., Carrington, P. & Krier, A., 30/08/2019, In: Journal of Physics D: Applied Physics. 52, 10 p., 465102.

    Research output: Contribution to journalJournal articlepeer-review

  362. Published

    FTIR analysis of natural and synthetic collagen

    Riaz, T., Zeeshan, R., Zarif, F., Ilyas, K., Muhammad, N., Safi, S. Z., Rahim, A., Rizvi, S. A. A. & Rehman, I. U., 1/09/2018, In: APPLIED SPECTROSCOPY REVIEWS. 53, 9, p. 703-746 44 p.

    Research output: Contribution to journalReview articlepeer-review

  363. Published

    Field emission vacuum triode: THz waveguide solutions for the transmission lines

    Riccitelli, R., Brunetti, F., Paoloni, C., Ulisse, G., Di Carlo, A. & Krozer, V., 2008, 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 379-380 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  364. Published

    Innovative design of nano-vacuum triode

    Riccitelli, R., Brunetti, F., Petrolati, E., Paoloni, C., Di Carlo, A., Toschi, F., Terranova, M. L. & Cirillo, M., 2007, EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, p. 323-324 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  365. Published

    Innovative vacuum device flip-cathode based on carbon nanotubes field emitters

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G., Di Carlo, A., sessa, V., Terranova, M. L., Cirillo, M. & Orlanducci, S., 06/2008, First Mediterranean Photonic Conference. Italy

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  366. Published

    Flip-cathode field emission vacuum triode for THz applications

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G. & Di Carlo, A., 05/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  367. Published

    Designing Digital Materials with Volumetric Gradients

    Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  368. Published

    Phosphorus solubility changes following additions of bioenergy wastes to an agricultural soil: implications for crop availability and environmental mobility  

    Richards, S., Marshall, R., Lag Brotons, A., Semple, K. & Stutter, M., 1/11/2021, In: Geoderma. 401, 11 p., 115150.

    Research output: Contribution to journalJournal articlepeer-review

  369. Published

    Bringing Multi-Domain Functions to Intelligent Systems through MEMS Technology Platforms – The INTEGRAMplus Access Service.

    Richardson, A., Pickering, C., McNie, M., Reeves, C., Schropfer, G., Knapp, H. & Bosshard, C., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic). 4, p. 38-40 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  370. Published

    Design-for-testability for mixed signal and analogue design.

    Richardson, A. M. D. & Lechner, A., 2000, Proceedings of 7th international conference on mixed design of integrated circuits and systems. Poland

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  371. Published

    Design for testability strategies for mixed signal and analogue designs: from layout to system.

    Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  372. Published

    Reliability indicators.

    Richardson, A. M. D. & Dorey, A. P., 1992, Third European symposium of reliability of electron devices, failure, physics and analysis (ESREF). Schabisch Gmund, p. 277-285 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  373. Published

    Supply current monitoring in cmos circuits for reliability prediction and test.

    Richardson, A. M. D. & Dorey, A. P., 1992, In: Quality and Reliability Engineering International. 8, 6, p. 543-548 6 p.

    Research output: Contribution to journalJournal article

  374. Published

    System in Package Technology - Design for Manufacture Challenges.

    Richardson, A. M. D., Bailey, C., Dumas, N. & Yannou, J. M., 1/02/2007, In: Circuit World. 33, 1, p. 36-46 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  375. Published

    Sensor Testing Through Bias Superposition.

    Richardson, A. M. D., Bunyan, R., Mathias, H. & Nouet, P., 1/05/2007, In: Sensors and Actuators A: Physical. 136, 1, p. 441-455 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  376. Published

    A capacitance and optical method for the static and dynamic characterization of micro electro mechanical systems (MEMS) devices.

    Richardson, A. M. D., Ferraris, E., Fassi, I., De Masi, B. & Rosing, R., 1/09/2006, In: Microsystem Technologies. 12, 10-11, p. 1053-1061 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  377. Published

    Construction of Nonlinear Dynamic MEMS Component Models Using Cosserat Theory.

    Richardson, A., De Masi, B., Rosing, R. & Wang, C., 1/08/2004, In: Analog Integrated Circuits and Signal Processing. 40, 2, p. 117-130 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  378. Published

    INTEGRAMplus : a new European service project providing development platforms for integrated micro-nano technologies and products.

    Richardson, A. M. D., Pickering, C., McNie, M. & Reeves, C. L., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic).

    Research output: Contribution to journalJournal articlepeer-review

  379. Published

    MNT needs methodologies and software tools.

    Richardson, A. M. D., Solomon, P. & El-Fatatry, A., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic). 2, p. 16-35 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  380. Published

    Guest editorial.

    Richardson, A. M. D., Mir, S. & Cheng, T., 12/2006, In: Journal of Electronic Testing. 22, 4-6, p. 311

    Research output: Contribution to journalJournal articlepeer-review

  381. Published

    Editorial: Mixed signal & analogue IC test technology

    Richardson, A. & Dorey, T., 12/1996, In: IEE Proceedings - Circuits, Devices and Systems. 143, 6, p. 357-357 1 p.

    Research output: Contribution to journalEditorialpeer-review

  382. Published

    Fault-tolerant and self-testable architectures for zero failure electronics

    Richardson, A., Sharif, E. & Betts, W. R., 1997, AUTOMOTIVE ELECTRONICS - AUTOTECH'97. EDMUNDS: MECHANICAL ENGINEERING PUBL, p. 133-142 10 p. (IMechE seminar publication ; 1997-10).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  383. Published

    Design for Micro and Nano Manufacture; The "PATENT-DfMM Network of Excellence: Modelling and Simulation Cluster

    Richardson, A., Slattery, O. & Rencz, M., 1/04/2006, Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2006. EuroSime 2006. 7th International Conference on. p. 1 -5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  384. Published

    Integrated Test Support for Micro- Electro-Mechanical-Systems (MEMS)

    Richardson, A., Vermeiren, W., Straube, B. & Olbrich, T., 19/09/1996, p. 273. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  385. Published

    The application of IDDX test strategies in analogue and mixed signal IC's

    Richardson, A., Bratt, A., Baturone, I. & HUERTAS, J. L., 22/06/1995. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  386. Published

    Defect oriented test development based on inductive fault analysis

    Richardson, A., Kerkhoff, H. G. & Harvey, R., 22/06/1995, p. 2-11. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  387. Published

    An Integrated Diagnostic Reconfiguration (IDR) design approach for fault tolerant mixed signal integrated systems

    Richardson, A., Sharif, E. & Dorey, A., 11/06/1998, p. 88-90. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  388. Published

    Reconfiguration based built-in self-test for analogue front-end circuits

    Richardson, A., Lechner, A. & Hermes, B., 18/06/1999, p. 243-247. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  389. Published

    The application of neuMOS transistors to enhanced Built-in Self-Test (BIST) and product quality

    Richardson, A. & Nicholson, R., 18/06/1999, p. 257-261. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  390. Published

    Test support strategies for MEMS

    Richardson, A., Rosing, R., Peyton, A. & Dorey, A., 18/06/1999, p. 345-350. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  391. Published

    Reconfigurable circuits for fault tolerant systems: factors to consider

    Richardson, A., Jeffrey, C. & Lechner, A., 21/06/2002, p. 215-218. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  392. Published

    Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers

    Richardson, A., Tijou, J., Burbidge, M. & Vaid, V., 21/06/2002, p. 23-29. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  393. Published

    Testing high resolution SD ADC’s by using the noise transfer function

    Richardson, A. & De-Venuto, D., 26/05/2004. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  394. Published

    Test of A/D Converters

    Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  395. Published

    Phase Locked Loop Test Methodology

    Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  396. Published

    Delivering Bio-Mems & Microfluidic Education Around Accessible Technologies

    Richardson, A., Liu, H., Koltsov, D., Rosing, R., Ryan, T. & Wooton, R., 28/05/2008, Proceedings of the 8th European Workshop on Microelectronics Education. EDA Publishing, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  397. Published

    A Dependable Microelectronic Peptide Synthesizer Using Electrode Data

    Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.

    Research output: Contribution to journalJournal articlepeer-review

  398. Published

    Microsystems for structural health monitoring.

    Richardson, A., Van Heeren, H. & Neylon, S., 10/2008, European Commission.

    Research output: Book/Report/ProceedingsCommissioned report

  399. Published

    The economics of multi-axis wave energy converters

    Richardson, D. & Aggidis, G., 9/06/2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  400. Published

    Development of a multi frequency impedance measurement system for use in MEMS flow cytometers

    Richardson, A. M. D., Cole, N. & Abdul‑Hafiz, A., 12/2017, In: Microsystem Technologies. 23, 12, p. 5527-5543 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  401. Published

    Multi-axis point absorber wave energy converters

    Richardson, D., 2019, Lancaster University. 179 p.

    Research output: ThesisDoctoral Thesis

  402. E-pub ahead of print

    Self-Monitoring, Self-Healing Biomorphic Sensor Technology

    Richardson, A. & Cheneler, D., 3/10/2019, 2019 IEEE 25th International Symposium on On-Line Testing and Robust System Design, IOLTS 2019. Gizopoulos, D., Alexandrescu, D., Papavramidou, P. & Maniatakos, M. (eds.). IEEE, p. 121-124 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  403. Published

    An HF magnetospheric radar for EISCAT

    Rietveld, M. T., Honary, F., Robinson, T. R., Thide, B. & Stubbee, P., 1997, Proceedings of the 8th EISCAT international workshop. Leicester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  404. Published

    Hf-pump-induced parametric instabilities in the auroral E-region

    Rietveld, M. T., Isham, B., Grydeland, T., Hoz, C. L., Leyser, T. B., Honary, F., Ueda, H., Kosch, M. & Hagfors, T., 2002, In: Advances in Space Research. 29, 9, p. 1363-1368 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  405. Published

    Fault diagnosis in multi-machine power systems using the Derivative-free nonlinear Kalman Filter

    Rigatos, G., Siano, P., Wira, P. & Ma, X., 13/06/2016, Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016 IEEE Workshop on. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  406. Published

    A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, D. D., Yin, M., del Castillo, P. E. J. R. D. & van der Zwaag, S., 15/10/2009, In: Materials Science and Engineering: A. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  407. Published

    Strength-toughness optimisation scenarios through interrupted ageing in AA6061 and AA2024

    Risanti, D. D., Rivera-Díaz-del-Castillo, P. E. J. & Van Der Zwaag, S., 2008, Aluminum Alloys: Fabrication, Characterization and Applications - Proceedings of Symposia held during TMS 2008 Annual Meeting and Exhibition. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  408. Published

    Observed characteristics of sudden commencement absorption.

    Ritchie, S. E. & Honary, F., 04/2009, In: Journal of Atmospheric and Solar-Terrestrial Physics. 71, 5, p. 609-617 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  409. Published

    Storm sudden commencement and its effect on high-latitude HF communication links

    Ritchie, S. E. & Honary, F., 25/06/2009, In: Space Weather. 7, S06005, p. 1-20 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  410. Published

    Observations on the variability and screening effect of sporadic-E

    Ritchie, S. E. & Honary, F., 08/2009, In: Journal of Atmospheric and Solar-Terrestrial Physics. 71, 12, p. 1353-1364 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  411. Published

    Advances in ionospheric propagation modelling at high-latitudes

    Ritchie, S. E. & Honary, F., 28/04/2009, p. 32-38. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  412. Published

    Prediction of sudden commencement absorption

    Ritchie, S. E. & Honary, F., 04/2006, p. 113-116. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  413. Published

    Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz Del Castillo, P. E. J., Reischig, P. & Van Der Zwaag, S., 04/2005, In: Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  414. Published

    A statistical mechanics theory of grain deformation and its prediction of dynamical recovery and recrystallization

    Rivera Díaz Del Castillo, P. E. J. & Van Der Zwaag, S., 2004, In: Materials Science Forum. 467-470, I, p. 87-92 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  415. Published

    Statistical mechanics prediction of solid-solid transformations induced by plastic deformation

    Rivera Díaz Del Castillo, P. E. J., Huang, M. & Van Der Zwaag, S., 2005, Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005. Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Vol. 1. p. 621-628 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  416. Published

    Tailoring dynamic recrystallization in Ni- and Fe-base high temperature alloys

    Rivera-Diaz-del-Castillo, P. & Galindo-Nava, E., 2013, Recrystallization and Grain Growth V. Vol. 753. p. 427-430 4 p. (Materials Science Forum; vol. 753).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  417. Published

    Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms

    Rivera-Diaz-del-Castillo, P. E. J., de Jong, M. & Sluiter, M. H. F., 20/04/2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. John Wiley and Sons Inc., Vol. 2. p. 477-484 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  418. Published

    Heat treatment and composition optimization of nanoprecipitation hardened alloys

    Rivera-Diaz-Del-Castillo, P. E. J. & Xu, W., 11/04/2011, In: Materials and Manufacturing Processes. 26, 3, p. 375-381 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  419. Published

    Rolling contact fatigue in bearings: Phenomenology and modelling techniques

    Rivera-Díaz-del-Castillo, P. E. J., 2012, Bearing Steel Technologies, 9th Volume: Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies. ASTM International, Vol. 1548 STP. p. 355-381 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  420. Published

    On the origin of ultra-hardness in bearing steels: Two-step bainite transformation processes

    Rivera-Díaz-del-Castillo, P. E. J., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1094-1101 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  421. Published

    On the origin of ultra-hardness in bearing steels: Two-step bainite transformation processes

    Rivera-Díaz-del-Castillo, P. E. J., 2012, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'12, Materials Science and Technology 2012. p. 295-302 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  422. Published

    Genetic alloy design of ultra high strength stainless steels: From thermodynamics to quantum mechanics

    Rivera-Díaz-del-Castillo, P. E. J., Xu, W. & Van Der Zwaag, S., 2010, THERMEC 2009. 5 ed. Vol. 638-642. p. 3473-3478 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  423. Published

    Growth of needle and plate shaped particles: Theory for small supersaturations, maximum velocity hypothesis

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 25-29 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  424. Published

    Theory for growth of spherical precipitates with capillarity effects

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 30-32 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  425. Published

    Understanding microstructural transitions occurring under rolling contact fatigue

    Rivera-Díaz-Del-Castillo, P. E. J., 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, Vol. STP 1580. p. 550-563 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  426. Published

    Computational design of nanostructured steels employing irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J., Hayashi, K. & Galindo-Nava, E. I., 10/2013, In: Materials Science and Technology (United Kingdom). 29, 10, p. 1206-1211 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  427. Published

    Dislocation annihilation in plastic deformation: I. Multiscale irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J. & Huang, M., 04/2012, In: Acta Materialia. 60, 6-7, p. 2606-2614 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  428. Published

    Precipitate coarsening in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J., 07/2002, In: Scripta Materialia. 47, 2, p. 113-117 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  429. Published

    Theory for growth of needle-shaped particles in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2002, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 33, 4, p. 1075-1081 7 p., 209.

    Research output: Contribution to journalJournal articlepeer-review

  430. Published

    Assuring microstructural homegeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 11/2004, In: Steel Research International. 75, 11, p. 711-715 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  431. Published

    Assurring microstructural homogeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 2004, Multiscaling in Applied Science and Emerging Technology; Fundamentals and Applications in Mesomechanics: Proceedings of the Sixth International Conference for Mesomechanics. Sih, G. C., Kermanidis, T. B. & Pantelakis, S. G. (eds.). p. 261-265 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  432. Published

    A model for ferrite/pearlite band formation and prevention in steels

    Rivera-Díaz-Del-Castillo, P. E. J., Sietsma, J. & Van Der Zwaag, S., 02/2004, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 35 A, 2, p. 425-433 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  433. Published

    Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera-Díaz-Del-Castillo, P. E. J., Reischig, P., Xu, W. & Van Der Zwaag, S., 11/2005, In: Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  434. Published

    Strengthening mechanisms in high-entropy alloys: Perspectives for alloy design

    Rivera-Díaz-Del-Castillo, P. E. J. & Fu, H., 14/10/2018, In: Journal of Materials Research. 33, 19, p. 2970-2982 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  435. Published

    You talk – but what does it type.

    Roberts, P. E., Joyce, M. J. & Philpott, C., 23/02/2004, In: Speech and Language Therapy in Practice. p. 16-19 4 p.

    Research output: Contribution to journalJournal article

  436. Published

    Speech recognition software for dysarthric speakers.

    Roberts, P. & Joyce, M. J., 2003, Proceedings of the 5th European CPLOL congress.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  437. Published

    State-dependent system identification for control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D., Taylor, C. J. & Lokuciewski, C., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  438. Published

    Low-level joint control of a robotic manipulator using state-dependent parameter models

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  439. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  440. Published

    RF heating in a strong auroral electrojet

    Robinson, T. R., Bond, G., Eglitis, P., Honary, F. & Rietveld, M. T., 1998, In: Advances in Space Research. 21, 5, p. 689-692 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  441. Published

    A Resonance Broadening Kinetic Theory of the Modified-two-stream Instability: Implications for Radar Auroral Backscatter Experiments

    Robinson, T. R. & Honary, F., 1/02/1990, In: Journal of Geophysical Research. 95, A2, p. 1073-1085 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  442. Published

    Adiabatic and Isothermal Ion-acoustic Speeds of Stable Farley-Buneman Waves in the Auroral E Region

    Robinson, T. R. & Honary, F., 1993, In: Journal of Atmospheric and Terrestrial Physics. 55, 1, p. 65-77 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  443. Published

    First EISCAT observations of the modification of F-region electron temperatures during RF heating at harmonics of the electron gyro frequency

    Robinson, T. R., Honary, F., Stocker, A. J., Jones, T. B. & Stubbe, P., 3/01/1996, In: Journal of Atmospheric and Terrestrial Physics. 58, 1-4, p. 385-395 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  444. Published

    Factors influencing the heating of the auroral electrojet by high power radio waves

    Robinson, T. R., Honary, F., Stocker, A. & Jones, T. B., 1995, In: Advances in Space Research. 15, 12, p. 41-44 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  445. Published

    Foam formation in low expansion fire fighting equipment.

    Roger, L. E., Widden, M. B. & Osborne, M. J., 2000, Proceedings of the Eurofoam 2000 conference. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  446. Published

    Foam formation in low expansion fire fighting equipment

    Rogers, L., 2001, Lancaster University. 210 p.

    Research output: ThesisDoctoral Thesis

  447. Published

    Polarization-induced Fano resonances using wire-grid metasurfaces for the THz region: Metamaterials, Metadevices, and Metasystems 2020

    Romain, X., Degl'Innocenti, R., Baida, F. I., Boyer, P., N., E. (ed.), M.A., N. (ed.), N.I., Z. (ed.) & (SPIE), T. S. O. P-O. I. E., 20/08/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  448. Published

    Tunable Polarization-Induced Fano Resonances in Stacked Wire-Grid Metasurfaces

    Romain, X., Degl'Innocenti, R., Baida, F. I. & Boyer, P., 3/06/2021, In: Communications Physics. 4, 5 p., 115.

    Research output: Contribution to journalJournal articlepeer-review

  449. Published

    Polyurethane membranes modified with isopropyl myristate as a potential candidate for encapsulating electronic implants: A study of biocompatibility and water permeability

    Roohpour, N., Wasikiewicz, J. M., Moshaverinia, A., Paul, D., Grahn, M. F., Rehman, I. U. & Vadgama, P., 2010, In: Polymers. 2, 3, p. 102-119 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  450. Published

    Isopropyl myristate-modified polyether-urethane coatings as protective barriers for implantable medical devices

    Roohpour, N., Wasikiewicz, J. M., Moshaverinia, A., Paul, D., Rehman, I. U. & Vadgama, P., 2009, In: Materials. 2, 3, p. 719-733 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  451. Published

    Synthesis and characterisation of enhanced barrier polyurethane for encapsulation of implantable medical devices

    Roohpour, N., Wasikiewicz, J. M., Paul, D., Vadgama, P. & Rehman, I. U., 2009, In: Journal of Materials Science: Materials in Medicine. 20, 9, p. 1803-1814 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  452. Published

    Accurate vehicular positioning using a DAB-GSM hybrid system

    Rooney, S., Chippendale, P., Choony, R., Roux, C. L. & Honary, B., 05/2000, Vehicular Technology Conference Proceedings, 2000. VTC 2000-Spring Tokyo. 2000 IEEE 51st. Tokyo, Japan: IEEE, p. 97-101 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  453. Published

    Modelling techniques for reliability prediction in MEMS technologies.

    Rosing, R. & Richardson, A. M. D., 2003, Proceedings of the Nanotech 2003 conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  454. Published

    Generation of component level fault models for MEMS.

    Rosing, R., Reichenbach, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of the 7th international mixed-signal testing workshop (IMSTW ’01). p. 40-45 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  455. Published

    Fault simulation and modelling of microelectromechanical systems.

    Rosing, R., Lechner, A., Richardson, A. M. D. & Dorey, A. P., 2000, In: IEE Journal on Computing and Control Engineering. 11, 5, p. 242-250 9 p.

    Research output: Contribution to journalJournal article

  456. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  457. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  458. Published

    Fault simulation for MEMS

    Rosing, R., Richardson, A., Dorey, A. & Peyton, A., 1/06/1999, Intelligent and Self-Validating Sensors (Ref. No. 1999/160), IEE Colloquium on. p. 7/1 -7/6

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  459. Published

    Generation of component level fault models for MEMS

    Rosing, R., Reichenbach, R. & Richardson, A., 2002, In: Microelectronics Journal. 33, 10, p. 861-868 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  460. Published

    Clock switching: a new design for current test (DcT) method for dynamic logic circuits

    Rosing, R., Richardson, A. M. D., Kerkhoff, A. & Acosta, A., 1998, IDDQ Testing, 1998. Proceedings. 1998 IEEE International Workshop on. IEEE, p. 20-25 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  461. Published

    Generation of MEMS component models using Cosserat symbolic simulations

    Rosing, R., Wang, C., Tucker, R., Richardson, A. & De Masi, B., 2002, SPIE Proceedings: design, test, integration, and packaging of MEMS/MOEMS 2002. Vol. 4755. p. 149-154 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  462. Published

    Vitamin D and peak bone mass in UK South Asian women

    Roy, D. K., Berry, J. L., Adams, J. E., Swarbrick, C. M., King, Y., Pye, S. R., Silman, A. J. & O', N. T. W., 2004, In: Osteoporosis International. 15, Supplement 2, p. S9 1 p.

    Research output: Contribution to journalJournal articlepeer-review

  463. Published

    Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids

    Rubbi, F., Habib, K., Saidur, R., Aslfattahi, N., Yahya, S. M. & Das, L., 15/09/2020, In: Solar Energy. 208, p. 124-138 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  464. Published

    State-of-the-art review on water-based nanofluids for low temperature solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Rahman, M. T., 15/09/2021, In: Solar Energy Materials and Solar Cells. 230, 40 p., 111220.

    Research output: Contribution to journalJournal articlepeer-review

  465. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to journalJournal articlepeer-review

  466. Published

    High-pressure phase behaviour of binary (CO2 + nicotine) and ternary (CO2 + nicotine plus solanesol) mixtures

    Ruiz-Rodriguez, A., Najdanovic, V., Visak, Z. P., Bronze, M. D. R., Antunes, C. & da Ponte, M. N., 15/08/2009, In: Fluid Phase Equilibria. 282, 1, p. 58-64 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  467. Published

    High-pressure phase behaviour of nicotine / carbon dioxide system

    Ruiz-Rodríguez, A., Najdanovic-Visak, V. & Nunes da Ponte, M., 2008.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  468. Published

    The monitoring of pile construction to assess integrity and load carrying capacity of CFA piles.

    Rust, M., Clayton, C., Mure, N., Scott, J., Seward, D. & Quayle, S., 2004, p. 1565-1569. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  469. Published

    SpaciMS: spatial and temporal operando resolution of reactions within catalytic monoliths

    Sá, J., Fernandes, D. L. A., Aiouache, F., Goguet, A., Hardacre, C., Lundie, D., Naeem, W., Partridge, W. P. & Stere, C., 2010, In: Analyst. 135, 9, p. 2260-2272 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  470. Published

    Greener synthesis of dimethyl carbonate using a novel tin-zirconia/graphene nanocomposite catalyst

    Saada, R., Aboelazayem, O., SUELA, KELLICI., Heil, T., Morgan, D., Lampronti, G. & Saha, B., 15/06/2018, In: Applied Catalysis B: Environmental. 226, p. 451-462 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  471. Published

    Graphene/fly ash geopolymeric composites as self-sensing structural materials

    Saafi, M., Tang, L., Fung, J., Rahman, M., Sillars, F., Liggat, J. & Zhou, X., 2014, In: Smart Materials and Structures. 23, 6, 10 p., 065006.

    Research output: Contribution to journalJournal articlepeer-review

  472. Published

    Enhanced properties of graphene/fly ash geopolymeric composite cement

    Saafi, M., Tang, L., Fung, J., Rahman, M. & Liggat, J., 01/2015, In: Cement and Concrete Research. 67, p. 292-299 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  473. Published

    Hybrid graphene/geopolymeric cement as a superionic conductor for structural health monitoring applications

    Saafi, M. B. S., Piukovics, G. & Ye, J., 20/09/2016, In: Smart Materials and Structures. 25, 10, 11 p., 105018.

    Research output: Contribution to journalJournal articlepeer-review

  474. Published

    Inherently multifunctional geopolymeric cementitious composite as electrical energy storage and self-sensing structural material

    Saafi, M. B. S., Gullane, A., Huang, B., Sadeghi, H., Ye, J. & Sadeghi, F., 1/10/2018, In: Composite Structures. 201, p. 766-778 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  475. Published

    Assessing the environmental performance of NADH regeneration methods: A cleaner process using recyclable Pt/Fe3O4 and hydrogen

    Saba, T., Burnett, J. W. H., Li, J., Wang, X., Anderson, J. A., Kechagiopoulos, P. N. & Wang, X., 1/01/2020, In: Catalysis Today. 339, p. 281–288 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  476. Published

    A facile analytical method for reliable selectivity examination in cofactor NADH regeneration

    Saba, T., Burnett, J. W. H., Li, J., Kechagiopoulos, P. N. & Wang, X., 25/01/2020, In: Chemical Communications. 56, 8, p. 1231-1234 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  477. Published

    NADH regeneration: a case study of Pt-catalyzed NAD+ reduction with H2

    Saba, T., Li, J., Burnett, J. W. H., Howe, R. F., Kechagiopoulos, P. N. & Wang, X., 1/01/2021, In: ACS Catalysis. 11, 1, p. 283–289 7 p.

    Research output: Contribution to journalLetterpeer-review

  478. Published

    UV-LIGA Microfabrication of 0.3 THz Double Corrugated Waveguide

    Sabaawi, A., Doychinov, V., Mathisen, S., David Paul, S., Letizia, R. & Paoloni, C., 9/02/2018, IVEC 2017 - 18th International Vacuum Electronics Conference. IEEE, 2 p. (IVEC 2017 - 18th International Vacuum Electronics Conference; vol. 2018-January).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  479. Published

    Synthesis and characterization of cellulose/hydroxyapatite based dental restorative composites

    Sabir, M., Ali, A., Siddiqui, U., Muhammad, N., Khan, A. S., Sharif, F., Iqbal, F., Shah, A. T., Rahim, A. & Rehman, I. U., 21/09/2020, In: Journal of Biomaterials Science, Polymer Edition. 31, 14, p. 1806-1819 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  480. Published

    Defect prevention in selective laser melting components: Compositional and process effects

    Sabzi, H. E. & Rivera-Díaz-del-Castillo, P. E. J., 18/11/2019, In: Materials. 12, 22, 15 p., 3791.

    Research output: Contribution to journalJournal articlepeer-review

  481. Published

    Controlling crack formation and porosity in laser powder bed fusion: Alloy design and process optimisation

    Sabzi, H. E., Maeng, S., Liang, X., Simonelli, M., Aboulkhair, N. T. & Rivera-Díaz-del-Castillo, P. E. J., 1/08/2020, In: Additive Manufacturing. 34, 14 p., 101360.

    Research output: Contribution to journalJournal articlepeer-review

  482. Published

    Grain refinement in laser powder bed fusion: The influence of dynamic recrystallization and recovery

    Sabzi, H. E., Aboulkhair, N. T., Liang, X., Li, X. H., Simonelli, M., Fu, H. & Rivera-Díaz-del-Castillo, P. E. J., 30/11/2020, In: Materials and Design. 196, 10 p., 109181.

    Research output: Contribution to journalJournal articlepeer-review

  483. Published

    Deformation twinning-induced dynamic recrystallization during laser powder bed fusion

    Sabzi, H. E., Li, X-H., Zhang, C., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/01/2022, In: Scripta Materialia. 207, 114307.

    Research output: Contribution to journalJournal articlepeer-review

  484. Published

    Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering

    Sabzi, H. E., Hernandez-Nava, E., Li, X-H., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/12/2021, In: Materials and Design. 212, 17 p., 110246.

    Research output: Contribution to journalJournal articlepeer-review

  485. Published

    A modified proportional guidance law for homming missiles by using of nonlinear filters

    Sadeghi, H., Poshtan, J. & Montazeri, A., 2008, Mechatronics and Its Applications, 2008. ISMA 2008. 5th International Symposium on. New York: IEEE, p. 350-355 6 p. (International Symposium on Mechatronics and its Applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  486. Published

    Modification of polyethylene glycol with choline chloride and evaluation of the CO2 absorption capacity of their aqueous solutions

    Sadeghpour, M., Yusoff, R., Aroua, M. K. & Tabandeh, M., 1/04/2018, In: Greenhouse Gases: Science and Technology. 8, 2, p. 324-334 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  487. Published

    Event-Triggered Based State Estimation for Autonomous Operation of an Aerial Robotic Vehicle

    Sadeghzadeh Nokhodberiz, N., Nemati, H. & Montazeri, A., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2348-2353 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  488. Published

    Dynamics-Based Modified Fast Simultaneous Localisation and Mapping for Unmanned Aerial Vehicles with Joint Inertial Sensor Bias and Drift Estimation

    Sadeghzadeh Nokhodberiz, N., Can, A., Stolkin, R. & Montazeri, A., 24/08/2021, In: IEEE Access. 9, p. 120247-120260 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  489. Published

    Geomagnetic disturbances on ground associated with particle precipitation during SC

    Safargaleev, V., Kozlovsky, A., Honary, F., Voronin, A. & Turunen, T., 22/01/2010, In: Annales Geophysicae. 28, 1, p. 247-265 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  490. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys

    Safdar, S., Pinkerton, A. J., Li, L., Sheikh, M. & Withers, P., 1/02/2013, In: Applied Mathematical Modelling. 37, 3, p. 1187-1195 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  491. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools

    Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  492. Published

    Health monitoring of aircraft wiring by acoustic method

    Saha, S., Xu, Z., Koltsov, D., Richardson, A. & Sutherland, A., 2009, 2009 IEEE AEROSPACE CONFERENCE, VOLS 1-7. NEW YORK: IEEE, p. 3744-3753 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  493. Published

    A continuous process for the liquid phase epoxidation of an olefinic compound

    Saha, B., Ambroziak, K., Sherrington, DC. & Mbeleck, R., 17/04/2018, Patent No. Indian Patent No.: 295846

    Research output: Patent

  494. Published

    Carbon dioxide utilization by graphene based nanocomposite materials as catalysts

    Saha, B., 22/03/2017, International Conference on Nanotechnology Applications: Chemical, Energy and Environment (NACEE-2017).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  495. Published

    A permeable particle container

    Saha, B., Ambroziak, K., Sherrington, DC. & Mbeleck, R., 7/12/2016, Patent No. Chinese Patent No.: ZL 201410840925.7

    Research output: Patent

  496. Published

    A continuous-flow apprach to alkene epoxidation catalysed by Polystyrene 2-(Aminomethyl)Pyridine supported Mo(VI) complex

    Saha, B., Mohammed, ML. & Mbeleck, R., 19/06/2016, 5th International Conference on Green Process Engineering (GPE 2016). Berruti, F. & Briens, C. (eds.). (An ECI Conference Series; vol. 16AG).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  497. Published

    Greener and Sustainable Alkene Epoxidation Process

    Saha, B., Mohammed, ML. & Mbeleck, R., 8/11/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  498. Published

    Implications of beam filling patterns on the design of recirculating Energy Recovery Linacs

    Saitiniyazi, S., Apsimon, R. & Williams, P., 17/07/2020, In: Physical Review Accelerators and Beams. 23, 7, 17 p., 072002.

    Research output: Contribution to journalJournal articlepeer-review

  499. Published

    Filling Pattern Dependence of Regenerative Beam Breakup Instability in Energy Recovery Linacs

    Saitiniyazi, S., Apsimon, R. & Williams, P., 23/06/2021, In: Physical Review Accelerators and Beams. 24, 6, p. 1-10 10 p., 061003.

    Research output: Contribution to journalJournal articlepeer-review

  500. Published

    Pushing the Capture Limit of Thermionic Gun Linacs

    Saitiniyazi, S., Castilla Loeza, A., McKenzie, J., Apsimon, R., Militsyn, B., Angal-Kalinin, D. & Burt, G., 16/08/2021, In: Physical Review Accelerators and Beams. 24, 8, 12 p., 080401.

    Research output: Contribution to journalJournal articlepeer-review

Back to top