Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published

    A Comparative Study on Colloidal Nanosilica Incorporation in Polymer-Modified Cement Mortars

    Zabihi, N. & Özkul, M. H., 2018, International Congress on Polymers in Concrete. p. 675-681 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  2. Published

    A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings

    Yuan, W., Li, R., Chen, Z., Gu, J. & Tian, Y., 15/01/2021, In: Surface and Coatings Technology. 405, 13 p., 126582.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. Published

    A comparative study on the aqueous photodegradation of two organophosphorus pesticides under simulated and natural sunlight.

    Weber, J., Halsall, C. J., Wargent, J. J. & Paul, N. D., 2009, In: Journal of Environmental Monitoring. 11, 3, p. 654-659 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Unpublished

    A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050

    Appleby, M., Lambert, C. & Rennie, A., 12/2009, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  6. Published

    A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators

    Akurugoda Gamage, K. & Joyce, M., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  7. Published

    A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators

    Gamage, K., Joyce, M. & Taylor, G., 08/2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1432-1437 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  9. Published

    A comparison of four different digital algorithms for pulse-shape discrimination in fast scintillators.

    Gamage, K. A. A., Joyce, M. & Hawkes, N. P., 21/06/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 642, 1, p. 78-83 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    A comparison of Geant4 and MCNP for modelling liquid scintillators

    Balmer, M., Gamage, K. & Taylor, G., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  11. Published

    A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders

    Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, PJ., DeLemos, ACS., Tojeira, APO., Pereira, AMH., Mateus, AJ., Mendes, ALA., DosSantos, C., Freitas, DMF., Bartolo, HM., Almeida, HD., IM, D., Dias, JR., Domingos, MAN., Alves, NMF., Pereira, RFB., Patricio, TMF. & Ferreira, TMD. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  12. Published

    A comparison of MCNP6-1.0 and GEANT 4-10.1 when evaluating the neutron output of a complex real world nuclear environment: the thermal neutron facility at the Tri Universities Meson facility

    Monk, S. D., Shippen, A., Colling, B. R., Cheneler, D., Al Hamrashdi, H. & Alton, T., 15/05/2017, In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 399, p. 48-61 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  13. Published

    A comparison of models of the isometric force of locust skeletal muscle in response to pulse train inputs

    Wilson, E. D., Rustighi, E., Newland, P. L. & Mace, B. R., 03/2012, In: Biomechanics and modeling in mechanobiology. 11, 3-4, p. 519–532 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    A comparison of plutonium abundance in soil from sites in the United Kingdom measured with high-efficiency, high-resolution γ-ray spectroscopy, neutron assay and accelerator mass spectrometry

    Tighe, C., Christl, M., Degueldre, C., Andrew, J. & Joyce, M. J., 9/09/2018, Plutonium Futures: The Science 2018. San Diego: American Nuclear Society, p. 158-160 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  15. Published

    A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting

    Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material

    Zakir, M., Kheraif, A. A. A. A., Asif, M., Wong, F. S. L. & Rehman, I. U., 2013, In: Dental Materials. 29, 4, p. e53-e59

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    A Comparison of γ-ray Spectroscopy with Accelerator Mass Spectrometry for the Environmental Assay of Plutonium

    Joyce, M. J., Tighe, C., Campbell, I., Christl, M., Degueldre, C., Iridoy, M. C., Semple, K. T. & Andrew, J., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  18. Published

    A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In: Journal of Materials Science. 48, 24, p. 8493-8500 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    A comprehensive analytical model for laser powder-fed additive manufacturing

    Huang, Y., 31/10/2016, In: Additive Manufacturing. 12, A, p. 90-99

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    A Comprehensive Business Model for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    A Comprehensive Review of Distributed MPPT for Grid-Tied PV Systems at the Sub-Module Level

    Alharbi, Y., Darwish, A. & Ma, X., 19/07/2023, In: Energies. 16, 14, p. 5468 23 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts

    Farooqi, A. S., Yusuf, M., Mohd Zabidi, N. A., Saidur, R., Sanaullah, K., Khan, A. & Abdullah, B., 1/09/2021, In: International Journal of Hydrogen Energy. 46, 60, p. 31024-31040 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.

    Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Published

    A computational study of preferential diffusion and scalar transport in nonpremixed hydrogen-air flame

    Jiang, J., Jiang, X. & Zhu, M., 7/12/2015, In: International Journal of Hydrogen Energy. 40, 45, p. 15709-15722 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  26. Published

    A computationally efficient adaptive IIR solution to active noise and vibration control systems

    Montazeri, A. & Poshtan, J., 11/2010, In: IEEE Transactions on Automatic Control. 55, 11, p. 2671-2676 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)

    Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  28. Published

    A computer-controlled dynamic phantom for respiratory-gated medical radiotherapy research

    Bandala Sánchez, M. & Joyce, M., 07/2013, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences . E96-A, 7, p. 1609-1616 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    A conceptual study for a computer-based tool to support electronics design in a mechatronic environment.

    Bradley, D. A., Walters, R. M. & Dorey, A. P., 2000, In: Microprocessors and Microsystems. 24, 2, p. 51-61 11 p.

    Research output: Contribution to Journal/MagazineJournal article

  30. Published

    A condition monitoring system for an early warning of developing faults in wind turbine electrical systems

    Ma, X., Cross, P. & Qian, P., 1/12/2016, In: Insight – Non-Destructive Testing and Condition Monitoring. 58, 12, p. 663-670 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  31. Published

    A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., Rivera-Díaz-del-Castillo, P. E. J., Bouaziz, O. & van der Zwaag, S., 09/2009, In: Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    A continuous process for the liquid phase epoxidation of an olefinic compound

    Saha, B., Ambroziak, K., Sherrington, DC. & Mbeleck, R., 17/04/2018, Patent No. Indian Patent No.: 295846

    Research output: Patent

  33. Published

    A continuous-flow apprach to alkene epoxidation catalysed by Polystyrene 2-(Aminomethyl)Pyridine supported Mo(VI) complex

    Saha, B., Mohammed, ML. & Mbeleck, R., 19/06/2016, 5th International Conference on Green Process Engineering (GPE 2016). Berruti, F. & Briens, C. (eds.). (An ECI Conference Series; vol. 16AG).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  34. Published

    A control system for a new wave energy converter in irregular wave climates.

    Aggidis, G. A., Rahmati, M. T., Chaplin, R. V., McCabe, A. P., Mingham, C. G., Causon, D. M. & Bhinder, M. A., 06/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  35. Published

    A cooperative management strategy for battery energy storage system providing enhanced frequency response

    Cao, X. & Zhao, N., 30/04/2022, In: Energy Reports. 8, p. 120-128 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  36. Published

    A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  37. Published

    A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite

    Greco, A. & Jiang, X., 31/05/2016, In: Journal of Power Sources. 315, p. 127-139 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    A creativity aid for designers.

    French, M. J., Chaplin, R. V. & Langdon, P. M., 1993, Proceedings of ICED '93. Zurich: Heurista

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  39. Published

    A criterion for the formation of high entropy alloys based on lattice distortion

    Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/04/2016, In: Intermetallics. 71, p. 76-87 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  40. Published

    A Current-Source Modular Converter for Large-Scale Photovoltaic Systems

    Alotaibi, S., 2023, Lancaster University. 225 p.

    Research output: ThesisDoctoral Thesis

  41. Published

    A Data-Driven Statistical Approach for Monitoring and Analysis of Large Industrial Processes

    Montazeri, A., Ansarizadeh, M. H. & Arefi, M., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2354-2359 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Unpublished

    A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads

    Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.

    Research output: ThesisDoctoral Thesis

  43. Published

    A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads

    Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    A Dependable Microelectronic Peptide Synthesizer Using Electrode Data

    Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    A design for testability study on a high performance automatic gain control circuit.

    Lechner, A., Richardson, A. M. D., Hermes, B. & Ohletz, M., 1998, Proceedings of the 16th IEEE VLSI test symposium. IEEE, p. 376-385 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  46. Published

    A design-for-test structure for optimising analogue and mixed signal IC test

    Bratt, A., Richardson, A. M. D., Harvey, R. & Dorey, A. P., 03/1995, European Design and Test Conference. IEEE, p. 24-33 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  47. Published

    A detailed thermodynamic analysis of [C(4)mim][BF4] plus water as a case study to model ionic liquid aqueous solutions

    Rebelo, LPN., Najdanovic-Visak, V., Visak, Z. P., da Ponte, MN., Szydlowski, J., Cerdeirina, CA., Troncoso, J., Romani, L., Esperanca, JMSS., Guedes, HJR. & de Sousa, HC., 2004, In: Green Chemistry. 6, 8, p. 369-381 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  48. Published

    A Development and validation of the in-house hydrodynamics code and the DNV software for TALOS wave energy converter

    Sheng, W., Michailides, C., Loukogeorgaki, E. & Aggidis, G., 2/09/2023, p. 1-8. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  49. Published

    A digital approach to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator detector

    Gamage, K., Joyce, M. & Taylor, G., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1223-1227 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.

    Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    A digital partial built-in self-test structure for a high performance automatic gain control circuit

    Lechner, A., Ferguson, J., Richardson, A. & Hermes, B., 1999, DESIGN, AUTOMATION AND TEST IN EUROPE CONFERENCE AND EXHIBITION 1999, PROCEEDINGS. Borrione, D. & Ernst, R. (eds.). LOS ALAMITOS: IEEE COMPUTER SOC, p. 232-238 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  52. Published

    A dual-arm, hydraulically-actuated robot for operations within radiological environments

    Albrecht, O., Monk, S. D., Bandala Sanchez, M., Montazeri, A. & Taylor, J., 1/10/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  53. Published

    A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences

    Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  54. Published

    A dynamic model for the planetary bearings in a double planetary gear set

    Liu, J., Li, X. & Xia, M., 1/07/2023, In: Mechanical Systems and Signal Processing. 194, 23 p., 110257.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  55. Published

    A dynamic model of the jump-to phenomenon during AFM analysis

    Bowen, J. & Cheneler, D., 18/12/2012, In: Langmuir. 28, 50, p. 17273-17286 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  56. Published

    A European Project on Vacuum Tube Amplifiers for THz Amplification

    Paoloni, C., Di Carlo, A., Brunetti, F., Mineo, M., Ulisse, G., Durand, A. J., Krozer, V., Kotiranta, M., Rossi, A., Dolfi, D., Legagneux, P., Fiorello, A. M., Dispenza, M., Secchi, A., Zhurbenko, V., Megtert, S., Boumrane, F., Bouvet, T., Cojocaru, C. -S. & Gohier, A., 09/2012, 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. China

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  57. Published

    A facile analytical method for reliable selectivity examination in cofactor NADH regeneration

    Saba, T., Burnett, J., Li, J., Kechagiopoulos, P. N. & Wang, X., 25/01/2020, In: Chemical Communications. 56, 8, p. 1231-1234 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  58. Published

    A facile and greener synthesis of butylene carbonate via CO2 utilisation using a novel copper–zirconia oxide/graphene catalyst

    Onyenkeadi, V., Aboelazayem, O. & Saha, B., 27/08/2018, The 16th International Conference on Carbon Dioxide Utilization (ICCDU XVI). Rio De Janeiro, Brazil 27 - 30 Aug 2018.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  59. Published

    A facility for the characterisation of planar multilayer structures with preliminary niobium results

    Turner, D., Malyshev, O., Burt, G., Junginger, T., Valizadeh, R. & Gurran, L., 20/07/2022, In: Superconductor Science and Technology. 35, 9, 20 p., 095004.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. Published

    A failure mode analysis of a 6-bit folding ADCs.

    Lechner, A., Richardson, A. M. D., Burbidge, M. & Hermes, B., 2001, Proceedings of the 7th IEEE international mixed-signal testing workshop (IMSTW ’01). p. 19-23 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  61. Published

    A fast and portable imager for neutron and gamma emitting radionuclides

    Al Hamrashdi, H., Cheneler, D. & Monk, S. D., 11/02/2020, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 953, 31 p., 163253.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  62. Published

    A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR

    Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  63. Published

    A fast large-signal model for coupled-cavity TWTS.

    Srivastava, V. & Carter, R. G., 11/1988, In: IEEE Transactions on Electron Devices. 35, 11, Pa, p. 2068-2076 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  64. Published

    A fast model of a 1-D nonlinear beam-wave interaction for a 225 GHz TWT

    Waring, R., Hu, Y. & Paoloni, C., 14/09/2015, 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT). IEEE, p. 1-3 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  65. Published

    A Fast Model of a 1-D Nonlinear Beam-Wave Interaction for a 225GHz TWT

    Waring, R., Hu, Y. & Paoloni, C., 23/06/2015, 8th UK-Europe-China Workshop on mm-waves and THz Technologies . IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  66. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  67. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  68. Published

    A fault-tolerant MEF peptide synthesizer using control and direct sensing electrodes employing current and impedance tests

    Zhang, X., Kerkhoff, H. G., Mailly, F., Nouet, P., Liu, H. & Richardson, A., 1/06/2007, 13th International mixed signals testing workshop and 3rd international GHz/Gbps test workshop, Póvoa de Varzim, Portugal. Portugal: University of Porto, p. 176-181 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  69. Published

    A feasibility study into the use of wavelet transform in partial discharge analysis.

    Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  70. Published

    A field-portable, laser-diode spectrometer for the ultra-sensitive detection of hydrocarbon gases

    Gibson, G., Monk, S. D. & Padgett, M., 04/2002, In: Journal of Modern Optics. 49, 5-6, p. 769-776 8 p.

    Research output: Contribution to Journal/MagazineJournal article

  71. Published

    A finite-element 3-D method for the design of TWT collectors

    D'Agostino, S. & Paoloni, C., 20/07/2000, In: Microwave and Optical Technology Letters. 26, 2, p. 119-122 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  72. Published

    A first comparison of irregularity and ion drift velocity measurements in the E-region

    Makarevich, R. A., Honary, F., Howells, V. S. C., Koustov, A. V., Milan, S. E., Davies, J. A., Senior, A., McCrea, I. W. & Dyson, P. L., 09/2006, In: Annales Geophysicae. 24, 9, p. 2375-2389 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  73. Published

    A First Step towards Zero Nuclear Waste—Advanced Strategic Thinking in Light of iMAGINE

    Merk, B., Detkina, A., Litskevich, D., Patel, M., Noori-kalkhoran, O., Cartland-Glover, G., Efremova, O., Bankhead, M., Degueldre, C. & Del Nevo, A. (ed.), 30/09/2022, In: Energies. 15, 19, 21 p., 7209.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  74. Published

    A flexible real-time transputer based control system.

    Nagy, Z. & Bradshaw, A., 1996, Proceedings of the 5th UK mechatronics forum international conference. Portugal

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  75. Published

    A flexible streaming software architecture for scientific instruments

    Grill, M., Barratt, K. & Honary, F., 13/02/2010, In: Earth Science Informatics. p. 1-7 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  76. Published

    A flexible, transputer based robot control.

    Nagy, Z. & Bradshaw, A., 1996, Proceedings of the international workshop on advanced robotics and intelligent machines. Manchester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  77. Published

    A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium.

    Bissessur, Y. & Peyton, A. J., 2002, Proceedings of the 2nd international symposium on process tomography.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  78. Published

    A framework for defining sustainable energy transitions: principles, dynamics, and implications

    Sgouridis, S. & Csala, D., 2/05/2014, In: Sustainability. 6, 5, p. 2601-2622 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  79. Published

    A framework of design weakness detection through machine health monitoring for the evolutionary design optimization of multi-domain systems

    Xia, M. & De Silva, C. W., 15/10/2014, Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014. Institute of Electrical and Electronics Engineers Inc., p. 205-210 6 p. 6926455. (Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Unpublished

    A Frequency-Response Design Method for the Control of Wave Energy Converters in Irregular Seas.

    McCabe, A. P., Stables, M. A. & Aggidis, G. A., 2010, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  81. Published

    A Fuzzy Data-Driven Paradigmatic Predictor

    Amirjavid, F., Nemati, H. & Barak, S., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2366-2371 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  82. Published

    A Fuzzy Paradigmatic Clustering Algorithm

    Amirjavid, F., Barak, S. & Nemati, H., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2360-2365 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  83. Published

    A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition

    Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  84. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 2016, In: IFAC-PapersOnLine. 49, 12, p. 1261-1266 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 28/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  86. Published

    A genetic evolved machine learning approach for 3D DEM modelling of anisotropic materials with full consideration of particulate interactions

    Gu, Z., Ding, X., Hou, X. & Ye, J., 1/02/2023, In: Composites Part B: Engineering. 250, 11 p., 110432.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  87. Published

    A global wire planning scheme for Network-on-Chip.

    Liu, J., Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03.. Vol. 4. p. IV-892-IV-895

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  88. Published

    A global-scale screening of non-native aquatic organisms to identify potentially invasive species under current and future climate conditions

    Vilizzi, L., Copp, G. H., Hill, J. E., Adamovich, B., Aislabie, L., Akin, D., Al-Faisal, A. J., Almeida, D., Azmai, M. N. A., Bakiu, R., Bellati, A., Bernier, R., Bies, J. M., Bilge, G., Branco, P., Bui, T. D., Canning-Clode, J., Cardoso Ramos, H. A., Castellanos-Galindo, G. A., Castro, N., & 176 othersChaichana, R., Chainho, P., Chan, J., Cunico, A. M., Curd, A., Dangchana, P., Dashinov, D., Davison, P. I., de Camargo, M. P., Dodd, J. A., Durland Donahou, A. L., Edsman, L., Ekmekçi, F. G., Elphinstone-Davis, J., Erős, T., Evangelista, C., Fenwick, G., Ferincz, Á., Ferreira, T., Feunteun, E., Filiz, H., Forneck, S. C., Gajduchenko, H. S., Gama Monteiro, J., Gestoso, I., Giannetto, D., Gilles A.S., J., Gizzi, F., Glamuzina, B., Glamuzina, L., Goldsmit, J., Gollasch, S., Goulletquer, P., Grabowska, J., Harmer, R., Haubrock, P. J., He, D., Hean, J. W., Herczeg, G., Howland, K. L., İlhan, A., Interesova, E., Jakubčinová, K., Jelmert, A., Johnsen, S. I., Kakareko, T., Kanongdate, K., Killi, N., Kim, J-E., Kırankaya, Ş. G., Kňazovická, D., Kopecký, O., Kostov, V., Koutsikos, N., Kozic, S., Kuljanishvili, T., Kumar, B., Kumar, L., Kurita, Y., Kurtul, I., Lazzaro, L., Lee, L., Lehtiniemi, M., Leonardi, G., Leuven, R. S. E. W., Li, S., Lipinskaya, T., Liu, F., Lloyd, L., Lorenzoni, M., Luna, S. A., Lyons, T. J., Magellan, K., Malmstrøm, M., Marchini, A., Marr, S. M., Masson, G., Masson, L., McKenzie, C. H., Memedemin, D., Mendoza, R., Minchin, D., Miossec, L., Moghaddas, S. D., Moshobane, M. C., Mumladze, L., Naddafi, R., Najafi-Majd, E., Năstase, A., Năvodaru, I., Neal, J. W., Nienhuis, S., Nimtim, M., Nolan, E. T., Occhipinti-Ambrogi, A., Ojaveer, H., Olenin, S., Olsson, K., Onikura, N., O'Shaughnessy, K., Paganelli, D., Parretti, P., Patoka, J., Pavia R.T.B., J., Pellitteri-Rosa, D., Pelletier-Rousseau, M., Peralta, E. M., Perdikaris, C., Pietraszewski, D., Piria, M., Pitois, S., Pompei, L., Poulet, N., Preda, C., Puntila-Dodd, R., Qashqaei, A. T., Radočaj, T., Rahmani, H., Raj, S., Reeves, D., Ristovska, M., Rizevsky, V., Robertson, D. R., Robertson, P., Ruykys, L., Saba, A. O., Santos, J. M., Sarı, H. M., Segurado, P., Semenchenko, V., Senanan, W., Simard, N., Simonović, P., Skóra, M. E., Slovák Švolíková, K., Smeti, E., Šmídová, T., Špelić, I., Srėbalienė, G., Stasolla, G., Stebbing, P., Števove, B., Suresh, V. R., Szajbert, B., Ta, K. A. T., Tarkan, A. S., Tempesti, J., Therriault, T. W., Tidbury, H. J., Top-Karakuş, N., Tricarico, E., Troca, D. F. A., Tsiamis, K., Tuckett, Q. M., Tutman, P., Uyan, U., Uzunova, E., Vardakas, L., Velle, G., Verreycken, H., Vintsek, L., Wei, H., Weiperth, A., Weyl, O. L. F., Winter, E. R., Włodarczyk, R., Wood, L. E., Yang, R., Yapıcı, S., Yeo, S. S. B., Yoğurtçuoğlu, B., Yunnie, A. L. E., Zhu, Y., Zięba, G., Žitňanová, K. & Clarke, S., 20/09/2021, In: Science of the Total Environment. 788, 16 p., 147868.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  89. Published

    A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction

    Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  90. Published

    A GPS-enabled seabed sediment sampler: Recovery efficiency and efficacy

    Hunt, W. J. & Joyce, M. J., 30/04/2022, In: Review of Scientific Instruments. 93, 4, 7 p., 045104.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  91. Published

    A GPU accelerated modeling of bio-effects associated with magnetic resonance imaging

    Hu, B., Glover, P. & Benson, T., 2011, Computational Problem-Solving (ICCP), 2011 International Conference on . IEEE, p. 431-435 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  92. Published

    A hexagonal grid-based sampling planner for aquatic environmental monitoring using unmanned surface vehicles

    Li, T., Xia, M., Chen, J., Gao, S. & De Silva, C., 27/11/2017, 2017 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3683-3688 6 p. (2017 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2017; vol. 2017-January).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  93. Published

    A high average-current electron source for the Jefferson Laboratory free electron laser

    Hannon, F., 2008, Lancaster University. 225 p.

    Research output: ThesisDoctoral Thesis

  94. Published

    A high speed, multi-frequency impedance analysing node.

    Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 502-510 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  95. Published

    A High Voltage Pulse Generator Based on Sequentially Charged Modular Multilevel Converter Submodules Operating in a Voltage Boost Mode

    Elgenedy, M., Darwish, A., Ahmed, S., Williams, B. & McDonald, J., 10/04/2019, In: IET Power Electronics. 12, 4, p. 749-758 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    A horn antenna improves the transmit field homogeneity in the human brain using the travelling wave technique

    Hu, B., Farhat, S. & Glover, P., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  97. Published

    A housekeeping prognostic health management framework for microfluidic systems

    Khan, H., Al-Gayem, Q. & Richardson, A. M. D., 1/06/2017, In: IEEE Transactions on Device and Materials Reliability. 17, 2, p. 438-449 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  98. Published

    A Hybrid Computing Solution and Resource Scheduling Strategy for Edge Computing in Smart Manufacturing

    Li, X., Wan, J., Dai, H. N., Imran, M., Xia, M. & Celesti, A., 1/07/2019, In: IEEE Transactions on Industrial Informatics. 15, 7, p. 4225-4234 10 p., 8643392.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  99. Published

    A hybrid LSTM-KLD approach to condition monitoring of operational wind turbines

    Wu, Y. & Ma, X., 31/01/2022, In: Renewable Energy. 181, p. 554-566 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  100. Published

    A hybrid plasmonic waveguide terahertz quantum cascade laser

    Degl'Innocenti, R., Shah, Y. D., Wallis, R., Klimont, A., Ren, Y., Jessop, D. S., Beere, H. E. & Ritchie, D. A., 13/08/2015, Proceedings 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference, CLEO/Europe-EQEC 2015. Optical Society of America (OSA), 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

Previous 1 2 3 4 5 6 7 8 ...61 Next

Back to top