Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published

    Surface Defect Detection in non ferromagnetic material using an Electromagnetic Acoustic Transducer

    Thomas, S., Obayya, S., Pinto, D., Dulay, D., Balachandran, W. & Darwish, M., 2009, In: Journal of Materials Science and Engineering. 3, 12

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  2. Published

    Surface Finishing of Metal AM Parts

    Burns, N., Molyneux, A. & Geekie, L., 29/11/2016. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  3. Published

    Surface finishing techniques for SLM manufactured stainless steel 316L components

    Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  4. Published

    Surface Flatness Measurement in Stereolithography

    Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  5. Published

    Surface Meltwater Impounded by Seasonal Englacial Storage in West Greenland

    Kendrick, A. K., Schroeder, D. M., Chu, W., Young, T. J., Christoffersen, P., Todd, J., Doyle, S. H., Box, J. E., Hubbard, A., Hubbard, B., Brennan, P. V., Nicholls, K. W. & Lok, L. B., 16/10/2018, In: Geophysical Research Letters. 45, 19, p. 10,474-10,481 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Surface modification of aramid fibres by graphene oxide nano-sheets for multiscale polymer composites

    Hussain, S., Yorucu, C., Ahmed, I., Hussain, R., Chen, B., Bilal Khan, M., Siddique, N. A. & Rehman, I. U., 14/11/2014, In: Surface and Coatings Technology. 258, p. 458-466 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    Surface modification of bioceramics by grafting of tailored allyl phosphonic acid

    Phillips, M. J., Duncanson, P., Wilson, K., Darr, J. A., Griffiths, D. V. & Rehman, I., 2005, In: Advances in Applied Ceramics. 104, 5, p. 261-267 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    Surface modification of poly(ethylene terephthalate) polymeric films for flexible electronics applications

    Laskarakis, A., Logothetidis, S., Kassavetis, S. & Papaioannou, E., 15/02/2008, In: Thin Solid Films. 516, 7, p. 1443-1448 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    Surface modification of PTFE by plasma treatment

    Liu, C., Arnell, R. D., Gibbons, A. R., Green, S. M., Ren, L. & Tong, J., 06/2000, In: Surface Engineering. 16, 3, p. 215-217 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Surface performance of a Ni-Ti shape memory alloy

    Green, S., Grant, D. M. & Wood, J. V., 1995, Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California. Pelton, A. R., Hodgson, D. & Duerig, T. W. (eds.). Monterey, Calif.: Published under the aegis of the Organizing Committee of SMST-94, p. 91-96 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  11. Published

    Surface plasmon resonance assisted rapid laser joining of glass

    Zolotovskaya, S. A., Tang, G., Wang, Z. & Abdolvand, A., 25/08/2014, In: Applied Physics Letters. 105, 8, 5 p., 083109.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    Surface temperature equalisation through automated laser vaporisation of thick film electrical heating elements

    Ingham, J., 2019, Lancaster University. 195 p.

    Research output: ThesisMaster's Thesis

  13. Published

    Surface-grafted remedial hydroxyapatite nanoparticles to avoid operational infections

    Zarif, F., Tabassum, S., Jamal, A., Gul, U., Gilani, M. A., Sharif, F., Zahid, S., Asif, A., Chaudhry, A. A. & Rehman, I. U., 1/04/2019, In: Monatshefte fur Chemie. 150, 4, p. 605-615 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    Surface-modified polymeric nanoparticles for drug delivery to cancer cells

    Ahmed, A., Sarwar, S., Hu, Y., Munir, M. U., Nisar, M. F., Ikram, F., Asif, A., Rahman, S. U., Chaudhry, A. A. & Rehman, I. U., 31/01/2021, In: Expert Opinion on Drug Delivery. 18, 1, p. 1-24 24 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    Surveying the Challenges to Improve Linear Accelerator-based Radiation Therapy in Africa: a Unique Collaborative Platform of All 28 African Countries Offering Such Treatment

    Burt, G., 1/12/2021, In: Clinical Oncology. 33, 12, p. E521-E529 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    Suspended water droplet confined laser shock processing at elevated temperatures

    Liu, J., Zhang, X., He, Y., Zhao, Z., Xia, M. & Hu, Y., 31/08/2022, In: International Journal of Machine Tools and Manufacture. 179, 13 p., 103917.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    Swansea Bay tidal lagoon annual energy estimation

    Petley, S. & Aggidis, G., 1/01/2016, In: Ocean Engineering. 111, p. 348-357 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  18. Published

    Swing-up control of inverted pendulum systems.

    Bradshaw, A. & Shao, J., 07/1996, In: Robotica. 14, 4, p. 397-405 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Swirling and impinging effects in an annular nonpremixed jet flame

    Jiang, X., Luo, K. H., de Goey, L. P. H., Bastiaans, R. J. M. & van Oijen, J. A., 01/2011, In: Flow, Turbulence and Combustion. 86, 1, p. 63-88 26 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Switching sensitive driver circuit to combat dynamic delay in on-chip buses

    Weerasekera, R., Zheng, L-R., Pamunuwa, D. B., Tenhunen, H., Paliouras, V. (ed.), Vounckx, J. (ed.) & Verkest, D. (ed.), 09/2005, Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation: 15th International Workshop, PATMOS 2005, Leuven, Belgium, September 21-23, 2005. Proceedings. Paliouras, V., Vounckx, J. & Verkest, D. (eds.). Berlin: Springer, p. 277-285 9 p. (Lecture Notes in Computer Science; vol. 3728).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  21. Published

    SWS improved analysis based on inhomogeneous dielectric loading

    Aloisio, M. & Paoloni, C., 2008, 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 298-299 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  22. Published

    Symmetry in material property relationships: A tool for the discovery of new alloys

    Toda-Caraballo, I., Galindo, E. I. N. & Rivera-Díaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 311-318 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  23. Published

    Synergetic effect of absorber and condenser nano-coating on evaporation and thermal performance of solar distillation unit for clean water production

    Thakur, A. K., Sathyamurthy, R., Velraj, R., Saidur, R., Lynch, I., Chaturvedi, M. & Sharshir, S. W., 15/06/2022, In: Solar Energy Materials and Solar Cells. 240, 19 p., 111698.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Syngas production via dry reforming of methane over Nibased catalysts

    Farooqi, A. S., Al-Swai, B. M., Binti Ruslan, F. H., Mohd Zabidi, N. A., Saidur, R., Faua'Ad Syed Muhammad, S. A. & Abdullah, B., 4/03/2020, Energy Security and Chemical Engineering Congress 17–19 July 2019, Kuala Lumpur, Malaysia. IOP Science, 7 p. 042007. (IOP Conference Series: Materials Science and Engineering; vol. 736).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  25. Published

    Syntheses of azomethine-thiophene monomers for potential application in energy storage devices

    Baharin, S. N. A., Shahabuddin, S., Mazlan, N. A., Sarih, N. M., Saidur, R. & Hashim, N. H., 6/09/2018, Proceedings of the 5th IET International Conference on Clean Energy and Technology (CEAT2018) . IET, 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  26. Published

    Synthesis and characterisation of enhanced barrier polyurethane for encapsulation of implantable medical devices

    Roohpour, N., Wasikiewicz, J. M., Paul, D., Vadgama, P. & Rehman, I. U., 2009, In: Journal of Materials Science: Materials in Medicine. 20, 9, p. 1803-1814 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    Synthesis and characterisation of magnesium substituted calcium phosphate bioceramic nanoparticles made via continuous hydrothermal flow synthesis

    Chaudhry, A. A., Goodall, J., Vickers, M., Cockcroft, J. K., Rehman, I., Knowles, J. C. & Darr, J. A., 2008, In: Journal of Materials Chemistry. 18, 48, p. 5900-5908 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Synthesis and characterization of a novel amphoteric terpolymer nanocomposite for enhanced oil recovery applications

    Mahran, S., Attia, A., Zadeh, Z. & Saha, B., 23/06/2019, ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Stanek, W., Gladysz, P., Werle, S. & Adamczyk, W. (eds.). p. 3681-3692 12 p. (ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  29. Published

    Synthesis and characterization of a novel fast-set proline-derivative-containing glass ionomer cement with enhanced mechanical properties

    Moshaverinia, A., Roohpour, N. & Rehman, I. U., 2009, In: Acta Biomaterialia. 5, 1, p. 498-507 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  30. Published

    Synthesis and characterization of a novel N-vinylcaprolactam-containing acrylic acid terpolymer for applications in glass-ionomer dental cements

    Moshaverinia, A., Roohpour, N., Darr, J. A. & Rehman, I. U., 2009, In: Acta Biomaterialia. 5, 6, p. 2101-2108 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  31. Published

    Synthesis and characterization of alkali-activated loess and its application as protective coating

    Dassekpo, J-BM., Feng, W., Li, Y., Miao, L., Dong, Z. & Ye, J., 3/05/2021, In: Construction and Building Materials. 282, 12 p., 122631.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Synthesis and characterization of calcium deficient apatite granules for drug eluting bone graft applications

    Mir, M., Anwar Siddiqi, S., Hussain, T., Anwar Chaudhry, A., Ur Rehman, I., Khan, A. S. & Abbas, G., 2014, In: Ceramics International. 40, 7 Part B, p. 10719-10725 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  33. Published

    Synthesis and characterization of cellulose/hydroxyapatite based dental restorative composites

    Sabir, M., Ali, A., Siddiqui, U., Muhammad, N., Khan, A. S., Sharif, F., Iqbal, F., Shah, A. T., Rahim, A. & Rehman, I. U., 21/09/2020, In: Journal of Biomaterials Science, Polymer Edition. 31, 14, p. 1806-1819 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    Synthesis and characterization of doped nano-sized ceria-zirconia solid solutions

    Weng, X., Perston, B., Wang, X. Z., Abrahams, I., Lin, T., Yang, S., Evans, J. R. G., Morgan, D. J., Carley, A. F., Bowker, M., Knowles, J. C., Rehman, I. & Darr, J. A., 2009, In: Applied Catalysis B: Environmental. 90, 3-4, p. 405-415 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Published

    Synthesis and characterization of grafted nanohydroxyapatites using functionalized surface agents

    Haque, S., Rehman, I. & Darr, J. A., 2007, In: Langmuir. 23, 12, p. 6671-6676 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  36. Published

    Synthesis and characterization of nano-biomaterials with potential osteological applications

    Phillips, M. J., Darr, J. A., Luklinska, Z. B. & Rehman, I., 2003, In: Journal of Materials Science: Materials in Medicine. 14, 10, p. 875-882 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  37. Published

    Synthesis and characterizations of a fluoride-releasing dental restorative material

    Khan, A. S., Aamer, S., Chaudhry, A. A., Wong, F. S. L. & Rehman, I. U., 2013, In: Materials Science and Engineering: A. 33, 6, p. 3458-3464 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    Synthesis and in-vitro analysis of degradative resistance of a novel bioactive composite

    Khan, A. S., Aziz, M. S., Paul, D., Wong, F. & Rehman, I. U., 2008, In: Journal of Bionanoscience. 2, 2, p. 75-88 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published

    Synthesis and in-vitro cytotoxicity analysis of microwave irradiated nano-apatites

    Nazir, R., Samad Khan, A., Ahmed, A., Ur-Rehman, A., Anwar Chaudhry, A., Ur Rehman, I. & Wong, F. S. L., 2013, In: Ceramics International. 39, 4, p. 4339-4347 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  40. Published

    Synthesis and luminescence enhancement of CaySr4-x-yAl2O7:xEu(2+) phosphors by a novel halide-assisted solid-state reaction method

    He, Q., Fu, R., Zhu, H., He, H., Song, X. & Liu, X., 30/06/2018, In: Journal of Materials Science: Materials in Electronics. 29, 12, p. 10487-10493 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  41. Published

    Synthesis of a proline-modified acrylic acid copolymer in supercritical CO2 for glass-ionomer dental cement applications

    Moshaverinia, A., Roohpour, N., Darr, J. A. & Rehman, I. U., 2009, In: Acta Biomaterialia. 5, 5, p. 1656-1662 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Published

    Synthesis of alpha- and beta-FeOOH iron oxide nanoparticles in non-ionic surfactant medium

    Bashir, S., McCabe, R. W., Boxall, C., Leaver, M. S. & Mobbs, D., 04/2009, In: Journal of Nanoparticle Research. 11, 3, p. 701-706 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  43. Published

    Synthesis of fatty acid methyl esters via direct transesterification with methanol/carbon dioxide mixtures from spent coffee grounds feedstock

    Calixto, F., Fernandes, J., Couto, R., Hernandez, E. J., Najdanovic-Visak, V., Simoes, P. C. & Najdanovic-Visak, V., 2011, In: Green Chemistry. 13, 5, p. 1196-1202 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    Synthesis of green thermo-responsive amphoteric terpolymer functionalized silica nanocomposite derived from waste vegetable oil triglycerides for enhanced oil recovery (EOR)

    Mahran, S., Attia, A. & Saha, B., 20/12/2022, In: Journal of Cleaner Production. 380, 2, 17 p., 135024.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Forthcoming

    Synthesis of hexagonal boron nitride films by dual temperature zone low-pressure chemical vapor deposition

    Zhu, Z., Wang, S., Zou, J., Huang, H., Sun, Z., Xiu, Q., Zhang, Z., Yue, X., Zhang, Y., Qu, J. & Gan, Y., 8/04/2022, (Accepted/In press) In: Chinese Physics B.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    Synthesis of hybrid polymer networks of irradiated chitosan/poly(vinyl alcohol) for biomedical applications

    Islam, A., Yasin, T. & Rehman, I. U., 2014, In: Radiation Physics and Chemistry. 96, p. 115-119 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  47. Published

    Synthesis of N-vinylpyrrolidone modified acrylic acid copolymer in supercritical fluids and its application in dental glass-ionomer cements

    Moshaverinia, A., Roohpour, N., Billington, R. W., Darr, J. A. & Rehman, I. U., 2008, In: Journal of Materials Science: Materials in Medicine. 19, 7, p. 2705-2711 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  48. Published

    Synthesis of piroxicam loaded novel electrospun biodegradable nanocomposite scaffolds for periodontal regeneration

    Farooq, A., Yar, M., Khan, A. S., Shahzadi, L., Siddiqi, S. A., Mahmood, N., Rauf, A., Qureshi, Z-U-A., Manzoor, F., Chaudhry, A. A. & Ur Rehman, I., 1/11/2015, In: Materials Science and Engineering: A. 56, p. 104-113 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  49. Published

    Synthesis of poly(sebacic anhydride)-indomethacin controlled release composites via supercritical carbon dioxide assisted impregnation

    Gong, K., Rehman, I. U. & Darr, J. A., 29/06/2007, In: International Journal of Pharmaceutics. 338, 1-2, p. 191-197 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    Synthesis of the fields of barrel open resonators

    Carter, R., 21/11/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 657, 1, p. 1-5 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    System architectures and safety for mobile construction robots.

    Seward, D. W. & Quayle, S., 1996, Proceedings of the 13th international symposium on robotics in construction. Tokyo, Japan: Japan Robot Association (JARA), p. 727-732 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  52. Published

    System identification of metabotropic glutamate receptor dependent long–term depression

    Tambuyzer, T., Ahmed, T., Berckmans, D., Taylor, C. J., Balschun, D. & Aerts, J-M., 2013, In: Neural Computation. 25, 3, p. 650-670 21 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  53. Published

    System identification, time series analysis and forecasting: The Captain Toolbox handbook.

    Pedregal, D. J., Taylor, C. J. & Young, P. C., 2007, Lancaster: Lancaster University. 273 p.

    Research output: Book/Report/ProceedingsOther report

  54. Published

    System in Package Technology - Design for Manufacture Challenges.

    Richardson, A. M. D., Bailey, C., Dumas, N. & Yannou, J. M., 1/02/2007, In: Circuit World. 33, 1, p. 36-46 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  55. Published

    System study using injection phase locked magnetron as an alternative source for superconducting radio frequency accelerator

    Wang, H., Plawski, T., Rimmer, R., Dexter, A., Tahir, I., Neubauer, M. & Dudas, A., 1/01/2014, IEEE International Vacuum Electronics Conference, IVEC 2014. IEEE Computer Society Press, p. 443-444 2 p. 6857680. (IEEE International Vacuum Electronics Conference, IVEC 2014).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  56. Published

    Systematic multivariate optimisation of butylene carbonate synthesis via CO <inf>2</inf> utilisation using graphene-inorganic nanocomposite catalysts

    Onyenkeadi, V., Aboelazayem, O. & Saha, B., 15/04/2020, In: Catalysis Today. 346, p. 10-22 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  57. Published

    Systematic multivariate optimization of biodiesel synthesis from high acid value waste cooking oil: A response surface methodology approach

    Aboelazayem, O., Gadalla, M. & Saha, B., 15/10/2018, Systematic multivariate optimization of biodiesel synthesis from high acid value waste cooking oil: A response surface methodology approach.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  58. Published

    Systematic Review and Annotated Bibliography on Teaching in Higher Education Academies (HEAs) via Group Learning to Adapt with COVID-19

    Amaechi, C. V., Amaechi, E. C., Onumonu, U. P. & Kgosiemang, I. M., 12/10/2022, In: Education Sciences. 12, 10, 44 p., 699.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    Tailoring dynamic recrystallization in Ni- and Fe-base high temperature alloys

    Rivera-Diaz-del-Castillo, P. & Galindo-Nava, E., 2013, Recrystallization and Grain Growth V. Vol. 753. p. 427-430 4 p. (Materials Science Forum; vol. 753).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  60. Published

    Tailoring interfacial properties of 3D-printed continuous natural fiber reinforced polypropylene composites through parameter optimization using machine learning methods

    Cai, R., Wen, W., Wang, K., Peng, Y., Ahzi, S. & Chinesta, F., 31/08/2022, In: MATERIALS TODAY COMMUNICATIONS. 32, 11 p., 103985.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  61. Published

    Tailoring of activated carbon with ammonia for enhanced anaesthetic sevoflurane adsorption

    Nam Ang, T., Young, B. R., Taylor, M., Burrell, R., Kheireddine Aroua, M. & Baroutian, S., 15/11/2020, In: Separation and Purification Technology. 251, 12 p., 117404.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  62. Published

    Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz Del Castillo, P. E. J., Reischig, P. & Van Der Zwaag, S., 04/2005, In: Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  63. Published

    Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials

    Hou, X., Hu, H. & Silberschmidt, V., 2014, In: Journal of Applied Physics. 115, 8 p., 224903.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  64. Published

    Tailoring the Local Design of Deep Water Composite Risers to Minimise Structural Weight

    Amaechi, C. V., Gillet, N., Ja’e, I. A. & Wang, C., 26/03/2022, In: Journal of Composites Science. 6, 4, 33 p., e103.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  65. Published

    Tailoring the pressure-drop in multi-layered open-cell porous inconel structures

    Oun, H. & Kennedy, A. R., 12/2015, In: Journal of Porous Materials. 22, 6, p. 1627-1633 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  66. Published

    Take the car and save the planet? The environmental impact of rail transport.

    Kemp, R., 10/2004, In: Power Engineer. 18, 5, p. 12-17 6 p.

    Research output: Contribution to Journal/MagazineJournal article

  67. Published

    Tapered metallic photonic crystal slow wave structure for THz vacuum electron devices

    Letizia, R., Mineo, M. & Paoloni, C., 2013, Millimeter Waves and THz Technology Workshop (UCMMT), 2013 6th UK, Europe, China. Piscataway, N.J.: IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  68. Published

    Teaching embedded programming through mobile games development in Symbian.

    Edwards, R. & Coulton, P., 10/2007, In: International Journal of Electrical Engineering Education. 44, 4, p. 307-318 12 p.

    Research output: Contribution to Journal/MagazineJournal article

  69. Published

    Teaching safety – issues of course design and delivery.

    Seward, D. W. & Joyce, M. J., 2001, Proceedings of a safety critical systems symposia.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  70. Published

    Team-based Learning: A Novel Approach to Teaching Engineering Subjects

    Najdanovic, V., 2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  71. Published

    Team-based Learning: A Novel Approach to Teaching Engineering Subjects

    Najdanovic, V., 2017.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  72. Published

    Team-based learning for first year engineering students

    Najdanovic, V., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  73. Published

    Team-based learning for first year engineering students

    Najdanovic, V., 01/2017, In: Education for Chemical Engineers. 18, p. 26-34 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  74. Published

    Tearing failure of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  75. Published

    Tearing failure of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  76. Published

    Techniques for automatic on chip closed loop transfer function monitoring for embedded charge pump phase locked loops.

    Burbidge, M. J., Tijou, J. & Richardson, A. M. D., 19/12/2003, Design, Automation and Test in Europe Conference and Exhibition, 2003. p. 496-501 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  77. Published

    Techno-economics and Sensitivity Analysis of Microalgae as Commercial Feedstock for Bioethanol Production

    Hossain, N., Mahlia, T. M. I., Zaini, J. & Saidur, R., 1/09/2019, In: Environmental Progress and Sustainable Energy. 38, 5, 14 p., 13157.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  78. Unpublished

    Technological Developments on Small Hydro.(Presentation)

    Aggidis, G. A., 05/2001, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  79. Published

    Technological Progress Improves Plans for Sustainable Small-Scale Hydropower Generation

    Luchinskaya, E., Aggidis, G. & Howard, D. C., 2010, Reliable hydropower for a safe and sustainable power production: 16th International Seminar on Hydropower Plants. Vienna: Institute for Energy Systems and Thermodynamics, p. 795-804 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Published

    Technological progress improves plans to maximise hydro potential.

    Aggidis, G. A., Luchinskaya, E. & Howard, D. C., 10/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  81. Published

    Technology for D-band/G-band Ultra Capacity Layer

    Paoloni, C., Boppel, S., Krozer, V., Quang, T. L., Letizia, R., Limiti, E., Magne, F., Marilier, M., Ramirez, A., Vidal, B. & Zimmerman, R., 15/08/2019, 2019 European Conference on Networks and Communications (EuCNC). IEEE, p. 209-213 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  82. Published

    Technology of Dispersed Systems and Materials: Physicochemical Dynamics of Structure Formation and Rheology (Uriev)

    Cheneler, D., 16/05/2017, In: Applied Rheology. 27, 2, p. 10-10 1 p.

    Research output: Contribution to Journal/MagazineBook/Film/Article review

  83. Published

    Technology, Assembly, and Test of a W-Band Traveling Wave Tube for New 5G High-Capacity Networks

    Andre, F., Racamier, J-C., Zimmerman, R., Quang, T. L., Krozer, V., Ulisse, G., Minenna, D. F. G., Letizia, R. & Paoloni, C., 29/05/2020, In: IEEE Transactions on Electron Devices. 67, 7, p. 2919 - 2924 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Published

    TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development

    Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă, M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  85. Published

    Temperature and structure dependency of solid–liquid interfacial energy

    Mondal, K., Kumar, A., Gupta, G. & Murty, B. S., 1/06/2009, In: Acta Materialia. 57, 11, p. 3422-3430 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Published

    Templates for consumer use in designing customised products

    Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  87. Published

    Tensile behavior of low density thermally bonded nonwoven material

    Hou, X., Acar, M. & Silberschmidt, V. V., 20/04/2009, In: Journal of Engineered Fibers and Fabrics. 4, 1, p. 26-33 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  88. Published

    Tensile behaviour of low density thermally bonded nonwoven material

    Hou, X., Acar, M. & Silberschmidt, V., 2009, In: Journal of Engineered Fibres and Fabrics . 4, 1, p. 26-33 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  89. E-pub ahead of print

    Tensile strength and wear resistance of glass-reinforced PA1212 fabricated by selective laser sintering

    Wu, T., Ren, Y., Liang, L., Wen, J., Wu, H., Tian, Y., Tey, W. S. & Zhou, K., 31/12/2023, In: Virtual and Physical Prototyping. 18, 1

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published

    Tension/compression strength of unnotched/notched pultruded GRP plate.

    Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  91. Published

    Terahertz aperture SNOM mapping of metamaterial coupled resonators

    Almond, N. W., Hermans, R., Hale, L. L., Kindness, S. J., Michailow, W., Wei, B., Romain, X., Ye, S., Young, R., Degl'Innocenti, R., Beere, H. E., Ritchie, D. A., Mitrofanov, O., N., E., M.A., N. (ed.), N.I., Z. (ed.) & (SPIE), T. S. O. P-O. I. E., 20/08/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  92. Published

    Terahertz confocal microscopy with a quantum cascade laser source

    De Cumis, U. S., Xu, J. H., Masini, L., Degl'Innocenti, R., Pingue, P., Beltram, F., Tredicucci, A., Vitiello, M. S., Benedetti, P. A., Beere, H. E. & Ritchie, D. A., 24/09/2012, In: Optics Express. 20, 20, p. 21924-21931 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  93. Published

    Terahertz confocal microscopy with a quantum cascade laser source

    De Cumis, R. U. S., Xu, J. H., Masini, L., Degl'Innocenti, R., Pingue, P., Benedetti, P. A., Tredicucci, A. & Vitiello, M. S., 2012, IRMMW-THz 2012 - 37th International Conference on Infrared, Millimeter, and Terahertz Waves. 6380355

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  94. Published

    Terahertz Front End Technology and Deployment for Ultra-High Capacity Links

    Magne, F., Le, T., Llorente, R., Paoloni, C. & Ramirez, A., 11/08/2021, Next Generation Wireless Terahertz Communication Networks. Ghafoor, S., Husain Rehmani, M. & Davy, A. (eds.). London: CRC Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  95. Published

    Terahertz Metamaterial Optoelectronic Modulators with GHz Reconfiguration Speed

    Zaman, A. M., Lu, Y., Romain, X., Almond, N. W., Burton, O. J., Alexander-Webber, J., Hofmann, S., Mitchell, T., Griffiths, J. D. P., Beere, H. E., Ritchie, D. A. & DeglInnocenti, R., 30/09/2022, In: IEEE Transactions on Terahertz Science and Technology. 12, 5, p. 520-526 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Terahertz Nanoscopy of Plasmonic Resonances with a Quantum Cascade Laser

    Degl'Innocenti, R., Wallis, R., Wei, B., Xiao, L., Kindness, S. J., Mitrofanov, O., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E. & Ritchie, D. A., 20/09/2017, In: ACS Photonics. 4, 9, p. 2150-2157 8 p.

    Research output: Contribution to Journal/MagazineLetterpeer-review

  97. Published

    Terahertz optical modulator based on metamaterial splitring resonators and graphene

    Degl'Innocenti, R., Jessop, D. S., Shah, Y. D., Sibik, J., Zeitler, A., Kidambi, P. R., Hofmann, S., Beere, H. E. & Ritchie, D. A., 2014, 2014 Conference on Lasers and Electro-Optics, CLEO 2014. Institute of Electrical and Electronics Engineers Inc., Vol. 2014-January. 2 p. 6989935

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  98. Published

    Terahertz optical modulator based on metamaterial split-ring resonators and graphene

    Degl'Innocenti, R., Jessop, D. S., Shah, Y. D., Sibik, J., Zeitler, J. A., Kidambi, P. R., Hofmann, S., Beere, H. E. & Ritchie, D. A., 28/05/2014, In: Optical Engineering. 53, 5, 057108.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  99. Published

    Terahertz polarisation modulator by electronic control of graphene loaded chiral metamaterial device

    Almond, N. W., Kindness, S. J., Michailow, W., Wei, B., Jakob, L., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. A. & Degl'Innocenti, R., 23/06/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  100. Published

    Terahertz polarisation modulator by electronic control of graphene loaded chiral metamaterial device

    Almond, N. W., Kindness, S. J., Michailow, W., Wei, B., Jakob, L., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. A. & Degl'Innocenti, R., 1/01/2019, European Quantum Electronics Conference, EQEC_2019. OSA - The Optical Society, Vol. 2019. 2019-eh_3_4. (Optics InfoBase Conference Papers; vol. Part F143-EQEC 2019).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

Back to top