Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    Codec of combined coding and modulation scheme

    Markarian, G., Manoukian, H., Honary, B. & G. Markarian, H. Manoukian, and B. Honary (Patent applicant), 1993, Patent No. 1830623

    Research output: Patent

  2. Published

    Coded-aperture imaging systems: past, present and future development - a review

    Cieslak, M., Akurugoda Gamage, K. A. & Glover, R., 09/2016, In: Radiation Measurements. 92, p. 59-71 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  3. Published

    Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering

    Liu, C., Fairhurst, R. G., Ren, L. Q., Green, S. M., Tong, J. & Arnell, R. D., 15/01/2002, In: Surface and Coatings Technology. 149, 2-3, p. 143-150 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  4. Published

    Coding for Both Protection and Synchronisation

    Coulton, P., Hannaford, C. & Honary, B., 1997, Communications coding and signal processing: third volume on communication theory and applications. Honary, B., Darnell, M. & Farrell, P. (eds.). Taunton: Research Studies Press Ltd., p. 133-147 15 p. (Electronic & electrical engineering research studies. Communications systems, techniques, and applications series; vol. 2).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Published

    Coefficients for Theory of Adaptive Elasticity and its use in the FEA of remodeling processes in biological tissues

    Magatin, R., Ye, J. & Jin, Z., 2009, 3rd International Conference on Mechanics of Biomaterials and Tissues.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  6. Published

    Coexistence of collective oblate and superdeformed prolate shapes in 196Pb

    Dagnall, P. J., Beausang, C. W., Fallon, P., Forsyth, P. D., Paul, E. S., Sharpey-Schafer, J. F., Twin, P. J., Ali, I., Cullen, D. M., Joyce, M. J., Smith, G., Wadsworth, R., Clark, R. M., Regan, P. H., Astier, A., Meyer, M. & Redon, N., 1993, In: Journal of Physics G: Nuclear and Particle Physics. 19, 3, p. 465-470 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    Cofactor NAD(P)H regeneration: how selective are the reactions?

    Burnett, J. W. H., Howe, R. F. & Wang, X., 1/06/2020, In: Trends in Chemistry. 2, 6, p. 488-492 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  8. Published

    Cofactor NAD(P)H regeneration inspired by heterogeneous pathways

    Wang, X., Saba, T., Yiu, H. H. P., Howe, R. F., Anderson, J. A. & Shi, J., 11/05/2017, In: Chem. 2, 5, p. 621-654 34 p.

    Research output: Contribution to journalJournal articlepeer-review

  9. Published

    Coherent control of plasmonic nanoantennas using optical eigenmodes

    Kosmeier, S., De Luca, A. C., Zolotovskaya, S., Di Falco, A., Dholakia, K. & Mazilu, M., 2013, In: Scientific Reports. 3, 7 p., 1808.

    Research output: Contribution to journalJournal articlepeer-review

  10. Published

    Coil-system design for production of uniform magnetic-fields.

    Carter, R. G., 1976, In: Proceedings of the Institution of Electrical Engineers (London). 123, 11, p. 1279-1283 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  11. Published

    Coincident wire and powder deposition by laser to form compositionally graded material

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  12. Published

    Cold sprayed metal-ceramic coatings using satellited powders

    Al-Hamdani, K. S., Murray, J. W., Hussain, T., Kennedy, A. & Clare, A. T., 1/07/2017, In: Materials Letters. 198, p. 184-187 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    Cold-test analysis of H-plane and E-plane loaded rectangular slow-ware structure

    Billa, L. R., Li, X., Huang, X., Paoloni, C., Muhammad, N. A. & Chen, X., 11/09/2017, 2017 10th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  14. Published

    Collaborative coding multiple access employing Manchester and CMI codes.

    Markarian, G. S., Honary, B. & Ali, F., 1992, 4th Bangor communications symposium. Bangor: University of Wales, p. 120-123 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  15. Published

    Collective dipole rotational bands in197Pb

    Clark, R. M., Wadsworth, R., Paul, E. S., Beausang, C. W., Ali, I., Astier, A., Cullen, D. M., Dagnall, P. J., Fallon, P., Joyce, M. J., Meyer, M., Redon, N., Regan, P. H., Sharpey-Schafer, J. F., Nazarewicz, W. & Wyss, R., 1992, In: Zeitschrift für Physik A Hadrons and Nuclei. 342, 3, p. 371-372 2 p.

    Research output: Contribution to journalJournal articlepeer-review

  16. Published

    Collective oblate dipole rotational bands in 198Pb

    Clark, R. M., Wadsworth, R., Paul, E. S., Beausang, C. W., Ali, I., Astier, A., Cullen, D. M., Dagnall, P. J., Fallon, P., Joyce, M. J., Meyer, M., Redon, N., Regan, P. H., Sharpey-Schafer, J. F., Nazarewicz, W. & Wyss, R., 1993, In: Nuclear Physics, Section A. 562, 1, p. 121-156 36 p.

    Research output: Contribution to journalJournal articlepeer-review

  17. Published

    Colloidal Suspension Rheology (J. Mewis, N. J. Wagner)

    Cheneler, D., 2012, In: Applied Rheology. 22, p. 12-13 2 p.

    Research output: Contribution to journalBook/Film/Article reviewpeer-review

  18. Published

    Combating digital noise in high speed ULSI circuits using binary BCH encoding.

    Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 2000, The 2000 IEEE International Symposium on Circuits and Systems, 2000. Proceedings. ISCAS 2000 Geneva.. Geneva: IEEE, Vol. 4. p. 13-16 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  19. Published

    Combination of searches for Higgs boson pairs in pp collisions at s=13TeV with the ATLAS detector

    Collaboration, ATLAS., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Sanderswood, I., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M., Whitmore, B. W. & Yexley, M., 26/11/2019, In: Physics Letters B. 800, 40 p., 150.

    Research output: Contribution to journalJournal articlepeer-review

  20. Published

    Combination of Searches for Invisible Higgs Boson Decays with the ATLAS Experiment

    Collaboration, ATLAS., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M. & Whitmore, B. W., 13/06/2019, In: Physical review letters. 122, 23, 20 p., 231801.

    Research output: Contribution to journalJournal articlepeer-review

  21. Published
  22. Published
  23. Published

    Combinatorial optimization of carbide-free bainitic nanostructures

    Huang, H., Sherif, M. Y. & Rivera-Díaz-Del-Castillo, P. E. J., 03/2013, In: Acta Materialia. 61, 5, p. 1639-1647 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  24. Published

    Combined digital imaging of mixed-field radioactivity with a single detector.

    Gamage, K., Joyce, M. J. & Adams, J., 11/04/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 635, 1, p. 74-77 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  25. Published

    Combined fast neutron - gamma ray computed tomography and radiography

    Licata, M. & Joyce, M., 2020, Lancaster University. 196 p.

    Research output: ThesisDoctoral Thesis

  26. Published

    Combined finite strip and beam elements for double tee slabs

    Abou Ghadeer, M., Ye, J. & Mansouri, A. H., 2003, Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing: Egmond-aan-Zee, the Netherlands, 2-4 September 2003 . Topping, B. H. V. (ed.). Stirling: Civil-Comp press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  27. Published
  28. Published

    Combined pole assignment and mean value engine model multivariable decoupling control

    Titi, S. & Taylor, C. J., 2015, In: Transactions of the Institute of Measurement and Control. 37, 1, p. 40-49 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  29. Published

    Combined solar electrocoagulation and adsorption processes for Pb(II) removal from aqueous solution

    Hussin, F., Aroua, M. K. & Szlachtac, M., 30/09/2019, In: Chemical Engineering and Processing: Process Intensification. 143, 12 p., 107619.

    Research output: Contribution to journalJournal articlepeer-review

  30. Published

    Combined vibration and thermal analysis for the condition monitoring of rotating machinery

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 05/2014, In: Structural Health Monitoring. 13, 3, p. 281-295 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  31. Published

    Combined wire and powder feeding laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  32. Published

    Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 30/04/2006, In: Applied Surface Science. 252, 13, p. 4803-4808 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  33. Published

    Combustion characteristics of H2/N2 and H2/CO syngas nonpremixed flames

    Ranga Dinesh, K. K. J., Jiang, X., Kirkpatrick, M. P. & Malalasekera, W., 11/2012, In: International Journal of Hydrogen Energy. 37, 21, p. 16186-16200 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  34. Published

    Combustion-induced buoyancy effects of an axisymmetric reactive plume

    Jiang, X. & Luo, K. H., 2000, In: Symposium International on Combustion. 28, 2, p. 1989-1995 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  35. Published

    Comments by the Senior Editor

    Betta, G-FD., Obryk, B., Pia, M. G., Britton, C., Cao, L. R., Dong, Z., Dreyer, J., Girard, S., Jansson, P., Joyce, M., Kouzes, R. & Lyoussi, A., 16/04/2020, In: IEEE Transactions on Nuclear Science. 67, 4, p. 543-543 1 p.

    Research output: Contribution to journalEditorialpeer-review

  36. Published

    Commissioning of the electron injector for the AWAKE experiment

    Kim, S-Y., Doebert, S., Apsimon, O., Apsimon, R., Burt, G., Dayyani, M., Gessner, S., Gorgisyan, I., Granados, E., Mazzoni, S., Moody, J. T., Turner, M., Williamson, B. & Chung, M., 11/02/2020, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 953, 7 p., 163194.

    Research output: Contribution to journalJournal articlepeer-review

  37. Published

    Communication technologies for smart grid ubiquitous sensor network system

    Tsado, Y., Gamage, K. & Lund, D., 2013, Power Engineering, Energy and Electrical Drives (POWERENG), 2013 Fourth International Conference on. Piscataway, N.J.: IEEE, p. 1706-1712 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  38. Published

    Communication—formation of a superconducting MgB2-containing coating on niobium by plasma electrolytic oxidation

    Aliasghari, S., Skeldon, P., Zhou, X., Valizadeh, R., Junginger, T., Stenning, G. B. G. & Burt, G., 16/03/2019, In: ECS Journal of Solid State Science and Technology. 8, 3, p. N39-N41 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  39. Published

    Community-University Research: A Warts and All Account

    Whittle, J., Ferrario, M. A. & Simm, W., 1/01/2020, Into the Wild: Beyond the Design Research Lab. Chamberlain, A. & Crabtree, A. (eds.). Springer International Publishing, p. 115-147 33 p. (Studies in Applied Philosophy, Epistemology and Rational Ethics ; vol. 48).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  40. Published

    Compact backward wave oscillators for THz imaging systems

    Paoloni, C., Yue, L., Tang, X., Zhang, F., Popovic, B., Himes, L., Barchfeld, R., Gamzina, D., Letizia, R., Mineo, M. & Luhmann Jr., N. C., 12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  41. Published

    Compact modelling of through-silicon vias (TSVs) in three-dimensional (3-D) integrated circuits.

    Weerasekera, R., Grange, M., Pamunuwa, D. B., Tenhunen, H. & Zheng, L-R., 10/2009, Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. San Francisco: IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  42. Published

    Compact viscometer prototype for remote in-situ analysis of sludge

    Fried, T., Cheneler, D., Monk, S. D., Taylor, C. J. & Dodds, J., 26/07/2019, In: Sensors. 19, 15, 14 p., 3299.

    Research output: Contribution to journalJournal articlepeer-review

  43. Published

    Comparable performance characteristics from different test sites.

    McCabe, A. P., Aggidis, G. A. & Stallard, T. J., 2006, Proceedings of the 4th EC co-ordination action on ocean energy workshop - performance monitoring of ocean energy systems (INETI)..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  44. Published

    Comparative analysis of bone cement fracture surfaces

    Green, S., Liu, C., Watkins, N. D. & McCaskie, A. W., 2000, 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK.. Cambridge : IOM communications, p. 325-328 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  45. Published

    Comparative analysis of pulse shape discrimination methods in a 6Li loaded plastic scintillator

    Balmer, M., Gamage, K. & Taylor, G. C., 11/07/2015, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 788, p. 146-153 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  46. Published

    Comparative assessment of the harmonic balance Navier Stokes technology for horizontal and vertical axis wind turbine aerodynamics

    Campobasso, M. S., Drofelnik, J. & Gigante, F., 10/09/2016, In: Computers and Fluids. 136, p. 354-370 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials

    Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    Comparative life cycle assessment of NAD(P)H regeneration technologies

    Burnett, J., Sun, Z., Li, J., Wang, X. & Wang, X., 21/09/2021, In: Green Chemistry. 23, 18, p. 7162-7169 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    Comparative net energy analysis of renewable electricity and carbon capture and storage

    Sgouridis, S., Carbajales-Dale, M., Csala, D., Chiesa, M. & Bardi, U., 8/04/2019, In: Nature Energy. 4, p. 456–465 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  50. Published

    Comparative simulation study of ZnTe heating effects in focused THz radiation generation

    Lin, H., Fischer, B. M. & Abbott, D., 2010, Infrared Millimeter and Terahertz Waves (IRMMW-THz), 2010 35th International Conference on. IEEE, 2 p. 5612720

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  51. Published

    Comparative turbulent three-dimensional Navier-Stokes hydrodynamic analysis and performance assessment of oscillating wings for renewable energy applications

    Drofelnik, J. & Campobasso, M. S., 12/2016, In: International Journal of Marine Energy. 16, p. 100-115 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  52. Published

    Comparing Carbon Footprint Methodologies for SMEs

    Moss, J., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  53. Published

    Comparing empirical models for sediment and phosphorus transfer from soils to water at field and catchment scale under data uncertainty

    Krueger, T., Quinton, J. N., Freer, J., Macleod, C. J. A., Bilotta, G. S., Brazier, R. E., Hawkins, J. M. B. & Haygarth, P. M., 04/2012, In: European Journal of Soil Science. 63, 2, p. 211-223 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  54. Published

    COMPARISON BETWEEN MMIC MATRIX AND DISTRIBUTED-AMPLIFIERS

    DAGOSTINO, S. & PAOLONI, C., 02/1995, In: IEE Proceedings - Microwaves, Antennas, and Propagation. 142, 1, p. 75-77 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  55. Published

    Comparison between silicon and single-crystal diamond photodiodes for localized pulsed fast neutron detection

    Verona, C., Verona-Rinati, G., Platt, S., Schooneveld, E. M. & Pietropaolo, A., 15/05/2018, In: EPL. 121, 6, 5 p., 68002.

    Research output: Contribution to journalJournal articlepeer-review

  56. Published

    Comparison between three GaAs monolithic transimpedance amplifiers for optical communication systems

    Casao, J. A., Dorta, P., Caceres, J. L., Salazar-Palma, M., Perez, J., Orengo, G., Paoloni, C. & Giannini, F., 1/12/1992, 1992 22nd European Microwave Conference. IEEE, p. 330-335 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  57. Published

    Comparison of catalytic activity of ZIF-8 and Zr/ZIF-8 for greener synthesis of chloromethyl ethylene carbonate by CO2 utilization

    Olaniyan, B. & Saha, B., 21/01/2020, In: Energies. 13, 3, 25 p., 521.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    Comparison of CdZnTe neutron detector models using MCNP6 and Geant4

    Wilson, E., Anderson, M., Prendergasty, D. & Cheneler, D., 10/01/2018, In: EPJ Web of Conferences. 170, 5 p., 08008.

    Research output: Contribution to journalConference articlepeer-review

  59. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to journalJournal articlepeer-review

  60. Published

    Comparison of classical and modern control applied to an excavator-arm.

    Dixon, R., Taylor, C. J. & Shaban, E. M., 2005, International Federation of Automatic Control 16th Triennial World Congress.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  61. Published

    Comparison of couplers for 0.346 THz DCW-BWO

    Waring, R., Paoloni, C., Gamzina, D., Popovic, B., Himes, L., Letizia, R., Tang, Y., Li, H., Pan, P., Feng, J. & Luhmann, N. C., 7/03/2017, Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016. Yu, J. & Chen, X. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 208-209 2 p. 7874013. (Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  62. Published

    Comparison of deterministic and stochastic methods for robust Identification of a lightly damped flexible beam

    Montazeri, A., Esmaeilsabzali, H. & Poshtan, J., 2006, 13th International Congress on Sound and Vibration 2006, ICSV 2006. p. 2764-2773 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  63. Published

    Comparison of different approaches for robust identification of a lightly damped flexible beam

    Montazeri, A., Esmaeilsabzali, H., Poshtan, J. & Jahed Motlagh, M. R., 4/09/2006, 2006 14th European Signal Processing Conference. IEEE, p. 1-5 5 p. (European Signal Processing Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  64. Published

    Comparison of different synthesis schemes for production of sodium methoxide from methanol and sodium hydroxide

    Aeamsuksai, N., Mueansichai, T., Charoensuppanimit, P., Kim-Lohsoontorn, P., Aiouache, F. & Assabumrungrat, S., 30/11/2020, In: Engineering Journal . 24, 6, p. 63-77 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  65. Published

    Comparison of equivalent circuit model and mafia calculation for re-entrant and co-axial cavities.

    Feng, J. J., Carter, R. G., Feng, Z. (ed.) & Chen, WH. (ed.), 2004, p. 354-357. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  66. E-pub ahead of print

    Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies: a Finite Element Analysis

    Levent, A., Yapti, M., Celik, H. K., Kose, O., Kılıçaslan, Ö. F. & Rennie, A., 23/07/2021, (E-pub ahead of print) In: The Journal of Foot and Ankle Surgery. YJFAS 53575.

    Research output: Contribution to journalJournal articlepeer-review

  67. Published

    Comparison of Fragmentation Functions for Jets Dominated by Light Quarks and Gluons from $pp$ and $\mathrm{Pb}+\mathrm{Pb}$ Collisions in ATLAS

    Collaboration, ATLAS., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M. & Whitmore, B. W., 22/07/2019, In: Physical review letters. 123, 4, 21 p., 042001.

    Research output: Contribution to journalJournal articlepeer-review

  68. Published

    Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering

    King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  69. Published

    Comparison of methods to determine auroral ionospheric conductances using ground-based optical and riometer data

    Senior, A., Kosch, M. J. & Honary, F., 2008, In: Annales Geophysicae. 26, 12, p. 3831-3840 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  70. Published

    Comparison of Neutron Detection Performance of Four Thin-Film Semiconductor Neutron Detectors Based on Geant4

    Zhang, Z. & Aspinall, M., 27/11/2021, In: Sensors. 21, 15 p., 7930.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    Comparison of PI and PDF controls of a manipulator arm.

    Nagy, Z. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 739-744 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  72. Published

    Comparison of power capture in irregular waves and their regular wave components.

    Meadowcroft, J. A. C., Stallard, T. J. & Baker, N. J., 2005, Proceedings of the 6th European wave and tidal energy conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  73. Published

    Comparison of Pulse Shape Discrimination Characteristics in Three Organic Scintillators for a High Resolution Coded-Aperture Neutron Imager

    Akurugoda Gamage, K. A. & Cieslak, M., 24/10/2016, 2016 European Nuclear Conference (ENC-2016). European Nuclear Society, p. 306-309 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  74. Published

    Comparison of stretched-wire, bead-pull and numerical impedance calculations on 3.9 GHz dipole cavities

    Goudket, P., Beard, C., McIntosh, P., Burt, G., Dexter, A. & Jones, R. M., 1/01/2008, p. 859-861. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  75. Published

    Comparison of the characteristic energy of precipitating electrons derived from ground-based and DMSP satellite data

    Ashrafi, M., Kosch, M. J. & Honary, F., 01/2005, In: Annales Geophysicae. 23, 1, p. 135-145 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  76. Published

    Comparison of THz backward wave oscillators based on corrugated waveguides.

    Mineo, M. & Paoloni, C., 2012, In: Progress In Electromagnetics Research Letters. 30, p. 163-171 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  77. Published

    Complex electronic implants and polymer packaging needs

    Schoenleber, M., Vaghela, J., Ismail, F., Grahn, M., Popa, C., Rehman, I., Vadgama, P., T.S., S. (ed.) & S.I., K. (ed.), 2007, p. 703-706. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  78. Published

    Complex Envelope Alternating Direction Implicit Finite Difference Time Domain Analysis Of Ultra-Fast Photonic Bandgap Switches

    Selim, R., Pinto, D. & Obayya, S., 2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  79. Published

    Complex envelope alternating direction implicit finite difference time domain method for photonic bandgap structures

    Pinto, D. & Obayya, S., 2006. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  80. Published

    Component repair using laser direct metal deposition

    Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, KC. (eds.). London: Springer Verlag, p. 345-350 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  81. Published

    Component repair using laser direct metal deposition

    Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  82. Published

    Components for the testing of a co-harmonic gyrotron cavity

    Constable, D. A., Ronald, K., He, W., Fampris, X. S., Phelps, A. D. R. & Cross, A. W., 15/07/2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  83. Published

    Composite Behaviour of Headed Stud Shear Connectors in Pairs with Profiled Metal Deck Flooring

    Lam, D., Ye, J. & Qureshi, J., 2010, 4th International Conference on Steel & Composite Structures.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  84. Published

    Composite Risers – an offshore deepwater solution

    Amaechi, C. V. & Ye, J., 7/05/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  85. Published

    Composite risers for deep waters using a numerical modelling approach

    Amaechi, C. V., Gillett, N., Odijie, A. C., Hou, X. & Ye, J., 15/02/2019, In: Composite Structures. 210, p. 486-499 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  86. Published

    Composition and process parameter dependence of yield strength in laser powder bed fusion alloys

    Eskandari Sabzi, H. & Rivera-Díaz-del-Castillo, P. E. J., 1/10/2020, In: Materials and Design. 195, 11 p., 109024.

    Research output: Contribution to journalJournal articlepeer-review

  87. Published

    Composition-structure-property effects of antimony in soda-lime-silica glasses

    Chen, T-Y., Rautiyal, P., Vaishnav, S., Gupta, G., Schlegl, H., Dawson, R. J., Evans, A. W., Kamali, S., Johnson, J. A., Johnson, C. E. & Bingham, P. A., 15/09/2020, In: Journal of Non-Crystalline Solids. 544, 16 p., 120184.

    Research output: Contribution to journalJournal articlepeer-review

  88. Published

    Comprehensive modeling of THz microscope with a sub-wavelength source

    Lin, H., Fumeaux, C., Ung, B. S. Y. & Abbott, D., 2011, In: Optics Express. 19, 6, p. 5327-5338 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  89. Published

    Comprehensive study on nanofluid and ionanofluid for heat transfer enhancement: A review on current and future perspective

    Bakthavatchalam, B., Habib, K., Saidur, R., Saha, B. B. & Irshad, K., 1/05/2020, In: Journal of Molecular Liquids. 305, 33 p., 112787.

    Research output: Contribution to journalReview articlepeer-review

  90. Published

    Compressible Navier-Stokes analysis of an oscillating wing in a power-extraction regime using efficient low-speed preconditioning

    Campobasso, S. & Drofelnik, J., 30/08/2012, In: Computers and Fluids. 67, p. 26-40 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  91. Published

    Compressible Navier-Stokes Analysis of Floating Wind Turbine Rotor Aerodynamics

    Campobasso, M. S., Sanvito, A. G., Drofelnik, J., Jackson, A., Zhou, Y., Xiao, Q. & Croce, A., 4/11/2018, ASME 2018 1st International Offshore Wind Technical Conference: 4-7 November 2018, San Francisco, California, USA. The American Society of Mechanical Engineers, 12 p. IOWTC2018-1059

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  92. Published

    Compressible Reynolds-Averaged Navier-Stokes analysis of wind turbine turbulent flows using a Fully-Coupled Low-Speed preconditioned multigrid solver

    Campobasso, S., Yan, M., Drofelnik, J., Piskopakis, A. & Caboni, M., 2014, ASME Turbo Expo 2014: turbine technical conference and exposition: oil and gas applications; organic rankine cycle power systems; supercritical CO2 power cycles; wind energy. The American Society of Mechanical Engineers, Vol. 3B. 15 p. GT2014-25562

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  93. Published

    Compression failure mode of two CMW bone cements

    Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNAbstract

  94. Published

    Compression moulding and injection over moulding of porous PEEK components

    Siddiq, A. & Kennedy, A. R., 1/11/2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 10 p., 103996.

    Research output: Contribution to journalJournal articlepeer-review

  95. Published

    Compression of Frequency-Modulated Pulses using Helically Corrugated Waveguides and Its Potential for Generating Multigigawatt rf Radiation

    Samsonov, S. V., Phelps, A. D. R., Bratman, V. L., Burt, G., Denisov, G. G., Cross, A. W., Ronald, K., He, W. & Yin, H., 2004, In: Physical review letters. 92, 11, p. 118301 -118301

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    Computational agent to integrate expert system and simulation language.

    da Silva, J. C., Bennett, D. & Counsell, J. M., 1997, Proceedings of the 9th European simulation symposium. Germany

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  97. Published

    Computational analysis of particle-laden-airflow erosion and experimental verification

    Castorrini, A., Venturini, P., Corsini, A., Rispoli, F., Takizawa, K. & Tezduyar, T. E., 24/03/2020, In: Computational Mechanics. 65, p. 1549–1565 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  98. Published
  99. Published
  100. Published

    Computational design of light and strong high entropy alloys (HEA): Obtainment of an extremely high specific solid solution hardening

    Menou, E., Tancret, F., Toda-Caraballo, I., Ramstein, G., Castany, P., Bertrand, E., Gautier, N. & Rivera Díaz-Del-Castillo, P. E. J., 11/2018, In: Scripta Materialia. 156, p. 120-123 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  101. Published

    Computational design of model Re/Ru bearing Ni-base superalloys

    Vamsi, K. V., Goswami, K. N., Vinay, K. S., Verma, S. K., Balamuralikrishnan, R., Das, N., Banerjee, D. & Karthikeyan, S., 2014, In: MATEC Web of Conferences. 14, 1 p., 17007.

    Research output: Contribution to journalJournal articlepeer-review

  102. Published

    Computational design of nanostructured steels employing irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J., Hayashi, K. & Galindo-Nava, E. I., 10/2013, In: Materials Science and Technology (United Kingdom). 29, 10, p. 1206-1211 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  103. Published

    Computational design of UHS maraging stainless steels incorporating composition as well as austenitisation and ageing temperatures as optimisation parameters

    Xu, W., Rivera-Diaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 07/2009, In: Philosophical Magazine. 89, 20, p. 1647-1661 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  104. Published

    Computational design of UHS stainless steel strengthened by multi-species nanoprecipitates combining genetic algorithms and thermokinetics

    Xu, W., Del Castillo, P. E. J. R. D. & Van Der Zwaag, S., 1/12/2008, p. 1167-1181. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  105. Published

    Computational Fluid Dynamics Analysis of Floating Offshore Wind Turbines in Severe Pitching Conditions

    Ortolani, A., Persico, G., Drofelnik, J., Jackson, A. & Campobasso, S., 13/12/2020, In: Journal of Engineering for Gas Turbines and Power. 142, 12, 15 p., 1210003.

    Research output: Contribution to journalJournal articlepeer-review

  106. Published

    Computational Fluid Dynamics and Data-Based Mechanistic Modelling of a Forced Ventilation Chamber

    Tate, O., Wilson, E. D., Cheneler, D. & Taylor, C. J., 2018, In: IFAC-PapersOnLine. 51, 15, p. 263-268 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  107. Published

    Computer aided conceptual design '97 : proceedings of the 1997 Lancaster International Workshop on Engineering Design CACD'97.

    Bradshaw, A. & Counsell, J. M., 1997, Lancaster: Lancaster University: Centre for the Study of Environmental Change. 144 p.

    Research output: Book/Report/ProceedingsBook

  108. Published

    Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials

    Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  109. Published

    Computer aided material selection for additive manufacturing materials

    Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  110. Published

    Computer modelling of coupled-cavity travelling wave tubes

    Carter, R. G., 1/12/1983, In: IEE Colloquium (Digest). 1983, 69

    Research output: Contribution to journalConference articlepeer-review

  111. Published

    Computer Modelling of Magnetron Anodes

    Carter, R. G., Qian, B. P., Wang, G. & Feng, J. J., 1/12/1998, In: ITG-Fachbericht. 150, p. 459-464 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  112. Published

    Computer modelling of microwave tubes - a review.

    Carter, R. G., 2001, Proceedings of IVEC ’2001.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  113. Published

    Computer Simulation of Inter-Modulation Distortion in Broad-Band, Multi-Carrier, Travelling Wave Tube Amplifiers

    Carter, R. G., Bösch, W., Srivastava, V. & Gatti, G., 1/12/1998, In: ITG-Fachbericht. 150, p. 343-348 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  114. Published

    Computer simulation of intermodulation distortion in traveling wave tube amplifiers.

    Carter, R. G., Bosch, W., Srivastava, V. & Gatti, G., 01/2001, In: IEEE Transactions on Electron Devices. 48, 1, p. 178-180 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  115. Published

    Computer support environment applying object-oriented methods for hydraulic systems design.

    da Silva, J. C. & Cheung, H. F., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 117-131 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  116. Published

    Computer support for engineering design - the schemebuilder project.

    Bradley, D. A. & Bracewell, R. H., 1992, SERC/IMechE expert meeting on information technology and product design. St Albans, p. 69-73 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  117. Published

    Computer-aided design tools for space TWTs.

    Carter, R. G., Wang, P., Srivatava, V. & Sinha, A. K., 1994.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  118. Published

    Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program

    Afouxenidis, D., Polymeris, G. S., Tsirliganis, N. C. & Kitis, G., 1/05/2012, In: Radiation Protection Dosimetry. 149, 4, p. 363-370 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  119. Published

    Concealed nuclear material identification via combined fast-neutron/gamma-ray computed tomography (FNGCT): a Monte Carlo study

    Licata, M. & Joyce, M. J., 9/02/2018, In: Journal of Instrumentation. 13, 2, 16 p., P02013.

    Research output: Contribution to journalJournal articlepeer-review

  120. Published

    Concentrated photovoltaic thermal systems: A component-by-component view on the developments in the design, heat transfer medium and applications

    George, M., Pandey, A. K., Abd Rahim, N., Tyagi, V. V., Shahabuddin, S. & Rahman, S., 15/04/2019, In: Energy Conversion and Management. 186, p. 15-41 27 p.

    Research output: Contribution to journalJournal articlepeer-review

  121. Published

    Concentrations and fluxes of dissolved organic carbon in UK topsoils.

    Buckingham, S., Tipping, E. & Hamilton-Taylor, J., 15/12/2008, In: Science of the Total Environment. 407, 1, p. 460-470 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  122. Unpublished

    Conceptual design and development of a navigation system for a mobile robot

    Chandler, A., Yavuz, H., Bradshaw, A. & Seward, D., 05/1999, (Unpublished) Lancaster University.

    Research output: ThesisDoctoral Thesis

  123. Published

    Conceptual design and development of a navigation system for a mobile robot.

    Yavuz, H., Chandler, A., Bradshaw, A. & Seward, D. W., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 65-85 21 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  124. Published

    Conceptual design and modelling of a domestic mobile robot.

    Yavuz, H. & Bradshaw, A., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 15-35 21 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  125. Published

    Conceptual design of a 1MW 175MHz CW magnetron.

    Carter, R. G., 04/2009, 2009 IEEE International Vacuum Electronics Conference. Piscataway, NJ, USA: IEEE, 566 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  126. Published

    Concurrent engineering: a taxonomy of techniques.

    Chua, L., Oh, K. S. V., Bradley, D. A. & Dawson, D., 1993, Proceedings of the 2nd international conference on computer integrated manufacturing (ICCIM '93). Winsor, J. & Gay, R. (eds.). Singapore, p. 265-270 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  127. Published

    Condition monitoring of rotating machines using vibration and bearing temperature measurements

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 2014, Advances in Condition Monitoring of Machinery in Non-stationary Operations: Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013). Dalpiaz, G., Rubini, R., D'Elia, G., Cocconcelli, M., Chaari, F., Zimroz, R. & Bartelmus, W. (eds.). Berlin: Springer Verlag, p. 159-169 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  128. Published

    Condition monitoring of wind turbines based on extreme learning machine

    Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  129. Published

    Conducting polymers: New arena in dye-sensitized solar cells

    Mazlan, N. A., Shahabuddin, S., Baharin, S. N. A., Pandey, A. K. & Saidur, R., 5/09/2018, 5th IET International Conference on Clean Energy and Technology (CEAT2018). IET

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  130. Published

    Consensus-based Hierachical Demand Side Management in Microgrid

    Ma, J. & Ma, X., 11/11/2019, 2019 25th IEEE International Conference on Automation & Computing (ICAC). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  131. Published

    Constrained optimization of the shape of a wave energy collector by genetic algorithm

    McCabe, A., 03/2013, In: Renewable Energy. 51, n/a, p. 274-284 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  132. Published

    Constraint handling for state dependent parameter models.

    Exadaktylos, V., Taylor, C. J. & Chotai, A., 2008, Proceedings of the UKACC International Conference on Control.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  133. Published

    Constraints on mediator-based dark matter and scalar dark energy models using √s = 13 TeV pp collision data collected by the ATLAS detector

    Collaboration, ATLAS., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M. & Whitmore, B. W., 23/05/2019, In: Journal of High Energy Physics. 2019, 5, 87 p., 142.

    Research output: Contribution to journalJournal articlepeer-review

  134. Published

    Constructing magnetic Si-C-Fe hybrid microspheres for room temperature nitroarenes reduction

    Zhang, X., Chen, L., Yun, J., Wang, X. & Kong, J., 26/04/2017, In: Journal of Materials Chemistry A. 5, 22, p. 10986-10997 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  135. Published

    Constructing quantum dots@flake graphitic carbon nitride isotype heterojunctions for enhanced visible-light-driven NADH regeneration and enzymatic hydrogenation

    Yang, D., Zou, H., Wu, Y., Shi, J., Zhang, S., Wang, X., Han, P., Tong, Z. & Jiang, Z., 31/05/2017, In: Industrial and Engineering Chemistry Research. 56, 21, p. 6247-6255 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  136. Published

    Construction issues surrounding a portable four-band neutron detection system.

    Selwood, M. J. & Monk, S. D., 03/2011, In: Radiation Protection Dosimetry. 144, 1-4, p. 249-252 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  137. Published

    Construction of nonlinear dynamic MEMS component models using cosserat theory.

    Wang, C., Richardson, A. M. D., Liu, D., Rosing, R., Tucker, R. & De Masi, B., 05/2003, Proceedings of the SPIE design, test, integration and packaging of MEMS symposium. France: Cannes Mandelieu

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  138. Published

    Construction of Nonlinear Dynamic MEMS Component Models Using Cosserat Theory.

    Richardson, A., De Masi, B., Rosing, R. & Wang, C., 1/08/2004, In: Analog Integrated Circuits and Signal Processing. 40, 2, p. 117-130 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  139. Published

    Construction of precision wire readout planes for the Short-Baseline Near Detector (SBND)

    SBND Collaboration, Blake, A. S. T., Brailsford, D., Holt, S., Mercer, I., Nowak, J., Ratoff, P., Statter, J. & Wilson, A., 30/06/2020, In: Journal of Instrumentation.

    Research output: Contribution to journalJournal articlepeer-review

  140. Unpublished
  141. Published

    Contactless graphene conductivity mapping on a wide range of substrates with terahertz time-domain reflection spectroscopy

    Lin, H., Braeuninger-Weimer, P., Kamboj, V. S., Jessop, D. S., Degl'innocenti, R., Beere, H. E., Ritchie, D. A., Zeitler, J. A. & Hofmann, S., 6/09/2017, In: Scientific Reports. 7, 1, 9 p., 10625.

    Research output: Contribution to journalJournal articlepeer-review

  142. Published

    Continuous hydrothermal synthesis of extensive 2D sodium titanate (Na 2Ti3O7) nano-sheets

    Zhang, Z., Goodall, J. B. M., Brown, S., Karlsson, L., Clark, R. J. H., Hutchison, J. L., Rehman, I. U. & Darr, J. A., 2010, In: Dalton Transactions. 39, 3, p. 711-714 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  143. Published

    Continuous time Proportional-Integral-Plus (PIP) control with filtering polynomials.

    Taylor, C. J., Chotai, A. & Young, P. C., 1998, Proceedings of the UKACC International Conference on Control. Institution of Electrical Engineers Conference Publication No. 455, Vol. 2. p. 1391-1396 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  144. Published

    Continuous-time feed-forward proportional-integral-plus control.

    Cross, P., Taylor, C. J. & Aggidis, G. A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 229-234 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  145. Published

    Continuous-wave laser operation of a dipole antenna terahertz microresonator

    Masini, L., Pitanti, A., Baldacci, L., Vitiello, M. S., Degl'Innocenti, R., Beere, H. E., Ritchie, D. A. & Tredicucci, A., 6/10/2017, In: Light: Science and Applications. 6, 10, 5 p., e17054.

    Research output: Contribution to journalJournal articlepeer-review

  146. Published

    Contribution of electronic excitation of the structural evolution of ultrafast laser-irradiated tungsten nano films

    Murphy, S., Giret, Y., Daraszewicz, S., Lim, A., Shluger, A., Tanimura, K. & Duffy, D., 9/03/2016, In: Physical Review B: Condensed Matter and Materials Physics. 93, 10 p., 104105.

    Research output: Contribution to journalJournal articlepeer-review

  147. Published

    Control and performance improvements of a pulse compressor in use for testing accelerating structures at high power

    Dexter, A. C., 5/10/2017, In: Physical Review Accelerators and Beams. 20, 10, 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  148. Published

    Control architecture characteristics for intelligence in autonomous mobile construction robots.

    Seward, D., Agate, R. Y., Bakari, M. & Pace, C. M., 2006, Proceedings of the 24th international symposium on automation and robotics in construction.. p. 846-851 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  149. Published

    Control architectures and operational strategies for intelligent, high-powered manipulators.

    Bradley, D. A., Seward, D. W., Heikkila, T. & Vaha, P., 1994, Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Amsterdam: Elsevier, p. 367-372 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  150. Published

    Control law design for a thrust vectoring fighter aircraft using robust inverse dynamics estimation.

    Muir, E. A. & Bradshaw, A., 1996, In: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 210

    Research output: Contribution to journalJournal article

  151. Published

    Control of a dual-arm robotic manipulator

    Taylor, C. J. & Seward, D., 08/2010, In: Nuclear Engineering International. 55, 673, p. 24-26 3 p.

    Research output: Contribution to journalJournal article

  152. Published

    Control of hydraulically–actuated manipulators with dead–band and time–delay uncertainties

    Albrecht, O., Bandala Sanchez, M., Monk, S. & Taylor, J., 17/04/2020, p. 54-55. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  153. Published

    Control of micro-climate using time delay state dependent parameter models.

    Stables, M. A., Taylor, C. J. & Chotai, A., 2006, Proceedings of the 18th international conference on systems engineering (ICSE-06)..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  154. Published

    Control of nonlinear biological systems by non–minimal state variable feedback

    Taylor, C. J. & Aerts, J-M., 2014, In: Statistics in Biosciences. 6, 2, p. 290-313 24 p.

    Research output: Contribution to journalJournal articlepeer-review

  155. Published

    Control strategy for balancing wind power using hydro power and flow batteries

    Baranauskas, A., Gelazanskas, L., Azubalis, M. & Gamage, K., 2014, Energy Conference (ENERGYCON), 2014 IEEE International. Piscataway, N.J.: IEEE, p. 352-357 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  156. Published

    Control Structures of Grid-Tied Photovoltaic Systems

    Niroomand, M. & Nasr Esfahani, F., 10/02/2021, Energy Conversion Systems: An Overview. Tripathi, S. M. & Padmanaban, S. (eds.). New York: Nova Science Publishers, p. 59-133 75 p. (Energy Science, Engineering and Technology ).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  157. Published

    Control systems for WRASPA.

    Chaplin, R., Rahmati, R., Gunura, K., Ma, X. & Aggidis, G. A., 06/2009. 93 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  158. Published

    Control-focused, nonlinear and time-varying modelling of dielectric elastomer actuators with frequency response analysis

    Jacobs, W. R., Wilson, E. D., Assaf, T., Rossiter, J., Dodd, T. J., Porrill, J. & Anderson, S. R., 2015, In: Smart Materials and Structures. 24, 5, 11 p., 055002.

    Research output: Contribution to journalJournal articlepeer-review

  159. Published

    Controllable forms for stabilising pole assignment design of generalised bilinear systems

    Taylor, C. J., Chotai, A. & Burnham, K. J., 31/03/2011, In: Electronics Letters. 47, 7, p. 437-439 3 p.

    Research output: Contribution to journalLetterpeer-review

  160. Published

    Controlled growth of titania nanospheres in supercritical carbon dioxide using a novel surfactant stabilised precursor

    Kellici, S., Rehman, I. & Darr, J., 2006, In: Journal of Materials Chemistry. 16, 2, p. 159-161 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  161. Published

    Controlled modification of optical and structural properties of glass with embedded silver nanoparticles by nanosecond pulsed laser irradiation

    Fleming, L. A. H., Tang, G., Zolotovskaya, S. & Abdolvand, A., 14/04/2014, In: Optical Materials Express. 4, 5, p. 969-975 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  162. Published

    Controlled release of chlorhexidine diacetate from a porous methacrylate system: Supercritical fluid assisted foaming and impregnation

    Gong, K., Braden, M., Patel, M. P., Rehman, I. U., Zhang, Z. & Darr, J. A., 2007, In: Journal of Pharmaceutical Sciences. 96, 8, p. 2048-2056 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  163. Published

    Controlling an intelligent excavator for autonomous digging in difficult ground.

    Seward, D. W., Bradley, D. A., Mann, J. E. & Goodwin, M. R., 1992, 9th international symposium on automation and robotics in construction. Tokyo

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  164. Published

    Controlling crack formation and porosity in laser powder bed fusion: Alloy design and process optimisation

    Sabzi, H. E., Maeng, S., Liang, X., Simonelli, M., Aboulkhair, N. T. & Rivera-Díaz-del-Castillo, P. E. J., 1/08/2020, In: Additive Manufacturing. 34, 14 p., 101360.

    Research output: Contribution to journalJournal articlepeer-review

  165. Published

    Controlling thin liquid film viscosity via modification of substrate surface chemistry

    Bowen, J., Cheneler, D. & Adams, M., 5/02/2013, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 418, p. 112-116 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  166. Published

    Converging computer and home entertainment devices in the consumer media network environment.

    Gilbertson, P., Edwards, R. & Coulton, P., 01/2006, Consumer Communications and Networking Conference, 2006. CCNC 2006. 3rd IEEE. IEEE, p. 1003-1007 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  167. Published

    Conversion of furfuryl alcohol into butyl levulinate with graphite oxide and reduced graphite oxide

    Gitis, V., Chung, S-H. & Raveendran, S., 15/08/2018, In: FlatChem. 10, p. 39-44 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  168. Published

    Converter Technologies for PV Systems: A Comprehensive Review

    Niroomand, M. & Nasr Esfahani, F., 10/02/2021, Energy Conversion Systems: An Overview. Tripathi, S. M. & Padmanaban, S. (eds.). New York: Nova Science Publishers, p. 1-58 58 p. (Energy Science, Engineering and Technology ).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  169. Published

    Converting Road Kinetic Energy to Electricity for Smart City Infrastructure

    Zabihi, N., 2022, Lancaster University. 239 p.

    Research output: ThesisDoctoral Thesis

  170. Published

    Convolutional Neural Network based power generation prediction of wave energy converter

    Ni, C., Ma, X. & Bai, Y., 1/07/2019, Proceedings of the 24th International Conference on Automation and Computing. IEEE, p. 460-465 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  171. Published

    Convolutional Neural Network Based Vehicle Classification in Adverse Illuminous Conditions for Intelligent Transportation Systems

    Butt, M. A., Khattak, A. M., Shafique, S., Hayat, B., Abid, S., Kim, K-I., Ayub, M., Sajid, A. & Adnan, A., 13/02/2021, In: Complexity. 2021, 11 p., 6644861.

    Research output: Contribution to journalJournal articlepeer-review

  172. Published

    Co-ordinated studies using imaging riometer and incoherent scatter radar

    Collis, P. N. & Hargreaves, J. K., 1997, In: Journal of Atmospheric and Solar-Terrestrial Physics. 59, 8, p. 873-890 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  173. Published

    Coordination between electron transfer and molecule diffusion through a bioinspired amorphous titania nanoshell for photocatalytic nicotinamide cofactor regeneration

    Yang, D., Zhang, Y., Zhang, S., Cheng, Y., Wu, Y., Cai, Z., Wang, X., Shi, J. & Jiang, Z., 6/12/2019, In: ACS Catalysis. 9, 12, p. 11492-11501 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  174. Published

    Copper and copper selenide nanoparticles in the sol-gel matrices: structural and optical

    Gurin, V. S., Alexeenko, A. A., Zolotovskaya, S. & Yumashev, K. V., 07/2006, In: Materials Science and Engineering: C . 26, 5-7, p. 952-955 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  175. Published

    Copper prototype measurements of the HOM, LOM and SOM couplers for the ILC crab cavity

    Burt, G., Ambattu, P. K., Dexter, A., Goudket, P., McIntosh, P., Bellantoni, L., Li, Z. & Xiao, L., 1/01/2008, p. 568-570. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  176. Published
  177. Published

    Correlation between cosmic noise absorption and VHF coherent echo intensity

    Makarevitch, R. A. & Honary, F., 07/2005, In: Annales Geophysicae. 23, 5, p. 1543-1553 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  178. Published

    Correlation between TL and OSL signals in KMgF3:Ce3+: bleaching study of individual glow-peaks

    Dallas, G. I., Polymeris, G. S., Afouxenidis, D., Tsirliganis, N. C., Tsagas, N. F. & Kitis, G., 03/2010, In: Radiation Measurements. 45, 3-6, p. 537-539 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  179. Published

    Correlation between vanadium carbide size and hydrogen trapping in ferritic steel

    Turk, A., San Martín, D., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 15/07/2018, In: Scripta Materialia. 152, p. 112-116 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  180. Published

    Correlative atomic scale characterisation of secondary carbides in M50 bearing steel

    Hopkin, S. E., Danaie, M., Guetard, G., Rivera-Diaz-del-Castillo, P., Bagot, P. A. J. & Moody, M. P., 24/03/2018, In: Philosophical Magazine. 98, 9, p. 766-782 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  181. Published

    Corrigendum to “Beta particle energy spectra shift due to self-attenuation effects in environmental sources” [Nucl. Eng. Technol. 49 (7) 1483–1488]

    Alton, T. L., Monk, S. D. & Cheneler, D., 08/2018, In: Nuclear Engineering and Technology. 50, 6, p. 996 1 p.

    Research output: Contribution to journalJournal article

  182. Published

    Corrigendum to “High-pressure adsorptive storage of hydrogen in MIL-101 (Cr) and AX-21 for mobile applications: Cryocharging and cryokinetics” [Mater & Des 89 (2016) 1086–1094]

    Bimbo, N., Xu, W., Sharpe, J. E., Ting, V. P. & Mays, T. J., 5/02/2016, In: Materials and Design. 91, p. 440 1 p.

    Research output: Contribution to journalJournal article

  183. Published

    Corrosion and Oxidation Behavior of Zr58Cu22Fe4Co4Al12 Metallic Glass

    Gupta, G., Kumar, M., Chattopadhyay, C. & Mondal, K., 1/12/2011, In: Trans Indian Inst Met. 64, p. 401–408 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  184. Published

    Corrosion behaviour of AGR SIMFUELS

    Rauff-Nisthar, N., Boxall, C., Hambley, D., Hiezl, Z., Padovani, C. & Wilbraham, R., 11/08/2015, In: ECS Transactions. 66, 17, p. 85-94 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  185. Published

    Corrosion behaviour of AGR simulated fuels: evolution of the fuel surface

    Rauff-Nisthar, N., Boxall, C., Farnan, I., Hiezl, Z., Lee, W., Perkins, C. & Wilbraham, R., 09/2013, In: ECS Transactions. 53, 21, p. 95-104 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  186. Published

    Corrosion of AGR Fuel Pin Steel Under Conditions Relevant to Permanent Disposal

    Anwyl, C., Boxall, C., Wilbraham, R., Hambley, D. & Padovani, C., 2016, In: Procedia Chemistry. 21, p. 247-254 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  187. Published

    Corrugated Rectangular Waveguide Tunable Backward Wave Oscillator for Terahertz Applications

    Mineo, M. & Paoloni, C., 06/2010, In: IEEE Transactions on Electron Devices. 57, 6, p. 1481-1484 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  188. Published

    Corrugated Waveguide Slow-Wave Structure for THz Travelling Wave Tube

    Mineo, M., Paoloni, C., Di Carlo, A., Fiorello, A. M. & Dispenza, M., 2009, 2009 EUROPEAN MICROWAVE CONFERENCE, VOLS 1-3. NEW YORK: IEEE, p. 842-845 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  189. Published

    Cosmic radio noise absorption events associated with equatorward drifting arcs during a substorm growth phase

    Jussila, J. R. T., Aikio, A. T., Shalimov, S. & Marple, S. R., 04/2004, In: Annales Geophysicae. 22, 5, p. 1675-1686 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  190. Published

    Co-solvent effects in LLE of 1-hydroxyethyl-3-methylimidazolium based ionic liquids plus 2-propanol plus dichloromethane or 1,2-dichloroethane

    Najdanovic-Visak, V., Rodriguez, A., Visak, Z. P., Rosa, J. N., Afonso, C. A. M., Nunes da Ponte, M. & Rebelo, L. P. N., 15/06/2007, In: Fluid Phase Equilibria. 254, 1-2, p. 35-41 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  191. Published

    Cost effective combined axial fan and throttling valve control of ventilation rate

    Taylor, C. J., Leigh, P., Chotai, A., Young, P. C., Vranken, E. & Berckmans, D., 09/2004, In: IEE Proceedings - Control Theory and Applications. 151, 5, p. 577-584 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  192. Published

    COTS vision system, radiation sensor and 6 DoF robot for use in identifying radiologically uncharacterised objects

    Monk, S., Cheneler, D., West, C., Bandala Sanchez, M., Montazeri, A., Dixon, N. & Taylor, C. J., 21/01/2021, 2020 Australian and New Zealand Control Conference (ANZCC). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  193. Published

    Counter terrorism using commercial hardware - the 55,000,000 km/hour speed trap.

    Aspinall, M. & Joyce, M. J., 2006, Proceedings of the SET for Britain House of Commons science exhibition..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  194. Published

    Counting neutrons from the spontaneous fission of 238-U using scintillation detectors and mixed field analysers

    Parker, H., Joyce, M. & Jones, A. R., 22/05/2015.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  195. Published

    Coupled effects of the lattice rotation definition, twinning and interaction strength on the FCC rolling texture evolution using the viscoplastic φ-model

    Wen, W., M'Guil, S., Ahzi, S. & Gracio, J. J., 2013, In: International Journal of Plasticity. 46, p. 23-36 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  196. Published

    Coupler design considerations for the ILC crab cavity.

    Burt, G., Beard, C., Dexter, A., Goudket, P., McIntosh, P. & Wooldridge, E., 2006.

    Research output: Working paper

  197. Published

    Coupling in type II GaSb/GaAs quantum ring solar cells

    Montesdeoca Cardenes, D., Hodgson, P. D., De La Mata, M., Marshall, A. R. J., Molina, S. I., Carrington, P. J. & Krier, A., 14/05/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  198. Published

    Coupling self-assembling materials with digital designs to grow adaptive structures

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Doursat, R., Rennie, A. & Anwar, J., 2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  199. Published

    CPIN: Comprehensive present-interest network for CTR prediction

    Hong, W., Xiong, Z., You, J., Wu, X. & Xia, M., 15/04/2021, In: Expert Systems with Applications. 168, 8 p., 114469.

    Research output: Contribution to journalJournal articlepeer-review

  200. Published

    Cr:LiSrAlF6 channel waveguides as broadband fluorescence sources

    Majkić, A., Poberaj, G., Degl'Innocenti, R., Döbeli, M. & Günter, P., 07/2007, In: Applied Physics B. 88, p. 205-209 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  201. Published

    Crab cavities for linear colliders

    Burt, G., Ambattu, P., Carter, R., Dexter, A., Tahir, I., Beard, C., Dykes, M., Goudket, P., Kalinin, A., Ma, L., McIntosh, P., Shulte, D., Jones, R., Bellantoni, L., Chase, B., Church, M., Khabouline, T., Latina, A., Adolphsen, C., Li, Z. & 2 others, Seryei, A. & Xiao, L., 1/12/2009, p. 830-832. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  202. Published

    Crab Cavity Development

    Burt, G. C., 10/2015, The High Luminosity Large Hadron Collider: The New Machine for Illuminating the Mysteries of Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, (Advanced Series on Directions in High Energy Physics; vol. 24).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  203. Published

    Crab cavity system for the ILC.

    Burt, G., Dexter, A., Bellatoni, L., Goudket, P., Beard, C., Kalinin, A. & Ma, L., 2005, Proceedings of the ALCPG and ILC workshops.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  204. Published

    Creating Entertainment Applications for Cellular Phones.

    Coulton, P., Rashid, O., Edwards, R. & Thompson, R., 07/2005, In: Computers in Entertainment (CIE). 3, 3, p. 1-12 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  205. Forthcoming

    Creating Exact Multipolar Fields with Azimuthally Modulated RF Cavities

    Wroe, L., Sheehy, S. & Apsimon, R., 13/05/2022, (Accepted/In press) In: Physical Review Accelerators and Beams.

    Research output: Contribution to journalJournal articlepeer-review

  206. Published

    Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J., McCaskie, A. W. & Mccaskie, A. W., 11/2002, In: Journal of Materials Science: Materials in Medicine. 13, 11, p. 1021-1028 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  207. Published

    Criteria for the selection of a software development environment for construction robotic systems.

    Seward, D. W. & Zied, K., 2003, Proceedings of the 20th international symposium on automation and robotics in construction. p. 407-412 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  208. Published

    Critical review of directional neutron survey meters

    Balmer, M., Gamage, K. & Taylor, G., 2013, p. 197. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  209. Published

    Critical review of directional neutron survey meters

    Balmer, M., Gamage, K. & Taylor, G., 21/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 735, p. 7-11 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  210. Published

    Critical Review of Scintillating Crystals for Neutron Detection

    Cieslak, M., Akurugoda Gamage, K. & Glover, R., 13/09/2019, In: Crystals. 9, 17 p., 480.

    Research output: Contribution to journalJournal articlepeer-review

  211. Published

    Criticality of the [C(4)mim] [BF4] plus water system

    Cerdeirina, CA., Troncoso, N. V., Ramos, CP., Romani, L., Najdanovic-Visak, V., Guedes, HJR., Esperanca, JMSS., Visak, ZP., da Ponte, MN. & Rebelo, LPN., 2005, Ionic liquids III: fundamentals, progress, challenges, and opportunities. Rogers, R. D. & Seddon, K. R. (eds.). Washington, D. C.: American Chemical Society, p. 175-186 12 p. (ACS Symposium Series; vol. 901).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  212. Published

    Cross-comparative analysis of loads and power of pitching floating offshore wind turbine rotors using frequency-domain Navier-Stokes CFD and blade element momentum theory

    Ortolani, A., Persico, G., Drofelnik, J., Jackson, A. & Campobasso, S., 28/09/2020, In: Journal of Physics: Conference Series. 1618, 11 p., 052016.

    Research output: Contribution to journalJournal articlepeer-review

  213. Published

    Crosslinked thermoelectric hydro-ionogels: A new class of highly conductive thermoelectric materials

    Sajid, I. H., Sabri, M. F. M., Said, S. M., Salleh, M. F. M., Ghazali, N. N. N., Saidur, R., Subramaniam, B., Hasan, S. W. & Jaffery, H. A., 15/10/2019, In: Energy Conversion and Management. 198, 9 p., 111813.

    Research output: Contribution to journalJournal articlepeer-review

  214. Published

    Cross-Network Fusion and Scheduling for Heterogeneous Networks in Smart Factory

    Wan, J., Yang, J., Wang, S., Li, D., Li, P. & Xia, M., 1/09/2020, In: IEEE Transactions on Industrial Informatics. 16, 9, p. 6059-6068 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  215. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  216. Published

    Crosstalk immune interconnect driver design.

    Weerasekera, R., Pamunuwa, D. B., Zheng, L. R. & Tenhunen, H., 2004, Proceedings of the international symposium on system-on-chip conference. p. 139-142 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  217. Published

    Crosstalk in guard cell signalling.

    Worrall, D., Fletcher, S., Mills, L., McAinsh, M., Hunt, L., Gray, J. E. & Hetherington, A. M., 04/2003, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 134, Supple, p. S132

    Research output: Contribution to journalJournal articlepeer-review

  218. Published

    Crystallographic engineering of oxide semiconductors for transistors and microelectronics applications

    Thomas, S., Adamopoulos, G., Bashir, A., Bradley, D. & Anthopoulos, T., 2011, Materials Research Society.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  219. Published

    Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 02/2009, In: Acta Metallurgica et Materialia. 57, 4, p. 1220-1229 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  220. Published

    Current Situation & Perspectives of the British & European Hydro Turbine Industry & Technology for Small Hydro Power Generation.(Invited Keynote Paper)

    Aggidis, G. A., 2002, In: IMechE Conference Transactions. v. 200, 11

    Research output: Contribution to journalJournal article

  221. Published

    Current state and perspectives on transesterification of triglycerides for biodiesel production

    Salaheldeen, M., Mariod, A. A., Aroua, M. K., Rahman, S. M. A., Soudagar, M. E. M. & Fattah, I. M. R., 18/09/2021, In: Catalysts. 11, 9, 37 p., 1121.

    Research output: Contribution to journalJournal articlepeer-review

  222. Published

    Current-mode techniques for self-testing analogue circuits

    Baturone, I., SanchezSolano, S., Richardson, A. M. & Huertas, J. L., 1997, IDDQ Testing, 1997. Digest of Papers., IEEE International Workshop on . Jayasumana, AP. & Tong, C. (eds.). LOS ALAMITOS: I E E E, COMPUTER SOC PRESS, p. 33-37 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  223. Published

    Current-Source Modular Medium-Voltage Grid-Connected System with High-Frequency Isolation for Photovoltaic Applications

    Darwish, A. & Elgenedy, M., 1/03/2019, In: IEEE Transactions on Energy Conversion. 34, 1, p. 255 - 266 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  224. Published

    Current-source Single-phase Module Integrated Inverters for PV Grid-connected Applications

    Darwish, A., Alotaibi, S. & Elgenedy, M. A., 17/03/2020, In: IEEE Access. 8, p. 53082 - 53096 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  225. Published

    Customised mode profiles using functional materials

    Gratus, J., Kinsler, P., Letizia, R. & Boyd, T., 14/07/2016, In: arxiv.org.

    Research output: Contribution to journalJournal article

  226. Published

    Customizing longitudinal electric field profiles using spatial dispersion in dielectric wire arrays

    Boyd, T., Gratus, J., Kinsler, P. & Letizia, R., 5/02/2018, In: Optics Express. 26, 3, p. 2478-2494 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  227. Published

    Cyclic carbonate synthesis from CO2 and epoxides using zinc(II) complexes of arylhydrazones of β-diketones

    Montoya, C. A., Gomez, C. F., Paninho, A. B., Nunes, A. V. M., Mahmudov, K. T., Najdanovic, V., Martins, L. M. D. R. S., Guedes da Silva, F. C., Pombiero, A. J. L. & Nunes da Ponte, M., 03/2016, In: Journal of Catalysis. 335, p. 135-140 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  228. Published

    Cytocompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S. M., Grant, D. M. & Wood, J. V., 25/04/2000, In: Biomedical Engineering - Applications, Basis and Communications. 12, 2, p. 55-59 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  229. Published

    Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S., Grant, D. M. & Wood, J. V., 2000, Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore . Khor, K. A. (ed.). Singapore: World Scientific Publishing, p. 141-148 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  230. Published

    D region HF radar echoes associated with energetic particle precipitation and pulsating aurora

    Milan, S. E., Hosokawa, K., Lester, M., Sato, N., Yamagishi, H. & Honary, F., 14/07/2008, In: Annales Geophysicae. 26, 7, p. 1897-1904 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  231. Published

    DACCORD: integrated and co-ordinated control.

    Kotsialos, A., Ellouni, N., Middelham, F., van Schuppen, J. & Taylor, C. J., 1998, 8th World Conference on Transportation Research. Pergamon

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  232. Published

    Dairy-inspired coatings for bone implants from whey protein isolate-derived self-assembled fibrils

    Rabe, R., Hempel, U., Martocq, L., Keppler, J. K., Aveyard, J. & Douglas, T., 3/08/2020, In: International Journal of Molecular Sciences. 21, 15, 7 p., 5544.

    Research output: Contribution to journalJournal articlepeer-review

  233. Published

    Damage evolution around primary carbides under rolling contact fatigue in VIM-VAR M50

    Guetard, G., Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/10/2016, In: International Journal of Fatigue. 91, 1, p. 59-67 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  234. Published

    Damping of unwanted modes in SRF deflecting/crabbing cavities

    Burt, G. & Wang, H., 11/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 734, Part A, p. 65-71 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  235. Published

    Dark current spikes as an indicator of mobile dislocation dynamics under intense dc electric fields

    Engelberg, E. Z., Paszkiewicz, J., Peacock, R., Lachmann, S., Ashkenazy, Y. & Wuensch, W., 17/12/2020, In: Physical Review Accelerators and Beams. 23, 12

    Research output: Contribution to journalJournal articlepeer-review

  236. Published

    Darrieus wind turbine blade unsteady aerodynamics: a three-dimensional Navier-Stokes CFD assessment

    Balduzzi, F., Drofelnik, J., Bianchini, A., Ferrara, G., Ferrari, L. & Campobasso, M. S., 1/06/2017, In: Energy. 128, p. 550-563 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  237. E-pub ahead of print

    Data Driven Analysis for Electricity Theft Attack-Resilient Power Grid

    Khan, I. U., Javaid, N., Taylor, C. J. & Ma, X., 25/03/2022, (E-pub ahead of print) In: IEEE Transactions on Power Systems. 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  238. Published

    Data encoding system

    Chippendale, P., Honary, B., Arthur, P., Maundrell, M. & DRA Malvern (Patent applicant), 02/1999, Patent No. PCT GB 98/01877

    Research output: Patent

  239. Published

    Data encoding system

    Honary, B., Chippendale, P., Arthur, P., Maundrell, M. & DRA Malvern (Patent applicant), 1997, Patent No. 2576002

    Research output: Patent

  240. Published

    Data interpretation from Leuze RotoScan sensor for robot localisation and environment mapping.

    Seward, D. W., Quayle, S. D., Kied, K. & Pace, C., 2002, Proceedings of the 19th international symposium on automation and robotics in construction.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  241. Published

    Data mining for degradation modelling

    Lin, H., Kong, L. & Hsu, H-Y., 2008, Saarbrücken: VDM Verlag Dr. Müller. 124 p.

    Research output: Book/Report/ProceedingsBook

  242. Published

    Data protection and transmission over low voltage in-house power line channel

    Fallows, K., Yazdani, J., Brown, P. & Honary, B., 03/1998, Proceedings of the 2nd International Symposium on Power-Line Communications and its Applications. Tokyo, Japan: ISPLC, 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  243. Published

    Data-Based Mechanistic Modelling (DBM) and control of mass and energy transfer in agricultural buildings

    Price, L., Young, P. C., Berckmans, D., Janssens, K. & Taylor, C. J., 1999, In: Annual Reviews in Control. 23, 1, p. 71-82 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  244. Published

    Data-based modelling and proportional integral plus (PIP) control of nitrate in an activated sludge benchmark

    Ghavipanjeh, F., Taylor, C. J., Young, P. C. & Chotai, A., 01/2001, In: Water Science and Technology. 44, 1, p. 87-94 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  245. Published

    Data-based modelling and proportional integral plus (PIP) control of nitrate in an activated sludge benchmark.

    Ghavipanjeh, F., Taylor, C. J., Young, P. C. & Chotai, A., 2000, Proceedings of Aquatech: conference on wastewater and EU nutrient guidelines. Amsterdam

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  246. Published

    Data-driven condition monitoring approaches to improving power output of wind turbines

    Qian, P., Ma, X., Zhang, D. & Wang, J., 1/08/2019, In: IEEE Transactions on Industrial Electronics. 66, 8, p. 6012 - 6020 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  247. Published

    Data-Driven Constitutive Model for the Inelastic Response of Metals: Application to 316H Steel

    Tallman, A. E., Kumar, M. A., Castillo, A., Wen, W., Capolungo, L. & Tomé, C. N., 31/12/2020, In: Integrating Materials and Manufacturing Innovation. 9, 4, p. 339-357 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  248. Unpublished

    Data-driven model-based approaches to condition monitoring and improving power output of wind turbines

    Qian, P., 2017, (Unpublished) Lancaster University. 183 p.

    Research output: ThesisDoctoral Thesis

  249. Published

    Data-driven prognosis method using hybrid deep recurrent neural network

    Xia, M., Zheng, X., Imran, M. & Shoaib, M., 1/08/2020, In: Applied Soft Computing Journal. 93, 8 p., 106351.

    Research output: Contribution to journalJournal articlepeer-review

  250. Published

    D-band point to multi-point deployment with G-band transport

    Paoloni, C., Krozer, V., Magne, F., Le, T., Basu, R., Mahadev Rao, J., Letizia, R., Limiti, E., Marilier, M., Ulisse, G., Ramirez, A., Vidal, B. & Yacob, H., 21/09/2020, 29th European Conference on Networks and Communications, EuCNC 2020. IEEE, p. 84-88 5 p. (European Conference on Networks and Communications (EuCNC); vol. 2020).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  251. Published

    D-band Transmission Hub for Point to MultiPoint Wireless Distribution

    Paoloni, C., Letizia, R., Hossain, M., Krozer, V., Quang, T. L., Basu, R., Limiti, E., Magne, F., Marilier, M., Ramirez, A., Mahadev Rao, J., Ulisse, G., Vidal, B. & Yacob, H., 12/01/2020. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  252. Published

    Deactivation of the preferential oxidation of CO in packed bed reactor by 3D modelling and near-infrared tomography

    Alzahrani, F., Rusi, H., Assabumrungrat, S., Fernandes, D. L. A. & Aiouache, F., 15/12/2019, In: Chemical Engineering Journal. 378, 21 p., 122082.

    Research output: Contribution to journalJournal articlepeer-review

  253. Published

    Dead time (a ghost story).

    Wilson, S. T. & Botting, F., 2000, The limits of death : between philosophy and psychoanalysis. Morra, J., Robson, M. & Smith, M. (eds.). Manchester: Manchester University Press, p. 57-78 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  254. Published

    Dealing with observational data in control

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 2018, In: Annual Reviews in Control. 46, p. 94-106 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  255. Published

    Decay rate of boundary effects in laminated composite cylinders and cylindrical panels.

    Ye, J., 1998, Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  256. Published

    Decay rate of edge effects in cross-ply-laminated hollow cylinders

    Ye, J. Q., 02/2001, In: International Journal of Mechanical Sciences. 43, 2, p. 455-470 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  257. Unpublished

    Decontamination method comparison testing using simulated contamination

    Demmer, R., 2016, (Unpublished) Lancaster University. 268 p.

    Research output: ThesisDoctoral Thesis

  258. Published

    Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine

    Topakci, M., Celik, H. K., Canakci, M., Rennie, A., Akinci, I. & Karayel, D., 04/2010, In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  259. E-pub ahead of print

    DefAP: A Python code for the analysis of point defects in crystalline solids

    Neilson, W. D. & Murphy, S. T., 31/07/2022, In: Computational Materials Science. 210, 11 p., 111434.

    Research output: Contribution to journalJournal articlepeer-review

  260. Published

    Defect oriented test development based on inductive fault analysis

    Richardson, A., Kerkhoff, H. G. & Harvey, R., 22/06/1995, p. 2-11. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  261. Published

    Defect prevention in selective laser melting components: Compositional and process effects

    Sabzi, H. E. & Rivera-Díaz-del-Castillo, P. E. J., 18/11/2019, In: Materials. 12, 22, 15 p., 3791.

    Research output: Contribution to journalJournal articlepeer-review

  262. Published

    Defect processes in MgAl2O4 spinel

    Ball, J. A., Murphy, S. T., Grimes, R. W., Bacorisen, D., Smith, R., Uberuaga, B. P. & Sickafus, K. E., 06/2008, In: Solid State Sciences. 10, 6, p. 717-724 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  263. Published

    Defect-oriented vs. chematic-level based fault simulation for mixed-signal ICs.

    Olbrich, T., Perez, J., Grout, I., Richardson, A. & Ferrer, C., 1996, Proceedings of the international test conference 1996. Washington DC, p. 511-520 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  264. Published

    Defining ‘critical speed’ in driver-vehicle systems

    West, C. & Cao, D., 10/2013, p. 4155-4160. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  265. Published

    Deformation behaviour simulation of an apple under drop case by finite element method

    Celik, H. K., Rennie, A. & Akinci, I., 05/2011, In: Journal of Food Engineering. 104, 2, p. 293-298 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  266. Published

    Deformation mechanisms in hexagonal close-packed high-entropy alloys

    Wang, Z., Bao, M. L., Wang, X. J., Liaw, P. K., Guo, R. P. & Qiao, J. W., 7/05/2021, In: Journal of Applied Physics. 129, 17, 10 p., 175104.

    Research output: Contribution to journalJournal articlepeer-review

  267. Published

    Deformation of materials

    Green, S. M., 02/2006, In: Current Orthopaedics. 20, 1, p. 9-15 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  268. Published

    Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

    Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  269. Published

    Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips

    Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  270. Published

    Deformation twinning-induced dynamic recrystallization during laser powder bed fusion

    Sabzi, H. E., Li, X-H., Zhang, C., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/01/2022, In: Scripta Materialia. 207, 114307.

    Research output: Contribution to journalJournal articlepeer-review

  271. Published

    Deformed intruder band in I113

    Paul, E. S., Beausang, C. W., Forbes, S. A., Gale, S. J., James, A. N., Jones, P. M., Joyce, M. J., Clark, R. M., Hauschild, K., Hibbert, I. M., Wadsworth, R., Cunningham, R. A., Simpson, J., Davinson, T., Page, R. D., Sellin, P. J., Woods, P. J., Fossan, D. B., Lafosse, D. R., Schnare, H. & 3 others, Waring, M. P., Gizon, A. & Gizon, J., 1993, In: Physical Review C. 48, p. 490-493 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  272. Published

    Deformed intruder band in Te112: First evidence for rotational behavior in the tellurium isotopes

    Paul, E. S., Beausang, C. W., Forbes, S. A., Gale, S. J., James, A. N., Jones, P. M., Joyce, M. J., Andrews, H. R., Janzen, V. P., Radford, D. C., Ward, D., Clark, R. M., Hauschild, K., Hibbert, I. M., Wadsworth, R., Cunningham, R. A., Simpson, J., Davinson, T., Page, R. D., Sellin, P. J. & 10 others, Woods, P. J., Fossan, D. B., LaFosse, D. R., Schnare, H., Waring, M. P., Gizon, A., Gizon, J., Drake, T. E., DeGraaf, J. & Pilotte, S., 1994, In: Physical Review C. 50, p. 698-706 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  273. Published

    Degenerate superdeformed states in Gd150

    Beausang, C. W., Fallon, P., Clarke, S., Beck, F. A., Byrski, T., Curien, D., Dagnall, P. J., DeFrance, G., Duchêne, G., Forsyth, P. D., Haas, B., Joyce, M. J., Macchiavelli, A. O., Paul, E. S., Sharpey-Schafer, J. F., Simpson, J., Twin, P. J. & Vivien, J. P., 1993, In: Physical review letters. 71, p. 1800-1803 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  274. Published

    Degradation of polymer films

    Cheneler, D. & Bowen, J., 2013, In: Soft Matter. 9, 2, p. 344-358 15 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  275. Published

    Delay-balanced smart repeaters for on-chip global signaling.

    Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 12/02/2007, Proc. International Conference on VLSI Design. Bangalore: IEEE, p. 308-313 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  276. Published

    Delayed volatiles release phenomenon at higher temperature in TGA via sample encapsulation technique

    Kay Lup, A. N., Abnisa, F., Wan Daud, W. M. A. & Aroua, M. K., 15/12/2018, In: Fuel. 234, p. 422-429 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  277. Published

    Delayless identification in ANC systems using Subband adaptive techniques

    Karna, S. & Montazeri, A., 12/2016, In: International Journal of Signal Processing Systems. 4, 6, p. 459-464 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  278. Published

    Delivering 3D advertising to mobile phones.

    Chehimi, F., Coulton, P. & Edwards, R., 01/2006. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  279. Published

    Delivering a low-carbon electricity system in a liberalised market

    Kemp, R. J., 07/2016, Delivering Energy Law and Policy in the EU and the US: a reader. Heffron, R. & Little, G. (eds.). Edinburgh: Edinburgh University Press, p. 163-171 9 p. 32

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  280. Published

    Delivering Bio-Mems & Microfluidic Education Around Accessible Technologies

    Richardson, A., Liu, H., Koltsov, D., Rosing, R., Ryan, T. & Wooton, R., 28/05/2008, Proceedings of the 8th European Workshop on Microelectronics Education. EDA Publishing, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  281. Published

    Delivering eco design business support to SMEs on a transnational scale: benefits and learning outcomes

    Lambert, C., Rennie, A., Baker, N. & Hjelm, O., 7/11/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  282. Published

    Delivering Regional Eco-Innovation through Knowledge Exchange

    Lambert, C. & Rennie, A., 25/10/2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  283. Published

    Demand side management in smart grid: a review and proposals for future direction

    Gelazanskas, L. & Gamage, K., 02/2014, In: Sustainable Cities and Society. 11, p. 22-30 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  284. Published

    Dental materials for cleft palate repair

    Sharif, F., Ur Rehman, I., Muhammad, N. & MacNeil, S., 1/04/2016, In: Materials Science and Engineering: A. 61, p. 1018-1028 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  285. Published

    Dental regeneration

    Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  286. Published

    Deoxy-sugar releasing biodegradable hydrogels promote angiogenesis and stimulate wound healing

    Yar, M., Shahzadi, L., Mehmood, A., Raheem, M. I., Roman, S., Chaudhry, A. A., Rehman, I. U., Douglas, C. W. I. & MacNeil, S., 1/12/2017, In: MATERIALS TODAY COMMUNICATIONS. 13, p. 295-305 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  287. Published

    Depicting corrosion-born defects in pipelines with combined neutron/γ ray backscatter: a biomimetic approach

    Licata, M., Aspinall, M., Bandala Sanchez, M., Cave, F. D., Conway, S., Gerta, D., Parker, H., Roberts, N., Taylor, G. & Joyce, M., 30/01/2020, In: Scientific Reports. 10, 1, 11 p., 1486.

    Research output: Contribution to journalJournal articlepeer-review

  288. Published

    Depth Determination of Buried Caesium-137 and Cobalt-60 Sources Using Scatter Peak Data.

    Adams, J. C., Mellor, M. & Joyce, M. J., 2010, In: IEEE Transactions on Nuclear Science. 57, 5, p. 2752-2757 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  289. Published

    Depth profile scanning of cylindrical bar and wire using a spectroscopic direct current injection technique.

    Dickinson, S. J., Binns, R., Peyton, A. J. & Yin, W., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 39-44 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  290. Published

    Depth profiling 137Cs and 60Co non-intrusively for a suite of industrial shielding materials and at depths beyond 50mm

    Adams, J., Joyce, M. & Mellor, M., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1150–1153 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  291. Published

    Depth profiling of radiological contamination in sand using Principal Component Analysis.

    Adams, J. C., Mellor, M. & Joyce, M. J., 2010, p. 15-1-15-6.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  292. Published

    Depth profiling with Principle component Analysis in a variety of contrasting media

    Adams, J., Joyce, M. & Mellor, M., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  293. Published

    Derivatisation-free characterisation and supercritical conversion of free fatty acids into biodiesel from high acid value waste cooking oil

    Aboelazayem, O., Gadalla, M. & Saha, B., 31/12/2019, In: Renewable Energy. 143, p. 77-90 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  294. Published

    Describing the deformation behaviour of TRIP and dual phase steels employing an irreversible thermodynamics formulation

    Li, S., Honarmandi, P., Arróyave, R. & Rivera-Diaz-Del-Castillo, P. E. J., 1/10/2015, In: Materials Science and Technology (United Kingdom). 31, 13b, p. 1658-1663 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  295. Published

    Design and Additive Manufacturing of a Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19)

    Celik, H. K., Kose, O., Ulmeanu, M-E., Rennie, A., Abram, T. & Akinci, I., 7/08/2020, In: International Journal of Bioprinting. 6, 4, 21 p., 286.

    Research output: Contribution to journalJournal articlepeer-review

  296. Published

    Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming

    Gu, Z., Hou, X. & Ye, J., 1/11/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 22, p. 5917-5930 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  297. Published

    Design and analysis of an RLS-type modified filtered-x algorithm for adaptive IIR filters

    Montazeri, A. & Poshtan, J., 2008, Signal Processing, 2008. ICSP 2008. 9th International Conference on. Yuan, B. Z., Ruan, Q. Q. & Tang, X. F. (eds.). New York: IEEE, p. 219-222 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  298. Published

    Design and analysis of robust minimax LQG controller for an experimental beam considering spill-over effect

    Montazeri, A., Poshtan, J. & Yousefi-Koma, A., 09/2011, In: IEEE Transactions on Control Systems Technology. 19, 5, p. 1251-1259 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  299. Published

    Design and application of PIP controllers: robust control of the IFAC ’93 benchmark

    Chotai, A., Taylor, C. J. & Young, P. C., 1/08/2001, In: Transactions of the Institute of Measurement and Control. 23, 3, p. 183-200 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  300. Published

    Design and capital cost optimisation of three-phase gravity separators

    Ahmed, T., Russell, P., Makwashi, N., Hamad, F. & Gooneratne, S., 23/06/2020, In: Heliyon. 6, 6, 13 p., E04065.

    Research output: Contribution to journalJournal articlepeer-review

  301. Published

    Design and characterization of meander line slow wave structures for W-band space traveling wave tubes

    Socuellamos, J., 2021, Lancaster University. 204 p.

    Research output: ThesisDoctoral Thesis

  302. Published

    Design and comparison of LQG/LTR and H-infinity controllers for a VSTOL flight control system

    Zarei, J., Montazeri, A., Motlagh, M. R. J. & Poshtan, J., 08/2007, In: Journal of The Franklin Institute. 344, 5, p. 577-594 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  303. Published

    Design and Computer Simulation of High Efficiency Broadband Parallel-Circuit Class E RF Power Amplifier with Reactance Compensation Technique

    Narendra, K., Prakash, C., Andrei, G., Paoloni, C. & Median, A., 2008, 2008 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-4. NEW YORK: IEEE, p. 77-80 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  304. Published

    Design and degradation modelling through artificial neural networks

    Lin, H., Kong, L. X. & Hsu, H-Y., 2007, In: International Journal of Manufacturing Research. 2, 1, p. 97-113 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  305. Published

    Design and Development of a Mobile Sensor Network for the Nuclear Industry

    Can, A. & Montazeri, A., 9/11/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  306. Published

    Design and Development of a Novel Controller for Robust Attitude Control of an Unmanned Air Vehicle for Nuclear Environments

    Nemati, H. & Montazeri, A., 1/11/2018, 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, p. 373-378 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  307. Published

    Design and development of a novel multistation MTP joint simulator for in vitro testing

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  308. Published

    Design and development of a real-time readout electronics system to retrieve data from a square multi-anode photomultiplier tube for neutron gamma pulse shape discrimination

    Cieslak, M. & Akurugoda Gamage, K. A., 15/08/2016, Proceedings of the 20th IEEE-NPSS Real Time Conference 2016. IEEE, 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  309. Published

    Design and Fabrication of a 1 THz Backward Wave Amplifier

    Paoloni, C., Mineo, M., Krozer, V., Di Carlo, A., Brunetti, F., Ulisse, G., Durand, A., Kotiranta, M., Fiorello, A. M., Dispenza, M., Secchi, A., Zhurbenko, V., Bouamrane, F., Megtert, S., Bouvet, T., Tamburri, E., Cojocarua, C. -S. & Gohier, A., 12/2011, In: Terahertz Science and Technology. 4, 4, p. 149-163 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  310. Published

    Design and fabrication of a D-band traveling wave tube for millimeter wave communications

    Basu, R., Billa, L., Mahadev Rao, J., Letizia, R. & Paoloni, C., 21/10/2019, 2019 44th International Conference on Infrared Millimeter and Terahertz Waves. IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  311. Published

    Design and fabrication of a sheet beam BWO at 346 GHz

    Popovic, B., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, p. 1-2 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  312. Published

    Design and fabrication of cranioplasty prostheses: fit evaluation between phantom-based haptic environment and Materialise 3-Matic Software

    Hasib, H., Yahaya, S. H., Mohamad, A. K., Bani Hashim, A. Y., Ali Mokhtar, N. & Simha, S. S., 2013, In: Journal of Advanced Manufacturing Technology. 7, 1, p. 87-96 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  313. Published

    Design and fabrication of double corrugated waveguide for a Ka-band traveling wave tube

    Paoloni, C., Mineo, M., Busnell, L., Beardsley, M., Henry, M. & Huggard, P. G., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  314. Unpublished

    Design and fabrication of novel, geometrically optimised conical inline filters/strainers for use in the process industries.

    Vijayakumar, B., 7/10/2020, (Unpublished) Lancaster University. 308 p.

    Research output: ThesisDoctoral Thesis

  315. Published

    Design and implementation of a planar helix for traveling wave tubes based on package compatible ball grid array technology

    Babaeihaselghobi, A., Nadeem Akram, M., Badri Ghavifekr, H., Billa, L. R., Bardalen, E. & Ohlckers, P. A., 1/05/2020, In: Microsystem Technologies. 26, p. 1681–1687 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  316. Published

    Design and implementation of a proportional-integral-plus (PIP) control system for temperature, humidity and carbon dioxide in a glasshouse.

    Lees, M. J., Taylor, J., Chotai, A., Young, P. C., Chalabi, Z. S. & Tych, W., 1996, In: Acta Horticulturae (ISHS). 406, p. 115-124 10 p.

    Research output: Contribution to journalJournal article

  317. Published

    Design and operation of a compact 1 MeV X-band Linac

    Burt, G., Ambattu, P., Lingwood, C., Abram, T., Burrows, I., Corlett, P., Goulden, A., Hartnett, T., Hindley, P., McIntosh, P. A., Middleman, K., Saveliev, Y., Smith, R. & White, C., 2012, Proceedings of LINAC2012, Tel-Aviv, Israel. p. 183-185 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  318. Published

    Design and Optimisation of a Three Layers Thermal Neutron, Fast Neutron and Gamma-Ray Imaging System

    Al Hamrashdi, H., Cheneler, D. & Monk, S., 20/01/2020, EPJ Web of Conferences: ANIMMA 2019 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications. EPJ Web of Conferences, Vol. 225. 7 p. 07002

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  319. Published

    Design and performance of an adaptive MFSK HF terminal.

    Clark, P. D. J., Horley, N., Darnell, M., Honary, B. & Maundrell, M., 07/1994, HF Radio Systems and Techniques, 1994., Sixth International Conference on. IEEE, p. 330-332 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  320. Published

    Design and realization aspects of 1-THz cascade backward wave amplifier based on double corrugated waveguide

    Paoloni, C., Di Carlo, A., Bouamrane, F., Bouvet, T., Durand, A. J., Kotiranta, M., Krozer, V., Megtert, S., Mineo, M. & Zhurbenko, V., 2013, In: IEEE Transactions on Electron Devices. 60, 3, p. 1236-1243 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  321. Published

    Design and reliability-based optimization of the piezoelectric flex transducer

    Luo, L., 2018, Lancaster University. 209 p.

    Research output: ThesisDoctoral Thesis

  322. Published

    Design and self-test for switched-current building blocks

    Olbrich, T. & Richardson, A., 1996, In: IEEE Design and Test of Computers. 13, 2, p. 10-17 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  323. Published

    Design and simulation of a multi-function MEMS sensor for health and usage monitoring.

    Xu, Z., Kotsov, D., Richardson, A., Li, L. & Begbie, M., 12/01/2010, In: Proceedings of IEEE Prognostics & System Health Management Conference. p. 1-7 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  324. Published

    Design and simulation of an integrated process for biodiesel production from waste cooking oil using supercritical methanolysis

    Aboelazayem, O., Gadalla, M. & Saha, B., 15/10/2018, In: Energy. 161, p. 299-307 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  325. Published

    Design and simulation studies of the novel beam arrival monitor pickup at Daresbury Laboratory

    Kalinin, A., Thakker, T., Jamison, S., Burt, G. C., Apsimon, R. J. & Dexter, A. C., 06/2016, Proceedings of IPAC2016, Busan, Korea. Petit-Jean-Genaz, C., Kim, D. E., Kim, K. S., Ko, I. S., Kim, K. R. & Schaa, V. R. W. (eds.). Geneva: JACoW, p. 334-336 3 p. MOPMR038

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  326. Published

    Design and structural optimisation of a tractor mounted telescopic boom crane

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924

    Research output: Contribution to journalJournal articlepeer-review

  327. Published

    Design and Test of an Oscillation-based System Architecture for DNA Sensor Arrays

    Liu, H., Kerkhoff, H. G., Richardson, A., Zhang, X., Nouet, P. & Azais, F., 1/06/2005, Proceedings of 11th International Mixed Signal Test Workshop, Cannes, France. France: TIMA Laboratory, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  328. Published

    Design and testing of a four rod crab cavity for High Luminosity LHC

    Hall, B., Burt, G. C., Apsimon, R. J., Lingwood, C., Tutte, A., Grudiev, A., Macpherson, A., Navarro-Tapia, M., Calaga, R., Hernández-Chahín, K., Appleby, R. & Goudket, P., 3/01/2017, In: Physical Review Special Topics: Accelerators and Beams. 20, 1, 17 p., 012001.

    Research output: Contribution to journalJournal articlepeer-review

  329. Published

    Design and testing of a novel neutron survey meter

    Balmer, M., 2016, Lancaster University. 211 p.

    Research output: ThesisDoctoral Thesis

  330. Published

    Design and vertical tests of double-quarter wave cavity prototypes for the high-luminosity LHC crab cavity system

    Verdú-Andrés, S., Burt, G. C. & Shipman, N., 13/08/2018, In: Physical Review Accelerators and Beams. 21, 8, 14 p., 082002.

    Research output: Contribution to journalJournal articlepeer-review

  331. Published

    Design approach for the development of a cryomodule for compact crab cavities for Hi-Lumi LHC

    Pattalwar, S., Jones, T., Templeton, N., Goudket, P., McIntosh, P. A., Wheelhouse, A., Burt, G. C., Hall, B., Wright, L. & Peterson, T., 29/01/2014, In: AIP Conference Proceedings. 1573, 1, p. 795-802 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  332. Published

    Design Considerations for On-line Testing of a Capacitive Accelerometer.

    Jeffery, C., Bunyan, R. J. T., Combes, D., King, D. O. & Richardson, A. M. D., 2005, Proceedings of the 11th IEEE International Mixed-Signals Testing Workshop. p. 220-223 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  333. Published

    Design considerations of microcavity ring resonators

    Abujnah, N., Letizia, R. & Obayya, S. S. A., 08/2011, In: IET Optoelectronics. 5, 4, p. 158-164 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  334. Published

    Design considerations on complementary split ring resonator-loaded waveguides for Wakefield generation

    Sharples, E. & Letizia, R., 12/2016, In: IEEE Transactions on Plasma Science. 44, 12, p. 3281-3287 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  335. Published

    Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410

    Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  336. Published

    Design for Micro and Nano Manufacture; The "PATENT-DfMM Network of Excellence: Modelling and Simulation Cluster

    Richardson, A., Slattery, O. & Rencz, M., 1/04/2006, Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2006. EuroSime 2006. 7th International Conference on. p. 1 -5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  337. Published

    Design for testability strategies for a high performance gain control circuit.

    Lechner, A., Richardson, A. M. D., Hermes, B. & Perkins, A., 1998, Proceedings of the international IEEE mixed signal test workshop. The Hague

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  338. Published

    Design for testability strategies for mixed signal and analogue designs: from layout to system.

    Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  339. Published

    Design method for Double Corrugation Rectangular Waveguide THz vacuum amplifiers

    Mineo, M., Paoloni, C., Bariou, D., David, J-F. & Durand, A. J., 1/05/2010, Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, p. 325 -326 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  340. Published

    Design of 71-76 GHz Double-Corrugated Waveguide Traveling-Wave Tube for Satellite Downlink

    Li, X., Huang, X., Mathisen, S., Letizia, R. & Paoloni, C., 06/2018, In: IEEE Transactions on Electron Devices. 65, 6, p. 2195-2200 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  341. Published

    Design of a chattering-free sliding mode control system for robust position control of a quadrotor

    Can, A., Efstathiades, H. & Montazeri, A., 28/12/2020, Proceedings of the 2020 International Conference of Nonlinearity, Information and Robotics (NIR). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  342. Published

    Design of a coaxial window for high power CW magnetron

    Jie, W. & Carter, R. G., 1/01/1998, ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings. Liao, F-J. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 744-747 4 p. 768396. (ICMMT 1998 - 1998 International Conference on Microwave and Millimeter Wave Technology, Proceedings; vol. 1998-August).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  343. Published

    Design of a compact photonic crystal sensor

    Derbali, J., AbdelMalek, F., Obayya, S. S. A., Bouchriha, H. & Letizia, R., 07/2011, In: Optical and Quantum Electronics. 42, 8, p. 463-472 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  344. Published

    Design of a controller for a highly coupled VSTOL aircraft.

    Bennett, D., Burge, S. E. & Bradshaw, A., 1999, In: Transactions of the Institute of Measurement and Control. 21, 2-3, p. 63-75 13 p.

    Research output: Contribution to journalJournal article

  345. Published

    Design of a controller for a high-performance fighter aircraft using robust inverse dynamics estimation.

    Muir, E. H. M. & Bradshaw, A., 1994, Proceedings of an IMechE conference: Aerotech'94. Birmingham

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  346. Published

    Design of a Detector for Characterizing Neutron Fields for Single-Event Effects Testing

    Cai, X. X., Platt, S. & Monk, S. D., 06/2011, In: IEEE Transactions on Nuclear Science. 58, 3 Part 2, p. 1123-1128 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  347. Published

    Design of a Dielectric-lined Waveguide for Terahertz-driven Linear Electron Acceleration

    Healy, A., Burt, G. C., Jamison, S., Graham, D. & Cliffe, M., 05/2017, Proceedings of the 28th Linear Accelerator Conference: LINAC2016. Yamazaki, Y., Facco, A., McCausey, A. & Schaa, V. R. W. (eds.). JACoW, p. 158-160 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  348. Published

    Design of a high-gain silicon BJT and an E- pHEMT hybrid matrix amplifier with an optimum filter-matching technique

    Sangaran, P., Narendra, K. & Paoloni, C., 2/10/2019, In: IET Microwaves, Antennas and Propagation. 13, 12, p. 2153 – 2158 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  349. Published

    Design of a matrix amplifier using FET-gate-width tapering

    DAGOSTINO, S. & PAOLONI, C., 5/02/1995, In: Microwave and Optical Technology Letters. 8, 2, p. 118-121 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  350. Published

    Design of a MIMO neuro-controller for ANC system with loudspeaker nonlinearity in enclosure

    Montazeri, A. & Poshtan, J., 2007, Signal Processing and Communications, 2007. ICSPC 2007. IEEE International Conference on. New York: IEEE, p. 1415-1418 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  351. Published

    Design of a neutrino source based on beta beams

    Burt, G., Dexter, A. & Wildner, E., 23/07/2014, In: Physical Review Special Topics: Accelerators and Beams. 17, 51 p., 071002 .

    Research output: Contribution to journalJournal articlepeer-review

  352. Published

    Design of a radio frequency heated isothermal micro-trickle bed reactor

    Aiouache, F., 1/05/2014, In: Chemical Engineering Journal. 243, p. 225-233 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  353. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Liu, L. & Ma, X., 2013, In: Journal of Networks. 8, 5, p. 1019-1026 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  354. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  355. Published

    Design of a reduced-order nonlinear observer for vehicle velocities estimation

    Guo, H., Chen, H., Cao, D. & Jin, W., 2013, In: IET Control Theory and Applications. 7, 17, p. 2056–2068 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  356. Published

    Design of a robust LQG controller based on subspace identified models for vibration supression of a flexible plate

    Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 04/2011, p. 842-845. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  357. Published

    Design of a terahertz cascade backward wave amplifier

    David, J-F., Durand, A., Mineo, M. & Paoloni, C., 06/2014, In: IEEE Transactions on Electron Devices. 61, 6, p. 1715-1720 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  358. Published

    Design of autopilots for high performance missiles.

    Bradshaw, A. & Counsell, J. M., 1992, In: Journal of Systems and Control. 206, p. 75-84 10 p.

    Research output: Contribution to journalJournal article

  359. Published

    Design of D-band Double Corrugated Waveguide TWT for Wireless Communications

    Basu, R., Billa, L., Mahadev Rao, J., Letizia, R. & Paoloni, C., 28/04/2019, 2019 International Vacuum Electronics Conference (IVEC). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  360. Published

    Design of discrete-time RIDE control system.

    Ding, L., Bradshaw, A. & Taylor, C. J., 2006, Proceedings of the UKACC International Conference on Control.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  361. Published

    Design of helix applicators for microwave heating.

    Carter, R. G. & Wang, P., 1997, In: Journal of Microwave Power and Electromagnetic Energy. 32, 4, p. 199-204 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  362. Published

    Design of helix slow-wave structure for a high efficiency space TWT

    Srivastava, V., Ravinder, B., Sinha, A. K., Joshi, S. N. & Carter, R. G., 1/12/1998, In: ITG-Fachbericht. 150, p. 349-351 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  363. Published

    Design of helix slow-wave structures for high efficiency TWTs.

    Srivastava, V., Carter, R. G., Ravinder, B., Sinha, A. K. & Joshi, S. N., 12/2000, In: IEEE Transactions on Electron Devices. 47, 12, p. 2438-2443 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  364. Published

    Design of helix TWTs for optimum linearity

    Jenkins, R. O. & Carter, R. G., 1/01/2002, 7th IEEE High Frequency Postgraduate Student Colloquium, HFPSC 2002. Institute of Electrical and Electronics Engineers Inc., 7 p. 1088422. (IEEE High Frequency Postgraduate Student Colloquium; vol. 2002-January).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  365. Published

    Design of highly formable and strong titanium alloys through plasticity induced transformation

    Neelakantan, S., Rivera-Díaz-del-Castillo, P. E. J. & Van Der Zwaag, S., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. Vol. 1. p. 357-362 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  366. Published

    Design of high-performance power-distributed amplifier using Lange couplers

    DAGOSTINO, S. & PAOLONI, C., 12/1994, In: IEEE Transactions on Microwave Theory and Techniques. 42, 12, p. 2525-2530 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  367. Published

    Design of minimax-linear quadratic Gaussian controller using the frequency domain subspace identified model of flexible plate

    Ahmadizadeh, S., Montazeri, A. & Poshtan, J., 04/2015, In: Journal of Vibration and Control. 21, 6, p. 1115-1143 29 p.

    Research output: Contribution to journalJournal articlepeer-review

  368. Published

    Design of paired column semisubmersible hull

    Odijie, C., 2016, Lancaster University. 205 p.

    Research output: ThesisDoctoral Thesis

  369. Published

    Design of phase-veolcity tapers in coupled-cavity TWTS.

    Srivastava, V. & Carter, R. G., 10/1991, In: IEE Proceedings H (Microwaves, Antennas and Propagation) . 138, 5, p. 469-474 6 p.

    Research output: Contribution to journalJournal article

  370. Published

    Design of robust molecular electronic circuits.

    Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 2009, IEEE International Symposium on Circuits and Systems, 2009. ISCAS 2009.. Taiwan: IEEE, p. 1819-1822 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  371. Published

    Design of semiactive vehicle suspension controls in frequency domain

    Song, X. & Cao, D., 2009. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  372. Published

    Design of Slow Wave Structure for G-band TWT for High Data Rate Links

    Basu, R., Billa, L., Mahadev Rao, J., Letizia, R. & Paoloni, C., 28/04/2019, 2019 International Vacuum Electronics Conference (IVEC). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  373. Published

    Design of sub-THz traveling wave tubes for high data rate long range wireless links

    Basu, R., Billa, L. R., Letizia, R. & Paoloni, C., 30/10/2018, In: Semiconductor Science and Technology. 33, 12, 8 p., 124009.

    Research output: Contribution to journalJournal articlepeer-review

  374. Published

    Design of the beam delivery system for the international linear collider

    Seryi, A., Amann, J., Arnold, R., Asiri, F., Bane, K., Bellomo, P., Doyle, E., Fasso, A., Jonghoon, K., Keller, L., Ko, K., Li, Z., Markiewicz, T., Maruyama, T., Moffeit, K., Molloy, S., Nosochkov, Y., Phinney, N., Raubenheimer, T., Seletskiy, S. & 81 others, Smith, S., Spencer, C., Tenenbaum, P., Walz, D., White, G., Woodley, M., Woods, M., Xiao, L., Anerella, M., Jain, A., Marone, A., Parker, B., Delferriere, O., Napoly, O., Payet, J., Uriot, D., Watson, N., Agapov, I., Baldy, J. L., Schulte, D., Burt, G., Dexter, A., Buesser, K., Lohmann, W., Bellantoni, L., Drozhdin, A., Kashikhin, V., Kuchler, V., Lackowski, T., Mokhov, N., Nakao, N., Peterson, T., Ross, M., Striganov, S., Tompkins, J., Wendt, M., Yang, X., Enomoto, A., Kuroda, S., Okugi, T., Sanami, T., Suetsugu, Y., Tauchi, T., Del Carmen Alabau, M., Bambade, P., Brossard, J., Dadoun, O., Burrows, P., Christian, G., Clarke, C., Constance, B., Dabiri Khah, H., Hartin, A., Perry, C., Swinson, C., Ferrari, A., Blair, G., Boogert, S., Carter, J., Angal-Kalinin, D., Beard, C., Densham, C., Fernandez-Hernando, L., Greenhalgh, J., Goudket, P., Jackson, F., Jones, J., Kalinin, A., Ma, L., McIntosh, P., Yamamoto, H., Mattison, T., Carwardine, J., Saunders, C., Appleby, R., Torrence, E., Gronberg, J., Sanuki, T., Iwashita, Y., Telnov, V. & Warner, D., 1/12/2007, Proceedings of the IEEE Particle Accelerator Conference, PAC07. IEEE, p. 1985-1987 3 p. 4441135. (Proceedings of the IEEE Particle Accelerator Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  375. Published

    Design of the High Luminosity Large Hadron Collider Crab Cavity Support System

    Jones, T., 30/03/2020, Lancaster University. 102 p.

    Research output: ThesisMaster's Thesis

  376. Published

    Design of the ILC crab cavity system.

    Carter, R., Adolphsen, C., Beard, C., Bellantoni, L., Burt, G., Chase, B., Church, M., Dexter, A., Dykes, M., Edwards, H., Goudket, P., Jenkins, R., Jones, R. M., Kalinin, A., Khabiboulline, T., Ko, K., Latina, A., Li, Z., Ma, P., McIntosh, P. & 2 others, Ng, C. & Ser, I., 2006

    Research output: Other contribution

  377. Published

    Design of the pitch profile for high linearity helix TWT amplifiers.

    Jenkins, R. O. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  378. Published

    Design of titanium alloys showing plasticity induced transformation

    Neelakantan, S., Rivera-Díaz-del-Castillo, P. E. J. & Van Der Zwaag, S., 2010, THERMEC 2009 Supplement. Vol. 89-91. p. 405-410 6 p. (Advanced Materials Research; vol. 89-91).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  379. Published

    Design optimisation of multistage depressed collectors for high efficiency travelling wave tubes using genetic algorithm.

    Ghosh, T. K. & Carter, R. G., 04/2002, Proceedings of the 3rd IEEE international vacuum electronics conference, IVEC 2002. IEEE, p. 158-159 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  380. Published

    Design principles for mechatronic systems.

    Counsell, J. M., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 17-26 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  381. Published

    Design procedure for monolithic matrix amplifier

    Paoloni, C. & DAgostino, S., 01/1997, In: IEEE Transactions on Microwave Theory and Techniques. 45, 1, p. 135-139 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  382. Published

    Design procedure for THz cascade backward wave amplifiers

    Mineo, M., Paoloni, C. & Durand, A. J., 04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International. USA: IEEE, p. 235-236 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  383. Published

    Design Study of a High-Power Ka-Band High-Order-Mode Multibeam Klystron

    Cai, J., Syratchev, I. & Burt, G., 1/12/2020, In: IEEE Transactions on Electron Devices. 67, 12, p. 5736 - 5742 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  384. Published

    Design Study of Corrugated Waveguide Slow-Wave Structure for THz Amplification

    Mineo, M. & Paoloni, C., 2009, 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 104-105 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  385. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  386. Published

    Design, innovation and a new age for filtration

    Burns, N., Geekie, L., Travis, D., Burns, M. & Rennie, A., 06/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  387. Published

    Design, Optimization and Numerical Modelling of A Novel Floating Pendulum Wave Energy Converter with Tide Adaptation

    Yang, J., Zhang, D., Chen, Y., Liang, H., Tan, M., Li, W. & Ma, X., 10/2017, In: China Ocean Engineering. 31, 5, p. 578–588 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  388. Published

    Design, specifications, and first beam measurements of the compact linear accelerator for research and applications front end

    Angal-Kalinin, D., Bainbridge, A., Brynes, A. D., Buckley, R. K., Buckley, S. R., Burt, G. C., Cash, R. J., Castaneda Cortes, H. M., Christie, D., Clarke, J. A., Clarke, R., Cowie, L. S., Corlett, P. A., Cox, G., Dumbell, K. D., Dunning, D. J., Fell, B. D., Gleave, K., Goudket, P., Goulden, A. R. & 47 others, Griffiths, S. A., Hancock, M. D., Hannah, A., Hartnett, T., Heath, P. W., Henderson, J. R., Hill, C., Hindley, P., Hodgkinson, C., Hornickel, P., Jackson, F., Jones, J. K., Jones, T. J., Joshi, N., King, M., Kinder, S. H., Knowles, N. J., Kockelbergh, H., Marinov, K., Mathisen, S. L., McKenzie, J. W., Middleman, K. J., Militsyn, B. L., Moss, A., Muratori, B. D., Noakes, T. C. Q., Okell, W., Oates, A., Pacey, T. H., Paramanov, V. V., Roper, M. D., Saveliev, Y., Scott, D. J., Shepherd, B. J. A., Smith, R. J., Smith, W., Snedden, E. W., Thompson, N. R., Tollervey, C., Valizadeh, R., Vick, A., Walsh, D. A., Weston, T., Wheelhouse, A. E., Williams, P. H., Wilson, J. T. G. & Wolski, A., 1/04/2020, In: Physical Review Accelerators and Beams. 23, 4, 37 p., 044801.

    Research output: Contribution to journalJournal articlepeer-review

  389. Published

    Design-for-test (DfT) study on a current mode DAC

    Olbrich, T., Mozuelos, R., Richardson, A. & Bracho, S., 12/1996, In: IEE Proceedings - Circuits, Devices and Systems. 143, 6, p. 374-379 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  390. Published

    Design-for-test strategies for analogue and mixed-signal integrated circuits

    Olbrich, T., Liberali, V., Maloberti, F. & Richardson, A., 1996, 38TH MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, PROCEEDINGS, VOLS 1 AND 2. Caloba, LP., Diniz, PSR., deQueiroz, ACM. & Watanabe, EH. (eds.). NEW YORK: Eubios Ethics Institute, p. 1139-1144 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  391. Published

    Design-for-test structure to facilitate test vector application with low performance loss in non-test mode.

    Bratt, A., Harvey, R. J. A., Dorey, A. P. & Richardson, A. M. D., 1993, In: Electronics Letters. 29, 16, p. 1438-1440 3 p.

    Research output: Contribution to journalJournal article

  392. Published

    Design-for-testability for mixed signal and analogue design.

    Richardson, A. M. D. & Lechner, A., 2000, Proceedings of 7th international conference on mixed design of integrated circuits and systems. Poland

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  393. Published

    Designing a robot excavator - the decision making process.

    Seward, D. W., 1992, Mechatronics case studies. Mechatronics case studies

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  394. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  395. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A. E. W., 03/2016, In: Chemical Engineering and Technology. 39, 3, p. 535-542 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  396. Published

    Designing and building a RF receiver coil for wrist imaging at 7T

    S. Farhat, D. Lee, P. Gowland, P. Glover, 2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  397. Published

    Designing Digital Materials with Volumetric Gradients

    Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  398. Published

    Designing effective solid catalysts for biomass conversion: Aerobic oxidation of ethyl lactate to ethyl pyruvate

    Zhang, W., Ensing, B., Raveendran, S. & Rothenberg, G., 9/02/2018, In: Green Chemistry. 20, 8, p. 1866-1873 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  399. Published

    Designing high entropy alloys employing thermodynamics and Gaussian process statistical analysis

    Tancret, F., Toda-Caraballo, I., Menou, E. & Rivera Díaz-Del-Castillo, P. E. J., 5/02/2017, In: Materials and Design. 115, p. 486-497 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  400. Published

    Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics

    Xu, W., Rivera-Díaz-del-Castillo, P. E. J. & van der Zwaag, S., 12/2008, In: Computational Materials Science. 44, 2, p. 678-689 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  401. Published

    Designing reliable digital molecular electronic circuits.

    Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 2009, Nano-Net 4th International ICST Conference, Nano-Net 2009, Lucerne, Switzerland, October 18-20, 2009. Proceedings. Schmid, A., Goel, S., Wang, W., Beiu, V. & Carrara, S. (eds.). Berlin: Springer, p. 111-115 5 p. (Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  402. Published

    Designing the four rod crab cavity for the high-luminosity LHC upgrade

    Hall, B., 2012, Lancaster University. 222 p.

    Research output: ThesisDoctoral Thesis

  403. Published

    Designing thickeners by matching hindered settling and gelled suspension zones in the presence of aggregate densification

    Zhang, Y., Grassia, P., Martin, A., Usher, S. P. & Scales, P. J., 29/09/2015, In: Chemical Engineering Science. 134, p. 297-307 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  404. Published

    Detailed Geant4 simulations of the ANITA and ANITA-CUP neutron facilities

    Hong, Q., Platt, S. P., Prokofiev, A. V. & Passoth, E., 24/12/2015, 2015 15th European Conference on Radiation and Its Effects on Components and Systems, RADECS 2015. Institute of Electrical and Electronics Engineers Inc., 4 p. 7365599. (Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS; vol. 2015-December).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  405. Published

    Detecting energy dependent neutron capture distributions in a liquid scintillator

    Balmer, M., Gamage, K. & Taylor, G., 11/03/2015, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 776, p. 1-7 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  406. Published

    Detection of explosive substances by tomographic inspection using neutron and gamma-ray spectroscopy.

    Farahmand, M., Boston, A. J., Grint, A. N., Nolan, P. J., Joyce, M. J., Mackin, R. O., D’Mellow, B., Aspinall, M., Peyton, A. J. & Silfhout, R. V., 04/2007, In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 261, 1-2, p. 396-400 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  407. Published

    Detection of phase transformation during steel processing using EM sensors.

    Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of the 1st international seminar in progress in innovative manufacturing engineering (PRIME).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  408. Published

    Detection of phase transformation in hot strip steel samples using a multi-frequency electromagnetic impedance measuring node.

    Binns, R., Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 11th conference on sensors and their applications. p. 45-50 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  409. Published

    Detection of simulated fukushima daichii fuel debris using a remotely operated vehicle at the naraha test facility

    Nancekievill, M., Espinosa, J., Watson, S., Lennox, B., Jones, A., Joyce, M. J., Katakura, J-I., Okumura, K., Kamada, S., Katoh, M. & Nishimura, K., 22/10/2019, In: Sensors. 19, 20, 16 p., 4602.

    Research output: Contribution to journalJournal articlepeer-review

  410. Published

    Detector systems

    Lionheart, W., Ma, X. & Peyton, A., 21/03/2018, Patent No. European EP2108132B1

    Research output: Patent

  411. Published

    Detector systems

    Lionheart, W., Peyton, A. & Ma, X., 23/10/2018, Patent No. US10107783B2

    Research output: Patent

  412. Published

    Detector systems

    Lionheart, W., Peyton, A. & Ma, X., 25/07/2017, Patent No. US9714920B2

    Research output: Patent

  413. Published

    Determination of bonding in amorphous carbons by electron energy loss spectroscopy, Raman scattering and X-ray reflectivity

    Ferrari, A. C., Kleinsorge, B., Adamopoulos, G., Robertson, J., Milne, W. I., Stolojan, V., Brown, L. M., LiBassi, A. & Tanner, B. K., 2000, In: Journal of Non-Crystalline Solids. 266-269, p. 765-768 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  414. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  415. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  416. Published

    Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

    Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  417. Published

    Determination of jet calibration and energy resolution in proton–proton collisions at √s=8TeV using the ATLAS detector

    Collaboration, ATLAS., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Sanderswood, I., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M., Whitmore, B. W. & Yexley, M., 1/12/2020, In: European Physical Journal C: Particles and Fields. 80, 12, 81 p., 1104.

    Research output: Contribution to journalJournal articlepeer-review

  418. Published

    Determination of optimum welding parameters for the welding execution of steels used in underwater marine systems (including the submerged parts of Wave Energy Converters)

    Oikonomou, A. & Aggidis, G., 1/09/2019, In: Materials Today: Proceedings. 18, 2, p. 455-461 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  419. Unpublished

    Determination of riometer quiet day curves and removal of solar radio emissions

    Marple, S. R. & Honary, F., 08/2004, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  420. Published

    Determination of sever positions in coupled-cavity TWTS

    Srivastava, V. & Carter, R. G., 02/1991, In: IEE Proceedings H (Microwaves, Antennas and Propagation) . 138, 1, p. 55-60 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  421. Published

    Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid

    Andrieux, F., Boxall, C. & Taylor, R., 01/2011, Applications of Thermodynamics to Biological and Materials Science. Mizutani, T. (ed.). Rijeka, Croatia: InTech, p. 441-458 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  422. Published

    Determination of the corrosion resistance of the welded steels used in underwater marine systems (including the submerged parts of Wave Energy Converters)

    Oikonomou, A. & Aggidis, G., 31/05/2021, In: Materials Today: Proceedings. 44, 7, p. 5048-5073 26 p.

    Research output: Contribution to journalJournal articlepeer-review

  423. Published

    Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis

    Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  424. Published

    Determination of the Failure Susceptibility of a Flat Die used in Biomass Pelletizing Machines by means of FEA based Design Exploration

    Celik, H. K., Yilmaz, H., Rennie, A. E. W., Cinar, R. & Firat, M. Z., 10/2018, In: Journal of Failure Analysis and Prevention. 18, 5, p. 1099-1110 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  425. Published

    Determination of the interaction impedance of helix slow-wave structures.

    Carter, R. G., 05/2000, International Vacuum Electronics Conference. California: IEEE, p. 2-2 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  426. Published

    Determination of Time Dependent Stress Distribution on a Potato Tuber during Drop Case

    Caglayan, N., Oral, O., Celik, H. K., Cinar, R., Rodrigues, L. C. D. A., Rennie, A. E. W. & Akinci, I., 11/2018, In: Journal of Food Process Engineering. 41, 7, 7 p., e12869.

    Research output: Contribution to journalJournal articlepeer-review

  427. Published

    Determination of Time Dependent Stress Distribution on Potato Tubers at Mechanical Collision

    Celik, H. K., Cinar, R., Rennie, A. E. W., Ulmeanu, M-E. & Akinci, I., 04/2018, CIGR 2018: XIX World Congress of CIGR: "Sustainable Life for Children". Akinci, I., Aykas, E. & Güngör, Ö. (eds.). Antalya, Turkey, p. 123 1 p. OP-081 [Section VI: Bioprocesses]

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNAbstract

  428. Published

    Determination of water content in dehydrated mammalian cells using terahertz pulsed imaging: a feasibility study

    Chau, D. Y. S., Dennis, A. R., Lin, H., Zeitler, J. A. & Tunnacliffe, A., 2016, In: Current Pharmaceutical Biotechnology. 17, 2, p. 200-207 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  429. Published

    Deuterium Isotope Separation by Combined Electrolysis Fuel Cell

    Ogawa, R., Tanii, R., Dawson, R., Matsushima, H. & Ueda, M., 15/04/2018, In: Energy. 149, p. 98-104 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  430. Published

    Developing a control system for improving selective polymer laser sintering build speed and part integrity

    Taylor, J., 6/02/2020, Lancaster University. 158 p.

    Research output: ThesisMaster's Thesis

  431. Published

    Developing A Synthetic Composite Membrane For Cleft Palate Repair

    Sharif, F., Roman, S., Asif, A., Gigliobianco, G., Ghafoor, S., Tariq, M., Siddiqui, S. A., Mahmood, F., Muhammad, N., Rehman, I. U. & MacNeil, S., 1/07/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 7, p. 1178-1189 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  432. Published

    Developing an IIR Robust Adaptive Algorithm in the Modified Filtered-x RLS Form for Active Noise and Vibration Control Systems

    Montazeri, A. & Reger, J., 2011, Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on. New York: IEEE, p. 7994-7999 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  433. Published

    Developing bearing steels combining hydrogen resistance and improved hardness

    Szost, B. A., Vegter, R. H. & Rivera-Díaz-del-Castillo, P. E. J., 2013, In: Materials and Design. 43, p. 499-506 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  434. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  435. Published

    Developing real-time autonomous excavation - the LUCIE story.

    Bradley, D. A. & Seward, D. W., 1995, Developing real-time autonomous excavation - the LUCIE story. New Orleans, p. 3028-3033 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  436. Unpublished

    Developing the Northwest of England Hydro Resource Model (Invited keynote presentation)

    Aggidis, G. A., 10/01/2008, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  437. Published

    Developing the safety case for large mobile robots.

    Seward, D. W., Quayle, S., Sommerville, I. & Morey, R., 1997, Advances in safety and reliability : proceedings of the ESREL '97 International Conference on Safety and Reliability, 17 - 20 June 1997, Lisbon, Portugal. Soares, C. G. (ed.). Oxford: Pergamon, p. 2293-2300 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  438. Published

    Development and application of a neutron sensor for single event effects analysis

    Platt, S. P., Cassels, B. & Torok, Z., 1/01/2005, In: Journal of Physics: Conference Series. 15, 1, p. 172-176 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  439. Unpublished

    Development and characterisation of novel structural composites from recycled materials

    Sotayo, A., 2016, (Unpublished) Lancaster University. 263 p.

    Research output: ThesisDoctoral Thesis

  440. Published

    Development and characterization of novel polyurethane films impregnated with tolfenamic acid for therapeutic applications

    Istanbullu, H., Ahmed, S., Sheraz, M. A. & Rehman, I. U., 2013, In: Biomed Research International. 2013, 8 p., 178973.

    Research output: Contribution to journalJournal articlepeer-review

  441. Published

    Development in electromagnetic tomography for industrial applications.

    Lyon, G. M., Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the progress in electromagnetics research symposium: PIERS. Hong Kong

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  442. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  443. Published

    Development of a D-band Traveling Wave Tube for high data rate wireless links

    Basu, R., Mahadev Rao, J., Quang, T. L., Letizia, R. & Paoloni, C., 30/09/2021, In: IEEE Transactions on Electron Devices. 68, 9, p. 4675-4680 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  444. Published

    Development of a dewaxing protocol for tissue-engineered models of the oral mucosa used for Raman spectroscopic analysis

    Mian, S. A., Colley, H. E., Thornhill, M. H. & Rehman, I. U., 2014, In: APPLIED SPECTROSCOPY REVIEWS. 49, 8, p. 614-617 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  445. Published

    Development of a diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) cell for the in situ analysis of co-electrolysis in a solid oxide cell

    Cumming, D., Tumilson, C., Taylor, R., Chansai, S., Call, A., Jacquemin, J., Hardacre, C. & Elder, R., 12/03/2015, In: Faraday Discussions. 182, 97, p. 97-111 15 p., 182.

    Research output: Contribution to journalJournal articlepeer-review

  446. Published

    Development of a directional neutron survey meter

    Balmer, M., Gamage, K. & Taylor, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  447. Published

    Development of a fast electromagnetic induction tomography system for metal process applications.

    Ma, X., Higson, S. R., Lyons, A. & Peyton, A. J., 09/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  448. Published

    Development of a grow-cell test facility for research into sustainable controlled-environment agriculture

    Tsitsimpelis, I., Wolfenden, I. & Taylor, C. J., 10/2016, In: Biosystems Engineering. 150, p. 40-53 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  449. Published

    Development of a linear array for intracavatary in vivo dosimetry during external beam radiotherapy and brachytherapy.

    Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2003, Proceedings of the nuclear science symposium, medical imaging conference: 13th international workshop on room temperature semiconductor X- and gamma-ray detectors.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  450. Published

    Development of a linear array for intracavitary in vivo dosimetry during external beam radiotherapy and brachytherapy.

    Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2004, In: IEEE Transactions on Nuclear Science. 51, 4, p. 1420-1426 7 p., 8076167 .

    Research output: Contribution to journalJournal articlepeer-review

  451. Published

    Development of a liquid scintillator–based active interrogation system for LEU fuel assemblies

    Lavietes, A., Plentada, R., Mascarenhas, N., Cronholm, L. M., Aspinall, M., Joyce, M., Tomanin, A. & Peerani, P., 2013, Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on. Piscataway, N.J.: IEEE, p. 1-4 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  452. Published

    Development of a Mixed Field Analyser for Real-Time Scintillator-Based Fast Neutron Measurements

    Joyce, M., Aspinall, M. & Cave, F., 12/2012, UK A01887 ed. UK: Department for Energy and Climate Change. 30 p.

    Research output: Book/Report/ProceedingsCommissioned report

  453. Published

    Development of a modular data acquisition system for electrical tomography.

    Lyon, G. M. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  454. Published

    Development of a Motion Tracking 3D CAD Input System

    Abram, T., Benachour, P. & Vuong, T., 12/06/2009, p. 109-116. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  455. Published

    Development of a multi frequency impedance measurement system for use in MEMS flow cytometers

    Richardson, A. M. D., Cole, N. & Abdul‑Hafiz, A., 12/2017, In: Microsystem Technologies. 23, 12, p. 5527-5543 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  456. Published
  457. Published

    Development of a portable isotropic neutron spectrometer

    Selwood, M. J. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1145-1149 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  458. Published

    Development of a Radiological Characterization Submersible ROV for Use at Fukushima Daiichi

    Nancekievill, M., Jones, A. R., Joyce, M. J., Lennox, B., Watson, S., Katakura, J., Okumura, K., Kamada, S., Katoh, M. & Nishimura, K., 1/09/2018, In: IEEE Transactions on Nuclear Science. 65, 9, p. 2565-2572 8 p., 8417432.

    Research output: Contribution to journalJournal articlepeer-review

  459. Published

    Development of a remote access facility for a PLL test course.

    Grout, I., Murphy, J., Burbidge, M., Bell, G. & Manners, A., 2005, Proceedings of the remote experimentation and virtual instrumentation symposium.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  460. Published

    Development of a remote access facility for a PLL test course.

    Grout, I., Murphy, J., Burbidge, M., Bell, G. & Manners, A., 2005, In: International Journal of Online Engineering. 1, 2

    Research output: Contribution to journalJournal article

  461. Published

    Development of a safety manager for an autonomous mobile robot.

    Pace, C. & Seward, D., 1998, Proceedings of the 29th international symposium on robotics 1998: advanced robotics beyond 2000. Birmingham, p. 277-282 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  462. Published

    Development of a sensor for visualisation of steel flow in the continuous casting nozzle

    Higson, S. R., Drake, P., Stamp, D. W., Peyton, A. J., Binns, R., Lyons, A. & Lionheart, W. R. B., 06/2003, In: Revue de Metallurgie-Cahiers d'Informations Techniques. 2003, 6, p. 629-632 4 p.

    Research output: Contribution to journalJournal article

  463. Published

    Development of a sensor for visualisation of steel flow in the continuous casting nozzle

    Higson, S. R., Drake, P., Stamp, D. W., Peyton, A. J., Binns, R., Lyons, A. & Lionheart, W. R. B., 2002, Proceedings of the 21st international ATS steelmaking conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  464. Published

    Development of a UHF transponder for geological monitoring of boreholes drilled through ice sheets using phase-sensitive FMCW radar

    Amiri, A., Brennan, P. V. & Lok, L. B., 4/10/2017, 2017 IEEE MTT-S International Microwave Symposium, IMS 2017. Institute of Electrical and Electronics Engineers Inc., p. 1746-1749 4 p. 8058982

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  465. Published

    Development of a virtual instrument system for industrial process tomography.

    Deloughry, R., Davenport, I., Ma, X. & Ponnapalli, P. V. S., 09/2003. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  466. Published

    Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products

    Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  467. Published

    Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

    Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  468. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  469. Published

    Development of an assisted-teleoperation system for a dual-manipulator nuclear decommissioning robot

    West, C., 2019, Lancaster University. 333 p.

    Research output: ThesisDoctoral Thesis

  470. Published

    Development of an automated verticality alignment system for a vibro-lance

    Taylor, C. J., Shaban, E. M., Chotai, A. & Ako, S., 2006, Proceedings of the 7th Portuguese conference on automatic control (Controlo-07).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  471. Published

    Development of an automated verticality alignment system for a vibro-lance

    Shaban, E. M., Ako, S., Taylor, C. J. & Seward, D. W., 07/2008, In: Automation in Construction. 17, 5, p. 645-655 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  472. Published

    Development of an eddy current system for monitoring taphole operations.

    Coveney, J. A., Peyton, A. J., Kyllo, A. K., Pham, M. H. & Gray, N. B., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 377-383 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  473. Published

    Development of an efficient future energy storage system incorporating fluidized bed of micro-particles: English

    Adelusi, I. A., 2020, Lancaster University. 314 p.

    Research output: ThesisDoctoral Thesis

  474. Published

    Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students

    Lambert, C. & Rennie, A., 09/2013, Proceedings of The 30th International Manufacturing Conference: Professional Development of Engineers for Advanced Manufacturing. Dublin, Ireland, p. 473-482 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  475. Published

    Development of an Optimized Converter Layer for a Silicon-Carbide-Based Neutron Sensor for the Detection of Fissionable Materials

    Monk, S., Platt, S., Cheneler, D., Anderson, M. & Alhamdi, M., 26/10/2019, 2019 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2019. IEEE, 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  476. Published

    Development of an optimized converter layer for silicon carbide based neutron sensor for the detection of fissionable materials

    Monk, S., Platt, S., Anderson, M. & Cheneler, D., 10/2019, p. 1-2. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  477. Unpublished

    Development of Bioactive Composites for Maxillofacial (Orbital Floor) Fracture Repair and Regeneration

    Alhamoudi, F., 2021, (Unpublished) Lancaster University. 351 p.

    Research output: ThesisDoctoral Thesis

  478. Published

    Development of circuits and system models for the synchronization of the ILC crab cavities.

    Burt, G., Carter, R. G., Dexter, A., Jenkins, R., Tahir, I., Beard, C., Goudket, P., Kalinin, A., Ma, L. & McIntosh, P., 2007, p. 3971-3973. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  479. Published

    Development of class 1 QTAG monitor.

    Bratt, A., Baker, K., Richardson, A. M. D. & Welbers, A., 1994, Proceedings of an international test conference: the next 25 years. IEEE Service Centre

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  480. Published

    Development of collagen/PVA composites patches for osteochondral defects using a green processing of ionic liquid

    Iqbal, B., Muhammad, N., Rahim, A., Iqbal, F., Sharif, F., Safi, S. Z., Khan, A. S., Gonfa, G., Uroos, M. & Rehman, I. U., 1/05/2019, In: International Journal of Polymeric Materials and Polymeric Biomaterials. 68, 10, p. 590-596 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  481. Published

    Development of communication simulation software for TMS32010 multi-processor parallel system

    Ma, X. & Wu, J., 1991, In: Industrial Control Computer. p. 37-39 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  482. Published

    Development of database for checking fixtures for automotive parts

    Abdullah, Z., Imran, S., Amran, M., Hasib, H., Muhammad, N. S. & Jaafar, R., 2015, In: Applied Mechanics and Materials. 761, p. 37-41 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  483. Published

    Development of Diamond Composite Electrode for Anodic Oxidation of Organic Pollutants

    Ajeel, M. A., Hassan, T. A. A., Naje, A. S. & Aroua, M. K. T., 08/2018, In: Journal of Environmental Chemical Engineering. 6, 4, p. 3884-3888 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  484. Published

    Development of dynamic model of a 7DOF hydraulically actuated tele-operated robot for decommissioning applications

    Montazeri, A. & Ekotuyo, J. U., 6/07/2016, American Control Conference (ACC), 2016. IEEE, p. 1209-1214 6 p. (American Control Conference (ACC), 2016).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  485. Published

    Development of electromagnetic inductance tomography (EMT) hardware for determining human body composition.

    Goss, D., Mackin, R. O., Crescenzo, E., Tapp, H. S. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 828-833 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  486. Published

    Development of electromagnetic tomography (EMT) for industrial applications: part 1: sensor design and instrumentation

    Peyton, A. J., Borges, A. R., Oliveira, E., Lyon, G. M. & Yu, Z. Z., 1999, Proceedings of the world congress on industrial process tomography. Buxton

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  487. Published

    Development of fusion blanket technology for the DEMO reactor

    Colling, B. R. & Monk, S. D., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1370-1372 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  488. Published

    Development of high-resolution real-time sub-ppb ethane spectroscopy and some pilot studies in life science.

    Skeldon, K. D., Gibson, G. M., Wyse, C. A., McMillan, L. C., Monk, S. D., Longbottom, C. & Padgett, M. J., 08/2005, In: Applied Optics. 44, 22, p. 4712-4721 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  489. Published

    Development of hydro impulse turbines and new opportunities

    Zidonis, A., Benzon, D. & Aggidis, G., 11/2015, In: Renewable and Sustainable Energy Reviews. 51, p. 1624–1635 12 p., RSER4610.

    Research output: Contribution to journalJournal articlepeer-review

  490. Published

    Development of K-doped ZnO nanoparticles encapsulated crosslinked chitosan based new membranes to stimulate angiogenesis in tissue engineered skin grafts

    Shahzadi, L., Chaudhry, A. A., Aleem, A. R., Malik, M. H., Ijaz, K., Akhtar, H., Alvi, F., Khan, A. F., Rehman, I. U. & Yar, M., 1/12/2018, In: International Journal of Biological Macromolecules. 120, p. 721-728 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  491. Published

    Development of metal matrix composites by direct energy deposition of ‘satellited’ powders

    Farayibi, P. K., Abioye, T. E., Kennedy, A. & Clare, A. T., 1/09/2019, In: Journal of Manufacturing Processes. 45, p. 429-437 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  492. Published

    Development of Multi-Oscillating Water Columns as Wave Energy Converters

    Doyle, S. & Aggidis, G. A., 1/06/2019, In: Renewable and Sustainable Energy Reviews. 107, p. 75-86 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  493. Published

    Development of multiple frequency electromagnetic induction systems for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P., 24/07/2008, In: Measurement Science and Technology. 19, 9, 10 p., 094008.

    Research output: Contribution to journalJournal articlepeer-review

  494. Published

    Development of Novel Multi-Material Adhesive Joints

    Yousefi Kanani, A., 1/03/2021, Lancaster University. 190 p.

    Research output: ThesisDoctoral Thesis

  495. Published

    Development of reciprocating test-rig for wave and tidal power at new and renewable energy centre.

    Baker, N. J., Mueller, M. A. & Taverner, P. J., 2004, Proceedings of the 3rd international conference on marine renewable energy (IMarEST). p. 223-239 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  496. Published

    Development of ROV system to explore fuel debris in the Fukushima Daiichi Nuclear Power Plant

    Kamada, S., Katoh, M., Nishimura, K., Nancekievill, M., Watson, S., Lennox, B., Jones, A. R., Joyce, M. J., Okumura, K. & Katakura, J., 1/01/2019, In: Progress in Nuclear Science and Technology. 6, p. 199-202 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  497. Published

    Development of scintillator based coded-aperture neutron imager for nuclear decommissioning

    Cieslak, M., 4/10/2019, Lancaster University. 232 p.

    Research output: ThesisDoctoral Thesis

  498. Published

    Development of sensor arrays for electromagnetic tomography.

    Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  499. Published

    Development of sensor arrays for electromagnetic tomography: compensation of large background signal values.

    Yu, Z. Z. & Peyton, A. J., 1998, In: Transactions of the Institute of Measurement and Control. 20, 4, p. 195-202 8 p.

    Research output: Contribution to journalJournal article

  500. Published

    Development of the nSpect portable neutron spectrometer

    D'Mellow, B., Joyce, M. J. & Jarrah, A., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Back to top