School of Engineering

View graph of relations

Faculty of Science and Technology

Show 7 centres, groups and clusters

Hide 7 centres, groups and clusters

351 - 400 out of 6,110Page size: 50

RSS feed of this list

Sort by: Type

Chapter
Published
Frame connections.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Plate-to-plate mechanical: part II: testing and applications.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A knowledge based mechatronics approach to controller design.
Bradshaw, A. & Counsell, J. M., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1723-1727 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder mechatronics: design principles for controller design
Counsell, J. M. & Porter, I., 1998, Proceedings of ICAM ’98. Okayama, Japan
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder mechatronics for flight control systems
Counsell, J. M. & Porter, I., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 197-206 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Schemebuilder: CACD for mechanism motion control.
Counsell, J. M., Porter, I. & Duffy, M., 1998, Proceedings of a workshop on power transmission and motion control. University of Bath
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developments in the piling process through advances in technology
Findlay, J. D., Seward, D. W., Mure, J. N. & Scott, J., 1998, The value of geotechnics in construction. London: Institution of Civil Engineers, 359 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Non-linear controller design for a highly coupled VSTOL aircraft.
Bennett, D., Burge, S. E. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1510-1515 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Multi-diagnostic observations of heater-induced effects at pump frequencies close to the electron gyroharmonics.
Honary, F., Stocker, A. J., Robinson, T. R., Rietveld, M. T. & McCrea, I. W., 1997, Proceedings of the 8th EISCAT international workshop. Leicester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Magnetron frequency twinning.
Carter, R. G., Ball, E. M. & Brady, M. B., 1997, Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. The Netherlands: ESTEC, p. 127
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Equivalent circuit modelling of helix slow-wave structures.
Carter, R. G. & Wang, P., 1997, Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. The Netherlands: ESTEC, p. 127
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Design principles for mechatronic systems.
Counsell, J. M., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 17-26 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computational agent to integrate expert system and simulation language.
da Silva, J. C., Bennett, D. & Counsell, J. M., 1997, Proceedings of the 9th European simulation symposium. Germany
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computer support environment applying object-oriented methods for hydraulic systems design.
da Silva, J. C. & Cheung, H. F., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 117-131 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Validation and certification of civil engineering structural design software.
Dickinson, S. J. & Bradshaw, A., 1997, Proceedings of the worldwide ECCE symposium: computers in the practice of building and civil engineering. Finland
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Multi-instrument case studies of arc dynamics and substorm effects.
Gazey, N. G. J., del Pozo, C. F., Williams, P. J. S., Sedgemore, K. J. F., Honary, F. & Smith, P. N., 1997, Proceedings of the 8th EISCAT international workshop. Leicester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developing the safety case for large mobile robots.
Seward, D. W., Quayle, S., Sommerville, I. & Morey, R., 1997, Advances in safety and reliability : proceedings of the ESREL '97 International Conference on Safety and Reliability, 17 - 20 June 1997, Lisbon, Portugal. Soares, C. G. (ed.). Oxford: Pergamon, p. 2293-2300 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Safe systems architectures for autonomous robots.
Sommerville, I., Seward, D. W., Morey, R. & Quayle, S., 1997, Proceedings of the safety critical systems conference. Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A new methodology for IC product quality estimation.
Olbrich, T., Grout, I., Eben Aimine, Y., Richardson, A. & Contensou, J., 1997, Proceedings of the European design and test conference (ED&TC '97). Paris: IEEE Computer Society Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An HF magnetospheric radar for EISCAT
Rietveld, M. T., Honary, F., Robinson, T. R., Thide, B. & Stubbee, P., 1997, Proceedings of the 8th EISCAT international workshop. Leicester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The development of an interactive simulation of site information technology systems in relation to construction automation.
Scott, J., Bradley, D. A., Seward, D. W., Adelson, R. M. & Pengelly, M., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 154-165 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of a modular data acquisition system for electrical tomography.
Lyon, G. M. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development in electromagnetic tomography for industrial applications.
Lyon, G. M., Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the progress in electromagnetics research symposium: PIERS. Hong Kong
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Navigation system design for an individual excavator robot.
Yavuz, H., Bradshaw, A. & Dogantan, Z. S., 1997, Proceedings of Mamkon '97. Istanbul, p. 489-495 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of sensor arrays for electromagnetic tomography.
Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The simulation and modelling of safety systems for construction robots.
Zhang, L., Bradley, D. A. & Seward, D. W., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 224-229 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Trellis decoding of Reed-Solomon codes: a practical approach
Honary, B., Markarian, G. & Marple, S. R., 1997, Communications coding and signal processing: third volume on communication theory and applications. Honary, B., Darnell, M. & Farrell, P. (eds.). Taunton: Research Studies Press Ltd., p. 133-147 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
3-D simulation of a soft-landing tilted electric field collector for linear beam tubes.
Kumar, L. & Carter, R. G., 12/1996, Proceedings of the Asia-Pacific microwave conference. New Delhi
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Developments in electromagnetic tomography instrumentation.
Lyon, G., Peyton, A. J., Yu, Z. Z. & Beck, M. S., 06/1996, IEE Colloguium on Advances in electrical Tomography (Digest No: 1196/143). London: IEEE, p. 12/1-12/4
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
LUCIE the robot excavator - design for system safety.
Seward, D. W., Margrave, F. W., Sommerville, I. & Morrey, R., 04/1996, Proceedings of the 1996 IEEE international conference on robotics and automation. Minneapolis: IEEE, Vol. 1. p. 936-968 33 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
System architectures and safety for mobile construction robots.
Seward, D. W. & Quayle, S., 1996, Proceedings of the 13th international symposium on robotics in construction. Tokyo, Japan: Japan Robot Association (JARA), p. 727-732 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The automation of piling rig positioning using satellite GPS.
Seward, D. W., Ward, J., Findlay, J. & Kinniburgh, H., 1996, Proceedings of the 13th international symposium on robotics in construction. Tokyo, Japan: Japan Robot Association (JARA), p. 223-230 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Precise on-site positioning of a piling rig.
Seward, D. W., Ward, J., Findlay, J. & Kinniburgh, H., 1996, Proceedings of the Trimble 1996 surveying and mapping conference. California, p. 183-189 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
On development of a transputer based robot control system.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the 5th international workshop on robotics in Alpe-Adria-Danube region. Rudas, I. J. (ed.). Budapest: Hungarian Robotics Association, p. 125-130 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A flexible real-time transputer based control system.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the 5th UK mechatronics forum international conference. Portugal
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A flexible, transputer based robot control.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the international workshop on advanced robotics and intelligent machines. Manchester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A transputer based, flexible, real-time control system for robotic manipulators.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the UK UKACC international conference on control '96. Exeter
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Defect-oriented vs. chematic-level based fault simulation for mixed-signal ICs.
Olbrich, T., Perez, J., Grout, I., Richardson, A. & Ferrer, C., 1996, Proceedings of the international test conference 1996. Washington DC, p. 511-520 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An infrared sensor for an electric wheelchair obstacle avoidance system.
Brown, M. W., Burge, S. E. & Bradley, D. A., 1996, Proceedings of the 5th mechatronics forum international conference. Portugal, p. 35-40 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Action-centred learning in industry.
Carter, R. G., Cooke, F. & Neal, R., 1996, Management of independent learning. Knight, P. & Tait, J. (eds.). Routledge, 164 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Modelling of an integrated supermarket refrigeration and heating system using natural refrigerants.
Castle, T. & Anderson, D. C., 1996, Proceedings of the 6th international refrigeration conference. Indiana
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The systematic design of economic wave energy converters.
French, M. J. & Bracewell, R. H., 1996, Proceedings of the 6th international offshore and polar engineering conference (ISOPE). International Society of Offshore and Polar Engineers, p. 106-109 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Identification and control of a novel hybrid microwave and radiant furnace.
Holland, I. & Bradshaw, I., 1996, Proceedings of the 5th UK mechatronics forum international conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Previous 1...4 5 6 7 8 9 10 11 ...123 Next

Research

School of Engineering

Quick Links

Connect With Us