Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. 2021
  2. Published

    A 0.35 THz Extended Interaction Oscillator based on Overmoded and Bi-Periodic Structure

    Xu, C., Meng, L., Paoloni, C., Qin, Y., Bin, L., Wang, B., Li, H. & Yin, Y., 30/11/2021, In: IEEE Transactions on Electron Devices. 68, 11, p. 5814-5819 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  3. Published

    Application of Spectral Kurtosis on vibration signals for the detection of cavitation in centrifugal pumps

    Mousmoulis, G., Yiakopoulos, C., Aggidis, G., Antoniadis, I. & Anagnostopoulos, I., 30/11/2021, In: Applied Acoustics. 182, 17 p., 108289 .

    Research output: Contribution to journalJournal articlepeer-review

  4. Published

    Axial-Load Resistance of a Novel UHPFRC Grouted SHS Tube-Sleeve Connection: Experimental, Numerical, and Theoretical Approaches

    Huang, Z., Zhang, W., Fan, S., Sui, L. & Ye, J., 30/11/2021, In: Journal of Structural Engineering. 147, 11

    Research output: Contribution to journalJournal articlepeer-review

  5. Published

    Effects of biological pre-treatment of lignocellulosic waste with white-rot fungi on the stimulation of 14C-phenanthrene catabolism in soils

    Omoni, V. T., Lag-Brotons, A. J., Ibeto, C. N. & Semple, K. T., 30/11/2021, In: International Biodeterioration and Biodegradation. 165, 10 p., 105324.

    Research output: Contribution to journalJournal articlepeer-review

  6. Published

    Intelligent fault diagnosis of machinery using digital twin-assisted deep transfer learning

    Xia, M., Shao, H., Williams, D., Lu, S., Shu, L. & de Silva, C. W., 30/11/2021, In: Reliability Engineering and System Safety. 215, 9 p., 107938.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    Comparison of Neutron Detection Performance of Four Thin-Film Semiconductor Neutron Detectors Based on Geant4

    Zhang, Z. & Aspinall, M., 27/11/2021, In: Sensors. 21, 15 p., 7930.

    Research output: Contribution to journalJournal articlepeer-review

  8. Published

    Advanced static and dynamic analysis method for helical springs of non-linear geometries

    Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.

    Research output: Contribution to journalJournal articlepeer-review

  9. In Press/Forthcoming
  10. E-pub ahead of print

    Experimental study on thermal performance of ultra-high performance concrete with coarse aggregates at high temperature

    Xue, C., Yu, M., Xu, H., Xu, L., Saafi, M. & Ye, J., expected on 3/01/2022, In: Construction and Building Materials. 314, Part A, 12 p., 125585.

    Research output: Contribution to journalJournal articlepeer-review

  11. 2021
  12. Published

    Inclined composite guardrails/safety barriers – Numerical and experimental evaluation of their transverse stiffnesses and compliance with standards

    Turvey, G. J. & Sutch, A., 15/11/2021, In: Composite Structures. 276, 9 p., 114552.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    Tuning the wettability of wire mesh column: pore-scale flow analysis

    Abdelraouf, M., Rennie, A., Burns, N., Geekie, L., Najdanovic-Visak, V. & Aiouache, F., 15/11/2021, In: Chemical Engineering Journal Advances. 8, 15 p., 100181.

    Research output: Contribution to journalJournal articlepeer-review

  14. Published

    X-ray computed tomographic and focused ion beam/electron microscopic investigation of coating defects in niobium-coated copper superconducting radio-frequency cavities

    Aliasghari, S., Skeldon, P., Zhou, X., Gholinia, A., Zhang, X., Valizadeh, R., Pira, C., Junginger, T., Burt, G. & Withers, P. J., 15/11/2021, In: Materials Chemistry and Physics. 273, 7 p., 125062.

    Research output: Contribution to journalJournal articlepeer-review

  15. E-pub ahead of print

    Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering

    Sabzi, H. E., Hernandez-Nava, E., Li, X-H., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/12/2021, In: Materials and Design. 212, 17 p., 110246.

    Research output: Contribution to journalJournal articlepeer-review

  16. E-pub ahead of print

    Active Terahertz Modulator and Slow Light Metamaterial Devices with Hybrid Graphene–Superconductor Photonic Integrated Circuits

    Kalhor, S., Kindness, S., Wallis, R., Beere, H., Ghanaatshoar, M., Degl'Innocenti, R., Kelly, M., Hofmann, S., Joyce, H., Ritchie, D. & Delfanazari, K., 8/11/2021, In: Nanomaterials. 11, 18 p., 2999.

    Research output: Contribution to journalJournal articlepeer-review

  17. Published

    An Overview on Bonded Marine Hoses for Sustainable Fluid Transfer and (Un)Loading Operations via Floating Offshore Structures (FOS)

    Amaechi, C. V., Chesterton, C., Butler, H. O., Wang, F. & Ye, J., 8/11/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 11

    Research output: Contribution to journalJournal articlepeer-review

  18. E-pub ahead of print

    Review on the design and mechanics of bonded marine hoses for Catenary Anchor Leg Mooring (CALM) buoys

    Amaechi, C. V., Chesterton, C., Butler, H. O., Wang, F. & Ye, J., 15/12/2021, In: Ocean Engineering. 242, 32 p., 110062.

    Research output: Contribution to journalJournal articlepeer-review

  19. Published

    A Low-Cost and Semi-Autonomous Robotic Scanning System for Characterising Radiological Waste

    Monk, S., West, C., Bandala Sanchez, M., Dixon, N., Montazeri, A., Taylor, C. J. & Cheneler, D., 2/11/2021, In: Robotics. 10, 4, 22 p., 119.

    Research output: Contribution to journalJournal articlepeer-review

  20. Published

    Phosphorus solubility changes following additions of bioenergy wastes to an agricultural soil: implications for crop availability and environmental mobility  

    Richards, S., Marshall, R., Lag Brotons, A., Semple, K. & Stutter, M., 1/11/2021, In: Geoderma. 401, 11 p., 115150.

    Research output: Contribution to journalJournal articlepeer-review

  21. E-pub ahead of print

    Ultra-lightweight high ductility cement composite incorporated with low PE fiber and rubber powder

    Huang, Z., Liang, T., Huang, B., Zhou, Y. & Ye, J., 20/12/2021, In: Construction and Building Materials. 312, 12 p., 125430.

    Research output: Contribution to journalJournal articlepeer-review

  22. Published

    A review of recent progress on electrocatalysts toward efficient glycerol electrooxidation

    Alaba, P. A., Lee, C. S., Abnisa, F., Aroua, M. K., Cognet, P., Pérès, Y. & Wan Daud, W. M. A., 31/10/2021, In: Reviews in Chemical Engineering. 37, 7, p. 779-811 33 p.

    Research output: Contribution to journalJournal articlepeer-review

  23. Published

    A Stacked GRU-RNN-based Approach for Predicting Renewable Energy and Electricity Load for Smart Grid Operation

    Xia, M., Shao, H., Ma, X. & de Silva, C. W., 31/10/2021, In: IEEE Transactions on Industrial Informatics. 17, 10, p. 7050-7059 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  24. E-pub ahead of print

    An ABAQUS® plug-in for generating virtual data required for inverse analysis of unidirectional composites using artificial neural networks

    Ismail, Y., Wan, L., Chen, J., Ye, J. & Yang, D., 31/10/2021, In: Engineering with Computers. 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  25. Published

    Nonlinear analytical study of structural laminated glass under hard body impact in the pre-crack stage

    Huang, X-H., Wang, X-E., Yang, J., Pan, Z., Wang, F. & Azim, I., 31/10/2021, In: Thin-Walled Structures. 167, 17 p., 108137.

    Research output: Contribution to journalJournal articlepeer-review

  26. Published

    Optical performance of a hybrid compound parabolic concentrator and parabolic trough concentrator system for dual concentration

    Sripadmanabhan Indira, S., Vaithilingam, C. A., Sivasubramanian, R., Chong, K-K., Saidur, R. & Narasingamurthi, K., 31/10/2021, In: Sustainable Energy Technologies and Assessments. 47, 20 p., 101538.

    Research output: Contribution to journalJournal articlepeer-review

  27. Published

    Radiation testing of low cost, commercial off the shelf microcontroller board

    Fried, T., Di Buono, A., Cheneler, D., Cockbain, N., Dodds, J., Green, P. R., Lennox, B., Taylor, C. J. & Monk, S., 31/10/2021, In: Nuclear Engineering and Technology. 53, 10, p. 3335-3343 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  28. In Press/Forthcoming
  29. E-pub ahead of print

    Wireless information transfer with fast neutrons

    Joyce, M. J., Aspinall, M. D., Clark, M., Dale, E., Nye, H., Parker, A., Snoj, L. & Spires, J., expected on 1/01/2022, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1021

    Research output: Contribution to journalJournal articlepeer-review

  30. 2021
  31. Published

    Highly conductive partially cross-linked poly(2,6-dimethyl-1,4-phenylene oxide) as anion exchange membrane and ionomer for water electrolysis

    Feng, Z., Esteban, P., Gupta, G., Fulton, D. & Mamlouk, M., 29/10/2021, In: International Journal of Hydrogen Energy. 46, 75, p. 37137-37151 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  32. In Press/Forthcoming
  33. E-pub ahead of print

    Influence of the microstructure on mechanical properties of SLM additive manufacturing Fe-based bulk metallic glasses

    Jiang, Q., Zhang, P., Tan, J., Yu, Z., Tian, Y., Ma, S. & Wu, D., expected on 15/02/2022, In: Journal of Alloys and Compounds. 894, 13 p., 162525.

    Research output: Contribution to journalJournal articlepeer-review

  34. 2021
  35. Published

    Mathematical Modelling of Bonded Marine Hoses for Single Point Mooring (SPM) Systems, with Catenary Anchor Leg Mooring (CALM) Buoy Application: A Review

    Amaechi, C. V., Wang, F. & Ye, J., 26/10/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 11, 61 p., 1179.

    Research output: Contribution to journalJournal articlepeer-review

  36. Published

    Graphene-based External Optoelectronic Terahertz Modulators for High Speed Wireless Communications

    Zaman, A., Almond, N., Lu, Y., Romain, X., Alves De Lima, D., Lin, H., Burton, O., Alexander-Webber, J., Hofmann, S., Mitchell, T., Griffiths, J., Beere, H., Ritchie, D. & Degl'Innocenti, R., 25/10/2021, 2021 14th UK-Europe-China Workshop on Millimetre-Waves and Terahertz Technologies (UCMMT). IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  37. In Press/Forthcoming
  38. E-pub ahead of print

    A renewable lignin-derived bio-oil for boosting the oxidation stability of biodiesel

    Umar, Y., Velasco, O., Abdelaziz, O. Y., Aboelazayem, O., Gadalla, M. A., Hulteberg, C. P. & Saha, B., expected on 31/01/2022, In: Renewable Energy. 182, p. 867-878 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  39. 2021
  40. E-pub ahead of print

    Diffusion in hypo-stoichiometric uranium mononitride

    Li, J. & Murphy, S., 31/12/2021, In: Progress in Nuclear Energy. 142, 6 p., 103995.

    Research output: Contribution to journalJournal articlepeer-review

  41. In Press/Forthcoming
  42. E-pub ahead of print

    Microscale damage evolutions in fiber-reinforced composites with different initial defects

    Ye, J., Hong, Y., Liu, L., Cai, H., He, W., Huang, B., Saafi, M., Wang, Y. & Ye, J., expected on 1/01/2022, In: Composite Structures. 279, 14 p., 114856.

    Research output: Contribution to journalJournal articlepeer-review

  43. 2021
  44. Published
  45. Published

    Quantifying water absorption of hygrothermally aged epoxies with terahertz time-domain spectroscopy

    Lin, H., Russell, B., Bawuah, P. & Zeitler, J. A., 20/10/2021, 2021 46th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  46. Published

    Assessing the energy potential of modernizing the European hydropower fleet

    Quaranta, E., Aggidis, G., Boes, R., Comoglio, C., De Michele, C., Ritesh Patro, E., Georgievskaia, E., Harby, A., Kougias, I., Muntean, S., Pérez-Díaz, J., Romero–Gomez, P., Rosa-Clot, M., Schleiss, A., Vagnoni, E., Wirth, M. & Pistocchi, A., 15/10/2021, In: Energy Conversion and Management. 246, 15 p., 114655.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    Numerical Assessment on the Dynamic Behaviour of Submarine Hoses Attached to CALM Buoy Configured as Lazy-S under Water Waves

    Amaechi, C. V., Wang, F. & Ye, J., 15/10/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 10, 48 p., 1130.

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    Improving the in vitro Degradation, Mechanical and Biological Properties of AZ91-3Ca Mg Alloy via Hydrothermal Calcium Phosphate Coatings

    Ali, A., Ikram, F., Iqbal, F., Fatima, H., Mehmood, A., Kolawole, M. Y., Chaudhry, A. A., Siddiqi, S. A. & Rehman, I. U., 13/10/2021, In: Frontiers Materials. 8, 14 p., 715104.

    Research output: Contribution to journalJournal articlepeer-review

  49. Published

    Wind Speed and Solar Irradiance Prediction Using a Bidirectional Long Short-Term Memory Model Based on Neural Networks

    Alharbi, F. & Csala, D., 11/10/2021, In: Energies. 14, 20, p. 1-23 23 p., 6501.

    Research output: Contribution to journalJournal articlepeer-review

  50. Published

    α-particle induced yield of 6.13 MeV γ-rays in carbon

    Croft, S., Favalli, A. & McElroy Jr., R. D., 11/10/2021, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1013, 3 p., 165636.

    Research output: Contribution to journalJournal articlepeer-review

  51. E-pub ahead of print

    Hydrothermal performance improvement of an inserted double pipe heat exchanger with Ionanofluid

    Das, L., Rubbi, F., Habib, K., Saidur, R., Islam, N., Saha, B. B., Aslfattahi, N. & Irshad, K., 31/12/2021, In: Case Studies in Thermal Engineering. 28, 21 p., 101533.

    Research output: Contribution to journalJournal articlepeer-review

  52. In Press/Forthcoming
  53. E-pub ahead of print

    AlCoCrFeNi high entropy alloy fabricated via selective laser melting reinforced by Fe-based metallic glass

    Jiang, Q., Zhang, P., Yu, Z., Tian, Y. & Ma, S., expected on 15/01/2022, In: Materials Letters. 307, 5 p., 130994.

    Research output: Contribution to journalJournal articlepeer-review

  54. 2021
  55. Published

    Machine Learning-Based Condition Monitoring for PV Systems: State of the Art and Future Prospects

    Berghout, T., Benbouzid, M., Bentrcia, T., Ma, X., Djurović, S. & Mouss, L-H., 3/10/2021, In: Energies. 14, 19, 25 p., 6316.

    Research output: Contribution to journalLiterature reviewpeer-review

  56. Published

    A rationalised CFD design methodology for Turgo turbines to enable local manufacture in the Global South

    Butchers, J., Benzon, S., Williamson, S., Booker, J. & Aggidis, G., 1/10/2021, In: Energies. 14, Energies 2021, 23 p., 6250.

    Research output: Contribution to journalJournal articlepeer-review

  57. In Press/Forthcoming
  58. E-pub ahead of print

    Deformation twinning-induced dynamic recrystallization during laser powder bed fusion

    Sabzi, H. E., Li, X-H., Zhang, C., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., expected on 15/01/2022, In: Scripta Materialia. 207, 114307.

    Research output: Contribution to journalJournal articlepeer-review

  59. 2021
  60. Published

    Efficiency enhancement of a solar dish collector operating with a novel soybean oil-based-MXene nanofluid and different cavity receivers

    Aslfattahi, N., Loni, R., Bellos, E., Najafi, G., Kadirgama, K., Harun, W. S. W. & Saidur, R., 1/10/2021, In: Journal of Cleaner Production. 317, 16 p., 128430.

    Research output: Contribution to journalJournal articlepeer-review

  61. E-pub ahead of print

    Hydrogen-rich syngas production from bi-reforming of greenhouse gases over zirconia modified Ni/MgO catalyst

    Farooqi, A. S., Yusuf, M., Zabidi, N. A. M., Saidur, R., Shahid, M. U., Ayodele, B. V. & Abdullah, B., 1/10/2021, In: International Journal of Energy Research. 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  62. Published

    Machine learning-enabled prediction of wind turbine energy yield losses due to general blade leading edge erosion

    Cappugi, L., Castorrini, A., Bonfiglioli, A., Minisci, E. & Campobasso, S., 1/10/2021, In: Energy Conversion and Management. 245, 17 p., 114567.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Simulation and experimental study of proton bunch self-modulation in plasma with linear density gradients

    AWAKE Collaboration & Henderson, J., 1/10/2021, In: Physical Review Accelerators and Beams. 24, 10, 13 p., 101301.

    Research output: Contribution to journalJournal articlepeer-review

  64. Published

    Anisotropic thermal conductivity in Li2TiO3 ceramic breeder materials

    Sanjeev, M., Gilbert, M. & Murphy, S., 30/09/2021, In: Fusion Engineering and Design. 170, 8 p., 112710.

    Research output: Contribution to journalJournal articlepeer-review

  65. Published

    Development of a D-band Traveling Wave Tube for high data rate wireless links

    Basu, R., Mahadev Rao, J., Quang, T. L., Letizia, R. & Paoloni, C., 30/09/2021, In: IEEE Transactions on Electron Devices. 68, 9, p. 4675-4680 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  66. Published

    Effects of Bruising of ‘Pink Lady’ Apple Under Impact Loading in Drop Test on Firmness, Colour and Gas Exchange of Fruit During Long Term Storage

    Celik, H. K., Ustun, H., Erkan, M., Rennie, A. & Akinci, I., 30/09/2021, In: Postharvest Biology and Technology. 179, 13 p., 111561.

    Research output: Contribution to journalJournal articlepeer-review

  67. Published

    Enzyme catalysis coupled with artificial membranes towards process intensification in biorefinery- a review

    Mazzei, R., Yihdego Gebreyohannes, A., Papaioannou, E., Nunes, S. P., Vankelecom, I. F. J. & Giorno, L., 30/09/2021, In: Bioresource Technology. 335, 13 p., 125248.

    Research output: Contribution to journalJournal articlepeer-review

  68. Published

    Hybrid and adhesively bonded joints with dissimilar adherends: a critical review

    Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.

    Research output: Contribution to journalReview articlepeer-review

  69. Published

    Nuclear Soundscapes: Exploring Sound in Radioactive Environments

    Pantsidou, M. & Li, J., 30/09/2021, In: AM Journal of Art and Media Studies. 25, p. 1-12 12 p., 458.

    Research output: Contribution to journalJournal articlepeer-review

  70. Published

    Study on waxy crudes characterisation and chemical inhibitor assessment

    Makwashi, N., Zhao, D., Abdulkadir, M., Ahmed, T. & Muhammad, I., 30/09/2021, In: Journal of Petroleum Science and Engineering. 204, 16 p., 108734.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    The femtosecond laser induced Zr64.13Cu15.75Ni10.12Al10 amorphous periodic surface structure

    Wang, J., Zhang, P., Shen, L., Yu, Z., Shi, H. & Tian, Y., 30/09/2021, In: Journal of Manufacturing Processes. 69, p. 613-620 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  72. Published

    The response of macrophages and their osteogenic potential modulated by micro/nano-structured Ti surfaces

    Liu, W., Liang, L., Liu, B., Zhao, D., Tian, Y., Huang, Q. & Wu, H., 30/09/2021, In: Colloids and Surfaces B: Biointerfaces. 205, 11 p., 111848.

    Research output: Contribution to journalJournal articlepeer-review

  73. In Press/Forthcoming
  74. E-pub ahead of print

    Femtosecond laser-induced transformation mechanism from 1D groove structure to 2D microholes structure on the surface of Zr-based metallic glasses

    Huang, H., Zhang, P., Yu, Z., Shen, L., Shi, H. & Tian, Y., expected on 28/02/2022, In: Optics and Laser Technology. 146, 14 p., 107555.

    Research output: Contribution to journalJournal articlepeer-review

  75. 2021
  76. Published

    Modular Multilevel Converters for Large-Scale Grid-Connected Photovoltaic Systems: A Review

    Alotaibi, S. & Darwish, A., 29/09/2021, In: Energies. 14, 19, 30 p., 6213.

    Research output: Contribution to journalJournal articlepeer-review

  77. E-pub ahead of print

    Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review

    Zhang, P., Tan, J., Tian, Y., Yan, H. & Yu, Z., 26/09/2021, In: International Journal of Advanced Manufacturing Technology.

    Research output: Contribution to journalJournal articlepeer-review

  78. Published

    Comparative life cycle assessment of NAD(P)H regeneration technologies

    Burnett, J., Sun, Z., Li, J., Wang, X. & Wang, X., 21/09/2021, In: Green Chemistry. 23, 18, p. 7162-7169 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  79. Published

    A global-scale screening of non-native aquatic organisms to identify potentially invasive species under current and future climate conditions

    Vilizzi, L., Copp, G. H., Hill, J. E., Adamovich, B., Aislabie, L., Akin, D., Al-Faisal, A. J., Almeida, D., Azmai, M. N. A., Bakiu, R., Bellati, A., Bernier, R., Bies, J. M., Bilge, G., Branco, P., Bui, T. D., Canning-Clode, J., Cardoso Ramos, H. A., Castellanos-Galindo, G. A., Castro, N. & 176 others, Chaichana, R., Chainho, P., Chan, J., Cunico, A. M., Curd, A., Dangchana, P., Dashinov, D., Davison, P. I., de Camargo, M. P., Dodd, J. A., Durland Donahou, A. L., Edsman, L., Ekmekçi, F. G., Elphinstone-Davis, J., Erős, T., Evangelista, C., Fenwick, G., Ferincz, Á., Ferreira, T., Feunteun, E., Filiz, H., Forneck, S. C., Gajduchenko, H. S., Gama Monteiro, J., Gestoso, I., Giannetto, D., Gilles A.S., J., Gizzi, F., Glamuzina, B., Glamuzina, L., Goldsmit, J., Gollasch, S., Goulletquer, P., Grabowska, J., Harmer, R., Haubrock, P. J., He, D., Hean, J. W., Herczeg, G., Howland, K. L., İlhan, A., Interesova, E., Jakubčinová, K., Jelmert, A., Johnsen, S. I., Kakareko, T., Kanongdate, K., Killi, N., Kim, J-E., Kırankaya, Ş. G., Kňazovická, D., Kopecký, O., Kostov, V., Koutsikos, N., Kozic, S., Kuljanishvili, T., Kumar, B., Kumar, L., Kurita, Y., Kurtul, I., Lazzaro, L., Lee, L., Lehtiniemi, M., Leonardi, G., Leuven, R. S. E. W., Li, S., Lipinskaya, T., Liu, F., Lloyd, L., Lorenzoni, M., Luna, S. A., Lyons, T. J., Magellan, K., Malmstrøm, M., Marchini, A., Marr, S. M., Masson, G., Masson, L., McKenzie, C. H., Memedemin, D., Mendoza, R., Minchin, D., Miossec, L., Moghaddas, S. D., Moshobane, M. C., Mumladze, L., Naddafi, R., Najafi-Majd, E., Năstase, A., Năvodaru, I., Neal, J. W., Nienhuis, S., Nimtim, M., Nolan, E. T., Occhipinti-Ambrogi, A., Ojaveer, H., Olenin, S., Olsson, K., Onikura, N., O'Shaughnessy, K., Paganelli, D., Parretti, P., Patoka, J., Pavia R.T.B., J., Pellitteri-Rosa, D., Pelletier-Rousseau, M., Peralta, E. M., Perdikaris, C., Pietraszewski, D., Piria, M., Pitois, S., Pompei, L., Poulet, N., Preda, C., Puntila-Dodd, R., Qashqaei, A. T., Radočaj, T., Rahmani, H., Raj, S., Reeves, D., Ristovska, M., Rizevsky, V., Robertson, D. R., Robertson, P., Ruykys, L., Saba, A. O., Santos, J. M., Sarı, H. M., Segurado, P., Semenchenko, V., Senanan, W., Simard, N., Simonović, P., Skóra, M. E., Slovák Švolíková, K., Smeti, E., Šmídová, T., Špelić, I., Srėbalienė, G., Stasolla, G., Stebbing, P., Števove, B., Suresh, V. R., Szajbert, B., Ta, K. A. T., Tarkan, A. S., Tempesti, J., Therriault, T. W., Tidbury, H. J., Top-Karakuş, N., Tricarico, E., Troca, D. F. A., Tsiamis, K., Tuckett, Q. M., Tutman, P., Uyan, U., Uzunova, E., Vardakas, L., Velle, G., Verreycken, H., Vintsek, L., Wei, H., Weiperth, A., Weyl, O. L. F., Winter, E. R., Włodarczyk, R., Wood, L. E., Yang, R., Yapıcı, S., Yeo, S. S. B., Yoğurtçuoğlu, B., Yunnie, A. L. E., Zhu, Y., Zięba, G., Žitňanová, K. & Clarke, S., 20/09/2021, In: Science of the Total Environment. 788, 16 p., 147868.

    Research output: Contribution to journalJournal articlepeer-review

  80. In Press/Forthcoming
  81. E-pub ahead of print

    A hybrid LSTM-KLD approach to condition monitoring of operational wind turbines

    Wu, Y. & Ma, X., expected on 31/01/2022, In: Renewable Energy. 181, p. 554-566 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  82. 2021
  83. Published

    Intelligent Condition Monitoring of Wind Power Systems: State of the Art Review

    Benbouzid, M., Berghout, T., Sarma, N., Djurović, S., Wu, Y. & Ma, X., 20/09/2021, In: Energies. 14, 18, 33 p., 5967.

    Research output: Contribution to journalLiterature reviewpeer-review

  84. Published

    Current state and perspectives on transesterification of triglycerides for biodiesel production

    Salaheldeen, M., Mariod, A. A., Aroua, M. K., Rahman, S. M. A., Soudagar, M. E. M. & Fattah, I. M. R., 18/09/2021, In: Catalysts. 11, 9, 37 p., 1121.

    Research output: Contribution to journalJournal articlepeer-review

  85. Published

    Nuclear-driven production of renewable fuel additives from waste organics

    Plant, A. G., Kos, B., Jazbec, A., Snoj, L., Najdanovic-Visak, V. & Joyce, M. J., 17/09/2021, In: Communications Chemistry. 4, 1, 132.

    Research output: Contribution to journalJournal articlepeer-review

  86. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to journalJournal articlepeer-review

  87. Published

    Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact

    Wang, X-E., Huang, X-H., Yang, J., Hou, X., Zhu, Y. & Xie, D., 15/09/2021, In: International Journal of Mechanical Sciences. 206, 20 p., 106613.

    Research output: Contribution to journalJournal articlepeer-review

  88. E-pub ahead of print

    Mechanism of CaO catalyst deactivation with unconventional monitoring method for glycerol carbonate production via transesterification of glycerol with dimethyl carbonate

    Praikaew, W., Kiatkittipong, W., Aiouache, F., Najdanovic-Visak, V., Termtanun, M., Wei Lim, J., Shiung Lam, S., Kiatkittipong, K., Laosiripojana, N., Boonyasuwat, S. & Assabumrungrat, S., 15/09/2021, In: International Journal of Energy Research.

    Research output: Contribution to journalJournal articlepeer-review

  89. E-pub ahead of print

    Saturated Output-Feedback Hybrid Reinforcement Learning Controller for Submersible Vehicles Guaranteeing Output Constraints

    Elhaki, O., Shojaei, K., Shanahan, D. & Montazeri, A., 15/09/2021, In: IEEE Access. 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  90. Published

    2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization

    Chi, Y., Huang, B., Saafi, M., Fullwood, N., Lambert, C., Whale, E., Hepworth, D. & Ye, J., 13/09/2021, In: Construction and Building Materials. 299, 23 p., 123867.

    Research output: Contribution to journalJournal articlepeer-review

  91. E-pub ahead of print

    Microstructures and mechanical properties of reduced activation ferritic/martensitic steel fabricated by laser melting deposition

    Feng, J., Zhang, P., Jia, Z., Yu, Z., Fang, C., Yan, H., Shi, H. & Tian, Y., 31/12/2021, In: Fusion Engineering and Design. 173, 12 p., 112865.

    Research output: Contribution to journalJournal articlepeer-review

  92. Published

    Fault diagnosis of a rotor-bearing system under variable rotating speeds using two-stage parameter transfer and infrared thermal images

    Shao, H., Li, W., Xia, M., Zhang, Y., Shen, C., Williams, D., Kennedy, A. & De Silva, C. W., 10/09/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  93. Published

    A Case Study of Fractional-Order Control

    Alarfaj, Y., 1/09/2021, Lancaster University. 179 p.

    Research output: ThesisDoctoral Thesis

  94. Published

    A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts

    Farooqi, A. S., Yusuf, M., Mohd Zabidi, N. A., Saidur, R., Sanaullah, K., Khan, A. & Abdullah, B., 1/09/2021, In: International Journal of Hydrogen Energy. 46, 60, p. 31024-31040 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  95. E-pub ahead of print

    Escherichia coli as an antibody expression host for the production of diagnostic proteins: significance and expression

    Huleani, S., Roberts, M. R., Beales, L. & Papaioannou, E. H., 1/09/2021, In: Critical Reviews in Biotechnology.

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    Back propagation modeling of shear stress and viscosity of aqueous Ionic-MXene nanofluids

    Afzal, A., Yashawantha, K. M., Aslfattahi, N., Saidur, R., Abdul Razak, R. K. & Subbiah, R., 31/08/2021, In: Journal of Thermal Analysis and Calorimetry. 145, p. 2129-2149 21 p.

    Research output: Contribution to journalJournal articlepeer-review

  97. Published

    Machine learnt prediction method for rain erosion damage on wind turbine blades

    Castorrini, A., Venturini, P., Corsini, A. & Rispoli, F., 31/08/2021, In: Wind Energy. 24, 8, p. 917-934 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  98. Published

    Radiation Sensing: Design and Deployment of Sensors and Detectors

    Gamage, K. A. A. (ed.) & Taylor, C. J. (ed.), 31/08/2021, Multidisciplinary Digital Publishing Institute (MDPI). 101 p.

    Research output: Book/Report/ProceedingsBook

  99. Published

    Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

    Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  100. Published

    Different Approaches for Manufacturing Ti-6Al-4V Alloy with Triply Periodic Minimal Surface Sheet-Based Structures by Electron Beam Melting

    Khrapov, D., Kozadayeva, M., Manabaev, K., Panin, A., Sjöström, W., Koptyug, A., Mishurova, T., Evsevleev, S., Meinel, D., Bruno, G., Cheneler, D., Surmenev, R. & Surmeneva, M., 29/08/2021, In: Materials. 14, 17, 21 p., 4912.

    Research output: Contribution to journalJournal articlepeer-review

  101. Published

    Alkaline wood ash, turbulence, and traps with excess of sulfuric acid do not strip completely the ammonia off an agro-waste digestate

    Moure Abelenda, A., Semple, K., Lag Brotons, A., Herbert, B., Aggidis, G. & Aiouache, F., 28/08/2021, In: Edelweiss Chemical Science Journal. 4, 1, p. 19-24 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  102. Published

    Short-Term Solar Irradiance Forecasting Model Based on Bidirectional Long Short-Term Memory Deep Learning

    Alharbi, F. & Csala, D., 27/08/2021, 2021 International Conference on Electrical, Communication, and Computer Engineering (ICECCE). IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  103. Published

    Selective laser melted AlSi10Mg alloy under melting mode transition: Microstructure evolution, nanomechanical behaviors and tensile properties

    Wu, H., Ren, Y., Ren, J., Liang, L., Li, R., Fang, Q., Cai, A., Shan, Q., Tian, Y. & Baker, I., 25/08/2021, In: Journal of Alloys and Compounds. 873, 10 p., 159823.

    Research output: Contribution to journalJournal articlepeer-review

  104. Published

    Dynamics-Based Modified Fast Simultaneous Localisation and Mapping for Unmanned Aerial Vehicles with Joint Inertial Sensor Bias and Drift Estimation

    Sadeghzadeh Nokhodberiz, N., Can, A., Stolkin, R. & Montazeri, A., 24/08/2021, In: IEEE Access. 9, p. 120247-120260 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  105. Forthcoming

    Amine-Rich Coatings to Potentially Promote Cell Adhesion, Proliferation and Differentiation, and Reduce Microbial Colonization: Strategies for Generation and Characterization

    Martocq, L. & Douglas, T., 17/08/2021, (Accepted/In press) In: Coatings.

    Research output: Contribution to journalJournal articlepeer-review

  106. Published

    Pushing the Capture Limit of Thermionic Gun Linacs

    Saitiniyazi, S., Castilla Loeza, A., McKenzie, J., Apsimon, R., Militsyn, B., Angal-Kalinin, D. & Burt, G., 16/08/2021, In: Physical Review Accelerators and Beams. 24, 8, 12 p., 080401.

    Research output: Contribution to journalJournal articlepeer-review

  107. Published

    Fundamental properties of octalithium plumbate ceramic breeder material

    Davies, A. W. & Murphy, S. T., 15/08/2021, In: Journal of Nuclear Materials. 552, 8 p., 152982.

    Research output: Contribution to journalJournal articlepeer-review

  108. Published

    Kinetic study of the stabilization of an agro-industrial digestate by adding wood bottom ash

    Moure Abelenda, A., Semple, K., Lag Brotons, A., Herbert, B., Aggidis, G. & Aiouache, F., 15/08/2021, In: Chemical Engineering Journal Advances. 7, 7 p., 100127.

    Research output: Contribution to journalJournal articlepeer-review

  109. Published

    Martensite formation in titanium alloys: Crystallographic and compositional effects

    Bignon, M., Bertrand, E., Rivera-Díaz-del-Castillo, P. E. J. & Tancret, F., 15/08/2021, In: Journal of Alloys and Compounds. 872, 16 p., 159636.

    Research output: Contribution to journalJournal articlepeer-review

  110. Published

    Optimizing Converter Layer and Active Volume Thickness for Gallium Nitride Neutron Detectors

    Zhang, Z. & Aspinall, M., 12/08/2021, 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). Boston, MA, USA: IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  111. E-pub ahead of print

    Porous materials for low-temperature H2S-removal in fuel cell applications

    Mao, D., Griffin, J. M., Dawson, R., Fairhurst, A., Gupta, G. & Bimbo, N., 15/12/2021, In: Separation and Purification Technology. 277, 16 p., 119426.

    Research output: Contribution to journalJournal articlepeer-review

  112. Published

    Study regarding the influence of material type on economic objectives in MEx fabrication

    Ulmeanu, M-E., Doicin, C-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.

    Research output: Contribution to journalConference articlepeer-review

  113. Published

    A review on the effect of laser pulse shaping on the microstructure and hot cracking behavior in the welding of alloys

    Zhang, P., Jia, Z., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Chen, J., Wang, F. & Tian, Y., 1/08/2021, In: Optics and Laser Technology. 140, 20 p., 107094.

    Research output: Contribution to journalJournal articlepeer-review

  114. E-pub ahead of print

    Laser pyrolysis in papers and patents

    Spreafico, C., Russo, D. & Degl’Innocenti, R., 1/08/2021, In: Journal of Intelligent Manufacturing. 33 p.

    Research output: Contribution to journalJournal articlepeer-review

  115. Published

    Micromechanical analysis of UD CFRP composite lamina under multiaxial loading with different loading paths

    Chen, J., Wan, L., Ismail, Y., Hou, P., Ye, J. & Yang, D., 1/08/2021, In: Composite Structures. 269, 13 p., 114024.

    Research output: Contribution to journalJournal articlepeer-review

  116. Published

    Reliability-based design assessment of offshore inflatable barrier structures made of fibre-reinforced composites

    Aboshio, A., Uche, A. O., Akagwu, P. & Ye, J., 1/08/2021, In: Ocean Engineering. 233, 10 p., 109016.

    Research output: Contribution to journalJournal articlepeer-review

  117. Unpublished

    Highly Efficient Generation of Energy from Waste and Biomass Using Microwave-Induced Plasma Gasification

    Vecten, S., 08/2021, (Unpublished) Lancaster University. 220 p.

    Research output: ThesisDoctoral Thesis

  118. Published

    Flux-Weakening Control of Dual Three-Phase PMSM Based on Vector Space Decomposition Control

    Hu, Y., Li, Y., Ma, X., Li, X. & Huang, S., 31/07/2021, In: IEEE Transactions on Power Electronics . 36, 7, p. 8428-8438 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  119. Published

    Metal organic frameworks for hydrogen purification

    Mao, D., Griffin, J. M., Dawson, R., Fairhurst, A. & Bimbo, N., 31/07/2021, In: International Journal of Hydrogen Energy. 46, 45, p. 23380-23405 26 p.

    Research output: Contribution to journalJournal articlepeer-review

Previous 1 2 3 4 5 6 7 8 ...51 Next

Back to top