Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. 1997
  2. Published

    A new quality estimation methodology for mixed-signal and analogue ICs

    Olbrich, T., Grout, I. A., Aimine, Y. E., Richardson, A. M. & Contensou, J., 1997, European Design and Test Conference, 1997. ED&TC 97. Proceedings . LOS ALAMITOS: I E E E, COMPUTER SOC PRESS, p. 573-580 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  3. Published

    An HF magnetospheric radar for EISCAT

    Rietveld, M. T., Honary, F., Robinson, T. R., Thide, B. & Stubbee, P., 1997, Proceedings of the 8th EISCAT international workshop. Leicester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  4. Published

    Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.

    Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.

    Research output: Contribution to journalJournal article

  5. Published

    Axisymmetric vibration analysis of laminated hollow cylinders with ring stiffeners

    Ye, J. Q., 1997, In: Composite Structures. 38, 1-4, p. 151-156 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  6. Published

    Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy

    Rehman, I. & Bonfield, W., 1997, In: Journal of Materials Science: Materials in Medicine. 8, 1, p. 1-4 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  7. Published

    Circular plates with one diametral stiffener: an elastic large deflection analysis.

    Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.

    Research output: Contribution to journalJournal article

  8. Published

    Coding for Both Protection and Synchronisation

    Coulton, P., Hannaford, C. & Honary, B., 1997, Communications coding and signal processing: third volume on communication theory and applications. Honary, B., Darnell, M. & Farrell, P. (eds.). Taunton: Research Studies Press Ltd., p. 133-147 15 p. (Electronic & electrical engineering research studies. Communications systems, techniques, and applications series; vol. 2).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  9. Published

    Computational agent to integrate expert system and simulation language.

    da Silva, J. C., Bennett, D. & Counsell, J. M., 1997, Proceedings of the 9th European simulation symposium. Germany

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  10. Published

    Computer aided conceptual design '97 : proceedings of the 1997 Lancaster International Workshop on Engineering Design CACD'97.

    Bradshaw, A. & Counsell, J. M., 1997, Lancaster: Lancaster University: Centre for the Study of Environmental Change. 144 p.

    Research output: Book/Report/ProceedingsBook

  11. Published

    Computer support environment applying object-oriented methods for hydraulic systems design.

    da Silva, J. C. & Cheung, H. F., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 117-131 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  12. Published

    Co-ordinated studies using imaging riometer and incoherent scatter radar

    Collis, P. N. & Hargreaves, J. K., 1997, In: Journal of Atmospheric and Solar-Terrestrial Physics. 59, 8, p. 873-890 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  13. Published

    Current-mode techniques for self-testing analogue circuits

    Baturone, I., SanchezSolano, S., Richardson, A. M. & Huertas, J. L., 1997, IDDQ Testing, 1997. Digest of Papers., IEEE International Workshop on . Jayasumana, AP. & Tong, C. (eds.). LOS ALAMITOS: I E E E, COMPUTER SOC PRESS, p. 33-37 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  14. Published

    Data encoding system

    Honary, B., Chippendale, P., Arthur, P., Maundrell, M. & DRA Malvern (Patent applicant), 1997, Patent No. 2576002

    Research output: Patent

  15. Published

    Design of helix applicators for microwave heating.

    Carter, R. G. & Wang, P., 1997, In: Journal of Microwave Power and Electromagnetic Energy. 32, 4, p. 199-204 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  16. Published

    Design principles for mechatronic systems.

    Counsell, J. M., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 17-26 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  17. Published

    Developing the safety case for large mobile robots.

    Seward, D. W., Quayle, S., Sommerville, I. & Morey, R., 1997, Advances in safety and reliability : proceedings of the ESREL '97 International Conference on Safety and Reliability, 17 - 20 June 1997, Lisbon, Portugal. Soares, C. G. (ed.). Oxford: Pergamon, p. 2293-2300 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  18. Published

    Development in electromagnetic tomography for industrial applications.

    Lyon, G. M., Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the progress in electromagnetics research symposium: PIERS. Hong Kong

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  19. Published

    Development of a modular data acquisition system for electrical tomography.

    Lyon, G. M. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  20. Published

    Development of sensor arrays for electromagnetic tomography.

    Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  21. Published

    Equivalent circuit modelling of helix slow-wave structures.

    Carter, R. G. & Wang, P., 1997, Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. The Netherlands: ESTEC, p. 127

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  22. Published

    Evaluation of in vitro bioactivity and biocompatibility of Bioglass®-reinforced polyethylene composite

    Huang, J., Di Silvio, L., Wang, M., Rehman, I., Ohtsuki, C. & Bonfield, W., 1997, In: Journal of Materials Science: Materials in Medicine. 8, 12, p. 809-813 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  23. Published

    Fault-tolerant and self-testable architectures for zero failure electronics

    Richardson, A., Sharif, E. & Betts, W. R., 1997, AUTOMOTIVE ELECTRONICS - AUTOTECH'97. EDMUNDS: MECHANICAL ENGINEERING PUBL, p. 133-142 10 p. (IMechE seminar publication ; 1997-10).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  24. Published

    Forecasting and control of interurban traffic networks using a state space formulated traffic model

    Taylor, J., Whittaker, J., Young, P. & Chotai, A., 1997, International Federation of Automatic Control 8th symposium on Transportation systems .

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  25. Published

    Forecasting, simulation and PIP control of interurban traffic networks

    Taylor, J., Young, P. & Chotai, A., 1997, 12th International Conference on Systems Engineering.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  26. Published

    Fourier transform infrared analysis of poly(ester-urethanes) at low temperature in-situ by using a newly constructed liquid nitrogen cooled sample stage

    Rehman, I., Barnardo, C. & Smith, R., 1997, In: Journal of Materials Science. 32, 10, p. 2617-2621 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  27. Published

    Full-section yield analysis of uniformly loaded sector plates.

    Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  28. Published

    Fusion finds the Midas touch.

    Joyce, M. & Regan, P., 1997, In: Daily Telegraph.

    Research output: Contribution to journalJournal article

  29. Published

    How does boron stop neutrons?

    Joyce, M., 1997, In: Third Millennium Magazine.

    Research output: Contribution to journalJournal article

  30. Published

    In the Alchemist's chair.

    Joyce, M. & Regan, P., 1997, In: Third Millennium Magazine.

    Research output: Contribution to journalJournal article

  31. Published

    Joint imaging riometer - incoherent scatter radar observations: A four-dimensional perspective on energetic particle input to the auroral mesosphere

    Collis, P. N., Hargreaves, J. K., Howarth, W. G. & White, G. P., 1997, In: Advances in Space Research. 20, 6, p. 1165-1168 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  32. Published

    LUCIE - Lancaster University computerised intelligent excavator.

    Seward, D. W. & Quayle, S., 1997, In: Circuit Cellar - The Magazine For Computer Applications. 79, p. 67-73 7 p.

    Research output: Contribution to journalJournal article

  33. Published

    Magnetron frequency twinning.

    Carter, R. G., Ball, E. M. & Brady, M. B., 1997, Proceedings of the ESA/NATO workshop on microwave tubes for space, military and commercial applications. The Netherlands: ESTEC, p. 127

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  34. Published

    Modelling and control design for free air CO2 enrichment systems used in plant physiology atmospheric change experiments

    Taylor, J., Young, P., Chotai, A. & Mcleod, A., 1997, International Federation of Automatic Control 3rd Workshop on Mathematical and Control Applications in Agriculture and Horticulture . Pergamon

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    Modelling and control design for open top chambers used in plant physiology climate change experiments

    Lees, M., Taylor, J., Young, P. & Chotai, A., 1997, International Federation of Automatic Control 3rd symposium on Modelling and Control in Biomedical Systems including Biological Systems . Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  36. Published

    Multi-diagnostic observations of heater-induced effects at pump frequencies close to the electron gyroharmonics.

    Honary, F., Stocker, A. J., Robinson, T. R., Rietveld, M. T. & McCrea, I. W., 1997, Proceedings of the 8th EISCAT international workshop. Leicester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  37. Published

    Multi-instrument case studies of arc dynamics and substorm effects.

    Gazey, N. G. J., del Pozo, C. F., Williams, P. J. S., Sedgemore, K. J. F., Honary, F. & Smith, P. N., 1997, Proceedings of the 8th EISCAT international workshop. Leicester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  38. Published

    Navigation system design for an individual excavator robot.

    Yavuz, H., Bradshaw, A. & Dogantan, Z. S., 1997, Proceedings of Mamkon '97. Istanbul, p. 489-495 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  39. Published

    Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.

    Turvey, G. J. & Drinali, H., 1997, In: Computers and Structures. 63, 4, p. 769-773 5 p.

    Research output: Contribution to journalJournal article

  40. Published

    On generalised concatenated codes

    Sonander, S. & Honary, B., 1997, Cryptography and Coding: 6th IMA International Conference Cirencester, UK, December 17–19, 1997 Proceedings. Darnell, M. (ed.). Berlin: Springer, p. 307-316 10 p. (Lecture Notes in Computer Science; vol. 1355).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  41. Published

    Powder metallurgical processing of Ni-Ti shape memory alloy

    Green, S. M., Grant, D. M. & Kelly, N. R., 1997, In: Powder Metallurgy. 40, 1, p. 43-47 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    Preparation and characterization of fluoride-substituted apatites

    Jha, L. J., Best, S. M., KNOWLES, J. C., Rehman, I., Santos, J. D. & Bonfield, W., 1997, In: Journal of Materials Science: Materials in Medicine. 8, 4, p. 185-191 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  43. Published

    Regulation of inflammatory mediator production in human colonic epithelial cells.

    Kolios, G., Wright, K. L., Jordan, N. J., Leithead, J. B., Murphy, C. T., Robertson, D. A. F. & Westwick, J., 1997, In: Hellenic Journal of Gastroenterology. 10, 2, p. 135-147 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    Robust PIP control of multivariable stochastic systems

    Taylor, J., Young, P. & Chotai, A., 1997, 12th International Conference on Systems Engineering.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  45. Published

    Safe systems architectures for autonomous robots.

    Sommerville, I., Seward, D. W., Morey, R. & Quayle, S., 1997, Proceedings of the safety critical systems conference. Brighton

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  46. Published

    Shape Memory Transformation in Mechanically Alloyed Ni-50at % Ti

    Green, S. M., Grant, D. M. & Wood, J. V., 1997, In: Journal de Physique 4. 07, C5, p. 351-356 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    The art (or science?) of creativity.

    Joyce, M., 1997, In: Third Millennium Magazine.

    Research output: Contribution to journalJournal article

  48. Published

    The automation of piling rig positioning using satellite GPS.

    Seward, D. W., Scott, J., Findlay, J. & Kinniburgh, H., 1997, In: Automation in Construction. 6, 3, p. 229-240 12 p.

    Research output: Contribution to journalJournal article

  49. Published

    The development of a rapid-prototyping technique for mechatronic-augmented heavy plant.

    Melling, G., Bradley, D. A., McKee, D. & Widden, M. B., 1997, In: Automation in Construction. 5, 5, p. 365-378 14 p.

    Research output: Contribution to journalJournal article

  50. Published

    The development of an interactive simulation of site information technology systems in relation to construction automation.

    Scott, J., Bradley, D. A., Seward, D. W., Adelson, R. M. & Pengelly, M., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 154-165 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  51. Published

    The micro-optical ring electrode: Development of a novel electrode for photoelectrochemistry

    Pennarun, G. I., Boxall, C. & OHare, D., 1997, Proceedings of the Symposium on Chemical and Biological Sensors and Analytical Electrochemical Methods. Ricco, AJ., Vanyek, P., Horvai, G. & Silva, AF. (eds.). PENNINGTON: ELECTROCHEMICAL SOCIETY INC, p. 1039-1051 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  52. Published

    The simulation and modelling of safety systems for construction robots.

    Zhang, L., Bradley, D. A. & Seward, D. W., 1997, Proceedings of the 14th international symposium on robotics in construction. Pittsburgh: Carnegie Mellon University, p. 224-229 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  53. Published

    Trellis decoding of Reed-Solomon codes: a practical approach

    Honary, B., Markarian, G. & Marple, S. R., 1997, Communications coding and signal processing: third volume on communication theory and applications. Honary, B., Darnell, M. & Farrell, P. (eds.). Taunton: Research Studies Press Ltd., p. 133-147 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  54. Published

    Validation and certification of civil engineering structural design software.

    Dickinson, S. J. & Bradshaw, A., 1997, Proceedings of the worldwide ECCE symposium: computers in the practice of building and civil engineering. Finland

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  55. Published

    Vibration of laminated composite panels with intermediate point supports and clamped edges

    Ye, J., 1997, Proceedings of the 2nd International Symposium on Structures and Foundations in Civil Engineering. Shen, C. K., Kuang, J. S. & Ng, C. W. W. (eds.). Hong Kong: Department of Civil and Structural Engineering, The Hong Kong University of Science and Technology, p. 103-108

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  56. Published

    Design procedure for monolithic matrix amplifier

    Paoloni, C. & DAgostino, S., 01/1997, In: IEEE Transactions on Microwave Theory and Techniques. 45, 1, p. 135-139 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  57. Published

    Frequency estimation from few measurements

    Adelson, R., 01/1997, In: Digital Signal Processing. 7, 1, p. 47-54 8 p.

    Research output: Contribution to journalJournal article

  58. Published

    A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges

    Ye, J. Q., 30/01/1997, In: Computer Methods in Applied Mechanics and Engineering. 140, 3-4, p. 383-392 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  59. Published

    Integrating testability into microsystems

    Olbrich, T., Richardson, A., Vermeiren, W. & Straube, B., 02/1997, In: Microsystem Technologies. 3, 2, p. 72-79 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  60. Published

    XPS characterisation of surface modified Ni-Ti shape memory alloy

    Green, S. M., Grant, D. M. & Wood, J. V., 31/03/1997, In: Materials Science and Engineering: A. 224, 1–2, p. 21-26 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  61. Published

    Adaptive PIP control with application to greenhouse systems and dynamic traffic management

    Taylor, J. & Chotai, A., 10/04/1997, IEE Colloquium on Adaptive Controllers in Practice, Digest No 97/176. Institution of Electrical Engineers (IEE), 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  62. Published

    Calcium ions as second messengers in guard cell signal transduction.

    McAinsh, M. R., Brownlee, C. & Hetherington, A. M., 05/1997, In: Physiologia Plantarum. 100, 1, p. 16-29 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  63. Published

    Binary image compression and coding techniques for HF radio transmission

    Chippendale, P. & Honary, B., 07/1997, HF Radio Systems and Techniques, Seventh International Conference on (Conf. Publ. No. 441). Nottingham, UK: IEEE, p. 130-134 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  64. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  65. Published

    Experimental validation of a large-signal MESFET model for submicron-gate-length devices

    DAgostino, S. & Paoloni, C., 07/1997, In: Microwave and Optical Technology Letters. 15, 4, p. 227-229 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  66. Published

    Three-dimensional vibrations of cross-ply laminated hollow cylinders with clamped edge boundaries

    Ye, J. Q. & Soldatos, K. P., 07/1997, In: Journal of Vibration and Acoustics. 119, 3, p. 317-323 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  67. Published

    Quadratic representation of a nonlinear dynamic stiffness matrix and related eigenvalue problems

    Ye, J. Q. & Williams, F. W., 15/07/1997, In: Computer Methods in Applied Mechanics and Engineering. 146, 3-4, p. 313-323 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  68. Published

    Axisymmetric vibration of laminated annular plates composed of transversely isotropic layers

    Ye, J. Q., 14/08/1997, In: Journal of Sound and Vibration. 205, 2, p. 250-256 7 p.

    Research output: Contribution to journalLetterpeer-review

  69. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  70. Published

    The influence of vegetation species and plant properties on runoff and soil erosion: results from a rainfall simulation study in south east Spain.

    Quinton, J. N., Edwards, G. M. & Morgan, R. P. C., 09/1997, In: Soil Use and Management. 13, 3, p. 143-148 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    Real-time digital simulator (RTDS) and it applications

    Liang, Z., Ma, X., Wang, L., Kuffel, R. & Jiang, X., 10/1997, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 21, 10, p. 61-64 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  72. Published

    Robust PIP control of multivariable stochastic systems

    Taylor, C. J., Chotai, A. & Young, P., 17/10/1997, IEE Colloquium on Robust Control, Digest No. 97/380. Institution of Electrical Engineers (IEE), 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  73. Published

    Advanced bandwidth efficient block coded modulation over fading channels

    Edwards, R., Honary, B., Farquhar, S. & Noble, A., 11/1997, MILCOM 97 Proceedings. Monterey, California: IEEE, Vol. 2. p. 808-811 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  74. Published

    Trellis extracted synchronisation techniques applicable to automatic link establishment

    Hunt, B., Honary, B., Maundrell, M. & Arthur, P., 11/1997, MILCOM 97 Proceedings. Monterey, California: IEEE, p. 43–47 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  75. Published

    Reconfigurable smart sensors for dependable systems

    Sharif, E., Richardson, A. & Dorey, T., 1/11/1997, Hardware Systems for Dependable Applications (Digest No: 1997/335), IEE Half-Day Colloquium on. IEEE, p. 2/1 -2/6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  76. 1998
  77. Published

    A design for testability study on a high performance automatic gain control circuit.

    Lechner, A., Richardson, A. M. D., Hermes, B. & Ohletz, M., 1998, Proceedings of the 16th IEEE VLSI test symposium. IEEE, p. 376-385 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  78. Published

    A knowledge based mechatronics approach to controller design.

    Bradshaw, A. & Counsell, J. M., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1723-1727 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  79. Published

    An approach to realistic fault prediction and layout design for testability in analog circuits

    Prieto, J. A., Rueda, A., Grout, I., Peralias, E., Huertas, J. L. & Richardson, A. M. D., 1998, Design, Automation and Test in Europe, 1998 Proceedings. LOS ALAMITOS: IEEE COMPUTER SOC, p. 905-909 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Published

    An approach to realistic fault prediction and layout design for testability in analogue circuits.

    Prieto, J., Richardson, A. M. D., Rueda, A. & Grout, I., 1998, Proceedings of the conference on design, automation and test in Europe. Paris, p. 906-912 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  81. Published

    An integrated diagnostic reconfiguration (IDR) technique for fault tolerant mixed signal microsystems.

    Sharif, E., Dorey, A. P. & Richardson, A. M. D., 1998, Proceedings of the IEEE international circuits and systems symposium. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  82. Published

    Analysis of in vitro reaction layers formed on Bioglass® using thin- film X-ray diffraction and ATR-FTIR microspectroscopy

    Rehman, I., Knowles, J. C. & Bonfield, W., 1998, In: Journal of Biomedical Materials Research Part A. 41, 1, p. 162-166 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  83. Published

    Cation recognition by self-assembled layers of novel crown-annelated tetrathiafulvalenes.

    Moore, A. J., Goldenberg, L. M., Bryce, M. R., Petty, M. C., Monkman, A. P., Marenco, C., Yarwood, J., Joyce, M. J. & Port, S. N., 1998, In: Advanced Materials. 10, 5, p. 395-398 4 p.

    Research output: Contribution to journalJournal article

  84. Published

    Clock switching: a new design for current test (DcT) method for dynamic logic circuits

    Rosing, R., Richardson, A. M. D., Kerkhoff, A. & Acosta, A., 1998, IDDQ Testing, 1998. Proceedings. 1998 IEEE International Workshop on. IEEE, p. 20-25 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  85. Published

    Comparison of PI and PDF controls of a manipulator arm.

    Nagy, Z. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 739-744 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  86. Published

    Continuous time Proportional-Integral-Plus (PIP) control with filtering polynomials.

    Taylor, C. J., Chotai, A. & Young, P. C., 1998, Proceedings of the UKACC International Conference on Control. Institution of Electrical Engineers Conference Publication No. 455, Vol. 2. p. 1391-1396 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  87. Published

    DACCORD: integrated and co-ordinated control.

    Kotsialos, A., Ellouni, N., Middelham, F., van Schuppen, J. & Taylor, C. J., 1998, 8th World Conference on Transportation Research. Pergamon

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  88. Published

    Decay rate of boundary effects in laminated composite cylinders and cylindrical panels.

    Ye, J., 1998, Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  89. Published

    Design for testability strategies for a high performance gain control circuit.

    Lechner, A., Richardson, A. M. D., Hermes, B. & Perkins, A., 1998, Proceedings of the international IEEE mixed signal test workshop. The Hague

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  90. Published

    Design for testability strategies for mixed signal and analogue designs: from layout to system.

    Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  91. Published

    Development of a safety manager for an autonomous mobile robot.

    Pace, C. & Seward, D., 1998, Proceedings of the 29th international symposium on robotics 1998: advanced robotics beyond 2000. Birmingham, p. 277-282 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  92. Published

    Development of sensor arrays for electromagnetic tomography: compensation of large background signal values.

    Yu, Z. Z. & Peyton, A. J., 1998, In: Transactions of the Institute of Measurement and Control. 20, 4, p. 195-202 8 p.

    Research output: Contribution to journalJournal article

  93. Published

    Developments in the piling process through advances in technology

    Findlay, J. D., Seward, D. W., Mure, J. N. & Scott, J., 1998, The value of geotechnics in construction. London: Institution of Civil Engineers, 359 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  94. Published

    Effect of heat treatment on pulsed laser deposited amorphous calcium phosphate coatings

    García, F., Arias, J. L., Mayor, B., Pou, J., Rehman, I., Knowles, J., Best, S., León, B., Pérez-Amor, M. & Bonfield, W., 1998, In: Journal of Biomedical Materials Research Part A. 43, 1, p. 69-76 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  95. Published

    Elastic large deflection analysis of stiffened annular sector plates.

    Turvey, G. J. & Salehi, M., 1998, In: International Journal of Mechanical Sciences. 40, 1, p. 51-70 20 p.

    Research output: Contribution to journalJournal article

  96. Published

    Electromagnetic inductance tomography (EMT): sensor, electronics and image reconstruction for a system with a rotatable parallel excitation.

    Yu, Z. Z., Peyton, A. J., Xu, L. A. & Beck, M. S., 1998, In: IEE Proceedings Science Measurement and Technology. 145, 1, p. 20-25 6 p.

    Research output: Contribution to journalJournal article

  97. Published

    Frame connections.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  98. Published

    Integrating the business process with automation through object technology in a foundation company.

    Mure, N., Scott, J. N., Seward, D. W. & Quayle, S. D., 1998, Proceedings of ECPPM'98 - the Second European Conference on Product and Process Modelling in the Building Industry. BRE, 581 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  99. Published

    Knowledge representation for mechatronic systems.

    Porter, I., Counsell, J. M. & Shao, J., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 181-196 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  100. Published

    Managing the imagination.

    Joyce, M. J., 1998, In: Third Millennium Magazine. Spring

    Research output: Contribution to journalJournal article

  101. Published

    Non-linear controller design for a highly coupled VSTOL aircraft.

    Bennett, D., Burge, S. E. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1510-1515 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  102. Published

    Plate-to-plate mechanical: part II: testing and applications.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

Previous 1 2 3 4 5 6 7 8 ...51 Next

Back to top