Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    "Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".

    Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  2. Published

    "Supercritical carbon dioxide in water" emulsion-templated synthesis of porous calcium alginate hydrogels

    Partap, S., Rehman, I., Jones, J. R. & Darr, J. A., 2006, In: Advanced Materials. 18, 4, p. 501-504 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  3. Published

    (Ethyl lactate)-gel high pressure CO2 extraction for the processing of mesoporous gelatine particles

    Paninho, A. B., Barbosa, C., Nogueira, I. D., Najdanovic-Visak, V. & V. M. Nunes, A., 11/2013, In: Journal of Supercritical Fluids. 83, p. 35–40 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  4. Published

    (Hydroxypropyl)methylcellulose mediated synthesis of highly porous composite scaffolds for trabecular bone repair applications

    Khan, A. F., Afzal, A., Chaudhary, A. A., Saleem, M., Shahzadi, L., Jamal, A., Yar, M., Habib, A. & Rehman, I. U., 1/06/2015, In: Science of Advanced Materials. 7, 6, p. 1177-1186 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  5. Unpublished

    (Invited Lecture) Advise to the Greek government on renewable energy issues, Hon. George Vagionas MP

    Aggidis, G. A., 2005, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  6. Unpublished

    (Invited) Advances and results towards super-efficient klystrons

    Lingwood, C. J., 2016, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  7. Published

    (INVITED) All solution processed metal oxide-based Thin Film Transistors for CMOS technologies

    Adamopoulos, G., 08/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  8. Unpublished

    (Invited) Development of klystrons with ultimately high - 90% RF power production efficiency

    Lingwood, C. J., 24/03/2015, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  9. Unpublished

    (Invited) Development of the high efficiency MBK klystron for FCC

    Lingwood, C. J., 21/01/2016, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  10. Unpublished

    (Invited) High-power, high-efficiency klystrons

    Lingwood, C. J., 4/11/2015, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  11. Unpublished

    (Invited) Klystrons

    Lingwood, C. J., 1/03/2016, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  12. Published
  13. Published
  14. Published
  15. Published
  16. Published

    (INVITED) Solution Processed SiO2 and high-k Dielectrics for MO-based CMOS TFTs

    Adamopoulos, G., 12/10/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  17. Published

    (INVITED) Solution-processed metal oxide-based CMOS

    Adamopoulos, G., 15/10/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  18. Published
  19. Published

    0.22 THz TWT based on the double corrugated waveguide

    Paoloni, C. & Mineo, M., 04/2014, 15th IEEE International Vacuum Electronic Conference. Piscataway, N.J.: IEEE, p. 227-228 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  20. Published

    1.55μm Efficient Temperature Insensitive GaSb-based Lasers for Telecoms Applications

    Bentley, M., 2021, Lancaster University. 165 p.

    Research output: ThesisDoctoral Thesis

  21. Published

    100 % amplitude modulation of an external cavity terahertz QCL using an optoelectronic chopper based on metamaterials and graphene

    Kindness, S. J., Jessop, D. S., Wei, B., Wallis, R., Kamboj, V. S., Xiao, L., Ren, Y., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. A. & Degl'lnnocenti, R., 29/06/2017, 2017 European Conference on Lasers and Electro-Optics and European Quantum Electronics Conference. OSA - The Optical Society, CB_2_4. (Optics InfoBase Conference Papers; vol. Part F82-CLEO_Europe 2017).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  22. Published

    1-THz Cascade Backward Wave Amplifier

    Paoloni, C., Mineo, M., Di Carlo, A., Durand, A. J., Krozer, V., Kotiranta, M., Bouamrane, F., Bouvet, T. & Megtert, S., 1/04/2012, Vacuum Electronics Conference (IVEC), 2012 IEEE Thirteenth International . IEEE, p. 237-238 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    2D Analysis of Multimode Photonic Crystal Resonant Cavities with the Finite Volume Time Domain Method

    Pinto, D. & Obayya, S., 2008, In: Optical and Quantum Electronics. 40, 11-12, p. 875-890 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  24. Published

    2-D and 3-D Integration of Heterogeneous Electronic Systems under Cost, Performance and Technological Constraints

    Weerasekera, R., Pamunuwa, D., Zheng, L-R. & Tenhunen, H., 08/2009, In: IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 28, 8, p. 1237-1250 14 p.

    Research output: Contribution to journalJournal article

  25. Published

    2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization

    Chi, Y., Huang, B., Saafi, M., Fullwood, N., Lambert, C., Whale, E., Hepworth, D. & Ye, J., 13/09/2021, In: Construction and Building Materials. 299, 23 p., 123867.

    Research output: Contribution to journalJournal articlepeer-review

  26. Published

    2D finite element analysis of thermally bonded nonwoven materials: continuous and discontinuous models

    Hou, X., Acar, M. & Silberschmidt, V., 09/2009, In: Computational Materials Science. 46, 3, p. 700–707 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  27. E-pub ahead of print

    2-D Mxene flakes as potential replacement for both TCO and Pt layers for Dye-Sensitized Solar cell

    Ahmad, M. S., Pandey, A. K., Abd Rahim, N., Aslfattahi, N., Mishra, Y. K., Rashid, B. & Saidur, R., 30/06/2021, In: Ceramics International.

    Research output: Contribution to journalJournal articlepeer-review

  28. Published

    2-D particle-in-cell simulations of high efficiency klystrons

    Constable, D., Lingwood, C. J., Burt, G. C., Syratchev, I., Baikov, A. Y., Marchesin, R. & Kowalczyk, R., 19/04/2016, Proceedings of the 17th IEEE International Vacuum Electronics Conference (IVEC 2016). IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  29. Published

    346 GHz BWO for fusion plasma diagnostics

    Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  30. Published

    346 GHz source for plasma diagnostic applications

    Barchfeld, R., Popovic, B., Tang, X., Yue, L., Zhang, F., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  31. Published

    3D Analysis of Plasmonic Waveguides Using a Fourth-Order Accurate Finite Difference Subsampling Technique

    B.Hu, P. Sewell, J. Wykes, A. Vukovic, J. J. Lim and T. Benson, 2006.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  32. Published

    3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method

    Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 05/2000, In: Journal of the Mechanics and Physics of Solids. 48, 5, p. 1037-1063 27 p.

    Research output: Contribution to journalJournal articlepeer-review

  33. Forthcoming

    3D Meander Line Slow Wave Structure for W-band TWT

    Socuellamos, J., Letizia, R., Dionisio, R. & Paoloni, C., 29/01/2020, (Accepted/In press) Proceedings 21th International Vacuum Electronics Conference. Springer, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  34. Published
  35. Published

    3D Motion Control of Connected Augmented Virtuality on Mobile Phones.

    Chehimi, F., Coulton, P. & Edwards, R., 10/07/2008, Proceedings of the 2008 International Symposium on Ubiquitous Virtual Reality. Gwangju: IEEE Computer Society, p. 67-70 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  36. Published

    3D printed facial laser scans for the production of localised radiotherapy treatment masks

    Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  37. Published

    3-D simulation of a soft-landing tilted electric field collector for linear beam tubes.

    Kumar, L. & Carter, R. G., 12/1996, Proceedings of the Asia-Pacific microwave conference. New Delhi

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  38. Published

    3-D simulation of asymmetric multistage depressed collectors with secondary electron emission effects for high efficiency space TWTs

    Ghosh, T. K. & Carter, R. G., 1/01/2001, In: ITG-Fachbericht. 165, p. 67-71 5 p.

    Research output: Contribution to journalConference articlepeer-review

  39. Published

    3-D simulation of asymmetric multi-stage depressed collectors with secondary electron emission effects for high efficiency space TWTs.

    Ghosh, T. K. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  40. Published

    3DB challenge for DfT, DfM, DOT and BIST integration into analogue and mixed signal ICs.

    Lechner, A., Burbidge, M. J., Richardson, A. M. D. & Hermes, B., 2001, Proceedings of the 2nd Latin-American test workshop (LATW ’01). p. 194-199 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  41. Published

    3-Dimensional simulation of multistage depressed collectors on microcomputers.

    Kumar, L., Spadtke, P., Carter, R. G. & Perring, D., 09/1995, In: IEEE Transactions on Electron Devices. 42, 9, p. 1663-1673 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  42. Published

    71 – 76 GHz Traveling Wave Tube for High Data Rate Satellite Communication

    Li, X., Huang, X., Letizia, R. & Paoloni, C., 9/02/2018, IVEC 2017 - 18th International Vacuum Electronics Conference. IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  43. Published

    A 0.35 THz Extended Interaction Oscillator based on Overmoded and Bi-Periodic Structure

    Xu, C., Meng, L., Paoloni, C., Qin, Y., Bin, L., Wang, B., Li, H. & Yin, Y., 30/11/2021, In: IEEE Transactions on Electron Devices. 68, 11, p. 5814-5819 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  44. Published

    A 16-channel real-time digital processor for pulse-shape discrimination in multiplicity assay

    Joyce, M., Aspinall, M., Cave, F. & Lavietes, A., 06/2013, Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 2013 3rd International Conference on. Piscataway, N.J.: IEEE, p. 1-5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  45. Published

    A 16-channel real-time digital processor for pulse-shape discrimination in multiplicity assay

    Joyce, M., Aspinall, M., Cave, F. & Lavietes, A., 08/2014, In: IEEE Transactions on Nuclear Science. 61, 4, p. 2222-2227 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  46. Published

    A 2D electro-mechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 2015, In: Biomed Research International. 2015, 12 p., 854953.

    Research output: Contribution to journalJournal articlepeer-review

  47. Published

    A 2D Electromechanical Model of Human Atrial Tissue Using the Discrete Element Method

    Brocklehurst, P., Adeniran, I., Yang, D., Sheng, Y., Zhang, H. & Ye, J., 25/10/2015, In: Biomed Research International. 2015, 13 p., 854953.

    Research output: Contribution to journalJournal articlepeer-review

  48. Published

    A 2–dimensional Hammerstein model for heating and ventilation control of conceptual thermal zones

    Tsitsimpelis, I. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  49. Published

    A 3D BEM modelling of body-scanning MIT system.

    Pham, M. . H. & Peyton, A. J., 2004, Proceedings of the XII international conference on electrical bio-impedance.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  50. Published

    A 3D imaging system for measuring the shape and volume of the human body.

    Wan-Daud, W. A., Tapp, H. S., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 358-363 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  51. Published

    A 3D inverse finite element technique applied to experimental magnetic induction tomography data.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  52. Published

    A 4-channel multiplex analyzer for real-time, parallel processing of fast scintillators

    Joyce, M. J., Gamage, K. A. A., Aspinall, M. D., Cave, F. D. & Lavietes, A., 2012, IEEE Nuclear Science Symposium and Medical Imaging Conference Record (NSS/MIC). IEEE, p. 134-138 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  53. Published

    A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture

    Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  54. Published

    A bio-hybrid tactile sensor incorporating living artificial skin and an impedance sensing array

    Cheneler, D., Buselli, E., Camboni, D., Anthony, C., Grover, L., Adams, M. J. & Oddo, C., 10/12/2014, In: Sensors. 14, 12, p. 23781-23802 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  55. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to journalMeeting abstractpeer-review

  56. Published

    A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures

    Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  57. Published

    A Brownian Dynamics Simulation of Enzyme-Substrate Encounters at the Surface of a Colloidal Particle

    Dickinson, E. & Honary, F., 1986, In: Journal of the Chemical Society. Faraday Transactions Part 2. 82, p. 719-727 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  58. Published

    A built-in test solution for a SMART silicon micromachined resonant pressure sensor.

    Jeffery, C., Rosing, R. & Richardson, A. M. D., 2000, IEEE European Test Workshop. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  59. Published

    A capacitance and optical method for the static and dynamic characterization of micro electro mechanical systems (MEMS) devices.

    Richardson, A. M. D., Ferraris, E., Fassi, I., De Masi, B. & Rosing, R., 1/09/2006, In: Microsystem Technologies. 12, 10-11, p. 1053-1061 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  60. Published

    A Case Study of Fractional-Order Control

    Alarfaj, Y., 1/09/2021, Lancaster University. 179 p.

    Research output: ThesisDoctoral Thesis

  61. Published

    A case study of using cosmic ray muons to monitor supercritical CO2 migration in geological formations

    Zhong, J. & Jiang, X., 1/01/2017, In: Applied Energy. 185, 2, p. 1450-1458 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  62. Published

    A CFD model of laser cladding: From deposition head to melt pool dynamics

    Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  63. Published

    A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, In: Physics Procedia. 5, B, p. 337-346 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  64. Published

    A chemical kinetic modelling study of the combustion of CH4–CO–H2–CO2 fuel mixtures

    Fischer, M. C. P. & Jiang, X., 05/2016, In: Combustion and Flame. 167, p. 274-293 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  65. Published

    A co-harmonic cyclotron resonance maser device for plasma applications

    Constable, D. A., Ronald, K., He, W., Phelps, A. D. R. & Cross, A. W., 12/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  66. Published

    A co-harmonic cyclotron resonant maser

    Constable, DA., 30/03/2009. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  67. Published

    A co-harmonic gyro-monotron with a novel corrugated interaction cavity

    Constable, DA., Ronald, K., Phelps, A. D. R., He, W., Cross, A. W., Savilov, A. V., Bratman, V. L., Bandurkin, I. V., McConville, S. L. & Konoplev, I. V., 26/02/2009, IET Conference on High Power RF Technologies. IET Press, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  68. Published

    A co-harmonic gyro-oscillator with a novel interaction cavity

    Constable, D. A., Ronald, K., Phelps, A. D. R., He, W., Cross, A. W., McConville, S. L., Konoplev, I. V., Bandurkin, I. V., Savilov, A. V. & Bratman, V. L., 2009, Vacuum Electronics Conference, 2009. IVEC '09. IEEE International. IEEE, p. 233-234 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  69. Published

    A combined digital camera – EMT system to measure human body composition.

    Tapp, H. S., Goss, D., Mackin, R. O., Crescenzo, E., Wan-Daud, W. A., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 384-390 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  70. Published

    A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Castillo, P. E. J. R. D. D. & Zwaag, S. V. D., 04/2009, In: Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  71. Published

    A compact and efficient multi-mode antenna for parallel transmission of 7T magnetic resonance imaging

    Pitman, S. & Hu, J., 11/2013, 2013 Loughborough Antennas & Propagation Conference. Loughborough, UK: IEEE, p. 534-538 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  72. Published

    A comparative approach to the economic modelling of a large-scale wave power scheme

    Stallard, T., Rothschild, R. & Aggidis, G., 2008, In: European Journal of Operational Research. 185, 2, p. 884-898 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  73. Published

    A comparative finite elemental analysis of glass abutment supported and unsupported cantilever fixed partial denture

    Ramakrishaniah, R., Al Kheraif, A. A., Elsharawy, M. A., Alsaleh, A. K., Ismail Mohamed, K. M. & Rehman, I. U., 2015, In: Dental Materials. 31, 5, p. 514-521 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  74. Published

    A comparative investigation on various platinum nanoparticles decorated carbon supports for oxygen reduction reaction

    Narasimulu, A. A., Singh, D. K., Soin, N., Gupta, G., Geng, J., Zhu, Z. & Luo, J. K., 30/04/2017, In: Current Nanoscience. 13, 2, p. 136-148 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  75. Published

    A comparative production and characterisation of fast pyrolysis bio-oil from Populus and Spruce woods

    Echresh Zadeh, Z., Abdulkhani, A. & Saha, B., 1/01/2021, In: Energy. 214, 12 p., 118930.

    Research output: Contribution to journalJournal articlepeer-review

  76. Published

    A comparative RANS/LES study of transient gas jets and sprays under diesel conditions

    Valentino, M., Jiang, X. & Zhao, H., 2007, In: Atomization and Sprays. 17, 5, p. 451-472 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  77. Published

    A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios

    Jeong, Y., Barlat, F., Tomé, C. N. & Wen, W., 1/06/2017, In: International Journal of Plasticity. 93, p. 212-228 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  78. Published

    A comparative study of different stable identification techniques using frequency domain subspace identification methods for a flexible plate

    Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 2011, p. 833-836. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  79. Published

    A Comparative Study of Diffusion Coefficients from Convective and IR Drying of Woodchip

    Pryce, M., Cheneler, D., Martin, A. & Aiouache, F., 16/11/2020, In: Journal of Fluid Flow, Heat and Mass Transfer. 7, p. 66-72 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  80. Published

    A comparative study of instabilities in forced reacting plumes of nonpremixed flames

    Jiang, J., Jing, L., Zhu, M. & Jiang, X., 08/2016, In: Journal of the Energy Institute. 89, 3, p. 456-467 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  81. Published

    A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders

    Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  82. Published

    A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  83. Published

    A comparative study of psychological morbidity in women with screen detected and symptomatic breast cancer.

    Farmer, A., Payne, S. & Royle, G., 1995, Nursing research in cancer care. Richardson, A. & Wilson-Barnett, J. (eds.). London: Scutari Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  84. Published

    A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V

    Chen, H-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  85. Published

    A comparative study of wave energy technologies, public workshop: ‘making waves: the economic and social impacts of marine renewables.

    Aggidis, G. A., Bradshaw, A., French, M. J., McCabe, A. P., Meadowcroft, J. A. C. & Widden, M. B., 2005, Proceedings of the EPSRC SuperGen marine energy research consortium.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  86. Published

    A comparative study of wave energy technologies, public workshop: making waves: the economic and social impacts of marine renewables. (Invited paper)

    Aggidis, G. A., Stallard, T. J. & Rothschild, R., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  87. Published

    A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 2005, In: Applied Surface Science. 247, 1-4, p. 268-276 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  88. Published

    A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings

    Yuan, W., Li, R., Chen, Z., Gu, J. & Tian, Y., 15/01/2021, In: Surface and Coatings Technology. 405, 13 p., 126582.

    Research output: Contribution to journalJournal articlepeer-review

  89. Published

    A comparative study on the aqueous photodegradation of two organophosphorus pesticides under simulated and natural sunlight.

    Weber, J., Halsall, C. J., Wargent, J. J. & Paul, N. D., 2009, In: Journal of Environmental Monitoring. 11, 3, p. 654-659 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  90. Published

    A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  91. Unpublished

    A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050

    Appleby, M., Lambert, C. & Rennie, A., 12/2009, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  92. Published

    A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators

    Akurugoda Gamage, K. & Joyce, M., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  93. Published

    A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators

    Gamage, K., Joyce, M. & Taylor, G., 08/2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1432-1437 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  94. Published

    A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  95. Published

    A comparison of four different digital algorithms for pulse-shape discrimination in fast scintillators.

    Gamage, K. A. A., Joyce, M. & Hawkes, N. P., 21/06/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 642, 1, p. 78-83 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  96. Published

    A comparison of Geant4 and MCNP for modelling liquid scintillators

    Balmer, M., Gamage, K. & Taylor, G., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  97. Published

    A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders

    Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, PJ., DeLemos, ACS., Tojeira, APO., Pereira, AMH., Mateus, AJ., Mendes, ALA., DosSantos, C., Freitas, DMF., Bartolo, HM., Almeida, HD., IM, D., Dias, JR., Domingos, MAN., Alves, NMF., Pereira, RFB., Patricio, TMF. & Ferreira, TMD. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  98. Published

    A comparison of MCNP6-1.0 and GEANT 4-10.1 when evaluating the neutron output of a complex real world nuclear environment: the thermal neutron facility at the Tri Universities Meson facility

    Monk, S. D., Shippen, A., Colling, B. R., Cheneler, D., Al Hamrashdi, H. & Alton, T., 15/05/2017, In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 399, p. 48-61 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  99. Published

    A comparison of models of the isometric force of locust skeletal muscle in response to pulse train inputs

    Wilson, E. D., Rustighi, E., Newland, P. L. & Mace, B. R., 03/2012, In: Biomechanics and modeling in mechanobiology. 11, 3-4, p. 519–532 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  100. Published

    A comparison of plutonium abundance in soil from sites in the United Kingdom measured with high-efficiency, high-resolution γ-ray spectroscopy, neutron assay and accelerator mass spectrometry

    Tighe, C., Christl, M., Degueldre, C., Andrew, J. & Joyce, M. J., 9/09/2018, Plutonium Futures: The Science 2018. San Diego: American Nuclear Society, p. 158-160 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  101. Published

    A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting

    Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.

    Research output: Contribution to journalJournal articlepeer-review

  102. Published

    A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material

    Zakir, M., Kheraif, A. A. A. A., Asif, M., Wong, F. S. L. & Rehman, I. U., 2013, In: Dental Materials. 29, 4, p. e53-e59

    Research output: Contribution to journalJournal articlepeer-review

  103. Published

    A Comparison of γ-ray Spectroscopy with Accelerator Mass Spectrometry for the Environmental Assay of Plutonium

    Joyce, M. J., Tighe, C., Campbell, I., Christl, M., Degueldre, C., Iridoy, M. C., Semple, K. T. & Andrew, J., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  104. Published

    A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In: Journal of Materials Science. 48, 24, p. 8493-8500 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  105. Published

    A Comprehensive Business Model for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  106. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to journalJournal articlepeer-review

  107. Published

    A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts

    Farooqi, A. S., Yusuf, M., Mohd Zabidi, N. A., Saidur, R., Sanaullah, K., Khan, A. & Abdullah, B., 1/09/2021, In: International Journal of Hydrogen Energy. 46, 60, p. 31024-31040 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  108. Published

    A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.

    Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  109. Published

    A computational study of preferential diffusion and scalar transport in nonpremixed hydrogen-air flame

    Jiang, J., Jiang, X. & Zhu, M., 7/12/2015, In: International Journal of Hydrogen Energy. 40, 45, p. 15709-15722 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  110. Published

    A computationally efficient adaptive IIR solution to active noise and vibration control systems

    Montazeri, A. & Poshtan, J., 11/2010, In: IEEE Transactions on Automatic Control. 55, 11, p. 2671-2676 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  111. Published

    A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)

    Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  112. Published

    A computer-controlled dynamic phantom for respiratory-gated medical radiotherapy research

    Bandala Sánchez, M. & Joyce, M., 07/2013, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences . E96-A, 7, p. 1609-1616 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  113. Published

    A conceptual study for a computer-based tool to support electronics design in a mechatronic environment.

    Bradley, D. A., Walters, R. M. & Dorey, A. P., 2000, In: Microprocessors and Microsystems. 24, 2, p. 51-61 11 p.

    Research output: Contribution to journalJournal article

  114. Published

    A condition monitoring system for an early warning of developing faults in wind turbine electrical systems

    Ma, X., Cross, P. & Qian, P., 1/12/2016, In: Insight – Non-Destructive Testing and Condition Monitoring. 58, 12, p. 663-670 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  115. Published

    A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., Rivera-Díaz-del-Castillo, P. E. J., Bouaziz, O. & van der Zwaag, S., 09/2009, In: Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  116. Published

    A control system for a new wave energy converter in irregular wave climates.

    Aggidis, G. A., Rahmati, M. T., Chaplin, R. V., McCabe, A. P., Mingham, C. G., Causon, D. M. & Bhinder, M. A., 06/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  117. Published

    A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  118. Published

    A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite

    Greco, A. & Jiang, X., 31/05/2016, In: Journal of Power Sources. 315, p. 127-139 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  119. Published

    A creativity aid for designers.

    French, M. J., Chaplin, R. V. & Langdon, P. M., 1993, Proceedings of ICED '93. Zurich: Heurista

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  120. Published

    A criterion for the formation of high entropy alloys based on lattice distortion

    Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/04/2016, In: Intermetallics. 71, p. 76-87 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  121. Published

    A Data-Driven Statistical Approach for Monitoring and Analysis of Large Industrial Processes

    Montazeri, A., Ansarizadeh, M. H. & Arefi, M., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2354-2359 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  122. Unpublished

    A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads

    Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.

    Research output: ThesisDoctoral Thesis

  123. Published

    A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads

    Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  124. Published

    A Dependable Microelectronic Peptide Synthesizer Using Electrode Data

    Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.

    Research output: Contribution to journalJournal articlepeer-review

  125. Published

    A design for testability study on a high performance automatic gain control circuit.

    Lechner, A., Richardson, A. M. D., Hermes, B. & Ohletz, M., 1998, Proceedings of the 16th IEEE VLSI test symposium. IEEE, p. 376-385 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  126. Published

    A design-for-test structure for optimising analogue and mixed signal IC test

    Bratt, A., Richardson, A. M. D., Harvey, R. & Dorey, A. P., 03/1995, European Design and Test Conference. IEEE, p. 24-33 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  127. Published

    A detailed thermodynamic analysis of [C(4)mim][BF4] plus water as a case study to model ionic liquid aqueous solutions

    Rebelo, LPN., Najdanovic-Visak, V., Visak, Z. P., da Ponte, MN., Szydlowski, J., Cerdeirina, CA., Troncoso, J., Romani, L., Esperanca, JMSS., Guedes, HJR. & de Sousa, HC., 2004, In: Green Chemistry. 6, 8, p. 369-381 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  128. Published

    A digital approach to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator detector

    Gamage, K., Joyce, M. & Taylor, G., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1223-1227 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  129. Published

    A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.

    Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691

    Research output: Contribution to journalJournal articlepeer-review

  130. Published

    A digital partial built-in self-test structure for a high performance automatic gain control circuit

    Lechner, A., Ferguson, J., Richardson, A. & Hermes, B., 1999, DESIGN, AUTOMATION AND TEST IN EUROPE CONFERENCE AND EXHIBITION 1999, PROCEEDINGS. Borrione, D. & Ernst, R. (eds.). LOS ALAMITOS: IEEE COMPUTER SOC, p. 232-238 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  131. Published

    A dual-arm, hydraulically-actuated robot for operations within radiological environments

    Albrecht, O., Monk, S. D., Bandala Sanchez, M., Montazeri, A. & Taylor, J., 1/10/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  132. Published

    A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences

    Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  133. Published

    A dynamic model of the jump-to phenomenon during AFM analysis

    Bowen, J. & Cheneler, D., 18/12/2012, In: Langmuir. 28, 50, p. 17273-17286 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  134. Published

    A European Project on Vacuum Tube Amplifiers for THz Amplification

    Paoloni, C., Di Carlo, A., Brunetti, F., Mineo, M., Ulisse, G., Durand, A. J., Krozer, V., Kotiranta, M., Rossi, A., Dolfi, D., Legagneux, P., Fiorello, A. M., Dispenza, M., Secchi, A., Zhurbenko, V., Megtert, S., Boumrane, F., Bouvet, T., Cojocaru, C. -S. & Gohier, A., 09/2012, 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. China

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  135. Published

    A facile analytical method for reliable selectivity examination in cofactor NADH regeneration

    Saba, T., Burnett, J. W. H., Li, J., Kechagiopoulos, P. N. & Wang, X., 25/01/2020, In: Chemical Communications. 56, 8, p. 1231-1234 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  136. Published

    A failure mode analysis of a 6-bit folding ADCs.

    Lechner, A., Richardson, A. M. D., Burbidge, M. & Hermes, B., 2001, Proceedings of the 7th IEEE international mixed-signal testing workshop (IMSTW ’01). p. 19-23 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  137. Published

    A fast and portable imager for neutron and gamma emitting radionuclides

    Al Hamrashdi, H., Cheneler, D. & Monk, S. D., 11/02/2020, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 953, 31 p., 163253.

    Research output: Contribution to journalJournal articlepeer-review

  138. Published

    A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR

    Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  139. Published

    A fast large-signal model for coupled-cavity TWTS.

    Srivastava, V. & Carter, R. G., 11/1988, In: IEEE Transactions on Electron Devices. 35, 11, Pa, p. 2068-2076 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  140. Published

    A fast model of a 1-D nonlinear beam-wave interaction for a 225 GHz TWT

    Waring, R., Hu, Y. & Paoloni, C., 14/09/2015, 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT). IEEE, p. 1-3 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  141. Published

    A Fast Model of a 1-D Nonlinear Beam-Wave Interaction for a 225GHz TWT

    Waring, R., Hu, Y. & Paoloni, C., 23/06/2015, 8th UK-Europe-China Workshop on mm-waves and THz Technologies . IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  142. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  143. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  144. Published

    A fault-tolerant MEF peptide synthesizer using control and direct sensing electrodes employing current and impedance tests

    Zhang, X., Kerkhoff, H. G., Mailly, F., Nouet, P., Liu, H. & Richardson, A., 1/06/2007, 13th International mixed signals testing workshop and 3rd international GHz/Gbps test workshop, Póvoa de Varzim, Portugal. Portugal: University of Porto, p. 176-181 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  145. Published

    A feasibility study into the use of wavelet transform in partial discharge analysis.

    Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  146. Published

    A field-portable, laser-diode spectrometer for the ultra-sensitive detection of hydrocarbon gases

    Gibson, G., Monk, S. D. & Padgett, M., 04/2002, In: Journal of Modern Optics. 49, 5-6, p. 769-776 8 p.

    Research output: Contribution to journalJournal article

  147. Published

    A finite-element 3-D method for the design of TWT collectors

    D'Agostino, S. & Paoloni, C., 20/07/2000, In: Microwave and Optical Technology Letters. 26, 2, p. 119-122 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  148. Published

    A first comparison of irregularity and ion drift velocity measurements in the E-region

    Makarevich, R. A., Honary, F., Howells, V. S. C., Koustov, A. V., Milan, S. E., Davies, J. A., Senior, A., McCrea, I. W. & Dyson, P. L., 09/2006, In: Annales Geophysicae. 24, 9, p. 2375-2389 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  149. Published

    A flexible real-time transputer based control system.

    Nagy, Z. & Bradshaw, A., 1996, Proceedings of the 5th UK mechatronics forum international conference. Portugal

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  150. Published

    A flexible streaming software architecture for scientific instruments

    Grill, M., Barratt, K. & Honary, F., 13/02/2010, In: Earth Science Informatics. p. 1-7 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  151. Published

    A flexible, transputer based robot control.

    Nagy, Z. & Bradshaw, A., 1996, Proceedings of the international workshop on advanced robotics and intelligent machines. Manchester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  152. Published

    A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium.

    Bissessur, Y. & Peyton, A. J., 2002, Proceedings of the 2nd international symposium on process tomography.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  153. Published

    A framework for defining sustainable energy transitions: principles, dynamics, and implications

    Sgouridis, S. & Csala, D., 2/05/2014, In: Sustainability. 6, 5, p. 2601-2622 22 p.

    Research output: Contribution to journalJournal articlepeer-review

  154. Published

    A framework of design weakness detection through machine health monitoring for the evolutionary design optimization of multi-domain systems

    Xia, M. & De Silva, C. W., 15/10/2014, Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014. Institute of Electrical and Electronics Engineers Inc., p. 205-210 6 p. 6926455. (Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  155. Unpublished

    A Frequency-Response Design Method for the Control of Wave Energy Converters in Irregular Seas.

    McCabe, A. P., Stables, M. A. & Aggidis, G. A., 2010, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  156. Published

    A Fuzzy Data-Driven Paradigmatic Predictor

    Amirjavid, F., Nemati, H. & Barak, S., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2366-2371 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  157. Published

    A Fuzzy Paradigmatic Clustering Algorithm

    Amirjavid, F., Barak, S. & Nemati, H., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2360-2365 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  158. Published

    A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition

    Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  159. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 28/06/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  160. Published

    A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator

    West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 2016, In: IFAC-PapersOnLine. 49, 12, p. 1261-1266 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  161. Published

    A global wire planning scheme for Network-on-Chip.

    Liu, J., Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03.. Vol. 4. p. IV-892-IV-895

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  162. Published

    A global-scale screening of non-native aquatic organisms to identify potentially invasive species under current and future climate conditions

    Vilizzi, L., Copp, G. H., Hill, J. E., Adamovich, B., Aislabie, L., Akin, D., Al-Faisal, A. J., Almeida, D., Azmai, M. N. A., Bakiu, R., Bellati, A., Bernier, R., Bies, J. M., Bilge, G., Branco, P., Bui, T. D., Canning-Clode, J., Cardoso Ramos, H. A., Castellanos-Galindo, G. A., Castro, N. & 176 others, Chaichana, R., Chainho, P., Chan, J., Cunico, A. M., Curd, A., Dangchana, P., Dashinov, D., Davison, P. I., de Camargo, M. P., Dodd, J. A., Durland Donahou, A. L., Edsman, L., Ekmekçi, F. G., Elphinstone-Davis, J., Erős, T., Evangelista, C., Fenwick, G., Ferincz, Á., Ferreira, T., Feunteun, E., Filiz, H., Forneck, S. C., Gajduchenko, H. S., Gama Monteiro, J., Gestoso, I., Giannetto, D., Gilles A.S., J., Gizzi, F., Glamuzina, B., Glamuzina, L., Goldsmit, J., Gollasch, S., Goulletquer, P., Grabowska, J., Harmer, R., Haubrock, P. J., He, D., Hean, J. W., Herczeg, G., Howland, K. L., İlhan, A., Interesova, E., Jakubčinová, K., Jelmert, A., Johnsen, S. I., Kakareko, T., Kanongdate, K., Killi, N., Kim, J-E., Kırankaya, Ş. G., Kňazovická, D., Kopecký, O., Kostov, V., Koutsikos, N., Kozic, S., Kuljanishvili, T., Kumar, B., Kumar, L., Kurita, Y., Kurtul, I., Lazzaro, L., Lee, L., Lehtiniemi, M., Leonardi, G., Leuven, R. S. E. W., Li, S., Lipinskaya, T., Liu, F., Lloyd, L., Lorenzoni, M., Luna, S. A., Lyons, T. J., Magellan, K., Malmstrøm, M., Marchini, A., Marr, S. M., Masson, G., Masson, L., McKenzie, C. H., Memedemin, D., Mendoza, R., Minchin, D., Miossec, L., Moghaddas, S. D., Moshobane, M. C., Mumladze, L., Naddafi, R., Najafi-Majd, E., Năstase, A., Năvodaru, I., Neal, J. W., Nienhuis, S., Nimtim, M., Nolan, E. T., Occhipinti-Ambrogi, A., Ojaveer, H., Olenin, S., Olsson, K., Onikura, N., O'Shaughnessy, K., Paganelli, D., Parretti, P., Patoka, J., Pavia R.T.B., J., Pellitteri-Rosa, D., Pelletier-Rousseau, M., Peralta, E. M., Perdikaris, C., Pietraszewski, D., Piria, M., Pitois, S., Pompei, L., Poulet, N., Preda, C., Puntila-Dodd, R., Qashqaei, A. T., Radočaj, T., Rahmani, H., Raj, S., Reeves, D., Ristovska, M., Rizevsky, V., Robertson, D. R., Robertson, P., Ruykys, L., Saba, A. O., Santos, J. M., Sarı, H. M., Segurado, P., Semenchenko, V., Senanan, W., Simard, N., Simonović, P., Skóra, M. E., Slovák Švolíková, K., Smeti, E., Šmídová, T., Špelić, I., Srėbalienė, G., Stasolla, G., Stebbing, P., Števove, B., Suresh, V. R., Szajbert, B., Ta, K. A. T., Tarkan, A. S., Tempesti, J., Therriault, T. W., Tidbury, H. J., Top-Karakuş, N., Tricarico, E., Troca, D. F. A., Tsiamis, K., Tuckett, Q. M., Tutman, P., Uyan, U., Uzunova, E., Vardakas, L., Velle, G., Verreycken, H., Vintsek, L., Wei, H., Weiperth, A., Weyl, O. L. F., Winter, E. R., Włodarczyk, R., Wood, L. E., Yang, R., Yapıcı, S., Yeo, S. S. B., Yoğurtçuoğlu, B., Yunnie, A. L. E., Zhu, Y., Zięba, G., Žitňanová, K. & Clarke, S., 20/09/2021, In: Science of the Total Environment. 788, 16 p., 147868.

    Research output: Contribution to journalJournal articlepeer-review

  163. Published

    A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction

    Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  164. Published

    A GPU accelerated modeling of bio-effects associated with magnetic resonance imaging

    Hu, B., Glover, P. & Benson, T., 2011, Computational Problem-Solving (ICCP), 2011 International Conference on . IEEE, p. 431-435 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  165. Published

    A hexagonal grid-based sampling planner for aquatic environmental monitoring using unmanned surface vehicles

    Li, T., Xia, M., Chen, J., Gao, S. & De Silva, C., 27/11/2017, 2017 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3683-3688 6 p. (2017 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2017; vol. 2017-January).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  166. Published

    A high average-current electron source for the Jefferson Laboratory free electron laser

    Hannon, F., 2008, Lancaster University. 225 p.

    Research output: ThesisDoctoral Thesis

  167. Published

    A high speed, multi-frequency impedance analysing node.

    Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 502-510 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  168. Published

    A High Voltage Pulse Generator Based on Sequentially Charged Modular Multilevel Converter Submodules Operating in a Voltage Boost Mode

    Elgenedy, M., Darwish, A., Ahmed, S., Williams, B. & McDonald, J., 10/04/2019, In: IET Power Electronics. 12, 4, p. 749-758 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  169. Published

    A horn antenna improves the transmit field homogeneity in the human brain using the travelling wave technique

    Hu, B., Farhat, S. & Glover, P., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  170. Published

    A housekeeping prognostic health management framework for microfluidic systems

    Khan, H., Al-Gayem, Q. & Richardson, A. M. D., 1/06/2017, In: IEEE Transactions on Device and Materials Reliability. 17, 2, p. 438-449 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  171. Published

    A Hybrid Computing Solution and Resource Scheduling Strategy for Edge Computing in Smart Manufacturing

    Li, X., Wan, J., Dai, H. N., Imran, M., Xia, M. & Celesti, A., 1/07/2019, In: IEEE Transactions on Industrial Informatics. 15, 7, p. 4225-4234 10 p., 8643392.

    Research output: Contribution to journalJournal articlepeer-review

  172. E-pub ahead of print

    A hybrid LSTM-KLD approach to condition monitoring of operational wind turbines

    Wu, Y. & Ma, X., expected on 31/01/2022, In: Renewable Energy. 181, p. 554-566 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  173. Published

    A hybrid plasmonic waveguide terahertz quantum cascade laser

    Degl'Innocenti, R., Shah, Y. D., Wallis, R., Klimont, A., Ren, Y., Jessop, D. S., Beere, H. E. & Ritchie, D. A., 23/02/2015, In: Applied Physics Letters. 106, 8, 5 p., 082101.

    Research output: Contribution to journalJournal articlepeer-review

  174. Published

    A hybrid plasmonic waveguide terahertz quantum cascade laser

    Degl'Innocenti, R., Shah, Y. D., Wallis, R., Klimont, A., Ren, Y., Jessop, D. S., Beere, H. E. & Ritchie, D. A., 4/05/2015, CLEO: Science and Innovations, CLEO-SI 2015. Optical Society of America (OSA), p. 2267 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  175. Published

    A hybrid plasmonic waveguide terahertz quantum cascade laser

    Degl'Innocenti, R., Klimont, A., Shah, Y. D., Wallis, R., Ren, Y., Jessop, D. S., Beere, H. E. & Ritchie, D. A., 2015, European Conference on Lasers and Electro-Optics, CLEO 2015. OSA - The Optical Society

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  176. Published

    A hybrid plasmonic waveguide terahertz quantum cascade laser

    Degl'Innocenti, R., Shah, Y. D., Wallis, R., Klimont, A., Ren, Y., Jessop, D. S., Beere, H. E. & Ritchie, D. A., 10/08/2015, 2015 Conference on Lasers and Electro-Optics, CLEO 2015. Institute of Electrical and Electronics Engineers Inc., Vol. 2015-August. 2 p. 7183803

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  177. Published

    A hybrid plasmonic waveguide terahertz quantum cascade laser

    Degl'Innocenti, R., Shah, Y. D., Wallis, R., Klimont, A., Ren, Y., Jessop, D. S., Beere, H. E. & Ritchie, D. A., 13/08/2015, Proceedings 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference, CLEO/Europe-EQEC 2015. Optical Society of America (OSA), 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  178. Published

    A hydro power resource model for North West England.

    Aggidis, G. A., Howard, D. C. & Wright, S. M., 2006, In water and the landscape : the landscape of ecology of freshwater ecosystems : Proceedings of the 14th annual IALE(UK) conference. Davies, B. & Thompson, S. (eds.). p. 41-46 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  179. Published

    A hypertext documentation system for schemebuilder: the mechatronics book.

    Langdon, P. M. & Cheung, H. F., 1994, Mechatronics - the basis for a new industrial development. Southampton: Computational Mechanics Publications, p. 21-23 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  180. Published

    A Joint Numerical and Experimental Study of a Surging Point Absorbing Wave Energy Converter.

    Bhinder, M. A., Rahmati, M. T., Aggidis, G. A., Chaplin, R. V., Mingham, C. G. & Causon, D. M., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  181. Published

    A kinetic Monte Carlo study of vacancy diffusion in non-dilute Ni-Re alloys

    Goswami, K. N. & Mottura, A., 16/01/2019, In: Materials Science and Engineering: A. 743, p. 265-273 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  182. Published

    A knowledge based mechatronics approach to controller design.

    Bradshaw, A. & Counsell, J. M., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1723-1727 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  183. Published

    A Large-Eddy Simulation–Linear-Eddy Model Study of Preferential Diffusion Processes in a Partially Premixed Swirling Combustor With Synthesis Gases

    Li, S., Zheng, Y., Mira, D., Li, S., Zhu, M. & Jiang, X., 2017, In: Journal of Engineering for Gas Turbines and Power. 139, 3, p. 31501 1 p.

    Research output: Contribution to journalJournal articlepeer-review

  184. Published

    A layer-wise fourier expansion approach for stress transfer in cross-ply laminates with transverse matrix cracks

    Yang, J. & Ye, J., 1/12/2007, Proceedings of the 16th International Conference on Composite Materials, ICCM-16: "A Giant Step Towards Environmental Awareness From Green Composites to Aerospace".

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  185. Published

    A localised co-rotating auroral absorption event observed near noon using imaging riometer and EISCAT

    Collis, P. N., Hargreaves, J. K. & White, G. P., 1996, In: Annales Geophysicae. 14, 12, p. 1305-1316 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  186. Published

    A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities

    Junginger, T., Calatroni, S., Sublet, A., Terenziani, G., Prokscha, T., Salman, Z., Suter, A., Proslier, T. & Zasadzinski, J., 7/11/2017, In: Superconductor Science and Technology. 30, 12, 14 p., 125013.

    Research output: Contribution to journalJournal articlepeer-review

  187. Published

    A Low-Cost and Semi-Autonomous Robotic Scanning System for Characterising Radiological Waste

    Monk, S., West, C., Bandala Sanchez, M., Dixon, N., Montazeri, A., Taylor, C. J. & Cheneler, D., 2/11/2021, In: Robotics. 10, 4, 22 p., 119.

    Research output: Contribution to journalJournal articlepeer-review

  188. Published

    A Massively Multi-Authored Mobile Surrealist Book.

    Bamford, W., Coulton, P. & Edwards, R., 06/2006, ACE '06 Proceedings of the 2006 ACM SIGCHI international conference on Advances in computer entertainment technology. New York: ACM, 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  189. Published

    A method and model for deposition of TI-6Al-4V with controlled porosity

    Ahsan, M. N. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 462-471 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  190. Published

    A method and model for pulsed laser cleaning of rapid manufactured parts

    Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  191. Published

    A method for the prediction of the dose rate distribution in a primary containment vessel of the Fukushima Daiichi Nuclear Power Station

    Okumura, K., Riyana, E. S., Wakaei, S., Maeda, H., Katakura, J., Kamada, S., Joyce, M. J. & Lennox, B., 31/01/2019, In: Progress in Nuclear Science and Technology. 6, p. 108-112 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  192. Published

    A method for the replacement of 137Cs with 40K as a non-hazardous radioactive tracer for open-source decommissioning research applications

    Parker, A. J., Boxall, C. & Joyce, M., 11/2013, In: Journal of Radioanalytical and Nuclear Chemistry. 298, 2, p. 797-802 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  193. Published

    A method for the replacement of 137Cs with 40K for open-source ion exchange research applications in hot cells,

    Parker, A. J., Joyce, M. & Boxall, C., 27/09/2012.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  194. Published

    A micromachined dual-band orthomode transducer

    Leal-Sevillano, C. A., Tian, Y., Lancaster, M. J., Ruiz-Cruz, J. A., Montejo-Garai, J. R. & Rebollar, J. M., 2014, In: IEEE Transactions on Microwave Theory and Techniques. 62, 1, p. 55-63 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  195. Published

    A micromechanics and machine learning coupled approach for failure prediction of unidirectional CFRP composites under triaxial loading: A preliminary study

    Chen, J., Wan, L., Ismail, Y., Ye, J. & Yang, D., 1/07/2021, In: Composite Structures. 267, 14 p., 113876.

    Research output: Contribution to journalJournal articlepeer-review

  196. Published

    A microstructure sensitive model for deformation of Ti-6Al-4V describing Cast-and-Wrought and Additive Manufacturing morphologies

    Galindo-Fernández, M. A., Mumtaz, K., Rivera-Díaz-del-Castillo, P. E. J., Galindo-Nava, E. I. & Ghadbeigi, H., 15/12/2018, In: Materials and Design. 160, p. 350-362 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  197. Published

    A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion

    Borodachenkova, M., Barlat, F., Wen, W., Bastos, A. & Grácio, J. J., 2015, In: International Journal of Plasticity. 68, p. 150-163 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  198. Published

    A Millimeter-Wave Klystron Upconverter With a Higher Order Mode Output Cavity

    Burt, G., Zhang, L., Constable, D. A., Yin, H., Lingwood, C. J., He, W., Paoloni, C. & Cross, A. W., 09/2017, In: IEEE Transactions on Electron Devices. 64, 9, p. 3857-3862 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  199. Published

    A Mixed-Methods Approach to Developing and Evaluating an SME Business Support Model for Innovation in Rural England

    Fish, S. & Lambert, C., 16/04/2021, p. 569-575. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  200. Published

    A model for ferrite/pearlite band formation and prevention in steels

    Rivera-Díaz-Del-Castillo, P. E. J., Sietsma, J. & Van Der Zwaag, S., 02/2004, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 35 A, 2, p. 425-433 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  201. Published

    A model for predicting smoke back-layering length in tunnel fires with the combination of longitudinal ventilation and point extraction ventilation in the roof

    Wang, J., Yuan, J., Fang, Z., Tang, Z., Qian, P. & Ye, J., 1/10/2018, In: Tunnelling and Underground Space Technology. 80, p. 16-25 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  202. Published

    A Model For Remote Depth Estimation Of Buried Radioactive Wastes Using CdZnTe Detector

    Ukaegbu, I. & Akurugoda Gamage, K., 18/05/2018, In: Sensors. 18, 5, 12 p., 1612.

    Research output: Contribution to journalJournal articlepeer-review

  203. Published

    A model for the microstructure behaviour and strength evolution in lath martensite

    Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 21/07/2015, In: Acta Materialia. 98, p. 81-93 13 p., 12267.

    Research output: Contribution to journalJournal articlepeer-review

  204. Published

    A modelling study of the multiphase leakage flow from pressurised CO2 pipeline

    Zhou, X., Li, K., Tu, R., Yi, J., Xie, Q. & Jiang, X., 5/04/2016, In: Journal of Hazardous Materials. 306, p. 286-294 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  205. Published

    A modified Blahut algorithm for decoding Reed-Solomon codes beyond the half the minimum distance

    Egorov, S., Markarian, G. & Pickavance, K., 1/12/2004, In: IEEE Transactions on Communications. 52, 12, p. 2052-2056 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  206. Published

    A modified proportional guidance law for homming missiles by using of nonlinear filters

    Sadeghi, H., Poshtan, J. & Montazeri, A., 2008, Mechatronics and Its Applications, 2008. ISMA 2008. 5th International Symposium on. New York: IEEE, p. 350-355 6 p. (International Symposium on Mechatronics and its Applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  207. Published

    A Modular Multilevel Generic Pulse-Waveform Generator for Pulsed Electric Field Applications

    Elgenedy, M. A., Darwish, A., Ahmed, S. & Williams, B. W., 11/09/2017, In: IEEE Transactions on Plasma Science. 45, 9, p. 2527-2535 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  208. Published

    A Modular Multilevel-Based High-Voltage Pulse Generator for Water Disinfection Applications

    Elgenedy, M. A., Darwish, A., Ahmed, S. & Williams, B. W., 1/11/2016, In: IEEE Transactions on Plasma Science. 44, 11, p. 2893-2900 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  209. Published

    A Monte Carlo model for neutron coincidence counting with fast organic liquid scintillation detectors

    Gamage, K., Joyce, M. & Cave, F., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  210. Published

    A Monte Carlo simulation of monoenergetic neutrons traversing rectangular and spherical polyethylene moderators.

    Monk, S. & Selwood, M., 03/2011, In: Radiation Protection Dosimetry. 144, 1-4, p. 182-186 5 p.

    Research output: Contribution to journalJournal article

  211. Published

    A Monte Carlo study of scintillator-based coded-aperture neutron imaging

    Hayes, S. & Gamage, K., 2013, p. 74.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  212. Published

    A Monte Carlo study of the effect of coded-aperture material and thickness on neutron imaging

    Hayes, S. & Gamage, K., 2014, In: Radiation Protection Dosimetry. 161, 1-4, p. 265-268 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  213. Published

    A multibeam active antenna for an European contiguous coverage at Ku-band

    BARTOLUCCI, G., LEUZZI, G., PAOLONI, C., RUGGIERI, M. & RUSSO, P., 1989, Global Telecommunications Conference, 1989, and Exhibition. Communications Technology for the 1990s and Beyond. GLOBECOM '89., IEEE. New York: IEEE, p. 1115-1119 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  214. Published

    A multi-frequency impedance analyser for electrical tomography systems.

    Yin, W., Dickinson, S. J. & Peyton, A. J., 2005, Proceedings of the 4th world congress on industrial process tomography. p. 30-35 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  215. Published

    A multi-instrument data analysis toolbox

    Marple, S. R. & Honary, F., 09/2004, In: Advances in Polar Upper Atmosphere Research. 18, p. 120-130 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  216. Published

    A multi-mode MEMS sensor design to support system test and health & usage monitoring applications

    Xu, Z., Richardson, A., Koltsov, D., Li, L., Begbie, M. & Wang, C., 1/05/2010, Test Symposium (ETS), 2010 15th IEEE European. p. 263 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  217. Published

    A multi-scale model for studying failure mechanisms of composite wind turbine blades

    Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In: Composite Structures. 212, p. 220-229 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  218. Published

    A NaI(Tl) scintillator for in situ environmental studies and laboratory detection measurements of aqueous potassium chloride

    Parker, A. J., Boxall, C., Joyce, M. & Schotanus, P., 12/2012, IEEE Nuclear Science Symposium and Medical Imaging Conference. IEEE, p. 38-43 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  219. Published

    A new adaptive recursive RLS-based fast-array IIR filter for active noise and vibration control systems

    Montazeri, A. & Poshtan, J., 01/2011, In: Signal Processing. 91, 1, p. 98-113 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  220. Published

    A new approach for the bending problem of shallow shell by the boundary element method

    Ye, J., 10/1988, In: Applied Mathematical Modelling. 12, 5, p. 467-470 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  221. Published

    A new approach to improve the parameter estimation accuracy in robotic manipulators using a multi-objective output error identification technique

    West, C., Montazeri, A., Monk, S. D., Duda, D. & Taylor, C. J., 14/12/2017, 26th IEEE International Symposium on Robot and Human Interactive Communication, Lisbon. IEEE, p. 1406-1411 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  222. Published

    A new boundary element approach of modeling singular stress fields of plane V-notch problems

    Niu, Z., Cheng, C., Ye, J. & Recho, N., 1/08/2009, In: International Journal of Solids and Structures. 46, 16, p. 2999-3008 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  223. Published

    A new design concept for milling tools of spherical surfaces obtained by kinematic generation

    Neagu, C., Lupeanu, M. & Rennie, A., 1/05/2013, In: Applied Mathematical Modelling. 37, 9, p. 6119-6134 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  224. Published

    A new etching route for revealing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, P. E. J., Peekstok, E. & van der Zwaag, S., 05/2007, In: Materials Characterization. 58, 5, p. 455-460 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  225. Published

    A new fictitious time for the dynamic relaxation (DXDR) method

    Kadkhodayan, A., Alamatian, J. & Turvey, G. J., 7/05/2008, In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018 23 p.

    Research output: Contribution to journalJournal articlepeer-review

  226. Forthcoming

    A New Four-Quadrant Inverter Based on Dual-Winding Isolated Cuk Converters for Railway and Renewable Energy Applications

    Alotaibi, S., Darwish, A., Ma, X. & Williams, B. W., 1/07/2020, (Accepted/In press).

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  227. Published

    A new imaging riometer based on Mills Cross technique

    Grill, M., Honary, F., Nielsen, E., Hagfors, T., Dekoulis, G., Chapman, P. & Yamagishi, H., 07/2003, p. 26-31. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  228. Published

    A new method for deducing the effective collision frequency profile in the D-region

    Beharrell, M. J. & Honary, F., 3/05/2008, In: Journal of Geophysical Research. 113, A05303, p. 1-9 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  229. Published

    A new methodology for IC product quality estimation.

    Olbrich, T., Grout, I., Eben Aimine, Y., Richardson, A. & Contensou, J., 1997, Proceedings of the European design and test conference (ED&TC '97). Paris: IEEE Computer Society Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  230. Forthcoming

    A New Modular Three-phase Inverter Based on Sepic-Cuk Combination Converter for Photovoltaic Applications

    Alotaibi, S., Darwish, A., Ma, X. & Williams, B. W., 1/08/2020, (Accepted/In press) Proceedings of the 9th International Conference on Renewable Power Generation. IET Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  231. Published
  232. Published

    A new pneumatic suspension system with independent stiffness and ride height tuning capabilities

    Yin, Z., Khajepour, A., Cao, D., Ebrahimi, B. & Guo, K., 2012, In: Vehicle System Dynamics. 50, 12, p. 1735-1746 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  233. Published

    A new quality estimation methodology for mixed-signal and analogue ICs

    Olbrich, T., Grout, I. A., Aimine, Y. E., Richardson, A. M. & Contensou, J., 1997, European Design and Test Conference, 1997. ED&TC 97. Proceedings . LOS ALAMITOS: I E E E, COMPUTER SOC PRESS, p. 573-580 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  234. Published

    A new robust adaptive IIR filter for compensating uncertainties in the secondary path estimation model in ANVC systems

    Montazeri, A. & Poshtan, J., 2008, Signal Processing, 2008. ICSP 2008. 9th International Conference on. Yuan, BZ., Ruan, QQ. & Tang, XF. (eds.). New York: IEEE, p. 252-255 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  235. Published

    A new synthetic methodology for the preparation of biocompatible and organo-soluble barbituric- and thiobarbituric acid based chitosan derivatives for biomedical applications

    Shahzad, S., Shahzadi, L., Mahmood, N., Siddiqi, S. A., Rauf, A., Manzoor, F., Chaudhry, A. A., Rehman, I. U. & Yar, M., 1/09/2016, In: Materials Science and Engineering: A. 66, p. 156-163 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  236. Published

    A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera-Díaz-Del-Castillo, P. E. J., Yan, W., Yang, K., San Martín, D., Kestens, L. A. I. & Van Der Zwaag, S., 06/2010, In: Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  237. Published

    A Non-parametric Method for Online Secondary Path Estimation in Active Noise Control Systems

    Mohamady, S., Niu, Y. & Montazeri, A., 16/03/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  238. Published

    A novel 3D composite structure with tunable Poisson's ratio and stiffness

    Hou, X. & Hu, H., 07/2015, In: physica status solidi (b). 252, 7, p. 1565–1574 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  239. Published

    A Novel 3D Game API for Symbian OS Smartphones.

    Chehimi, F., Coulton, P. & Edwards, R., 11/2006. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  240. Published

    A Novel Adaptive LDMOS Power Amplifier with Constant Efficiency for Wide Dynamic Power Levels Control

    Narendra, K., Mediano, A., Paoloni, C. & Limiti, E., 2008, 2008 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-4. NEW YORK: IEEE, p. 1500-1503 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  241. Published

    A novel application of natural fluorescence to understand the sources and transport pathways of pollutants from livestock farming in small headwater catchments

    Old, G. H., Naden, P. S., Granger, S. J., Bilotta, G. S., Brazier, R. E., Macleod, C. J. A., Krueger, T., Bol, R., Hawkins, J. M. B., Haygarth, P. & Freer, J., 15/02/2012, In: Science of the Total Environment. 417-418, p. 169-182 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  242. Published

    A novel approach for online sensor testing based on an encoded test stimulus

    Dumas, N., Xu, Z., Georgopoulos, K., Bunyan, R. J. T. & Richardson, A., 2007, ETS 2007: 12th IEEE European Test Symposium, Proceedings. LOS ALAMITOS: IEEE COMPUTER SOC, p. 105-110 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  243. Published

    A novel approach to neutron dosimetry

    Balmer, M., Akurugoda Gamage, K. A. & Taylor, G., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  244. Published

    A novel approach to neutron dosimetry

    Balmer, M., Akurugoda Gamage, K. A. & Taylor, G., 14/10/2016, In: Medical Physics. 43, 11, p. 5981-5990 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  245. Published

    A novel co-harmonic gyrotron

    Constable, D. A., Ronald, K., Phelps, A. D. R., He, W., Cross, A. W., Savilov, A. V., Bratman, V. L. & Bandurkin, I. V., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  246. Published

    A novel co-harmonic gyrotron

    Constable, D. A., Ronald, K., Phelps, A. D. R., He, W., Cross, A. W., Savilov, A. V., Bratman, V. L. & Bandurkin, I. V., 21/10/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  247. Published

    A novel concept to develop composite structures with isotropic negative Poisson's ratio: effects of random inclusions

    Hou, X., Hu, H. & Silberschmidt, V., 12/10/2012, In: Composites Science and Technology. 72, 15, p. 1848–1854 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  248. Published

    A novel condition monitoring and real-time simulation system for wind turbines

    Ma, X. & Cross, P., 4/02/2013, Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. Vienna: EWEA, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  249. Published

    A novel configuration of a double lap adhesive joint with reduced stress concentrations

    Yousefi Kanani, A., Hou, X. & Ye, J., 7/09/2017, 20th International Conference on Composite Structures - ICCS 20. Tornabene, F. (ed.). Bologna, Italy: Societa Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  250. Published

    A novel cylindrical TE2,1 mode converter

    Constable, D., Ronald, K., He, W., Fampris, X. S., Whyte, C. G. & Robertson, C. W., 17/09/2010, In: Review of Scientific Instruments. 81, 9, 10 p., 094702.

    Research output: Contribution to journalJournal articlepeer-review

  251. Published
  252. Published

    A novel DGT-sediment trap device for the in-situ measurement of element remobilisation from settling particles in water columns and its application to trace metal release from Mn and Fe oxides.

    Hamilton-Taylor, J., Smith, E. J., Davison, W. & Zhang, H., 1999, In: Limnology and Oceanography. 44, 7, p. 1772-1780 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  253. Published

    A novel dissimilar single-lap joint with interfacial stiffness improvement

    Yousefi Kanani, A., Hou, X. & Ye, J., 15/11/2020, In: Composite Structures. 252, 11 p., 112741.

    Research output: Contribution to journalJournal articlepeer-review

  254. Published

    A novel method for remote depth estimation of buried radioactive contamination

    Ukaegbu, I. & Akurugoda Gamage, K., 8/02/2018, In: Sensors. 18, 2, 13 p., 507.

    Research output: Contribution to journalJournal articlepeer-review

  255. Published

    A novel method for test and calibration of capacitive accelerometers with a fully electrical setup

    Dumas, N., Azaies, F., Mailly, F., Richardson, A. & Nouet, P., 2008, Design and Diagnostics of Electronic Circuits and Systems, 2008. DDECS 2008. 11th IEEE Workshop on . Straube, B., Drutarovsky, M., Renovell, M., Gramata, P. & Fischerova, M. (eds.). LOS ALAMITOS: IEEE COMPUTER SOC, p. 304-309 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  256. Published

    A novel method for the manufacture of porous structures with multi-component, coated pores

    Siddiq, A. R. & Kennedy, A. R., 1/06/2017, In: Materials Letters. 196, p. 324-327 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  257. Published

    A Novel Receive-Only Liquid Nitrogen ( LN2 )-Cooled RF Coil for High-Resolution In Vivo Imaging on a 3-Tesla Whole-Body Scanner

    Hu, B., Varma, G., Schaeffter, T., Keevil, S. F. & Glover, P., 01/2012, In: IEEE Transactions on Instrumentation and Measurement. 61, 1, p. 129-139 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  258. Published

    A novel surface-cluster approach towards transient modeling of hydro-turbine governing systems in the start-up process

    Zhang, H., Chen, D., Guo, P., Luo, X. & Aggidis, G., 1/06/2018, In: Energy Conversion and Management. 165, p. 861-868 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  259. Published

    A novel technique for design and stability analysis of adaptive IIR Filters in ANVC aplications

    Montazeri, A. & Poshtan, J., 2007, Signal Processing and Communications, 2007. ICSPC 2007. IEEE International Conference on. New York: IEEE, p. 524-527 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  260. Published

    A novel technique for the detailed size characterization of wear debris.

    Elfick, A. P., Green, S. M., Pinder, I. M. & Unsworth, A., 05/2000, In: Journal of Materials Science: Materials in Medicine. 11, 5, p. 267-271 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  261. Published

    A Novel Topology for Large Signal Travelling Wave Amplifier

    Paoloni, C. & D'Agostino, S., 1995, Proceedings of the IEEE Workshop on Nonlinear Signal and Image Processing. Greece

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  262. Published

    A novel wavelet-based method for neutron/gamma discrimination in liquid scintillators

    Yousefi, S., Lucchese, L. & Aspinall, M. D., 2008, IEEE Nuclear Science Symposium Conference Record. IEEE, p. 2387-2391 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  263. Published

    A null phase-difference technique for ULF wave direction-finding

    Tullet, P. F. & Honary, F., 2/02/2010, In: Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology. 165, 2, p. 187-191 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  264. Published

    A numerical investigation of powder heating in coaxial laser direct metal deposition

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 455-458 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  265. Published

    A Numerical Modeling Approach of Composite Riser Hoses

    Amaechi, C. V. & Ye, J., 19/12/2017.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  266. Published

    A numerical modeling approach of composite risers for deep waters

    Amaechi, C. V. & Ye, J., 8/09/2017, ICCS20 20th International Conference on Composite Structures. Ferreira, A. J. M., Larbi, W., Deu, J-F., Tornabene, F. & Fantuzzi, N. (eds.). Societa Editrice Esculapio, p. 262-263 2 p. (Structural and Computational Mechanics Book Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNAbstract

  267. Published

    A numerical study of an annular liquid jet in a compressible gas medium

    Siamas, G. A., Jiang, X. & Wrobel, L. C., 04/2008, In: International Journal of Multiphase Flow. 34, 4, p. 393-407 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  268. Published

    A numerical study of the elastic behaviors of carbon-epoxy lamina under uni-axial compression using the discrete element method

    Yang, D. M., Tan, Y. Q., Ye, J. Q. & Sheng, Y., 1/01/2008, Proceedings of the 9th International Conference on Computational Structures Technology, CST 2008. Topping, B. H. V. & Papadrakakis, M. (eds.). Civil-Comp press, Vol. 88. 18

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  269. Published

    A numerical study of the impurity effects of nitrogen and sulfur dioxide on the solubility trapping of carbon dioxide geological storage

    Li, D. & Jiang, X., 1/09/2014, In: Applied Energy. 128, p. 60–74 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  270. Published

    A parallel 3D unstructured implicit RANS solver for compressible and incompressible CFD simulations

    Bonfiglioli, A., Campobasso, S., Carpentieri, B. & bollhoefer, M., 2012, Parallel Processing and Applied Mathematics: 9th International Conference, PPAM 2011, Torun, Poland, September 11-14, 2011. Revised Selected Papers, Part II. Wyrzykowski, R., Dongarra, J., Karczewski, K. & Waśniewski, J. (eds.). Berlin: Springer, p. 312-322 11 p. (Lecture Notes in Computer Science; vol. 7203).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  271. Published

    A parametric study of adhesive bonded joints with composite material using black-box and grey-box machine learning methods: Deep neuron networks and genetic programming

    Gu, Z., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 15/07/2021, In: Composites Part B: Engineering. 217, 11 p., 108894.

    Research output: Contribution to journalJournal articlepeer-review

  272. Published

    A phantom for research studies of radiologically-contaminated land.

    Adams, J. C., Joyce, M. J. & Mellor, M., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  273. Published

    A pharmacological and mutagenic approach to dissecting the response of Arabidopsis thaliana to ozone.

    North, K., Evans, N. H., Hetherington, A. M., McAinsh, M. & Knight, M. R., 2003, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 134, Supple, p. S137

    Research output: Contribution to journalJournal articlepeer-review

  274. Published

    A Physics-Based Crystallographic Modeling Framework for Describing the Thermal Creep Behavior of Fe-Cr Alloys

    Wen, W., Capolungo, L., Patra, A. & Tomé, C. N., 1/05/2017, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 5, p. 2603-2617 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  275. Published

    A pilot study into the optimization of the shape of a wave energy collector by genetic algorithm.

    McCabe, A. P., Aggidis, G. A. & Widden, M. B., 09/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  276. Published

    A point defect model for YBa2Cu3O7 from density functional theory

    Murphy, S. T., 20/11/2020, In: Journal of Physics Communications. 4, 11, 14 p., 115003.

    Research output: Contribution to journalJournal articlepeer-review

  277. Published

    A portable energy-sensitive cosmic neutron detection instrument

    Monk, S., Joyce, M., Jarrah, Z., King, D. & Oppenheim, M., 02/2008, In: Review of Scientific Instruments. 79, 2, 8 p., 023301.

    Research output: Contribution to journalJournal articlepeer-review

  278. Published

    A portable multi-functional real-time digital simulator dedicated to protective relay testing

    Liang, Z., Ma, X., Wang, H. & Wang, L., 12/1998, In: Electricity. 9, 4, p. 27-29 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  279. Published

    A potential research area under shadow in engineering: Agricultural machinery design and manufacturing

    Celik, K., Rennie, A. & Akinci, I., 28/03/2019. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  280. Published

    A Potential Research Area Under Shadow In Engineering: Agricultural Machinery Design and Manufacturing

    Celik, H. K., Rennie, A. & Akinci, I., 1/06/2020, In: ISPEC Journal of Agricultural Sciences. 4, 2, p. 66-86 21 p.

    Research output: Contribution to journalJournal articlepeer-review

  281. Published

    A practical approach based on a unilateral FET model for the design of a MMIC distributed amplifier

    Paoloni, C. & DAgostino, S., 11/1996, In: Microwave and Optical Technology Letters. 13, 4, p. 219-221 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  282. Published

    A Practical Example of Fractional Order Generalised Predictive Control: Forced Ventilation in A Micro-Climate Test Chamber

    Alarfaj, Y., 31/12/2019, In: IFAC-PapersOnLine. 52, 11, p. 97-102 6 p.

    Research output: Contribution to journalConference articlepeer-review

  283. Published

    A preliminary hip joint simulator study of the migration of a cemented femoral stem

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 02/2003, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 217, 2, p. 127-135 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  284. Published

    A preliminary study into optimising the shape of a wave energy collector using a genetic algorithm.

    McCabe, A. P. & Aggidis, G. A., 04/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  285. Published

    A preliminary study of the hydrolysis of hydroxamic acid complexants in the presence of oxidising metal ions

    Andrieux, F. P. L., Boxall, C., May, I. & Taylor, R. J., 2010, In: IOP Conference Series: Materials Science and Engineering. 9, 1, p. - 8 p., 012081.

    Research output: Contribution to journalJournal articlepeer-review

  286. Published

    A preparation method for Al/AlN ceramics substrates by using a CuO interlayer

    Fei, M., Fu, R., Agathopoulos, S., Fang, J., Wang, C. & Zhu, H., 15/09/2017, In: Materials and Design. 130, p. 373-380 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  287. Published

    A project-based heat transfer course.

    Anderson, D. C., 1992, In: International Journal of Mechanical Engineering Education. 20, 2

    Research output: Contribution to journalJournal article

  288. Published

    A prototype telepresence robot for use in the investigation of ebola and lassa virus threatened villages in Nigeria

    Monk, S., Jorgensen, E., McCulloch, A., Peacock, R., Sangprachatanaruk, I., Azeta, J., Bolu, C. A. & Taylor, C. J., 7/01/2021, Proceedings of the 27th International Conference on Systems Engineering, ICSEng 2020. Selvaraj, H., Chmaj, G. & Zydek, D. (eds.). Springer, p. 34-48 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  289. Published

    A Python Package to Preprocess the Data Produced by Novonix High-Precision Battery-Testers

    Gonzalez-Perez, V., Keil, P., Li, Y., Zülke, A., Burrel, R., Csala, D. & Hoster, H., 4/03/2020, In: Journal of Open Research Software. 8, p. 1-5 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  290. Published

    A quantitative comparison of in-line coating thickness distributions obtained from a pharmaceutical tablet mixing process using discrete element method and terahertz pulsed imaging

    Pei, C., Lin, H., Markl, D., Shen, Y., Zeitler, J. A. & Elliott, J. A., 31/12/2018, In: Chemical Engineering Science. 192, p. 34-45 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  291. Published

    A radioanalytical phantom for assessing the efficacy of electrokinetic decontamination of entrained radioactivity within concrete media

    Parker, A. J., Joyce, M. & Boxall, C., 05/2014, In: Journal of Radioanalytical and Nuclear Chemistry. 300, 2, p. 769-777 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  292. Published

    A RANS Code for Low-Speed Axial Turbo machinery flow analysis.

    Rahmati, M. T. & Aggidis, G. A., 06/2008.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  293. Published

    A rare-earth free SHEV powertrain and its control

    Fernando, N. & Gamage, K., 8/09/2015, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe). IEEE, p. 1-7 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  294. Published

    A rationalised CFD design methodology for Turgo turbines to enable local manufacture in the Global South

    Butchers, J., Benzon, S., Williamson, S., Booker, J. & Aggidis, G., 1/10/2021, In: Energies. 14, Energies 2021, 23 p., 6250.

    Research output: Contribution to journalJournal articlepeer-review

  295. Published

    A re-appraisal of wear features of acetabular sockets using atomic force microscopy.

    Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 10/2002, In: Wear. 253, 7-8, p. 839-847 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  296. Published

    A reliable scheme for fabricating sub-5 nm co-planar junctions for single-molecule electrons.

    Koltsov, D., Joachim, C., Ondarcuhu, T. & Saifullah, M., 1/09/2002, In: Nanotechnology. 13, 5, p. 659-662 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  297. Published

    A remote condition monitoring system for wind-turbine based DG systems

    Ma, X., Wang, G., Cross, P. & Zhang, X., 31/05/2012, In: Journal of Physics: Conference Series. 364, 1, 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  298. Published

    A remotely triggered fast neutron detection instrument based on a plastic organic scintillator

    Jones, A. R., Aspinall, M. D. & Joyce, M. J., 27/02/2018, In: Review of Scientific Instruments. 89, 2, 023115.

    Research output: Contribution to journalJournal articlepeer-review

  299. Published

    A Remote-operated System to Map Radiation Dose in the Fukushima Daiichi Primary Containment Vessel

    Nancekievill, M., Jones, A. R., Joyce, M. J., Lennox, B., Watson, S., Katakura, J., Okumura, K-I., Kamada, S., Katoh, M. & Nishimura, K., 10/01/2018, In: EPJ Web of Conferences. 170, 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  300. E-pub ahead of print

    A renewable lignin-derived bio-oil for boosting the oxidation stability of biodiesel

    Umar, Y., Velasco, O., Abdelaziz, O. Y., Aboelazayem, O., Gadalla, M. A., Hulteberg, C. P. & Saha, B., expected on 31/01/2022, In: Renewable Energy. 182, p. 867-878 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  301. Published

    A Resonance Broadening Kinetic Theory of the Modified-two-stream Instability: Implications for Radar Auroral Backscatter Experiments

    Robinson, T. R. & Honary, F., 1/02/1990, In: Journal of Geophysical Research. 95, A2, p. 1073-1085 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  302. Published

    A review of floating semisubmersible hull systems: Column stabilized unit

    Odijie, A. C., Wang, F. & Ye, J., 1/11/2017, In: Ocean Engineering. 144, p. 191-202 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  303. Published

    A Review of Forecasting Algorithms and Energy Management Strategies for Microgrids

    Ma, J. & Ma, X., 06/2018, In: Systems Science and Control Engineering. 6, 1, p. 237-248 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  304. Published

    A review of ground-based robotic systems for the characterization of nuclear environments

    Tsitsimpelis, I., Taylor, C. J., Lennox, B. & Joyce, M. J., 1/03/2019, In: Progress in Nuclear Energy. 111, p. 109-124 16 p.

    Research output: Contribution to journalJournal articlepeer-review

  305. Published

    A review of physical modelling and numerical simulation of long-term geological storage of CO2

    Jiang, X., 11/2011, In: Applied Energy. 88, 11, p. 3557-3566 10 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  306. Published

    A review of recent developments on kinetics parameters for glycerol electrochemical conversion – A by-product of biodiesel

    Rahim, S. A. N. M., Lee, C. S., Abnisa, F., Aroua, M. K., Daud, W. A. W., Cognet, P. & Pérès, Y., 25/02/2020, In: Science of the Total Environment. 705, 27 p., 135137.

    Research output: Contribution to journalReview articlepeer-review

  307. Published

    A review of recent progress on electrocatalysts toward efficient glycerol electrooxidation

    Alaba, P. A., Lee, C. S., Abnisa, F., Aroua, M. K., Cognet, P., Pérès, Y. & Wan Daud, W. M. A., 31/10/2021, In: Reviews in Chemical Engineering. 37, 7, p. 779-811 33 p.

    Research output: Contribution to journalJournal articlepeer-review

  308. Published

    A review of suitable methods for producing automated or semi automated product designs for production using RM technologies

    Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  309. Published

    A review of testing methods for mixed signal ICs.

    Harvey, R. J. A., Bratt, A. H. & Dorey, A. P., 1993, In: Microelectronics Journal. 24, 6, p. 663-674 12 p.

    Research output: Contribution to journalJournal article

  310. Published

    A Review of the Applications of OCT for Analysing Pharmaceutical Film Coatings

    Lin, H., Zhang, Z., Markl, D., Zeitler, J. A. & Shen, Y., 19/12/2018, In: Applied Sciences. 8, 12, 12 p., 2700.

    Research output: Contribution to journalJournal articlepeer-review

  311. Published

    A Review on Additive Manufacturing of Pure Copper

    Jiang, Q., Zhang, P., Yu, Z., Shi, H., Wu, D., Yan, H., Ye, X., Lu, Q. & Tian, Y., 21/06/2021, In: Coatings. 11, 6, 30 p., 740.

    Research output: Contribution to journalJournal articlepeer-review

  312. Published

    A review on impact of mining and mineral processing industries through life cycle assessment

    Farjana, S. H., Huda, N., Mahmud, M. A. P. & Rahman, S., 10/09/2019, In: Journal of Cleaner Production. 231, p. 1200-1217 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  313. Published

    A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy

    Tian, Z., Zhang, C., Wang, D., Liu, W., Fang, X., Wellmann, D., Zhao, Y. & Tian, Y., 20/12/2019, In: Applied Sciences. 10, 1, 14 p., 81.

    Research output: Contribution to journalJournal articlepeer-review

  314. Published

    A review on the effect of laser pulse shaping on the microstructure and hot cracking behavior in the welding of alloys

    Zhang, P., Jia, Z., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Chen, J., Wang, F. & Tian, Y., 1/08/2021, In: Optics and Laser Technology. 140, 20 p., 107094.

    Research output: Contribution to journalJournal articlepeer-review

  315. Unpublished

    A Reynolds-averaged Navier-Stokes computational analysis of a novel multi-nozzle annular air-jet pump

    Morrall, A., 2021, (Unpublished) Lancaster University. 347 p.

    Research output: ThesisDoctoral Thesis

  316. Published
  317. Published

    A secondary electron emission model for multistage collectors.

    Ghosh, T. K., Srivastava, A., Agarwal, P., Maurya, S., Srivastava, V. & Carter, R. G., 2004, Proceedings of the displays and vacuum electronics conference. p. 389-394 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  318. Published

    A selective uranium extraction agent prepared by polymer imprinting.

    Saunders, G. D., Walton, P. H., Joyce, M. J. & Port, S. N., 2000, In: Chemical Communications. 4, p. 273-274 2 p.

    Research output: Contribution to journalJournal article

  319. Published

    A semi-analytical finite element for laminated composite plates

    Sheng, H. Y. & Ye, J. Q., 07/2002, In: Composite Structures. 57, 1-4, p. 117-123 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  320. Published

    A Serendipitous Mobile Game.

    Clemson, H., Coulton, P. & Edwards, R., 11/2006, Proceedings GDTW 2006 The Fourth International Game Design and Technology Workshop and Conference. Merabti, M., Lee, N., Perlin, K. & El Rhalibi, A. (eds.). Liverpool: Liverpool John Moores University, 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  321. Published

    A series solution of the exact equation for thick orthotropic plates

    Fan, J. & Ye, J., 1990, In: International Journal of Solids and Structures. 26, 7, p. 773-778 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  322. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 07/2018, In: International Journal of 3D Printing Technologies and Digital Industry. 2, 2, p. 59-67 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  323. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNAbstract

  324. Published

    A Simple and Efficient Device and Method for Measuring the Kinetics of Gas-Producing Reactions

    Slot, T., Raveendran, S. & Rothenberg, G., 25/11/2019, In: Angewandte Chemie International Edition. 58, 48, p. 17273-17276 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  325. Published

    A simple model and mafia simulation for studying the beam-wave interaction in the output gap of a klystron.

    Feng, J. J., Carter, R. G., Feng, Z. (ed.) & Chen, WH. (ed.), 2004, p. 358-361. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  326. Published

    A simple model for studying the beam-wave interaction in the output gap of a klystron

    Carter, R. G. & Feng, J., 1/01/2003, 4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 265-267 3 p. 1286297. (4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  327. Published

    A simplified procedure to calculate the power gain definitions of FET's

    Paoloni, C., 03/2000, In: IEEE Transactions on Microwave Theory and Techniques. 48, 3, p. 470-474 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  328. Published

    A single-stage three-phase DC/AC inverter based on Cuk converter for PV application

    Darwish, A., Abdel-Khalik, A. S., Massoud, A., Holliday, D. & Williams, B. W., 11/2013, 2013 7th IEEE GCC Conference and Exhibition (GCC). IEEE, p. 384-389 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  329. Published

    A Single-Stage Three-Phase Inverter Based on Cuk Converters for PV Applications

    Darwish, A., Holliday, D., Ahmed, S., Massoud, A. M. & Williams, B. W., 1/12/2014, In: IEEE Journal of Emerging and Selected Topics in Power Electronics . 2, 4, p. 797-807 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  330. Published

    A spectrophotometric study of cerium IV and chromium VI species in nuclear fuel reprocessing process streams

    Nickson, I. D., Boxall, C., Jackson, A. & Whillock, G. O. H., 2010, In: IOP Conference Series: Materials Science and Engineering. 9, 1, p. - 8 p., 012011.

    Research output: Contribution to journalJournal articlepeer-review

  331. Published

    A Stacked GRU-RNN-based Approach for Predicting Renewable Energy and Electricity Load for Smart Grid Operation

    Xia, M., Shao, H., Ma, X. & de Silva, C. W., 31/10/2021, In: IEEE Transactions on Industrial Informatics. 17, 10, p. 7050-7059 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  332. Published

    A state space finite element for laminated composite plates

    Sheng, H. Y. & Ye, J. Q., 16/08/2002, In: Computer Methods in Applied Mechanics and Engineering. 191, 37-38, p. 4259-4276 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  333. Published

    A state space finite element for laminated composites with free edges and subjected to transverse and in-plane loads

    Ye, J. Q., Sheng, H. Y. & Qin, Q. H., 06/2004, In: Computers and Structures. 82, 15-16, p. 1131-1141 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  334. Published

    A statistical mechanics theory of grain deformation and its prediction of dynamical recovery and recrystallization

    Rivera Díaz Del Castillo, P. E. J. & Van Der Zwaag, S., 2004, In: Materials Science Forum. 467-470, I, p. 87-92 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  335. Published

    A Step-Up Modular High-Voltage Pulse Generator Based on Isolated Input-Parallel/Output-Series Voltage-Boosting Modules and Modular Multilevel Sub-modules

    Darwish, A., Elgenedy, M. A. A., Finney, S., Williams, B. & Mcdonald, J. R., 13/03/2019, In: IEEE Transactions on Industrial Electronics. 66, 3, p. 2207-2216 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  336. Published

    A stochastic approach to cable dynamics with moving rivulets

    Cao, D. Q., Tucker, R. W. & Wang, C., 20/11/2003, In: Journal of Sound and Vibration. 268, 2, p. 291-304 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  337. Published

    A strip loaded dielectric resonator antenna for circular polarisation

    Ambattu, P., Hamsakutty, V., Yohannan, J. & Mathew, KT., 07/2006, In: Microwave and Optical Technology Letters. 48, 7, p. 1354-1356 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  338. Published

    A structured approach to the simplification of optimization problems in a virtual prototyping environment.

    Comerford, D. P. & Quayle, S. D., 2004, Proceedings of the 5th national conference on rapid design, prototyping and manufacture. p. 37-44 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  339. Published

    A study of an azonitrile containing a sizable fluorocarbon group.

    Bevington, J. C., Guyot, B., Huckerby, T. N., Hunt, B. J. & Jones, R., 04/2000, In: European Polymer Journal. 36, 4, p. 657-661 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  340. Published

    A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills

    Butler-Smith, P. W., Axinte, D. A., Daine, M., Kennedy, A. R., Harper, L. T., Bucourt, J. F. & Ragueneau, R., 01/2015, In: International Journal of Machine Tools and Manufacture. 88, p. 175-183 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  341. Published

    A study of aspect angle effects in the E-region irregularity velocity using multi-point electric field measurements

    Makarevich, R. A., Senior, A., Koustov, A. V., Uspensky, M., Honary, F. & Dyson, P. L., 11/2006, In: Geophysical Research Letters. 33, 21, p. L21102

    Research output: Contribution to journalJournal articlepeer-review

  342. Published

    A study of cerium extraction by TBP and TODGA using a rotating diffusion cell

    Bromley, M. A. & Boxall, C., 12/2015, In: Nukleonika. 60, 4, p. 859-864 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  343. Published

    A Study of Cerium Extraction Kinetics by TODGA in Acidified and Non-Acidified Organic Solvent Phases in the Context of Fission Product Management

    Bromley, M. A. & Boxall, C., 1/11/2018, In: Progress in Nuclear Science and Technology. 5, p. 70-73 4 p.

    Research output: Contribution to journalJournal articlepeer-review

  344. Published

    A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation

    Hou, X., Hu, H. & Silberschmidt, V., 05/2012, In: Journal of Materials Science. 47, 9, p. 3989–3999 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  345. Published

    A study of multipacting in rectangular waveguide geometries

    Goudket, P. A., 21/09/2004, Lancaster University. 163 p.

    Research output: ThesisDoctoral Thesis

  346. Published

    A study of the effect of precursors on physical and biological properties of mesoporous bioactive glass

    Shah, A. T., Ain, Q., Chaudhry, A. A., Khan, A. F., Iqbal, B., Ahmad, S., Siddiqi, S. A. & Rehman, I., 1/02/2015, In: Journal of Materials Science. 50, 4, p. 1794-1804 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  347. Published

    A study of the sharp yield point of a Ti-22Al-25Nb alloy

    Zong, Y., Shao, B., Tian, Y. & Shan, D., 15/04/2017, In: Journal of Alloys and Compounds. 701, p. 727-731 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  348. Published

    A study of using cosmic-ray muon radiography to detect CO2 leakage from a primary storage into geological formations

    Zhong, J. & Jiang, X., 05/2016, In: Environmental Earth Sciences. 75, 13 p., 912.

    Research output: Contribution to journalJournal articlepeer-review

  349. Published

    A study on helix pitch tolerance impact on TWT small-signal gain

    D'Agostino, S. & Paoloni, C., 12/2002, In: IEEE Electron Device Letters. 23, 12, p. 746-748 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  350. Published

    A study on the effect of zinc oxide and zinc peroxide nanoparticles to enhance angiogenesis-pro-angiogenic grafts for tissue regeneration applications

    Ahtzaz, S., Nasir, M., Shahzadi, L., Amir, W., Anjum, A., Arshad, R., Iqbal, F., Chaudhry, A. A., Yar, M. & Rehman, I. U., 15/10/2017, In: Materials and Design. 132, p. 409-418 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  351. Published

    A study on the implementation of 2-D mesh-based networks-on-chip in the nanometre regime.

    Pamunuwa, D. B., Öberg, J., Millberg, M., Zheng, L-R., Jantsch, A. & Tenhunen, H., 1/10/2004, In: Integration, the VLSI Journal. 38, 1, p. 3-17 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  352. Published

    A SU8 micromachined WR-1.5 band waveguide filter

    Shang, X., Tian, Y., Lancaster, M. J. & Singh, S., 2013, In: IEEE Microwave and Wireless Components Letters. 23, 6, p. 300-302 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  353. Published

    A submillimetre wave extended interaction oscillator with novel broadband mechanical tuning

    Perring, D., Phillips, G. & Carter, R. G., 1/12/1990, International Technical Digest on Electron Devices. IEEE, p. 897-900 4 p. (Technical Digest - International Electron Devices Meeting).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  354. Published

    A successive bounding method to find the exact eigenvalues of transcendental stiffness matrix formulations

    Ye, J. & Williams, F. W., 30/03/1995, In: International Journal for Numerical Methods in Engineering. 38, 6, p. 1057-1067 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  355. Published

    A superconducting RF vertical test facility at daresbury laboratory

    Corlett, P. A., Bate, R., Beard, C. D., Fell, B., Goudket, P., Pattalwar, S., Ambattu, P. K., Burt, G., Dexter, A. C. & Tahir, M. I., 1/01/2008, p. 850-852. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  356. Published

    A Surrealist Inspired Mobile Multiplayer Game: Fact or Fish?

    Bamford, W., Coulton, P. & Edwards, R., 06/2006. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  357. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  358. Published

    A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes

    Arifutzzaman, A., Ismail, A. F., Alam, M. Z., Khan, A. A., Saidur, R., C.W., T. (ed.), W., C-T. (ed.), B.S.L., H. (ed.) & X., X. (ed.), 11/12/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  359. Published

    A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, D. D., Yin, M., del Castillo, P. E. J. R. D. & van der Zwaag, S., 15/10/2009, In: Materials Science and Engineering: A. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  360. Published

    A systematic study on the use of short circuiting for the improvement of proton exchange membrane fuel cell performance

    Gupta, G., Wu, B., Mylius, S. & Offer, G. J., 16/02/2017, In: International Journal of Hydrogen Energy. 42, 7, p. 4320-4327 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  361. Published

    A systems approach to environmental engineering.

    Bradshaw, A., Burge, S. E., Chotai, A. & Young, P. C., 1994, Proceedings of the 1st conference of the forum for environmental engineering education. Dundee, p. 35-42 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  362. Published

    A Taxonomy of Objectives for Professional Education

    Carter, R., 1/01/1985, In: Studies in Higher Education. 10, 2, p. 135-149 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  363. Published

    A Terahertz Chiral Metamaterial modulator

    Kindness, S., Almond, N., Wei, B., Michailow, W., Delfanazari, K., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. & Degl'Innocenti, R., 4/11/2020, In: Advanced Optical Materials. 8, 21, 8 p., 2000581.

    Research output: Contribution to journalJournal articlepeer-review

  364. Published

    A test facility for the international linear collider at SLAC end station a for prototypes of beam delivery and IR components: 36th ICFA Advanced Beam Dynamics Workshop on Nano Scale Beams, NANOBEAM 2005

    Nanobeam Collaboration, 21/10/2020, p. 271-274. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  365. Published

    A thalium-doped sodium iodide well counter for radioactive tracer applications with naturally-abundant 40K

    Parker, A. J., Boxall, C., Joyce, M. & Schotanus, P., 11/09/2013, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 722, p. 5-10 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  366. Published

    A theoretical and computational study of lithium-ion battery thermal management for electric vehicles using heat pipes

    Greco, A., Cao, D., Jiang, X. & Yang, H., 07/2014, In: Journal of Power Sources. 257, p. 344-355 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  367. Published

    A theoretical study of intrinsic point defects and defect clusters in magnesium aluminate spinel

    Gilbert, C. A., Smith, R., Kenny, S. D., Murphy, S. T., Grimes, R. W. & Ball, J. A., 8/07/2009, In: Journal of Physics: Condensed Matter. 21, 27, 7 p., 275406.

    Research output: Contribution to journalJournal articlepeer-review

  368. Published

    A thermal-electrical analogy model of a four-floor building with occupancy estimation for heating system control

    Tate, O., Cheneler, D. & Taylor, C. J., 29/10/2019, In: IFAC-PapersOnLine. 52, 11, p. 91-96 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  369. Published

    A thermodynamic theory for dislocation cell formation and misorientation in metals

    Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 06/2012, In: Acta Materialia. 60, 11, p. 4370-4378 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  370. Published

    A thermostatistical theory for solid solution effects in the hot deformation of alloys: An application to low-alloy steels

    Galindo-Nava, E. I., Perlade, A. & Rivera-Díaz-Del-Castillo, P. E. J., 01/2014, In: Modelling and Simulation in Materials Science and Engineering. 22, 1, 015009.

    Research output: Contribution to journalJournal articlepeer-review

  371. Published

    A thermostatistical theory of low and high temperature deformation in metals

    Galindo-Nava, E. I. & Rivera-Díaz-del-Castillo, P. E. J., 1/05/2012, In: Materials Science and Engineering: A. 543, p. 110-116 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  372. Published

    A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges

    Ye, J. Q., 30/01/1997, In: Computer Methods in Applied Mechanics and Engineering. 140, 3-4, p. 383-392 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  373. Published

    A three-dimensional inverse finite-element method applied to experimental eddy-current imaging data.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J., Ma, X. & Higson, S. R., 05/2006, In: IEEE Transactions on Magnetics. 42, 5, p. 1560 -1567

    Research output: Contribution to journalJournal articlepeer-review

  374. Published

    A three-dimensional model of an articulated frame-steer vehicle for coupled ride and handling dynamic analyses

    Pazooki, A., Rakheja, S. & Cao, D., 2014, In: International Journal of Vehicle Performance. 1, 3-4, p. 264-297 34 p.

    Research output: Contribution to journalJournal articlepeer-review

  375. Published

    A three-dimensional state space finite element solution for laminated composite cylindrical shells

    Sheng, H. Y. & Ye, J. Q., 2003, In: Computer Methods in Applied Mechanics and Engineering. 192, 22-24, p. 2441-2459 19 p.

    Research output: Contribution to journalJournal articlepeer-review

  376. Published

    A time-varying parameter model of a body oscillating in pitch.

    McCabe, A. P., Aggidis, G. A. & Stallard, T. J., 12/2006, In: Applied Ocean Research. 28, 6, p. 359-370 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  377. Published

    A Transition Arm Modular Multilevel Universal Pulse-Waveform Generator for Electroporation Applications

    Elgenedy, M. A., Darwish, A., Ahmed, S. & Williams, B. W., 1/12/2017, In: IEEE Transactions on Power Electronics . 32, 12, p. 8979-8991 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  378. Published

    A transnational approach to the implementation of eco-design methodologies in SMEs

    Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  379. Published

    A transputer based flexible robot controller

    Margrave, F. W. & Nagy, Z., 1996, Fast Reconfiguration of Robotic and Automation Resources, IEE Colloquium on. IET Press, p. 8/1-8/6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  380. Published

    A transputer based, flexible, real-time control system for robotic manipulators.

    Nagy, Z. & Bradshaw, A., 1996, Proceedings of the UK UKACC international conference on control '96. Exeter

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  381. Published

    A traveling wave tube for 92 - 95 GHz band wireless applications

    Paoloni, C., Andre, F., Kohler, S., Krozer, V., Quang, T. L., Letizia, R., Sabaawi, A., Ulisse, G. & Zimmerman, R., 25/09/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  382. Published

    A Two-Stage Approach for the Remaining Useful Life Prediction of Bearings Using Deep Neural Networks

    Xia, M., Li, T., Shu, T., Wan, J., De Silva, C. W. & Wang, Z., 1/06/2019, In: IEEE Transactions on Industrial Informatics. 15, 6, p. 3703-3711 9 p., 8454498.

    Research output: Contribution to journalJournal articlepeer-review

  383. Published

    A unified approach for the linear and nonlinear analysis of plates and shallow shells

    Ye, J., 1993, In: Thin-Walled Structures. 17, 3, p. 223-236 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  384. Published

    A unified formula for calculating bending capacity of solid and hollow concrete-filled steel tubes under normal and elevated temperature

    Yu, M., Pei, X., Xu, L. & Ye, J., 02/2018, In: Journal of Constructional Steel Research. 141, p. 216-225 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  385. Published

    A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & Li, Y., 04/2013, In: Engineering Structures. 49, p. 1-10 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  386. Published

    A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & She, C., 04/2010, In: Engineering Structures. 32, 4, p. 1046-1053 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  387. Published

    A unified interaction equation for strength and global stability of solid and hollow concrete-filled steel tube columns under room and elevated temperatures

    Yu, M., Xu, H., Ye, J. & Chi, Y., 1/09/2018, In: Journal of Constructional Steel Research. 148, p. 304-313 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  388. Published

    A unified method for calculating fire resistance of solid and hollow concrete-filled steel tube columns based on average temperature

    Yu, M., Zha, X., Ye, J. & Wang, B., 15/07/2014, In: Engineering Structures. 71, p. 12-22 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  389. Published

    A unified method for calculating the fire resistance of concrete-filled steel tube with fire protection under combined loading

    Yu, M., Hu, X., Chi, Y. & Ye, J., 31/05/2020, In: Journal of Constructional Steel Research. 168, 17 p., 106003.

    Research output: Contribution to journalJournal articlepeer-review

  390. Published

    A unified theory for microstructural alterations in bearing steels under rolling contact fatigue

    Fu, H. & Rivera-Díaz-del-Castillo, P. E. J., 15/08/2018, In: Acta Materialia. 155, p. 43-55 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  391. Published

    A verified model of laser direct metal deposition using an analytical enthalpy balance method

    Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  392. Published

    A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  393. Published

    A verified model of transient and residual stresses in laser direct metal deposition

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper 304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  394. Published

    A Very Broadband Matched Termination Utilizing Non-Grounded Radial Lines

    Giannini, F., Paoloni, C. & Ruggieri, M., 1/09/1987, Microwave Conference, 1987. 17th European. IEEE, p. 1027-1031 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  395. Published

    A vision-based positioning system with inverse dead-zone control for dual-hydraulic manipulators

    West, C., Monk, S. D., Montazeri, A. & Taylor, C. J., 5/09/2018, 2018 UKACC 12th International Conference on Control (CONTROL). IEEE, p. 379-384 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  396. Published

    A water-soluble core material for manufacturing hollow composite sections

    Xiao, Z., Harper, L. T., Kennedy, A. R. & Warrior, N. A., 15/12/2017, In: Composite Structures. 182, p. 380-390 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  397. Published

    A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination.

    Shippen, D. I., Joyce, M. J. & Aspinall, M., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  398. Published

    A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination.

    Shippen, D. I., Joyce, M. J. & Aspinall, M., 10/2010, In: IEEE Transactions on Nuclear Science. 57, 5, p. 2617-2624 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  399. Published

    A Wideband Conical Beam Cylindrical Dielectric Resonator Antenna

    Ambattu, P., Hamsakutty, V., Yohannan, J. & Mathew, KT., 2007, In: IEEE Antennas and Wireless Propagation Letters. 6, p. 15-17 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  400. Published

    A world first: Swansea Bay Tidal lagoon in review

    Waters, S. & Aggidis, G. A., 04/2016, In: Renewable and Sustainable Energy Reviews. 56, p. 916-921 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  401. Published

    Ab initio simulations of the degradation of biodegradable batteries

    Deacon, B., 2021, Lancaster University. 187 p.

    Research output: ThesisMaster's Thesis

  402. Published

    ABA regulated gene expression in stomatal guard cells of Commelina communis.

    Renwick, K. F., Webb, A. A. R., Sarsag, M., Shirras, A. D., Mansfield, T. A. & Hetherington, A. M., 1992, In: Journal of Experimental Botany. 43, Supple, p. P10.64

    Research output: Contribution to journalJournal article

  403. Published

    ABA-signalling in guard cells.

    Hunt, L., Gray, J. E., Mills, L. N., McAinsh, M. & Hetherington, A. M., 02/2003, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 134, 1, p. S136

    Research output: Contribution to journalJournal articlepeer-review

  404. Published

    Abscisic acid induces oscillations in guard-cell cytosolic free calcium that involve phosphoinositide-specific phospholipase C.

    Staxen, I., Pical, C., Montgomery, L. T., Gray, J. E., Hetherington, A. M. & McAinsh, M., 16/02/1999, In: Proceedings of the National Academy of Sciences of the United States of America. 96, 4, p. 1779-1784 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  405. Published

    Abscisic acid-induced elevation of guard cell cytosolic Ca2+ precedes stomatal closure.

    McAinsh, M. R., Brownlee, C. & Hetherington, A. M., 11/01/1990, In: Nature. 343, 6254, p. 186-188 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  406. Published

    Abscisic acid-mediates stomatal closure mediated by cyclic ADP-ribose.

    Leckie, C. P., McAinsh, M. R., Allen, G. J., Sanders, D. & Hetherington, A. M., 22/12/1998, In: Proceedings of the National Academy of Sciences of the United States of America. 95, 26, p. 15837-15842 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  407. Published

    Absorption of energy from irregular waves by a buoyant, surging body.

    Meadowcroft, J. A., Stallard, T. J., Baker, N. J. & Aggidis, G. A., 2006, Proceedings of the 16th international offshore and polar engineering conference (ISOPE)..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  408. Published

    Absorption saturation properties and laser Q-switch performance of Cr5+-doped YVO4 crystal

    Zolotovskaya, S., Yumashev, K. V., Kuleshov, N. V., Matrosov, V. N., Matrosova, T. A. & Kupchenko, M. I., 03/2007, In: Applied Physics B. 86, 4, p. 667-671 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  409. Published

    AC analysis of time discrete systems

    Olbrich, T., Harvey, R. J. A. & Richardson, A. M. D., 1995, In: IEE Seminar Digests. 1995, 192, p. 1 1 p.

    Research output: Contribution to journalJournal articlepeer-review

  410. Published

    Acceleration of electrons in the plasma wakefield of a proton bunch

    Adli, E., Apsimon, R. J., Burt, G. C., Dexter, A. C., Mitchell, J. & Pitman, S., 29/08/2018, In: Nature. 561, p. 363-367 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  411. Published

    Acceleration of relativistic beams using laser-generated terahertz pulses

    Hibberd, M. T., Healy, A. L., Lake, D. S., Georgiadis, V., Smith, E. JH., Finlay, O. J., Pacey, T. H., Jones, J. K., Saveliev, Y., Walsh, D. A., Sneddon, E. W., Appleby, R. B., Burt, G., Graham, D. M. & Jamison, S., 1/12/2020, In: Nature Photonics. 14, p. 755–759 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  412. Published

    Acceleration technologies for charged particles: An introduction

    Carter, R. G., 1/01/2011, In: Contemporary Physics. 52, 1, p. 15-41 27 p.

    Research output: Contribution to journalReview articlepeer-review

  413. Published

    Accommodation of tin in tetragonal ZrO2

    Bell, B. D. C., Murphy, S. T., Burr, P. A., Grimes, R. W. & Wenman, M. R., 28/02/2015, In: Journal of Applied Physics. 117, 8, 7 p., 084901.

    Research output: Contribution to journalJournal articlepeer-review

  414. Published

    Accounting for the unique, doubly dual nature of ionic liquids from a molecular thermodynamic, and modeling standpoint

    Rebelo, L. P. N., Lopes, J. N. C., Esperanca, J. M. S. S., Guedes, H. J. R., Lachwa, J., Najdanovic-Visak, V. & Visak, Z. P., 11/2007, In: Accounts of Chemical Research. 40, 11, p. 1114-1121 8 p.

    Research output: Contribution to journalLiterature reviewpeer-review

  415. Published

    Accuracy improvement of machine tools by computer real-time control.

    Zhang, C., Margrave, F. W. & Bradshaw, A., 1994, Proceedings of the annual meeting of the American society for precision engineers. Cincinnati

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  416. Published

    Accuracy of design sensitivity for optimization of structural using small strain theory by finite element method

    Bhagate, K. A., Pawar, P., Singh, A. K. & Ye, J., 2006, III European Conference on Computational Mechanics : Solids, Structures and Coupled Problems in Engineering: Book of Abstracts. Motasoares, C. A., Martins, J. A. C., Rodrigues, H. C., Ambrósio, J. A. C., Pina, C. A. B., Motasoares, C. M., Pereira, E. B. R. & Folgado, J. (eds.). Berlin: Springer, p. 711-711 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  417. Published

    Accuracy of microwave cavity perturbation measurements.

    Carter, R. G., 05/2001, In: IEEE Transactions on Microwave Theory and Techniques. 49, 5, p. 918-923 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  418. Published

    Accurate a priori signal integrity estimation using a multilevel dynamic interconnect model for deep submicron VLSI design.

    Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 2000, Proceedings of the 26th European Solid-State Circuits Conference, 2000. ESSCIRC '00.. IEEE, p. 352-355 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  419. Published

    Accurate analysis of helix slow-wave structures

    D'Agostino, S., Emma, F. & Paoloni, C., 07/1998, In: IEEE Transactions on Electron Devices. 45, 7, p. 1605-1613 9 p.

    Research output: Contribution to journalJournal articlepeer-review

  420. Published

    Accurate analysis of plasmonic devices with a new Drude Critical Points MRTD method

    Letizia, R. & Pinto, D., 2012, In: IEEE Photonics Technology Letters. 24, 18, p. 1587-1590 4 p.

    Research output: Contribution to journalLetterpeer-review

  421. Published

    Accurate Backward-Wave Interaction Impedance Computation for Corrugated Rectangular Waveguides

    Paoloni, C., 09/2012, 5th UK/Europe-China Workshop on Millimeter Waves and Terahertz Technologies. China

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  422. Published

    Accurate crab cavity modeling for the high luminosity Large Hadron Collider

    Brett, D. R., Appleby, R. B., De Maria, R., Barranco Garcia, J., Tomas Garcia, R., Hall, B. & Burt, G., 2/10/2014, In: Physical Review Special Topics: Accelerators and Beams. 17, 10, 12 p., 104001.

    Research output: Contribution to journalJournal articlepeer-review

  423. Published

    Accurate finite element time domain modelling of resonant photonic bandgap cavities

    Pinto, D. & Obayya, S., 2005. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  424. E-pub ahead of print

    Accurate Modelling of Monotron Oscillations in Small and Large Signal regimes

    Cai, J., Syratchev, I. & Burt, G., 20/02/2020, In: IEEE Transactions on Electron Devices. 7 p.

    Research output: Contribution to journalJournal articlepeer-review

  425. Published

    Accurate Multiresolution Time Domain Analysis of Microcavity Ring Resonator

    Letizia, R., Obayya, S. & Abujnah, N., 07/2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  426. Published

    Accurate perfectly matched layer finite-volume time-domain method for photonic bandgap devices

    Pinto, D. & Obayya, S., 03/2008, In: IEEE Photonics Technology Letters. 20, 5, p. 339-341 3 p.

    Research output: Contribution to journalLetterpeer-review

  427. Published

    Accurate simulations of TEPC neutron spectra using Geant4

    Taylor, G. C., Hawkes, N. & Shippen, A., 11/2015, In: Radiation Physics and Chemistry. 116, p. 186-188 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  428. Published

    Accurate vehicular positioning using a DAB-GSM hybrid system

    Rooney, S., Chippendale, P., Choony, R., Roux, C. L. & Honary, B., 05/2000, Vehicular Technology Conference Proceedings, 2000. VTC 2000-Spring Tokyo. 2000 IEEE 51st. Tokyo, Japan: IEEE, p. 97-101 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  429. Published

    Acetohydroxamatoiron(III) complexes : thermodynamics of formation and temperature dependent speciation.

    Andrieux, F. P. L., Boxall, C. & Taylor, R. J., 11/2008, In: Journal of Solution Chemistry. 37, 11, p. 1511-1527 17 p.

    Research output: Contribution to journalJournal articlepeer-review

  430. Published

    Achieving dynamic inter-organizational workflow management by integrating business processes, events and rules

    Meng, J., Su, S. Y. W., Lam, H., Helal, A., R.H., S. (ed.) & [Unknown], 2002, 35th Annual Hawaii International Conference on System Sciences, HICSS 2002. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  431. Published

    Acid catalysed synthesis of bioactive glass by evaporation induced self assembly method

    Shah, A. T., Ain, Q., Chaudhry, A. A., Ahmad, S., Zarif, F., Siddiqi, S. A., bin Qasim, S., Goerke, O., Khan, A. S. & Rehman, I. U., 1/01/2018, In: Journal of Non-Crystalline Solids. 479, p. 1-8 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  432. Published

    Acoustic Monitoring of Joint Health

    Spain, L. & Cheneler, D., 17/03/2021, Data Acquisition: Recent Advances and Applications in Biomedical Engineering. Płaczek, B. (ed.). InTech

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  433. Published

    Acoustic system for online wiring test on aircraft.

    Xu, Z., Koltsov, D., Richardson, A. & Sutherland, A., 18/06/2008, IEEE 14th International Mixed-Signals, Sensors, and Systems Test Workshop, 2008. IMS3TW 2008.. IEEE, p. 1-4 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  434. Published

    Action conditional recurrent Kalman networks for forward and inverse dynamics learning

    Shaj, V., Becker, P., Buchler, D., Pandya, H., van Duijkeren, N., Taylor, C. J., Hanheide, M. & Neumann, G., 18/11/2020, Proceedings of Machine Learning Research.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  435. Published

    Action-centred learning in industry.

    Carter, R. G., Cooke, F. & Neal, R., 1996, Management of independent learning. Knight, P. & Tait, J. (eds.). Routledge, 164 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  436. Published

    Actions of abscisic acid and the analogue SD217595 on calcium mediated activity of rat vas deferens smooth muscle.

    Masters, A. K., Huddart, H. & Hetherington, A. M., 05/1994, In: General Pharmacology. 25, 3, p. 481-486 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  437. Published

    Activation in injection area of J-PARC 3-GeV rapid cycling synchrotron and its countermeasures

    Yamamoto, K., Yamakawa, E., Takayanagi, T., Miki, N., Kamiya, J., Saha, P. K., Yoshimoto, M., Yanagibashi, T., Horino, K., Nakanoya, T. & Takeda, O., 26/08/2018, Radiation Protection and Shielding Division 20th Topical Meeting. American Nuclear Society

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  438. Published

    Active Control of Electromagnetically Induced Transparency in a Terahertz Metamaterial Array with Graphene for Continuous Resonance Frequency Tuning

    Kindness, S., Almond, N., Wei, B., Wallis, R., Michailow, W., Kamboj, V. S., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. A. & Degl'Innocenti, R., 5/11/2018, In: Advanced Optical Materials. 6, 21

    Research output: Contribution to journalJournal articlepeer-review

  439. Published

    Active fast neutron singles assay of 235U enrichment in small samples of triuranium octoxide

    Parker, H. M., Aspinall, M., Couture, A., Cave, F. D., Orr, C., Swinson, D. & Joyce, M. J., 11/2016, In: Progress in Nuclear Energy. 93, p. 59-66 8 p.

    Research output: Contribution to journalJournal articlepeer-review

  440. Published

    Active frequency modulation of metamaterial/graphene optoelectronic device using coupled resonators

    Kindness, S., Almond, N., Wallis, R., Wei, B., Kamboj, V. S., Braeuninger-Weimer, P., Hofmann, S., Beere, HE., Ritchie, D. & Degl'Innocenti, R., 13/05/2018, CLEO: QELS_Fundamental Science 2018: Conference on Lasers and Electro-Optics OSA Terchnical Digest (online) (Optical Society of America, 2018). FW3H.3

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  441. Published

    Active lower order mode damping for the four rod LHC crab cavity

    Dexter, A. C., Burt, G. C. & Apsimon, R. J., 1/02/2017, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 844, p. 62-71 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  442. Published

    Active metamaterial polarization modulators for the Terahertz frequency range

    Kindness, S. J., Almond, N. W., Michailow, W., Wei, B., Braeuninger-Weimer, P., Hofmann, S., Beere, H. E., Ritchie, D. A. & Degl'Innocenti, R., 5/08/2020, In: Journal of Physics: Conference Series. 1571, 1, 4 p., 012003.

    Research output: Contribution to journalConference articlepeer-review

  443. Published

    Active minimization of harmonic sound pressure in a vibro—acoustic finite element model of a rectangular enclosure

    Mohamady, S. & Montazeri, A., 06/2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  444. Published

    Active minimization of periodic sound inside a vibro-acoustic rectangular enclosure using finite element model

    Mohamady, S., Montazeri, A. & Ahmad, R. K. R., 1/12/2010, 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010. p. 280-289 10 p. (39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010; vol. 6).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  445. E-pub ahead of print

    Active Terahertz Modulator and Slow Light Metamaterial Devices with Hybrid Graphene–Superconductor Photonic Integrated Circuits

    Kalhor, S., Kindness, S., Wallis, R., Beere, H., Ghanaatshoar, M., Degl'Innocenti, R., Kelly, M., Hofmann, S., Joyce, H., Ritchie, D. & Delfanazari, K., 8/11/2021, In: Nanomaterials. 11, 18 p., 2999.

    Research output: Contribution to journalJournal articlepeer-review

  446. Published

    Active thermal sensor for improved distributed temperature sensing in haptic arrays

    Cheneler, D. & Ward, M., 2018, In: Journal of Sensors. 2018, p. 9631236 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  447. Published

    Active Vibration Control of a Doubly Curved Composite Shell Stiffened by Beams Bonded With Discrete Macro Fiber Composite Sensor/Actuator Pairs

    Daraji, A. H. A., Hale, J. M. & Ye, J., 2018, In: Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME. 140, 12, 11 p.

    Research output: Contribution to journalJournal articlepeer-review

  448. Published

    Adaptive biomedical treatment and robust control

    Clairon, Q., Wilson, E. D., Henderson, R. & Taylor, C. J., 07/2017, In: IFAC-PapersOnLine. 50, 1, p. 12191-12196 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  449. Forthcoming

    Adaptive Closed-Loop Identification and Tracking Control of an Aerial Vehicle with Unknown Inertia Parameters

    Imran, I., Stolkin, R. & Montazeri, A., 6/04/2021, (Accepted/In press) In: IFAC-PapersOnLine.

    Research output: Contribution to journalJournal articlepeer-review

  450. Published

    Adaptive frequency domain identification for ANC systems using non-stationary signals

    Montazeri, A. & Karna, S., 7/12/2015, 2015 IEEE International Symposium on Signal Processing and Information Technology (ISSPIT). IEEE, p. 528-533 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  451. Published

    Adaptive Gas and Fluidic Suspension Systems with Independent Stiffness and Height Tunings

    Khajepour, A., Yin, Z., Cao, D. & Ebrahimi, B., 2012

    Research output: Patent

  452. Published

    Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  453. Published

    Adaptive Materials: Utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Rennie, A. & Anwar, J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  454. Published

    Adaptive multi-functional nested coding and synchronisation

    Honary, B., Darnell, M., Markarian, G. & B. Honary, M. Darnell, and G. Markarian (Patent applicant), 1996, Patent No. 9625936.1

    Research output: Patent

  455. Published

    Adaptive nested trellis decoding for block codes.

    Honary, B., Markarian, G. S. & Darnell, M., 1994, IEEE Global Telecommunications Conference, 1994. GLOBECOM '94. 'Communications: The Global Bridge'. IEEE, Vol. 2. p. 682-686 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  456. Published

    Adaptive Neural Prescribed Performance DSC for Non-Affine SISO Nonlinear Systems with External Disturbances

    Tooranjipour, P., Vatankhah, R., Arefi, M. & Montazeri, A., 2018, In: IFAC-PapersOnLine. 51, 15

    Research output: Contribution to journalJournal articlepeer-review

  457. Published

    Adaptive PIP control with application to greenhouse systems and dynamic traffic management

    Taylor, J. & Chotai, A., 10/04/1997, IEE Colloquium on Adaptive Controllers in Practice, Digest No 97/176. Institution of Electrical Engineers (IEE), 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  458. Published

    Adaptive treatment and robust control

    Clairon, Q., Henderson, R., Young, N., Wilson, E. & Taylor, C. J., 30/03/2021, In: Biometrics. 77, 1, p. 223-236 14 p.

    Research output: Contribution to journalJournal articlepeer-review

  459. Published

    Adaptive Volterra-Laguerre modeling for NMPC

    Montazeri, A., Mahmoodi, S., Poshtan, J., Poshtan, M. & Jahed-Motlagh, M., 2007, Signal Processing and Its Applications, 2007. ISSPA 2007. 9th International Symposium on. New York: IEEE, p. 1322-1325 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  460. Published

    Adding Value to Digestate and Ash (the AVAnD project): elucidating the role and the value of alternative fertilisers on the soil-plant system

    Lag Brotons, A., Marshall, R., Herbert, B., Hurst, L., Inam, E. J. & Semple, K., 2020, Resource Recovery from Wastes: Towards a Circular Economy. Macaskie, L. E., Sapsford, D. J. & Mayes, W. M. (eds.). London: Royal Society of Chemistry, 28 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  461. Published

    Addition of 2-deoxy-d-ribose to clinically used alginate dressings stimulates angiogenesis and accelerates wound healing in diabetic rats

    Azam, M., Dikici, S., Roman, S., Mehmood, A., Chaudhry, A. A., U Rehman, I., MacNeil, S. & Yar, M., 1/10/2019, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 34, 4, p. 463-475 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  462. Unpublished

    Additive manufacturing in assistive product design development

    Sembiring, E., Rennie, A. & Laha, S., 12/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  463. Published

    Additive manufacturing of multielectrode arrays for biotechnological applications

    Edwards, A., Hann, C., Ivill, H., Leeson, H., Tymczyszyn, L., Cummings, D., Ashton, M., Harper, G., Spencer, D., Low, W. L., Rajeev, K., Martin-Hirsch, P., Edwards, F., Hardy, J., Rennie, A. & Cheneler, D., 7/03/2021, In: Materials Advances. 2021, 2, p. 1600-1605 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  464. Published

    Additive manufacturing technologies and functional analysis used in product development optimization

    Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  465. Published

    Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis

    Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.

    Research output: Contribution to journalJournal articlepeer-review

  466. Published

    Addressing the difficulties in using inductive methods to evaluating human body composition.

    Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, In: Biométrie Humaine et Anthropologie. 21, p. 69-77 9 p.

    Research output: Contribution to journalJournal article

  467. Published

    Addressing the difficulties in using inductive methods to evaluating human body composition.

    Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, Proceedings of the international conference on robotics, vision, information and signal processing (ROVISP 2003).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  468. Published

    Addressing the difficulties in using inductive methods to evaluating human body composition.

    Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2002, Proceedings of the 9th symposium of the société de biométrie humaine.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  469. Published

    Ad-hoc Boundary Conditions for CFD Analyses of Turbomachinery Problems with Strong Flow Gradients at Farfield Boundaries

    Campobasso, S. & Baba-Ahmadi, M., 20/04/2011, In: Journal of Turbomachinery. 133, 4, 9 p., 041010 .

    Research output: Contribution to journalJournal articlepeer-review

  470. Published

    Adiabatic and Isothermal Ion-acoustic Speeds of Stable Farley-Buneman Waves in the Auroral E Region

    Robinson, T. R. & Honary, F., 1993, In: Journal of Atmospheric and Terrestrial Physics. 55, 1, p. 65-77 13 p.

    Research output: Contribution to journalJournal articlepeer-review

  471. Published

    Adsorption of Cd(II) and Pb(II) ions from aqueous solutions using mesoporous activated carbon adsorbent: Equilibrium, kinetics and characterisation studies

    Asuquo, E. D., Martin, A. D., Nzerem, P., Siperstein, F. & Fan, X., 02/2017, In: Journal of Environmental Chemical Engineering. 5, 1, p. 679-698 20 p.

    Research output: Contribution to journalJournal articlepeer-review

  472. Published

    Advanced bandwidth efficient block coded modulation over fading channels

    Edwards, R., Honary, B., Farquhar, S. & Noble, A., 11/1997, MILCOM 97 Proceedings. Monterey, California: IEEE, Vol. 2. p. 808-811 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  473. Published

    Advanced digital controllers for servo-pneumatic actuated machines.

    Bradshaw, A. & Counsell, J. M., 1993, Proceedings of IMechE seminar on machine actuators. London, p. 5-9 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  474. Published

    Advanced materials for fluid machinery.

    Aggidis, G. A., 2004, Proceedings of the international symposium on advanced materials for fluid machinery.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  475. Published

    Advanced process control for ultrafiltration membrane water treatment system

    Chew, C. M., Aroua, M. K. & Hussain, M. A., 1/04/2018, In: Journal of Cleaner Production. 179, p. 63-80 18 p.

    Research output: Contribution to journalJournal articlepeer-review

  476. Published

    Advanced Rio-Imaging Experiment in Scandinavia (ARIES): System specification and scientific goals

    Honary, F., Chapman, P., Grill, M., Barratt, K., Marple, S., Nielsen, E. & Hagfors, T., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  477. Published

    Advanced static and dynamic analysis method for helical springs of non-linear geometries

    Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.

    Research output: Contribution to journalJournal articlepeer-review

  478. Published

    Advanced Suspension Systems and Dynamics for Future Road Vehicles

    Cao, D. (ed.) & Song, X. (ed.), 2011, In: Vehicle System Dynamics. 49, 1-2, p. 1-418 418 p.

    Research output: Contribution to journalSpecial issuepeer-review

  479. Published

    Advanced vehicle handling dynamics and control

    Cao, D. (ed.), Rakheja, S. (ed.) & Yang, X. (ed.), 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-366 366 p.

    Research output: Contribution to journalSpecial issuepeer-review

  480. Published

    Advancement of Oscillating Water Column Wave Energy Technologies through Integrated Applications and Alternative Systems

    Doyle, S. & Aggidis, G., 22/12/2020, In: International Journal of Energy and Power Engineering. 14, 12, p. 401-412 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  481. Published
  482. Published

    Advances in 3D Graphics for Smartphones.

    Chehimi, F., Coulton, P. & Edwards, R., 04/2006, Information and Communication Technologies, 2006. ICTTA '06. 2nd. IEEE, p. 99-104 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  483. Published

    Advances in constitutive modeling of plasticity for forming applications

    Barlat, F., Jeong, Y., Ha, J., Tomé, C., Lee, M-G. & Wen, W., 1/01/2017, In: Key Engineering Materials. 725, p. 3-14 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  484. Published

    Advances in Fourier transform infrared (FTIR) spectroscopy of biological tissues

    Talari, A. C. S., Martinez, M. A. G., Movasaghi, Z., Rehman, S. & Rehman, I. U., 1/06/2017, In: APPLIED SPECTROSCOPY REVIEWS. 52, 5, p. 456-506 51 p.

    Research output: Contribution to journalJournal articlepeer-review

  485. Published

    Advances in ionospheric propagation modelling at high-latitudes

    Ritchie, S. E. & Honary, F., 28/04/2009, p. 32-38. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  486. Published

    Advances in the modelling of laser direct metal deposition (invited)

    Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.

    Research output: Contribution to journalJournal articlepeer-review

  487. Published
  488. Published

    Advances of proteomic sciences in dentistry

    Khurshid, Z., Zohaib, S., Najeeb, S., Zafar, M. S., Rehman, R. & Ur Rehman, I., 13/05/2016, In: International Journal of Molecular Sciences. 17, 5, 19 p., 728.

    Research output: Contribution to journalJournal articlepeer-review

  489. Published

    Advancing cancer diagnostics with artificial intelligence and spectroscopy: identifying chemical changes associated with breast cancer

    Talari, A. C. S., Rehman, S. & Rehman, I. U., 30/09/2019, In: Expert Review of Molecular Diagnostics. 19, 10, p. 929-940 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  490. E-pub ahead of print

    Adversarial domain-invariant generalization: a generic domain-regressive framework for bearing fault diagnosis under unseen conditions

    Chen, L., Li, Q., Shen, C., Zhu, J., Wang, D. & Xia, M., 11/05/2021, In: IEEE Transactions on Industrial Informatics. 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  491. Published

    Aerodynamic design optimization of wind turbine rotors under geometric uncertainty

    Campobasso, S., Minisci, E. & Caboni, M., 01/2016, In: Wind Energy. 19, 1, p. 51-65 15.

    Research output: Contribution to journalJournal articlepeer-review

  492. Published

    AFM measurement of nanoscale topographical and material wear features

    Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  493. Published

    Aggregation and adhesion of gold nanoparticles in phosphate buffered saline

    Du, S., Kendall, K., Toloueinia, P., Mehrabadi, Y., Gupta, G. & Newton, J., 14/02/2012, In: Journal of Nanoparticle Research. 14, 758.

    Research output: Contribution to journalJournal articlepeer-review

  494. Published

    Agile collaborative autonomous agents for robust underwater classification scenarios

    Carline, D., Angelov, P. & Clifford, R., 06/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  495. Published

    AGR Cladding Corrosion: Investigation of the Effect of Temperature on Unsensitized Stainless Steel

    Howett, E., Boxall, C. & Hambley, D., 2017, In: MRS Advances. 2, 11, p. 615-620 6 p.

    Research output: Contribution to journalJournal articlepeer-review

  496. Published

    Agro-food wastes utilization by Blakeslea trispora for carotenoids production

    Papaioannou, E. H. & Liakopoulou-Kyriakides, M., 2012, In: Acta Biochimica Polonica. 59, 1, p. 151-153 3 p.

    Research output: Contribution to journalJournal articlepeer-review

  497. Published

    Aiding student conceptualisation of the mobile channel and the operation of a RAKE receiver using a project developed in SIMULINK®.

    Coulton, P., Khirallah, C. & Edwards, R., 07/2005, In: International Journal of Electrical Engineering Education. 42, 3, p. 211-222 12 p.

    Research output: Contribution to journalJournal articlepeer-review

  498. Published

    Airflow measurement across negatively infiltration processed porous aluminum structures

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/04/2019, In: AIChE Journal. 65, 4, p. 1355-1364 10 p.

    Research output: Contribution to journalJournal articlepeer-review

  499. Published

    Air-Stable Solution-Processed Hybrid Transistors with Hole and Electron Mobilities Exceeding 2 cm(2) V-1 s(-1)

    Smith, J., Bashir, A., Adamopoulos, G., Anthony, J. E., Bradley, D. D. C., Hamilton, R., Heeney, M., McCulloch, I. & Anthopoulos, T. D., 24/08/2010, In: Advanced Materials. 22, 32, p. 3598-3602 5 p.

    Research output: Contribution to journalJournal articlepeer-review

  500. Published

    AKR breakup and auroral particle acceleration at substorm onset

    Morioka, A., Miyoshi, Y., Tsuchiya, F., Misawa, H., Yumoto, K., Parks, G. K., Anderson, R. R., Menietti, J. D., Donovan, E. F., Honary, F. & Spanswick, E., 9/09/2008, In: Journal of Geophysical Research. 113, A9, p. A09213

    Research output: Contribution to journalJournal articlepeer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Back to top