School of Engineering

View graph of relations

Faculty of Science and Technology

Show 7 centres, groups and clusters

Hide 7 centres, groups and clusters

1 - 100 out of 5,748Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

In Press/Forthcoming
Unpublished
Development towards Improved Respiratory Protective Equipment to resolve problems with industry standard following the COVID-19 pandemic
James, L., expected in 2027, (Unpublished) Lancaster University. 129 p.
Research output: Thesis › Master's Thesis
2023
Published
Development and Validation of an Electrical Energy Harvesting System Utilising the Seebeck Effect for use in AUV/Submarines
Kelly, J., 1/10/2023, Lancaster University. 107 p.
Research output: Thesis › Master's Thesis
Published
Effects of defects on the transverse mechanical response of unidirectional fibre-reinforced polymers: DEM simulation and deep learning prediction
Ding, X., Gu, Z., Hou, X., Xia, M., Ismail, Y. & Ye, J., 1/10/2023, In: Composite Structures. 321, 117301.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Biochar-facilitated batch co-digestion of food waste and cattle rumen content: An assessment of process stability, kinetic studies, and pathogen fate
Ihoeghian, N. A., Amenaghawon, A. N., Ogofure, A., Oshoma, C. E., Ajieh, M. U., Erhunmwunse, N. O., Obuekwe, I. S., Edosa, V. I. O., Tongo, I., Emokaro, C., Ezemonye, L. I. N., Semple, K. T. & Martin, A. D., 30/09/2023, In: Green Technologies and Sustainability. 1, 3, 100035.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Case study for effects of pile installation on existing offshore facilities in brownfields
Reda, A., Amaechi, C. V. & Shahin, M. A., 30/09/2023, In: Applied Ocean Research. 138, 103651.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Enhancing methanol oxidation reaction with platinum–ruthenium embedded MXene: Synthesis, characterization, and electrochemical properties
Abdullah, N., Saidur, R., Zainoodin, A. M., Tan, K. H. & Pandey, A. K., 30/09/2023, In: Journal of physics and chemistry of solids. 180, 111434.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Estimates of energy fluxes associated with sprites in the mesosphere
Mashao, D., Kosch, M. & Füllekrug, M., 30/09/2023, In: Journal of Atmospheric and Solar-Terrestrial Physics. 250, 106122.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Noise-Boosted Convolutional Neural Network for Edge-based Motor Fault Diagnosis with Limited Samples
Chen, L., An, K., Huang, D., Wang, X., Xia, M. & Lu, S., 30/09/2023, In: IEEE Transactions on Industrial Informatics. 19, 9, p. 9491-9502 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Osteogenic and antibacterial scaffolds of silk fibroin/Ce-doped ZnO for bone tissue engineering
Sarfaraz, S., Khan, A., Hameed, F., Arshad, A., Mutahir, Z., Zeeshan, R., Ijaz, K., Chaudhry, A. A., Khalid, H., Rehman, I. & Khan, A., 30/09/2023, In: International Journal of Polymeric Materials and Polymeric Biomaterials. 72, 15, p. 1205-1216 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State-of-the-art review of composite marine risers for floating and fixed platforms in deep seas
Amaechi, C. V., Reda, A., Shahin, M. A., Sultan, I. A., Beddu, S. B. & Ja'e, I. A., 30/09/2023, In: Applied Ocean Research. 138, 18 p., 103624.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Whey protein isolate/calcium silicate hydrogels for bone tissue engineering applications – preliminary evaluation in vitro
Ivory-Cousins, T., Nurzynska, A., Klimek, K., Baines, D., Truszkiewicz, W., Palka, K. & Douglas, T., 29/09/2023, In: Materials. 16, 19, 6484.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Towards a muon collider
Accettura, C., Adams, D., Agarwal, R., Ahdida, C., Aimè, C., Amapane, N., Amorim, D., Andreetto, P., Anulli, F., Appleby, R., Apresyan, A., Apyan, A., Arsenyev, S., Asadi, P., Mahmoud, M. A., Azatov, A., Back, J., Balconi, L., Bandiera, L., Barlow, R., & 280 othersBartosik, N., Barzi, E., Batsch, F., Bauce, M., Berg, J. S., Bersani, A., Bertarelli, A., Bertolin, A., Black, K., Boattini, F., Bogacz, A., Bonesini, M., Bordini, B., Bottaro, S., Bottura, L., Braghieri, A., Breschi, M., Bruhwiler, N., Buffat, X., Buonincontri, L., Burrows, P. N., Burt, G., Buttazzo, D., Caiffi, B., Calviani, M., Calzaferri, S., Calzolari, D., Capdevilla, R., Carli, C., Casaburo, F., Casarsa, M., Castelli, L., Catanesi, M. G., Cavallucci, L., Cavoto, G., Celiberto, F. G., Celona, L., Cerri, A., Cesarini, G., Cesarotti, C., Chachamis, G., Chance, A., Chen, S., Chien, Y-T., Chiesa, M., Colaleo, A., Collamati, F., Collazuol, G., Costa, M., Craig, N., Curatolo, C., Curtin, D., Da Molin, G., Dam, M., Damerau, H., Dasu, S., de Blas, J., De Curtis, S., De Matteis, E., De Rosa, S., Delahaye, J-P., Denisov, D., Denizli, H., Densham, C., Dermisek, R., Di Luzio, L., Di Meco, E., Di Micco, B., Dienes, K., Diociaiuti, E., Dorigo, T., Dudarev, A., Edgecock, R., Errico, F., Fabbrichesi, M., Farinon, S., Ferrari, A., Somoza, J. A. F., Filthaut, F., Fiorina, D., Fol, E., Forslund, M., Franceschini, R., Ximenes, R. F., Gabrielli, E., Gallinaro, M., Garosi, F., Giambastiani, L., Gianelle, A., Gilardoni, S., Giove, D. A., Giraldin, C., Glioti, A., Greco, M., Greljo, A., Groeber, R., Grojean, C., Grudiev, A., Gu, J., Han, C., Han, T., Hauptman, J., Henning, B., Hermanek, K., Herndon, M., Holmes, T. R., Homiller, S., Huang, G., Jana, S., Jindariani, S., Jurj, P. B., Kahn, Y., Karpov, I., Kelliher, D., Kilian, W., Kolehmainen, A., Kong, K., Koppenburg, P., Kreher, N., Krintiras, G., Krizka, K., Krnjaic, G., Kuchma, B. T., Kumar, N., Lechner, A., Lee, L., Li, Q., Voti, R. L., Lipton, R., Liu, Z., Lomte, S., Long, K., Gomez, J. L., Losito, R., Low, I., Lu, Q., Lucchesi, D., Ma, L., Ma, Y., Machida, S., Maltoni, F., Mandurrino, M., Mansoulie, B., Mantani, L., Marchand, C., Mariotto, S., Martin-Haugh, S., Marzocca, D., Mastrapasqua, P., Mauro, G., Mazzolari, A., McGinnis, N., Meade, P., Mele, B., Meloni, F., Mentink, M., Merlassino, C., Metral, E., Miceli, R., Milas, N., Mokhov, N., Montella, A., Mulder, T., Musenich, R., Nardecchia, M., Nardi, F., Neufeld, N., Neuffer, D., Novelli, D., Onel, Y., Orestano, D., Paesani, D., Griso, S. P., Palmer, M., Panci, P., Panico, G., Paparella, R., Paradisi, P., Passeri, A., Pastrone, N., Pellecchia, A., Piccinini, F., Portone, A., Potamianos, K., Prioli, M., Quettier, L., Radicioni, E., Radogna, R., Rattazzi, R., Redigolo, D., Reina, L., Resseguie, E., Reuter, J., Ribani, P. L., Riccardi, C., Ricci, L., Ricciardi, S., Ristori, L., Robens, T. N., Rodejohann, W., Rogers, C., Romagnoni, M., Ronald, K., Rossi, L., Ruiz, R., Queiroz, F. S., Sala, F., Salko, J., Salvini, P., Salvioni, E., Santiago, J., Sarra, I., Esteban, F. J. S., Schieck, J., Schulte, D., Selvaggi, M., Senatore, C., Senol, A., Sertore, D., Sestini, L., Sharma, V., Shiltsev, V., Shu, J., Simone, F. M., Simoniello, R., Skoufaris, K., Sorbi, M., Sorti, S., Stamerra, A., Stapnes, S., Stark, G. H., Statera, M., Stechauner, B., Stolarski, D., Stratakis, D., Su, S., Su, W., Sumensari, O., Sun, X., Sundrum, R., Swiatlowski, M. J., Sytov, A., Tait, T. M. P., Tang, J., Tang, J., Tesi, A., Testoni, P., Thomas, B., Thompson, E. A., Torre, R., Tortora, L., Tortora, L., Trifinopoulos, S., Vai, I., Valente, M., Valente, R. U., Valenti, A., Valle, N., Rienen, U. V., Venditti, R., Verweij, A., Verwilligen, P., Vittorio, L., Vitulo, P., Wang, L., Weber, H., Wozniak, M., Wu, R., Wu, Y., Wulzer, A., Xie, K., Yamamoto, A., Yang, Y., Yonehara, K., Yoon, S., Zaza, A., Zhao, X., Zlobin, A., Zuliani, D. & Zurita, J., 26/09/2023, In: European Physical Journal C: Particles and Fields. 83, 9, 864.
Research output: Contribution to Journal/Magazine › Review article › peer-review
E-pub ahead of print
Uniaxial constitutive model for fiber reinforced concrete: A physics-based data-driven framework
Yu, C., Yu, M., Li, X., Xu, L., Liu, S. & Ye, J., 24/11/2023, In: Construction and Building Materials. 406, 133377.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Microscopic failure characteristics and critical length of short glass fiber reinforced composites
Cai, H., Ye, J., Wang, Y., Shi, Y. & Saafi, M., 30/11/2023, In: Composites Part B: Engineering. 266, 110973.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Morphological characterization and reconstruction of fractured heat-treated glass
Zhu, Y., Yang, J., Wang, X-E., Xie, D. & Hou, X., 15/09/2023, In: Journal of Non-Crystalline Solids. 616, 18 p., 122455.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Enhanced oxygen reduction reaction catalyst stability and durability of MXene-supported Fe-N-C catalyst for proton exchange membrane fuel cell application
Ahmad Junaidi, N. H., Wong, W. Y., Loh, K. S., Rahman, S., Choo, T. F. & Wu, B., 15/12/2023, In: Journal of Alloys and Compounds. 968, 171898.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Assessing the progression of wind turbine energy yield losses due to blade erosion by resolving damage geometries from lab tests and field observations
Castorrini, A., Ortolani, A. & Campobasso, M. S., 31/12/2023, In: Renewable Energy. 218, 119256.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
A novel method to improve the performance of PCM thermal energy storage units using a small oscillator plate-numerical analysis
Rahmanian, S., Rahmanian-Koushkaki, H., Moein-Jahromi, M. & Saidur, R., 1/12/2023, In: Journal of Energy Storage. 73, 108900.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Long term study of cell wall saccharification and high added value phenolic acids production from Phalaris aquatica L. energy crop
Pappas, I. A., Papaioannou, E. H. & Koukoura, Z., 31/10/2023, In: Biomass and Bioenergy. 177, 106931.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Development and validation of the in-house hydrodynamics code and the DNV software for TALOS wave energy converter
Sheng, W., Michailides, C., Loukogeorgaki, E. & Aggidis, G., 2/09/2023, p. 1-8. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Necessity and suitability of in-line inspection for corrosion resistant alloy (CRA) clad pipelines
Reda, A., Shanin, M. A., Sultan, I. A., Amaechi, C. V. & McKee, K. K., 2/09/2023, In: Ships and Offshore Structures. 18, 9, p. 1360-1366 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Near-Field Spectroscopy of Individual Asymmetric Split-Ring Terahertz Resonators
Lu, Y., Hale, L. L., Zaman, A. M., Addamane, S. J., Brener, I., Mitrofanov, O. & Degl’Innocenti, R., 31/08/2023, In: ACS Photonics. 10, 8, p. 2832-2838 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical and Experimental Analysis of the Cold Flow Physics of a Non Pre-mixed Industrial Gas Burner
Ortolani, A., Yeadon, J., Ruane, B., Paul, M. & Campobasso, M. S., 31/08/2023, In: Journal of Fluids Engineering. 145, 8, 16 p., 081202.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Radiometric techniques for the detection and assessment of tritium in aqueous media - a review
Parker, A., Aspinall, M., Boxall, C., Cave, F. & Joyce, M., 31/08/2023, In: Progress in Nuclear Energy. 162, 21 p., 104733.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions
Celik, H. K., Gok, S., Caglayan, N. & Rennie, A., 27/08/2023, In: Applied Sciences. 13, 17, 15 p., 9682.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Sensorless Control of Dual Three-Phase IPMSM Based on Frequency Adaptive Linear Extended State Observer
Li, Y., Hu, Y., Ma, X. & Liu, L., 30/11/2023, In: IEEE Transactions on Power Electronics . 38, 11, p. 14492 - 14503 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
The rapid photochemical reduction of U(VI) at high uranium concentrations relevant to spent nuclear fuel recycle processes
Bromley, M. A., Boxall, C., Taylor, R. & Sarsfield, M., 31/10/2023, In: Progress in Nuclear Energy. 164, 104853.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Energy storage technologies: An integrated survey of developments, global economical/environmental effects, optimal scheduling model, and sustainable adaption policies
Amir, M., Deshmukh, R. G., Khalid, H. M., Said, Z., Raza, A., Muyeen, S. M., Nizami, A-S., Elavarasan, R. M., Saidur, R. & Sopian, K., 30/11/2023, In: Journal of Energy Storage. 72, 108694.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Production of conductive composite electrodes for extracellular recording and stimulation
Cheneler, D., Hardy, J. & Rennie, A., 19/08/2023.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Dynamic modeling and vibration analysis of a flexible gear transmission system
Liu, J., Li, X., Pang, R. & Xia, M., 15/08/2023, In: Mechanical Systems and Signal Processing. 197, 21 p., 110367.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Graphene and its tailoring as emerging 2D nanomaterials in efficient CO2 absorption: A state-of-the-art interpretative review
Azni Farhana Mazri, N., Arifutzzaman, A., Kheireddine Aroua, M., Ekhlasur Rahman, M. & Ali Mazari, S., 15/08/2023, In: Alexandria Engineering Journal. 77, p. 479-502 24 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-Stage Conversion of Used Cooking Oil to Biodiesel Using Ion Exchange Resins as Catalysts
Mohammed, M., Abidin, S. Z. & Saha, B., 14/08/2023, In: Catalysts. 13, 8, p. 1-15 15 p., 1209.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling of Amino Acid Fermentations and Stabilization of Anaerobic Digestates by Extracting Ammonium Bicarbonate
Moure Abelenda, A., Aggidis, G. & Aiouache, F., 12/08/2023, In: Fermentation. 9, 8, 750.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Contactless 3D surface characterization of additive manufactured metallic components using terahertz time-domain spectroscopy
Lu, Y., Zhu, H., Zaman, A. M., Rennie, A. E. W., Lin, H., Tian, Y. & Degl’Innocenti, R., 9/08/2023, In: Optical Materials Express. 13, 9, 13 p., 2513.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of the self-modulation instability of a relativistic proton bunch in plasma
Verra, L., Wyler, S., Nechaeva, T., Pucek, J., Bencini, V., Bergamaschi, M., Ranc, L., Zevi Della Porta, G., Gschwendtner, E., Muggli, P., Agnello, R., Ahdida, C. C., Amoedo, C., Andrebe, Y., Apsimon, O., Apsimon, R., Arnesano, J. M., Blanchard, P., Burrows, P. N., Buttenschön, B., & 67 othersCaldwell, A., Chung, M., Cooke, D. A., Davut, C., Demeter, G., Dexter, A. C., Doebert, S., Elverson, F. A., Farmer, J., Fasoli, A., Fonseca, R., Furno, I., Gorn, A., Granados, E., Granetzny, M., Graubner, T., Grulke, O., Guran, E., Henderson, J., Kedves, M. Á., Kim, S-Y., Kraus, F., Krupa, M., Lefevre, T., Liang, L., Liu, S., Lopes, N., Lotov, K., Calderon, M. M., Mazzoni, S., Moon, K., Morales Guzmán, P. I., Moreira, M., Pakuza, C., Pannell, F., Pardons, A., Pepitone, K., Poimendidou, E., Pukhov, A., Ramjiawan, R. L., Rey, S., Rossel, R., Saberi, H., Schmitz, O., Senes, E., Silva, F., Silva, L., Spear, B., Stollberg, C., Sublet, A., Swain, C., Topaloudis, A., Torrado, N., Tuev, P., Turner, M., Velotti, F., Verzilov, V., Vieira, J., Weidl, M., Welsch, C., Wendt, M., Wing, M., Wolfenden, J., Woolley, B., Xia, G., Yarygova, V. & Zepp, M., 8/08/2023, In: Physics of Plasmas. 30, 8, 10 p., 083104.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
The incorporation of xenon at point defects and bubbles in uranium mononitride
Li, J. J., Zagni, N., Neilson, W. D., Gray, R. L. & Murphy, S. T., 1/12/2023, In: Journal of Nuclear Materials. 586, 154656.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Low-dimensional nanomaterials for nanofluids: a review of heat transfer enhancement
Malek, N. A., Masuri, S. U., Saidur, R., Aiza Jaafar, C. N., Supeni, E. E. & Khaliquzzama, M. A., 2/08/2023, (E-pub ahead of print) In: Journal of Thermal Analysis and Calorimetry.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review of anion exchange membranes prepared via Friedel-Crafts reaction for fuel cell and water electrolysis
Feng, Z., Gupta, G. & Mamlouk, M., 1/08/2023, In: International Journal of Hydrogen Energy. 48, 66, p. 25830-25858 29 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
E-pub ahead of print
Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis
Celik, H. K., Akinci, I., Erkan, M. & Rennie, A., 31/07/2023, (E-pub ahead of print) In: Journal of Food Process Engineering. 14 p., e14424.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Repeated impact performance of stainless steel-lightweight high ductility cement composite beams
Huang, Z., Zhao, X., Zhang, W. & Ye, J., 31/07/2023, In: Thin-Walled Structures. 188, 14 p., 110791.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security
Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
E-pub ahead of print
Chemical recycling of polyethylene terephthalate, an industrial and sustainable opportunity for Northwest of England
Lang, W. T., Mehta, S. A., Thomas, M. M., Openshaw, D., Westgate, E. & Bagnato, G., 31/10/2023, In: Journal of Environmental Chemical Engineering. 11, 5, 110585.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Dynamic splitting behavior of ultra-lightweight cement composite with rubber and polyethylene fiber
Huang, Z., Pan, W., Du, S., Zhou, Y. & Ye, J., 5/10/2023, In: Construction and Building Materials. 399, 132577.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Review of Distributed MPPT for Grid-Tied PV Systems at the Sub-Module Level
Alharbi, Y., Darwish, A. & Ma, X., 19/07/2023, In: Energies. 16, 14, p. 5468 23 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Choice and impact of frequency increment in direct digital synthesiser (DDS)‐based linear FMCW radar
Brennan, P. V. & Lok, L. B., 19/07/2023, (E-pub ahead of print) In: IET Radar Sonar and Navigation.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
The development of an axial flux generator, hand crankable up to 200 W.
Anjum, S., 19/07/2023, (Unpublished) Lancaster University. 98 p.
Research output: Thesis › Master's Thesis
Published
Multivariate optimisation of butylene carbonate synthesis via CO2 utilisation
Onyenkeadi, V. N., Aboelazayem, O. & Saha, B., 16/07/2023, p. 1100. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A Review on Modular Converter Topologies Based on WBG Semiconductor Devices in Wind Energy Conversion Systems
Athwer, A. & Darwish, A., 12/07/2023, In: Energies. 16, 14, 5324.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Influence of Fe–N–C morphologies on the oxygen reduction reaction in acidic and alkaline media
Ahmad Junaidi, N. H., Tan, S. Y., Wong, W. Y., Loh, K. S., Saidur, R., Choo, T. F. & Wu, B., 12/07/2023, (E-pub ahead of print) In: Asia-Pacific Journal of Chemical Engineering.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Degradation of QPPO-based anion polymer electrolyte membrane at neutral pH
Feng, Z., Gupta, G. & Mamlouk, M., 5/07/2023, In: RSC Advances. 13, 29, p. 20235-20242 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Poly(2-Hydroxyethyl Methacrylate) Hydrogel-Based Microneedles for Metformin Release
Sharma, M., Kap, Ö., Abdelmohsen, H., Ashton, M., Harper, G., Firlak, M., Aaltonen, J., Bolland, K., Bragg, R., Deeley, S., Francis, E., Kazi, N., Mapley, B., Oikonomou, V., Aljohani, A. D., Cheneler, D., Kılıç, V., Horzum, N. & Hardy, J., 5/07/2023, (E-pub ahead of print) In: Global Challenges. 2300002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding Solid-State Photochemical Energy Storage in Polymers with Azobenzene Side Groups
Wallace, C., Griffiths, K., Dale, B. L., Roberts, S., Parsons, J., Griffin, J. M. & Görtz, V., 5/07/2023, In: ACS applied materials & interfaces. 15, 26, p. 31787-31794 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-scale Modelling for Materials Design in Additive Manufacturing
Wang, W., 4/07/2023, Lancaster University. 268 p.
Research output: Thesis › Doctoral Thesis
Published
Rapid imaging and product screening with low-cost line-field Fourier domain optical coherence tomography
Zhang, Z., Yang, X., Zhao, Z., Zeng, F., Ye, S., Baldock, S., Lin, H., Hardy, J., Zheng, Y. & Shen, Y., 4/07/2023, In: Scientific Reports. 13, 10809.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A dynamic model for the planetary bearings in a double planetary gear set
Liu, J., Li, X. & Xia, M., 1/07/2023, In: Mechanical Systems and Signal Processing. 194, 23 p., 110257.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Investigating the chemical pathway to the formation of a single biofilm using infrared spectroscopy
Crisp, A. R., Short, B., Rowan, L., Ramage, G., Rehman, I. U. R., Short, R. D. & Williams, C., 15/12/2023, In: Biofilm. 6, 7 p., 100141.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ultra-broadband shielding of cellulose nanofiber commingled biocarbon functional constructs: A paradigm shift towards sustainable terahertz absorbers
Pai, A. R., Lu, Y., Joseph, S., Santhosh, N. M., Degl'Innocenti, R., Lin, H., Letizia, R., Paoloni, C. & Thomas, S., 1/07/2023, In: Chemical Engineering Journal. 467, 143213.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study of melting behavior of phase change material with direct fluid contact and container inclination
Khademi, A., Mehrjardi, S. A. A., Said, Z., Saidur, R., Ushak, S. & Chamkha, A. J., 30/06/2023, In: Energy Nexus. 10, 16 p., 100196.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Adaptive Event-Triggered Control for Nonlinear Systems With Asymmetric State Constraints: A Prescribed-Time Approach
Wang, Z., Lam, H-K., Guo, Y., Xiao, B., Li, Y., Su, X., Yeatman, E. & Burdet, E., 30/06/2023, In: IEEE Transactions on Automatic Control. 68, 6, p. 3625-3632 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cross-Domain Augmentation Diagnosis: An Adversarial Domain-Augmented Generalization Method for Fault Diagnosis under Unseen Working Conditions
Li, Q., Chen, L., Kong, L., Wang, D., Xia, M. & Shen, C., 30/06/2023, In: Reliability Engineering and System Safety. 234, 13 p., 109171.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guest Editorial Special Issue on Vacuum Electronic Devices, From Mega to Nano: Beyond One Century of Vacuum Electronics
Paoloni, C., 30/06/2023, In: IEEE Transactions on Electron Devices. 70, 6, p. 2639-2642 4 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Non-Aqueous Solvent Mixtures for CO2 Capture: Choline Hydroxide-Based Deep Eutectic Solvents Absorbent Performance at Various Temperatures and Pressures
Kassim, M. A., Sulaiman, N. A., Yusoff, R. & Aroua, M. K., 30/06/2023, In: Sustainability. 15, 12, 9191.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation of greener alkene epoxidation via response surface methodology for effective separation of epoxides from the reaction mixture
Saha, B. & Bhuiyan, M. M. R., 28/06/2023, p. 8. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
E-pub ahead of print
Oxide-supported metal catalysts for anaerobic NAD⁺ regeneration with concurrent hydrogen production
Li, J., Burnett, J., Martinez Macias, C., Howe, R. F. & Wang, X., 28/06/2023, (E-pub ahead of print) In: Chinese Chemical Letters. 5 p., 108737.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fabrication of G-band Double Corrugated Waveguide by Precision Cutting
Paoloni, C., Socuellamos, J., Basu, R., Narasimhan, P. & Letizia, R., 27/06/2023, 2023 24th International Vacuum Electronics Conference (IVEC). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An Agreement Analysis on the Perception of Property Stakeholders for the Acceptability of Smart Buildings in the Nigerian Built Environment
Alohan, E. O., Oyetunji, A. K., Amaechi, C. V., Dike, E. C. & Chima, P., 26/06/2023, In: Buildings. 13, 7, 1620.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022
Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Maximum Wireless Power Transmission Using Real-Time Single Iteration Adaptive Impedance Matching
Nasr Esfahani, F., Madani, S. M., Niroomand, M. & Safaee, A., 16/06/2023, (E-pub ahead of print) In: IEEE transactions on circuits and systems I: Regular papers. 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Aspen Plus® simulation of a combined process for the production of ammonium carbonate and a slow release fertilizer by ash-based treatment of the anaerobic digestate
Moure Abelenda, A., 15/06/2023.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Hybrid cement composite-based sensor for in-situ chloride monitoring in concrete structures
Huang, B., Wang, J., Piukovics, G., Zabihi, N., Ye, J., Saafi, M. & Ye, J., 15/06/2023, In: Sensors and Actuators B: Chemical. 385, 10 p., 133638.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flash distillation for NH4HCO3-stabilization of anaerobic digestate
Moure Abelenda, A. & Aiouache, F., 13/06/2023.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Creating 3D objects with integrated electronics via multiphoton fabrication in vitro and in vivo
Baldock, S., Kevin, P., Harper, G., Griffin, R., Genedy, H., Fong, J., Zhao, Z., Zhang, Z., Shen, Y., Lin, H., Au, C., Martin, J., Ashton, M., Haskew, M., Stewart, B., Efremova, O., Esfahani, R., Emsley, H., Appleby, J., Cheneler, D., & 3 othersCummings, D. M., Benedetto, A. & Hardy, J., 9/06/2023, In: Advanced Materials Technologies. 8, 11, 13 p., 2201274.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and Fabrication of E-band Traveling Wave Tube for High Data Rate Wireless Links
Paoloni, C., Basu, R., Narasimhan, P., Gates, J. & Letizia, R., 1/06/2023, In: IEEE Transactions on Electron Devices. 70, 6, p. 2773-2779 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Half-Height Pin Gap Waveguide-Based Slow-Wave Structure for Millimeter Wave Traveling-Wave Tubes
Zied Abozied, A., Gates, J. & Letizia, R., 1/06/2023, In: IEEE Transactions on Electron Devices. 70, 6, p. 3295-3301 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved charge transfer through the minimal addition of Pb as a sintering aid to TiO2-based low-temperature dye sensitised solar cell
Khir, H., Pandey, A. K., Saidur, R., Ahmad, M. S., Rahim, N. A., Dewika, M. & Samykano, M., 1/06/2023, In: Ceramics International. 49, 11 Part A, p. 17620-17628 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Variant-Depth Neural Networks for Deblurring Traffic Images in Intelligent Transportation Systems
Wang, Q., Guo, C., Dai, H-N. & Xia, M., 1/06/2023, In: IEEE Transactions on Intelligent Transportation Systems. 24, 6, p. 5792-5802 11 p., 6.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A systematic review of machine learning approaches in carbon capture applications
Hussin, F., Md Rahim, S. A. N., Hatta, N. S. M., Aroua, M. K. & Mazari, S. A., 31/05/2023, In: Journal of CO2 Utilization. 71, 16 p., 102474.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Adapted business model canvas template and primary market research for project-based learning on management of slurry
Moure Abelenda, A., Aiouache, F. & Moreno-Mediavilla, D., 31/05/2023, In: Environmental Technology and Innovation. 30, 16 p., 103106.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electrodeposition of nickel–iron on stainless steel as an efficient electrocatalyst coating for the oxygen evolution reaction in alkaline conditions
Wang, Y., Williamson, N., Dawson, R. & Bimbo, N., 31/05/2023, In: Journal of Applied Electrochemistry. 53, 5, p. 877-892 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fabrication, mechanical properties, and multifunctionalities of particle reinforced foams: A review
Cao, S., Ma, N., Zhang, Y., Bo, R. & Lu, Y., 31/05/2023, In: Thin-Walled Structures. 186, 22 p., 110678.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Graphene oxide nano-layers functionalized/reduced by L-Citrulline/Pectin bio-molecules for epoxy nanocomposite coating mechanical properties reinforcement
Shahmoradi, A. R., Bejandi, M. S., Rasanani, E. H., Javidparvar, A. A. & Ramezanzadeh, B., 31/05/2023, In: Progress in Organic Coatings. 178
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
POSS@TiCl₄ nanoparticles: A minimalism styled Ziegler-Natta catalytic system
Li, W., Dong, C., Wang, X., Wang, J. & Yang, Y., 31/05/2023, In: Journal of Catalysis. 421, p. 384-392 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Probabilistic analysis of wind turbine performance degradation due to blade erosion accounting for uncertainty of damage geometry
Campobasso, S., Castorrini, A., Ortolani, A. & Minisci, E., 31/05/2023, In: Renewable and Sustainable Energy Reviews. 178, 16 p., 113254.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Vision-based particle filtering for quad-copter attitude estimation using multirate delayed measurements
Sadeghzadeh-Nokhodberiz, N., Iranshahi, M. & Montazeri, A., 30/05/2023, In: Frontiers in Robotics and AI. 10, 1090174.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent Advances in Metal Powder-Based Additive Manufacturing
Wu, H., Ren, Y., Tian, Y. & Caballero, A. O., 26/05/2023, In: Materials. 16, 11, 3975.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Novel Feature-Based Manufacturability Assessment System for Evaluating Selective Laser Melting and Subtractive Manufacturing Injection Moulding Tool Inserts
Kashouty, M. F. E., Rennie, A. & Ghazy, M., 22/05/2023, In: Designs. 7, 3, 18 p., 68.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Joining Technologies for Aluminium Castings—A Review
Li, D., Slater, C., Cai, H., Hou, X., Li, Y. & Wang, Q., 19/05/2023, In: Coatings. 13, 5, 958.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Tidal range power generation: case studies combining the Lancaster 0-D generation and cost models
Vandercruyssen, D., Baker, S., Howard, D. & Aggidis, G., 16/05/2023, (E-pub ahead of print) In: Proceedings of the ICE - Energy. p. 1-25 25 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and numerical analysis of additively manufactured foamed sandwich beams
Yousefi Kanani, A. & Kennedy, A., 15/05/2023, In: Composite Structures. 312, 9 p., 116866.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
MXene/MnO2 nanocomposite coated superior salt-rejecting biodegradable luffa sponge for efficient solar steam generation
Saleque, A. M., Ma, S., Thakur, A. K., Saidur, R., Han, T. K., Hossain, M. I., Qarony, W., Ma, Y., Sathyamurthy, R. & Tsang, Y. H., 15/05/2023, In: Desalination. 554, 10 p., 116488.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Evolution of Vanadium Redox Flow Battery in Electrode
Hossain, M. H., Abdullah, N., Tan, K. H., Saidur, R., Mohd Radzi, M. A. & Shafie, S., 5/05/2023, (E-pub ahead of print) In: The Chemical Record.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advancing cervical cancer diagnosis and screening with spectroscopy and machine learning
Meza Ramirez, C. A., Greenop, M., Almoshawah, Y. A., Martin Hirsch, P. L. & Rehman, I. U., 4/05/2023, In: Expert Review of Molecular Diagnostics. 23, 5, p. 375-390 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Learning to Assist Bimanual Teleoperation using Interval Type-2 Polynomial Fuzzy Inference
Wang, Z., Fei, H., Huang, Y., Rouxel, Q., Xiao, B., Li, Z. & Burdet, E., 3/05/2023, (E-pub ahead of print) In: IEEE Transactions on Cognitive and Developmental Systems. p. 1-1 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel micromechanical method for nonlinear analysis of magnetostrictive composites
Li, Z., Wang, Y., Liu, L., Shi, Y., Li, Y. & Ye, J., 1/05/2023, In: Composite Structures. 311, 16 p., 116633.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Destilación (II): Destilación flash
Moure Abelenda, A. & Feijoo Costa, G. (ed.), 1/05/2023, Destilación (II): Destilación flash. Feijoo, G. & Moure Abelenda, A. (eds.). Madrid: Notas de Enxeñaría Química, Vol. 11. p. 26 - 34
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Microfactory Design for Valorization of E-Waste Plastics (Acrylonitrile-Butadiene-Styrene, Polycarbonate, and Polypropylene) on Additive Manufacturing Sector
Moure Abelenda, A. & Aiouache, F., 1/05/2023, In: Recycling. 8, 3, 46.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multistage laser shock improves surface structural properties of aluminum alloy
Zhang, X., Xia, M., Zhang, C. & Hu, Y., 1/05/2023, In: International Journal of Mechanical Sciences. 245, 108101.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model
Wang, X., Yousefi Kanani, A., Gu, Z., Yang, J., Ye, J. & Hou, X., 30/04/2023, In: Theoretical and Applied Fracture Mechanics. 124, 15 p., 103760.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wire-feed laser additive manufacturing of dissimilar metals via dual molten pool interface interlocking mechanism
He, Y., Zhang, X. H., Zhao, Z., Xu, S. H., Xia, M., Zhang, C. & Hu, Y. W., 30/04/2023, In: Science China Technological Sciences. 66, 4, p. 976-986 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Terahertz metasurface platform for modulation, holography, and encryption
Degl’Innocenti, R., 26/04/2023, In: Advanced Photonics. 5, 02, 1 p., 020503.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...58 Next

Research

School of Engineering

Quick Links

Connect With Us