Home > Research > Structures, Materials and Manufacturing > Publications & Outputs

Research

View graph of relations

Structures, Materials and Manufacturing

1 - 100 out of 964Page size: 100
RSS feed of this list
  1. 2023
  2. Published

    Structural Strength Analysis of a Rotary Drum Mower in Transportation Position

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Dynamic splitting behavior of ultra-lightweight cement composite with rubber and polyethylene fiber

    Huang, Z., Pan, W., Du, S., Zhou, Y. & Ye, J., 5/10/2023, In: Construction and Building Materials. 399, 132577.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Effects of defects on the transverse mechanical response of unidirectional fibre-reinforced polymers: DEM simulation and deep learning prediction

    Ding, X., Gu, Z., Hou, X., Xia, M., Ismail, Y. & Ye, J., 1/10/2023, In: Composite Structures. 321, 117301.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Case study for effects of pile installation on existing offshore facilities in brownfields

    Reda, A., Amaechi, C. V. & Shahin, M. A., 30/09/2023, In: Applied Ocean Research. 138, 103651.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    State-of-the-art review of composite marine risers for floating and fixed platforms in deep seas

    Amaechi, C. V., Reda, A., Shahin, M. A., Sultan, I. A., Beddu, S. B. & Ja'e, I. A., 30/09/2023, In: Applied Ocean Research. 138, 18 p., 103624.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Necessity and suitability of in-line inspection for corrosion resistant alloy (CRA) clad pipelines

    Reda, A., Shanin, M. A., Sultan, I. A., Amaechi, C. V. & McKee, K. K., 2/09/2023, In: Ships and Offshore Structures. 18, 9, p. 1360-1366 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions

    Celik, H. K., Gok, S., Caglayan, N. & Rennie, A., 27/08/2023, In: Applied Sciences. 13, 17, 15 p., 9682.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis

    Celik, H. K., Akinci, I., Erkan, M. & Rennie, A., 31/07/2023, In: Journal of Food Process Engineering. 46, 11, 14 p., e14424.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Repeated impact performance of stainless steel-lightweight high ductility cement composite beams

    Huang, Z., Zhao, X., Zhang, W. & Ye, J., 31/07/2023, In: Thin-Walled Structures. 188, 14 p., 110791.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Shoreline Delineation from Synthetic Aperture Radar (SAR) Imagery for High and Low Tidal States in Data-Deficient Niger Delta Region

    Dike, E. C., Oyetunji, A. K., Amaechi, C. V. & Pattiaratchi, C. (ed.), 31/07/2023, In: Journal of Marine Science and Engineering (JMSE). 11, 8, 1528.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security

    Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

  13. Published

    An Agreement Analysis on the Perception of Property Stakeholders for the Acceptability of Smart Buildings in the Nigerian Built Environment

    Alohan, E. O., Oyetunji, A. K., Amaechi, C. V., Dike, E. C. & Chima, P., 26/06/2023, In: Buildings. 13, 7, 1620.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022

    Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Hybrid cement composite-based sensor for in-situ chloride monitoring in concrete structures

    Huang, B., Wang, J., Piukovics, G., Zabihi, N., Ye, J., Saafi, M. & Ye, J., 15/06/2023, In: Sensors and Actuators B: Chemical. 385, 10 p., 133638.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Determining Residential Location Choice along the Coastline in Victoria Island, Nigeria Using a Factor Analytical Approach

    Ayoola, A. B., Oyetunji, A. K., Amaechi, C. V., Olukolajo, M. A., Ullah, S., Kemiki, O. A. & Lee, C. L. (ed.), 12/06/2023, In: Buildings. 13, 6, 1513.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    A Novel Feature-Based Manufacturability Assessment System for Evaluating Selective Laser Melting and Subtractive Manufacturing Injection Moulding Tool Inserts

    Kashouty, M. F. E., Rennie, A. & Ghazy, M., 22/05/2023, In: Designs. 7, 3, 18 p., 68.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    A novel micromechanical method for nonlinear analysis of magnetostrictive composites

    Li, Z., Wang, Y., Liu, L., Shi, Y., Li, Y. & Ye, J., 1/05/2023, In: Composite Structures. 311, 16 p., 116633.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Compressive performance and deterioration mechanism of ultra-high performance concrete with coarse aggregates under and after heating

    Xue, C., Yu, M., Xu, H., Xu, L., Mohamed, S. & Ye, J., 1/04/2023, In: Journal of Building Engineering. 64, 20 p., 105502.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Graduate Attributes and Generic Skills in Remote Teaching

    Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 3/03/2023, Scholarly Community Encyclopdeia: Education, Scientific Disciplines. Basel, Switzerland: MDPI AG, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary

  21. Published

    Optimisation of active SHM system based on optimal number and placement of piezoelectric transducers

    Daraji, A. H., Ye, J. & Hale, J. M., 1/03/2023, In: Journal of Intelligent Material Systems and Structures. 34, 4, p. 425-439 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Online and Hybrid Teaching Effects on Graduate Attributes: Opportunity or Cause for Concern?

    Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 20/02/2023, In: Education Sciences. 13, 2, 15 p., 221.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Potential of New Sustainable Green Geopolymer Metal Composite (GGMC) Material as Mould Insert for Rapid Tooling (RT) in Injection Moulding Process

    Yin, A. T. M., Rahim, S. Z. B. A., Abdullah, M. M. A. B., Nabiałek, M., Abdellah, A. E., Rennie, A., Tahir, M. F. M. & Titu, A. M., 19/02/2023, In: Materials. 16, 4, 38 p., 1724.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method

    Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    A genetic evolved machine learning approach for 3D DEM modelling of anisotropic materials with full consideration of particulate interactions

    Gu, Z., Ding, X., Hou, X. & Ye, J., 1/02/2023, In: Composites Part B: Engineering. 250, 11 p., 110432.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness

    Wang, X., Pang, K., Huang, X., Yang, J., Ye, J. & Hou, X., 31/01/2023, In: Engineering Fracture Mechanics. 277, 19 p., 108954 .

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Additively manufactured foamed polylactic acid for lightweight structures

    Yousefi Kanani, A., Rennie, A. & Rahim, S. Z. B. A., 2/01/2023, In: Rapid Prototyping Journal. 29, 1, p. 50-66 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Meso-scale computational modeling of the fracture of concrete with complex shaped aggregates under the self-restraint stress

    Qiu, W., Ueda, T., Fu, S., Han, Y., Wang, J. & Ye, J., 1/01/2023, In: Composite Structures. 303, 21 p., 116267.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. 2022
  30. Published

    A literature review on the technologies of bonded hoses for marine applications

    Amaechi, C. V., Wang, F., Ja'e, I. A., Aboshio, A., Odijie, A. C. & Ye, J., 31/12/2022, In: Ships and Offshore Structures. 17, 12, p. 2819-2850 32 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  31. Published

    Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel

    Zhu, H., Rennie, A., Li, R. & Tian, Y., 31/12/2022, In: Surfaces and Interfaces. 35, 12 p., 102442.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Review on Subsea Pipeline Integrity Management: An Operator’s Perspective

    Amaechi, C. V., Hosie, G., Reda, A. & Correia, J. A. (ed.), 21/12/2022, In: Energies. 16, 1, 98.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  33. Published

    Predictions of macroscopic mechanical properties and microscopic cracks of unidirectional fibre-reinforced polymer composites using deep neural network (DNN)

    Ding, X., Hou, X., Xia, M., Ismail, Y. & Ye, J., 15/12/2022, In: Composite Structures. 302, 13 p., 116248.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives

    Wang, X-E., Kanani, A. Y., Pang, K., Yang, J., Ye, J. & Hou, X., 30/11/2022, In: Thin-Walled Structures. 180, 18 p., 109985.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Optimization of mooring line design parameters using Mooring Optimization Tool for FPSO (MooOpT4FPSO) with the consideration of integrated design methodology

    Ja'e, I. A., Ahmed Ali, M. O., Yenduri, A., Amaechi, C. V., Nizamani, Z. & Nakayama, A., 15/11/2022, In: Ocean Engineering. 264, 15 p., 112499.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Irregular Shape Effect of Brass and Copper Filler on the Properties of Metal Epoxy Composite (MEC) for Rapid Tooling Application

    Hussin, R., Sharif, S., Rahim, S. Z. B. A., Rennie, A., Suhaimi, M. A., Abdellah, A. E., Shuaib, N. A., Khushairi, M. T. M. & Titu, A. M., 2/11/2022, In: Journal of Manufacturing and Materials Processing. 6, 6, 22 p., 134.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Understanding the fluid-structure interaction from wave diffraction forces on CALM buoys: Numerical and analytical solutions

    Amaechi, C. V., Wang, F. & Ye, J., 2/11/2022, In: Ships and Offshore Structures. 17, 11, p. 2545-2573 29 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    An ABAQUS® plug-in for generating virtual data required for inverse analysis of unidirectional composites using artificial neural networks

    Ismail, Y., Wan, L., Chen, J., Ye, J. & Yang, D., 31/10/2022, In: Engineering with Computers. 38, 5, p. 4323-4335 13 p., 5.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming

    Wang, X-E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J. & Hou, X., 31/10/2022, In: International Journal of Adhesion and Adhesives. 118, 12 p., 103230.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Guidelines on Designing Marine Hoses for Oil/Gas Applications

    Amaechi, C. V., 28/10/2022.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  41. Published

    Scientometric Review and Thematic Areas for the Research Trends on Marine Hoses

    Amaechi, C. V., Ja'e, I. A., Reda, A. & Ju, X., 19/10/2022, In: Energies. 15, 20, 31 p., 7723.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Systematic Review and Annotated Bibliography on Teaching in Higher Education Academies (HEAs) via Group Learning to Adapt with COVID-19

    Amaechi, C. V., Amaechi, E. C., Onumonu, U. P. & Kgosiemang, I. M., 12/10/2022, In: Education Sciences. 12, 10, 44 p., 699.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Impact Response of Double-Layer Steel-RULCC-Steel Sandwich Panels: Experimental, Numerical, and Analytical Approaches

    Zhang, W., Huang, Z., Li, R., Zhao, X. & Ye, J., 1/10/2022, In: Journal of Structural Engineering. 148, 10, 04022165.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling

    Musa, L., Kumar, N. K., Rahim, S. Z. B. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Yousefi Kanani, A. & Azmi, A. A., 30/09/2022, In: Journal of Materials Research and Technology. 20, p. 2841-2858 18 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  45. Published

    Multi-impact performance of prestressed CFRP-strengthened RC beams using H-typed end anchors

    Huang, Z., Deng, W., Li, R., Chen, J., Sui, L., Zhou, Y., Zhao, D., Yang, L. & Ye, J., 30/09/2022, In: Marine Structures. 85, 30 p., 103264.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Novel Design, Hydrodynamics and Mechanics of Marine Hoses in Oil/Gas Applications

    Amaechi, C. V., 30/09/2022, Lancaster University.

    Research output: Thesis › Doctoral Thesis

  47. Published

    Guidelines on Asset Management of Offshore Facilities for Monitoring, Sustainable Maintenance, and Safety Practices

    Amaechi, C. V., Reda, A., Kgosiemang, I. M., Ja'e, I. A., Oyetunji, A. K., Olukolajo, M. A. & Igwe, I. B., 25/09/2022, In: Sensors. 22, 19, 57 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    Scientific Review and Annotated Bibliography of Teaching in Higher Education Academies on Online Learning: Adapting to the COVID-19 Pandemic

    Amaechi, C. V., Amaechi, E. C., Oyetunji, A. K. & Kgosiemang, I. M., 22/09/2022, In: Sustainability. 14, 19, 25 p., 12006.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    How to fix a tibial tubercle osteotomy with distalisation: A finite element analysis

    Guneri, B., Kose, O., Celik, H. K., Cakar, A., Tasatan, E. & Rennie, A., 31/08/2022, In: Knee. 37, p. 132-142 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Review on Fixed and Floating Offshore Structures. Part I: Types of Platforms with Some Applications

    Amaechi, C. V., Reda, A., Butler, H. O., Ja'e, I. A. & An, C., 5/08/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 8, 56 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Scientometric Review for Research Patterns on Additive Manufacturing of Lattice Structures

    Amaechi, C. V., Adefuye, E. F., Kgosiemang, I. M., Huang, B. & Amaechi, E. C., 2/08/2022, In: Materials. 15, 15, 34 p., e5323.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Experimental and numerical study on tensile properties of bolted GFRP joints at high and low temperatures

    Xue, C., Yu, M., Yang, B., Wang, T., Saafi, M. & Ye, J., 1/08/2022, In: Composite Structures. 293, 15 p., 115743.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Effects of fibroblast on electromechanical dynamics of human atrial tissue—insights from a 2D discrete element model

    Brocklehurst, P., Zhang, H. & Ye, J., 26/07/2022, In: Frontiers in Physiology. 13, 17 p., 938497.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  54. Published

    Review on Fixed and Floating Offshore Structures. Part II: Sustainable Design Approaches and Project Management

    Amaechi, C. V., Reda, A., Butler, H. O., Ja’e, I. A. & An, C., 15/07/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 7, p. e973 973.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  55. Published

    Guidelines on Composite Flexible Risers: Monitoring Techniques and Design Approaches

    Amaechi, C. V., Reda, A., Ja'e, I. A., Wang, C. & An, C., 7/07/2022, In: Energies. 15, 14, 45 p., 4982.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    A Novel Self‐Updating Design Method for Complex 3D Structures Using Combined Convolutional Neuron and Deep Convolutional Generative Adversarial Networks

    Gu, Z., Hou, X., Saafi, M. & Ye, J., 30/06/2022, In: Advanced Intelligent Systems. 4, 6, 10 p., 2100186.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  57. Published

    Effect of Coronal Fracture Angle on the Stability of Screw Fixation in Medial Malleolar Fractures: A Finite Element Analysis

    Emre, T. Y., Celik, H. K., Arik, H. O., Rennie, A. & Kose, O., 1/06/2022, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 236, 6, p. 825-840 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  58. Published

    Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review

    Huzaim, N. H. M., Rahim, S., Musa, L., Abdellah, A. E., Abdullah, M. M. A. B., Rennie, A., Rahman, R., Garus, S., Błoch, K., Sandu, A. V., Vizureanu, P. & Nabiałek, M., 23/05/2022, In: Materials. 15, 10, 39 p., 3725.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  59. Published

    Multicriteria Decision-Making Methods in Selecting Seismic Upgrading Strategy of High-Rise RC Wall Buildings

    Es-Haghi, M. S., Barkhordari, M. S., Huang, Z. & Ye, J., 30/04/2022, In: Journal of Structural Engineering. 148, 4, 04022015.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    Local tailored design of deep water composite risers subjected to burst, collapse and tension loads

    Amaechi, C. V., 15/04/2022, In: Ocean Engineering. 250, 28 p., 110196.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  61. Published

    Numerical investigation on mooring line configurations of a Paired Column Semisubmersible for its global performance in deep water condition

    Amaechi, C. V., Odijie, A. C., Wang, F. & Ye, J., 15/04/2022, In: Ocean Engineering. 250, 27 p., 110572.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Numerical-based analytical model of double-layer steel-LHDCC sandwich composites under punching loads

    Zhang, W., Huang, Z., Ye, J. & Youtam, 15/04/2022, In: Composite Structures. 286, 21 p., 115271.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Adaptive stochastic morphology simulation and mesh generation of high-quality 3D particulate composite microstructures with complex surface texture

    Huang, J., Deng, F., Liu, L. & Ye, J., 1/04/2022, In: Computer Methods in Applied Mechanics and Engineering. 393, 45 p., 114811.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Manufacturing of engineered novel additive manufactured polymer material from phase-field

    Adefuye, E., Hou, X. & Ye, J., 1/04/2022.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  65. Published

    A literature review on the linear elastic material properties assigned in finite element analyses in dental research

    Celik, H. K., Koc, S., Kustarci, A. & Rennie, A., 31/03/2022, In: MATERIALS TODAY COMMUNICATIONS. 30, 10 p., 103087.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending

    Amaechi, C. V., Adefuye, E., Oyetunji, A. K., Ja'e, I. A., Adelusi, I., Odijie, A. C. & Wang, F., 31/03/2022, In: Inventions — Open Access Journal. 7, 1, 9.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  67. Published

    Phase dissolution and improving properties of completely decomposed granite through alkali fusion method

    Dassekpo, J-BM., Miao, L., Bai, J., Gong, Q., Shao, N. N., Dong, Z., Xing, F. & Ye, J., 31/03/2022, In: Cement and Concrete Composites. 127, 11 p., 104407.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  68. Published

    Review of Composite Marine Risers for Deep-Water Applications: Design, Development and Mechanics

    Amaechi, C. V., Chesterton, C., Butler, H. O., Gillet, N., Wang, C., Ja’e, I. A., Reda, A. & Odijie, A. C., 17/03/2022, In: Journal of Composites Science. 6, 3, 50 p., e96.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  69. Published

    Meso-scale modelling of the thermo-mechanical response for concrete with complex-shaped aggregates in early age

    Qiu, W., Fu, S., Zhu, J. & Ye, J., 14/03/2022, In: Construction and Building Materials. 323, 17 p., 126485.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    Numerical Investigation of Winglet Aerodynamics and Dimple Effect of NACA 0017 Airfoil for a Freight Aircraft

    Lewthwaite, M. T. & Amaechi, C. V., 7/03/2022, In: Inventions — Open Access Journal. 7, 1, 30 p., 31.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    Numerical Modelling on the Local Design of a Marine Bonded Composite Hose (MBCH) and Its Helix Reinforcement

    Amaechi, C. V., Chesterton, C., Butler, H. O., Gu, Z. & Odijie, A. C., 3/03/2022, In: Journal of Composites Science. 6, 3, 28 p., e79.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Evolution of ITZ and its effect on the carbonation depth of concrete under supercritical CO2 condition

    Bao, H., Xu, G., Yu, M., Wang, Q., Li, R., Saafi, M. & Ye, J., 28/02/2022, In: Cement and Concrete Composites. 126, 16 p., 104336.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    A new two-step modeling strategy for random micro-fiber reinforced composites with consideration of primary pores

    Cai, H., Ye, J., Shi, J., Wang, Y., Shi, Y., Huang, B., Xu, Y., Saafi, M. & Ye, J., 8/02/2022, In: Composites Science and Technology. 218, 19 p., 109122.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    An Investigation on the Vortex Effect of a CALM Buoy under Water Waves Using Computational Fluid Dynamics (CFD)

    Amaechi, C. V. & Ye, J., 4/02/2022, In: Inventions — Open Access Journal. 7, 1, 29 p., 23.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  75. Published

    Experimental study on motion characterization of CALM buoy hose system under water waves

    Amaechi, C. V., Wang, F. & Ye, J., 2/02/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 2, 204.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    Management of Biohazards and Pandemics: COVID-19 and Its Implications in the Construction Sector

    Amaechi, C. V., Amaechi, E. C., Amechi, S. C., Oyetunji, A. K., Kgosiemang, I. M., Mgbeoji, O. J., Ojo, A. S., Moure Abelenda, A., Milad, M., Adelusi, I. & Coker, A. O., 28/01/2022, In: Computational Water, Energy, and Environmental Engineering. 11, 1, p. 34-63 30 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    Finite element modelling on the mechanical behaviour of Marine Bonded Composite Hose (MBCH) under burst and collapse

    Amaechi, C. V., Chesterton, C., Butler, H. O., Gu, Z., Odijie, A. C., Wang, F., Hou, X. & Ye, J., 24/01/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 24 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Investigation on hydrodynamic characteristics, wave-current interaction, and sensitivity analysis of submarine hoses attached to a CALM buoy

    Amaechi, C. V., Wang, F. & Ye, J., 17/01/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 1, 48 p., 120.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Numerical studies on CALM buoy motion responses and the effect of buoy geometry cum skirt dimensions with its hydrodynamic waves-current interactions

    Amaechi, C. V., Wang, F. & Ye, J., 15/01/2022, In: Ocean Engineering. 244, 28 p., 110378.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  80. Published

    Experimental study on thermal performance of ultra-high performance concrete with coarse aggregates at high temperature

    Xue, C., Yu, M., Xu, H., Xu, L., Saafi, M. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, Part A, 12 p., 125585.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions

    Yang, J., Wang, Y., Wang, X. E., Hou, X., Zhao, C. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, B, 13 p., 125595.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    Microscale damage evolutions in fiber-reinforced composites with different initial defects

    Ye, J., Hong, Y., Liu, L., Cai, H., He, W., Huang, B., Saafi, M., Wang, Y. & Ye, J., 1/01/2022, In: Composite Structures. 279, 14 p., 114856.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  83. 2021
  84. Published

    Mass optimisation of 3D-printed specimens using multivariable regression analysis

    Doicin, C-V., Ulmeanu, M-E., Rennie, A. & Lupeanu, E., 31/12/2021, In: International Journal of Rapid Manufacturing. 10, 1, p. 1-22 22 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  85. Published

    Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

    Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Ultra-lightweight high ductility cement composite incorporated with low PE fiber and rubber powder

    Huang, Z., Liang, T., Huang, B., Zhou, Y. & Ye, J., 20/12/2021, In: Construction and Building Materials. 312, 12 p., 125430.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    Review on the design and mechanics of bonded marine hoses for Catenary Anchor Leg Mooring (CALM) buoys

    Amaechi, C. V., Chesterton, C., Butler, H. O., Wang, F. & Ye, J., 15/12/2021, In: Ocean Engineering. 242, 32 p., 110062.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    Selective Laser Melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry

    El Kashouty, M., Rennie, A., Ghazy, M. & El Aziz, A. A., 1/12/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 23, 12 p., 989382.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Axial-Load Resistance of a Novel UHPFRC Grouted SHS Tube-Sleeve Connection: Experimental, Numerical, and Theoretical Approaches

    Huang, Z., Zhang, W., Fan, S., Sui, L. & Ye, J., 30/11/2021, In: Journal of Structural Engineering. 147, 11

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Advanced static and dynamic analysis method for helical springs of non-linear geometries

    Gu, Z., Hou, X. & Ye, J., 24/11/2021, In: Journal of Sound and Vibration. 513, 18 p., 116414.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  91. Published

    An Overview on Bonded Marine Hoses for Sustainable Fluid Transfer and (Un)Loading Operations via Floating Offshore Structures (FOS)

    Amaechi, C. V., Chesterton, C., Butler, H. O., Wang, F. & Ye, J., 8/11/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 11

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  92. Published

    Design and analysis method of nonlinear helical springs using a combining technique: Finite element analysis, constrained Latin hypercube sampling and genetic programming

    Gu, Z., Hou, X. & Ye, J., 1/11/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 22, p. 5917-5930 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    Mathematical Modelling of Bonded Marine Hoses for Single Point Mooring (SPM) Systems, with Catenary Anchor Leg Mooring (CALM) Buoy Application: A Review

    Amaechi, C. V., Wang, F. & Ye, J., 26/10/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 11, 61 p., 1179.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    Numerical Assessment on the Dynamic Behaviour of Submarine Hoses Attached to CALM Buoy Configured as Lazy-S under Water Waves

    Amaechi, C. V., Wang, F. & Ye, J., 15/10/2021, In: Journal of Marine Science and Engineering (JMSE). 9, 10, 48 p., 1130.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    A review on graft compatibilizer for thermoplastic elastomer blend

    Kumar, N. K., Musa, L., Rasidi, M. S. M., Rahim, S. Z. A., Rahman, R., Azmi, A. A. & Rennie, A., 12/10/2021, In: Journal of Physics: Conference Series. 2080, 8 p., 012003.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    Effects of Bruising of ‘Pink Lady’ Apple Under Impact Loading in Drop Test on Firmness, Colour and Gas Exchange of Fruit During Long Term Storage

    Celik, H. K., Ustun, H., Erkan, M., Rennie, A. & Akinci, I., 30/09/2021, In: Postharvest Biology and Technology. 179, 13 p., 111561.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  97. Published

    Hybrid and adhesively bonded joints with dissimilar adherends: a critical review

    Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  98. Published

    2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization

    Chi, Y., Huang, B., Saafi, M., Fullwood, N., Lambert, C., Whale, E., Hepworth, D. & Ye, J., 13/09/2021, In: Construction and Building Materials. 299, 23 p., 123867.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  99. Published

    Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

    Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Study regarding the influence of material type on economic objectives in MEx fabrication

    Ulmeanu, M-E., Doicin, C-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.

    Research output: Contribution to Journal/Magazine › Conference article › peer-review

  101. Published

    Micromechanical analysis of UD CFRP composite lamina under multiaxial loading with different loading paths

    Chen, J., Wan, L., Ismail, Y., Hou, P., Ye, J. & Yang, D., 1/08/2021, In: Composite Structures. 269, 13 p., 114024.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  102. Published

    Reliability-based design assessment of offshore inflatable barrier structures made of fibre-reinforced composites

    Aboshio, A., Uche, A. O., Akagwu, P. & Ye, J., 1/08/2021, In: Ocean Engineering. 233, 10 p., 109016.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  103. E-pub ahead of print

    Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies: a Finite Element Analysis

    Levent, A., Yapti, M., Celik, H. K., Kose, O., Kılıçaslan, Ö. F. & Rennie, A., 23/07/2021, (E-pub ahead of print) In: The Journal of Foot and Ankle Surgery. YJFAS 53575.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Back to top