Structures, Materials and Manufacturing

View graph of relations

1 - 100 out of 967Page size: 100

10
25
50
100
500
All

RSS feed of this list

Sort by: Type

Chapter (peer-reviewed)
Published
Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security
Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles
Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Monitoring degradation in the field
Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications
Lupeanu, M., Rosu, M-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Opportunities offered by additive manufacturing in creative businesses: informing designers
Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Use of FDM in an undergraduate student project: design, build and test a model wind turbine
Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Templates for consumer use in designing customised products
Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products
Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The application of rapid manufacturing technologies in the spare parts industry
Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications
Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Virtual Trading System for Rapid Manufactured Products
Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Design templates for consumer use in customising additive layer manufactured products
Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach
Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent
Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts
Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models
Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Surface Flatness Measurement in Stereolithography
Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
A system for the generation of liquid metal droplets using electromotive forces
Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools
Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping using electrodeposition of copper
Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Analytical solutions of composite plate and shell structures and their engineering applications
Ye, J., 1996, Advances in Applied Mechanics Research in the UK. Beijing: Science Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings.
Soldatos, K. P. & Ye, J., 1995, Homogeneity and Nonlinearity in Solid Mechanics . Parker, D. F. & England, A. H. (eds.). Kluwer Academic Publishers, (Solid Mechanics and Its Applications; vol. 39).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Chapter
Published
Powder Characterization – Methods, Standards and State of the Art
Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors, Volume 50: Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography
Aiouache, F., 17/11/2017, Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors. Dixon, A. & Deutschmann, O. (eds.). Academic Press, p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms
Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Laser direct metal deposition: theory and applications in manufacturing and maintenance
Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates.
Ye, J., 2009, Advances in Engineering Mechanics. Qin, Q. & Sun, B. (eds.). Nova Science Publishers, Vol. 1. p. 127-165 39 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Imaging internal structure with electromagnetic induction tomography.
Ma, X., Peyton, A. J., Soleimani, M. & Lionheart, W. R. B., 12/03/2007, Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE. IEEE, p. 299 -303
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Eddy current measurement of the electrical conductivity and porosity of metal foams.
Ma, X. & Peyton, A. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 127-132 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Novel computer-based processing system for partial discharge detection and diagnosis.
Ma, X., Zhou, C. & Kemp, I. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 684-688 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Molten metal flow visualisation using mutual induction tomography (MIT).
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 2004, 2004 Proceedings of the ASME 7th Biennial Conference on Engineering Systems Design & Analysis. Vol. 1. 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.
Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.
Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.
Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Shear failure strength of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.
Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Electroforming for Injection Moulding
Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Annular sector plates: comparison of full-section and layer yield predictions.
Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Wavelets for the analysis and compression of partial discharge data.
Ma, X., Zhou, C. & Kemp, I. J., 7/08/2002, Conference on Electrical Insulation and Dielectric Phenomena, 2001 Annual Report.. IEEE, p. 329-334 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Investigation into the use of wavelet theory for partial discharge pulse extraction in electrically noisy environments.
Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Dielectric Materials, Measurements and Applications, 2000. Eighth International Conference on (IEE Conf. Publ. No. 473). IEE, p. 123-126 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
DSP based partial discharge characterisation by wavelet analysis.
Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Proceedings. ISDEIV. XIXth International Symposium on Discharges and Electrical Insulation in Vacuum, 2000.. IEEE, Vol. 2. p. 780 -783
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
PD pulse propagation studies using the wavelet transform.
Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Electrical Insulation and Dielectric Phenomena, 2000 Annual Report Conference on. IEEE, Vol. 2. p. 626 -629
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
"Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".
Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elasto-plastic large deflection of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.
Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates: comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp press, p. 49-59 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates – comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.
Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.
Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1
Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid behaviour of civil engineering structural connection.
Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Frame connections.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Plate-to-plate mechanical: part II: testing and applications.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connection in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.
Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, p. 243-253 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
On bending of rhombic plates.
Kobayashi, H., Ishikawa, K. & Turvey, G. J., 1994, Proceedings of the annual conference of Japanese society of civil engineers.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Entry for encyclopedia/dictionary
Published
Graduate Attributes and Generic Skills in Remote Teaching
Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 3/03/2023, Scholarly Community Encyclopdeia: Education, Scientific Disciplines. Basel, Switzerland: MDPI AG, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
University Programmes during COVID-19 Pandemic
Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Economic Aspects of Fiber Reinforced Polymer Composite Recycling
Amaechi, C. V., Odijie, A. C., Orok, E. O. & Ye, J., 20/01/2020, Encyclopedia of Renewable and Sustainable Materials. Choudhury, I. & Hashmi, S. (eds.). Elsevier, Vol. 1. p. 377-397 21 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Recycling of Renewable Composite Materials in the Offshore Industry
Amaechi, C. V., Agbomerie, C. O., Sotayo, A., Wang, F., Hou, X. & Ye, J., 1/09/2019, Reference Module in Materials Science and Materials Engineering. Elsevier
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Conference contribution/Paper
Published
TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development
Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă, M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Minimal Waste Galvonometer Field Correction for Additive Manufacturing
King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Multivariable Regression Analysis for Optimised Mass Calculation of MEX 3D Printed Parts
Doicin, C-V., Ulmeanu, M-E., Rennie, A. & Lupeanu, E., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019). Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
University Brand Management through Additive Manufacturing Applications
Doicin, C-V., Ulmeanu, M-E., Abram, T. N., Rennie, A. E. W., Cîtu, D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Offshore applications of Composite marine risers and submarine hoses in deep waters
Amaechi, C. V. & Ye, J., 29/05/2018, Composite marine risers and submarine hose applications for deep waters. Lancaster University, (20 Minutes Talk, Engineering Department).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M-E., Ulmeanu, L., Doicin, C-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials
Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fault diagnosis in multi-machine power systems using the Derivative-free nonlinear Kalman Filter
Rigatos, G., Siano, P., Wira, P. & Ma, X., 13/06/2016, Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016 IEEE Workshop on. IEEE, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation
Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Condition monitoring of wind turbines based on extreme learning machine
Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres
Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams
Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Horizon 2020 TWEETHER project for W-band high data rate wireless communications
Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR
Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...10 Next

Research

Structures, Materials and Manufacturing

Quick Links

Connect With Us