Home > Research > Researchers > Dr Geoffrey Turvey > Publications

Dr Geoffrey Turvey

Senior Lecturer

  1. 2021
  2. Published

    Inclined composite guardrails/safety barriers – Numerical and experimental evaluation of their transverse stiffnesses and compliance with standards

    Turvey, G. J. & Sutch, A., 15/11/2021, In: Composite Structures. 276, 9 p., 114552.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. 2020
  4. Published

    Two-bay pultruded GFRP safety Barrier/Guardrail – Testing, analysis and compliance with standards

    Turvey, G. J. & Milburn, J., 1/12/2020, In: Composite Structures. 253, 12 p., 112745.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Published

    The gravity load simulator – Re-visited

    Wang, P. & Turvey, G. J., 1/08/2020, In: structures. 26, p. 204-213 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations

    Esmaeilzadeh, M., Kadkhodayan, M., Mohammadi, S. & Turvey, G., 31/03/2020, In: Applied Mathematics and Mechanics. 41, p. 439-458 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. 2019
  8. Published

    Effect of Shear on the Flexure of Pultruded GFRP Tubes

    Holton, J. & Turvey, G., 3/09/2019, p. 55-61. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  9. Published

    Experimental investigation and Finite Element (FE) analysis of the load-deformation response of PVC fencing structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 1/06/2019, In: structures. 19, p. 424-435 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. 2018
  11. Published

    Thermo-mechanically loaded glass-fibre-reinforced polymer single-bolt single-lap joints

    Turvey, G. J. & Szulik, M., 11/2018, In: Proceedings of the ICE - Structures and Buildings. 171, 11, p. 830-841 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis

    Turvey, G. J. & Zhang, Y-S., 15/10/2018, In: Composite Structures. 202, p. 1164-1175 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  13. Published

    Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications

    Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. E-pub ahead of print

    Mechanical properties of pultruded GFRP WF, channel and angle profiles for limit state/permissible stress design

    Turvey, G. J. & Zhang, Y., 7/04/2018, (E-pub ahead of print) In: Composites Part B: Engineering. 148, p. 260-271 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. 2017
  16. Published

    Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints

    Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  17. 2016
  18. Published

    Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing

    Sotayo, A., Green, S. M. & Turvey, G. J., 15/12/2016, In: Composite Structures. 158, p. 44-55 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    CFRP stiffened GFRP continuous beams – a simple closed-form analysis and its experimental verification for serviceability limit deformations

    Turvey, G. J., 1/10/2016, In: Composite Structures. 153, p. 952-960 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Pultruded GFRP double-lap single-bolt tension joints - temperature effects on mean and characteristic failure stresses and knock-down factors

    Turvey, G. J. & Sana, A., 1/10/2016, In: Composite Structures. 153, p. 624-631 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  21. Published

    Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials

    Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  22. Published

    Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state

    Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    Experimental investigation of recycled carpet composites for barrier structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  24. 2015
  25. Published

    Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers

    Turvey, G. J., 1/12/2015, In: Composite Structures. 133, p. 659-669 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  26. Published

    Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams

    Turvey, G. & Cerutti, X., 1/11/2015, In: Composite Structures. 131, p. 490-500 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    Carpet recycling: a review of recycled carpets for structural composites

    Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution

    Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints

    Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  30. Published

    Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams

    Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  31. 2014
  32. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  33. Published

    Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams

    Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’

    Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    Single- and double-lap bolted joints in pultruded composite plate

    Turvey, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  36. 2013
  37. Published

    Testing of pultruded GFRP materials and structures for civil engineering

    Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  38. Published

    Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints

    Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  39. 2012
  40. Published

    A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences

    Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  41. Published

    An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate

    Turvey, G. & Gode, J., 13/09/2012. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  42. Published

    Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate

    Turvey, G., 13/06/2012. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  43. 2011
  44. Published

    Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate

    Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints

    Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions

    Turvey, G., 6/09/2011, p. 470-481.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  47. Published

    Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites

    Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  48. 2010
  49. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  50. Published

    Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams

    Turvey, G., 7/09/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  51. 2009
  52. Published

    An experimental investigation of bolt pull-through in pultruded GRP plate

    Turvey, G., 1/09/2009, p. 462-472. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  53. Published

    Environmental effects on the failure of GRP multi-bolt joints

    Turvey, G. J. & Wang, P., 08/2009, In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  54. Published

    Failure of pultruded GRP angle leg junctions in tension

    Turvey, G. & Wang, P., 27/07/2009. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  55. 2008
  56. Published

    Buckling of CFRP stiffened GRP flanges

    Amal Afifi, 22/07/2008. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  57. Published

    Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment

    Turvey, G., 2/06/2008. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  58. Published

    A new fictitious time for the dynamic relaxation (DXDR) method

    Kadkhodayan, A., Alamatian, J. & Turvey, G. J., 7/05/2008, In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018 23 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener

    Turvey, G. J. & Salehi, M., 2008, In: Thin-Walled Structures. 46, 7-9, p. 991-1002 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. 2007
  61. Published

    Effect of hole clearance on bolt loads in pultruded GRP tension joints

    Turvey, G. & Wang, P., 8/07/2007. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  62. Published

    Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener

    Turvey, G. & Salehi, M., 26/06/2007. 27 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  63. Published

    Opening mode failure of pultruded GRP angle leg junctions

    Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  64. Published

    Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.

    Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  65. Published

    Thermal preconditioning study for bolted tension joints in pultruded GRP plate

    Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 509-513 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Previous 1 2 3 Next

Back to top