Geoffrey Turvey - Publications & Outputs - Research Portal

Dr Geoffrey Turvey

Senior Lecturer

1 - 50 out of 118Page size: 50

RSS feed of this list

Sort by: Type

Chapter (peer-reviewed)
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Chapter
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.
Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.
Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.
Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Shear failure strength of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.
Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Annular sector plates: comparison of full-section and layer yield predictions.
Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
"Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".
Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elasto-plastic large deflection of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.
Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.
Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates: comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp press, p. 49-59 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates – comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.
Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1
Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid behaviour of civil engineering structural connection.
Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Frame connections.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Plate-to-plate mechanical: part II: testing and applications.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connection in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.
Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, p. 243-253 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
On bending of rhombic plates.
Kobayashi, H., Ishikawa, K. & Turvey, G. J., 1994, Proceedings of the annual conference of Japanese society of civil engineers.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Conference contribution/Paper
Published
Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials
Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams
Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’
Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Conference paper
Published
Effect of Shear on the Flexure of Pultruded GFRP Tubes
Holton, J. & Turvey, G., 3/09/2019, p. 55-61. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints
Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Experimental investigation of recycled carpet composites for barrier structures
Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Single- and double-lap bolted joints in pultruded composite plate
Turvey, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Previous 1 2 3 Next

Research

Dr Geoffrey Turvey

Quick Links

Connect With Us