Home > Research > Researchers > Dr Geoffrey Turvey > Publications

Dr Geoffrey Turvey

Senior Lecturer

  1. 2021
  2. Published

    Inclined composite guardrails/safety barriers – Numerical and experimental evaluation of their transverse stiffnesses and compliance with standards

    Turvey, G. J. & Sutch, A., 15/11/2021, In: Composite Structures. 276, 9 p., 114552.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. 2020
  4. Published

    Two-bay pultruded GFRP safety Barrier/Guardrail – Testing, analysis and compliance with standards

    Turvey, G. J. & Milburn, J., 1/12/2020, In: Composite Structures. 253, 12 p., 112745.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Published

    The gravity load simulator – Re-visited

    Wang, P. & Turvey, G. J., 1/08/2020, In: structures. 26, p. 204-213 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations

    Esmaeilzadeh, M., Kadkhodayan, M., Mohammadi, S. & Turvey, G., 31/03/2020, In: Applied Mathematics and Mechanics. 41, p. 439-458 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. 2019
  8. Published

    Effect of Shear on the Flexure of Pultruded GFRP Tubes

    Holton, J. & Turvey, G., 3/09/2019, p. 55-61. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  9. Published

    Experimental investigation and Finite Element (FE) analysis of the load-deformation response of PVC fencing structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 1/06/2019, In: structures. 19, p. 424-435 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. 2018
  11. Published

    Thermo-mechanically loaded glass-fibre-reinforced polymer single-bolt single-lap joints

    Turvey, G. J. & Szulik, M., 11/2018, In: Proceedings of the ICE - Structures and Buildings. 171, 11, p. 830-841 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis

    Turvey, G. J. & Zhang, Y-S., 15/10/2018, In: Composite Structures. 202, p. 1164-1175 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  13. Published

    Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications

    Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. E-pub ahead of print

    Mechanical properties of pultruded GFRP WF, channel and angle profiles for limit state/permissible stress design

    Turvey, G. J. & Zhang, Y., 7/04/2018, (E-pub ahead of print) In: Composites Part B: Engineering. 148, p. 260-271 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. 2017
  16. Published

    Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints

    Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  17. 2016
  18. Published

    Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing

    Sotayo, A., Green, S. M. & Turvey, G. J., 15/12/2016, In: Composite Structures. 158, p. 44-55 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    CFRP stiffened GFRP continuous beams – a simple closed-form analysis and its experimental verification for serviceability limit deformations

    Turvey, G. J., 1/10/2016, In: Composite Structures. 153, p. 952-960 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Pultruded GFRP double-lap single-bolt tension joints - temperature effects on mean and characteristic failure stresses and knock-down factors

    Turvey, G. J. & Sana, A., 1/10/2016, In: Composite Structures. 153, p. 624-631 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  21. Published

    Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials

    Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  22. Published

    Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state

    Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    Experimental investigation of recycled carpet composites for barrier structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  24. 2015
  25. Published

    Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers

    Turvey, G. J., 1/12/2015, In: Composite Structures. 133, p. 659-669 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  26. Published

    Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams

    Turvey, G. & Cerutti, X., 1/11/2015, In: Composite Structures. 131, p. 490-500 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    Carpet recycling: a review of recycled carpets for structural composites

    Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution

    Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints

    Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  30. Published

    Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams

    Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  31. 2014
  32. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  33. Published

    Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams

    Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’

    Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    Single- and double-lap bolted joints in pultruded composite plate

    Turvey, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  36. 2013
  37. Published

    Testing of pultruded GFRP materials and structures for civil engineering

    Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  38. Published

    Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints

    Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  39. 2012
  40. Published

    A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences

    Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  41. Published

    An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate

    Turvey, G. & Gode, J., 13/09/2012. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  42. Published

    Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate

    Turvey, G., 13/06/2012. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  43. 2011
  44. Published

    Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate

    Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints

    Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions

    Turvey, G., 6/09/2011, p. 470-481.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  47. Published

    Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites

    Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  48. 2010
  49. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  50. Published

    Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams

    Turvey, G., 7/09/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  51. 2009
  52. Published

    An experimental investigation of bolt pull-through in pultruded GRP plate

    Turvey, G., 1/09/2009, p. 462-472. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  53. Published

    Environmental effects on the failure of GRP multi-bolt joints

    Turvey, G. J. & Wang, P., 08/2009, In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  54. Published

    Failure of pultruded GRP angle leg junctions in tension

    Turvey, G. & Wang, P., 27/07/2009. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  55. 2008
  56. Published

    Buckling of CFRP stiffened GRP flanges

    Amal Afifi, 22/07/2008. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  57. Published

    Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment

    Turvey, G., 2/06/2008. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  58. Published

    A new fictitious time for the dynamic relaxation (DXDR) method

    Kadkhodayan, A., Alamatian, J. & Turvey, G. J., 7/05/2008, In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018 23 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener

    Turvey, G. J. & Salehi, M., 2008, In: Thin-Walled Structures. 46, 7-9, p. 991-1002 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. 2007
  61. Published

    Effect of hole clearance on bolt loads in pultruded GRP tension joints

    Turvey, G. & Wang, P., 8/07/2007. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  62. Published

    Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener

    Turvey, G. & Salehi, M., 26/06/2007. 27 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  63. Published

    Opening mode failure of pultruded GRP angle leg junctions

    Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  64. Published

    Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.

    Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  65. Published

    Thermal preconditioning study for bolted tension joints in pultruded GRP plate

    Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 509-513 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  66. 2006
  67. Published

    A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.

    Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  68. Published

    Structural analysis of CFRP-plated pultruded GRP beams.

    Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  69. Published

    Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.

    Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  70. Published

    An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.

    Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  71. Published

    Failure of pultruded GRP WF-section webs in compression - an experimental investigation.

    Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  72. Published

    Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.

    Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  73. 2005
  74. Published

    Tearing failure of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  75. 2004
  76. Published

    An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.

    Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  77. Published

    Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  78. Published

    Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  79. Published

    Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  80. Published

    Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation (LO) approach.

    Narita, Y. & Turvey, G. J., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 7, p. 681-691 11 p.

    Research output: Contribution to Journal/MagazineJournal article

  81. Published

    Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.

    Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  82. Published

    Review of tests on bolted joints between pultruded GRP profiles.

    Turvey, G. J. & Cooper, C., 2004, In: Proceedings of the Institute of Civil Engineers Civil Engineering. 157, 3, p. 211-233 23 p.

    Research output: Contribution to Journal/MagazineJournal article

  83. Published

    Shear failure strength of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  84. Published

    Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.

    Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  85. Published

    Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.

    Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  86. Published

    Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.

    Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  87. 2003
  88. Published

    Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems.

    Mottram, J. T. & Turvey, G. J., 10/2003, In: Progress in Structural Engineering and Materials. 5, 4, p. 195-222 28 p.

    Research output: Contribution to Journal/MagazineJournal article

  89. Published

    Open-hole tension strength of pultruded GRP plate.

    Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published

    Annular sector plates: comparison of full-section and layer yield predictions.

    Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  91. Published

    Tearing failure of web-flange junctions in pultruded GRP profiles.

    Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  92. 2001
  93. Published

    Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity.

    Turvey, G. J. & Salehi, M., 11/2001, In: Computers and Structures. 79, 26-28, p. 2335-2348 14 p.

    Research output: Contribution to Journal/MagazineJournal article

  94. Published

    "Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".

    Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  95. Published

    Effects of temperature on the structural integrity of bolted joints in pultrusions.

    Turvey, G. J. & Wang, P., 2001, In: Composites in constructions. p. 171-176 6 p.

    Research output: Contribution to Journal/MagazineJournal article

  96. Published

    Elasto-plastic large deflection of uniformly loaded sector plates.

    Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  97. Published

    Evaluation of the structural performance of box beams fabricated from a novel system of pultruded profiles.

    Turvey, G. J., 2001, In: Composites in constructions. p. 803-808 6 p.

    Research output: Contribution to Journal/MagazineJournal article

  98. Published

    Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.

    Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  99. 2000
  100. Published

    Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions.

    Turvey, G. J., Mulcahy, N. & Widden, M. B., 12/2000, In: Composite Structures. 50, 4, p. 391-403 13 p.

    Research output: Contribution to Journal/MagazineJournal article

  101. Published

    Bolted connections in PFRP structures.

    Turvey, G. J., 2000, In: Progress in Structural Engineering and Materials. 2, 2, p. 146-156 11 p.

    Research output: Contribution to Journal/MagazineJournal article

  102. Published

    Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.

    Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  103. Published

    Semi-rigid column base connections in pultruded GRP frame structures.

    Turvey, G. J. & Cooper, C., 2000, In: Computers and Structures. 76, 1-3, p. 77-88 12 p.

    Research output: Contribution to Journal/MagazineJournal article

  104. Published

    Uniform and patch loaded steel plates – comparisons between analysis and experiment.

    Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  105. Published

    Uniform and patch loaded steel plates: comparisons between analysis and experiment.

    Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp press, p. 49-59 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  106. 1999
  107. Published

    Flexure of pultruded GRP beams with semi-rigid end connections.

    Turvey, G. J., 12/1999, In: Composite Structures. 47, 1, p. 571-580 10 p.

    Research output: Contribution to Journal/MagazineJournal article

  108. Published

    Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.

    Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  109. Published

    Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1

    Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  110. 1998
  111. Published

    Elastic large deflection analysis of stiffened annular sector plates.

    Turvey, G. J. & Salehi, M., 1998, In: International Journal of Mechanical Sciences. 40, 1, p. 51-70 20 p.

    Research output: Contribution to Journal/MagazineJournal article

  112. Published

    Frame connections.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  113. Published

    Plate-to-plate mechanical: part II: testing and applications.

    Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  114. Published

    Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.

    Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  115. Published

    Semi-rigid behaviour of civil engineering structural connection.

    Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  116. Published

    Semi-rigid connection in pultruded GRP frame structures.

    Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  117. Published

    Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.

    Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  118. Published

    Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction.

    Turvey, G. J., 1998, In: Composite Structures. 42, 4, p. 341-351 11 p.

    Research output: Contribution to Journal/MagazineJournal article

  119. Published

    Torsion tests on pultruded GRP sheet.

    Turvey, G. J., 1998, In: Composites Science and Technology. 58, 8, p. 1343-1351 9 p.

    Research output: Contribution to Journal/MagazineJournal article

  120. Published

    Uplift tests on column base connections in pultruded GRP frames.

    Turvey, G. J. & Cooper, C., 1998, In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292 8 p.

    Research output: Contribution to Journal/MagazineJournal article

  121. 1997
  122. Published

    Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.

    Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.

    Research output: Contribution to Journal/MagazineJournal article

  123. Published

    Circular plates with one diametral stiffener: an elastic large deflection analysis.

    Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.

    Research output: Contribution to Journal/MagazineJournal article

  124. Published

    Full-section yield analysis of uniformly loaded sector plates.

    Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

Previous 1 2 Next

Back to top