Home > Research > Researchers > Dr Xiaonan Hou > Publications

Research

Dr Xiaonan Hou

Lecturer in Mechanical Engineering

1 - 25 out of 55Page size: 25
RSS feed of this list
  1. Published

    Morphological characterization and reconstruction of fractured heat-treated glass

    Zhu, Y., Yang, J., Wang, X-E., Xie, D. & Hou, X., 15/09/2023, In: Journal of Non-Crystalline Solids. 616, 18 p., 122455.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Dynamic Finite Element Model Based on Timoshenko Beam Theory for Simulating High-Speed Nonlinear Helical Springs

    Zhao, J., Gu, Z., Yang, Q., Shao, J. & Hou, X., 4/04/2023, In: Sensors. 23, 7, 11 p., 3737.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 1/06/2020, In: Composite Structures. 241, 10 p., 112136.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Fracture mechanisms of hybrid adhesive bonded joints: effects of the stiffness of constituents

    Yousefi Kanani, A., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 1/10/2020, In: International Journal of Adhesion and Adhesives . 102, 102649.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    A novel dissimilar single-lap joint with interfacial stiffness improvement

    Yousefi Kanani, A., Hou, X. & Ye, J., 15/11/2020, In: Composite Structures. 252, 11 p., 112741.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 1/01/2021, In: Engineering Structures. 11 p., 111322.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Hybrid and adhesively bonded joints with dissimilar adherends: a critical review

    Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  8. Published

    A novel configuration of a double lap adhesive joint with reduced stress concentrations

    Yousefi Kanani, A., Hou, X. & Ye, J., 7/09/2017, 20th International Conference on Composite Structures - ICCS 20. Tornabene, F. (ed.). Bologna, Italy: Societa Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    A multi-scale model for studying failure mechanisms of composite wind turbine blades

    Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In: Composite Structures. 212, p. 220-229 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions

    Yang, J., Wang, Y., Wang, X. E., Hou, X., Zhao, C. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, B, 13 p., 125595.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration: OMAE2019‑96755

    Wang, F., Amaechi, C. V., Hou, X. & Ye, J., 10/06/2019.

    Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review

  12. Published

    Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact

    Wang, X-E., Huang, X-H., Yang, J., Hou, X., Zhu, Y. & Xie, D., 15/09/2021, In: International Journal of Mechanical Sciences. 206, 20 p., 106613.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming

    Wang, X-E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J. & Hou, X., 31/10/2022, In: International Journal of Adhesion and Adhesives. 118, 12 p., 103230.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives

    Wang, X-E., Kanani, A. Y., Pang, K., Yang, J., Ye, J. & Hou, X., 30/11/2022, In: Thin-Walled Structures. 180, 18 p., 109985.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Particle-based micromechanical modelling of adhesive joint considering microscale surface roughness

    Wang, X-E., Hou, X., Ye, J., Pang, K. & Yang, J., 21/07/2022.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  16. Published

    Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness

    Wang, X., Pang, K., Huang, X., Yang, J., Ye, J. & Hou, X., 31/01/2023, In: Engineering Fracture Mechanics. 277, 19 p., 108954 .

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model

    Wang, X., Yousefi Kanani, A., Gu, Z., Yang, J., Ye, J. & Hou, X., 30/04/2023, In: Theoretical and Applied Fracture Mechanics. 124, 15 p., 103760.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Microscale Discrete Element Model for Simulating Bridging Behavior of Fractured Glass Laminates

    Wang, X. E., Yang, J., Peng, S., Wang, Y. & Hou, X., 20/06/2022, Challenging Glass Conference Proceedings. Belis, J., Bos, F. & Louter, C. (eds.). Vol. 8. 12 p. (Challenging Glass Conference Proceedings; vol. 8).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  19. Published

    Design optimisation of braided composite beams for lightweight rail structures using machine learning methods

    Singh, A., Gu, Z., Hou, X., Liu, Y. & Hughes, D. J., 15/02/2022, In: Composite Structures. 282, 12 p., 115107.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Experimental and numerical investigation into the hybrid joint performance considering microstructural roughness

    Pang, K., Wang, X-E., Ye, J. & Hou, X., 3/11/2022.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  21. Published

    Understanding mixed mode ratio of adhesively bonded joints using genetic programming (GP)

    Liu, Y., Gu, Z., Hughes, D. J., Ye, J. & Hou, X., 15/02/2021, In: Composite Structures. 258, 10 p., 113389.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Joining Technologies for Aluminium Castings—A Review

    Li, D., Slater, C., Cai, H., Hou, X., Li, Y. & Wang, Q., 19/05/2023, In: Coatings. 13, 5, 958.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method

    Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

    Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  25. Published

    A novel 3D composite structure with tunable Poisson's ratio and stiffness

    Hou, X. & Hu, H., 07/2015, In: physica status solidi (b). 252, 7, p. 1565–1574 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 Next

Back to top