Home > Research > Researchers > Dr Xiaonan Hou > Publications

Dr Xiaonan Hou

Lecturer in Mechanical Engineering

  1. Published

    Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points

    Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In: Computational Materials Science. 50, 4, p. 1292–1298 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  2. Published

    Nonlinear compression behavior of warp-knitted spacer fabric: effect of sandwich structure

    Hou, X., Hu, H., Liu, Y. & Silberschmidt, V., 2011, In: Computers, Materials & Continua. 23, 2, p. 119-134 16 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. Published

    2D finite element analysis of thermally bonded nonwoven materials: continuous and discontinuous models

    Hou, X., Acar, M. & Silberschmidt, V., 09/2009, In: Computational Materials Science. 46, 3, p. 700–707 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    Tensile behaviour of low density thermally bonded nonwoven material

    Hou, X., Acar, M. & Silberschmidt, V., 2009, In: Journal of Engineered Fibres and Fabrics . 4, 1, p. 26-33 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Published

    A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In: Journal of Materials Science. 48, 24, p. 8493-8500 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Double lap adhesive joint with reduced stress concentration: effect of slot

    Hou, X., Yousefi Kanani, A. & Ye, J., 15/10/2018, In: Composite Structures. 202, p. 635-642 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    Tensile behavior of low density thermally bonded nonwoven material

    Hou, X., Acar, M. & Silberschmidt, V. V., 20/04/2009, In: Journal of Engineered Fibers and Fabrics. 4, 1, p. 26-33 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method

    Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    Joining Technologies for Aluminium Castings—A Review

    Li, D., Slater, C., Cai, H., Hou, X., Li, Y. & Wang, Q., 19/05/2023, In: Coatings. 13, 5, 958.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Understanding mixed mode ratio of adhesively bonded joints using genetic programming (GP)

    Liu, Y., Gu, Z., Hughes, D. J., Ye, J. & Hou, X., 15/02/2021, In: Composite Structures. 258, 10 p., 113389.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  11. Published

    Experimental and numerical investigation into the hybrid joint performance considering microstructural roughness

    Pang, K., Wang, X-E., Ye, J. & Hou, X., 3/11/2022.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  12. Published

    Design optimisation of braided composite beams for lightweight rail structures using machine learning methods

    Singh, A., Gu, Z., Hou, X., Liu, Y. & Hughes, D. J., 15/02/2022, In: Composite Structures. 282, 12 p., 115107.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  13. Published

    Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration: OMAE2019‑96755

    Wang, F., Amaechi, C. V., Hou, X. & Ye, J., 10/06/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  14. Published

    Experimental and analytical study on the pre-crack impact response of thick multi-layered laminated glass under hard body impact

    Wang, X-E., Huang, X-H., Yang, J., Hou, X., Zhu, Y. & Xie, D., 15/09/2021, In: International Journal of Mechanical Sciences. 206, 20 p., 106613.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming

    Wang, X-E., Kanani, A. Y., Gu, Z., Yang, J., Ye, J. & Hou, X., 31/10/2022, In: International Journal of Adhesion and Adhesives. 118, 12 p., 103230.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives

    Wang, X-E., Kanani, A. Y., Pang, K., Yang, J., Ye, J. & Hou, X., 30/11/2022, In: Thin-Walled Structures. 180, 18 p., 109985.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    Particle-based micromechanical modelling of adhesive joint considering microscale surface roughness

    Wang, X-E., Hou, X., Ye, J., Pang, K. & Yang, J., 21/07/2022.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  18. Published

    Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness

    Wang, X., Pang, K., Huang, X., Yang, J., Ye, J. & Hou, X., 31/01/2023, In: Engineering Fracture Mechanics. 277, 19 p., 108954 .

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model

    Wang, X., Yousefi Kanani, A., Gu, Z., Yang, J., Ye, J. & Hou, X., 30/04/2023, In: Theoretical and Applied Fracture Mechanics. 124, 15 p., 103760.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Microscale Discrete Element Model for Simulating Bridging Behavior of Fractured Glass Laminates

    Wang, X. E., Yang, J., Peng, S., Wang, Y. & Hou, X., 20/06/2022, Challenging Glass Conference Proceedings. Belis, J., Bos, F. & Louter, C. (eds.). Vol. 8. 12 p. (Challenging Glass Conference Proceedings; vol. 8).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    Local bridging effect of fractured laminated glass with EVA based hybrid interlayers under weathering actions

    Yang, J., Wang, Y., Wang, X. E., Hou, X., Zhao, C. & Ye, J., 3/01/2022, In: Construction and Building Materials. 314, B, 13 p., 125595.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    A multi-scale model for studying failure mechanisms of composite wind turbine blades

    Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In: Composite Structures. 212, p. 220-229 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints

    Yousefi Kanani, A., Hou, X. & Ye, J., 1/06/2020, In: Composite Structures. 241, 10 p., 112136.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Fracture mechanisms of hybrid adhesive bonded joints: effects of the stiffness of constituents

    Yousefi Kanani, A., Liu, Y., J.Hughes, D., Ye, J. & Hou, X., 1/10/2020, In: International Journal of Adhesion and Adhesives . 102, 102649.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Published

    A novel dissimilar single-lap joint with interfacial stiffness improvement

    Yousefi Kanani, A., Hou, X. & Ye, J., 15/11/2020, In: Composite Structures. 252, 11 p., 112741.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Back to top