Yingtao Tian - Publications & Outputs - Research Portal

Dr Yingtao Tian

Formerly at Lancaster University

1 - 94 out of 94Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

2023
Published
A numerical exploration of structural efficiency of steel plates with 3D sinusoidal wave patterns
Wang, J., Evernden, M., Chater, B., Pan, J., Tian, Y. & Li, R., 31/12/2023, In: structures. 58, 105352.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tensile strength and wear resistance of glass-reinforced PA1212 fabricated by selective laser sintering
Wu, T., Ren, Y., Liang, L., Wen, J., Wu, H., Tian, Y., Tey, W. S. & Zhou, K., 31/12/2023, In: Virtual and Physical Prototyping. 18, 1
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Prediction of Electron Beam Welding Penetration Depth Using Machine Learning-Enhanced Computational Fluid Dynamics Modelling
Yin, Y., Tian, Y., Ding, J., Mitchell, T. & Qin, J., 24/10/2023, In: Sensors. 23, 21, 8687.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and numerical study of 3D printed steel plates stiffened by sinusoidal waves for enhanced stability
Pan, J., Wang, J., Evernden, M., Tian, Y., Chater, B. & Li, R., 15/10/2023, In: Engineering Structures. 293, 116577.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Enhancing catalytic performance of Fe-based metallic glasses by selective laser melting and electrochemical dealloying
Liu, Z., Zhang, P., Jiang, Q., Zhang, X., Yan, H., Shi, H., Yu, Z., Tian, Y., Ma, S. & Sun, T., 6/10/2023, In: Journal of Manufacturing Processes. 103, p. 274-286 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Contactless 3D surface characterization of additive manufactured metallic components using terahertz time-domain spectroscopy
Lu, Y., Zhu, H., Zaman, A. M., Rennie, A. E. W., Lin, H., Tian, Y. & Degl’Innocenti, R., 9/08/2023, In: Optical Materials Express. 13, 9, 13 p., 2513.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles
Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Enhancing bonding synergy and mechanical response of metal/composite hybrid joints through physicochemical surface pretreatment
Wang, S., Wang, W., Xu, Y., Tian, Y., Zhang, X. & Huang, H., 30/06/2023, In: Journal of Materials Processing Technology. 315, 117923.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Recent Advances in Metal Powder-Based Additive Manufacturing
Wu, H., Ren, Y., Tian, Y. & Caballero, A. O., 26/05/2023, In: Materials. 16, 11, 3975.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of laser scannings speed on microstructure, tribological and corrosion behavior of Ti-23Nb alloys produced by laser metal deposition
Ren, Y., Wu, H., Du, J., Liu, B., Wang, X., Jiao, Z., Tian, Y. & Baker, I., 31/03/2023, In: Materials Characterization. 197, 8 p., 112647.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electron beam weld penetration depth prediction improved by beam characterisation
Yin, Y., Kennedy, A., Mitchell, T., Sieczkiewicz, N., Jefimovs, V. & Tian, Y., 31/03/2023, In: International Journal of Advanced Manufacturing Technology. 125, 1-2, p. 399-415 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser Welding Penetration Monitoring Based on Time-Frequency Characterization of Acoustic Emission and CNN-LSTM Hybrid Network
Luo, Z., Wu, D., Zhang, P., Ye, X., Shi, H., Cai, X. & Tian, Y., 15/02/2023, In: Materials. 16, 4, 22 p., 1614.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2022
Published
Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel
Zhu, H., Rennie, A., Li, R. & Tian, Y., 31/12/2022, In: Surfaces and Interfaces. 35, 12 p., 102442.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite
Wang, S., Xu, Y., Wang, W., Tian, Y., Zhang, X., Huang, H. & Zheng, D., 30/11/2022, In: Journal of Manufacturing Processes. 83, p. 729-741 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Highly water-stable bimetallic organic framework MgCu-MOF74 for inhibiting bacterial infection and promoting bone regeneration
Liu, J., Tan, Y., Shen, E., Liu, B., Tian, Y., Liang, L., Yan, X. & Wu, H., 23/11/2022, In: Biomedical Materials. 17, 6, 13 p., 065026.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of periodic surface structures induced by femtosecond laser irradiation on the antibacterial properties of Zr-based amorphous material
Huang, H., Zhang, P., Yu, Z., Zhang, X., Shen, L., Shi, H., Yan, H., Wang, L. & Tian, Y., 31/10/2022, In: Optik. 268, 15 p., 169760.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure and corrosion resistance of powder metallurgical Ti-Nb-Zr-Mg alloys with low modulus for biomedical application
Li, G., Shen, E., Liang, L., Li, K., Lu, Y., Zhu, W., Tian, Y., Baker, I. & Wu, H., 31/10/2022, In: Materials Characterization. 192, 112223.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure, mechanical and tribological properties of a Ti-5Cu alloy and a B4C/Ti-5Cu in situ composite fabricated by laser powder bed fusion
Ren, Y., Wu, H., Agbedor, S.-O., Lu, Y., Zhang, Y., Fang, Q., Li, J., Tian, Y. & Baker, I., 31/10/2022, In: Materials Characterization. 192, 9 p., 112217.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Preparing Sr-containing nano-structures on micro-structured titanium alloy surface fabricated by additively manufacturing to enhance the anti-inflammation and osteogenesis
Li, G., Liu, W., Liang, L., Liu, T., Tian, Y. & Wu, H., 31/10/2022, In: Colloids and Surfaces B: Biointerfaces. 218, 12 p., 112762.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simultaneously stimulated osteogenesis and anti-bacteria of physically cross-linked double-network hydrogel loaded with MgO-Ag 2O nanocomposites.
Liu, J., Yang, S., Tan, Y., Liu, X., Tian, Y., Liang, L. & Wu, H., 31/10/2022, In: Biomaterials Advances. 141, 11 p., 213123.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure, mechanical properties and corrosion behavior of additively-manufactured Fe–Mn alloys
Liu, P., Wu, H., Liang, L., Song, D., Liu, J., Ma, X., Li, K., Fang, Q., Tian, Y. & Baker, I., 5/09/2022, In: Materials Science and Engineering: A. 852, 13 p., 143585.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Biocompatibility of micro/nano structures on the surface of Ti6Al4V and Ti-based bulk metallic glasses induced by femtosecond laser
Huang, H., Zhang, P., Tang, M., Shen, L., Yu, Z., Shi, H. & Tian, Y., 31/08/2022, In: Biomaterials Advances. 139, 19 p., 212998.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser additive manufacturing and post-heat treatment on microstructure and mechanical properties of 9Cr steel
Feng, J., Zhang, P., Jia, Z., Yu, Z., Fang, C., Yan, H., Shi, H., Tian, Y. & Xie, F., 31/08/2022, In: International Journal of Pressure Vessels and Piping. 198, 104681.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface Roughness Measurement of 3D-Printed 316L Stainless Steel Surface using Terahertz Time-Domain Spectroscopy
Lu, Y., Zhu, H., Zaman, A., Lin, H., Degl'Innocenti, R. & Tian, Y., 28/08/2022, 2022 47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz). IEEE, 2 p. ( International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz)).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Microstructure, mechanical properties and biocompatibility of laser metal deposited Ti–23Nb coatings on a NiTi substrate
Ren, Y., Du, J., Liu, B., Jiao, Z. B., Tian, Y., Baker, I. & Wu, H., 19/07/2022, In: Materials Science and Engineering: A. 848, 12 p., 143402.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study of mode transition in three-dimensional laser beam oscillating welding of aluminum alloy
Liu, Z., Zhang, P., Yan, M., Yu, Z., Tian, Y. & Wu, D., 31/05/2022, In: Journal of Materials Processing Technology. 303, 12 p., 117490.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Progress and perspectives of in-situ optical monitoring in laser beam welding: Sensing, characterization and modeling
Wu, D., Zhang, P., Yu, Z., Gao, Y., Zhang, H., Chen, H., Chen, S. & Tian, Y., 31/03/2022, In: Journal of Manufacturing Processes. 75, p. 767-791 25 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Femtosecond laser-induced transformation mechanism from 1D groove structure to 2D microholes structure on the surface of Zr-based metallic glasses
Huang, H., Zhang, P., Yu, Z., Shen, L., Shi, H. & Tian, Y., 28/02/2022, In: Optics and Laser Technology. 146, 14 p., 107555.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review
Zhang, P., Tan, J., Tian, Y., Yan, H. & Yu, Z., 28/02/2022, In: International Journal of Advanced Manufacturing Technology. 118, 7-8, p. 2017-2057 41 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure and tribological behaviors of FeCoCrNiMoSix high-entropy alloy coatings prepared by laser cladding
Yang, Y., Ren, Y., Tian, Y., Li, K., Bai, L., Huang, Q., Shan, Q., Tian, Y. & Wu, H., 25/02/2022, In: Surface and Coatings Technology. 432, 9 p., 128009.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Influence of the microstructure on mechanical properties of SLM additive manufacturing Fe-based bulk metallic glasses
Jiang, Q., Zhang, P., Tan, J., Yu, Z., Tian, Y., Ma, S. & Wu, D., 15/02/2022, In: Journal of Alloys and Compounds. 894, 13 p., 162525.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel FeCrMoCSi metallic glass with excellent corrosion resistance and in vitro cellular response for biomedical applications
Li, K., Liang, L., Huang, Q., Xiao, J., Tian, Y. & Wu, H., 31/01/2022, In: Journal of Materials Science. 57, p. 618-632 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
AlCoCrFeNi high entropy alloy fabricated via selective laser melting reinforced by Fe-based metallic glass
Jiang, Q., Zhang, P., Yu, Z., Tian, Y. & Ma, S., 15/01/2022, In: Materials Letters. 307, 5 p., 130994.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2021
Published
Microstructures and mechanical properties of reduced activation ferritic/martensitic steel fabricated by laser melting deposition
Feng, J., Zhang, P., Jia, Z., Yu, Z., Fang, C., Yan, H., Shi, H. & Tian, Y., 31/12/2021, In: Fusion Engineering and Design. 173, 12 p., 112865.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure and properties of FeCoCrNiMoSix high-entropy alloys fabricated by spark plasma sintering
Yang, Y., Ren, Y., Tian, Y., Li, K., Zhang, W., Shan, Q., Huang, Q. & Wu, H., 5/12/2021, In: Journal of Alloys and Compounds. 884, 9 p., 161070.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The femtosecond laser induced Zr64.13Cu15.75Ni10.12Al10 amorphous periodic surface structure
Wang, J., Zhang, P., Shen, L., Yu, Z., Shi, H. & Tian, Y., 30/09/2021, In: Journal of Manufacturing Processes. 69, p. 613-620 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The response of macrophages and their osteogenic potential modulated by micro/nano-structured Ti surfaces
Liu, W., Liang, L., Liu, B., Zhao, D., Tian, Y., Huang, Q. & Wu, H., 30/09/2021, In: Colloids and Surfaces B: Biointerfaces. 205, 11 p., 111848.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-step electrochemical polishing of additively manufactured 316L stainless steel components
Zhu, H., Tian, Y. & Rennie, A., 16/09/2021. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Selective laser melted AlSi10Mg alloy under melting mode transition: Microstructure evolution, nanomechanical behaviors and tensile properties
Wu, H., Ren, Y., Ren, J., Liang, L., Li, R., Fang, Q., Cai, A., Shan, Q., Tian, Y. & Baker, I., 25/08/2021, In: Journal of Alloys and Compounds. 873, 10 p., 159823.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review on the effect of laser pulse shaping on the microstructure and hot cracking behavior in the welding of alloys
Zhang, P., Jia, Z., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Chen, J., Wang, F. & Tian, Y., 1/08/2021, In: Optics and Laser Technology. 140, 20 p., 107094.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro-textures
Wang, W., Wang, S., Zhang, X., Xu, Y., Tian, Y. & Huang, H., 15/07/2021, In: Materials Letters. 295, 4 p., 129872.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process
Wang, W., Du, M., Zhang, X., Luan, C. & Tian, Y., 1/07/2021, In: Materials. 14, 13, 15 p., 3700.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Review on Additive Manufacturing of Pure Copper
Jiang, Q., Zhang, P., Yu, Z., Shi, H., Wu, D., Yan, H., Ye, X., Lu, Q. & Tian, Y., 21/06/2021, In: Coatings. 11, 6, 30 p., 740.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Evidence of solidification crack propagation in pulsed laser welding of aluminum alloy
Jia, Z., Zhang, P., Yu, Z., Wu, D., Tian, Y. & Yan, H., 7/06/2021, In: Optics Express. 29, 12, p. 18495-18501 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Weld zone porosity elimination process of galvanized steel zero-gap lap joints in remote laser spiral welding
Xiong, W., Zhang, P., Yu, Z., Yan, H., Wu, D., Lu, Q. & Tian, Y., 2/06/2021, In: MATERIALS RESEARCH EXPRESS. 8, 6, 16 p., 066502.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Using hierarchical mesoporous Mg-Al LDH as a potential model to precisely load BSA for biological application
Li, X., Liang, L., Tan, Y., Huang, Q., Yang, S., Tian, Y., Zhou, J. & Wu, H., 24/05/2021, In: Journal of Micromechanics and Molecular Physics. 5, 4, 18 p., 2050012.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructures and mechanical properties of Nb nanoparticles modified Ni60 hard-facing alloy fabricated by laser metal deposition
Liu, L., Wang, W., Zhang, X., Li, X., Tian, Y. & Zhao, X., 13/05/2021, In: Materials Science and Engineering: A. 814, 13 p., 141238.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of phase transformation on mechanical properties of Al16.80Co20.74Cr20.49Fe21.28Ni20.70 high entropy alloy coatings processed by laser cladding
Wei, X., Zhang, P., Yu, Z., Yan, H., Wu, D., Shi, H., Chen, J., Lu, Q., Tian, Y., Ma, S. & Lei, W., 5/05/2021, In: Journal of Alloys and Compounds. 862, 16 p., 158563.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of deposition rate on microstructure and mechanical properties of wire arc additive manufacturing of Ti-6Al-4V components
Zhang, P.-L., Jia, Z.-Y., Yan, H., Yu, Z.-S., Wu, D., Shi, H.-C., Wang, F.-X., Tian, Y.-T., Ma, S.-Y. & Lei, W.-S., 30/04/2021, In: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology). 28, 4, p. 1100-1110 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties
Wang, W., Wang, S., Zhang, X., Chen, F., Xu, Y. & Tian, Y., 30/04/2021, In: Journal of Manufacturing Processes. 64, p. 530-543 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings
Yuan, W., Li, R., Chen, Z., Gu, J. & Tian, Y., 15/01/2021, In: Surface and Coatings Technology. 405, 13 p., 126582.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fabrication, microstructure and micromechanical properties of Fe-based metallic glass coating manufactured by laser
Zhang, P., Zhang, Q., Yan, H., Yu, Z., Yang, J., Chen, J., Wu, D., Shi, H., Tian, Y., Ma, S. & Lei, W., 15/01/2021, In: Surface and Coatings Technology. 405, 14 p., 126726.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of zinc on the fracture behavior of galvanized steel/6061 aluminum alloy by laser brazing
Zhang, P., Shi, H., Tian, Y., Yu, Z. & Wu, D., 1/01/2021, In: Welding in the World. 65, p. 13–22 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research on weld formation mechanism of laser-MIG arc hybrid welding with butt gap
Huang, H., Zhang, P., Yan, H., Liu, Z., Yu, Z., Wu, D., Shi, H. & Tian, Y., 1/01/2021, In: Optics and Laser Technology. 133, 13 p., 106530.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2020
Published
Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion
Ren, Y., Liang, L., Shan, Q., Cai, A., Du, J., Huang, Q., Liu, S., Yang, X., Tian, Y. & Wu, H., 31/12/2020, In: Virtual and Physical Prototyping. 15, S1, p. 543-554 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study on Ultrasound Welding Process of Aluminum/Copper Dissimilar Metals
Tang, M., Zhang, P., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Wang, F. & Tian, Y., 31/12/2020, In: Physics of Metals and Metallography. 121, 14, p. 1400-1410 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure and Properties of an Al 6061/Galvanized Plate Fabricated by CMT Welding
Zhang, Q., Zhang, P., Yu, Z., Yan, H., Shi, H., Wu, D., Li, S. & Tian, Y., 8/10/2020, In: Journal Wuhan University of Technology, Materials Science Edition. 35, 5, p. 937-945 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of beam defocusing on porosity formation in laser-MIG hybrid welded TA2 titanium alloy joints
Chen, S., Luo, S., Yu, H., Geng, H., Xu, G., Li, R. & Tian, Y., 1/10/2020, In: Journal of Manufacturing Processes. 58, p. 1221-1231 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure, oxidation resistance and mechanical properties of stellite 12 composite coating doped with submicron TiC/B4C by laser cladding
Cheng, Q., Shi, H., Zhang, P., Yu, Z., Wu, D., He, S. & Tian, Y., 15/08/2020, In: Surface and Coatings Technology. 395, 11 p., 125810.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of positive/negative electrode ratio on cold metal transfer welding of 6061 aluminum alloy
Zhang, P., Li, G., Yan, H. & Tian, Y., 29/02/2020, In: International Journal of Advanced Manufacturing Technology. 106, 3-4, p. 1453-1464 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Magnetic-field-assisted laser cladding in the preparation of a crack-free Fe-Cr-Mo-C-Y-B amorphous coating on steel
Zhang, Q., Zhang, P., Yan, H., Yu, Z., Wu, D., Shi, H., Li, S. & Tian, Y., 29/02/2020, In: Philosophical Magazine Letters. 100, 2, p. 86-93 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser powder bed fusion of precipitation-hardened martensitic stainless steels: a review
Zai, L., Zhang, C., Wang, Y., Guo, W., Wellmann, D., Tong, X. & Tian, Y., 14/02/2020, In: Metals. 10, 2, 25 p., 255.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructures and mechanical properties of ni60 alloy fabricated by laser metal deposition
Wang, W., Liu, L., Zhang, X., Shi, Z., Tian, Y. & Lin, J., 20/01/2020, In: MATERIALS RESEARCH EXPRESS. 7, 1, 9 p., 016569.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser cladding of Ni60+ 17-4 PH composite for a cracking-free and corrision resistive coating
Chen, Z., Li, R., Gu, J., Zhang, Z., Tao, Y. & Tian, Y., 1/01/2020, In: International Journal of Modern Physics B. 34, 1n03, 2040042.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2019
Published
A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy
Tian, Z., Zhang, C., Wang, D., Liu, W., Fang, X., Wellmann, D., Zhao, Y. & Tian, Y., 20/12/2019, In: Applied Sciences. 10, 1, 14 p., 81.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of heat inputs on the structure of Ni-based amorphous composite coatings applied with laser cladding
Li, R., Chen, Z., Gu, J., Wang, Y., Wu, M. & Tian, Y., 1/07/2019, In: Materiali in Tehnologije. 53, 4, p. 521-526 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation of strengthening mechanism of commercially pure titanium joints fabricated by autogenously laser beam welding and laser-MIG hybrid welding processes
Li, R., Zhang, F., Sun, T., Liu, B., Chen, S. & Tian, Y., 1/03/2019, In: International Journal of Advanced Manufacturing Technology. 101, 1-4, p. 377-389 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten
Sidambe, A. T., Tian, Y., Prangnell, P. B. & Fox, P., 1/01/2019, In: International Journal of Refractory Metals and Hard Materials. 78, p. 254-263 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2018
Published
Finite Element Simulation of Temperature and Stress Field for Laser Cladded Nickel-Based Amorphous Composite Coatings
Li, R., Qiu, Y., Zheng, Q., Liu, B., Chen, S. & Tian, Y., 24/09/2018, In: Coatings. 8, 10, 12 p., 336.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components
Tian, Y., Gora, W. S., Cabo, A. P., Parimi, L. L., Hand, D. P., Tammas-Williams, S. & Prangnell, P. B., 03/2018, In: Additive Manufacturing. 20, p. 11-22 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2017
Published
A study of the sharp yield point of a Ti-22Al-25Nb alloy
Zong, Y., Shao, B., Tian, Y. & Shan, D., 15/04/2017, In: Journal of Alloys and Compounds. 701, p. 727-731 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2016
Published
Submillimetre rectangular waveguides based on SU-8 photoresist micromachining technology
Glynn, D., He, T., Powell, J., Tian, Y., Shang, X. & Lancaster, M. J., 4/10/2016, Microwave Conference (EuMC), 2016 46th European. IEEE, p. 1346-1349 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Submillimetre rectangular waveguides based on SU-8 photoresist micromachining technology
Glynn, D., He, T., Powell, J., Tian, Y., Shang, X. & Lancaster, M. J., 3/10/2016, Microwave Integrated Circuits Conference (EuMIC), 2016 11th European. IEEE, p. 417-420 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of holding time on microstructure and mechanical properties of SiC/SiC joints brazed by Ag-Cu-Ti + B4C composite filler
Dai, X., Cao, J., Tian, Y., Chen, Z., Song, X. & Feng, J., 08/2016, In: Materials Characterization. 118, p. 294-301 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process Optimization of Dual-Laser Beam Welding of Advanced Al-Li Alloys Through Hot Cracking Susceptibility Modeling
Tian, Y., Robson, J. D., Riekehr, S., Kashaev, N., Wang, L., Lowe, T. & Karanika, A., 07/2016, In: Metallurgical and Materials Transactions A. 47, 7, p. 3533-3544 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser polishing - Enhancing surface quality of additively manufactured cobalt chrome and titanium components
Gora, W. S., Tian, Y., Cabo, A. P., Ardron, M., Maier, R. R. J., Prangnell, P., Weston, N. J. & Hand, D. P., 30/05/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Investigation of the phase transformations in Ti-22Al-25Nb alloy
Shao, B., Zong, Y., Wen, D., Tian, Y. & Shan, D., 04/2016, In: Materials Characterization. 114, p. 75-78 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Enhancing surface finish of additively manufactured titanium and cobalt chrome elements using laser based finishing
Gora, W. S., Tian, Y., Cabo, A. P., Ardron, M., Maier, R. R. J., Prangnell, P., Weston, N. J. & Hand, D. P., 2016, In: Physics Procedia. 83, p. 258-263 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2015
Published
Micromachined terahertz Fabry-Perot cavity highly directive antennas
Konstantinidis, K., Feresidis, A. P., Tian, Y., Shang, X. & Lancaster, M. J., 22/10/2015, In: IET Microwaves, Antennas and Propagation. 9, 13, p. 1436-1443 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation of SU8 as a structural material for fabricating passive millimeter-wave and terahertz components
Tian, Y., Shang, X., Wang, Y. & Lancaster, M. J., 10/2015, In: Journal of Micro/Nanolithography, MEMS, and MOEMS. 14, 4, 044507.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2014
Published
Micromachined thick mesh filters for millimeter-wave and terahertz applications
Wang, Y., Yang, B., Tian, Y., Donnan, R. S. & Lancaster, M. J., 03/2014, In: IEEE Transactions on Terahertz Science and Technology. 4, 2, p. 247-253 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electrodeposition of indium bumps for ultrafine pitch interconnection
Tian, Y., Liu, C., Hutt, D. & Stevens, B., 02/2014, In: Journal of Electronic Materials. 43, 2, p. 594-603 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fabrication of multilayered SU8 structure for terahertz waveguide with ultralow transmission loss
Tian, Y., Shang, X. & Lancaster, M. J., 01/2014, In: Journal of Micro/Nanolithography, MEMS, and MOEMS. 13, 1, 6 p., 013002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A micromachined dual-band orthomode transducer
Leal-Sevillano, C. A., Tian, Y., Lancaster, M. J., Ruiz-Cruz, J. A., Montejo-Garai, J. R. & Rebollar, J. M., 2014, In: IEEE Transactions on Microwave Theory and Techniques. 62, 1, p. 55-63 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2013
Published
SU-8 micromachined WR-3 band waveguide bandpass filter with low insertion loss
Chen, Q., Shang, X., Tian, Y., Xu, J. & Lancaster, M. J., 28/03/2013, In: Electronics Letters. 49, 7, p. 480-482 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A SU8 micromachined WR-1.5 band waveguide filter
Shang, X., Tian, Y., Lancaster, M. J. & Singh, S., 2013, In: IEEE Microwave and Wireless Components Letters. 23, 6, p. 300-302 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Micromachined terahertz circuits
Lancaster, M. J., Shang, X. & Tian, Y., 2013, Microwave & Optoelectronics Conference (IMOC), 2013 SBMO/IEEE MTT-S International. IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
2011
Published
Investigation of high speed micro-bump formation through electrodeposition enhanced by megasonic agitation
Tian, Y., Liu, C., Hutt, D., Stevens, B., Flynn, D. & Desmulliez, M. P. Y., 2011, Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. IEEE, p. 739-744 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
2009
Published
High density indium bumping through pulse plating used for pixel X-ray detectors
Tian, Y., Hutt, D. A., Liu, C. & Stevens, B., 10/08/2009, Electronic Packaging Technology & High Density Packaging, 2009. ICEPT-HDP '09. International Conference on. IEEE, p. 456-460 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Megasonic agitation for enhanced electrodeposition of copper
Kaufmann, J. G., Desmulliez, M. P. Y., Tian, Y., Price, D., Hughes, M., Strusevich, N., Bailey, C., Liu, C. & Hutt, D., 08/2009, In: Microsystem Technologies. 15, 8, p. 1245-1254 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
High density indium bumping using electrodeposition enhanced by megasonic agitation
Tian, Y., Liu, C., Hutt, D., Stevens, B., Flynn, D. & Desmulliez, M. P. Y., 2009, Electronics Packaging Technology Conference, 2009. EPTC '09. 11th. IEEE, p. 31-35 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
2008
Published
Megasonic enhanced wafer bumping process to enable high density electronics interconnection
Tian, Y., Kaufmann, J., Liu, C., Hutt, D. A., Stevens, B. & Desmulliez, M. P. Y., 2008, Electronics System-Integration Technology Conference, 2008. ESTC 2008. 2nd. IEEE, p. 725-729 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
2005
Published
Weld with trailing impact rolling to control the residual distortion of the thin-walled planar circumferential weldment
Fan, C.-L., Fang, H.-Y., Tao, J., Tian, Y.-T. & Li, M., 2005, In: Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University. 26, 2, p. 238-241 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2004
Published
Influence on metallographic structure and mechanical properties of LY12CZ welded jointed with weld with trailing impactive rolling
Fan, C.-L., Fang, H.-Y., Tian, Y. & Li, M., 2004, In: Cailiao Gongcheng/Journal of Materials Engineering. 10, p. 24-28 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Research

Dr Yingtao Tian

Quick Links

Connect With Us