Rights statement: This is the author’s version of a work that was accepted for publication in Marine Structures. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Marine Structures, 85, 2022 DOI: 10.1016/j.marstruc.2022.103264
Accepted author manuscript, 8.19 MB, PDF document
Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
Final published version
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Research output: Contribution to Journal/Magazine › Journal article › peer-review
}
TY - JOUR
T1 - Multi-impact performance of prestressed CFRP-strengthened RC beams using H-typed end anchors
AU - Huang, Z.
AU - Deng, W.
AU - Li, R.
AU - Chen, J.
AU - Sui, L.
AU - Zhou, Y.
AU - Zhao, D.
AU - Yang, L.
AU - Ye, J.
N1 - This is the author’s version of a work that was accepted for publication in Marine Structures. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Marine Structures, 85, 2022 DOI: 10.1016/j.marstruc.2022.103264
PY - 2022/9/30
Y1 - 2022/9/30
N2 - To address the problem of insufficient ductility of traditional Carbon Fibre-reinforced polymer (CFRP) strengthened marine structures and to enhance the application of CFRP in marine engineering, the present study develops novel prestressed CFRP-strengthened RC beams using H-type end anchors with ductility controllable devices. In this device, part of the reinforcement bars are replaced by CFRP, which is prestressed as the structural enhancement material. The CFRP sheet is connected with a tensioned screw, which is used to realize the function of early warning based on a large plastic deformation when the structure is overloaded. Thus, the ductility of the composite structure could be improved based on yielding of the screw rod rather than the fracture failure of the CFRP sheet compared to that with CFRP bonded. This study investigates the flexural static and impact performance of the representative large-scale RC beams strengthened by prestressed CFRP through four-point bending and drop-weight impact. The results show that the H-typed end anchor and raising the prestress level of CFRP not only improve the ultimate resistance and ductility, but also realize the overload warning function under static load. Accordingly, the design still shows advantages in energy consumption and impact resistance through drop-weight impact. An advanced 3D nonlinear finite element model is built to simulate well the multiple impact performance in terms of the failure modes, impact force and displacement history. This study provides a new approach to address design deficiencies with insufficient ductility behaviour while using CFRP as a strengthening material. This prestressing technology is able to utilize the material efficiency of high-strength CFRP and open a new path for CFRP applications in marine civil engineering.
AB - To address the problem of insufficient ductility of traditional Carbon Fibre-reinforced polymer (CFRP) strengthened marine structures and to enhance the application of CFRP in marine engineering, the present study develops novel prestressed CFRP-strengthened RC beams using H-type end anchors with ductility controllable devices. In this device, part of the reinforcement bars are replaced by CFRP, which is prestressed as the structural enhancement material. The CFRP sheet is connected with a tensioned screw, which is used to realize the function of early warning based on a large plastic deformation when the structure is overloaded. Thus, the ductility of the composite structure could be improved based on yielding of the screw rod rather than the fracture failure of the CFRP sheet compared to that with CFRP bonded. This study investigates the flexural static and impact performance of the representative large-scale RC beams strengthened by prestressed CFRP through four-point bending and drop-weight impact. The results show that the H-typed end anchor and raising the prestress level of CFRP not only improve the ultimate resistance and ductility, but also realize the overload warning function under static load. Accordingly, the design still shows advantages in energy consumption and impact resistance through drop-weight impact. An advanced 3D nonlinear finite element model is built to simulate well the multiple impact performance in terms of the failure modes, impact force and displacement history. This study provides a new approach to address design deficiencies with insufficient ductility behaviour while using CFRP as a strengthening material. This prestressing technology is able to utilize the material efficiency of high-strength CFRP and open a new path for CFRP applications in marine civil engineering.
KW - CFRP
KW - impact performance
KW - post-impact
KW - prestressed structures
KW - FRP-concrete
U2 - 10.1016/j.marstruc.2022.103264
DO - 10.1016/j.marstruc.2022.103264
M3 - Journal article
VL - 85
JO - Marine Structures
JF - Marine Structures
SN - 0951-8339
M1 - 103264
ER -