Publications & Outputs - Research Portal

Publications and Research Outputs

88351 - 88400 out of 98,628Page size: 50

Sort by: Author last name

Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips.
Turvey, G. J. & Osman, M. Y., 1996, In: Composites Part B: Engineering. 27, 5, p. 505-518 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.
Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.
Turvey, G. J. & Drinali, H., 1997, In: Computers and Structures. 63, 4, p. 769-773 5 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Circular plates with one diametral stiffener: an elastic large deflection analysis.
Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, p. 243-253 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Open-hole tension strength of pultruded GRP plate.
Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural analysis of CFRP-plated pultruded GRP beams.
Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.
Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cross-stiffened circular plates: an elasto-plastic large deflection analysis
Turvey, G., 14/09/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams
Turvey, G., 7/09/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of bolt pull-through in pultruded GRP plate
Turvey, G., 1/09/2009, p. 462-472. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP angle leg junctions in tension
Turvey, G. & Wang, P., 27/07/2009. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Environmental effects on the failure of GRP multi-bolt joints
Turvey, G. J. & Wang, P., 08/2009, In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. J. & Salehi, M., 2008, In: Thin-Walled Structures. 46, 7-9, p. 991-1002 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Buckling of CFRP stiffened GRP flanges
Amal Afifi, 22/07/2008. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment
Turvey, G., 2/06/2008. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of hole clearance on bolt loads in pultruded GRP tension joints
Turvey, G. & Wang, P., 8/07/2007. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. & Salehi, M., 26/06/2007. 27 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Opening mode failure of pultruded GRP angle leg junctions
Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G., 6/09/2011, p. 470-481.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution
Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams
Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’
Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Single- and double-lap bolted joints in pultruded composite plate
Turvey, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams
Turvey, G. & Cerutti, X., 1/11/2015, In: Composite Structures. 131, p. 490-500 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state
Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
CFRP stiffened GFRP continuous beams – a simple closed-form analysis and its experimental verification for serviceability limit deformations
Turvey, G. J., 1/10/2016, In: Composite Structures. 153, p. 952-960 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...1764 1765 1766 1767 1768 1769 1770 1771 ...1973 Next

Research

Publications and Research Outputs

Quick Links

Connect With Us