Home > Research > Publications & Outputs > Experimental and theoretical determination of t...

Associated organisational unit

Electronic data

  • 2020HanksPhD

    Final published version, 6.31 MB, PDF document

    Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License

Text available via DOI:

View graph of relations

Experimental and theoretical determination of the transport properties of n-AlxGa1-xSb/GaSb

Research output: ThesisDoctoral Thesis

Published

Standard

Experimental and theoretical determination of the transport properties of n-AlxGa1-xSb/GaSb. / Hanks, Laura.
Lancaster University, 2020. 215 p.

Research output: ThesisDoctoral Thesis

Harvard

APA

Vancouver

Hanks L. Experimental and theoretical determination of the transport properties of n-AlxGa1-xSb/GaSb. Lancaster University, 2020. 215 p. doi: 10.17635/lancaster/thesis/825

Author

Bibtex

@phdthesis{eab085eff9d94559af6efdca3f737877,
title = "Experimental and theoretical determination of the transport properties of n-AlxGa1-xSb/GaSb",
abstract = "The work in this thesis reports on the design, growth, fabrication, measurement and analysis of n-GaSb/Al0.2Ga0.8Sb heterostructures. Initially a growth study was completed in order to minimise the native n-type GaSb defects (usually of p ~ × 1017cm−3 ) and to calibrate the n-type doping (achieved using Te). This growth study then informed simulations of the band structure and the transport properties via Schr{\"o}dinger-Poisson and transport lifetime modelling, allowing an investigation for the design of a high mobility n-GaSb/Al0.2Ga0.8Sb structure, to ensure correct confinement. The optimum designs from the simulation study were then grown and fabricated into 8-pad geometry non-gated Hall bars. The metallisation recipe researched further as initial recipes were deemed unsuitable. The resulting devices were then measured as a function of magnetic field and temperature to obtain the transport properties (mobility and carrier density).It has been shown that an optimum set of growth conditions (Tg= 475 °C, V/III=1.3) reduces the p-type native defects resulting in a hole concentration of 5 × 1016 cm−3 at room temperature. Simulations of AlGaSb/GaSb heterostructures were completed, investigating the conduction band and the effect of the p-type defects. It was found that doping below the well is necessary for confinement in these structures. Both square and triangular quantum wells were grown on semi-insulating GaAs substrates with an interfacial misfit array to prevent strain. These samples were fabricated where the metallisation recipe Pd/In/Pd/Au was used, allowing cold temperature measurements. Measurements of the transport properties across a temperature range of (3-300) K at lowfield (< 3 T) resulted in a peak mobility of 9030 cm2 /Vs, where background impurity scattering was shown to be the limiting scattering rate. High field measurements of a doped heterojunction resulted in Shubnikov-de Haas oscillations visible up to 100 K. As the first transport measurements of confined n-GaSb/AlGaSb, these results inform the direction of optimisation for high mobility devices in this material.",
keywords = "Electron transport properties, MBE GROWTH, AlGaSb/GaSb, Electron Mobility, Transport GaSb",
author = "Laura Hanks",
year = "2020",
month = jan,
day = "20",
doi = "10.17635/lancaster/thesis/825",
language = "English",
publisher = "Lancaster University",
school = "Lancaster University",

}

RIS

TY - BOOK

T1 - Experimental and theoretical determination of the transport properties of n-AlxGa1-xSb/GaSb

AU - Hanks, Laura

PY - 2020/1/20

Y1 - 2020/1/20

N2 - The work in this thesis reports on the design, growth, fabrication, measurement and analysis of n-GaSb/Al0.2Ga0.8Sb heterostructures. Initially a growth study was completed in order to minimise the native n-type GaSb defects (usually of p ~ × 1017cm−3 ) and to calibrate the n-type doping (achieved using Te). This growth study then informed simulations of the band structure and the transport properties via Schrödinger-Poisson and transport lifetime modelling, allowing an investigation for the design of a high mobility n-GaSb/Al0.2Ga0.8Sb structure, to ensure correct confinement. The optimum designs from the simulation study were then grown and fabricated into 8-pad geometry non-gated Hall bars. The metallisation recipe researched further as initial recipes were deemed unsuitable. The resulting devices were then measured as a function of magnetic field and temperature to obtain the transport properties (mobility and carrier density).It has been shown that an optimum set of growth conditions (Tg= 475 °C, V/III=1.3) reduces the p-type native defects resulting in a hole concentration of 5 × 1016 cm−3 at room temperature. Simulations of AlGaSb/GaSb heterostructures were completed, investigating the conduction band and the effect of the p-type defects. It was found that doping below the well is necessary for confinement in these structures. Both square and triangular quantum wells were grown on semi-insulating GaAs substrates with an interfacial misfit array to prevent strain. These samples were fabricated where the metallisation recipe Pd/In/Pd/Au was used, allowing cold temperature measurements. Measurements of the transport properties across a temperature range of (3-300) K at lowfield (< 3 T) resulted in a peak mobility of 9030 cm2 /Vs, where background impurity scattering was shown to be the limiting scattering rate. High field measurements of a doped heterojunction resulted in Shubnikov-de Haas oscillations visible up to 100 K. As the first transport measurements of confined n-GaSb/AlGaSb, these results inform the direction of optimisation for high mobility devices in this material.

AB - The work in this thesis reports on the design, growth, fabrication, measurement and analysis of n-GaSb/Al0.2Ga0.8Sb heterostructures. Initially a growth study was completed in order to minimise the native n-type GaSb defects (usually of p ~ × 1017cm−3 ) and to calibrate the n-type doping (achieved using Te). This growth study then informed simulations of the band structure and the transport properties via Schrödinger-Poisson and transport lifetime modelling, allowing an investigation for the design of a high mobility n-GaSb/Al0.2Ga0.8Sb structure, to ensure correct confinement. The optimum designs from the simulation study were then grown and fabricated into 8-pad geometry non-gated Hall bars. The metallisation recipe researched further as initial recipes were deemed unsuitable. The resulting devices were then measured as a function of magnetic field and temperature to obtain the transport properties (mobility and carrier density).It has been shown that an optimum set of growth conditions (Tg= 475 °C, V/III=1.3) reduces the p-type native defects resulting in a hole concentration of 5 × 1016 cm−3 at room temperature. Simulations of AlGaSb/GaSb heterostructures were completed, investigating the conduction band and the effect of the p-type defects. It was found that doping below the well is necessary for confinement in these structures. Both square and triangular quantum wells were grown on semi-insulating GaAs substrates with an interfacial misfit array to prevent strain. These samples were fabricated where the metallisation recipe Pd/In/Pd/Au was used, allowing cold temperature measurements. Measurements of the transport properties across a temperature range of (3-300) K at lowfield (< 3 T) resulted in a peak mobility of 9030 cm2 /Vs, where background impurity scattering was shown to be the limiting scattering rate. High field measurements of a doped heterojunction resulted in Shubnikov-de Haas oscillations visible up to 100 K. As the first transport measurements of confined n-GaSb/AlGaSb, these results inform the direction of optimisation for high mobility devices in this material.

KW - Electron transport properties

KW - MBE GROWTH

KW - AlGaSb/GaSb

KW - Electron Mobility

KW - Transport GaSb

U2 - 10.17635/lancaster/thesis/825

DO - 10.17635/lancaster/thesis/825

M3 - Doctoral Thesis

PB - Lancaster University

ER -