Home > Research > Researchers > Professor Allan Rennie > Publications

Research

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

201 - 244 out of 244Page size: 100
RSS feed of this list
Sort by: Title
  1. Published

    Social Design Fiction. New Methods for the Design of Emerging Technology.

    Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Sol-gel alumina coating of wired mesh packing

    Aiouache, F., Abdelraouf, M., Hegarty, J., Rennie, A., Elizalde, R., Burns, N., Geekie, L. & Najdanovic, V., 1/09/2020, In: Ceramics International. 46, 13, p. 20777-20787 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

    Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Strength-based Design Analysis of a Para-Plow Tillage Tool

    Celik, H. K., Caglayan, N., Topakci, M., Rennie, A. & Akinci, I., 29/02/2020, In: Computers and Electronics in Agriculture. 169, 15 p., 105168.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Stress analysis of a sample marine crane’s boom under static loading condition

    Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    Structural optimisation of a subsoiler

    Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Structural strength analysis of a rotary drum mower during harvesting

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/02/2024, In: Journal of Agricultural Engineering. 55, 1, 23 p., 1557.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Structural Strength Analysis of a Rotary Drum Mower in Transportation Position

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Study regarding the influence of material type on economic objectives in MEx fabrication

    Ulmeanu, M.-E., Doicin, C.-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A.-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.

    Research output: Contribution to Journal/Magazine › Conference article › peer-review

  10. Published

    Surface finishing techniques for SLM manufactured stainless steel 316L components

    Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Surface Flatness Measurement in Stereolithography

    Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  12. Published

    TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development

    Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Templates for consumer use in designing customised products

    Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  14. Published

    The application of rapid manufacturing technologies in the spare parts industry

    Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  15. Published

    The business model for the functional rapid manufacturing supply chain

    Hasan, S., Rennie, A. & Hasan, J., 01/2014, In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques

    Wrigley, S., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  17. Published

    The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes

    Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  19. Published

    The lost crown of Horus

    Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.

    Research output: Contribution to specialist publication › Article

  20. Published

    The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications

    Lupeanu, M., Rosu, M.-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  21. Unpublished

    The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs

    wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  22. Published

    The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022

    Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Unpublished

    The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services

    Lambert, C., Rennie, A. & Williams, D., 2008, (Unpublished) 10 p.

    Research output: Working paper

  24. Published

    The use of additive manufacture for metallic bipolar plates in polymer electrolyte fuel cell stacks

    Dawson, R., Patel, A., Rennie, A. & White, S., 28/09/2014, In: Chemical Engineering Transactions. 41, p. 175-180 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

    Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  26. Published

    Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication

    Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  27. Published

    Tool Life Performance of Injection Mould Tooling Fabricated by Selective Laser Melting for High-Volume Production

    El Kashouty, M., Rennie, A. & Ghazy, M., 26/11/2019, In: Materials. 12, 23, 23 p., 3910.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Touching history: 3D replica artifacts

    Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.

    Research output: Contribution to specialist publication › Article

  29. Published

    Tuning the wettability of wire mesh column: pore-scale flow analysis

    Abdelraouf, M., Rennie, A., Burns, N., Geekie, L., Najdanovic-Visak, V. & Aiouache, F., 15/11/2021, In: Chemical Engineering Journal Advances. 8, 15 p., 100181.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel

    Zhu, H., Rennie, A., Li, R. & Tian, Y., 31/12/2022, In: Surfaces and Interfaces. 35, 12 p., 102442.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders

    Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    University Brand Management through Additive Manufacturing Applications

    Doicin, C.-V., Ulmeanu, M.-E., Abram, T. N., Rennie, A. E. W., Cîtu , D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  33. Published

    University Programmes during COVID-19 Pandemic

    Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary

  34. Published

    Use of FDM in an undergraduate student project: design, build and test a model wind turbine

    Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  35. Published

    Using additive manufacturing effectively: a CAD tool to support decision making

    Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  36. Published

    Using additive manufacturing to build energy efficient filter supports

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  37. Published

    Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals

    Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  38. Published

    Variable fused deposition modelling: analysis of benefits, concept design and tool path generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Variable Fused Deposition Modelling – Concept Design and Tool Path Generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    Virtual Prototyping

    Rennie, A., 07/2005, N/A. 77 p.

    Research output: Book/Report/Proceedings › Commissioned report

  41. Published

    Virtual Prototyping Phase II

    Rennie, A., 05/2006, N/A. 37 p.

    Research output: Book/Report/Proceedings › Commissioned report

  42. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/Proceedings › Commissioned report

  43. Published

    Virtual Trading System for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  44. Published

    Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles

    Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Previous 1 2 3 Next

Back to top