Allan Rennie - Publications & Outputs - Research Portal

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

1 - 100 out of 244Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

2024
Published
Improved Durability of a Modular Axial Fixator for Stable and Unstable Proximal Femoral Fractures: A Patient-Specific Finite Element Analysis
Celik, H. K., Icen, M., Ozdemir, H. & Rennie, A. E. W., 9/05/2024, In: Journal of Medical Devices. 18, 1, 22 p., 011007.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural strength analysis of a rotary drum mower during harvesting
Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/02/2024, In: Journal of Agricultural Engineering. 55, 1, 23 p., 1557.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Evaluation of stress distribution on an endodontically treated maxillary central tooth with lesion restored with different crown materials: A finite element analysis
Kirmali, O., Icen, G., Celik, H. K. & Rennie, A., 15/02/2024, In: Heliyon. 10, 3, 10 p., e25829.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2023
Published
Structural Strength Analysis of a Rotary Drum Mower in Transportation Position
Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions
Celik, H. K., Gok, S., Caglayan, N. & Rennie, A., 27/08/2023, In: Applied Sciences. 13, 17, 15 p., 9682.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Contactless 3D surface characterization of additive manufactured metallic components using terahertz time-domain spectroscopy
Lu, Y., Zhu, H., Zaman, A. M., Rennie, A. E. W., Lin, H., Tian, Y. & Degl’Innocenti, R., 9/08/2023, In: Optical Materials Express. 13, 9, 13 p., 2513.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis
Celik, H. K., Akinci, I., Erkan, M. & Rennie, A., 31/07/2023, In: Journal of Food Process Engineering. 46, 11, 14 p., e14424.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security
Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles
Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022
Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Novel Feature-Based Manufacturability Assessment System for Evaluating Selective Laser Melting and Subtractive Manufacturing Injection Moulding Tool Inserts
Kashouty, M. F. E., Rennie, A. & Ghazy, M., 22/05/2023, In: Designs. 7, 3, 18 p., 68.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Graduate Attributes and Generic Skills in Remote Teaching
Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 3/03/2023, Scholarly Community Encyclopdeia: Education, Scientific Disciplines. Basel, Switzerland: MDPI AG, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Online and Hybrid Teaching Effects on Graduate Attributes: Opportunity or Cause for Concern?
Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 20/02/2023, In: Education Sciences. 13, 2, 15 p., 221.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of New Sustainable Green Geopolymer Metal Composite (GGMC) Material as Mould Insert for Rapid Tooling (RT) in Injection Moulding Process
Yin, A. T. M., Rahim, S. Z. B. A., Abdullah, M. M. A. B., Nabiałek, M., Abdellah, A. E.-H., Rennie, A., Tahir, M. F. M. & Titu, A. M., 19/02/2023, In: Materials. 16, 4, 38 p., 1724.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis of failure mechanisms of adhesive joints modified by a novel additive manufacturing-assisted method
Kanani, A. Y., Wang, X. E., Hou, X., Rennie, A. E. W. & Ye, J., 15/02/2023, In: Engineering Structures. 277, 9 p., 115428.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Additively manufactured foamed polylactic acid for lightweight structures
Yousefi Kanani, A., Rennie, A. & Rahim, S. Z. B. A., 2/01/2023, In: Rapid Prototyping Journal. 29, 1, p. 50-66 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2022
Published
Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel
Zhu, H., Rennie, A., Li, R. & Tian, Y., 31/12/2022, In: Surfaces and Interfaces. 35, 12 p., 102442.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Irregular Shape Effect of Brass and Copper Filler on the Properties of Metal Epoxy Composite (MEC) for Rapid Tooling Application
Hussin, R., Sharif, S., Rahim, S. Z. B. A., Rennie, A., Suhaimi, M. A., Abdellah, A. E.-H., Shuaib, N. A., Khushairi, M. T. M. & Titu, A. M., 2/11/2022, In: Journal of Manufacturing and Materials Processing. 6, 6, 22 p., 134.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling
Musa, L., Kumar, N. K., Rahim, S. Z. B. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Yousefi Kanani, A. & Azmi, A. A., 30/09/2022, In: Journal of Materials Research and Technology. 20, p. 2841-2858 18 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
How to fix a tibial tubercle osteotomy with distalisation: A finite element analysis
Guneri, B., Kose, O., Celik, H. K., Cakar, A., Tasatan, E. & Rennie, A., 31/08/2022, In: Knee. 37, p. 132-142 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Coronal Fracture Angle on the Stability of Screw Fixation in Medial Malleolar Fractures: A Finite Element Analysis
Emre, T. Y., Celik, H. K., Arik, H. O., Rennie, A. & Kose, O., 1/06/2022, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 236, 6, p. 825-840 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review
Huzaim, N. H. M., Rahim, S., Musa, L., Abdellah, A. E.-H., Abdullah, M. M. A. B., Rennie, A., Rahman, R., Garus, S., Błoch, K., Sandu, A. V., Vizureanu, P. & Nabiałek, M., 23/05/2022, In: Materials. 15, 10, 39 p., 3725.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A literature review on the linear elastic material properties assigned in finite element analyses in dental research
Celik, H. K., Koc, S., Kustarci, A. & Rennie, A., 31/03/2022, In: MATERIALS TODAY COMMUNICATIONS. 30, 10 p., 103087.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2021
Published
Mass optimisation of 3D-printed specimens using multivariable regression analysis
Doicin, C.-V., Ulmeanu, M.-E., Rennie, A. & Lupeanu, E., 31/12/2021, In: International Journal of Rapid Manufacturing. 10, 1, p. 1-22 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Selective Laser Melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry
El Kashouty, M., Rennie, A., Ghazy, M. & El Aziz, A. A., 1/12/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 23, 12 p., 989382.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tuning the wettability of wire mesh column: pore-scale flow analysis
Abdelraouf, M., Rennie, A., Burns, N., Geekie, L., Najdanovic-Visak, V. & Aiouache, F., 15/11/2021, In: Chemical Engineering Journal Advances. 8, 15 p., 100181.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review on graft compatibilizer for thermoplastic elastomer blend
Kumar, N. K., Musa, L., Rasidi, M. S. M., Rahim, S. Z. A., Rahman, R., Azmi, A. A. & Rennie, A., 12/10/2021, In: Journal of Physics: Conference Series. 2080, 8 p., 012003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of Bruising of ‘Pink Lady’ Apple Under Impact Loading in Drop Test on Firmness, Colour and Gas Exchange of Fruit During Long Term Storage
Celik, H. K., Ustun, H., Erkan, M., Rennie, A. & Akinci, I., 30/09/2021, In: Postharvest Biology and Technology. 179, 13 p., 111561.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-step electrochemical polishing of additively manufactured 316L stainless steel components
Zhu, H., Tian, Y. & Rennie, A., 16/09/2021. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle
Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study regarding the influence of material type on economic objectives in MEx fabrication
Ulmeanu, M.-E., Doicin, C.-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A.-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
E-pub ahead of print
Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies: a Finite Element Analysis
Levent, A., Yapti, M., Celik, H. K., Kose, O., Kılıçaslan, Ö. F. & Rennie, A., 23/07/2021, (E-pub ahead of print) In: The Journal of Foot and Ankle Surgery. YJFAS 53575.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Machine Learning for Additive Manufacturing
Grierson, D., Rennie, A. & Quayle, S., 19/07/2021, In: Encyclopedia. 1, 3, p. 576-588 13 p.
Research output: Contribution to Journal/Magazine › Literature review › peer-review
Published
Effect of cartilage thickness mismatch in osteochondral grafting from knee to talus on articular contact pressures: A finite element analysis
Kılıçaslan, Ö. F., Levent, A., Celik, H. K., Tokgöz, M. A., Köse, Ö. & Rennie, A., 11/06/2021, In: Joint Diseases and Related Surgery. 32, 2, p. 355-362 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experiences from COVID-19 and Emergency Remote Teaching for Entrepreneurship Education in Engineering Programmes
Lambert, C. & Rennie, A., 7/06/2021, In: Educational Sciences. 11, 16 p., 282.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Powder Characterization – Methods, Standards and State of the Art
Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
CFD Simulation of Air Flow Behaviour at Different Flow Rates in a Turkish Woodwind Instrument (Turkish Treble Recorder)
Celik, H. K., Bedel, A., Gok, S. & Rennie, A., 28/03/2021, In: Open Journal of Acoustics. 11, 1, p. 1-16 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Additive manufacturing of multielectrode arrays for biotechnological applications
Edwards, A., Hann, C., Ivill, H., Leeson, H., Tymczyszyn, L., Cummings, D., Ashton, M., Harper, G., Spencer, D., Low, W. L., Rajeev, K., Martin-Hirsch, P., Edwards, F., Hardy, J., Rennie, A. & Cheneler, D., 7/03/2021, In: Materials Advances. 2021, 2, p. 1600-1605 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An Efficient Triangle Mesh Slicing Algorithm for All Topologies in Additive Manufacturing
King, B., Rennie, A. & Bennett, G. R., 1/01/2021, In: International Journal of Advanced Manufacturing Technology. 112, p. 1023-1033 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2020
Published
University Programmes during COVID-19 Pandemic
Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Online Delivery of Teaching and Laboratory Practices: Continuity of University Programmes during COVID-19 Pandemic
Gamage, K. A. A., Wijesuriya, D., Ekanayake, S., Rennie, A., Lambert, C. & Gunawardhana, N., 19/10/2020, In: Educational Sciences. 10, 10, 9 p., 291.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sol-gel alumina coating of wired mesh packing
Aiouache, F., Abdelraouf, M., Hegarty, J., Rennie, A., Elizalde, R., Burns, N., Geekie, L. & Najdanovic, V., 1/09/2020, In: Ceramics International. 46, 13, p. 20777-20787 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion
Mohammadizadeh, M., Lu, H., Fidan, I., Tantawi, K., Gupta, A., Hasanov, S., Zhang, Z., Alifui-Segbaya, F. & Rennie, A., 24/08/2020, In: Inventions — Open Access Journal. 5, 3, 11 p., 44.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and Additive Manufacturing of a Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19)
Celik, H. K., Kose, O., Ulmeanu, M.-E., Rennie, A., Abram, T. & Akinci, I., 7/08/2020, In: International Journal of Bioprinting. 6, 4, 21 p., 286.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Potential Research Area Under Shadow In Engineering: Agricultural Machinery Design and Manufacturing
Celik, H. K., Rennie, A. & Akinci, I., 1/06/2020, In: ISPEC Journal of Agricultural Sciences. 4, 2, p. 66-86 21 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength-based Design Analysis of a Para-Plow Tillage Tool
Celik, H. K., Caglayan, N., Topakci, M., Rennie, A. & Akinci, I., 29/02/2020, In: Computers and Electronics in Agriculture. 169, 15 p., 105168.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2019
Published
Tool Life Performance of Injection Mould Tooling Fabricated by Selective Laser Melting for High-Volume Production
El Kashouty, M., Rennie, A. & Ghazy, M., 26/11/2019, In: Materials. 12, 23, 23 p., 3910.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental Platform to Facilitate Novel Back Brace Development for the Improvement of Spine Stability
Cooper, L., Gullane, A., Harvey, J., Hills, A., Zemura, M., Martindale, J., Rennie, A. & Cheneler, D., 16/09/2019, In: Computer Methods in Biomechanics and Biomedical Engineering. 22, 15, p. 1163-1173 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development
Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Mechanical collision simulation of potato tubers
Celik, H. K., Cinar, R., Yilmaz, D., Ulmeanu, M.-E., Rennie, A. E. W. & Akinci, I., 1/08/2019, In: Journal of Food Process Engineering. 42, 5, 7 p., e13078.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Requirements for large-scale adoption of rapid manufacturing technologies
Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Characterizing the fluid flow for Dixon Rings random packing
Aiouache, F., Abdelraouf, M., Najdanovic‐Visak, V. & Rennie, A., 21/05/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Minimal Waste Galvonometer Field Correction for Additive Manufacturing
King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Multivariable Regression Analysis for Optimised Mass Calculation of MEX 3D Printed Parts
Doicin, C.-V., Ulmeanu, M.-E., Rennie, A. & Lupeanu, E., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019). Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A potential research area under shadow in engineering: Agricultural machinery design and manufacturing
Celik, K., Rennie, A. & Akinci, I., 28/03/2019. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
2018
Published
Improved Tracheostomy Device
Laha, S. (Inventor), Adiele, A. C. (Inventor), Brewer, D. (Inventor), Ntelis, T. (Inventor), Pitman, S. (Inventor), Rennie, A. (Inventor) & Sheikh, Y. (Inventor), 8/11/2018, IPC No. A61M 16/04 (2006.01), Patent No. PCT/GB2018/051193, 3/05/2018, Priority date 3/05/2017, Priority No. 1707060.8
Research output: Patent
Published
Determination of Time Dependent Stress Distribution on a Potato Tuber during Drop Case
Caglayan, N., Oral, O., Celik, H. K., Cinar, R., Rodrigues, L. C. D. A., Rennie, A. E. W. & Akinci, I., 11/2018, In: Journal of Food Process Engineering. 41, 7, 7 p., e12869.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Determination of the Failure Susceptibility of a Flat Die used in Biomass Pelletizing Machines by means of FEA based Design Exploration
Celik, H. K., Yilmaz, H., Rennie, A. E. W., Cinar, R. & Firat, M. Z., 10/2018, In: Journal of Failure Analysis and Prevention. 18, 5, p. 1099-1110 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Short Review on 4D Printing
Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 07/2018, In: International Journal of 3D Printing Technologies and Digital Industry. 2, 2, p. 59-67 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rotation Rectilinear Scan Path Generation for Selective Laser Sintering
King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Walsh, S. M. R., 21/06/2018, Assises Europeennes de la Fabrication Additive.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
University Brand Management through Additive Manufacturing Applications
Doicin, C.-V., Ulmeanu, M.-E., Abram, T. N., Rennie, A. E. W., Cîtu , D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite Element Analysis of a PTO Shaft Used in an Agricultural Tractor
Celik, H. K., Cinar, R., Kunt, G., Rennie, A. E. W., Ucar, M. & Akinci, I., 15/05/2018, In: Ergonomics International Journal. 2, 3, 6 p., 000147.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Finite Element Analysis of a PTO Shaft used in an Agricultural Tractor
Celik, H. K., Cinar, R., Rennie, A. E. W., Ucar, M. & Akinci, I., 22/04/2018, p. 213-213. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
A Short Review on 4D Printing
Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Determination of Time Dependent Stress Distribution on Potato Tubers at Mechanical Collision
Celik, H. K., Cinar, R., Rennie, A. E. W., Ulmeanu, M.-E. & Akinci, I., 04/2018, CIGR 2018: XIX World Congress of CIGR: "Sustainable Life for Children". Akinci, I., Aykas, E. & Güngör , Ö. (eds.). Antalya, Turkey, p. 123 1 p. OP-081 [Section VI: Bioprocesses]
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
2017
Published
Post Processing Treatments on Laser Sintered Nylon 12
King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Bennett, G. R., 8/12/2017, Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. The Minerals, Metals & Materials Society (TMS), p. 1464-1471 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses
Celik, H. K., Rennie, A. E. W. & Caglayan, N., 12/2017, In: Journal of Agricultural Machinery Science. 13, 2, p. 107-112 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering
Celik, H. K., Caglayan, N. & Rennie, A. E. W., 10/2017, In: Journal of Food Process Engineering. 40, 5, 8 p., e12520.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses
Caglayan, N., Celik, H. K. & Rennie, A. E. W., 09/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering
King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Designing Digital Materials with Volumetric Gradients
Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication
Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals
Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Design and structural optimisation of a tractor mounted telescopic boom crane
Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products
Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Directing self-assembly to grow adaptive physical structures
Blaney, A., Dunn, N. S., Alexander, J. M., Richards, D., Rennie, A. E. W. & Anwar, J., 8/02/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 114-133 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Editorial: Rapid Design, Prototyping and Manufacturing
Bibb, R. (Guest editor) & Rennie, A. E. W. (Guest editor), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
2016
Published
3D printed facial laser scans for the production of localised radiotherapy treatment masks
Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump
Cinar, R., Ucar, M., Celik, K., Firat, M. Z. & Rennie, A., 04/2016, In: Experimental Techniques. 40, 2, p. 489-499 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Designing advanced filtration media through metal additive manufacturing
Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A. E. W., 03/2016, In: Chemical Engineering and Technology. 39, 3, p. 535-542 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Coupling self-assembling materials with digital designs to grow adaptive structures
Blaney, A., Alexander, J., Dunn, N., Richards, D., Doursat, R., Rennie, A. & Anwar, J., 2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference
Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.
Research output: Book/Report/Proceedings › Proceedings
2015
Published
Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation
Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Multi-material additive manufacture of multi-layer ceramic capacitors
King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An investigation into the use of additive manufacture for the production of metallic bipolar plates for polymer electrolyte fuel cell stacks
Dawson, R., Patel, A., Rennie, A. & White, S., 07/2015, In: Journal of Applied Electrochemistry. 45, 7, p. 637-645 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12
Nelson, J. A., Rennie, A., Abram, T., Bennett, G. R., Adiele, A., Tripp, M., Wood, M. & Galloway, G., 07/2015, In: Journal of Thermal Engineering. 1, 3, p. 159-165 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres
Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The lost crown of Horus
Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.
Research output: Contribution to specialist publication › Article
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials
Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts
Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis
Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 Next

Research

Professor Allan Rennie

Quick Links

Connect With Us