Home > Research > Researchers > Professor Allan Rennie > Publications

Research

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

201 - 244 out of 244Page size: 100
RSS feed of this list
  1. Published

    The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022

    Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis

    Celik, H. K., Akinci, I., Erkan, M. & Rennie, A., 31/07/2023, In: Journal of Food Process Engineering. 46, 11, 14 p., e14424.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions

    Celik, H. K., Gok, S., Caglayan, N. & Rennie, A., 27/08/2023, In: Applied Sciences. 13, 17, 15 p., 9682.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Structural Strength Analysis of a Rotary Drum Mower in Transportation Position

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Structural strength analysis of a rotary drum mower during harvesting

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/02/2024, In: Journal of Agricultural Engineering. 55, 1, 23 p., 1557.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Improved Durability of a Modular Axial Fixator for Stable and Unstable Proximal Femoral Fractures: A Patient-Specific Finite Element Analysis

    Celik, H. K., Icen, M., Ozdemir, H. & Rennie, A. E. W., 9/05/2024, In: Journal of Medical Devices. 18, 1, 22 p., 011007.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses

    Caglayan, N., Celik, H. K. & Rennie, A. E. W., 09/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  8. Published

    Determination of Time Dependent Stress Distribution on a Potato Tuber during Drop Case

    Caglayan, N., Oral, O., Celik, H. K., Cinar, R., Rodrigues, L. C. D. A., Rennie, A. E. W. & Akinci, I., 11/2018, In: Journal of Food Process Engineering. 41, 7, 7 p., e12869.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Novel filter designs that deliver filtration benefits produced by metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A. & Weston, D. P., 10/2013, Proceedings of AFS 2013 Fall Conference: Innovation in Filter Media and Membranes. 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  10. Published

    Design, innovation and a new age for filtration

    Burns, N., Geekie, L., Travis, D., Burns, M. & Rennie, A., 06/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  11. Published

    Improved filtration using additive manufacturing

    Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  12. Published

    Filtration efficiency gains by fabrication using additive manufacturing

    Burns, N., Vijayakumar, B., Rennie, A. & Geekie, L., 10/2014, Proceedings of the European Conference on Fluid-Particle Separation. 2 p. M3P2

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Maximising open area whilst retaining strength in novel metal additive manufactured filter media

    Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H. & Rennie, A., 10/2014. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  14. Published

    Innovations in filtration through additive manufacturing: Paper: EP140165

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  15. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  16. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A. E. W., 03/2016, In: Chemical Engineering and Technology. 39, 3, p. 535-542 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Variable fused deposition modelling: analysis of benefits, concept design and tool path generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    Variable Fused Deposition Modelling – Concept Design and Tool Path Generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  19. Published

    3D printed facial laser scans for the production of localised radiotherapy treatment masks

    Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Rapid design, prototyping and manufacture: proceedings of the seventh national conference on

    Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.

    Research output: Book/Report/Proceedings › Book

  22. Published

    Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports

    Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.

    Research output: Book/Report/Proceedings › Book

  23. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  24. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  25. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  26. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  27. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  28. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on

    Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.

    Research output: Book/Report/Proceedings › Proceedings

  29. Published

    Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    Directing self-assembly to grow adaptive physical structures

    Blaney, A., Dunn, N. S., Alexander, J. M., Richards, D., Rennie, A. E. W. & Anwar, J., 8/02/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 114-133 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Adaptive Materials: Utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Rennie, A. & Anwar, J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  32. Published

    Coupling self-assembling materials with digital designs to grow adaptive structures

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Doursat, R., Rennie, A. & Anwar, J., 2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  33. Published

    Editorial: Rapid Design, Prototyping and Manufacturing

    Bibb, R. (Guest editor) & Rennie, A. E. W. (Guest editor), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  34. Published

    Templates for consumer use in designing customised products

    Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  35. Published

    Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

    Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  36. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  37. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 04/2011, In: International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME). 1, 2, p. 1-18 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Unpublished

    A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050

    Appleby, M., Lambert, C. & Rennie, A., 12/2009, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  39. Published

    A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  41. Published

    Opportunities offered by additive manufacturing in creative businesses: informing designers

    Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  42. Published

    Sol-gel alumina coating of wired mesh packing

    Aiouache, F., Abdelraouf, M., Hegarty, J., Rennie, A., Elizalde, R., Burns, N., Geekie, L. & Najdanovic, V., 1/09/2020, In: Ceramics International. 46, 13, p. 20777-20787 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Characterizing the fluid flow for Dixon Rings random packing

    Aiouache, F., Abdelraouf, M., Najdanovic‐Visak, V. & Rennie, A., 21/05/2019.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  44. Published

    Tuning the wettability of wire mesh column: pore-scale flow analysis

    Abdelraouf, M., Rennie, A., Burns, N., Geekie, L., Najdanovic-Visak, V. & Aiouache, F., 15/11/2021, In: Chemical Engineering Journal Advances. 8, 15 p., 100181.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 Next

Back to top